staging: wilc1000: fixes no space is necessary after a cast

This patch fixes the check reported by checkpatch.pl
for 'no space is necessary after a cast'.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_frmw_to_linux(): fixes null check

Null checking wilc_netdev and skb->dev are already done in the begining of the
function and they are just print printing error log, so delete them.
Null checking wilc is needed before is used so add null ckeck before it is
used.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix alignment for open parenthesis

This patch fixes the check found by checkpatch.pl
CHECK: Alignment should match open parenthesis

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: call power save after changing mode

host_int_set_power_mgmt should be called after changing operation mode to
work properly. Move the function below host_int_set_operation_mode.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: change_virtual_intf: change codes for unified firmware

In previous patch, we use unified firmware on wilc, which means we do not need
to download firmware again to change virtual interfaces.
There are a lot of codes to change interface and they are needless now, so
remove them except wilc_set_operation_mode function which change the mode and
wilc_set_power_mgmt which control power save.
There will be unused functions and they will be removed in later patch.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: set proper bssid address

This patch changes index 0 to index of vif which is currently beging used
because AP mode can run on any interface.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: set bssid with mode

This patch add new argument mode to wilc_wlan_set_bssid and define mode in
struct wilc_vif also. The mode is used by get_if_handler function to get proper
netdevice for each mode.
The get_if_handler is changed together. Remove invalid handle codes and
add mode condition to get netdevice for the mode.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove wilc_set_machw_change_vir_if

wilc_set_machw_change_vir_if is not used anymore since we use one unified
firmware. Instead, wilc_set_operation_mode is called when wilc_mac_open to
let the wilc use the proper firmware. Remove wilc_set_machw_change_vir_if
and it's functions calls.
In the later patch, mac index will be passed to wilc device.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use unified firmware

Use a unified firmware for all mode of operations which are station, ap and
p2p. Two firmware are introduced for 1002 and 1003 chipset.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: get address from wilc

Get mac address from wilc device instead of using random mac address.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove sleep and reduce close timeout

sleep is not necessary during handling tx queue so remove it and also reduce
close time to 5 sec since it is enough time to close.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: add ops resuem/suspend/wakeup in cfg80211

This patch adds ops resume, suspend and set_wakeup in cfg80211. Together with
previous patches, driver will support suspend/resume functionality.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: sdio_init: add resume argument

Part of sdio init codes should not run when sdio init function is called on
sdio resume so skip them.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: add sdio resume/suspend

This patch introduces sdio device suspend and resume functionality. sdio_reset
function is added to reset sdio. Remove static inline keyword from
chip_allow_sleep and chip_wakeup, and export symbols.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: support suspend/resume functionality

wilc supports suspend/resume functionality. Introduce new sleep and wakeup
functions and remove old codes since that will be handled in the new functions.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove define WILC_OPTIMIZE_SLEEP_INT

Take the codes of WILC_OPTIMIZE_SLEEP_INT and remove codes inside ifndef.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix bug when changing virtual interface

This patch fixes a bug connection error when changing virtual interface to p2p.
Variable quit needs to be set 0 when wilc is reinitialized again.

Fixes : 67e2a07ed800 ("staging: wilc1000: move all of wilc_wlan_dev_t to struct wilc")
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove over-commenting

There are over-commenting in wilc_msgqueue.h file. This comment is not
explain exactly what codes do and make checkpatch warning about "line
over 80 charcters". If necessary, comment will be added later with
preferred coding style.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix logical continuations

This patch fixes logical continuations found by checkpatch
CHECK: Logical continuations should be on the previous line

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix coding style of kmalloc usage

This patch fixes coding style of kmalloc usage found by checkpatch.
CHECK: Prefer kmalloc(sizeof(*new_msg)...) over kmalloc(sizeof(struct message)...)

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrMessage in wilc_mq_recv

This patch renames pstrMessage to msg to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu32ReceivedLength in wilc_mq_recv

This patch renames pu32ReceivedLength to recv_len to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32RecvBufferSize in wilc_mq_recv

This patch renames u32RecvBufferSize to recv_buf_size to avoid
camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pvRecvBuffer in wilc_mq_recv

This patch renames pvRecvBuffer to recv_buf to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pHandle in wilc_mq_recv

This patch renames pHandle to mq to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return error code

Three argument are checked at the beginning of wilc_mq_send whether
they are valid arguments or not. It is correct to use return error code
as -EINVAL, not -EFAULT.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrTailMsg in wilc_mq_send

This patch renames pstrTailMsg to tail_msg to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrMessage in wilc_mq_send

This patch renames pstrMessage to new_msg to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32SendBufferSize in wilc_mq_send

This patch renames u32SendBufferSize to send_buf_size to avoid
camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pvSendBuffer in wilc_mq_send

This patch renames pvSendBuffer to send_buf to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pHandle in wilc_mq_send

This patch renames pHandle to mq to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrMessge in wilc_mq_destroy

This patch renames pstrMessge to msg to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pHandle in wilc_mq_destroy

This patch renames pHandle to mq to avoid camelcase

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pHandle in wilc_mq_create

This patch renames pHandle to mq to avoid camelcase

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrMessageList in struct message_queue

This patch renames pstrMessageList to msg_list to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32ReceiversCount in struct message_queue

This patch renames u32ReceiversCount to recv_count to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename bExiting in struct message_queue

This patch renames bExiting to exiting to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename strCriticalSection in struct message_queue

This patch renames strCriticalSection to lock to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename hSem in struct message_queue

This patch renames hSem to sem to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename struct WILC_MsgQueueHandle

This patch removes typedef from struct WILC_MsgQueueHandle and renames
it to struct message_queue.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrNext in struct message

This patch renames pstrNext to next to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32Length in struct message

This patch renames u32Length to len to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pvBuffer in struct message

This patch renames pvBuffer to buf to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename struct __Message_struct

This patch renames typedef from struct __Message_struct and renames it
to struct message.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove redundant check in wilc_mq_recv

At the beginning of wilc_mq_recv, it is checked if pHandle->bExiting is
false or true. There is no need to check it again at the middle of this
function. So just remove it.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove extraneous variable

Building wilc1000 with clang currently fails in the staging-next branch:

drivers/staging/wilc1000/wilc_spi.c:123:34: warning: tentative definition of variable with internal linkage has incomplete non-array type 'const struct wilc1000_ops' [-Wtentative-definition-incomplete-type]
static const struct wilc1000_ops wilc1000_spi_ops;

The reason is that wilc1000_ops was left behind after a recent cleanup,
and is completely unused and also uninitialized and const and has an
incomplete type.

Removing the variable is obviously correct, and gets rid of the warning.
No idea why gcc does not complain about it though.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return type of wilc_init

This patch changes return type of wilc_init from s32 to int.
The error code as -ENOMEM or -EFAULT is returned in the wilc_init.
It is better to use return type of int in this function, not s32.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename phWFIDrv in wilc_init declaration

The second argument name is different between wilc_init declaration and
definition. This patch renames phWFIDrv to hif_drv_handler to match
argument name.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use kmemdup instead of kmalloc/memcpy

This patch replaces kmalloc followed by memcpy with kmemdup.
It is also added error checking to return -ENOMEM when kmemdup is
failed.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrHiddenNetwork in wilc_scan

This patch renames pstrHiddenNetwork to hidden_network to avoid
camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pvUserArg in wilc_scan

This patch renames pvUserArg to user_arg to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename ScanResult in wilc_scan

This patch renames ScanResult to scan_result to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename IEsLen in wilc_scan

This patch renames IEsLen to ies_len to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8IEs in wilc_scan

This patch renames pu8IEs to ies to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8ChnlListLen in wilc_scan

This patch renames u8ChnlListLen to ch_list_len to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8ChnlFreqList in wilc_scan

This patch renames pu8ChnlFreqList to ch_freq_list to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8ScanType in wilc_scan

This patch renames u8ScanType to scan_type to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8ScanSource in wilc_scan

This patch renames u8ScanSource to scan_source to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return type of wilc_scan

This patch changes return type of wilc_scan from s32 to int.
The result variable gets return value from wilc_mq_send that has data
type of int. It should be changed return type of this function as well
as data type of result variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8ssidnum in struct hidden_network

This patch renames u8ssidnum to n_ssids that is a member of struct
hidden_network. There is no need to use u8 prefix to show data type so
just rename it.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrHiddenNetworkInfo in struct hidden_network

This patch renames pstrHiddenNetworkInfo to net_info to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8ssidlen in struct hidden_net_info

This patch renames u8ssidlen to ssid_len that is a member of
hidden_net_info. There is no need to use u8 prefix to show data type so
just rename it.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8ssid in struct hidden_net_info

This patch renames pu8ssid to ssid that is a member of struct
hidden_net_info. There is no need to use pu8 prefix to show data type so
just remove it.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: make some variables static

terminated_handle is used only in host_interface.c
wilc1000_spi_driver is exported by module_spi_driver()

This fixes a few Sparse warnings.

Signed-off-by: Hugo Camboulive <hugo.camboulive@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: add missing __user attribute

This removes a Sparse warning.

Signed-off-by: Hugo Camboulive <hugo.camboulive@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrSetBeaconParam in wilc_add_beacon

This patch renames pstrSetBeaconParam to beacon_info to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8Tail in wilc_add_beacon

This patch renames pu8Tail to tail to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32TailLen in wilc_add_beacon

This patch renames u32TailLen to tail_len to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8Head in wilc_add_beacon

This patch renames pu8Head to head to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32HeadLen in wilc_add_beacon

This patch renames u32HeadLen to head_len to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32DTIMPeriod in wilc_add_beacon

This patch renames u32DTIMPeriod to dtim_period to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32Interval in wilc_add_beacon

This patch renames u32Interval to interval to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return type of wilc_add_beacon

This patch changes return type of wilc_add_beacon from s32 to int.
The result variable gets return value from wilc_mq_send that has data
type of int. It should be changed return type of this function as well
as result variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u8AssocNumb in wilc_del_allstation

This patch renames u8AssocNumb to assoc_sta to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use int instead of u32

The variable i is used as array index so that it is better to use data
type of int.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename au8Zero_Buff in wilc_del_allstation

This patch renames au8Zero_Buff to zero_addr to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrDelAllStationMsg in wilc_del_allstation

This patch renames pstrDelAllStationMsg to del_all_sta_info to avoid
camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pu8MacAddr in wilc_del_allstation

This patch renames pu8MacAddr to mac_addr to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return type of wilc_del_allstation

This patch changes return type of wilc_del_allstation from s32 to int.
The result variable gets return value from wilc_mq_send that has data
type of int. It should be changed return type of this function as well
as data type of result variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove rates variable in wilc_edit_station

Instead of using rates variable, it is used as add_sta_info->rates
directly.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use kmemdup in wilc_edit_station

This patch replaces kmalloc followed by memcpy with kmemdup.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrAddStationMsg in wilc_edit_station

This patch renames pstrAddStationMsg to add_sta_info to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pstrStaParams in wilc_edit_station

This patch renames pstrStaParams to sta_param to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return type of wilc_edit_station

This patch changes return type of wilc_edit_station from s32 to int.
The result variable gets return value from wilc_mq_send that has data
type of int. It should be changed return type of this function as well
as data type of result variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pBASessionInfo in wilc_del_all_rx_ba_session

This patch renames pBASessionInfo to ba_session_info to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename TID in wilc_del_all_rx_ba_session

This patch renames TID to tid to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pBSSID in wilc_del_all_rx_ba_session

This patch renames pBSSID to bssid to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return type of wilc_del_all_rx_ba_session

This patch changes return type of wilc_del_all_rx_ba_session from s32 to
int. The result variable gets return value from wilc_mq_send that has
return type of int. It should be changed return type of this function as
well as data type of result variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename pvUserArg in wilc_remain_on_channel

This patch renames pvUserArg to user_arg to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename RemainOnChanReady in wilc_remain_on_channel

This patch renames RemainOnChanReady to ready to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename RemainOnChanExpired in wilc_remain_on_channel

This patch renames RemainOnChanExpired to expired to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32duration in wilc_remain_on_channel

This patch renames u32duration to duration to remove u32 prefix.
There is no need u32 prefix to show data type of this variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32SessionID in wilc_remain_on_channel

This patch renames u32SessionID to session_id to avoid camelcase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return type of wilc_remain_on_channel

This patch changes return type of wilc_remain_on_channel from s32 to
int. The result variable gets return value from wilc_mq_send that has
data type of int. It should be changed return type of this function as
well as data type of result variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u32duration in struct remain_ch

The patch renames u32duration to duration that is a member of struct
remain_ch. The prefix u32 shows data type of its member, but there is no
need to use u32 prefix to represent data type.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: move static declaration of host_int_get_ipaddress

This patch moves static function declaration to front part of
host_interface.c file.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename u16ipadd in host_int_get_ipaddress

This patch renames u16ipadd to ip_addr to remove u16 prefix.
There is no need to use this prefix to show data type of this argument.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove argument hif_drv in host_int_get_ipaddress

This patch removes hif_drv argument of host_int_get_ipaddress.
There is no need to pass hif_drv in this function because hif_drv is a
member of vif. It is removed struct host_if_drv and use hif_drv of vif.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix return type of host_int_get_ipaddress

This patch changes return type of host_int_get_ipaddress from s32 to
int. The result variable gets return value from wilc_mq_send that has
data type of int. It should be changed return type of this function as
well as data type of result variable.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove return statement

This patch removes return statement that is always returned 0.
wilc_setup_ipaddress can not run to the end due to return statement.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>