Tianling Shen [Sat, 6 Jul 2024 07:30:31 +0000 (15:30 +0800)]
mediatek: add ABT ASR3000 support
Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: 128 MB SPI-NAND
RAM: 256MB
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset, Mesh
Power: DC 12V 1A
Gain telnet access:
1. Login into web interface, and download the configuration.
2. Decode and uncompress the configuration:
* Enter fakeroot if you are not login as root.
base64 -d e-xxxxxxxxxxxx-cfg.tar.gz | tar -zx
3. Edit 'etc/passwd', remove root password: 'root::1:0:99999:7:::'.
4. Edit 'etc/rc.local', insert telnetd command before 'exit 0':
( sleep 3s; /usr/sbin/telnetd; ) &
5. Repack the configuration:
tar -zc etc/ | base64 > e-xxxxxxxxxxxx-cfg.tar.gz
6. Upload new configuration via web interface, now you can connect to
ASR3000 via telnet.
Flash instructions:
1. Connect to ASR3000, backup everything, especially 'Factory' part.
2. Write new BL2:
mtd write openwrt-mediatek-filogic-abt_asr3000-preloader.bin BL2
3. Write new FIP:
mtd write openwrt-mediatek-filogic-abt_asr3000-bl31-uboot.fip FIP
4. Set static IP on your PC:
IP 192.168.1.254/24, GW 192.168.1.1
5. Serve OpenWrt initramfs image using TFTP server.
6. Cut off the power and re-engage, wait for TFTP recovery to complete.
7. After OpenWrt has booted, perform sysupgrade.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/15887
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Mieczyslaw Nalewaj [Wed, 19 Jun 2024 12:49:44 +0000 (14:49 +0200)]
ramips: mt7620: remove kmod-switch-rtl8366-smi from package list
Remove kmod-switch-rtl8366-smi from the package list, as it is still loaded
because kmod-switch-rtl8367b depends on it
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/15757
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Aleksander Jan Bajkowski [Sat, 13 Jul 2024 10:36:02 +0000 (12:36 +0200)]
lantiq: fix checkpatch warnings in etop driver
This commit fixes all errors reported by the checkpatch script. This
should make it easier to accept upstream this patch.
There should be no functional changes.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/15939
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Aleksander Jan Bajkowski [Sat, 13 Jul 2024 10:11:34 +0000 (12:11 +0200)]
lantiq: properly release descriptors in etop driver detach
This patch fixes two issues in the driver detach:
* double free of the same descriptor (upstream bug, backported in
66177c081f1b05e4eb7f6c23d97954e8172c4336),
* releasing tx descriptor instead of rx (downstream bug).
The driver is compiled into the kernel that is why the error
is not visible in normal use.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/15939
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Sean Khan [Sat, 13 Jul 2024 20:40:30 +0000 (16:40 -0400)]
mac80211: fix kconf build warnings
This patch cleans up the following warnings during build:
"warning: format not a string literal"
```
conf.c: In function 'conf_askvalue':
conf.c:89:17: warning: format not a string literal and no format arguments [-Wformat-security]
89 | printf(_("(NEW) "));
| ^~~~~~
conf.c: In function 'conf_choice':
conf.c:285:33: warning: format not a string literal and no format arguments [-Wformat-security]
285 | printf(_(" (NEW)"));
| ^~~~~~
conf.c: In function 'check_conf':
conf.c:440:41: warning: format not a string literal and no format arguments [-Wformat-security]
440 | printf(_("*\n* Restart config...\n*\n"));
| ^~~~~~
conf.c: In function 'main':
conf.c:617:41: warning: format not a string literal and no format arguments [-Wformat-security]
617 | _("\n*** The configuration requires explicit update.\n\n"));
| ^
conf.c:669:25: warning: format not a string literal and no format arguments [-Wformat-security]
669 | fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n"));
| ^~~~~~~
conf.c:673:25: warning: format not a string literal and no format arguments [-Wformat-security]
673 | fprintf(stderr, _("\n*** Error during update of the configuration.\n\n"));
| ^~~~~~~
conf.c:684:25: warning: format not a string literal and no format arguments [-Wformat-security]
684 | fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n"));
| ^~~~~~~
```
And POSIX Yacc warnings
```
lex -ozconf.lex.c -L zconf.l
yacc -ozconf.tab.c -t -l zconf.y
zconf.y:34.1-7: warning: POSIX Yacc does not support %expect [-Wyacc]
34 | %expect 32
| ^~~~~~~
zconf.y:97.1-11: warning: POSIX Yacc does not support %destructor [-Wyacc]
97 | %destructor {
| ^~~~~~~~~~~
gcc -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -DKBUILD_NO_NLS -c -o zconf.tab.o zconf.tab.c
gcc conf.o zconf.tab.o -o conf
```
After:
gcc -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -DKBUILD_NO_NLS -c -o conf.o conf.c
yacc -Wno-yacc -ozconf.tab.c -t -l zconf.y
gcc -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -DKBUILD_NO_NLS -c -o zconf.tab.o zconf.tab.c
gcc conf.o zconf.tab.o -o conf
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/15953
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tony Ambardar [Mon, 15 Jul 2024 05:21:52 +0000 (22:21 -0700)]
libbpf: Update to v1.4.5
Update to the latest upstream release to include recent improvements and
bugfixes.
Link: https://github.com/libbpf/libbpf/releases/tag/v1.4.5
Link: https://github.com/libbpf/libbpf/releases/tag/v1.4.4
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
John Audia [Thu, 18 Jul 2024 20:15:36 +0000 (16:15 -0400)]
kernel: bump 6.6 to 6.6.41
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.41
Manually rebased:
lantiq/patches-6.6/0028-NET-lantiq-various-etop-fixes.patch
All other patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
Zxl hhyccc [Thu, 18 Jul 2024 16:45:20 +0000 (00:45 +0800)]
kernel: bump 6.1 to 6.1.100
https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.100
All patches automatically rebased.
Build system: bcm53xx ath79
Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Rafał Miłecki [Fri, 12 Jul 2024 09:36:47 +0000 (11:36 +0200)]
base-files: upgrade: nand: use "cmd" argument for extracting command
NAND code uses either "cat" or "zcat" for getting firmware image
content. Code was full of duplicated ${gz}cat calls. Use "cmd" variable
that is determined by a caller and passed to lower level functions. This
avoids code duplication and allows adding support for more formats.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 12 Jul 2024 09:36:46 +0000 (11:36 +0200)]
base-files: upgrade: nand: document nand_do_upgrade()
Describe what firmware files are supported.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Tianling Shen [Tue, 2 Apr 2024 12:26:45 +0000 (20:26 +0800)]
mediatek: switch to fitblk for cmcc rax3000m
Use the new fitblk driver.
Tested-by: Yangyu Chen <cyy@cyyself.name>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Tue, 2 Apr 2024 12:26:45 +0000 (20:26 +0800)]
mediatek: convert eeprom/macaddr to nvmem format for cmcc rax3000m
Switch to new nvmem binding.
Also fixes a issue that the MAC address assigned to lan/wan was
reversed on eMMC boards.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Martin Schiller [Thu, 18 Jul 2024 11:53:37 +0000 (13:53 +0200)]
target.mk: init default configs if they are missing in the .config
The config options that are enabled by default and where other default
packages depends on should not only be set if there is no .config file,
but also if the .config exists but the config option (e.g.
CONFIG_SECCOMP) is missing in the file.
This is relevant, for example, if you are working with .config templates
and then want to complete the configuration using make defconfig.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 17 Jul 2024 11:00:38 +0000 (13:00 +0200)]
target.mk: further improve handling of default enabled SECCOMP
The fix in commit
847fad476f3d ("target.mk: improve handling of default
enabled SECCOMP") unfortunately does not work for targets where the ARCH
variable is set in ./$(SUBTARGET)/target.mk.
To get this working, the ./$(SUBTARGET)/target.mk must be included
before the check.
Fixes: 847fad476f3d ("target.mk: improve handling of default enabled SECCOMP")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Daniel Golle [Thu, 18 Jul 2024 10:56:13 +0000 (11:56 +0100)]
mediatek: fix platform_copy_config()
Also use env variables exported by export_fitblk_rootdev() in
platform_copy_config().
Fixes: 4448d6325f ("mediatek: make use of common uImage.FIT upgrade functions")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 17 Jul 2024 15:25:59 +0000 (16:25 +0100)]
base-files: remove fitblk_get_bootdev() from /lib/upgrade/common.sh
The function was moved to /lib/upgrade/fit.sh which is part of the fitblk
package. Remove it from /lib/upgrade/common.sh to safe space on boards
not using unified uImage.FIT images.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 17 Jul 2024 15:25:05 +0000 (16:25 +0100)]
uboot-envtools: use /lib/upgrade/fit.sh
Use export_fitblk_bootdev() in /lib/upgrade/fit.sh instead of now
deprecated fitblk_get_bootdev() function. Include /lib/upgrade/fit.sh
instead of /lib/upgrade/common.sh to allow removing the function there.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 17 Jul 2024 15:24:03 +0000 (16:24 +0100)]
mediatek: make use of common uImage.FIT upgrade functions
Use newly introduced fit_do_upgrade() function in /lib/upgrade/platform.sh.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Wed, 17 Jul 2024 15:22:10 +0000 (16:22 +0100)]
fitblk: move shell functions to common file
Move shell functions used for sysupgrade into /lib/upgrade/fit.sh.
Introduce improved fitblk boot device detection function which
works also in case ubiblock devices have not yet been created or
even UBI itself not yet being attached.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Jan Hoffmann [Sat, 13 Jul 2024 12:49:09 +0000 (14:49 +0200)]
omap: re-enable target
The target was marked source-only due do the broken Ethernet port on
some devices. With that fixed, it can be enabled again.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Jan Hoffmann [Sat, 13 Jul 2024 12:49:08 +0000 (14:49 +0200)]
omap: switch back to old cpsw ethernet driver
The new cpsw-switch driver reserves VLAN 1 for internal use, which
conflicts with the default network configuration of OpenWrt.
Switch back to the older cpsw driver to make the network connection on
the affected devices (BeagleBone Black and AM335x EVM) usable again.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Zxl hhyccc [Tue, 16 Jul 2024 06:14:08 +0000 (14:14 +0800)]
kernel: bump 6.1 to 6.1.99
https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.99
All patches automatically rebased.
Build system: Kirkwood bcm53xx
Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Christian Marangi [Tue, 16 Jul 2024 17:00:29 +0000 (19:00 +0200)]
imagebuilder: remove initramfs image files
Initramfs images are not supported by imagebuilder. With recent changes
to support Per Device Rootfs, we now generate an image and a vmlinux for
each Rootfs and these additional files are all shipped in the
imagebuilder tar.
Drop these new file and any vmlinux-initramfs as they are not used and
increase the final size of the imagebuilder archive.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
John Audia [Mon, 15 Jul 2024 19:37:46 +0000 (15:37 -0400)]
kernel: bump 6.6 to 6.6.40
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.40
All patches (one in this case) automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000
Run-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/15956
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 14 Jul 2024 23:06:38 +0000 (01:06 +0200)]
wolfssl: Update to version 5.7.2
This fixes multiple security problems:
* [Medium] CVE-2024-1544
Potential ECDSA nonce side channel attack in versions of wolfSSL before 5.6.6 with wc_ecc_sign_hash calls.
* [Medium] CVE-2024-5288
A private key blinding operation, enabled by defining the macro WOLFSSL_BLIND_PRIVATE_KEY, was added to mitigate a potential row hammer attack on ECC operations.
* [Low] When parsing a provided maliciously crafted certificate directly using wolfSSL API, outside of a TLS connection, a certificate with an excessively large number of extensions could lead to a potential DoS.
* [Low] CVE-2024-5991
In the function MatchDomainName(), input param str is treated as a NULL terminated string despite being user provided and unchecked.
* [Medium] CVE-2024-5814
A malicious TLS1.2 server can force a TLS1.3 client with downgrade capability to use a ciphersuite that it did not agree to and achieve a successful connection.
* [Medium] OCSP stapling version 2 response verification bypass issue when a crafted response of length 0 is received.
* [Medium] OCSP stapling version 2 revocation bypass with a retry of a TLS connection attempt.
Unset DISABLE_NLS to prevent setting the unsupported configuration
option --disable-nls which breaks the build now.
Link: https://github.com/openwrt/openwrt/pull/15948
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Chad Monroe [Mon, 15 Jul 2024 17:37:55 +0000 (10:37 -0700)]
mediatek: filogic: disable eMMC HS400 mode for Mount Stuart series
The eMMC chip used in a small batch of these devices has issues operating
in HS400 mode. Reducing to HS200 mode works around the problem and does
not cause any noticeable performance penalties as smaller chips are not fast
enough to saturate the bus. Root cause analysis is pending.
Signed-off-by: Chad Monroe <chad@monroe.io>
Felix Fietkau [Mon, 15 Jul 2024 09:55:20 +0000 (11:55 +0200)]
uboot-mediatek: fix build error on mt7988-rfb
Remove an unnecessary config option that was breaking the build
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Zxl hhyccc [Fri, 12 Jul 2024 17:37:10 +0000 (01:37 +0800)]
kernel: bump 6.1 to 6.1.98
https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.98
All patches automatically rebased.
Build system: bcm53xx ath79
Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15935
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
John Audia [Thu, 11 Jul 2024 20:00:56 +0000 (16:00 -0400)]
kernel: bump 6.6 to 6.6.39
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.39
Manually rebased:
generic/backport-6.6/0080-v6.9-smp-Avoid-setup_max_cpus_namespace_collision_shadowing.patch
Removed upstreamed:
generic/backport-6.6/801-v6.11-gpio-mmio-do-not-calculate-bgpio_bits-via-ngpios.patch[1]
generic/backport-6.6/0081-v6.10-cpu-Fix-broken-cmdline-nosmp-and-maxcpus-0.patch[2]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.39&id=
dee87316b5f5f167a201491a774bbd6e10c8dd94
2. https://github.com/gregkh/linux/commit/
69787793e7f0673465c89714d1522fde978bbfa8
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://github.com/openwrt/openwrt/pull/15928
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Daniel Golle [Sun, 14 Jul 2024 18:44:26 +0000 (19:44 +0100)]
fstools: update to git HEAD
408c2cc libfstools: skip JFFS2 padding when BLOCKSIZE was given
013050f fstools: remove redundant F2FS_MINSIZE definition
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 14 Jul 2024 15:28:42 +0000 (16:28 +0100)]
mediatek: add BPi-R3 mini to platform_check_image()
Add entry for the BananaPi R3 mini to the platform_check_image()
function where it has been missing.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 9 Jul 2024 16:01:41 +0000 (17:01 +0100)]
uboot-mediatek: remove hard-coded UBI volume numbers
There is no point in hard-coding the UBI volume numbers as we are
dynamically looking up the volume by volume name in all cases by now.
Remove this relict as it causes problems without being useful for
anything.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Shiji Yang [Fri, 5 Jul 2024 05:52:06 +0000 (13:52 +0800)]
uboot-mediatek: refresh device defconfig files
It seems that most of them are manually modified. However, we can
use `make savedefconfig` to generate a clean defconfig file.
Refreshed by:
```
Boards=(
mt7623n_bpir2_defconfig \
mt7623a_unielec_u7623_02_defconfig \
mt7622_bananapi_bpi-r64-sdmmc_defconfig \
mt7622_bananapi_bpi-r64-emmc_defconfig \
mt7622_bananapi_bpi-r64-snand_defconfig \
mt7622_linksys_e8450_defconfig \
mt7622_ubnt_unifi-6-lr-v1_defconfig \
mt7622_ubnt_unifi-6-lr-v2_defconfig \
mt7622_ubnt_unifi-6-lr-v3_defconfig \
ravpower-rp-wd009-ram_defconfig \
mt7621_zbtlink_zbt-wg3526-16m_defconfig \
mt7986_netcore_n60_defconfig \
mt7986a_bpi-r3-emmc_defconfig \
mt7986a_bpi-r3-nor_defconfig \
mt7986a_bpi-r3-sd_defconfig \
mt7986a_bpi-r3-snand_defconfig \
mt7986_xiaomi_redmi-ax6000_defconfig \
mt7986_tplink_tl-xdr4288_defconfig \
mt7986_tplink_tl-xdr6086_defconfig \
mt7986_tplink_tl-xdr6088_defconfig \
mt7981_qihoo-360t7_defconfig \
mt7981_xiaomi_mi-router-wr30u_defconfig \
mt7981_h3c_magic-nx30-pro_defconfig \
mt7986a_glinet_gl-mt6000_defconfig \
mt7981_cmcc_rax3000m-emmc_defconfig \
mt7981_cmcc_rax3000m-nand_defconfig \
mt7981_jcg_q30-pro_defconfig \
mt7986_zyxel_ex5601-t0_defconfig \
mt7981_xiaomi_mi-router-ax3000t_defconfig \
mt7986a_jdcloud_re-cp-03_defconfig \
mt7986a_bpi-r3-mini-emmc_defconfig \
mt7986a_bpi-r3-mini-snand_defconfig \
mt7981_nokia_ea0326gmp_defconfig \
mt7988a_bananapi_bpi-r4-emmc_defconfig \
mt7988a_bananapi_bpi-r4-sdmmc_defconfig \
mt7988a_bananapi_bpi-r4-snand_defconfig \
mt7988a_bananapi_bpi-r4-poe-emmc_defconfig \
mt7988a_bananapi_bpi-r4-poe-sdmmc_defconfig \
mt7988a_bananapi_bpi-r4-poe-snand_defconfig \
mt7622_xiaomi_redmi-router-ax6s-ubi-loader_defconfig \
mt7981_openwrt-one-nor_defconfig \
mt7981_openwrt-one-spi-nand_defconfig \
)
for Board in ${Boards[@]}
do
echo "Refresh board ${Board}"
make ${Board}
make savedefconfig
cat ./defconfig > ./configs/${Board}
done
```
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Shiji Yang [Fri, 5 Jul 2024 05:52:06 +0000 (13:52 +0800)]
uboot-mediatek: update to U-Boot release v2024.07
1. Rename function _do_env_set() to env_do_env_set().
2. Replace kwbimage hack with UBOOT_CUSTOMIZE_CONFIG:
"--disable TOOLS_KWBIMAGE" and "--disable TOOLS_LIBCRYPTO".
3. Disable CONFIG_CMD_BOOTEFI_BOOTMGR for all supported devices
because the newly added UEFI bootmenu entries doesn't work.
4. Enable CONFIG_VERSION_VARIABLE for the OpenWrt One.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Co-authored-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Sat, 13 Jul 2024 13:31:11 +0000 (15:31 +0200)]
mt76: update to Git HEAD (2024-07-13)
564cd93961fc mt76: sync with upstream changes
3b47d9df427c wifi: mt76: mt7915: fix oops on non-dbdc mt7986
Signed-off-by: Felix Fietkau <nbd@nbd.name>
谢致邦 (XIE Zhibang) [Mon, 17 Jun 2024 16:07:53 +0000 (16:07 +0000)]
netfilter: kmod-nft-netdev: add egress support
The netdev egress hook was added in Linux kernel 5.16.
Link: https://patchwork.ozlabs.org/project/openwrt/patch/tencent_EB1DF62723D08576A747D0DAE16FFB99B505@qq.com/
Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com>
Shiji Yang [Sat, 6 Jul 2024 10:27:19 +0000 (18:27 +0800)]
ramips: fix image recipe for ASUS RT-N56U
The OpenWrt image metadata includes checksum validation. Therefore,
it must be generated at the end.
Fixes: https://github.com/openwrt/openwrt/issues/9045
Fixes: https://github.com/openwrt/openwrt/issues/13674
Link: https://patchwork.ozlabs.org/project/openwrt/patch/TYCP286MB08952FAACDFA234C5E052131BCD82@TYCP286MB0895.JPNP286.PROD.OUTLOOK.COM/
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Tomasz Maciej Nowak [Thu, 11 Jul 2024 19:38:22 +0000 (21:38 +0200)]
tegra: promote kernel 6.6 as default
It has been stable so far. As result of this change drop 5.15 files.
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20240711194120.11563-1-tmn505@terefe.re/
Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Shiji Yang [Sat, 13 Jul 2024 08:50:59 +0000 (16:50 +0800)]
rtl8812au-ct: fix build with mac80211 6.9.9 backport
The change_beacon() API has been updated since the 6.7 kernel. Ref:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.9.9&id=
66f85d57b7109baf8a7d5ee04049ac9412611d35
Fix build error:
../rtl8812au-ct-2022.10.26~
9b2b203a/os_dep/linux/ioctl_cfg80211.c:5984:26: error: initialization of 'int (*)(struct wiphy *, struct net_device *, struct cfg80211_ap_update *)' from incompatible pointer type 'int (*)(struct wiphy *, struct net_device *, struct cfg80211_beacon_data *)' [-Werror=incompatible-pointer-types]
5984 | .change_beacon = cfg80211_rtw_change_beacon,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
../rtl8812au-ct-2022.10.26~
9b2b203a/os_dep/linux/ioctl_cfg80211.c:5984:26: note: (near initialization for 'rtw_cfg80211_ops.change_beacon')
Link: https://patchwork.ozlabs.org/project/openwrt/patch/TYCP286MB0895A26BA1C0517F2CBE71F0BCA72@TYCP286MB0895.JPNP286.PROD.OUTLOOK.COM/
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Shiji Yang [Sat, 13 Jul 2024 03:47:21 +0000 (11:47 +0800)]
mac80211: rt2x00: remove upstreamed patch
This BBP register fix patch has already been upstreamed. Ref:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.9.9&id=
50da74e1e8b682853d1e07fc8bbe3a0774ae5e09
Fixes: 1bfcc1ea8a78 ("mac80211: update to version 6.9.9")
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Felix Fietkau [Fri, 12 Jul 2024 16:26:56 +0000 (18:26 +0200)]
ath10k-ct: fix mac80211 backport patch to account for the bump to 6.7
Fixes build error
Fixes: 1bfcc1ea8a78 ("mac80211: update to version 6.9.9")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 11 Jul 2024 13:03:13 +0000 (15:03 +0200)]
ucode: update to Git HEAD (2024-07-11)
73644a036f5a nl80211: move access to tb array out of uc_nl_convert_attr and below
6e3cf83a77a7 nl80211: add support for multi-attribute arrays
6ff24d5488a9 nl80211: update nl80211.h to latest wireless-next
abc2aef28641 nl80211: add wiphy multi-radio support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 19 Jun 2024 11:51:47 +0000 (13:51 +0200)]
mac80211: update to version 6.9.9
Brings lots of driver updates and API changes needed for mt76 updates.
Disable iwlwifi and ath11k on 5.15, since backport is too difficult,
and the only remaining targets won't need those drivers.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 12 Jul 2024 13:04:12 +0000 (15:04 +0200)]
kernel: add mhi bus firmware download backport to 6.1
Required by a newer mac80211 backport
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Robert Marko [Thu, 11 Jul 2024 13:16:27 +0000 (15:16 +0200)]
mvebu: rb5009: wire SFP led by default
There is no reason not to wire up the default netdev trigger for the SFP
LED since we have a separate SFP interface visible.
Link: https://github.com/openwrt/openwrt/pull/15927
Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Thu, 11 Jul 2024 13:14:47 +0000 (15:14 +0200)]
mvebu: rb5009: convert LEDs to color/function
Since we are trying to get rid of using labels, lets convert RB5009 to the
function/color combo.
Link: https://github.com/openwrt/openwrt/pull/15927
Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Thu, 11 Jul 2024 13:02:28 +0000 (15:02 +0200)]
mvebu: rb5009: fix QCA8081 LED polarity
Currently, QCA8081 LED is never configured and the default configuration
has the LED polarity inverted so it will be lit when there is nothing
connected to the PHY.
So lets define the LED as active-low and configure the trigger via 01_leds.
Fixes: 85d9fd6f0ec7 ("mvebu: add support for RB5009UG+S+IN")
Link: https://github.com/openwrt/openwrt/pull/15927
Signed-off-by: Robert Marko <robimarko@gmail.com>
FUKAUMI Naoki [Thu, 11 Jul 2024 05:01:39 +0000 (14:01 +0900)]
rockchip: stop "heartbeat" LED for Radxa CM3I(E25)
stop "heartbeat" which happens before OpenWrt controls LED. instead,
just turn LED on.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://github.com/openwrt/openwrt/pull/15913
Signed-off-by: Robert Marko <robimarko@gmail.com>
Daniel Golle [Fri, 12 Jul 2024 01:38:53 +0000 (02:38 +0100)]
ramips: mt7621: reduce MMC clock to 48 MHz
The switch to the upstream mmc-mtk driver caused problems with MT7621
because of unstable too high clock frequency:
[ 49.643291] mmc0: error -88 whilst initialising SD card
[ 49.890047] mmc0: error -88 whilst initialising SD card
[ 50.142414] mmc0: error -88 whilst initialising SD card
[ 50.419218] mmc0: error -88 whilst initialising SD card
...
Fix this by reducing the clock speed to 48 MHz instead of 50 MHz, which
is also the value used in upstream Linux mt7621.dtsi.
With that change applied SD cards work as expected on MT7621 devices
also with the new driver.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Shiji Yang [Tue, 9 Jul 2024 17:26:52 +0000 (01:26 +0800)]
ramips: improve support for HiWiFi HC5861 SDHC
1. Override max clock frequency to a stable value 24 MHz.
2. Use voltage regulator to control the power supply.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Shiji Yang [Tue, 9 Jul 2024 16:16:36 +0000 (00:16 +0800)]
ramips: switch default SDHC driver to kmod-mmc-mtk
Now that the SDHC of MT762{0,1,8} has been supported upstream, it's
time to switch the default driver to the upstream one. We will still
keep the old driver for users to choose from.
Tested on HiWiFi HC5861 (MT7620A) and HiWiFi HC5661A (MT7628N).
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Shiji Yang [Tue, 9 Jul 2024 16:16:36 +0000 (00:16 +0800)]
ramips: make SoC dtsi compatible with upstream mmc-mtk driver
Add all essential MTK SDHC properties to support the new mmc-mtk
driver. Since this driver relies on power regulators, we also
need to enable this feature for MT7620, just like MT762{1,8}.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Co-authored-by: John Thomson <git@johnthomson.fastmail.com.au>
Shiji Yang [Tue, 9 Jul 2024 16:16:36 +0000 (00:16 +0800)]
ramips: modules: add Mediatek MMC driver package
This is the upstream implementation of the MTK SD/SDIO/MMC card
reader driver. It is an alternative solution for the downstream
driver package "kmod-sdhci-mt7620".
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Co-authored-by: John Thomson <git@johnthomson.fastmail.com.au>
Shiji Yang [Tue, 9 Jul 2024 16:16:36 +0000 (00:16 +0800)]
ramips: mtk-sd: initialize pad delay and drive strength
Port vendor register init values to upstream MTK SHDC driver.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Shiji Yang [Tue, 9 Jul 2024 16:16:36 +0000 (00:16 +0800)]
ramips: mtk-mmc: use "cd-inverted" to set CD line polarity
"cd-inverted" is an upstream documented property used to indicate
the CD line is actived high. We will introduce a new upstream SDHC
driver, and this change will make them compatible with each other.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Felix Fietkau [Wed, 3 Jul 2024 15:45:33 +0000 (17:45 +0200)]
mac80211: clear vif private data in order to fix accidental reuse
Fixes potential issues when bringing an interface down and then up again
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Kristian Skramstad [Sat, 6 Jul 2024 07:12:58 +0000 (09:12 +0200)]
firmware: ipq-wifi: update to version 2024-07-04
Added:
[+] qcn9074: add Cambium Networks XE3-4 BDF
[+] ipq60xx: add Cambium Networks XE3-4 BDF
Signed-off-by: Kristian Skramstad <kristian+github@83.no>
Link: https://github.com/openwrt/openwrt/pull/15884
Signed-off-by: Robert Marko <robimarko@gmail.com>
Hauke Mehrtens [Wed, 10 Jul 2024 21:52:41 +0000 (23:52 +0200)]
wireless-regdb: Update to version 2024.07.04
Changes:
2a768c4 wireless-regdb: Update regulatory rules for Mongolia (MN) on 6GHz
04875d9 wireless-regdb: Update regulatory rules for Saudi Arabia (SA) on 6GHz
b7bced8 wireless-regdb: Update regulatory rules for South Africa (ZA) on 6GHz
7bc8615 wireless-regdb: Update regulatory info for Thailand (TH) on 6GHz
f901fa9 wireless-regdb: Update regulatory info for Malaysia (MY) for 2022
d72d288 wireless-regdb: Update regulatory info for Morocco (MA) on 6GHz
414face wireless-regdb: Update regulatory info for Chile (CL) on 6GHz
1156a08 wireless-regdb: Update regulatory info for Mexico (MX) on 6GHz
cc6cf7c wireless-regdb: Update regulatory info for Iceland (IS) on 6GHz
ce03cc0 wireless-regdb: Update regulatory info for Mauritius(MU) on 6GHz
7e37778 wireless-regdb: Update regulatory info for Argentina (AR) on 6GHz
56f3a43 wireless-regdb: Update regulatory info for United Arab Emirates (AE) on 6GHz
3cb8b91 wireless-regdb: Update regulatory info for Colombia (CO) on 6GHz
3682ce5 wireless-regdb: Update regulatory info for Costa Rica (CR) for 2021
dd4ffe7 wireless-regdb: Update regulatory info for Dominican Republic (DO) on 6GHz
f8ef7da wireless-regdb: Update regulatory info for Liechtenstein (LI) on 6GHz
a9ecabe wireless-regdb: Update regulatory info for Jordan (JO) for 2022
5a9fdad wireless-regdb: Update regulatory info for Kenya (KE) for 2022
19326c3 wireless-regdb: Update regulatory info for Macao (MO) for 2024
4838054 wireless-regdb: update regulatory database based on preceding changes
Link: https://github.com/openwrt/openwrt/pull/15921
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
John Audia [Tue, 9 Jul 2024 20:20:30 +0000 (16:20 -0400)]
kernel: bump 6.6 to 6.6.38
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.38
Removed target/linux/generic/hack-6.6/900-fix-build-to-handle-return-value.patch
which was introduced as a hacky attempt to fix an upstream issue related to 6.6.37.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/15879
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
John Audia [Fri, 5 Jul 2024 10:04:18 +0000 (06:04 -0400)]
kernel: bump 6.6 to 6.6.37
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.37
Added:
generic/hack-6.6/900-fix-build-to-handle-return-value.patch[1]
Manually rebased:
generic/pending-6.6/834-ledtrig-libata.patch
Removed upstreamed:
bcm27xx/patches-6.6/950-0398-drm-panel-panel-ilitek9881c-Use-cansleep-methods.patch[2]
All other patches automatically rebased.
1. Patch suggested by @DragonBluep to circumvent upstream breakage of kernel 6.6.37 compilation. See comments in https://github.com/openwrt/openwrt/pull/15879 for additional discussion.
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.37&id=
1618f7a875ffd916596392fd29880c0429b8af60
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/15879
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
novenary enneagon [Wed, 10 Jul 2024 09:16:03 +0000 (12:16 +0300)]
ncurses: add foot terminfo
Add terminfo file for the terminal emulator foot.
https://codeberg.org/dnkl/foot
Signed-off-by: novenary enneagon <novenary@kwak.zip>
Link: https://github.com/openwrt/openwrt/pull/15915
Signed-off-by: Robert Marko <robimarko@gmail.com>
Shiji Yang [Sun, 7 Jul 2024 16:05:14 +0000 (00:05 +0800)]
ramips: limit max spi clock frequency to 50 MHz
In the past few years, we have received several reports about SPI
Flash not working properly. This is caused by excessively fast
clock frequency. It's really annoying to fix them one by one. Let's
reduce these aggressive frequencies to 50 MHz. This is a safe and
suggested value in the vendor SDK.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Tianling Shen [Thu, 4 Jul 2024 13:09:03 +0000 (21:09 +0800)]
rockchip: fix baudrate for Radxa E25
According to the documentation[1], the serial baudrate of E25 is
115.2 Kbps, and setting it to 1.5 Mbps will cause onboard CH340B
USB-UART chip unstable.
Since mainline TPL is yet available, download patched TPL binary
from Radxa.
1. https://wiki.radxa.com/Rock3/CM/CM3I/E25/getting_started
Fixes: https://github.com/openwrt/openwrt/issues/15814
Fixes: f7c732bf9ed9 ("rockchip: add Radxa E25 board support")
Tested-by: FUKAUMI Naoki <naoki@radxa.com>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/15870
Signed-off-by: Robert Marko <robimarko@gmail.com>
Tan Zien [Sat, 6 Jul 2024 17:23:25 +0000 (01:23 +0800)]
libiwinfo: update to Git HEAD (2024-07-06)
2158201 devices: add device id for Atheros AR9590
Signed-off-by: Tan Zien <nabsdh9@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15889
Signed-off-by: Robert Marko <robimarko@gmail.com>
Rosen Penev [Tue, 9 Jul 2024 21:06:57 +0000 (14:06 -0700)]
readline: override termlib for host
For some reason, it's not working right locally. Override as is done
with the target build.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15916
Signed-off-by: Robert Marko <robimarko@gmail.com>
Christian Marangi [Tue, 9 Jul 2024 02:27:11 +0000 (04:27 +0200)]
kernel: fix broken initramfs images for Separate cpio
Commit
0137fbd74bff ("kernel: skip rebuilding kernel with
ROOTFS_INITRAMFS_SEPARATE") had a logic error error and didn't account
that the generic initramfs is still needed to be built to enable support
for the cpio compression and other config specific to initramfs. With
that commit we completely skip rebuilding the kernel with those new
options.
To better handle this, skip kernel build ONLY when we are handling Per
Device Rootfs, permitting the first generic build to be actually called
with the new options.
Fixes: 0137fbd74bff ("kernel: skip rebuilding kernel with ROOTFS_INITRAMFS_SEPARATE")
Link: https://github.com/openwrt/openwrt/pull/15912
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Robert Marko [Sun, 11 Feb 2024 17:57:52 +0000 (18:57 +0100)]
qualcommax: ipq807x: add Asus RT-AX89X BX revision
This commit adds support for Asus RT-AX89X BX revision.
WARNING: Only the BX revision boards (So B1, B2 etc) are supported because
AX revision boards use IPQ8074 v1 SoC which is unsupported.
Specifications:
---------------
* CPU: Qualcomm IPQ8074A Quad core Cortex-A53 @ 2.2GHz
* RAM: 1024MB
* Storage: 256MB SLC NAND (Macronix MX30UF2G18AC)
* Ethernet:
* 5x 1G RJ45 ports via QCA8337 switch
* 3x 1G RJ45 ports via internal switch (QCA8075 PHY)
* 1x 10G RJ45 via internal switch (AQR113C PHY)
* 1x 10G SFP+ slot via internal switch
* WLAN:
* 2.4GHz 4x4
* 5GHz 8x8
* 8 external antennas
* USB: 2x USB 3.0 Type-A
* Buttons:
* Power switch
* WPS
* Reset
* Wireless ON/OFF
* LED ON/OFF
LED-s:
* Power
* Wi-Fi
* WAN
* 10G
* SFP+
Power:
* 19.5V via DC jack
Installation instructions:
--------------------------
1. Flash temporary OpenWrt initramfs:
* Flash openwrt-qualcommax-ipq807x-asus_rt-ax89x-initramfs-factory.trx
via the stock firmware.
Administration -> Firmware Upgrade -> Manual Firmware update (Upload)
After flashing the device will reboot with OpenWrt initramfs and it can
be accesed via any of the LAN ports via SSH with the usual OpenWrt
default credentials.
2. Sysupgrade from OpenWrt initramfs:
* Copy openwrt-qualcommax-ipq807x-asus_rt-ax89x-squashfs-sysupgrade.bin to
/tmp/openwrt-qualcommax-ipq807x-asus_rt-ax89x-squashfs-sysupgrade.bin of
the running initramfs image.
* Simply sysupgrade -n /tmp/openwrt-qualcommax-ipq807x-asus_rt-ax89x-squashfs-sysupgrade.bin
After flashing the device will reboot with OpenWrt initramfs and it can
be accesed via any of the LAN ports via SSH with the usual OpenWrt
default credentials.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Sun, 30 Jun 2024 10:51:04 +0000 (12:51 +0200)]
tools: firmware-utils: update to Git HEAD (2024-06-30)
0cfd1043e6c4 zytrx: add ZyXEL LTE7490-M904
3d09357fc7b5 asusuimage: new tool for creating TRX-images compatible with AsusWRT
f35781fcd2c3 asusuimage: fix compile error with old GCC release
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Wed, 26 Jun 2024 16:52:29 +0000 (18:52 +0200)]
image: add recipe for legacy multiple images
Asus RT-AX89X has modded U-Boot that boots FIT images fine when manually
using bootm command, however once the image is flashed and device boots via
the default bootcmd it only supports booting via legacy images.
More precisely, it requires the "multi" image format with:
1. kernel
2. ramdisk
3. DTB
So, lets add a recipe based on the existing uImage one.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Sun, 11 Feb 2024 17:56:54 +0000 (18:56 +0100)]
generic: add fix for AQR113 PMD Global Transmit Disable bit
PMD Global Transmit Disable bit should be cleared for normal operation.
This should be HW default, however I found that on Asus RT-AX89X that uses
AQR113C PHY and firmware 5.4 this bit is set by default.
With this bit set the AQR cannot achieve a link with its link-partner and
it took me multiple hours of digging through the vendor GPL source to find
this out, so lets always clear this bit during .config_init() to avoid a
situation like this in the future.
aqr107_wait_processor_intensive_op() is moved up because datasheet notes
that any changes to this bit are processor intensive.
This is a modified version of patch that got merged upstream as AQR113C
has a separate config_init() upstream.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Mon, 26 Jun 2023 10:09:16 +0000 (12:09 +0200)]
firmware: ipq-wifi: add Asus RT-AX89X BDF
Include the Asus RT-AX89X BDF.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Sat, 10 Feb 2024 19:40:37 +0000 (20:40 +0100)]
qualcommax: ipq807x: enable QCA83XX PHY driver
Asus RT-AX89X has an external QCA8337 switch that has built-in
internal ethernet PHY-s that are supported by the QCA83XX PHY driver so
lets enable it.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Sat, 10 Feb 2024 11:35:05 +0000 (12:35 +0100)]
qualcommax: ipq807x: enable qca8k driver
Asus RT-AX89X has an Qualcomm QCA8337 switch used to provide additional
1G copper ports, so lets enable qca8k in order to utilize DSA instead of
relying on SSDK for it.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Sat, 10 Feb 2024 16:19:54 +0000 (17:19 +0100)]
qualcommax: ipq807x: enable GPIO bitbanged MDIO
Asus RT-AX89X is using GPIO bitbanged MDIO on newer HW revisions, so lets
enable it in kernel config.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Thu, 29 Jun 2023 18:18:10 +0000 (20:18 +0200)]
qualcommax: ipq8074-ess: move switch to ess-instance node
It seems that newer SSDK is now expecting the switch node to be a subnode
of "ess-instance" node which also contains "num_devices" as the number of
switches as you can also have external switches connected.
Asus RT-AX89X is even more peculiar as its bootloader has a hardcoded path
to enable if on that revision there is an AQR113 connected to port 6 of the
switch.
So, lets move the current switch node under ess-instance as otherwise it
seems that SSDK is having some issues parsing the UNIPHY mode properly as
I am getting the following:
[ 6.981404] _adpt_hppe_instance1_mode_get[3275]:ERROR:port 6 doesn't support port_interface_mode 9
Which should not happen as that port has the mode set to 13.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Sun, 25 Jun 2023 09:29:24 +0000 (11:29 +0200)]
kernel: qca-ssdk: set OF node for the SFP PHY
Currently, SSDK is creating a fake SFP PHY which has no OF node populated,
thus making it impossible to pass it to NSS-DP so port can actually work.
We eliminated QCA-s connecting of the PHY by manually creating a string
and then matching by name and instead only support passing the PHY as
phandle via phy-handle.
So, lets just use the switch port node to which the SFP is connected to
anyway and set it as the PHY device OF node so we can pass it to NSS-DP.
Link: https://github.com/openwrt/openwrt/pull/15840
Signed-off-by: Robert Marko <robimarko@gmail.com>
Christian Marangi [Tue, 9 Jul 2024 02:41:21 +0000 (04:41 +0200)]
image: exclude initramfs-images dependency with IB
Exclude initramfs-images dependency with IB as the target is not defined
in such context.
Fixes: cc6a0abcabf7 ("image: make images and artifacts dependent of initramfs")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Robert Marko [Mon, 8 Jul 2024 18:47:01 +0000 (20:47 +0200)]
tools: util-linux: disable NLS again
It seems that util-linux enables NLS support by default, this worked for
almost all platforms except for macOS on x86 where it seems that libintl is
preinstalled and thus it will link against gettext with libintl for NLS
support.
This would the later cause e2fsprogs and mtd-utils to fail:
Undefined symbols for architecture x86_64:
"_libintl_gettext", referenced from:
_random_tell_source in libuuid.a[13](libuuid_la-randutils.o)
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Issue appeared after I converted the tool to use --disable-all-programs and
accidentally dropped the --disable-nls from the args.
Fixes: 54115ec22d15 ("tools: util-linux: use --disable-all-programs")
Link: https://github.com/openwrt/openwrt/pull/15909
Signed-off-by: Robert Marko <robimarko@gmail.com>
Christian Marangi [Mon, 8 Jul 2024 11:21:13 +0000 (13:21 +0200)]
qualcommax: ipq807x: fix build error with no initramfs for RAX120v2
Exclude additional initramfs image for Netgear RAX120v2 when no
initramfs image are compiled to fix build error.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 8 Jul 2024 11:10:52 +0000 (13:10 +0200)]
image: make images and artifacts dependent of initramfs
There is currently a BIG bug in how the images dependency is handled and
recent Per Device Rootfs made this more clear and less statistical.
There is currently no dependency between images/artifacts build with
initramfs build. This cause whatever additional image that depends on an
initramfs image to fail as it might happen that image and initramfs
build are called at the same time and the additional image is called
before initramfs build has finished.
Each image-command assume the source image to be taken from the /bin
directory but that is only copied from the /tmp directory only at the
end of the process.
Artifacts currently depends on image with the use of the
BOARD-NAME-images Makefile target, but this is not the case for
initramfs that also define a -images Makefile target but that is not
accounted in images (that might depend on some initramfs images)
To actually fix this, introduce a new Makefile target, -initramfs-images
and make image and artifacts build to depend on this. Since initramfs
images are optional, this dependency is actived only when initramfs
image are built.
With this change we correctly enforce the build order:
- Initramfs Images (optional)
- Images
- Artifacts
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sun, 7 Jul 2024 17:28:35 +0000 (19:28 +0200)]
kernel: aldo fix CopyImage for Separate Initramfs
Also fix CopyImage for Separate Initramfs with Per Device Rootfs.
Fixes: 7bffb3f72bbf ("kernel: fix CopyImage function with Per Device Rootfs")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Robert Marko [Mon, 8 Jul 2024 07:46:02 +0000 (09:46 +0200)]
kernel: fix x86 compilation on macOS
Trying to compile x86 or x86_64 on macOS will fail with:
openwrt/build_dir/target-x86_64_musl/linux-x86_64/linux-6.6.36/tools/include/linux/rbtree.h:21:10: fatal error: 'linux/stddef.h' file not found
After some digging, it seems that we dropped the old 212-tools_portability
patch when 6.6 x86 support was added, then Felix added back some parts of
it in ("kernel: fix tools build breakage on macos with x86") but trying to
build x86 kernels will still fail.
So, lets add more of the required changes from the 212-tools_portability
patch so that x86 kernels build on macOS.
Fixes: 69b145188f1a ("generic: 6.6: Removal of tools_portability.patch already included in kernel 6.6")
Link: https://github.com/openwrt/openwrt/pull/15904
Signed-off-by: Robert Marko <robimarko@gmail.com>
Rosen Penev [Thu, 4 Jul 2024 19:12:33 +0000 (12:12 -0700)]
readline: fix pkgconfig usage
ncurses is built with wide support enabled, which enables libncursesw.
The problem is, the ncurses build system only supplies ncursesw or
ncurses.pc but not both. The other problem is, the readline build tests
for libncurses before the w variant, making its pc file unusable as
there is no ncurses.pc file to satisfy the Required: ncurses section.
Just override the library.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15864
Signed-off-by: Robert Marko <robimarko@gmail.com>
Rosen Penev [Thu, 4 Jul 2024 00:53:36 +0000 (17:53 -0700)]
ncurses: enable pc files in the host build
Needed for things such as readline that depend on ncurses.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15864
Signed-off-by: Robert Marko <robimarko@gmail.com>
Michael Pratt [Thu, 20 Jun 2024 05:28:00 +0000 (01:28 -0400)]
tools/elfutils: simplify and cleanup Makefile
After changes to default host build recipes
and default variable definitions,
several custom definitions can be removed,
and the gnulib recipes replaced
with hooks to common recipes.
Also remove leftover PKG_INSTALL
which has no effect for host builds.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15853
Signed-off-by: Robert Marko <robimarko@gmail.com>
Michael Pratt [Thu, 20 Jun 2024 05:10:21 +0000 (01:10 -0400)]
build: let HOST_CXXFLAGS default to HOST_CFLAGS
Usage of g++ should mimic the usage of gcc,
otherwise, part of a binary or library may have
optimizations and part of it may not,
unbeknownst to the users or developers working on a build.
This can lead to some features like, for example, FORTIFY_SOURCE,
to have less of an effect or even cause a build error on some hosts.
Therefore, let HOST_CXXFLAGS default to HOST_CFLAGS.
Fixes: 87d489f67 ("build: add HOST_CXXFLAGS for host build")
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15853
Signed-off-by: Robert Marko <robimarko@gmail.com>
Michael Pratt [Thu, 20 Jun 2024 04:55:58 +0000 (00:55 -0400)]
build: add default host build recipes for gnulib
Add generic recipes for incorporating gnulib into a build
for simplification and readability of the individual build Makefile.
Recipes for configuring and installing are purposefully missing
since "configuring" gnulib is done with standard autoreconf
and gnulib is not a final build target meant for installing.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15853
Signed-off-by: Robert Marko <robimarko@gmail.com>
Michael Pratt [Thu, 20 Jun 2024 04:23:39 +0000 (00:23 -0400)]
build: add support for PKG_SUBDIRS variable
Add support for overriding the SUBDIRS variable while invoking Make
by defining it after Make in the command line.
This is useful for builds that have previously patched out
the building of certain subdirectories in projects
that use recursive and independent Makefiles,
for example, to block the building of docs or test suites.
The wildcard function is used in the case of there being
subdirectories within any of the subdirectories,
for example, in the building of gengetopt,
in order to avoid the problem where Make will attempt
to execute a Makefile in a subdirectory that does not exist
within the subdirectory it is currently running from
because it really exists at the top-level, or one that exists
within one of the subdirectories when ran from top-level.
There are also cases where the Makefiles in the subdirectories
have the recursive building rules even though there are no more
subdirectories beyond that point, for example, with gnulib.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15853
Signed-off-by: Robert Marko <robimarko@gmail.com>
Michael Pratt [Wed, 15 May 2024 23:43:00 +0000 (19:43 -0400)]
tools/elfutils: remove header symlink between subdirectories
Replace the symlink in the build recipe for gnulib
with an extra include path flag in CPPFLAGS to the lib subdirectory
so that it is the last in the order of include paths,
and use a quote escape to make the flag a literal string
in order to use Make variables within it.
The original reason this is necessary is because the config.h header
provided by the project at the top-level build directory
calls another header eu-config.h
which is stored in the lib subdirectory instead of the top-level,
and building the gnulib library requires the config.h header.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15853
Signed-off-by: Robert Marko <robimarko@gmail.com>
Zxl hhyccc [Fri, 5 Jul 2024 18:29:52 +0000 (02:29 +0800)]
kernel: bump 6.1 to 6.1.97
https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.97
All patches automatically rebased.
Build system: Kirkwood bcm53xx
Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15883
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Daniel Golle [Sun, 7 Jul 2024 20:25:22 +0000 (21:25 +0100)]
procd: bump to git HEAD
f230c11 utils: use strlcpy when appropriate
a8cf548 jail: fix copy & paste error in parseOCIlinux()
1e411a5 utils: get_cmdline_val: add missing error check
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Christian Marangi [Sun, 7 Jul 2024 16:24:24 +0000 (18:24 +0200)]
kernel: fix CopyImage function with Per Device Rootfs
Some target define custom kernel images with KERNEL_INITRAMFS_NAME to
reference .elf variant of vmlinux.
With Per Device Rootfs, the expected format is
image.suffix.extension.ROOTFS_ID, while in CopyImage we are currently
generating images with image.suffix.ROOTFS_ID.extension making some
target failing.
Fix CopyImage function to correctly follow the expected pattern.
Fixes: 97fd059e7e6a ("image: respect TARGET_PER_DEVICE_ROOTFS for initramfs")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Qingfang Deng [Fri, 28 Jun 2024 09:01:00 +0000 (17:01 +0800)]
mediatek: fit: fix use of uninitialized variable
When building the kernel with -Wmaybe-uninitialized, GCC reports this
warning:
block/partitions/fit.c: In function 'parse_fit_partitions':
block/partitions/fit.c:164:3: warning: 'images' may be used uninitialized in this function [-Wmaybe-uninitialized]
164 | printk(KERN_ERR "FIT: Cannot find %s node: %d\n", FIT_CONFS_PATH, images);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It appears to be a copy paste error. It's the "config" variable that is
supposed to be printed.
Fixes: e6aac8d98f56 ("image: add support for building FIT image with filesystem")
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Chuanhong Guo [Fri, 28 Jun 2024 08:31:59 +0000 (16:31 +0800)]
kernel: mtdsplit: fix fit rootfs_data split
fit size should be rounded up instead of rounding down first and adding
a block. Otherwise the calculated size is one block more than needed
when fit size is exactly multiples of one block size.
Fixes: 9a863f803ec1 ("kernel: mtdsplit: add support for FIT image")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Martin Schiller [Wed, 26 Jun 2024 08:39:18 +0000 (10:39 +0200)]
lantiq: replace gswip patches with upstream version
Replace recently added patches with version accepted upstream.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/15811
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Martin Schiller [Wed, 26 Jun 2024 08:18:27 +0000 (10:18 +0200)]
lantiq: remove 6.1 kernel support
Since 6.6 is now default, drop 6.1 support.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/15811
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Martin Schiller [Wed, 26 Jun 2024 08:16:31 +0000 (10:16 +0200)]
lantiq: switch to kernel 6.6
Let's switch the lantiq target to use kernel 6.6 by default.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/15811
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Martin Schiller [Mon, 1 Jul 2024 09:41:36 +0000 (11:41 +0200)]
generic: 6.6: backport fix for broken cmdline "nosmp" and "maxcpus=0"
This backports the fix for the broken "nosmp" and "maxcpus=0" cmdline
params.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/15811
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Martin Schiller [Tue, 2 Jul 2024 07:34:37 +0000 (09:34 +0200)]
kernel: ltq-adsl: fix enum missmatch on linux 6.6
Convert DSL_XTUDir_t to DSL_AccessDir_t to get rid of enum-conversion
warning.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://github.com/openwrt/openwrt/pull/15811
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Daniel Golle [Fri, 28 Jun 2024 02:06:08 +0000 (03:06 +0100)]
ltq-tapi: fix build with Linux 6.6
Satisfy compiler expectations in a hell of typedef's and get rid of
system-wide workqueue flush. Results in warning-free compile of the TAPI
driver also with Linux 6.6.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://github.com/openwrt/openwrt/pull/15811
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
projects / openwrt / staging / stintel.git / log