git.openwrt.org Git - openwrt/staging/blogic.git/log

Merge branch 'for-3.11' of git://linux-nfs.org/~bfields/linux

Pull nfsd fix from Bruce Fields:
"One more nfsd bugfix for 3.11"

* 'for-3.11' of git://linux-nfs.org/~bfields/linux:
nfsd: nfsd_open: when dentry_open returns an error do not propagate as struct file

Merge tag 'md/3.11-fixes' of git://neil.brown.name/md

Pull md fixes from Neil Brown:
"Two more bugfixes for md in 3.11

  Both marked for -stable, both since 3.3.  I guess I should spend more
  time testing..."

* tag 'md/3.11-fixes' of git://neil.brown.name/md:
  md/raid5: fix interaction of 'replace' and 'recovery'.
  md/raid10: remove use-after-free bug.

Merge branch 'for-3.11-fixes' of git://git./linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
"Assorted libata updates.

  The most critical one is a fix for ahci oops during boot.  Also, a new
  smallish platform ahci driver is added and sata_inic162x is marked
  clearly as experimental (it whines during boot too) as data corruption
  seems rather common on the device and it's unlikely to get any love in
  the foreseeable future.  If the whining doesn't draw any attention, I
  think we'd probably be better of making the driver depend on BROKEN in
  a couple releases"

This is v2 of this pull request with fixed dependencies for ahci_imx.

* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci_imx: depend on CONFIG_MFD_SYSCON
  ahci_imx: add ahci sata support on imx platforms
  ARM: imx6q: update the sata bits definitions of gpr13
  ahci: fix Null pointer dereference in achi_host_active()
  libata: make it clear that sata_inic162x is experimental
  libata: replace strict_strtol() with kstrtol()
  ata: Fix DVD not dectected at some platform with Wellsburg PCH

ahci_imx: depend on CONFIG_MFD_SYSCON

ahci_imx makes use of regmap but the dependency wasn't specified in
Kconfig leading build failures if CONFIG_AHCI_IMX is enabled but
CONFIG_MFD_SYSCON is not. Add the Kconfig dependency.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>

md/raid5: fix interaction of 'replace' and 'recovery'.

If a device in a RAID4/5/6 is being replaced while another is being
recovered, then the writes to the replacement device currently don't
happen, resulting in corruption when the replacement completes and the
new drive takes over.

This is because the replacement writes are only triggered when
's.replacing' is set and not when the similar 's.sync' is set (which
is the case during resync and recovery - it means all devices need to
be read).

So schedule those writes when s.replacing is set as well.

In this case we cannot use "STRIPE_INSYNC" to record that the
replacement has happened as that is needed for recording that any
parity calculation is complete.  So introduce STRIPE_REPLACED to
record if the replacement has happened.

For safety we should also check that STRIPE_COMPUTE_RUN is not set.
This has a similar effect to the "s.locked == 0" test.  The latter
ensure that now IO has been flagged but not started.  The former
checks if any parity calculation has been flagged by not started.
We must wait for both of these to complete before triggering the
'replace'.

Add a similar test to the subsequent check for "are we finished yet".
This possibly isn't needed (is subsumed in the STRIPE_INSYNC test),
but it makes it more obvious that the REPLACE will happen before we
think we are finished.

Finally if a NeedReplace device is not UPTODATE then that is an
error.  We really must trigger a warning.

This bug was introduced in commit 9a3e1101b827a59ac9036a672f5fa8d5279d0fe2
(md/raid5:  detect and handle replacements during recovery.)
which introduced replacement for raid5.
That was in 3.3-rc3, so any stable kernel since then would benefit
from this fix.

Cc: stable@vger.kernel.org (3.3+)
Reported-by: qindehua <13691222965@163.com>
Tested-by: qindehua <qindehua@163.com>
Signed-off-by: NeilBrown <neilb@suse.de>

md/raid10: remove use-after-free bug.

We always need to be careful when calling generic_make_request, as it
can start a chain of events which might free something that we are
using.

Here is one place I wasn't careful enough. If the wbio2 is not in
use, then it might get freed at the first generic_make_request call.
So perform all necessary tests first.

This bug was introduced in 3.3-rc3 (24afd80d99) and can cause an
oops, so fix is suitable for any -stable since then.

Cc: stable@vger.kernel.org (3.3+)
Signed-off-by: NeilBrown <neilb@suse.de>

Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

Pull powerpc fixes from Ben Herrenschmidt:
"Here is a series of powerpc fixes.  It's a bit big, mostly because of
  the series of 11 "EEH" patches from Gavin.  The EEH (Our IBM specific
  PCI/PCIe Enhanced Error Handling) code had been rotting for a while
  and this merge window saw a significant rework & fixing of it by Gavin
  Shan.

  However, that wasn't complete and left some open issues.  There were
  still a few corner cases that didn't work properly, for example in
  relation to hotplug and devices without explicit error handlers.  We
  had some patches but they weren't quite good enough yet so I left them
  off the 3.11 merge window.

  Gavin since then fixed it all up, we ran quite a few rounds of testing
  and it seems fairly solid (at least probably more than it has ever
  been).  This should probably have made -rc1 but both Gavin and I took
  some vacation so it had to wait for -rc2.

  The rest is more bug fixes, mostly to new features recently added, for
  example, we missed the cpu table entry for one of the two models of P8
  (we didn't realize they had different PVR [Processor Version Register]
  values), some module CRC issues, etc..."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (23 commits)
  powerpc/perf: BHRB filter configuration should follow the task
  powerpc/perf: Ignore separate BHRB privilege state filter request
  powerpc/powernv: Mark pnv_pci_init_ioda2_phb() as __init
  powerpc/mm: Use the correct SLB(LLP) encoding in tlbie instruction
  powerpc/mm: Fix fallthrough bug in hpte_decode
  powerpc/pseries: Fix a typo in pSeries_lpar_hpte_insert()
  powerpc/eeh: Introdce flag to protect sysfs
  powerpc/eeh: Fix unbalanced enable for IRQ
  powerpc/eeh: Don't use pci_dev during BAR restore
  powerpc/eeh: Use partial hotplug for EEH unaware drivers
  powerpc/pci: Partial tree hotplug support
  powerpc/eeh: Use safe list traversal when walking EEH devices
  powerpc/eeh: Keep PE during hotplug
  powerpc/pci/hotplug: Don't need to remove from EEH cache twice
  powerpc/pci: Override pcibios_release_device()
  powerpc/eeh: Export functions for hotplug
  powerpc/eeh: Remove reference to PCI device
  powerpc: Fix the corrupt r3 error during MCE handling.
  powerpc/perf: Set PPC_FEATURE2_EBB when we register the power8 PMU
  powerpc/pseries: Drop "select HOTPLUG"
  ...

Merge git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
"This push fixes a memory corruption issue in caam, as well as
  reverting the new optimised crct10dif implementation as it breaks boot
  on initrd systems.

  Hopefully crct10dif will be reinstated once the supporting code is
  added so that it doesn't break boot"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  Revert "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework"
  crypto: caam - Fixed the memory out of bound overwrite issue

ahci_imx: add ahci sata support on imx platforms

imx6q contains one Synopsys AHCI SATA controller, But it can't share
ahci_platform driver with other controllers because there are some
misalignments of the generic AHCI controller - the bits definitions of
the HBA registers, the Vendor Specific registers, the AHCI PHY clock
and the AHCI signals adjustment window(GPR13 register).

- CAP_SSS(bit20) of the HOST_CAP is writable, default value is '0',
   should be configured to be '1'

- bit0 (only one AHCI SATA port on imx6q) of the HOST_PORTS_IMPL
   should be set to be '1'.(default 0)

- One Vendor Specific register HOST_TIMER1MS(offset:0xe0) should be
   configured regarding to the frequency of AHB bus clock.

- Configurations of the AHCI PHY clock, and the signal parameters of
   the GPR13

Setup its own ahci sata driver, contained the imx6q specific
initialized codes, re-use the generic ahci_platform driver, and keep
the generic ahci_platform driver clean as much as possible.

tj: patch description reformatted

Signed-off-by: Richard Zhu <r65037@freescale.com>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

ARM: imx6q: update the sata bits definitions of gpr13

Replace the SATA_PHY_# by the more readable definitons.

tj: Being routed through libata branch to enable implementation of
ahci_imx.

Signed-off-by: Richard Zhu <r65037@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

Revert "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework"

This reverts commits
    67822649d7305caf3dd50ed46c27b99c94eff996
    39761214eefc6b070f29402aa1165f24d789b3f7
    0b95a7f85718adcbba36407ef88bba0a7379ed03
    31d939625a9a20b1badd2d4e6bf6fd39fa523405
    2d31e518a42828df7877bca23a958627d60408bc

Unfortunately this change broke boot on some systems that used an
initrd which does not include the newly created crct10dif modules.
As these modules are required by sd_mod under certain configurations
this is a serious problem.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

powerpc/perf: BHRB filter configuration should follow the task

When the task moves around the system, the corresponding cpuhw
per cpu strcuture should be popullated with the BHRB filter
request value so that PMU could be configured appropriately with
that during the next call into power_pmu_enable().

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/perf: Ignore separate BHRB privilege state filter request

Completely ignore BHRB privilege state filter request as we are
already configuring that with privilege state filtering attribute
for the accompanying PMU event. This would help achieve cleaner
user space interaction for BHRB.

This patch fixes a situation like this

Before patch:-
------------
./perf record -j any -e branch-misses:k ls
Error:
The sys_perf_event_open() syscall returned with 95 (Operation not
supported) for event (branch-misses:k).
/bin/dmesg may provide additional information.
No CONFIG_PERF_EVENTS=y kernel support configured?

Here 'perf record' actually copies over ':k' filter request into BHRB
privilege state filter config and our previous check in kernel would
fail that.

After patch:-
-------------
./perf record -j any -e branch-misses:k ls
perf perf.data perf.data.old test-mmap-ring
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (~102 samples)]

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/powernv: Mark pnv_pci_init_ioda2_phb() as __init

Mark pnv_pci_init_ioda2_phb() as __init.  It is called only from an
init function (pnv_pci_init()), and it calls an init function
(pnv_pci_init_ioda_phb()):

    pnv_pci_init                # init
      pnv_pci_init_ioda2_phb    # non-init
pnv_pci_init_ioda_phb   # init

This should fix a section mismatch warning.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/mm: Use the correct SLB(LLP) encoding in tlbie instruction

The sllp value is stored in mmu_psize_defs in such a way that we can easily OR
the value to get the operand for slbmte instruction. ie, the L and LP bits are
not contiguous. Decode the bits and use them correctly in tlbie.
regression is introduced by 1f6aaaccb1b3af8613fe45781c1aefee2ae8c6b3
"powerpc: Update tlbie/tlbiel as per ISA doc"

Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/mm: Fix fallthrough bug in hpte_decode

We should not fallthrough different case statements in hpte_decode. Add
break statement to break out of the switch. The regression is introduced by
dcda287a9b26309ae43a091d0ecde16f8f61b4c0 "powerpc/mm: Simplify hpte_decode"

Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/pseries: Fix a typo in pSeries_lpar_hpte_insert()

Commit 801eb73f45371accc78ca9d6d22d647eeb722c11 introduced
a bug while checking PTE flags. We have to drop the _PAGE_COHERENT flag
when __PAGE_NO_CACHE is set and the cache update policy is not write-through
(i.e. _PAGE_WRITETHRU is not set)

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
CC: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/eeh: Introdce flag to protect sysfs

The patch introduces flag EEH_DEV_SYSFS to keep track that the sysfs
entries for the corresponding EEH device (then PCI device) has been
added or removed, in order to avoid race condition.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/eeh: Fix unbalanced enable for IRQ

The patch fixes following issue:

Unbalanced enable for IRQ 23
------------[ cut here ]------------
WARNING: at kernel/irq/manage.c:437
:
NIP [c00000000016de8c] .__enable_irq+0x11c/0x140
LR [c00000000016de88] .__enable_irq+0x118/0x140
Call Trace:
[c000003ea1f23880] [c00000000016de88] .__enable_irq+0x118/0x140 (unreliable)
[c000003ea1f23910] [c00000000016df08] .enable_irq+0x58/0xa0
[c000003ea1f239a0] [c0000000000388b4] .eeh_enable_irq+0xc4/0xe0
[c000003ea1f23a30] [c000000000038a28] .eeh_report_reset+0x78/0x130
[c000003ea1f23ac0] [c000000000037508] .eeh_pe_dev_traverse+0x98/0x170
[c000003ea1f23b60] [c0000000000391ac] .eeh_handle_normal_event+0x2fc/0x3d0
[c000003ea1f23bf0] [c000000000039538] .eeh_handle_event+0x2b8/0x2c0
[c000003ea1f23c90] [c000000000039600] .eeh_event_handler+0xc0/0x170
[c000003ea1f23d30] [c0000000000da9a0] .kthread+0xf0/0x100
[c000003ea1f23e30] [c00000000000a1dc] .ret_from_kernel_thread+0x5c/0x80

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/eeh: Don't use pci_dev during BAR restore

While restoring BARs for one specific PCI device, the pci_dev
instance should have been released. So it's not reliable to use
the pci_dev instance on restoring BARs. However, we still need
some information (e.g. PCIe capability position, header type) from
the pci_dev instance. So we have to store those information to
EEH device in advance.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/eeh: Use partial hotplug for EEH unaware drivers

When EEH error happens to one specific PE, some devices with drivers
supporting EEH won't except hotplug on the device. However, there
might have other deivces without driver, or with driver without EEH
support. For the case, we need do partial hotplug in order to make
sure that the PE becomes absolutely quite during reset. Otherise,
the PE reset might fail and leads to failure of error recovery.

The current code doesn't handle that 'mixed' case properly, it either
uses the error callbacks to the drivers, or tries hotplug, but doesn't
handle a PE (EEH domain) composed of a combination of the two.

The patch intends to support so-called "partial" hotplug for EEH:
Before we do reset, we stop and remove those PCI devices without
EEH sensitive driver. The corresponding EEH devices are not detached
from its PE, but with special flag. After the reset is done, those
EEH devices with the special flag will be scanned one by one.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/pci: Partial tree hotplug support

When EEH error happens to one specific PE, the device drivers
of its attached EEH devices (PCI devices) are checked to see
the further action: reset with complete hotplug, or reset without
hotplug. However, that's not enough for those PCI devices whose
drivers can't support EEH, or those PCI devices without driver.
So we need do so-called "partial hotplug" on basis of PCI devices.
In the situation, part of PCI devices of the specific PE are
unplugged and plugged again after PE reset.

The patch changes pcibios_add_pci_devices() so that it can support
full hotplug and so-called "partial" hotplug based on device-tree
or real hardware. It's notable that pci_of_scan.c has been changed
for a bit in order to support the "partial" hotplug based on dev-tree.

Most of the generic code already supports that, we just need to
plumb it properly on our side.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/eeh: Use safe list traversal when walking EEH devices

Currently, we're trasversing the EEH devices list using list_for_each_entry().
That's not safe enough because the EEH devices might be removed from
its parent PE while doing iteration. The patch replaces that with
list_for_each_entry_safe().

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/eeh: Keep PE during hotplug

When we do normal hotplug, the PE (shadow EEH structure) shouldn't be
kept around.

However, we need to keep it if the hotplug an artifial one caused by
EEH errors recovery.

Since we remove EEH device through the PCI hook pcibios_release_device(),
the flag "purge_pe" passed to various functions is meaningless. So the patch
removes the meaningless flag and introduce new flag "EEH_PE_KEEP"
to save the PE while doing hotplug during EEH error recovery.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/pci/hotplug: Don't need to remove from EEH cache twice

Since pcibios_release_device() called by pci_stop_and_remove_bus_device()
has removed the device from the EEH cache, we needn't do that again.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/pci: Override pcibios_release_device()

The patch overrides pcibios_release_device() to release EEH
resources (EEH cache, unbinding EEH device) for the indicated PCI
device.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/eeh: Export functions for hotplug

Make some functions public in order to support hotplug on either specific
PCI bus or PCI device in future.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/eeh: Remove reference to PCI device

We will rely on pcibios_release_device() to remove the EEH cache
and unbind EEH device for the specific PCI device. So we shouldn't
hold the reference to the PCI device from EEH cache and EEH device.
Otherwise, pcibios_release_device() won't be called as we expected.
The patch removes the reference to the PCI device in EEH core.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Fix the corrupt r3 error during MCE handling.

During Machine Check interrupt on pseries platform, R3 generally points to
memory region inside RTAS (FWNMI) area. We see r3 corruption because when RTAS
delivers the machine check exception it passes the address inside FWNMI area
with the top most bit set. This patch fixes this issue by masking top two bit
in machine check exception handler.

Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/perf: Set PPC_FEATURE2_EBB when we register the power8 PMU

The presence or absence of EBB is advertised to userspace via the presence
or absence of PPC_FEATURE2_EBB in cpu_user_features2.

Because the kernel can be built without PMU support, we should only add
PPC_FEATURE2_EBB to cpu_user_features2 when we successfully register the
power8 PMU support.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/pseries: Drop "select HOTPLUG"

The Kconfig symbol HOTPLUG was removed with commit 40b313608a ("Finally
eradicate CONFIG_HOTPLUG"). But there's still one select statement for
that symbol. It seems that select statement was added after the patch to
remove CONFIG_HOTPLUG was submitted. Anyhow, it is useless and can be
dropped.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Access local paca after hard irq disabled

In hard_irq_disable(), we accessed the PACA before we hard disabled
the interrupts, potentially causing a warning as get_paca() will
us debug_smp_processor_id().

Move that to after the disabling, and also use local_paca directly
rather than get_paca() to avoid several redundant and useless checks.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc/modules: Module CRC relocation fix causes perf issues

Module CRCs are implemented as absolute symbols that get resolved by
a linker script. We build an intermediate .o that contains an
unresolved symbol for each CRC. genksysms parses this .o, calculates
the CRCs and writes a linker script that "resolves" the symbols to
the calculated CRC.

Unfortunately the ppc64 relocatable kernel sees these CRCs as symbols
that need relocating and relocates them at boot. Commit d4703aef
(module: handle ppc64 relocating kcrctabs when CONFIG_RELOCATABLE=y)
added a hook to reverse the bogus relocations. Part of this patch
created a symbol at 0x0:

# head -2 /proc/kallsyms
0000000000000000 T reloc_start
c000000000000000 T .__start

This reloc_start symbol is causing lots of confusion to perf. It
thinks reloc_start is a massive function that stretches from 0x0 to
0xc000000000000000 and we get various cryptic errors out of perf,
including:

problem incrementing symbol count, skipping event

This patch removes the reloc_start linker script label and instead
defines it as PHYSICAL_START. We also need to wrap it with
CONFIG_PPC64 because the ppc32 kernel can set a non zero
PHYSICAL_START at compile time and we wouldn't want to subtract
it from the CRCs in that case.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc: Add second POWER8 PVR entry

POWER8 comes with two different PVRs. This patch enables the additional
PVR in the cputable.

The existing entry (PVR=0x4b) is renamed to POWER8E and the new entry
(PVR=0x4d) is given POWER8.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Merge tag 'please-pull-bp-edac' of git://git./linux/kernel/git/ras/ras

Pull EDAC fix from Tony Luck:
"Fix EDAC lockdep splat"

* tag 'please-pull-bp-edac' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Fix lockdep splat

Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux

Pull device tree bug fixes and maintainership updates from Grant Likely:
"This branch contains a couple of minor bug fixes and documentation
  additions, but the bulk of it are several changes to the MAINTAINERS
  file regarding the subsystems I've been involved with"

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux:
  of/irq: init struct resource to 0 in of_irq_to_resource()
  of/irq: Avoid calling list_first_entry() for empty list
  of: add vendor prefixes for hisilicon
  of: add vendor prefix for Qualcomm Atheros, Inc.
  MAINTAINERS: Fix incorrect status tag
  MAINTAINERS: Refactor device tree maintainership
  MAINTAINERS: Change device tree mailing list
  MAINTAINERS: Remove Grant Likely

EDAC: Fix lockdep splat

Fix the following:

BUG: key ffff88043bdd0330 not in .data!
------------[ cut here ]------------
WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0()
DEBUG_LOCKS_WARN_ON(1)
Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode
CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1
Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013
0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958
ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000
ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc
Call Trace:
  dump_stack
  warn_slowpath_common
  warn_slowpath_fmt
  lockdep_init_map
  ? trace_hardirqs_on_caller
  ? trace_hardirqs_on
  debug_mutex_init
  __mutex_init
  bus_register
  edac_create_sysfs_mci_device
  edac_mc_add_mc
  sbridge_probe
  pci_device_probe
  driver_probe_device
  __driver_attach
  ? driver_probe_device
  bus_for_each_dev
  driver_attach
  bus_add_driver
  driver_register
  __pci_register_driver
  ? 0xffffffffa0010fff
  sbridge_init
  ? 0xffffffffa0010fff
  do_one_initcall
  load_module
  ? unset_module_init_ro_nx
  SyS_init_module
  tracesys
---[ end trace d24a70b0d3ddf733 ]---
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0
EDAC sbridge: Driver loaded.

What happens is that bus_register needs a statically allocated lock_key
because the last is handed in to lockdep. However, struct mem_ctl_info
embeds struct bus_type (the whole struct, not a pointer to it) and the
whole thing gets dynamically allocated.

Fix this by using a statically allocated struct bus_type for the MC bus.

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: stable@kernel.org # v3.10
Signed-off-by: Tony Luck <tony.luck@intel.com>

Merge branch 'for-3.11-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup changes from Tejun Heo:
"This contains two patches, both of which aren't fixes per-se but I
  think it'd be better to fast-track them.

  One removes bcache_subsys_id which was added without proper review
  through the block tree.  Fortunately, bcache cgroup code is
  unconditionally disabled, so this was never exposed to userland.  The
  cgroup subsys_id is removed.  Kent will remove the affected (disabled)
  code through bcache branch.

  The other simplifies task_group_path_from_hierarchy().  The function
  doesn't currently have in-kernel users but there are external code and
  development going on dependent on the function and making the function
  available for 3.11 would make things go smoother"

* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: replace task_cgroup_path_from_hierarchy() with task_cgroup_path()
  cgroup: remove bcache_subsys_id which got added stealthily

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"This is just a regular fixes pull, mostly nouveau and i915, the i915
  ones fix RC6 on Sandybridge after suspend/resume, which I think people
  have be wanting for quite a while!

  Now you shouldn't wish for more patches, as the new mutex/reservation
  code found a number of problems with the qxl driver, and it currently
  makes lockdep angry, I'm working on a set of fixes for it, but its a
  bit large, I'll submit them separately later today or tomorrow once
  I've banged on them a bit more, just warning you in advance :-)"

Yeah, I'm definitely over the whole "wish for more patches" thing.

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/crtc-helper: explicit DPMS on after modeset
  drm/i915: fix up gt init sequence fallout
  drm/i915: Serialize almost all register access
  drm/i915: quirk no PCH_PWM_ENABLE for Dell XPS13 backlight
  drm/i915: correctly restore fences with objects attached
  drm/i915: Fix dereferencing invalid connectors in is_crtc_connector_off()
  drm/i915: Sanitize shared dpll state
  drm/i915: fix long-standing SNB regression in power consumption after resume v2
  drm/i915: Preserve the DDI_A_4_LANES bit from the bios
  drm/i915: fix pfit regression for non-autoscaled resolutions
  drm/i915: fix up readout of the lvds dither bit on gen2/3
  drm/nouveau: do not allow negative sizes for now
  drm/nouveau: add falcon interrupt handler
  drm/nouveau: use dedicated channel for async moves on GT/GF chipsets.
  drm/nouveau: bump fence timeout to 15 seconds
  drm/nouveau: do not unpin in nouveau_gem_object_del
  drm/nv50/kms: fix pin refcnt leaks
  drm/nouveau: fix some error-path leaks in fbcon handling code
  drm/nouveau: fix locking issues in page flipping paths

Fix __wait_on_atomic_t() to call the action func if the counter != 0

Fix __wait_on_atomic_t() so that it calls the action func if the counter != 0
rather than if the counter is 0 so as to be analogous to __wait_on_bit().

Thanks to Yacine who found this by visual inspection.

This will affect FS-Cache in that it will could fail to sleep correctly when
trying to clean up after a netfs cookie is withdrawn.

Reported-by: Yacine Belkadi <yacine.belkadi.1@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
cc: Milosz Tanski <milosz@adfin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/mattst88/alpha

Pull alpha architecture fixes from Matt Turner:
"This contains mostly clean ups and fixes but also an implementation of
  atomic64_dec_if_positive() and a pair of new syscalls"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: Use handle_percpu_irq for the timer interrupt
  alpha: Force the user-visible HZ to a constant 1024.
  alpha: Don't if-out dp264_device_interrupt.
  alpha: Use __builtin_alpha_rpcc
  alpha: Fix type compatibility warning for marvel_map_irq
  alpha: Generate dwarf2 unwind info for various kernel entry points.
  alpha: Implement atomic64_dec_if_positive
  alpha: Improve atomic_add_unless
  alpha: Modernize lib/mpi/longlong.h
  alpha: Add kcmp and finit_module syscalls
  alpha: locks: remove unused arch_*_relax operations
  alpha: kernel: typo issue, using '1' instead of '11'
  alpha: kernel: using memcpy() instead of strcpy()
  alpha: Convert print_symbol to %pSR

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull vhost fixes from Michael Tsirkin:
"vhost: more fixes for 3.11

  This includes some fixes for vhost net and scsi drivers.

  The test module has already been reworked to avoid rcu usage, but the
  necessary core changes are missing, we fixed this.

  Unlikely to affect any real-world users, but it's early in the cycle
  so, let's merge them"

(It was earlier when Michael originally sent the email, but it somehot
got missed in the flood, so here it is after -rc2)

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: Remove custom vhost rcu usage
  vhost-scsi: Always access vq->private_data under vq mutex
  vhost-net: Always access vq->private_data under vq mutex

Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

Pull fuse bugfixes from Miklos Szeredi:
"These are bugfixes and a cleanup to the "readdirplus" feature"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: readdirplus: cleanup
  fuse: readdirplus: change attributes once
  fuse: readdirplus: fix instantiate
  fuse: readdirplus: sanity checks
  fuse: readdirplus: fix dentry leak

NFSv4: Fix brainfart in attribute length calculation

The calculation of the attribute length was 4 bytes off.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Reported-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nfsd: nfsd_open: when dentry_open returns an error do not propagate as struct file

The following call chain:
------------------------------------------------------------
nfs4_get_vfs_file
- nfsd_open
  - dentry_open
    - do_dentry_open
      - __get_file_write_access
        - get_write_access
          - return atomic_inc_unless_negative(&inode->i_writecount) ? 0 : -ETXTBSY;
------------------------------------------------------------

can result in the following state:
------------------------------------------------------------
struct nfs4_file {
...
  fi_fds = {0xffff880c1fa65c80, 0xffffffffffffffe6, 0x0},
  fi_access = {{
      counter = 0x1
    }, {
      counter = 0x0
    }},
...
------------------------------------------------------------

1) First time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is
NULL, hence nfsd_open() is called where we get status set to an error
and fp->fi_fds[O_WRONLY] to -ETXTBSY. Thus we do not reach
nfs4_file_get_access() and fi_access[O_WRONLY] is not incremented.

2) Second time around, in nfs4_get_vfs_file() fp->fi_fds[O_WRONLY] is
NOT NULL (-ETXTBSY), so nfsd_open() is NOT called, but
nfs4_file_get_access() IS called and fi_access[O_WRONLY] is incremented.
Thus we leave a landmine in the form of the nfs4_file data structure in
an incorrect state.

3) Eventually, when __nfs4_file_put_access() is called it finds
fi_access[O_WRONLY] being non-zero, it decrements it and calls
nfs4_file_put_fd() which tries to fput -ETXTBSY.
------------------------------------------------------------
...
     [exception RIP: fput+0x9]
     RIP: ffffffff81177fa9  RSP: ffff88062e365c90  RFLAGS: 00010282
     RAX: ffff880c2b3d99cc  RBX: ffff880c2b3d9978  RCX: 0000000000000002
     RDX: dead000000100101  RSI: 0000000000000001  RDI: ffffffffffffffe6
     RBP: ffff88062e365c90   R8: ffff88041fe797d8   R9: ffff88062e365d58
     R10: 0000000000000008  R11: 0000000000000000  R12: 0000000000000001
     R13: 0000000000000007  R14: 0000000000000000  R15: 0000000000000000
     ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
  #9 [ffff88062e365c98] __nfs4_file_put_access at ffffffffa0562334 [nfsd]
#10 [ffff88062e365cc8] nfs4_file_put_access at ffffffffa05623ab [nfsd]
#11 [ffff88062e365ce8] free_generic_stateid at ffffffffa056634d [nfsd]
#12 [ffff88062e365d18] release_open_stateid at ffffffffa0566e4b [nfsd]
#13 [ffff88062e365d38] nfsd4_close at ffffffffa0567401 [nfsd]
#14 [ffff88062e365d88] nfsd4_proc_compound at ffffffffa0557f28 [nfsd]
#15 [ffff88062e365dd8] nfsd_dispatch at ffffffffa054543e [nfsd]
#16 [ffff88062e365e18] svc_process_common at ffffffffa04ba5a4 [sunrpc]
#17 [ffff88062e365e98] svc_process at ffffffffa04babe0 [sunrpc]
#18 [ffff88062e365eb8] nfsd at ffffffffa0545b62 [nfsd]
#19 [ffff88062e365ee8] kthread at ffffffff81090886
#20 [ffff88062e365f48] kernel_thread at ffffffff8100c14a
------------------------------------------------------------

Cc: stable@vger.kernel.org
Signed-off-by: Harshula Jayasuriya <harshula@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

ahci: fix Null pointer dereference in achi_host_active()

commit b29900e6 (AHCI: Make distinct names for ports in /proc/interrupts)
introuded a regression, which resulted Null pointer dereference for achi
host with dummy ports. For ahci ports, when the port is dummy port, its
private_data will be NULL, as ata_dummy_port_ops doesn't support ->port_start.

changes in v2: use pp to check dummy ports, update comments

Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Xiaotian Feng <xtfeng@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alexander Gordeev <agordeev@redhat.com>
Cc: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Merge tag 'trace-3.11-rc2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes and cleanups from Steven Rostedt:
"This contains fixes, optimizations and some clean ups

  Some of the fixes need to go back to 3.10.  They are minor, and deal
  mostly with incorrect ref counting in accessing event files.

  There was a couple of optimizations that should have perf perform a
  bit better when accessing trace events.

  And some various clean ups.  Some of the clean ups are necessary to
  help in a fix to a theoretical race between opening a event file and
  deleting that event"

* tag 'trace-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Kill the unbalanced tr->ref++ in tracing_buffers_open()
  tracing: Kill trace_array->waiter
  tracing: Do not (ab)use trace_seq in event_id_read()
  tracing: Simplify the iteration logic in f_start/f_next
  tracing: Add ref_data to function and fgraph tracer structs
  tracing: Miscellaneous fixes for trace_array ref counting
  tracing: Fix error handling to ensure instances can always be removed
  tracing/kprobe: Wait for disabling all running kprobe handlers
  tracing/perf: Move the PERF_MAX_TRACE_SIZE check into perf_trace_buf_prepare()
  tracing/syscall: Avoid perf_trace_buf_*() if sys_data->perf_events is empty
  tracing/function: Avoid perf_trace_buf_*() if event_function.perf_events is empty
  tracing: Typo fix on ring buffer comments
  tracing: Use trace_seq_puts()/trace_seq_putc() where possible
  tracing: Use correct config guard CONFIG_STACK_TRACER

Merge branch 'next' of git://git./linux/kernel/git/rzhang/linux

Pull thermal management fixes from Zhang Rui:
"These are fixes collected over the last week, they fixes several
  problems caused by the x86_pkg_temp_thermal introduced in 3.11-rc1.

  Specifics:

   - the x86_pkg_temp_thermal driver causes crash on systems with no
     package MSR support as there is a bug in the logic to check
     presence of DTHERM and PTS feature together.  Added a change so
     that when there is no PTS support, module doesn't get loaded.

   - fix krealloc() misuse in pkg_temp_thermal_device_add().

     If krealloc() returns NULL, it doesn't free the original.  Thus if
     we want to exit because of the krealloc() failure, we must make
     sure the original one is freed.

   - The error code path of the x86 package temperature thermal driver's
     initialization routine makes an unbalanced call to
     get_online_cpus(), which causes subsequent CPU offline operations,
     and consequently system suspend, to permanently block in
     cpu_hotplug_begin() on systems where get_core_online() returns an
     error code.

     Remove the extra get_online_cpus() to fix the problem"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  Thermal: Fix lockup of cpu_down()
  Thermal: x86_pkg_temp: Limit number of pkg temp zones
  Thermal: x86_pkg_temp: fix krealloc() misuse in in pkg_temp_thermal_device_add()
  Thermal: x86 package temp thermal crash

Merge tag 'gpio-for-v3.11-2' of git://git./linux/kernel/git/linusw/linux-gpio

Pull gpio fixes from Linus Walleij:
"A first round of GPIO fixes for the v3.11 series:
   - OMAP device tree boot fix
   - Handle an error condition in the MSM driver

  The OMAP patches have been around since around the merge window, but
  since they first caused more breakage I let them boil in -next for a
  while.  These should be fine now"

* tag 'gpio-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  drivers: gpio: msm: Fix the error condition for reading ngpio
  gpio/omap: fix build error when OF_GPIO is not defined.
  gpio/omap: auto request GPIO as input if used as IRQ via DT
  gpio/omap: don't create an IRQ mapping for every GPIO on DT

Merge branch 'for-3.11/drivers' of git://git.kernel.dk/linux-block

Pull block IO driver bits from Jens Axboe:
"As I mentioned in the core block pull request, due to real life
  circumstances the driver pull request would be late.  Now it looks
  like -rc2 late...  On the plus side, apart form the rsxx update, these
  are all things that I could argue could go in later in the cycle as
  they are fixes and not features.  So even though things are late, it's
  not ALL bad.

  The pull request contains:

   - Updates to bcache, all bug fixes, from Kent.

   - A pile of drbd bug fixes (no big features this time!).

   - xen blk front/back fixes.

   - rsxx driver updates, some of them deferred form 3.10.  So should be
     well cooked by now"

* 'for-3.11/drivers' of git://git.kernel.dk/linux-block: (63 commits)
  bcache: Allocation kthread fixes
  bcache: Fix GC_SECTORS_USED() calculation
  bcache: Journal replay fix
  bcache: Shutdown fix
  bcache: Fix a sysfs splat on shutdown
  bcache: Advertise that flushes are supported
  bcache: check for allocation failures
  bcache: Fix a dumb race
  bcache: Use standard utility code
  bcache: Update email address
  bcache: Delete fuzz tester
  bcache: Document shrinker reserve better
  bcache: FUA fixes
  drbd: Allow online change of al-stripes and al-stripe-size
  drbd: Constants should be UPPERCASE
  drbd: Ignore the exit code of a fence-peer handler if it returns too late
  drbd: Fix rcu_read_lock balance on error path
  drbd: fix error return code in drbd_init()
  drbd: Do not sleep inside rcu
  bcache: Refresh usage docs
  ...

libata: make it clear that sata_inic162x is experimental

sata_inic162x never reached a state where it's reliable enough for
production use and data corruption is a relatively common occurrence.
Make the driver generate warning about the issues and mark the Kconfig
option as experimental.

If the situation doesn't improve, we'd be better off making it depend
on CONFIG_BROKEN. Let's wait for several cycles and see if the kernel
message draws any attention.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Martin Braure de Calignon <braurede@free.fr>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Reported-by: risc4all@yahoo.com

libata: replace strict_strtol() with kstrtol()

The usage of strict_strtol() is not preferred, because
strict_strtol() is obsolete. Thus, kstrtol() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

of/irq: init struct resource to 0 in of_irq_to_resource()

It almost does not matter because most users use only the ->start member
of the struct. However if this struct is passed to a platform device
which is then added via platform_device_add() then the ->parent member is
also used.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Grant Likely <grant.likely@linaro.org>

of/irq: Avoid calling list_first_entry() for empty list

list_first_entry() expects the list is not empty, we need to check if list is
empty before calling list_first_entry(). Thus use list_first_entry_or_null()
instead of list_first_entry().

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>

of: add vendor prefixes for hisilicon

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Grant Likely <grant.likely@linaro.org>

of: add vendor prefix for Qualcomm Atheros, Inc.

This prefix will be used in various compatible properties
for the devices from Qualcomm Atheros, Inc.

Cc: Luis R. Rodriguez <rodrigue@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@linaro.org>

MAINTAINERS: Fix incorrect status tag

When I removed myself from the xilinx drivers I used the wrong tag. Fix
it.

Signed-off-by: Grant Likely <grant.likely@linaro.org>

MAINTAINERS: Refactor device tree maintainership

Device tree bindings require a lot more attention than they used to.
We've got a group of volunteers willing to take over maintaining
bindings. This patch adds them to the MAINTAINERS file.

This group still needs to work out a process for maintainership and how
they are going to work together. I recommend that they set up a shared
tree on git.kernel.org that they each have commit access to similar to
the tip tree or the arm-soc tree, but it is up to them.

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

MAINTAINERS: Change device tree mailing list

New list on vger.kernel.org. The old list was a pain to moderate.

Signed-off-by: Grant Likely <grant.likely@linaro.org>

MAINTAINERS: Remove Grant Likely

Unfortunately, I'm no longer to spend the time needed on maintainership.
It is time for me to step aside and pass maintainership to other
engineers. I'm not disappearing from Linux development, but it would be
irresponsible for me to hold onto a job that I am unable to do.

v2: Leave my name on devicetree core code maintainership. Rob NAKed that
part of the patch. :)

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Linux Walleij <linus.walleij@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <rob.herring@calxeda.com>

Merge tag 'drm-intel-fixes-2013-07-22' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes

- fixup panel fitter readout for gen2/3 (just quitens dmesg noise)
- fix pft computations for non-autoscaled resolutions (i.e. letter/pillar
  boxing on gen2/3)
- preserve the DDI A/E lane sharing bit (Stéphane Marchesin)
- fix the "rc6 fails to work after resume" regression, big thanks to
  Konstantin Khlebnikov for the patch and debug insight about what
  actually might be going on here
- fix Oops in is_crtc_connector_off (Chris)
- sanitize shared dpll state - our new paranoid state checker tripped up
  over dirt left behind by the BIOS
- correctly restore fences, fixes the "my screen is all messed up after
  resume" regression introduced in the final 3.10 pull request
- quirk backlights harder, this time for Dell XPS13 machines to fix a
  regression (patch from Kamal Mostafa)
- 90% fix for some haswell hangs when accessing registers concurrently,
  the 100% solution is simply too invasive for -fixes and what we have
  here seems to be good enough (Chris)

* tag 'drm-intel-fixes-2013-07-22' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: fix up gt init sequence fallout
  drm/i915: Serialize almost all register access
  drm/i915: quirk no PCH_PWM_ENABLE for Dell XPS13 backlight
  drm/i915: correctly restore fences with objects attached
  drm/i915: Fix dereferencing invalid connectors in is_crtc_connector_off()
  drm/i915: Sanitize shared dpll state
  drm/i915: fix long-standing SNB regression in power consumption after resume v2
  drm/i915: Preserve the DDI_A_4_LANES bit from the bios
  drm/i915: fix pfit regression for non-autoscaled resolutions
  drm/i915: fix up readout of the lvds dither bit on gen2/3

Thermal: Fix lockup of cpu_down()

Commit f1a18a105 "Thermal: CPU Package temperature thermal" had code
that did a get_online_cpus(), run a loop and then do a
put_online_cpus(). The problem is that the loop had an error exit that
would skip the put_online_cpus() part.

In the error exit part of the function, it also did a get_online_cpus(),
run a loop and then put_online_cpus(). The only way to get to the error
exit part is with get_online_cpus() already performed. If this error
condition is hit, the system will be prevented from taking CPUs offline.
The process taking the CPU offline will lock up hard.

Removing the get_online_cpus() removes the lockup as the hotplug CPU
refcount is back to zero.

This was bisected with ktest.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6

Fixes for some locking issues, and fence timeouts.

* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau: do not allow negative sizes for now
  drm/nouveau: add falcon interrupt handler
  drm/nouveau: use dedicated channel for async moves on GT/GF chipsets.
  drm/nouveau: bump fence timeout to 15 seconds
  drm/nouveau: do not unpin in nouveau_gem_object_del
  drm/nv50/kms: fix pin refcnt leaks
  drm/nouveau: fix some error-path leaks in fbcon handling code
  drm/nouveau: fix locking issues in page flipping paths

drm/crtc-helper: explicit DPMS on after modeset

Atm the crtc helper implementation of set_config has really
inconsisten semantics: If just an fb update is good enough, dpms state
will be left as-is, but if we do a full modeset we force everything to
dpms on.

This change has already been applied to the i915 modeset code in

commit e3de42b68478a8c95dd27520e9adead2af9477a5
Author: Imre Deak <imre.deak@intel.com>
Date:   Fri May 3 19:44:07 2013 +0200

    drm/i915: force full modeset if the connector is in DPMS OFF mode

which according to Greg KH seems to aim for a new record in most
Bugzilla: links in a commit message.

The history of this dpms forcing is pretty interesting. This patch
here is an almost-revert of

commit 811aaa55ba21ab37407018cfc01770d6b037d3fb
Author: Keith Packard <keithp@keithp.com>
Date:   Thu Feb 3 16:57:28 2011 -0800

    drm: Only set DPMS ON when actually configuring a mode

which fixed the bug of trying to dpms on disabled outputs, but
introduced the new discrepancy between an fb update only and full
modesets. The actual introduction of this goes back to

commit bf9dc102e284a5aa78c73fc9d72e11d5ccd8669f
Author: Keith Packard <keithp@keithp.com>
Date:   Fri Nov 26 10:45:58 2010 -0800

    drm: Set connector DPMS status to ON in drm_crtc_helper_set_config

And if you'd dig around in the i915 driver code there's even more fun
around forcing dpms on and losing our heads and temper of the
resulting inconsistencies. Especially the DP re-training code had tons
of funny stuff in it.

v2: So v1 totally blew up on resume on my radeon system here. After
much head-scraching I've figured out that the radeon resume functions
resumes the console system _before_ it actually restores all the
modeset state. And resuming the console systems means that fbdev doeas
an immediate ->set_par call.

Now up to this patch that ->set_par did absolutely nothing: All the
old sw state from pre-suspend was still around (since the modeset
reset wasn't done yet), which means that the set_config calls done as
a result of the ->set_par where all treated as no-ops (despite that
the real hw state was obviously something completely different).

Since v1 of this patch just added a bunch of ->dpms calls if the crtc
was enabled, those set_config calls suddenly stopped being no-ops. But
because the hw state wasn't restored the ->dpms callbacks resulted in
decent amounts of hilarity and eventual full hangs.

Since I can't review all kms drivers for such tricky ordering
constraints v2 opts for a different approach and forces a full modeset
if the connector dpms state isnt' DPMS_ON. Since the ->dpms callbacks
implemented by the modeset helpers update the connector->dpms property
we have the same effect of ensuring that the pipe is ultimately turned
on, even if we just end up updating the fb. This is the same approac
we ended up using in the intel driver.

Note that besides i915.ko only all other drivers eventually call
drm_helper_connector_dpms with the exception of vmwgfx, which does not
support dmps at all.

v3: Dave Airlie merged the broken first version of this patch, so
squash in the revert of

commit 372835a8527f85b3eff20a18c2c339e827dfd4e4
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sat Jun 15 00:13:13 2013 +0200

    drm/crtc-helper: explicit DPMS on after modeset

Also fix up the spelling fail a bit in the commit message while at it.

Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67043
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Linux 3.11-rc2

Merge tag 'acpi-video-3.11' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI video support fixes from Rafael Wysocki:
"I'm sending a separate pull request for this as it may be somewhat
  controversial.  The breakage addressed here is not really new and the
  fixes may not satisfy all users of the affected systems, but we've had
  so much back and forth dance in this area over the last several weeks
  that I think it's time to actually make some progress.

  The source of the problem is that about a year ago we started to tell
  BIOSes that we're compatible with Windows 8, which we really need to
  do, because some systems shipping with Windows 8 are tested with it
  and nothing else, so if we tell their BIOSes that we aren't compatible
  with Windows 8, we expose our users to untested BIOS/AML code paths.

  However, as it turns out, some Windows 8-specific AML code paths are
  not tested either, because Windows 8 actually doesn't use the ACPI
  methods containing them, so if we declare Windows 8 compatibility and
  attempt to use those ACPI methods, things break.  That occurs mostly
  in the backlight support area where in particular the _BCM and _BQC
  methods are plain unusable on some systems if the OS declares Windows
  8 compatibility.

  [ The additional twist is that they actually become usable if the OS
    says it is not compatible with Windows 8, but that may cause
    problems to show up elsewhere ]

  Investigation carried out by Matthew Garrett indicates that what
  Windows 8 does about backlight is to leave backlight control up to
  individual graphics drivers.  At least there's evidence that it does
  that if the Intel graphics driver is used, so we've decided to follow
  Windows 8 in that respect and allow i915 to control backlight (Daniel
  likes that part).

  The first commit from Aaron Lu makes ACPICA export the variable from
  which we can infer whether or not the BIOS believes that we are
  compatible with Windows 8.

  The second commit from Matthew Garrett prepares the ACPI video driver
  by making it initialize the ACPI backlight even if it is not going to
  be used afterward (that is needed for backlight control to work on
  Thinkpads).

  The third commit implements the actual workaround making i915 take
  over backlight control if the firmware thinks it's dealing with
  Windows 8 and is based on the work of multiple developers, including
  Matthew Garrett, Chun-Yi Lee, Seth Forshee, and Aaron Lu.

  The final commit from Aaron Lu makes us follow Windows 8 by informing
  the firmware through the _DOS method that it should not carry out
  automatic brightness changes, so that brightness can be controlled by
  GUI.

  Hopefully, this approach will allow us to avoid using blacklists of
  systems that should not declare Windows 8 compatibility just to avoid
  backlight control problems in the future.

   - Change from Aaron Lu makes ACPICA export a variable which can be
     used by driver code to determine whether or not the BIOS believes
     that we are compatible with Windows 8.

   - Change from Matthew Garrett makes the ACPI video driver initialize
     the ACPI backlight even if it is not going to be used afterward
     (that is needed for backlight control to work on Thinkpads).

   - Fix from Rafael J Wysocki implements Windows 8 backlight support
     workaround making i915 take over bakclight control if the firmware
     thinks it's dealing with Windows 8.  Based on the work of multiple
     developers including Matthew Garrett, Chun-Yi Lee, Seth Forshee,
     and Aaron Lu.

   - Fix from Aaron Lu makes the kernel follow Windows 8 by informing
     the firmware through the _DOS method that it should not carry out
     automatic brightness changes, so that brightness can be controlled
     by GUI"

* tag 'acpi-video-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: no automatic brightness changes by win8-compatible firmware
  ACPI / video / i915: No ACPI backlight if firmware expects Windows 8
  ACPI / video: Always call acpi_video_init_brightness() on init
  ACPICA: expose OSI version

drm/i915: fix up gt init sequence fallout

The regression fix for gen6+ rps fallout

commit 7dcd2677ea912573d9ed4bcd629b0023b2d11505
Author: Konstantin Khlebnikov <khlebnikov@openvz.org>
Date: Wed Jul 17 10:22:58 2013 +0400

drm/i915: fix long-standing SNB regression in power consumption after resume

unintentionally also changed the init sequence ordering between
gt_init and gt_reset - we need to reset BIOS damage like leftover
forcewake references before we run our own code. Otherwise we can get
nasty dmesg noise like

[drm:__gen6_gt_force_wake_mt_get] *ERROR* Timed out waiting for forcewake old ack to clear.

again. Since _reset suggests that we first need to have stuff
initialized (which isn't the case here) call it sanitze instead.

While at it also block out the rps disable introduced by the above
commit on ilk: We don't have any knowledge of ilk rps being broken in
similar ways. And the disable functions uses the default hw state
which is only read out when we're enabling rps. So essentially we've
been writing random grabage into that register.

Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@vger.kernel.org
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4

Pull ext[34] tmpfile bugfix from Ted Ts'o:
"Fix regression caused by commit af51a2ac36d1f which added ->tmpfile()
  support (along with a similar fix for ext3)"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext3: fix a BUG when opening a file with O_TMPFILE flag
  ext4: fix a BUG when opening a file with O_TMPFILE flag

ext3: fix a BUG when opening a file with O_TMPFILE flag

When we try to open a file with O_TMPFILE flag, we will trigger a bug.
The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and
this check always fails because we set ->i_nlink = 1 in
inode_init_always().  We can use the following program to trigger it:

int main(int argc, char *argv[])
{
int fd;

fd = open(argv[1], O_TMPFILE, 0666);
if (fd < 0) {
perror("open ");
return -1;
}
close(fd);
return 0;
}

The oops message looks like this:

kernel: kernel BUG at fs/ext3/namei.c:1992!
kernel: invalid opcode: 0000 [#1] SMP
kernel: Modules linked in: ext4 jbd2 crc16 cpufreq_ondemand ipv6 dm_mirror dm_region_hash dm_log dm_mod parport_pc parport serio_raw sg dcdbas pcspkr i2c_i801 ehci_pci ehci_hcd button acpi_cpufreq mperf e1000e ptp pps_core ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core ext3 jbd sd_mod ahci libahci libata scsi_mod uhci_hcd
kernel: CPU: 0 PID: 2882 Comm: tst_tmpfile Not tainted 3.11.0-rc1+ #4
kernel: Hardware name: Dell Inc. OptiPlex 780 /0V4W66, BIOS A05 08/11/2010
kernel: task: ffff880112d30050 ti: ffff8801124d4000 task.ti: ffff8801124d4000
kernel: RIP: 0010:[<ffffffffa00db5ae>] [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3]
kernel: RSP: 0018:ffff8801124d5cc8  EFLAGS: 00010202
kernel: RAX: 0000000000000000 RBX: ffff880111510128 RCX: ffff8801114683a0
kernel: RDX: 0000000000000000 RSI: ffff880111510128 RDI: ffff88010fcf65a8
kernel: RBP: ffff8801124d5d18 R08: 0080000000000000 R09: ffffffffa00d3b7f
kernel: R10: ffff8801114683a0 R11: ffff8801032a2558 R12: 0000000000000000
kernel: R13: ffff88010fcf6800 R14: ffff8801032a2558 R15: ffff8801115100d8
kernel: FS:  00007f5d172b5700(0000) GS:ffff880117c00000(0000) knlGS:0000000000000000
kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
kernel: CR2: 00007f5d16df15d0 CR3: 0000000110b1d000 CR4: 00000000000407f0
kernel: Stack:
kernel: 000000000000000c ffff8801048a7dc8 ffff8801114685a8 ffffffffa00b80d7
kernel: ffff8801124d5e38 ffff8801032a2558 ffff88010ce24d68 0000000000000000
kernel: ffff88011146b300 ffff8801124d5d44 ffff8801124d5d78 ffffffffa00db7e1
kernel: Call Trace:
kernel: [<ffffffffa00b80d7>] ? journal_start+0x8c/0xbd [jbd]
kernel: [<ffffffffa00db7e1>] ext3_tmpfile+0xb2/0x13b [ext3]
kernel: [<ffffffff821076f8>] path_openat+0x11f/0x5e7
kernel: [<ffffffff821c86b4>] ? list_del+0x11/0x30
kernel: [<ffffffff82065fa2>] ?  __dequeue_entity+0x33/0x38
kernel: [<ffffffff82107cd5>] do_filp_open+0x3f/0x8d
kernel: [<ffffffff82112532>] ? __alloc_fd+0x50/0x102
kernel: [<ffffffff820f9296>] do_sys_open+0x13b/0x1cd
kernel: [<ffffffff820f935c>] SyS_open+0x1e/0x20
kernel: [<ffffffff82398c02>] system_call_fastpath+0x16/0x1b
kernel: Code: 39 c7 0f 85 67 01 00 00 0f b7 03 25 00 f0 00 00 3d 00 40 00 00 74 18 3d 00 80 00 00 74 11 3d 00 a0 00 00 74 0a 83 7b 48 00 74 04 <0f> 0b eb fe 49 8b 85 50 03 00 00 4c 89 f6 48 c7 c7 c0 99 0e a0
kernel: RIP  [<ffffffffa00db5ae>] ext3_orphan_add+0x6a/0x1eb [ext3]
kernel: RSP <ffff8801124d5cc8>

Here we couldn't call clear_nlink() directly because in d_tmpfile() we
will call inode_dec_link_count() to decrease ->i_nlink.  So this commit
tries to call d_tmpfile() before ext4_orphan_add() to fix this problem.

Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>

ext4: fix a BUG when opening a file with O_TMPFILE flag

When we try to open a file with O_TMPFILE flag, we will trigger a bug.
The root cause is that in ext4_orphan_add() we check ->i_nlink == 0 and
this check always fails because we set ->i_nlink = 1 in
inode_init_always().  We can use the following program to trigger it:

int main(int argc, char *argv[])
{
int fd;

fd = open(argv[1], O_TMPFILE, 0666);
if (fd < 0) {
perror("open ");
return -1;
}
close(fd);
return 0;
}

The oops message looks like this:

kernel BUG at fs/ext4/namei.c:2572!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: dlci bridge stp hidp cmtp kernelcapi l2tp_ppp l2tp_netlink l2tp_core sctp libcrc32c rfcomm tun fuse nfnetli
nk can_raw ipt_ULOG can_bcm x25 scsi_transport_iscsi ipx p8023 p8022 appletalk phonet psnap vmw_vsock_vmci_transport af_key vmw_vmci rose vsock atm can netrom ax25 af_rxrpc ir
da pppoe pppox ppp_generic slhc bluetooth nfc rfkill rds caif_socket caif crc_ccitt af_802154 llc2 llc snd_hda_codec_realtek snd_hda_intel snd_hda_codec serio_raw snd_pcm pcsp
kr edac_core snd_page_alloc snd_timer snd soundcore r8169 mii sr_mod cdrom pata_atiixp radeon backlight drm_kms_helper ttm
CPU: 1 PID: 1812571 Comm: trinity-child2 Not tainted 3.11.0-rc1+ #12
Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010
task: ffff88007dfe69a0 ti: ffff88010f7b6000 task.ti: ffff88010f7b6000
RIP: 0010:[<ffffffff8125ce69>]  [<ffffffff8125ce69>] ext4_orphan_add+0x299/0x2b0
RSP: 0018:ffff88010f7b7cf8  EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff8800966d3020 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88007dfe70b8 RDI: 0000000000000001
RBP: ffff88010f7b7d40 R08: ffff880126a3c4e0 R09: ffff88010f7b7ca0
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801271fd668
R13: ffff8800966d2f78 R14: ffff88011d7089f0 R15: ffff88007dfe69a0
FS:  00007f70441a3740(0000) GS:ffff88012a800000(0000) knlGS:00000000f77c96c0
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000002834000 CR3: 0000000107964000 CR4: 00000000000007e0
DR0: 0000000000780000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
Stack:
0000000000002000 00000020810b6dde 0000000000000000 ffff88011d46db00
ffff8800966d3020 ffff88011d7089f0 ffff88009c7f4c10 ffff88010f7b7f2c
ffff88007dfe69a0 ffff88010f7b7da8 ffffffff8125cfac ffff880100000004
Call Trace:
[<ffffffff8125cfac>] ext4_tmpfile+0x12c/0x180
[<ffffffff811cba78>] path_openat+0x238/0x700
[<ffffffff8100afc4>] ? native_sched_clock+0x24/0x80
[<ffffffff811cc647>] do_filp_open+0x47/0xa0
[<ffffffff811db73f>] ? __alloc_fd+0xaf/0x200
[<ffffffff811ba2e4>] do_sys_open+0x124/0x210
[<ffffffff81010725>] ? syscall_trace_enter+0x25/0x290
[<ffffffff811ba3ee>] SyS_open+0x1e/0x20
[<ffffffff816ca8d4>] tracesys+0xdd/0xe2
[<ffffffff81001001>] ? start_thread_common.constprop.6+0x1/0xa0
Code: 04 00 00 00 89 04 24 31 c0 e8 c4 77 04 00 e9 43 fe ff ff 66 25 00 d0 66 3d 00 80 0f 84 0e fe ff ff 83 7b 48 00 0f 84 04 fe ff ff <0f> 0b 49 8b 8c 24 50 07 00 00 e9 88 fe ff ff 0f 1f 84 00 00 00

Here we couldn't call clear_nlink() directly because in d_tmpfile() we
will call inode_dec_link_count() to decrease ->i_nlink.  So this commit
tries to call d_tmpfile() before ext4_orphan_add() to fix this problem.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Tested-by: Darrick J. Wong <darrick.wong@oracle.com>
Tested-by: Dave Jones <davej@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'staging-3.11-rc2' of git://git./linux/kernel/git/gregkh/staging

Pull staging tree fixes from Greg KH:
"Here are a few iio driver fixes for 3.11-rc2.  They are still spread
  across drivers/iio and drivers/staging/iio so they are coming in
  through this tree.

  I've also removed the drivers/staging/csr/ driver as the developers
  who originally sent it to me have moved on to other companies, and CSR
  still will not send us the specs for the device, making the driver
  pretty much obsolete and impossible to fix up.  Deleting it now
  prevents people from sending in lots of tiny codingsyle fixes that
  will never go anywhere.

  It also helps to offset the large lustre filesystem merge that
  happened in 3.11-rc1 in the overall 3.11.0 diffstat.  :)"

* tag 'staging-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: csr: remove driver
  iio: lps331ap: Fix wrong in_pressure_scale output value
  iio staging: fix lis3l02dq, read error handling
  staging:iio:ad7291: add missing .driver_module to struct iio_info
  iio: ti_am335x_adc: add missing .driver_module to struct iio_info
  iio: mxs-lradc: Remove useless check in read_raw
  iio: mxs-lradc: Fix misuse of iio->trig
  iio: inkern: fix iio_convert_raw_to_processed_unlocked
  iio: Fix iio_channel_has_info
  iio:trigger: device_unregister->device_del to avoid double free
  iio: dac: ad7303: fix error return code in ad7303_probe()

drivers: gpio: msm: Fix the error condition for reading ngpio

of_property_read_u32 return 0 on success. The check was using a ! to
return error. Fix the if condition.

Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Pankaj Jangra <jangra.pankaj9@gmail.com>
Cc: "Bird, Tim" <Tim.Bird@sonymobile.com>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull vfs fixes from Al Viro:
"The sget() one is a long-standing bug and will need to go into -stable
  (in fact, it had been originally caught in RHEL6), the other two are
  3.11-only"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: constify dentry parameter in d_count()
  livelock avoidance in sget()
  allow O_TMPFILE to work with O_WRONLY

Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 bugfixes from Ted Ts'o:
"Fixes for 3.11-rc2, sent at 5pm, in the professoinal style.  :-)"

I'm not sure I like this new level of "professionalism".
9-5, people, 9-5.

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: call ext4_es_lru_add() after handling cache miss
  ext4: yield during large unlinks
  ext4: make the extent_status code more robust against ENOMEM failures
  ext4: simplify calculation of blocks to free on error
  ext4: fix error handling in ext4_ext_truncate()

Merge tag 'nfs-for-3.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
- Fix a regression against NFSv4 FreeBSD servers when creating a new
   file
- Fix another regression in rpc_client_register()

* tag 'nfs-for-3.11-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Fix a regression against the FreeBSD server
  SUNRPC: Fix another issue with rpc_client_register()

Merge branch 'for-linus' of git://git./linux/kernel/git/josef/btrfs-next

Pull btrfs fixes from Josef Bacik:
"I'm playing the role of Chris Mason this week while he's on vacation.
  There are a few critical fixes for btrfs here, all regressions and
  have been tested well"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next:
  Btrfs: fix wrong write offset when replacing a device
  Btrfs: re-add root to dead root list if we stop dropping it
  Btrfs: fix lock leak when resuming snapshot deletion
  Btrfs: update drop progress before stopping snapshot dropping

gpio/omap: fix build error when OF_GPIO is not defined.

The OMAP GPIO driver check if the chip has an associated
Device Tree node using the struct gpio_chip of_node member.

But this is only build if CONFIG_OF_GPIO is defined which
leads to the following error when using omap1_defconfig:

linux/drivers/gpio/gpio-omap.c: In function 'omap_gpio_chip_init':
linux/drivers/gpio/gpio-omap.c:1080:17: error: 'struct gpio_chip' has no member named 'of_node'
linux/drivers/gpio/gpio-omap.c: In function 'omap_gpio_irq_map':
linux/drivers/gpio/gpio-omap.c:1116:16: error: 'struct gpio_chip' has no member named 'of_node'

Reported-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio/omap: auto request GPIO as input if used as IRQ via DT

When an OMAP GPIO is used as an IRQ line, a call to gpio_request()
has to be made to initialize the OMAP GPIO bank before a driver
request the IRQ. Otherwise the call to request_irq() fails.

Drives should not be aware of this neither care wether an IRQ line
is a GPIO or not. They should just request the IRQ and this has to
be handled by the irq_chip driver.

With the current OMAP GPIO DT binding, if we define:

    gpio6: gpio@49058000 {
        compatible = "ti,omap3-gpio";
   reg = <0x49058000 0x200>;
   interrupts = <34>;
   ti,hwmods = "gpio6";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
    };

   interrupt-parent = <&gpio6>;
           interrupts = <16 8>;

The GPIO is correctly mapped as an IRQ but a call to gpio_request()
is never made. Since a call to the custom IRQ domain .map function
handler is made for each GPIO used as an IRQ, the GPIO can be setup
and configured as input there automatically.

Changes since v3:
  - Use bank->chip.of_node instead of_have_populated_dt() to check
    DT or legacy boot as suggested by Jean-Christophe PLAGNIOL-VILLARD
  - Add a comment that this is just a temporary solution until and
    that it has to be removed once is handled by the IRQ core.

Changes since v2:
- Only make the call to gpio_request_one() conditional in the DT
   case as suggested by Grant Likely.

Changes since v1:
  - Split the irq domain mapping function handler and the GPIO
    request in two different patches.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio/omap: don't create an IRQ mapping for every GPIO on DT

When a GPIO is defined as an interrupt line using Device
Tree, a call to irq_create_of_mapping() is made that calls
irq_create_mapping(). So, is not necessary to do the mapping
for all OMAP GPIO lines and explicitly call irq_create_mapping()
on the driver probe() when booting with Device Tree.

Add a custom IRQ domain .map function handler that will be
called by irq_create_mapping() to map the GPIO lines used as IRQ.
This also allows to execute needed setup code such as configuring
a GPIO as input and enabling the GPIO bank.

Changes since v3:
  - Use bank->chip.of_node instead of_have_populated_dt() to check
    DT or legacy boot as suggested by Jean-Christophe PLAGNIOL-VILLARD

Changes since v2:
  - Unconditionally do the IRQ setup in the .map() function and
    only call irq_create_mapping() in the gpio chip init to avoid
    code duplication as suggested by Grant Likely.

Changes since v1:
  - Split the addition of the .map function handler and the
    automatic gpio request in two different patches.
  - Add GPIO IRQ setup logic to the irq domain mapping function.
  - Only call irq_create_mapping for every GPIO on legacy boot.
  - Only setup a GPIO IRQ on the .map function for DeviceTree boot.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drm/i915: Serialize almost all register access

In theory, the different register blocks were meant to be only ever
touched when holding either the struct_mutex, mode_config.lock or even a
specific localised lock. This does not seem to be the case, and the
hardware reacts extremely badly if we attempt to concurrently access two
registers within the same cacheline.

The HSD suggests that we only need to do this workaround for display
range registers. However, upon review we need to serialize the multiple
stages in our register write functions - if only for preemption
protection.

Irrespective of the hardware requirements, the current io functions are
a little too loose with respect to the combination of pre- and
post-condition testing that we do in conjunction with the actual io. As
a result, we may be pre-empted and generate both false-postive and
false-negative errors.

Note well that this is a "90%" solution, there remains a few direct
users of ioread/iowrite which will be fixed up in the next few patches.
Since they are more invasive and that this simple change will prevent
almost all lockups on Haswell, we kept this patch simple to facilitate
backporting to stable.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63914
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: quirk no PCH_PWM_ENABLE for Dell XPS13 backlight

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=47941
BugLink: https://bugs.launchpad.net/bugs/1163720
BugLink: https://bugs.launchpad.net/bugs/1162026
Some machines suffer from non-functional backlight controls if
BLM_PCH_PWM_ENABLE is set, so provide a quirk to avoid doing so.
Apply this quirk to Dell XPS 13 models.

Tested-by: Eric Griffith <EGriffith92@gmail.com>
Tested-by: Kent Baxley <kent.baxley@canonical.com>
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

vfs: constify dentry parameter in d_count()

so that it can be used in places like d_compare/d_hash
without causing a compiler warning.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

livelock avoidance in sget()

Eric Sandeen has found a nasty livelock in sget() - take a mount(2) about
to fail.  The superblock is on ->fs_supers, ->s_umount is held exclusive,
->s_active is 1.  Along comes two more processes, trying to mount the same
thing; sget() in each is picking that superblock, bumping ->s_count and
trying to grab ->s_umount.  ->s_active is 3 now.  Original mount(2)
finally gets to deactivate_locked_super() on failure; ->s_active is 2,
superblock is still ->fs_supers because shutdown will *not* happen until
->s_active hits 0.  ->s_umount is dropped and now we have two processes
chasing each other:
s_active = 2, A acquired ->s_umount, B blocked
A sees that the damn thing is stillborn, does deactivate_locked_super()
s_active = 1, A drops ->s_umount, B gets it
A restarts the search and finds the same superblock.  And bumps it ->s_active.
s_active = 2, B holds ->s_umount, A blocked on trying to get it
... and we are in the earlier situation with A and B switched places.

The root cause, of course, is that ->s_active should not grow until we'd
got MS_BORN.  Then failing ->mount() will have deactivate_locked_super()
shut the damn thing down.  Fortunately, it's easy to do - the key point
is that grab_super() is called only for superblocks currently on ->fs_supers,
so it can bump ->s_count and grab ->s_umount first, then check MS_BORN and
bump ->s_active; we must never increment ->s_count for superblocks past
->kill_sb(), but grab_super() is never called for those.

The bug is pretty old; we would've caught it by now, if not for accidental
exclusion between sget() for block filesystems; the things like cgroup or
e.g. mtd-based filesystems don't have anything of that sort, so they get
bitten.  The right way to deal with that is obviously to fix sget()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

allow O_TMPFILE to work with O_WRONLY

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge branch 'for-linus' of git://git./linux/kernel/git/rw/uml

Pull UML fixes from Richard Weinberger:
"Special thanks goes to Toralf Föster for continuously testing UML and
  reporting issues!"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: remove dead code
  um: siginfo cleanup
  uml: Fix which_tmpdir failure when /dev/shm is a symlink, and in other edge cases
  um: Fix wait_stub_done() error handling
  um: Mark stub pages mapping with VM_PFNMAP
  um: Fix return value of strnlen_user()

Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
"MIPS fixes for 3.11.  Half of then is for Netlogic the remainder
  touches things across arch/mips.

  Nothing really dramatic and by rc1 standards MIPS will be in fairly
  good shape with this applied.  Tested by building all MIPS defconfigs
  of which with this pull request four platforms won't build.  And yes,
  it boots also on my favorite test systems"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATION
  MIPS: Octeon: Fix DT pruning bug with pip ports
  MIPS: KVM: Mark KVM_GUEST (T&E KVM) as BROKEN_ON_SMP
  MIPS: tlbex: fix broken build in v3.11-rc1
  MIPS: Netlogic: Add XLP PIC irqdomain
  MIPS: Netlogic: Fix USB block's coherent DMA mask
  MIPS: tlbex: Fix typo in r3000 tlb store handler
  MIPS: BMIPS: Fix thinko to release slave TP from reset
  MIPS: Delete dead invocation of exception_exit().

Merge tag 'arm64-stable' of git://git./linux/kernel/git/cmarinas/linux-aarch64

Pull arm64 fixes from Catalin Marinas:
- Post -rc1 update to the common reboot infrastructure.
- Fixes (user cache maintenance fault handling, !COMPAT compilation,
   CPU online and interrupt hanlding).

* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: use common reboot infrastructure
  arm64: mm: don't treat user cache maintenance faults as writes
  arm64: add '#ifdef CONFIG_COMPAT' for aarch32_break_handler()
  arm64: Only enable local interrupts after the CPU is marked online

Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Martin Schwidefsky:
"An update for the BFP jit to the latest and greatest, two patches to
  get kdump working again, the random-abort ptrace extention for
  transactional execution, the z90crypt module alias for ap and a tiny
  cleanup"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/zcrypt: Alias for new zcrypt device driver base module
  s390/kdump: Allow copy_oldmem_page() copy to virtual memory
  s390/kdump: Disable mmap for s390
  s390/bpf,jit: add pkt_type support
  s390/bpf,jit: address randomize and write protect jit code
  s390/bpf,jit: use generic jit dumper
  s390/bpf,jit: call module_free() from any context
  s390/qdio: remove unused variable
  s390/ptrace: PTRACE_TE_ABORT_RAND

alpha: Use handle_percpu_irq for the timer interrupt

Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

alpha: Force the user-visible HZ to a constant 1024.

This kernel/user split was done long ago for other architectures.

Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

alpha: Don't if-out dp264_device_interrupt.

The code as written is correct, and will be used by QEMU emulation.

Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

alpha: Use __builtin_alpha_rpcc

As introduced in gcc 3.2.

Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

alpha: Fix type compatibility warning for marvel_map_irq

Acked-by: Phil Carmody <pc+lkml@asdf.org>
Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

alpha: Generate dwarf2 unwind info for various kernel entry points.

Having unwind info past the PALcode generated stack frame makes
debugging the kernel significantly easier.

Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

alpha: Implement atomic64_dec_if_positive

Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

alpha: Improve atomic_add_unless

Use ll/sc loops instead of C loops around cmpxchg.
Update the atomic64_add_unless block comment to match the code.

Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

alpha: Modernize lib/mpi/longlong.h

Remove the compile warning for __udiv_qrnnd not having a prototype.
Use the __builtin_alpha_umulh introduced in gcc 4.0.

Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

alpha: Add kcmp and finit_module syscalls

Reviewed-and-Tested-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>

alpha: locks: remove unused arch_*_relax operations

The arch_{spin,read,write}_relax macros are not used anywhere in the
kernel and are typically just aliases for cpu_relax().

This patch removes the unused definitions for Alpha.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

alpha: kernel: typo issue, using '1' instead of '11'

For sending message:

        *(unsigned int *)&cpu->ipc_buffer[0] = len;
        cp1 = (char *) &cpu->ipc_buffer[1];

But for receive message:

                cnt = cpu->ipc_buffer[0] >> 32;
                ...
                       cp1 = (char *) &cpu->ipc_buffer[11];

They are not pairs, it is typo issue of the redundency '1'.

So need use '1' instead of '11'.

Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Chen Gang <gang.chen@asianux.com>