drm/amdgpu/sriov:now must reinit psp

otherwise after VF FLR the KIQ cannot work

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: merge bios post checking functions

Merge the post checking functions to avoid confusion and take
virtualization into account in all cases.

Signed-off-by: pding <Pixel.Ding@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-intel-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Last batch of drm/i915 features for v4.15:

- transparent huge pages support (Matthew)
- uapi: I915_PARAM_HAS_SCHEDULER into a capability bitmask (Chris)
- execlists: preemption (Chris)
- scheduler: user defined priorities (Chris)
- execlists optimization (Michał)
- plenty of display fixes (Imre)
- has_ipc fix (Rodrigo)
- platform features definition refactoring (Rodrigo)
- legacy cursor update fix (Maarten)
- fix vblank waits for cursor updates (Maarten)
- reprogram dmc firmware on resume, dmc state fix (Imre)
- remove use_mmio_flip module parameter (Maarten)
- wa fixes (Oscar)
- huc/guc firmware refacoring (Sagar, Michal)
- push encoder specific code to encoder hooks (Jani)
- DP MST fixes (Dhinakaran)
- eDP power sequencing fixes (Manasi)
- selftest updates (Chris, Matthew)
- mmu notifier cpu hotplug deadlock fix (Daniel)
- more VBT parser refactoring (Jani)
- max pipe refactoring (Mika Kahola)
- rc6/rps refactoring and separation (Sagar)
- userptr lockdep fix (Chris)
- tracepoint fixes and defunct tracepoint removal (Chris)
- use rcu instead of abusing stop_machine (Daniel)
- plenty of other fixes all around (Everyone)

* tag 'drm-intel-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-intel: (145 commits)
  drm/i915: Update DRIVER_DATE to 20171012
  drm/i915: Simplify intel_sanitize_enable_ppgtt
  drm/i915/userptr: Drop struct_mutex before cleanup
  drm/i915/dp: limit sink rates based on rate
  drm/i915/dp: centralize max source rate conditions more
  drm/i915: Allow PCH platforms fall back to BIOS LVDS mode
  drm/i915: Reuse normal state readout for LVDS/DVO fixed mode
  drm/i915: Use rcu instead of stop_machine in set_wedged
  drm/i915: Introduce separate status variable for RC6 and LLC ring frequency setup
  drm/i915: Create generic functions to control RC6, RPS
  drm/i915: Create generic function to setup LLC ring frequency table
  drm/i915: Rename intel_enable_rc6 to intel_rc6_enabled
  drm/i915: Name structure in dev_priv that contains RPS/RC6 state as "gt_pm"
  drm/i915: Move rps.hw_lock to dev_priv and s/hw_lock/pcu_lock
  drm/i915: Name i915_runtime_pm structure in dev_priv as "runtime_pm"
  drm/i915: Separate RPS and RC6 handling for CHV
  drm/i915: Separate RPS and RC6 handling for VLV
  drm/i915: Separate RPS and RC6 handling for BDW
  drm/i915: Remove superfluous IS_BDW checks and non-BDW changes from gen8_enable_rps
  drm/i915: Separate RPS and RC6 handling for gen6+
  ...

Merge branch 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux into drm-next

Last set of features for 4.15.  Highlights:
- Add a bo flag to allow buffers to opt out of implicit sync
- Add ctx priority setting interface
- Lots more powerplay cleanups
- Start to plumb through vram lost infrastructure for gpu reset
- ttm support for huge pages
- misc cleanups and bug fixes

* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (73 commits)
  drm/amd/powerplay: Place the constant on the right side of the test
  drm/amd/powerplay: Remove useless variable
  drm/amd/powerplay: Don't cast kzalloc() return value
  drm/amdgpu: allow GTT overcommit during bind
  drm/amdgpu: linear validate first then bind to GART
  drm/amd/pp: Fix overflow when setup decf/pix/disp dpm table.
  drm/amd/pp: thermal control not enabled on vega10.
  drm/amdgpu: busywait KIQ register accessing (v4)
  drm/amdgpu: report more amdgpu_fence_info
  drm/amdgpu:don't check soft_reset for sriov
  drm/amdgpu:fix duplicated setting job's vram_lost
  drm/amdgpu:reduce wb to 512 slot
  drm/amdgpu: fix regresstion on SR-IOV gpu reset failed
  drm/amd/powerplay: Tidy up cz_dpm_powerup_vce()
  drm/amd/powerplay: Tidy up cz_dpm_powerdown_vce()
  drm/amd/powerplay: Tidy up cz_dpm_update_vce_dpm()
  drm/amd/powerplay: Tidy up cz_dpm_update_uvd_dpm()
  drm/amd/powerplay: Tidy up cz_dpm_powerup_uvd()
  drm/amd/powerplay: Tidy up cz_dpm_powerdown_uvd()
  drm/amd/powerplay: Tidy up cz_start_dpm()
  ...

drm/amd/powerplay: Place the constant on the right side of the test

Move the constant on the right side of the comparison in order to
make the code easier to read.

Issue found by checkpatch script:
* WARNING: Comparisons should place the constant on the right side of
the test

Signed-off-by: Georgiana Chelu <georgiana.chelu93@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Remove useless variable

The result variable is initialized at the beginning of the function, but
its value does not change during the function execution. Thus, remove the
variable and return the SUCCESS value, which is 0.

Issue found by coccinelle script:
* Unneeded variable: "result". Return "0"

Path to the cocci script: scripts/coccinelle/misc/returnvar.cocci

Signed-off-by: Georgiana Chelu <georgiana.chelu93@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Don't cast kzalloc() return value

The kzalloc function returns a void pointer and the assignment
operator converts it to the type of pointer it is assigned to.
Therefore, there is no need to cast.

Issue found by alloc_cast.cocci:
* WARNING: casting value returned by memory allocation function
to <struct type> is useless.

Path to the cocci script: scripts/coccinelle/api/alloc/alloc_cast.cocci

Signed-off-by: Georgiana Chelu <georgiana.chelu93@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allow GTT overcommit during bind

While binding BOs to GART we need to allow a bit overcommit in the GTT
domain. Otherwise we can never use the full GART space when GART size=GTT size.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: linear validate first then bind to GART

For VM emulation for old UVD/VCE we need to validate the BO with linear
VRAM flag set first and then eventually bind it to GART.

Validating with linear VRAM flag set can move the BO to GART making
UVD/VCE read/write from an unbound GART BO.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: Fix overflow when setup decf/pix/disp dpm table.

Clear the count in the single table setup function to
avoid missing any tables.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: thermal control not enabled on vega10.

regression issue.
caused by "f12f9f5e5d455edebc01"
forget to set start_thermal_controller function point.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: busywait KIQ register accessing (v4)

Register accessing is performed when IRQ is disabled. Never sleep in
this function.

Known issue: dead sleep in many use cases of index/data registers.

v2:
 - wrap polling fence functions.
 - don't trigger IRQ for polling in case of wrongly fence signal.

v3:
 - handle wrap round gracefully.
 - add comments for polling function

v4:
 - don't return negative timeout confused with error code

Signed-off-by: pding <Pixel.Ding@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: report more amdgpu_fence_info

Only for GFX ring. This can help checking MCBP feature.

The fence at the end of the frame will indicate the completion status.
If the frame completed normally, the fence is written to the address
given in the EVENT_WRITE_EOP packet. If preemption occurred in the
previous IB the address is adjusted by 2 DWs. If work submitted in the
frame was reset before completion, the fence address is adjusted by
four DWs. In the case that preemption occurred, and before preemption
completed a reset was initiated, the address will be adjusted with six
DWs

Signed-off-by: pding <Pixel.Ding@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:don't check soft_reset for sriov

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Ack-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:fix duplicated setting job's vram_lost

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:reduce wb to 512 slot

with current WB usage we only use 57 slots, so 512
is extreamly sufficient, and reduce to 512 can
make WB fit into one page.

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix regresstion on SR-IOV gpu reset failed

fw ucode is corrupted after vf flr by PSP so ucode_init() is
a must in psp_hw_init othewise KIQ/KCQ enabling will fail

Revert "drm/amdgpu: refine code delete duplicated error handling"
This reverts commit e57b87ff828f95efe992468e6d18c2c059b27aa9.
Revert "drm/amdgpu: move amdgpu_ucode_init_bo to amdgpu_device.c"
This reverts commit 815b8f8595148d06a64d2ce4282e8e80dfcb02f1.

Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Tidy up cz_dpm_powerup_vce()

Use PP_CAP macro.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Tidy up cz_dpm_powerdown_vce()

Use PP_CAP macro.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Tidy up cz_dpm_update_vce_dpm()

Use PP_CAP and tidy up indentation.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Tidy up cz_dpm_update_uvd_dpm()

Use PP_CAP and tidy up indentation.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Tidy up cz_dpm_powerup_uvd()

Use PP_CAP and simplify enable/disable logic.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Tidy up cz_dpm_powerdown_uvd()

Use PP_CAP and tidy up indentation.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: Tidy up cz_start_dpm()

Remove unused variables.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use ARRAY_SIZE

Using the ARRAY_SIZE macro improves the readability of the code.

Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
 (sizeof(E)@p /sizeof(*E))
|
 (sizeof(E)@p /sizeof(E[...]))
|
 (sizeof(E)@p /sizeof(T))
)

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: reserve root PD while releasing it

Otherwise somebody could try to evict it at the same time and try to use
half torn down structures.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: fix the fix for huge compound pages

We don't use compound pages at the moment. Take this into account when
freeing them.

Signed-off-by: Christian König <christian.koenig@amd.comd>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: bump version for vram lost counter query (v2)

v2: vram -> VRAM in comment

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: minor CS optimization

We only need to loop over all IBs for old UVD/VCE command stream patching.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/sched: fix job tear down order v2

Move the trace before we signal the scheduler fence and drop the
scheduler fence reference directly before we free the job.

v2: keep extra s_fence reference

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Liu, Monk <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add amdgpu_find_mm_node()

Replace some commonly repeated code with a function.

v2: Use amdgpu_find_mm_node() in amdgpu_ttm_io_mem_pfn()

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Refactor amdgpu_move_blit

Add more generic function amdgpu_copy_ttm_mem_to_mem() that supports
arbitrary copy size, offsets and two BOs (source & dest.).

This is useful for KFD Cross Memory Attach feature where data needs to
be copied from BOs from different processes

v2: Add struct amdgpu_copy_mem and changed amdgpu_copy_ttm_mem_to_mem()
function parameters to use the struct

v3: Minor function name change

Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix extra call to amdgpu_ctx_put.

In amdgpu_cs_parser_init() in case of error handling
amdgpu_ctx_put() is called without setting p->ctx to NULL after that,
later amdgpu_cs_parser_fini() also calls amdgpu_ctx_put() again and
mess up the reference count.

Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Fix unused variables with huge page support

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add VRAM lost query

Allows userspace to figure out if VRAM was lost.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: set -ECANCELED when dropping jobs

And return from the wait functions the fence error code.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move the VRAM lost counter per context

Instead of per device track the VRAM lost per context and return ECANCELED
instead of ENODEV.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: keep copy of VRAM lost counter in job

Instead of reading the current counter from fpriv.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: partial revert VRAM lost handling v2

Keep blocking the CS, but revert everything else. Mapping BOs and info IOCTL
are harmless and can still happen even when VRAM content ist lost.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: add transparent huge page support for wc or uc allocations v2

Add a new huge page pool and try to allocate from it when it makes sense.

v2: avoid compound pages for now

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: move more logic into ttm_page_pool_get_pages

Make it easier to add huge page pool.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: add transparent huge page support for cached allocations v2

Try to allocate huge pages when it makes sense.

v2: avoid compound pages for now

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: don't use compound pages for now

We need to figure out first how to correctly map them into the CPU page tables.

bug: https://bugs.freedesktop.org/show_bug.cgi?id=103138
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct reference clock value on vega10

Old value from bringup was wrong.

Cc: stable@vger.kernel.org
Signed-off-by: Ken Wang <Ken.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: SR-IOV data exchange between PF&VF

SR-IOV need to exchange some data between PF&VF through shared VRAM

PF will copy some necessary firmware and information to the shared
VRAM. It also requires some information from VF. PF will send a
key through mailbox2 to help guest calculate checksum so that it can
verify whether the data is correct.

So check the data on the specified offset of the shared VRAM, if the
checksum is right, read values from it and write some VF information
next to the data from PF.

Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move old fence waiting before reservation lock is aquired v2

Helps avoiding deadlock during GPU reset.
Added mutex to amdgpu_ctx to preserve order of fences on a ring.

v2:
Put waiting logic in a function in a seperate function in amdgpu_ctx.c

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Refactor amdgpu_cs_ib_vm_chunk and amdgpu_cs_ib_fill.

This enables old fence waiting before reservation lock is aquired
which in turn is part of a bigger solution to deadlock happening
when gpu reset with VRAM recovery accures during intensive rendering.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: make function uvd_v6_0_enc_get_destroy_msg static

The function uvd_v6_0_enc_get_destroy_msg is local to the source and
does not need to be in global scope, so make it static.

Cleans up sparse warning:
symbol 'uvd_v6_0_enc_get_destroy_msg' was not declared. Should it be
static?

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: remove polaris10_smc/smumgr split.

move functions in polaris_smc.c to
polaris10_smumgr.c and make all functions in
polaris10_smumgr.c static.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: remove tonga_smc/smumgr split.

move functions in tonga_smc.c to tonga_smumgr.c
and make all functions in tonga_smumgr.c static.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: remove iceland_smc/smumgr split.

move functions in iceland_smc.c to iceland_smumgr.c
and make all functions in iceland_smumgr.c static.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: remove fiji_smc/smumgr split.

make all functions in fiji_smumgr.c static and
exported by pp_smumgr_func table.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: rename ci_smc.c to ci_smumgr.c

for consistency.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: refine code delete duplicated error handling

in function amdgpu_ucode_init_bo, when failed, it will
set load_type to AMDGPU_FW_LOAD_DIRECT.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: move common function to smu7_smumgr.c

fiji and polaris can share same setup_pwr_virus
function.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: implement function notify_cac_buffer_info on VI

Used for smu power logging.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: implement function notify_cac_buffer_info on Vega

Used for smu power logging.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: add new function point in hwmgr.

used for notify SMU the allocated buffer address.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp: export new smu messages for vega10

New messages for smu power logging.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: get the temperature on CZ

Setting the function pointer to the get the temperature on CZ.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Satyajit Sahu <satyajit.sahu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: bump version for new AMDGPU_SCHED ioctl

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: rename context priority levels

Don't leak implementation details about how each priority behaves to
usermode. This allows greater flexibility in the future.

Squash into c2636dc53abd8269a0930bccd564f2f195dba729

Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/plane: drop num_overlay_planes (v3)

In order to implement plane leasing we need to count things,
just make the code consistent with the counting code currently
used for counting crtcs/encoders/connectors and drop the need
for num_overlay_planes.

v2: don't forget to assign plane_ptr. (keithp)
v3: use correct bounds check, found by igt.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'tilcdc-4.15' of https://github.com/jsarha/linux into drm-next

tilcdc changes for v4.15

* tag 'tilcdc-4.15' of https://github.com/jsarha/linux:
  drm/tilcdc: Remove redundant OF_DETACHED flag setting
  drm/tilcdc: Precalculate total frametime in tilcdc_crtc_set_mode()
  drm/tilcdc: Use tilcdc_crtc_shutdown() in tilcdc_crtc_destroy()
  drm/tilcdc: Remove WARN_ON(!drm_modeset_is_locked(&crtc->mutex)) checks
  drm/tilcdc: Turn raster off in crtc reset, if it was on in the HW
  drm/tilcdc: switch to drm_*{get,put} helpers
  drm/tilcdc: tilcdc_tfp410: make of_device_ids const.
  drm/tilcdc: tilcdc_panel: make of_device_ids const.

Merge tag 'drm-misc-next-2017-10-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Quick 4.15 misc pull for the build fix:

Cross-subsystem Changes:
- piles an piles of misc/trivial patches all over, some more from
  outreachy applicants

Core Changes:
- build fix for the bridge/of cleanup (Maarten)
- fix vblank count in arm_vblank_event (Ville)
- some kerneldoc typo fixes from Thierry

Driver Changes:
- vc4: Fix T-format tiling scanout, cleanup clock divider w/a (Anholt)
- sun4i: small cleanups and improved code comments all over (Chen-Yu
  Tsai)

* tag 'drm-misc-next-2017-10-16' of git://anongit.freedesktop.org/drm/drm-misc: (21 commits)
  drm/via: use ARRAY_SIZE
  drm/gma500: use ARRAY_SIZE
  drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set function
  drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits
  drm/sun4i: backend: Add comment explaining why registers are cleared
  drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memory
  drm/sun4i: backend: Create regmap after access is possible
  drm/sun4i: don't add components that are already in the queue
  drm/vc4: Fix pitch setup for T-format scanout.
  drm/vc4: Move the DSI clock divider workaround closer to the clock call.
  drm: Replace kzalloc with kcalloc
  drm/tinydrm: Remove explicit .best_encoder assignment
  drm/tinydrm: Replace dev_error with DRM_DEV_ERROR
  drm/drm_of: Move drm_of_panel_bridge_remove_function into header.
  drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event()
  drm/atomic-helper: Fix typo
  drm: Add missing __user annotation to drm_syncobj_array_find()
  drm/rockchip: add PINCTRL dependency for LVDS
  drm/kirin: Checking for IS_ERR() instead of NULL
  driver:gpu: return -ENOMEM on allocation failure.
  ...

drm/via: use ARRAY_SIZE

Using the ARRAY_SIZE macro improves the readability of the code.

Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
 (sizeof(E)@p /sizeof(*E))
|
 (sizeof(E)@p /sizeof(E[...]))
|
 (sizeof(E)@p /sizeof(T))
)

Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016023357.20174-1-jeremy.lefaure@lse.epita.fr

drm/gma500: use ARRAY_SIZE

Using the ARRAY_SIZE macro improves the readability of the code. Also,
it is useless to re-invent it.

Found with Coccinelle with the following semantic patch:
@r depends on (org || report)@
type T;
T[] E;
position p;
@@
(
 (sizeof(E)@p /sizeof(*E))
|
 (sizeof(E)@p /sizeof(E[...]))
|
 (sizeof(E)@p /sizeof(T))
)

Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jérémy Lefaure <jeremy.lefaure@lse.epita.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171016023047.19145-1-jeremy.lefaure@lse.epita.fr

drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set function

Initially we configured the PAD_CTRL1 register at probe/bind time.
However it seems the HDMI controller will modify some of the bits
in this register by itself. On the A10 it is particularly annoying
as it toggles the output invert bits, which inverts the colors on
the display output.

The U-boot driver this driver is based on sets this register twice,
though it seems it's only needed for actual display output. Hence
we move it to the mode_set function.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-8-wens@csie.org

drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits

While debugging inverted color from the HDMI output on the A10, I
found that the lowest 3 bits were set. These were cleared on A20
boards that had normal display output. By manually toggling these
bits the mapping of the color components to these bits was found.

While these are not used anywhere, it would be nice to document
them somewhere.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-7-wens@csie.org

drm/sun4i: backend: Add comment explaining why registers are cleared

Many of the backend's layer configuration registers have undefined
default values. This poses a risk as we use regmap_update_bits in
some places, and don't overwrite the whole register.

At probe/bind time we explicitly clear all the control registers
by writing 0 to them. This patch adds a more detailed explanation
on why we're doing this.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-5-wens@csie.org

drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memory

Commit 4636ce93d5b2 ("drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()")
adds a new helper, which covers fetching a drm_framebuffer's GEM object
and calculating the buffer address for a given plane.

This patch uses this helper to replace our own open coded version of the
same function.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-4-wens@csie.org

drm/sun4i: backend: Create regmap after access is possible

The backend has various clocks and reset controls that need to be
enabled and deasserted before register access is possible.

Move the creation of the regmap to after the clocks and reset controls
have been configured where it makes more sense.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-3-wens@csie.org

drm/sun4i: don't add components that are already in the queue

Even though the components framework can handle duplicate entries,
the extra entries cause a lot more debug messages to be generated,
which would be confusing to developers not familiar with our driver
and the framework in general.

Instead, we can scan the relatively small queue and check if the
component to be added is already queued up. Since the display
pipelines are symmetrical (not considering the third display
pipeline on the A80), and we add components level by level, when
we get to the second instance at the same level, any shared downstream
components would already be in the queue.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-2-wens@csie.org

drm/vc4: Fix pitch setup for T-format scanout.

The documentation said to use src_w here, and I didn't consider that
we actually needed to be using pitch somewhere in our setup.  Fixes
scanout on my DSI panel when X11 does initial setup with 1920x1080
HDMI and 800x480 DSI both at 0,0 of the same framebuffer.

v2: Add some comments requested by Boris

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 98830d91da08 ("drm/vc4: Add T-format scanout support.")
Link: https://patchwork.freedesktop.org/patch/msgid/20170927193209.11870-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>

Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next

Most notable addition this time is the support for the GPU performance
counters by Christian. This has been in the making for some time and it
has matured a lot. Since this is adding UAPI, the corresponding WIP
userspace can be found at [1] mesa/libdrm repos. I expect that
Christian sends out the final userspace patches for this once you have
pulled the kernel bits.

Philipp optimized the probe path, so etnaviv gets out of the way for
systems that want to boot real quick.

I've done mostly cleanups, disentangling etnaviv from the IOMMU API,
with some MMUv1 optimizations on the way.

* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: (36 commits)
  drm/etnaviv: remove unnecessary clock stabilization delay
  drm/etnaviv: reduce reset delay
  drm/etnaviv: remove unused function etnaviv_gem_new
  drm/etnaviv: remove stale comment
  drm/etnaviv: submit supports performance monitor requests
  drm/etnaviv: enable debug registers on demand
  drm/etnaviv: need to disable clock gating when doing profiling
  drm/etnaviv: add MC perf domain
  drm/etnaviv: add TX perf domain
  drm/etnaviv: add RA perf domain
  drm/etnaviv: add SE perf domain
  drm/etnaviv: add PA perf domain
  drm/etnaviv: add SH perf domain
  drm/etnaviv: add PE perf domain
  drm/etnaviv: add HI perf domain
  drm/etnaviv: use 'sync points' for performance monitor requests
  drm/etnaviv: clear alloced event
  drm/etnaviv: add 'sync point' support
  drm/etnaviv: add performance monitor request processing
  drm/etnaviv: copy pmrs from userspace
  ...

drm/vc4: Move the DSI clock divider workaround closer to the clock call.

We want the adjusted_mode->clock to be the actual clock we're
expecting to program, so that consumers see the right values for clock
and vrefresh.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20170815234722.20700-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>

drm: Replace kzalloc with kcalloc

Prefer kcalloc over kzalloc to allocate an array.
This patch fixes checkcpatch issue.

Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013073747.29877-1-harshasharmaiitr@gmail.com
Link: https://patchwork.freedesktop.org/patch/msgid/20171013073747.29877-1-harshasharmaiitr@gmail.com

drm/tinydrm: Remove explicit .best_encoder assignment

Since the driver is relying on the atomic helpers, remove the explicit
.best_encoder assignment and let the core call
drm_atomic_helper_best_encoder().

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010205858.GA4806@Haneen

drm/tinydrm: Replace dev_error with DRM_DEV_ERROR

Convert instances of dev_error to DRM_DEV_ERROR as we have
DRM_DEV_ERROR variants of drm print macros.

Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171006221738.30200-1-harshasharmaiitr@gmail.com

drm/drm_of: Move drm_of_panel_bridge_remove_function into header.

Core drm shouldn't depend on anything in drm-kms-helper, or the drm
module will fail to load.

insmod drm fails with
[ 6087.674390] drm: Unknown symbol drm_panel_bridge_remove (err 0)

which is defined in drm_kms_helper.ko

This call was added by commit c70087e8f16f ("drm/drm_of: add
drm_of_panel_bridge_remove function"), and the fix is defining it in the
drm_of.h header, to break the circular dependency.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8f95e623-9480-97dc-2414-77086d8aa49d@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com> #irc
Fixes: c70087e8f16f ("drm/drm_of: add drm_of_panel_bridge_remove function")
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event()

Fix up this reference so that the proper link is generated in the
documentation and so that people don't go chasing after the wrong
function for an embarrassingly long time.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012140857.9559-1-thierry.reding@gmail.com

drm/atomic-helper: Fix typo

Fix "esay-to-use" to "easy-to-use" typo.

Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171012140616.9002-1-thierry.reding@gmail.com

drm: Add missing __user annotation to drm_syncobj_array_find()

'user_handles' needs a __user annotation for fix the following sparse
warning:
drm_syncobj.c:813:37: warning: incorrect type in argument 2 (different address spaces)
drm_syncobj.c:813:37:    expected void const [noderef] <asn:1>*from
drm_syncobj.c:813:37:    got void *user_handles
drm_syncobj.c:875:38: warning: incorrect type in argument 2 (different address spaces)
drm_syncobj.c:875:38:    expected void *user_handles
drm_syncobj.c:875:38:    got void [noderef] <asn:1>*<noident>
drm_syncobj.c:908:38: warning: incorrect type in argument 2 (different address spaces)
drm_syncobj.c:908:38:    expected void *user_handles
drm_syncobj.c:908:38:    got void [noderef] <asn:1>*<noident>
drm_syncobj.c:941:38: warning: incorrect type in argument 2 (different address spaces)
drm_syncobj.c:941:38:    expected void *user_handles
drm_syncobj.c:941:38:    got void [noderef] <asn:1>*<noident>

Cc: Jason Ekstrand <jason@jlekstrand.net>
Fixes: 3e6fb72d6cef ("drm/syncobj: Add a syncobj_array_find helper")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170901165328.24459-2-ville.syrjala@linux.intel.com
Reviewed-by: Thierry Reding <treding@nvidia.com>

drm/tilcdc: Remove redundant OF_DETACHED flag setting

of_fdt_unflatten_tree() already sets the flag on this node to
OF_DETACHED, because of_fdt_unflatten_tree() calls
__unflatten_device_tree() with the detached bool set to true.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Jyri Sarha <jsarha@ti.com>

drm/tilcdc: Precalculate total frametime in tilcdc_crtc_set_mode()

We need the total frame refresh time to check if we are too close to
vertical sync when updating the two framebuffer DMA registers and risk
a collision. This new method is more accurate that the previous that
based on mode's vrefresh value, which itself is inaccurate or may not
even be initialized.

Reported-by: Kevin Hao <kexin.hao@windriver.com>
Fixes: 11abbc9f39e0 ("drm/tilcdc: Set framebuffer DMA address to HW only if CRTC is enabled")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Merge tag 'omapdrm-4.15' of git://git./linux/kernel/git/tomba/linux into drm-next

omapdrm changes for 4.15

* OMAP4 HDMI CEC support

* tag 'omapdrm-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  omapdrm: omapdss_hdmi_ops: add lost_hotplug op
  omapdrm: hdmi4: hook up the HDMI CEC support
  omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support
  omapdrm: hdmi4: refcount hdmi_power_on/off_core
  omapdrm: hdmi4: move hdmi4_core_powerdown_disable to hdmi_power_on_core()
  omapdrm: hdmi4: prepare irq handling for HDMI CEC support
  omapdrm: hdmi4: make low-level functions available
  omapdrm: hdmi.h: extend hdmi_core_data with CEC fields
  omapdrm: encoder-tpd12s015: keep ls_oe_gpio high

Merge tag 'drm-misc-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

More 4.15 drm-misc stuff:

Cross-subsystem Changes:
- bridge cleanup refactor (Benjamin Gaignard)

Core Changes:
- less surprising atomic iterators (Maarten), fixes an oops introduced
  in drm-next
- better gem/fb helper docs (Noralf)
- fix dma-buf rcu races (Christian König)

Driver Changes:
- adv7511: CEC support (Hans Verkuil)
- sun4i update from Chen-Yu to improve hdmi and A31 support
- sii8620: add remote control support (Maceiej Purski)

New drivers:
- SiI9234 bridge driver (Maciej Purski)
- 7" rpi touch panel (Eric Anholt)

Note that this contains a topic pull from regmap, needed by the sun4i
changes. Mark Brown sent that out for pulling into drm-misc.

* tag 'drm-misc-next-2017-10-12' of git://anongit.freedesktop.org/drm/drm-misc: (29 commits)
  drm/dp: WARN about invalid/unknown link rates and bw codes
  drm/msm/mdp5: remove less than 0 comparison for unsigned value
  drm/bridge/sii8620: add remote control support
  drm/sun4i: hdmi: Add support for A31's HDMI controller
  drm/sun4i: hdmi: Add A31 specific DDC register definitions
  drm/sun4i: hdmi: Add support for controller hardware variants
  dt-bindings: display: sun4i: Add binding for A31 HDMI controller
  drm/sun4i: hdmi: Allow using second PLL as TMDS clk parent
  drm/sun4i: hdmi: create a regmap for later use
  drm/sun4i: hdmi: Disable clks in bind function error path and unbind function
  drm/sun4i: tcon: Add support for demuxing TCON output on A31
  drm/sun4i: tcon: Add variant callback for TCON output muxing
  drm/bridge/synopsys: dsi :remove is_panel_bridge
  drm/vc4: remove bridge from driver internal structure
  drm/stm: ltdc: remove bridge from driver internal structure
  drm/drm_of: add drm_of_panel_bridge_remove function
  drm/bridge: make drm_panel_bridge_remove more robust
  dma-fence: fix dma_fence_get_rcu_safe v2
  dma-buf: make reservation_object_copy_fences rcu save
  drm/atomic: Unref duplicated drm_atomic_state in drm_atomic_helper_resume()
  ...

drm/rockchip: add PINCTRL dependency for LVDS

The new driver fails to build when CONFIG_PINCTRL is disabled:

drivers/gpu/drm/rockchip/rockchip_lvds.c: In function 'rockchip_lvds_grf_config':
drivers/gpu/drm/rockchip/rockchip_lvds.c:229:39: error: dereferencing pointer to incomplete type 'struct dev_pin_info'
   if (lvds->pins && !IS_ERR(lvds->pins->default_state))

This adds the respective Kconfig dependency.

Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005120957.485433-1-arnd@arndb.de

drm: vblank: remove drm_timestamp_monotonic parameter

There is a risk of overflowing vblank timestamps in 2038 or 2106 if
someone sets the drm_timestamp_monotonic module parameter to zero.

I found no indication of anyone ever setting the parameter, or
complaining about the default being wrong, after it was introduced
as a way to handle backwards-compatibility with linux prior to
c61eef726a78 ("drm: add support for monotonic vblank timestamps"),
so it's probably safer to just remove the parameter completely
and only allowing the default behavior.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: vblank: use ktime_t instead of timeval

The drm vblank handling uses 'timeval' to store timestamps in either
monotonic or wall-clock time base. In either case, it reads the current
time as a ktime_t in get_drm_timestamp() and converts it from there.

This is a bit suspicious, as users of 'timeval' often suffer from
the time_t overflow in y2038. I have gone through this code and
found that it is unlikely to cause problems here:

- The user space ABI does not use time_t or timeval, but uses
  'u32' and 'long' as the types. This means at least that rebuilding
  user programs against a new libc with 64-bit time_t does not
  change the ABI.

- As of commit c61eef726a78 ("drm: add support for monotonic vblank
  timestamps") in linux-3.8, the monotonic timestamp is the default
  and can only get reverted to wall-clock through a module-parameter.

- With the default monotonic timestamps, there is no problem at all.

- The drm_wait_vblank_ioctl() interface is alway safe on 64-bit
  architectures, on 32-bit it might overflow the 'long' timestamps
  in 2038 with wall-clock timestamps.

- The event handling uses 'u32' seconds, which overflow in 2106
  on both 32-bit and 64-bit machines, when wall-clock timestamps
  are used.

- The effect of overflowing either of the two is only temporary
  (during the overflow, and is likely to keep working again
  afterwards. It is likely the same problem as observing a
  'settimeofday()' call, which was the reason for moving to the
  monotonic timestamps in the first place.

Overall, this seems good enough, so my patch removes the use of
'timeval' from the vblank handling altogether and uses ktime_t
consistently, except for the part where we copy the data to user
space structures in the existing format.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/kirin: Checking for IS_ERR() instead of NULL

The of_graph_get_remote_node() function doesn't return error pointers,
it returns NULL on error so I've updated the check.

Fixes: 86418f90a4c1 ("drm: convert drivers to use of_graph_get_remote_node")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005125751.jvtjms62vbtxuvak@mwanda

drm/i915: Update DRIVER_DATE to 20171012

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

driver:gpu: return -ENOMEM on allocation failure.

Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1505287939-14106-3-git-send-email-allen.lkml@gmail.com

drm/vblank: Fix flip event vblank count

On machines where the vblank interrupt fires some time after the start
of vblank (or we just manage to race with the vblank interrupt handler)
we will currently stuff a stale vblank counter value into the flip event,
and thus we'll prematurely complete the flip.

Switch over to drm_crtc_accurate_vblank_count() to make sure we have an
up to date counter value, crucially also remember to add the +1 so that
the delayed vblank interrupt won't complete the flip prematurely.

Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010133322.24029-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel@ffwll.ch> #irc

drm/i915: Simplify intel_sanitize_enable_ppgtt

Remove dead code around has_aliasing_ppgtt condition.

Suggested-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171010143355.16577-1-joonas.lahtinen@linux.intel.com

drm/i915/userptr: Drop struct_mutex before cleanup

Purely to silence lockdep, as we know that no bo can exist at this time
and so the inversion is impossible. Nevertheless, lockdep currently
warns on unload:

[  137.522565] WARNING: possible circular locking dependency detected
[  137.522568] 4.14.0-rc4-CI-CI_DRM_3209+ #1 Tainted: G     U
[  137.522570] ------------------------------------------------------
[  137.522572] drv_module_relo/1532 is trying to acquire lock:
[  137.522574]  ("i915-userptr-acquire"){+.+.}, at: [<ffffffff8109a831>] flush_workqueue+0x91/0x540
[  137.522581]
               but task is already holding lock:
[  137.522583]  (&dev->struct_mutex){+.+.}, at: [<ffffffffa014fb3f>] i915_gem_fini+0x3f/0xc0 [i915]
[  137.522605]
               which lock already depends on the new lock.

[  137.522608]
               the existing dependency chain (in reverse order) is:
[  137.522611]
               -> #3 (&dev->struct_mutex){+.+.}:
[  137.522615]        __lock_acquire+0x1420/0x15e0
[  137.522618]        lock_acquire+0xb0/0x200
[  137.522621]        __mutex_lock+0x86/0x9b0
[  137.522623]        mutex_lock_interruptible_nested+0x1b/0x20
[  137.522640]        i915_mutex_lock_interruptible+0x51/0x130 [i915]
[  137.522657]        i915_gem_fault+0x20b/0x720 [i915]
[  137.522660]        __do_fault+0x1e/0x80
[  137.522662]        __handle_mm_fault+0xa08/0xed0
[  137.522664]        handle_mm_fault+0x156/0x300
[  137.522666]        __do_page_fault+0x2c5/0x570
[  137.522668]        do_page_fault+0x28/0x250
[  137.522671]        page_fault+0x22/0x30
[  137.522672]
               -> #2 (&mm->mmap_sem){++++}:
[  137.522677]        __lock_acquire+0x1420/0x15e0
[  137.522679]        lock_acquire+0xb0/0x200
[  137.522682]        down_read+0x3e/0x70
[  137.522699]        __i915_gem_userptr_get_pages_worker+0x141/0x240 [i915]
[  137.522701]        process_one_work+0x233/0x660
[  137.522704]        worker_thread+0x4e/0x3b0
[  137.522706]        kthread+0x152/0x190
[  137.522708]        ret_from_fork+0x27/0x40
[  137.522710]
               -> #1 ((&work->work)){+.+.}:
[  137.522714]        __lock_acquire+0x1420/0x15e0
[  137.522717]        lock_acquire+0xb0/0x200
[  137.522719]        process_one_work+0x206/0x660
[  137.522721]        worker_thread+0x4e/0x3b0
[  137.522723]        kthread+0x152/0x190
[  137.522725]        ret_from_fork+0x27/0x40
[  137.522727]
               -> #0 ("i915-userptr-acquire"){+.+.}:
[  137.522731]        check_prev_add+0x430/0x840
[  137.522733]        __lock_acquire+0x1420/0x15e0
[  137.522735]        lock_acquire+0xb0/0x200
[  137.522738]        flush_workqueue+0xb4/0x540
[  137.522740]        drain_workqueue+0xd4/0x1b0
[  137.522742]        destroy_workqueue+0x1c/0x200
[  137.522758]        i915_gem_cleanup_userptr+0x15/0x20 [i915]
[  137.522770]        i915_gem_fini+0x5f/0xc0 [i915]
[  137.522782]        i915_driver_unload+0x122/0x180 [i915]
[  137.522794]        i915_pci_remove+0x19/0x30 [i915]
[  137.522797]        pci_device_remove+0x39/0xb0
[  137.522800]        device_release_driver_internal+0x15d/0x220
[  137.522803]        driver_detach+0x40/0x80
[  137.522805]        bus_remove_driver+0x58/0xd0
[  137.522807]        driver_unregister+0x2c/0x40
[  137.522809]        pci_unregister_driver+0x36/0xb0
[  137.522828]        i915_exit+0x1a/0x8b [i915]
[  137.522831]        SyS_delete_module+0x18c/0x1e0
[  137.522834]        entry_SYSCALL_64_fastpath+0x1c/0xb1
[  137.522835]
               other info that might help us debug this:

[  137.522838] Chain exists of:
                 "i915-userptr-acquire" --> &mm->mmap_sem --> &dev->struct_mutex

[  137.522844]  Possible unsafe locking scenario:

[  137.522846]        CPU0                    CPU1
[  137.522848]        ----                    ----
[  137.522850]   lock(&dev->struct_mutex);
[  137.522852]                                lock(&mm->mmap_sem);
[  137.522854]                                lock(&dev->struct_mutex);
[  137.522857]   lock("i915-userptr-acquire");
[  137.522859]
                *** DEADLOCK ***

[  137.522862] 3 locks held by drv_module_relo/1532:
[  137.522864]  #0:  (&dev->mutex){....}, at: [<ffffffff8161d47b>] device_release_driver_internal+0x2b/0x220
[  137.522869]  #1:  (&dev->mutex){....}, at: [<ffffffff8161d489>] device_release_driver_internal+0x39/0x220
[  137.522873]  #2:  (&dev->struct_mutex){+.+.}, at: [<ffffffffa014fb3f>] i915_gem_fini+0x3f/0xc0 [i915]
[  137.522888]
               stack backtrace:
[  137.522891] CPU: 0 PID: 1532 Comm: drv_module_relo Tainted: G     U          4.14.0-rc4-CI-CI_DRM_3209+ #1
[  137.522894] Hardware name:                  /NUC7i5BNB, BIOS BNKBL357.86A.0048.2017.0704.1415 07/04/2017
[  137.522897] Call Trace:
[  137.522900]  dump_stack+0x68/0x9f
[  137.522902]  print_circular_bug+0x235/0x3c0
[  137.522905]  ? lockdep_init_map_crosslock+0x20/0x20
[  137.522908]  check_prev_add+0x430/0x840
[  137.522919]  ? i915_gem_fini+0x5f/0xc0 [i915]
[  137.522922]  ? __kernel_text_address+0x12/0x40
[  137.522925]  ? __save_stack_trace+0x66/0xd0
[  137.522928]  __lock_acquire+0x1420/0x15e0
[  137.522930]  ? __lock_acquire+0x1420/0x15e0
[  137.522933]  ? lockdep_init_map_crosslock+0x20/0x20
[  137.522936]  ? __this_cpu_preempt_check+0x13/0x20
[  137.522938]  lock_acquire+0xb0/0x200
[  137.522940]  ? flush_workqueue+0x91/0x540
[  137.522943]  flush_workqueue+0xb4/0x540
[  137.522945]  ? flush_workqueue+0x91/0x540
[  137.522948]  ? __mutex_unlock_slowpath+0x43/0x2c0
[  137.522951]  ? trace_hardirqs_on_caller+0xe3/0x1b0
[  137.522954]  drain_workqueue+0xd4/0x1b0
[  137.522956]  ? drain_workqueue+0xd4/0x1b0
[  137.522958]  destroy_workqueue+0x1c/0x200
[  137.522975]  i915_gem_cleanup_userptr+0x15/0x20 [i915]
[  137.522987]  i915_gem_fini+0x5f/0xc0 [i915]
[  137.523000]  i915_driver_unload+0x122/0x180 [i915]
[  137.523015]  i915_pci_remove+0x19/0x30 [i915]
[  137.523018]  pci_device_remove+0x39/0xb0
[  137.523021]  device_release_driver_internal+0x15d/0x220
[  137.523023]  driver_detach+0x40/0x80
[  137.523026]  bus_remove_driver+0x58/0xd0
[  137.523028]  driver_unregister+0x2c/0x40
[  137.523030]  pci_unregister_driver+0x36/0xb0
[  137.523049]  i915_exit+0x1a/0x8b [i915]
[  137.523052]  SyS_delete_module+0x18c/0x1e0
[  137.523055]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[  137.523057] RIP: 0033:0x7f7bd0609287
[  137.523059] RSP: 002b:00007ffef694bc18 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
[  137.523062] RAX: ffffffffffffffda RBX: ffffffff81493f33 RCX: 00007f7bd0609287
[  137.523065] RDX: 0000000000000001 RSI: 0000000000000800 RDI: 0000564f999f9fc8
[  137.523067] RBP: ffffc90005c4ff88 R08: 0000000000000000 R09: 0000000000000080
[  137.523069] R10: 00007f7bd20ef8c0 R11: 0000000000000246 R12: 0000000000000000
[  137.523072] R13: 00007ffef694be00 R14: 0000000000000000 R15: 0000000000000000
[  137.523075]  ? __this_cpu_preempt_check+0x13/0x20

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171011141857.14161-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

omapdrm: omapdss_hdmi_ops: add lost_hotplug op

The CEC framework needs to know when the hotplug detect signal
disappears, since that means the CEC physical address has to be
invalidated (i.e. set to f.f.f.f).

Add a lost_hotplug op that is called when the HPD signal goes away.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

omapdrm: hdmi4: hook up the HDMI CEC support

Hook up the HDMI CEC support in the hdmi4 driver.

It add the CEC irq handler, the CEC (un)init calls and tells the CEC
implementation when the physical address changes.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support

Add the source and header for the OMAP4 HDMI CEC support.

This code is not yet hooked up, that will happen in the next patch.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

omapdrm: hdmi4: refcount hdmi_power_on/off_core

The hdmi_power_on/off_core functions can be called multiple times:
when the HPD changes and when the HDMI CEC support needs to power
the HDMI core.

So use a counter to know when to really power on or off the HDMI core.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>