Hauke Mehrtens [Wed, 16 Jul 2014 20:28:08 +0000 (20:28 +0000)]
mac80211: b43: fix PHY_G support.
I missed adding B43_PHY_G to .local-symbols, without this it will not
be added to autoconf.h
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41676
Felix Fietkau [Wed, 16 Jul 2014 18:57:23 +0000 (18:57 +0000)]
iwinfo: fix crash on parsing mtd (#15807)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41675
Felix Fietkau [Wed, 16 Jul 2014 18:35:25 +0000 (18:35 +0000)]
libubox: update to the latest version, fixes a jshn parsing error (#17128)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41674
Felix Fietkau [Wed, 16 Jul 2014 18:26:21 +0000 (18:26 +0000)]
ath9k: add a fix for tx pending frame accounting, fixes some tx hang issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41673
John Crispin [Wed, 16 Jul 2014 11:36:02 +0000 (11:36 +0000)]
lantiq: fix board_id/boardname for VGV7519
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
SVN-Revision: 41672
John Crispin [Wed, 16 Jul 2014 10:43:44 +0000 (10:43 +0000)]
lantiq: re-add 0041-lzma-fixup.patch to uboot
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41671
Felix Fietkau [Wed, 16 Jul 2014 06:55:19 +0000 (06:55 +0000)]
au1000: remove linux 3.6 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41670
Hauke Mehrtens [Tue, 15 Jul 2014 22:03:10 +0000 (22:03 +0000)]
au1000: update to kernel 3.10.44
This was tested by Bruno Randolf on au1000 (MTX-1)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41669
Hauke Mehrtens [Tue, 15 Jul 2014 21:58:03 +0000 (21:58 +0000)]
mac80211: b43: backport b43 patches from wireless testing
This brings b43 up to wireless-testing/master master-2014-07-15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41668
Hauke Mehrtens [Tue, 15 Jul 2014 21:57:13 +0000 (21:57 +0000)]
brcm47xx: remove kmod-bgmac from profile
bgmac will be compiled into the kernel since r41594.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41667
Hauke Mehrtens [Tue, 15 Jul 2014 21:54:38 +0000 (21:54 +0000)]
brcm47xx: fix LEDs on WRT54GL 1.1
Ticket: #17062
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 41666
Felix Fietkau [Tue, 15 Jul 2014 10:30:08 +0000 (10:30 +0000)]
hostapd: add a require_mode option in wifi-device sections to select the minimum hardware mode that the AP requires from clients
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41665
Hauke Mehrtens [Mon, 14 Jul 2014 22:16:19 +0000 (22:16 +0000)]
brcm47xx: fix special board handling for some devices
Some devices were renamed when converted from diag to in kernel board detection and it was not changed in netconfig. Devices not in the
kernel board detection are removed now.
This should close: #17111, #16968, #13202
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41663
Hauke Mehrtens [Mon, 14 Jul 2014 22:03:59 +0000 (22:03 +0000)]
brcm47xx: improve board detection for some devices
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41662
Gabor Juhos [Mon, 14 Jul 2014 21:30:30 +0000 (21:30 +0000)]
ar71xx: add profile and build image for the EnGenius EAP300 v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41661
Gabor Juhos [Mon, 14 Jul 2014 21:30:29 +0000 (21:30 +0000)]
package/uboot-envtools: add support for the EnGenius EAP300 v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41660
Gabor Juhos [Mon, 14 Jul 2014 21:30:28 +0000 (21:30 +0000)]
ar71xx: add user-space support for the EnGenius EAP300 v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41659
Gabor Juhos [Mon, 14 Jul 2014 21:30:26 +0000 (21:30 +0000)]
ar71xx: add kernel support for the EnGenius EAP300 v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41658
Luka Perkov [Mon, 14 Jul 2014 20:28:53 +0000 (20:28 +0000)]
toolchain/gcc: pass proper flags for arm hard float build
This fixes eglibc build failure. More information about the bug can be found on
the link below.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61796
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 41657
John Crispin [Mon, 14 Jul 2014 18:43:12 +0000 (18:43 +0000)]
kernel: fix kmod-igb dependencies
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41656
John Crispin [Mon, 14 Jul 2014 18:43:02 +0000 (18:43 +0000)]
lantiq: vgv7519 add missing wps label to dts
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
SVN-Revision: 41655
John Crispin [Mon, 14 Jul 2014 17:10:39 +0000 (17:10 +0000)]
ramips: basic support for Planex MZK-750DHP
some gpios are still missing.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41654
John Crispin [Mon, 14 Jul 2014 17:05:40 +0000 (17:05 +0000)]
ramips: squelch mdio debugging info on rt2880 ethernet
Use pr_debug rather than pr_info since it is only relevant
for debugging.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 41653
Gabor Juhos [Mon, 14 Jul 2014 16:03:37 +0000 (16:03 +0000)]
ar71xx: add profile and build image for the Tube2H board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41652
Gabor Juhos [Mon, 14 Jul 2014 16:03:36 +0000 (16:03 +0000)]
package/uboot-envtools: add support for the Tube2H board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41651
Gabor Juhos [Mon, 14 Jul 2014 16:03:35 +0000 (16:03 +0000)]
ar71xx: add user-space support for the Tube2H board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41650
Gabor Juhos [Mon, 14 Jul 2014 16:03:34 +0000 (16:03 +0000)]
ar71xx: add kernel support for the Tube2H board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41649
Imre Kaloz [Mon, 14 Jul 2014 15:02:38 +0000 (15:02 +0000)]
[mvebu]: mark the default WRT1900AC image "factory"
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41648
Imre Kaloz [Mon, 14 Jul 2014 15:00:36 +0000 (15:00 +0000)]
[mvebu]: handle sysupgrade tar files on the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41647
Imre Kaloz [Mon, 14 Jul 2014 14:53:15 +0000 (14:53 +0000)]
[procd]: allow overriding the kernel partition's name
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41646
Jonas Gorski [Mon, 14 Jul 2014 14:39:00 +0000 (14:39 +0000)]
kernel: remove stray " from igp module title
Fixes #17108.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41645
Steven Barth [Mon, 14 Jul 2014 13:39:03 +0000 (13:39 +0000)]
odhcpd: disable packet socket if unneeded to preserve performance
SVN-Revision: 41644
Gabor Juhos [Mon, 14 Jul 2014 11:10:00 +0000 (11:10 +0000)]
ar71xx: fix ALFA NETWORK's name
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41643
Gabor Juhos [Mon, 14 Jul 2014 10:25:53 +0000 (10:25 +0000)]
ar71xx: add profile and build image for the EnGenius ESR900
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5715/
[juhosg: change subject]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41642
Gabor Juhos [Mon, 14 Jul 2014 10:25:51 +0000 (10:25 +0000)]
ar71xx: add user-space support for the EnGenius ESR900
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5716/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41641
Gabor Juhos [Mon, 14 Jul 2014 10:25:51 +0000 (10:25 +0000)]
ar71xx: add kernel support for the EnGenius ESR900
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5714/
[juhosg:
- drop nvram.c modifications,
- create a separate kernel patch,
- use ath79_setup_qca955x_eth_cfg helper,
- merge esr900_{010,common}_setup functions,
- statically init AR8327 pad configurations,
- use pr_err instead of printk]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41640
Gabor Juhos [Mon, 14 Jul 2014 10:25:49 +0000 (10:25 +0000)]
base-files: strip quotes from the MAC address in macaddr_canonicalize()
Extracted from http://patchwork.openwrt.org/patch/5716/
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41639
John Crispin [Mon, 14 Jul 2014 07:38:52 +0000 (07:38 +0000)]
lantiq: detect board in preinit state
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41638
John Crispin [Mon, 14 Jul 2014 07:38:48 +0000 (07:38 +0000)]
kernel: add igb kernel module
Added igb kernel module which supports a variety of Intel GigE PCIe devices
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 41637
John Crispin [Mon, 14 Jul 2014 07:38:43 +0000 (07:38 +0000)]
ar71xx: add support for nanostation m xw
SVN-Revision: 41636
John Crispin [Mon, 14 Jul 2014 07:38:39 +0000 (07:38 +0000)]
ar8216: add new phyid 0x004dd043 (ar8326)
Used in ubiquity nanostation xw boards
SVN-Revision: 41635
John Crispin [Mon, 14 Jul 2014 07:38:32 +0000 (07:38 +0000)]
ramips: fix port mapping and extract wmac eeprom on ZBT-WA05 board
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41634
John Crispin [Mon, 14 Jul 2014 07:38:28 +0000 (07:38 +0000)]
ramips: extract mac address from flash on WHR-600D board
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41633
John Crispin [Mon, 14 Jul 2014 07:38:23 +0000 (07:38 +0000)]
ramips: extract default lan_mac from eth0
The default case of ramips_setup_macs() is useful when mtd-mac-address is defined in dts.
But lan_mac is not set by default, this results in lan and wan having the same mac.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41632
Imre Kaloz [Sun, 13 Jul 2014 22:15:03 +0000 (22:15 +0000)]
[mvebu]: use the full boardname for the wrt1900ac image
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41631
Imre Kaloz [Sun, 13 Jul 2014 22:12:56 +0000 (22:12 +0000)]
[mvebu]: add sysupgrade support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41630
Imre Kaloz [Sun, 13 Jul 2014 22:11:43 +0000 (22:11 +0000)]
[mvebu]: update wrt1900ac dts
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41629
Imre Kaloz [Sun, 13 Jul 2014 20:51:17 +0000 (20:51 +0000)]
[procd]: we already have a get_magic_long() in common.sh for sysupgrade, don't break it
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41628
Gabor Juhos [Sun, 13 Jul 2014 19:44:00 +0000 (19:44 +0000)]
ar71xx: use ath79_setup_qca955x_eth_cfg helper for QCA955x based boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41627
Gabor Juhos [Sun, 13 Jul 2014 19:43:59 +0000 (19:43 +0000)]
ar71xx: add profile and build image for EnGenius ESR1750
Signed-off-by: Jon Suphammer <jon@suphammer.net>
Patchwork: http://patchwork.openwrt.org/patch/5840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41626
Gabor Juhos [Sun, 13 Jul 2014 19:43:58 +0000 (19:43 +0000)]
ar71xx: add user-space support for EnGenius ESR1750
Signed-off-by: Jon Suphammer <jon@suphammer.net>
Patchwork: http://patchwork.openwrt.org/patch/5840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41625
Gabor Juhos [Sun, 13 Jul 2014 19:43:57 +0000 (19:43 +0000)]
ar71xx: add kernel support for EnGenius ESR1750
Signed-off-by: Jon Suphammer <jon@suphammer.net>
Patchwork: http://patchwork.openwrt.org/patch/5840/
[juhosg:
- fix coding style in mach-esr1750.c,
- rename and refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41624
Gabor Juhos [Sun, 13 Jul 2014 19:43:56 +0000 (19:43 +0000)]
ar71xx: add a helper function for setting up ETH_CFG register on QCA955x
Signed-off-by: Jon Suphammer <jon@suphammer.net>
Patchwork: http://patchwork.openwrt.org/patch/5839/
[juhosg: fix coding style]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41623
Gabor Juhos [Sun, 13 Jul 2014 19:43:54 +0000 (19:43 +0000)]
ar71xx: allow ath79_nvram_parse_mac_addr parsing mac with quotes
Signed-off-by: Jon Suphammer <jon@suphammer.net>
Patchwork: http://patchwork.openwrt.org/patch/5838/
[juhosg:
- fix coding style,
- check the first and the last character of the MAC string
instead of using the strchr() function]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41622
Gabor Juhos [Sun, 13 Jul 2014 18:21:09 +0000 (18:21 +0000)]
ar71xx: add profile and build image for GL.iNet v1
Patch is based on http://patchwork.openwrt.org/patch/5273/.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Mark Janssen <mark@sig-io.nl>
Signed-off-by: alzhao <alzhao@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5653/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41621
Gabor Juhos [Sun, 13 Jul 2014 18:21:08 +0000 (18:21 +0000)]
firmware-utils/mktplinkfw: add support for GL.iNet v1
Patch is based on http://patchwork.openwrt.org/patch/5273/.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Mark Janssen <mark@sig-io.nl>
Signed-off-by: alzhao <alzhao@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5653/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41620
Gabor Juhos [Sun, 13 Jul 2014 18:21:06 +0000 (18:21 +0000)]
ar71xx: add user-space support for GL.iNet v1
Patch is based on http://patchwork.openwrt.org/patch/5273/.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Mark Janssen <mark@sig-io.nl>
Signed-off-by: alzhao <alzhao@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5652/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41619
Gabor Juhos [Sun, 13 Jul 2014 18:21:04 +0000 (18:21 +0000)]
ar71xx: add kernel support for GL-Inet V1 boards/routers
The GL-Connect GL.iNet v1 router is basically a TP-Link TL-WR703N with
more DRAM/Flash, 2x Ethernet ports and console/GPIO header in the same
small form-factor:
<http://www.gl-inet.com/w/?lang=en>
Moreover, the manufacturer is promoting the OpenWrt usage to replace
the original firmware and proposing patches against both AA and trunk:
<http://www.gl-inet.com/w/?p=398&lang=en>
This is a clean up of the original manufacturer GPLv2 patch by alzhao,
proposed to the list by Mark Janssen.
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Mark Janssen <mark@sig-io.nl>
Signed-off-by: alzhao <alzhao@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5273/
[juhosg:
- remove user-space and image generation support, will be included
from other patches,
- fix coding style and drop superfluous comment in mach-gl-inet.c,
- rename and refresh kernel patch,
- adjust subject]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41618
Gabor Juhos [Sun, 13 Jul 2014 16:25:58 +0000 (16:25 +0000)]
ar71xx: Support for Mikrotik RB2011UiAS
The RB2011UiAS is almost exactly the same as the RB2011UAS, which is
already supported. Hardware-wise, it adds a passive power injector on
Eth10. Software-wise, Routerboot passes a different board name on the
kernel command line. Hence the need for a patch.
Not yet working:
* touchscreen: doesn't work on RB2011UAS either. The touchscreen itself
seems to be driven by an ADS7843-compatible IC, but figuring out which
GPIO pins it's connected to is work for the future.
* control of power injector: remains off. Probably also GPIO-controlled.
Signed-off-by: Soren Harward <stharward@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5841/
[juhosg: rename and refresh the kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41617
Gabor Juhos [Sun, 13 Jul 2014 16:25:57 +0000 (16:25 +0000)]
ar71xx: select correct Kconfig symbol in the Mikrotik SXT Lite patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41616
Gabor Juhos [Sun, 13 Jul 2014 16:25:56 +0000 (16:25 +0000)]
ar71xx: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41615
Gabor Juhos [Sun, 13 Jul 2014 16:25:54 +0000 (16:25 +0000)]
kernel: sort Kconfig options in kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41614
Felix Fietkau [Sun, 13 Jul 2014 10:24:34 +0000 (10:24 +0000)]
base-files: adjust the default netfilter tcp established connection timeout as per RFC 5382 (#17098)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41599
John Crispin [Sun, 13 Jul 2014 10:03:41 +0000 (10:03 +0000)]
ar71xx: add support for TP-LINK TL-WA860RE v1
New router/repeater from TP-LINK
- CPU: Atheros AR9341-DL3A (AP123)
- Flash: 4MB
- Ram: 32MB
Similar to TL-WA850RE.
Changes: rename file after r41596
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 41598
John Crispin [Sun, 13 Jul 2014 07:17:54 +0000 (07:17 +0000)]
lantiq: configure uboot-envtools on BTHOMEHUBV2B and make it work correctly on other lantiq boards
Generate the configuration file for uboot-envtools
on BTHOMEHUBV2B. Adds the specific parameters for the
BTHOMEHUBV2B and also fixes an incorrect path which
would have affected other lantiq boards as well
(currently only the GIGASX76X).
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 41597
John Crispin [Sun, 13 Jul 2014 07:12:22 +0000 (07:12 +0000)]
ar71xx: added support for TL-WA830RE V2
Corrected patch ath79 insted of auth79. Sorry.
Signed-off-by: Fredrik Jonson <fredrik@famjonson.se>
SVN-Revision: 41596
Hauke Mehrtens [Sat, 12 Jul 2014 15:41:50 +0000 (15:41 +0000)]
b43-tools: b43-fwsquash.py: manually remove LP-PHY 16 support
I have never seen a LP-PHY with core rev 16 or higher, but the ucode
will be included, because we need LP-PHY 13 and 15 and N-PHY core rev
16. Comment out the code for now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41595
Hauke Mehrtens [Sat, 12 Jul 2014 15:39:31 +0000 (15:39 +0000)]
brcm47xx: deactivate ssb and old phy code for new devices
This deactivates ssb and G-PHY code in b43 for the mips74k profile in
brcm47xx.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41594
Hauke Mehrtens [Sat, 12 Jul 2014 15:37:34 +0000 (15:37 +0000)]
mac80211: b43: backport b43 patches from wireless testing
This brings b43 up to wireless-testing/master master-2014-07-10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41593
Hauke Mehrtens [Sat, 12 Jul 2014 14:56:21 +0000 (14:56 +0000)]
b43-tools: b43-fwsquash.py: add new firmware files
This adds support for new firmware files from b43 and selects the ucode
based on the PHY type now.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41592
Jonas Gorski [Sat, 12 Jul 2014 12:31:47 +0000 (12:31 +0000)]
brcm63xx: update irq affinity code to latest version
Reduces code size a bit and sets affinity to boot cpu by default.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41591
Jonas Gorski [Sat, 12 Jul 2014 12:31:45 +0000 (12:31 +0000)]
brcm63xx: base-files: order board names alphabetically
Restore alphatetical order in uci-defaults scripts and brcm63xx.sh
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41590
Jonas Gorski [Sat, 12 Jul 2014 12:31:43 +0000 (12:31 +0000)]
brcm63xx: Use leds script for Huawei HG556a and improve profile
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41589
Jonas Gorski [Sat, 12 Jul 2014 12:31:39 +0000 (12:31 +0000)]
brcm63xx: Fix HW553 support
- adsl and lan leds are swapped.
- internetkey is labeled as hspa.
- enable status led and reset button for failsafe.
- use new leds script.
- fix switch configuration.
- remove enet0 from board_info.
- add profile.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41588
Jonas Gorski [Sat, 12 Jul 2014 12:31:35 +0000 (12:31 +0000)]
brcm63xx: Use model name for Comtrend AR-5381u
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41587
Jonas Gorski [Sat, 12 Jul 2014 12:31:33 +0000 (12:31 +0000)]
brcm63xx: Use model name for Comtrend AR-5387un
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41586
Jonas Gorski [Sat, 12 Jul 2014 12:31:30 +0000 (12:31 +0000)]
brcm63xx: Use model name for ADB P.DG A4001N1
This patch also makes use of the new leds script.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41585
John Crispin [Sat, 12 Jul 2014 06:54:03 +0000 (06:54 +0000)]
ramips: add support for WR8305RT board
Signed-off-by: Jorge Vargas <jorge.vargas@sosvia.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41584
John Crispin [Sat, 12 Jul 2014 06:50:21 +0000 (06:50 +0000)]
brcm2708: Use uci-defaults for network config
By using uci-defaults force_link is enabled, which fixes some link issues if ethernet cable isn't connected when LAN is initialized.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 41583
Luka Perkov [Fri, 11 Jul 2014 13:28:44 +0000 (13:28 +0000)]
kernel: update 3.14 to 3.14.12
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 41582
Luka Perkov [Thu, 10 Jul 2014 22:37:28 +0000 (22:37 +0000)]
kernel: remove 3.12 support since none of the targets is using it
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 41581
John Crispin [Thu, 10 Jul 2014 22:02:31 +0000 (22:02 +0000)]
imagebuilder: x86 fails to build inside the imagebuilder
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41580
John Crispin [Thu, 10 Jul 2014 22:02:28 +0000 (22:02 +0000)]
ramips: add support for Zbtlink WA05 router
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41579
John Crispin [Thu, 10 Jul 2014 22:02:24 +0000 (22:02 +0000)]
imx6: put kernel and dtb into rootfs by default
this will make the rc1 images boot with the default config.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41578
Felix Fietkau [Thu, 10 Jul 2014 21:11:02 +0000 (21:11 +0000)]
ar8216: disable EEE by default on AR8327 to fix stability issues (#14597)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41577
Felix Fietkau [Thu, 10 Jul 2014 20:48:31 +0000 (20:48 +0000)]
toolchain: switch back to uClibc for octeon, it actually works now
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41576
Felix Fietkau [Thu, 10 Jul 2014 20:44:03 +0000 (20:44 +0000)]
octeon: fix edgerouter pro ethernet device probe order
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41575
John Crispin [Thu, 10 Jul 2014 20:15:50 +0000 (20:15 +0000)]
target/linux/*: more dead package cleanups
found 2 more
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41574
Felix Fietkau [Thu, 10 Jul 2014 20:14:58 +0000 (20:14 +0000)]
uClibc: fix copy&pasted typo in the stat fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41573
Felix Fietkau [Thu, 10 Jul 2014 20:14:54 +0000 (20:14 +0000)]
octeon: add basic board detection for UBNT EdgeRouter PRO
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41572
John Crispin [Thu, 10 Jul 2014 20:05:43 +0000 (20:05 +0000)]
target/linux/*: more dead package cleanups
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41571
Felix Fietkau [Thu, 10 Jul 2014 19:28:45 +0000 (19:28 +0000)]
uClibc: add a whole bunch of mips64 related fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41570
Felix Fietkau [Thu, 10 Jul 2014 19:28:40 +0000 (19:28 +0000)]
gcc: backport a fix for issues with accessing weak data references
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41569
Felix Fietkau [Thu, 10 Jul 2014 19:28:37 +0000 (19:28 +0000)]
octeon: backport a few upstream fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41568
John Crispin [Thu, 10 Jul 2014 19:16:43 +0000 (19:16 +0000)]
lantiq: generate /tmp/sysinfo/lantiq_board_name if missing
Run lantiq_board_detect from lantiq_board_name and lantiq_board_model.
This was the one thing missing from r41474 for sysupgrade board
detection to work properly.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 41567
John Crispin [Thu, 10 Jul 2014 19:16:39 +0000 (19:16 +0000)]
lantiq: enable SysupgradeNAND for BTHOMEHUBV2B
Enables SysupgradeNAND for BTHOMEHUBV2B.
Depends on the following patches:
http://patchwork.openwrt.org/patch/5817/
http://patchwork.openwrt.org/patch/5848/
http://patchwork.openwrt.org/patch/5851/
Many thanks everyone for your help the last couple of days.
Ben
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 41566
John Crispin [Thu, 10 Jul 2014 19:16:35 +0000 (19:16 +0000)]
lantiq xway: disable gluebi and enable ubiblock
Disables gluebi and enables ubiblock on lantiq xway. Squashfs
images on nand use ubifs instead of jffs2 for the overlay.
I'll leave the equivalent patch for xrx200 to someone who has a
board to test.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 41565
John Crispin [Thu, 10 Jul 2014 19:16:31 +0000 (19:16 +0000)]
procd: correctly identify ubifs in tar file
A missing path prevents the rootfs type contained in a SysupgradeNAND
tar file from being determined correctly.
This fixes it, and also corrects a minor spelling mistake.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 41564
John Crispin [Thu, 10 Jul 2014 19:16:27 +0000 (19:16 +0000)]
sysupgrade: Enable killing of all processes under upgraded
If the sysupgrade scripts is called under upgraded, it will not kill all
other processes as it should to avoid interference by locked filesystem.
This patch checks the parent and if it is upgraded, it kills all.
Signed-off-by: André Valentin <avalentin@marcant.net>
SVN-Revision: 41563
John Crispin [Thu, 10 Jul 2014 19:16:23 +0000 (19:16 +0000)]
ar71xx: nbg6716: extract ath10k wifi board.bin
With help of this script the ath10k board.bin settings are loaded from
flash and saved to the ath10k firmware directory. The driver reads it
later in the boot process.
Signed-off-by: André Valentin <avalentin@marcant.net>
SVN-Revision: 41562
projects / openwrt / svn-archive / archive.git / log