Eneas U de Queiroz [Mon, 7 Oct 2019 21:02:38 +0000 (18:02 -0300)]
hostapd: adjust to removal of WOLFSSL_HAS_AES_GCM
WolfSSL is always built with AES-GCM support now.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Rosen Penev [Mon, 7 Oct 2019 22:59:52 +0000 (15:59 -0700)]
uClibc++: Fix three bugs
The first allows usage of several functions in the std namespace, which
broke compilation of gddrescue specifically with uClibc-ng and uClibc++.
The second allows usage of long long with normal C++11, which is part of
the standard. Before, std=gnu++11 needed to be passsed to work around it.
As a result of the second patch, the pedantic patch can safely be removed.
Both patches are upstream backports.
Added -std=c++11 to CFLAGS to guarentee proper inclusion of long long.
Added another patch that fixes a typo with the long long support. Sent to
upstream.
Fixed up license information according to SPDX.
Small cleanups for consistency.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Martin Schiller [Wed, 18 Sep 2019 04:35:10 +0000 (06:35 +0200)]
lantiq: add set_port_link feature to xrx200-net driver
This makes it possible to configure the link attributes (aneg, duplex,
speed) of each switch ports.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Scott Roberts [Fri, 27 Sep 2019 20:19:01 +0000 (14:19 -0600)]
mvebu: backport mvneta and comphy from linux 5.x
These patches backport support for the ARMADA 3700 COMPHY driver.
Also backported is the mvneta driver. This will allow switching
the SGMII speed using SMC calls. To support this you must update
the firmware using Marvells 18.12 version (this has now been
upstreamed). The mvneta driver allows 2500basex and 2500baset.
Signed-off-by: Scott Roberts <ttocsr@gmail.com>
Eubert Bao [Sat, 21 Sep 2019 04:44:16 +0000 (21:44 -0700)]
kirkwood: Fix FS#505 - Can't install LEDE on Linksys EA3500
The default sizes render Device/linksys_audi mage un-flashable.
Restore the pagesize, subpagesize, and blocksize for linksys_audi
from https://github.com/openwrt/archive.
Signed-off-by: Eubert Bao <bunnier@gmail.com>
Moritz Warning [Wed, 25 Sep 2019 22:02:21 +0000 (00:02 +0200)]
pistachio: split up DEVICE_TITLE
DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT
Signed-off-by: Moritz Warning <moritzwarning@web.de>
Sungbo Eo [Tue, 8 Oct 2019 14:25:03 +0000 (23:25 +0900)]
kernel: fix typos in video KernelPackage description
Fixes: 4b3d17b709a5 ("kernel: add kmod-fb-sys-ram")
Fixes: b774acb47912 ("package/modules: add missing gspca video drivers for 2.6.32 (patch from #6595)")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Wed, 9 Oct 2019 02:15:55 +0000 (11:15 +0900)]
uboot-oxnas: remove unnecessary execute permission bit
.c files do not need to be executable. 644 is enough.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Wed, 9 Oct 2019 02:15:40 +0000 (11:15 +0900)]
ar71xx: remove unnecessary execute permission bit
.c files do not need to be executable. 644 is enough.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Wed, 9 Oct 2019 02:14:58 +0000 (11:14 +0900)]
mediatek: remove unnecessary execute permission bit
kernel config and dts files do not need to be executable. 644 is enough.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
DENG Qingfang [Sat, 12 Oct 2019 16:29:13 +0000 (00:29 +0800)]
tcpdump: update to 4.9.3
Fixed CVEs:
CVE-2017-16808
CVE-2018-10103
CVE-2018-10105
CVE-2018-14461
CVE-2018-14462
CVE-2018-14463
CVE-2018-14464
CVE-2018-14465
CVE-2018-14466
CVE-2018-14467
CVE-2018-14468
CVE-2018-14469
CVE-2018-14470
CVE-2018-14879
CVE-2018-14880
CVE-2018-14881
CVE-2018-14882
CVE-2018-16227
CVE-2018-16228
CVE-2018-16229
CVE-2018-16230
CVE-2018-16300
CVE-2018-16301
CVE-2018-16451
CVE-2018-16452
CVE-2019-15166
CVE-2019-15167
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
DENG Qingfang [Sat, 12 Oct 2019 16:28:32 +0000 (00:28 +0800)]
libpcap: update to 1.9.1
Fixed CVEs:
CVE-2018-16301
CVE-2019-15161
CVE-2019-15162
CVE-2019-15163
CVE-2019-15164
CVE-2019-15165
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Hauke Mehrtens [Sat, 12 Oct 2019 18:32:04 +0000 (20:32 +0200)]
mvebu: Refresh kernel 4.19 configuration
This refreshes the kernel 4.19 configuration, it looks like this was not
done initially.
When did a compile with the default settings I had to select some
kernel configuration options.
Fixes: 98684d99b250 ("mvebu: add kernel 4.19 support")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 12 Oct 2019 20:21:46 +0000 (22:21 +0200)]
kernel: Set GCC version to 80300 by default
The kernel 4.19 configuration contains the GCC version used, set it to
8.3.0 as this is now our default compiler.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 12 Oct 2019 20:31:38 +0000 (22:31 +0200)]
kernel: kmod-rtc-pcf2127: Fix dependencies
Add missing dependencies to i2c-core and regmap-spi. These get activated
when these modules are build in this driver, which is the case when we
build all modules. This fixes the build on some targets. This was found
by the buildbot.
Fixes: 34e2526f9fcc ("kernel: add kmod-rtc-pcf2127")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Moritz Warning [Thu, 11 Jul 2019 10:21:01 +0000 (12:21 +0200)]
brcm47xx: split up DEVICE_TITLE
DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT
Signed-off-by: Moritz Warning <moritzwarning@web.de>
Moritz Warning [Wed, 25 Sep 2019 22:13:13 +0000 (00:13 +0200)]
omap: split up DEVICE_TITLE
DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT
Signed-off-by: Moritz Warning <moritzwarning@web.de>
Petr Štetiar [Fri, 11 Oct 2019 20:48:06 +0000 (22:48 +0200)]
libnl-tiny: fix package mirror hash
Current hash doesn't match with the content of the source tarball.
Fixes: a92f74ba8db8 ("libnl-tiny: move source code into separate Git repository")
Reported-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Felix Fietkau [Fri, 11 Oct 2019 08:37:02 +0000 (10:37 +0200)]
build: fix menuconfig submenu sorting for gcc options
The hidden symbol GCC_USE_IREMAP was breaking it, move it to Config.version
instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 10 Oct 2019 21:09:35 +0000 (23:09 +0200)]
mt76: update to the latest version
71c2ef0420b5 mt76: fix aggregation stop issue
5b02a078d4a7 mt76: add missing locking around ampdu action
7d8764d320cf mt76: avoid enabling interrupt if NAPI poll is still pending
d94cc81d3980 mt76: drop rcu read lock in mt76_rx_aggr_stop
c11a4ad06d9d mt76: mt76x0: eeprom: add support for MAC address from OF
01642d8bed33 mt76: mt76x02: fix use-after-free in tx status code handling airtime
391e1488f885 mt76: add sanity check for a-mpdu rx wcid index
d3a589586d1b mt76: fix a-mpdu boundary detection issue for airtime reporting
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hans Dedecker [Thu, 10 Oct 2019 19:53:38 +0000 (21:53 +0200)]
ppp: update to version 2.4.7.git-2019-10-04
0d004db Revert "pppd: Include time.h before using time_t"
e400854 pppdump: Eliminate printf format warning by using %zd
7f2f0de pppd: Refactor setjmp/longjmp with pipe pair in event wait loop
4e71317 make: Avoid using host include for cross-compiling
3202f89 pppoe: Remove the use of cdefs
d8e8d7a pppd: Remove unused rcsid variables
486f854 pppd: Fix GLIBC version test for non-glibc toolchains
b6cd558 pppd: Include time.h before using time_t
ef8ec11 radius: Fix compiler warning
f6330ec magic: Remove K&R style of arguments
347904e Add Submitting-patches.md
Remove patches 130-no_cdefs_h.patch, 131-missing_prototype_macro.patch,
132-fix_linux_includes.patch as fixed upstream
Refresh patches
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Felix Fietkau [Thu, 10 Oct 2019 11:42:56 +0000 (13:42 +0200)]
build: adjust gcc/g++ version checks for newer apple compilers
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stefan Lippers-Hollmann [Wed, 9 Oct 2019 04:21:58 +0000 (06:21 +0200)]
mac80211: fix scan when operating on DFS channels in ETSI domains
In non-ETSI regulatory domains scan is blocked when operating channel
is a DFS channel. For ETSI, however, once DFS channel is marked as
available after the CAC, this channel will remain available (for some
time) even after leaving this channel.
Therefore a scan can be done without any impact on the availability
of the DFS channel as no new CAC is required after the scan.
Enable scan in mac80211 in these cases.
Signed-off-by: Aaron Komisar <aaron.komisar@tandemg.com>
Link: https://lore.kernel.org/r/1570024728-17284-1-git-send-email-aaron.komisar@tandemg.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Klaus Kudielka [Sat, 17 Aug 2019 13:52:01 +0000 (15:52 +0200)]
base-files: upgrade: add case to export_bootdevice
The factory uboot of the Turris Omnia boots with "root=b301", and we
instruct new users to sysupgrade from there (e.g. method 1, step 7).
Currently, this will fail with "Unable to determine upgrade device".
Add a new case to export_bootdevice, which parses the hex argument.
Fixes commit
2e5a0b81 ("mvebu: sysupgrade: sdcard: keep user added ...")
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Oldřich Jedlička [Wed, 25 Sep 2019 19:45:42 +0000 (21:45 +0200)]
kernel: Fix off-by-one error in FIT mtd partition search.
This fixes off-by-one error introduced in commit
dc76900021b8
("kernel: Correctly search for the FIT image in mtd partition.")
Function `mtd_read` starts reading at `offset` and
needs `hdr_len` number of bytes to be available. Suppose
the easiest case when `offset` is `0` and `hdr_len` equals
to `mtd->size` - the `for` loop will not be entered even
when enough bytes are available to be read.
Same happens for any non-zero `offset`, when `hdr_len` is
just enough bytes to be read until `mtd->size` is reached.
Imagine that for example `mtd->size=5`, `offset=4` and
`hdr_len=1`. Then `offset+hdr_len=5` and the check has to
be `offset+hdr_len <= mtd->size`, i.e. `5 <= 5`. The
check for `offset + hdr_len` value needs to be inclusive,
therefore use `<=`.
Fixes: dc76900021b8 ("kernel: Correctly search for the FIT image in mtd partition.")
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
[adjusted commit ref, fixes tag]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Paul Spooren [Tue, 8 Oct 2019 23:11:27 +0000 (13:11 -1000)]
kernel.mk: add KCFLAGS to make kmods reproducible
Some kmods (gpio-hotplug, wireguard) store the build path in the
compiled files and therefore make it harder to rebuild the official
binaries. As the same "iremap" function is used as for other binaries,
the change is compatible with gcc7 and 8.
Tested with both gcc7 and gcc8 resulting in build path independent
reproducible builds.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Paul Spooren [Wed, 2 Oct 2019 07:15:44 +0000 (21:15 -1000)]
toolchain/gcc: switch to version 8 by default
Main motivation for this commit is the introduction of
`-ffile-prefix-map=` which alows reproducible build path.
Compile tested on Linux and macOS without errors on the following
targets:
* ath79
* imx6
* brcm2708
* brcm63xx
* ixp4xx
* ramips
* sunxi
* x86
Thanks to Andre for the iremap fixup.
Ref: https://reproducible-builds.org/docs/build-path/
Tested-by: Andre Heider <a.heider@gmail.com>
Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Paul Spooren <mail@aparcar.org>
[refactored into separate commit]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Paul Spooren [Wed, 9 Oct 2019 04:36:53 +0000 (06:36 +0200)]
config: remove unused GCC_VERSION_4_8 config symbols
Lets remove unused GCC_VERSION_4_8 symbol after the series of patches
which has switched to target gcc-8 by default.
Signed-off-by: Paul Spooren <mail@aparcar.org>
[refactored into separate commit]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Paul Spooren [Wed, 9 Oct 2019 04:41:00 +0000 (06:41 +0200)]
toolchain,build: prefer -ffile-prefix-map for gcc-8+
-ffile-prefix-map=OLD=NEW is an alias for both -fdebug-prefix-map and
-fmacro-prefix-map and is available since GCC 8.
Co-Developed-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Paul Spooren <mail@aparcar.org>
[refactored into separate commit]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Paul Spooren [Wed, 9 Oct 2019 04:33:06 +0000 (06:33 +0200)]
openssl: add gcc-8 -ffile-prefix-map filter
gcc-8 switch -ffile-prefix-map helps a lot with reproducible build paths
in the resulting binaries.
Ref: https://reproducible-builds.org/docs/build-path/
Signed-off-by: Paul Spooren <mail@aparcar.org>
[refactored into separate commit]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Martin Schiller [Mon, 7 Oct 2019 04:52:08 +0000 (06:52 +0200)]
target/imagebuilder: use multi-thread support for xz compression
This speeds up the packing of the imagebuilder a lot:
imagebuilder-T0.tar.xz real 0m25.199s user 2m45.967s sys 0m1.218s
imagebuilder-T1.tar.xz real 2m02.543s user 2m02.418s sys 0m1.653s
imagebuilder-T2.tar.xz real 1m03.684s user 1m59.931s sys 0m0.587s
imagebuilder-T3.tar.xz real 0m48.033s user 2m02.904s sys 0m0.637s
imagebuilder-T4.tar.xz real 0m38.963s user 2m15.521s sys 0m0.783s
imagebuilder-T5.tar.xz real 0m37.994s user 2m21.461s sys 0m0.919s
imagebuilder-T6.tar.xz real 0m39.524s user 2m48.115s sys 0m1.279s
imagebuilder-T7.tar.xz real 0m34.061s user 2m45.097s sys 0m1.174s
imagebuilder-T8.tar.xz real 0m27.286s user 2m55.449s sys 0m1.329s
imagebuilder-T9.tar.xz real 0m25.205s user 2m44.894s sys 0m1.208s
To keep the output reproducible in any case, we enforce a minimum amount
of 2 threads.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
[refactored into reusable NPROC var, more verbose commit message]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Mon, 7 Oct 2019 13:01:46 +0000 (15:01 +0200)]
libnl-tiny: move source code into separate Git repository
In order to make the source code usable and testable separately out of
buildroot.
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Josef Schlehofer [Thu, 3 Oct 2019 19:23:00 +0000 (21:23 +0200)]
tools/e2fsprogs: Update to version 1.45.4
Fixes CVE-2019-5094
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Felix Fietkau [Sat, 28 Sep 2019 13:57:58 +0000 (15:57 +0200)]
mac80211: add an improved moving average algorithm to minstrel
Improves rate control responsiveness and performance
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Koen Vandeputte [Tue, 8 Oct 2019 13:03:32 +0000 (15:03 +0200)]
kernel: bump 4.19 to 4.19.78
Refreshed all patches.
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Tue, 8 Oct 2019 13:02:52 +0000 (15:02 +0200)]
kernel: bump 4.14 to 4.14.148
Refreshed all patches.
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Tue, 8 Oct 2019 12:59:08 +0000 (14:59 +0200)]
kernel: bump 4.9 to 4.9.196
Refreshed all patches.
Compile-tested on: none
Runtime-tested on: none
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Mon, 7 Oct 2019 11:09:31 +0000 (13:09 +0200)]
kernel: bump 4.19 to 4.19.77
Refreshed all patches.
Remove upstreamed:
- 110-ARM-zynq-Use-memcpy_toio-instead-of-memcpy.patch
Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Mon, 7 Oct 2019 11:09:02 +0000 (13:09 +0200)]
kernel: bump 4.14 to 4.14.147
Refreshed all patches.
Altered patches:
- 403-mtd_fix_cfi_cmdset_0002_status_check.patch (ar71xx)
- 403-mtd_fix_cfi_cmdset_0002_status_check.patch (ath79)
Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Mon, 7 Oct 2019 10:53:17 +0000 (12:53 +0200)]
kernel: bump 4.9 to 4.9.195
Refreshed all patches.
Compile-tested on: none
Runtime-tested on: none
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Adrian Schmutzler [Wed, 4 Sep 2019 11:51:02 +0000 (13:51 +0200)]
ath79: improve DTS for TP-Link Archer D50 v1
This addresses several issues in the DTS file:
- add diag LED support
- remove unused node names
- fix whitespace issues
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Davide Fioravanti [Sun, 29 Sep 2019 18:52:37 +0000 (20:52 +0200)]
ramips: enable LED VCC for Asus RT-AC51U
Previously only the power LED was working.
With this patch all leds except 5GHz are working.
Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
[rephrased commit title, drop status property]
Signed-off-by: David Bauer <mail@david-bauer.net>
Adrian Schmutzler [Tue, 17 Sep 2019 12:22:34 +0000 (14:22 +0200)]
ath79: fix whitespace issues in DTS files
This is the result of grepping/searching for several common
whitespace issues like double empty lines, leading spaces, etc.
This patch fixes them for the ath79 target.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Sun, 22 Sep 2019 10:06:25 +0000 (12:06 +0200)]
treewide: remove kmod-usb-core from DEVICE_PACKAGES
This removes _all_ occurrences of kmod-usb-core from
DEVICE_PACKAGES and similar variables.
This package is pulled as dependency by one of the following
packages in any case:
- kmod-usb-chipidea
- kmod-usb-dwc2
- kmod-usb-ledtrig-usbport
- kmod-usb-ohci
- kmod-usb2
- kmod-usb2-pci
- kmod-usb3
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[remove kmod-usb-core from EnGenius ESR600]
Signed-off-by: David Bauer <mail@david-bauer.net>
Andre Heider [Mon, 23 Sep 2019 14:00:52 +0000 (16:00 +0200)]
sunxi: update kernel config
This is just a `make kernel_oldconfig` run without further changes.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Josef Schlehofer [Sun, 29 Sep 2019 09:21:29 +0000 (11:21 +0200)]
expat: Update to version 2.2.9
Fixes CVE-2019-15903
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
David Bauer [Fri, 4 Oct 2019 20:28:15 +0000 (22:28 +0200)]
mac80211: ath10k: fix latency issue for QCA988x
This backport fixes high latency (>100ms) on the WiFi link when using a
QCA988x Wave 1 radio. The ath10k-ct driver is not affected by this bug
from my testing, hence why it hasn't been discovered earlier.
Signed-off-by: David Bauer <mail@david-bauer.net>
Robert Marko [Wed, 16 May 2018 18:00:15 +0000 (20:00 +0200)]
kernel: add kmod-rtc-pcf2127
Add kernel module to support NXP PCF2127 and PCF2129 RTC clocks.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Hans Dedecker [Fri, 4 Oct 2019 18:38:46 +0000 (20:38 +0200)]
firewall: update to latest git HEAD
daed0cf utils: fix resource leak
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 4 Oct 2019 18:30:32 +0000 (20:30 +0200)]
odhcpd: update to latest git HEAD
e76ad06 netlink: fix potential infinite loops
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Koen Vandeputte [Fri, 4 Oct 2019 10:20:58 +0000 (12:20 +0200)]
kernel: bump 4.19 to 4.19.76
Refreshed all patches.
Altered patches:
- 403-mtd_fix_cfi_cmdset_0002_status_check.patch
Compile-tested on: ath79, cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Rafał Miłecki [Fri, 4 Oct 2019 13:46:13 +0000 (15:46 +0200)]
bcm53xx: fix serial console on Luxul XWC-2000
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 4 Oct 2019 09:40:06 +0000 (11:40 +0200)]
bcm53xx: fix sysupgrade for Luxul XWC-2000
Use a correct "compatible" value as in the upstream DTS file.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 4 Oct 2019 08:06:38 +0000 (10:06 +0200)]
bcm53xx: add pending patch adding Luxul XWC-2000 DTS file
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Hauke Mehrtens [Mon, 12 Aug 2019 19:43:08 +0000 (21:43 +0200)]
iw: Update to version 5.3
Wifi HE (ieee80211ax) parsing is currently only activated in the full
version because it increases the compressed size by 2.5KBytes.
This also activates link time optimization (LTO) again, the problem was
fixed upstream
This increases the uncompressed binary size of iw-tiny by about 1.7%
old:
34446 iw_5.0.1-1_mipsel_24kc.ipk
new:
35064 iw_5.3-1_mipsel_24kc.ipk
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Paul Spooren [Mon, 30 Sep 2019 05:31:52 +0000 (19:31 -1000)]
kernel-defaults: ensure SOURCE_DATE_EPOCH on /init
This is a follow up of
8cb13f4e6d which sets the right timestamp for the
/init file in initramfs. The previous patch doesn't cover it as the
files appear to come from a later step during compilation.
CC: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Paul Spooren <mail@aparcar.org>
Felix Fietkau [Wed, 2 Oct 2019 11:15:46 +0000 (13:15 +0200)]
grub2: fix a build regression on non-linux systems
Merge an upstream commit to correct a missing rename in generic code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 2 Oct 2019 10:53:09 +0000 (12:53 +0200)]
build: force disable stack validation during kernel build on non-linux systems
The check for libelf in the kernel build is not enough, because the code that
uses libelf for stack validation is completely non-portable, as it tries to
include asm/types.h and relies on kernel types in user space.
Until this is fixed properly, the only solution is to disable this on any non
Linux build host
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Tue, 1 Oct 2019 11:07:52 +0000 (13:07 +0200)]
mac80211: rt2x00: backport 'rt2x00: initialize last_reset'
https://patchwork.kernel.org/patch/
11161981/
--
From: Stanislaw Gruszka <sgruszka@redhat.com>
Subject: [PATCH] rt2x00: initialize last_reset
Initialize last_reset variable to INITIAL_JIFFIES, otherwise it is not
possible to test H/W reset for first 5 minutes of system run.
Fixes: e403fa31ed71 ("rt2x00: add restart hw")
Reported-and-tested-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
--
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hans Dedecker [Mon, 30 Sep 2019 19:49:47 +0000 (21:49 +0200)]
ethtool: bump to 5.3
76c4682 Release version 5.3.
3870efc ethtool: dump nested registers
7c06fa8 gitignore: ignore vim swapfiles and patches
49d1401 ethtool: igb: dump RR2DCDELAY register
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Jo-Philipp Wich [Mon, 30 Sep 2019 10:44:13 +0000 (12:44 +0200)]
iwinfo: update to latest Git HEAD
2a95086 nl80211: recognize SAE encrypted mesh
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Fri, 27 Sep 2019 14:26:11 +0000 (16:26 +0200)]
mt76: update to the latest version
0167bfa7b277 mt76: make mt76_rx_convert static
1d2acd5639d7 mt76: mt76x0: remove redundant chandef copy
496c78e4f0d3 mt76: mt76x0: remove unneeded return value on set channel
67973788f47f mt76: mt7615: introduce mt7615_txwi_to_txp utility routine
c7f82146ef96 mt76: mt7615: add support to read temperature from mcu
e07407ac1279 mt7603: fix build with CONFIG_KERNEL_DYNAMIC_DEBUG=y
8739f87e9aeb mt76: mt7615: fix control frame rx in monitor mode
9c5df3cb6a6d mt76: remove aggr_work field from struct mt76_wcid
0efbc5d1c271 mt76: use cancel_delayed_work_sync in mt76_rx_aggr_shutdown
0308d75f28e4 mt76: remove empty flag in mt76_txq_schedule_list
a20c20bbe88d mt76: usb: add lockdep_assert_held in __mt76u_vendor_request
b140512e73bf mt76: mt76x0e: make array mt76x0_chan_map static const, makes object smaller
63e815254075 mt76: mt7615: enable SCS by default
f3792b550fdb mt76: mt76x02: move mac_reset_counter in mt76x02_lib module
0355b7ae2b05 mt76: mt76x2: move mt76x02_mac_reset_counters in mt76x02_mac_start
c39488772d6b mt76: mt76x0u: reset counter starting the device
0b01aceeeff8 mt76: mt76x02u: move mt76x02u_mac_start in mt76x02-usb module
fbc59e64396e mt76: move queue debugfs entry to driver specific code
1118b5ea76be mt76: mt7615: add queue entry in debugfs
23e8aed3ac99 mt76: move aggr_stats array in mt76_dev
696c0fc5516a mt76: mt7615: collect aggregation stats
081926aa7b27 mt76: mt7603: collect aggregation stats
ea3ab68c7589 mt76: mt7615: fix mt7615 firmware path definitions
1ddcadb72e96 mt76: mt7603: remove q_rx field from struct mt7603_dev
202776352b0a mt76: report rx a-mpdu subframe status
b0429879eab2 mt76: rename mt76_driver_ops txwi_flags to drv_flags and include tx aligned4
a1d6891501a1 mt76: store current channel survey_state in struct mt76_dev
f34b1ae42cd0 mt76: track rx airtime for airtime fairness and survey
ee310307ad42 mt76: mt7603: track tx airtime for airtime fairness and survey
fdf0163fd101 mt76: mt7603: switch to a different counter for survey busy time
de118bb403d1 mt76: unify channel survey update code
3429cc7d36da mt76: mt76x02: move MT_CH_TIME_CFG init to mt76x02_mac_cc_reset
0e5050ee799c mt76: mt76x02: track approximate tx airtime for airtime fairness and survey
028071d9594c mt76: mt7615: report tx_time, bss_rx and busy time to mac80211
d91f7c1bcdf7 mt76: mt7615: fix survey channel busy time
2579122ba209 mt76: mt7615: introduce mt7615_mac_wtbl_update routine
81f2be0c459f mt76: mt7615: track tx/rx airtime for airtime fairness
e7199f944793 mt76: enable airtime fairness
8f22de061129 mt76: do not use devm API for led classdev
6f7d0f503d10 mt76: fix use-after-free bug in airtime fairness code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 12 Sep 2019 15:12:07 +0000 (17:12 +0200)]
iw: add patch to include local BSS rx time in survey information
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 28 Aug 2019 14:25:22 +0000 (16:25 +0200)]
mac80211: add patch to include local BSS rx time in survey information
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Paul Spooren [Sun, 18 Aug 2019 19:56:45 +0000 (09:56 -1000)]
build: create JSON files containing image info
The JSON info files contain details about the created firmware images
per device and are stored next to the created images.
The JSON files are stored as "$(IMAGE_PREFIX).json" and contain some
device/image meta data as well as a list of created firmware images.
An example of openwrt-ramips-rt305x-aztech_hw550-3g.json
{
"id": "aztech_hw550-3g",
"image_prefix": "openwrt-ramips-rt305x-aztech_hw550-3g",
"images": [
{
"name": "openwrt-ramips-rt305x-aztech_hw550-3g-squashfs-sysupgrade.bin",
"sha256": "
db2b34b0ec4a83d9bf612cf66fab0dc3722b191cb9bedf111e5627a4298baf20",
"type": "sysupgrade"
}
],
"metadata_version": 1,
"supported_devices": [
"aztech,hw550-3g",
"hw550-3g"
],
"target": "ramips/rt305x",
"titles": [
{
"model": "HW550-3G",
"vendor": "Aztech"
},
{
"model": "ALL0239-3G",
"vendor": "Allnet"
}
],
"version_commit": "r10920+123-
0cc87b3bac",
"version_number": "SNAPSHOT"
}
Signed-off-by: Paul Spooren <mail@aparcar.org>
Jeff Kletsky [Sat, 28 Sep 2019 17:39:58 +0000 (10:39 -0700)]
ath79: Restore GL.iNet GL-AR300M-Lite first-boot connectivity
The relationship between GMAC0 and GMAC1 and the kernel devices
eth0 and eth1 was reversed for many ath79 devices by commit
8dde11d521
ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi
The GL-AR300M-Lite is a single-port device, with the "LAN" port of the
GL-AR300M board unpopulated and its sole port now referenced as eth1,
as a result of commit
8dde11d521. The device was unreachable on
first boot or fresh config.
By changing ð1 (GMAC1) to an MFD, GMAC0 is able to associate with
the phy and is known by the kernel as "eth0".
Thanks to Chuanhong Guo for the suggestion of "simple-mfd"
Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
Jeff Kletsky [Sat, 28 Sep 2019 17:39:57 +0000 (10:39 -0700)]
ath79: Correct glinet, gl-ar300m-lite in 02_network
Previously, the board name for the GL-AR300M-Lite was incorrect
in 02_network, resulting in an unintended, fall-through condition
when initializing the network configuration.
While builds prior to commit
8dde11d521 (merged June 5, 2019)
ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi
functioned properly, the error was noted in resolving first-boot
connectivity issues related to the single-phy nature of the device
and the "swap" of eth0 and eth1 related to that commit.
Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
Adrian Schmutzler [Fri, 27 Sep 2019 11:23:30 +0000 (13:23 +0200)]
ramips: add label MAC address for Asus RT-AC85P
The label shows the MAC address of 2.4 GHz WiFi.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Wed, 18 Sep 2019 11:56:13 +0000 (13:56 +0200)]
treewide: fix hex2dec conversion for MAC address checksum offset
If chksum_offset is converted by $(($...)) at the beginning, the
check [ -n "$chksum_offset" ] will always return true, as the
conversion yields "0" for an empty argument, and [ -n "0" ] is
true.
With this patch, the variable is not converted before the check,
but only when it's used in dd.
No conversion is done for use in hexdump, as this can deal with
hex value offsets.
Fixes: b133e466b08e ("treewide: convert WiFi caldata size and offset to hexadecimal")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Wed, 24 Jul 2019 22:51:27 +0000 (00:51 +0200)]
treewide: replace backticks by $(...) in gen_*_img.sh scripts
This replaces deprecated backticks by more versatile $(...) syntax.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[decapitalized patch subject at submitter's request]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Adrian Schmutzler [Wed, 24 Jul 2019 22:50:26 +0000 (00:50 +0200)]
octeon: replace backticks by $(...)
This replaces deprecated backticks by more versatile $(...) syntax.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[decapitalized patch subject at submitter's request]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Adrian Schmutzler [Wed, 24 Jul 2019 22:47:13 +0000 (00:47 +0200)]
lantiq: replace backticks by $(...) and remove useless echo
This replaces deprecated backticks by more versatile $(...) syntax.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[decapitalized patch subject at submitter's request]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Adrian Schmutzler [Wed, 24 Jul 2019 22:45:49 +0000 (00:45 +0200)]
orion: replace backticks by $(...)
This replaces deprecated backticks by more versatile $(...) syntax.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[decapitalized patch subject at submitter's request]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Adrian Schmutzler [Wed, 24 Jul 2019 22:41:32 +0000 (00:41 +0200)]
mvebu: replace backticks by $(...)
This replaces deprecated backticks by more versatile $(...) syntax.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[decapitalized patch subject at submitter's request]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Eneas U de Queiroz [Wed, 25 Sep 2019 15:19:15 +0000 (12:19 -0300)]
ipq806x: remove unsupported hw-crypto qce driver
The following symbols, selected by the qce driver were removed:
CONFIG_CRYPTO_CBC
CONFIG_CRYPTO_CTR
CONFIG_CRYPTO_DES
CONFIG_CRYPTO_DEV_QCE
CONFIG_CRYPTO_ECB
CONFIG_CRYPTO_NULL
CONFIG_CRYPTO_SEQIV
CONFIG_CRYPTO_XTS
CONFIG_CRYPTO_GF128MUL was removed as well, since it is only needed by
some cipher modes (LRW, GCM), none of which are selected, and it is
packaged as a module.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Christian Lamparter [Sat, 28 Sep 2019 12:31:16 +0000 (14:31 +0200)]
apm821xx: fix fan control on highest step
This patch removes a typo (extra "0") so that the 'cpu-alert6'
step is triggered once the system reaches 85°C.
Note: Unless the WNDR4700 is placed in an hot oven, the
hardware-monitor will never reach this value.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Paul Spooren [Sat, 28 Sep 2019 21:12:21 +0000 (11:12 -1000)]
rules: allow arbitrary log destination
Add option BUILD_LOG_DIR to menuconfig to change log destination.
The mix-up of *DIR* and *FOLDER* is confusing however.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Adrian Schmutzler [Thu, 26 Sep 2019 12:44:23 +0000 (14:44 +0200)]
ramips: apply consistent device name/compatible to ZBT-WE1026-5G
All Zbtlink ramips devices except the ZBT-WE1026-5G include the
zbt-/ZBT- prefix in their model name.
This changes ZBT-WE1026-5G to also follow that scheme.
The patch moves some block to keep alphatical order.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Thu, 26 Sep 2019 12:44:22 +0000 (14:44 +0200)]
ramips: harmonize device vendor Zbtlink
Spelling of Zbtlink varies across image definitions and DTS files.
This patch uses Zbtlink consistently and also updates the model
in DTS files to contain the vendor in all cases.
This patch is cosmetical, as there should be no dependencies on
device model name in ramips anymore.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
DENG Qingfang [Thu, 26 Sep 2019 00:13:14 +0000 (08:13 +0800)]
iproute2: update to 5.3.0
Update iproute2 to 5.3.0
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Brandy Krueger [Thu, 26 Sep 2019 22:44:35 +0000 (00:44 +0200)]
wireguard: bump to 0.0.
20190913
Changes since 0.0.
20190702:
define conversion constants for ancient kernels
android: refactor and add incoming allow rules
enforce that unused bits of flags are zero
immediately rekey all peers after changing device private key
support running in OpenVZ environments
do not run bc on clean target
skip peers with invalid keys
account for upstream configuration maze changes
openbsd: fix alternate routing table syntax
account for android-4.9 backport of addr_gen_mode
don't fail down when using systemd-resolved
allow specifying kernel release
enforce named pipe ownership and use protected prefix
work around ubuntu breakage
support newer PaX
don't rewrite siphash when it's from compat
squelch warnings for stack limit on broken kernel configs
support rhel/centos 7.7
Signed-off-by: Brandy Krueger <krueger.brandy24@gmail.com>
DENG Qingfang [Thu, 26 Sep 2019 00:12:22 +0000 (08:12 +0800)]
ccache: update to 3.7.4
Update ccache to 3.7.4
Release notes:
https://ccache.dev/releasenotes.html#_ccache_3_7_4
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Rafał Miłecki [Thu, 26 Sep 2019 04:45:11 +0000 (06:45 +0200)]
brcm47xx: sysupgrade: fix device model detection
$(board_name) was providing content on "boardtype" (and optionally
"boardnum") NVRAM values. That function requires & expects more specific
and detailed model name extracted from the /proc/cpuinfo.
Fixes: f12a32630ff5 ("treewide: use the generic board_name function")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Adrian Schmutzler [Mon, 23 Sep 2019 13:34:34 +0000 (15:34 +0200)]
ath79: remove redundant ucidef_set_interfaces_* calls in 02_network
If already included in ucidef_add_switch, you do not have to
additionally set the interface mode in ucidef_set_interfaces_*
functions.
This patch removes/adjusts such redundant cases.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Sat, 31 Aug 2019 14:41:27 +0000 (16:41 +0200)]
ramips: merge cases in 02_network
This merges three cases with a single switch port.
6t@eth0 and 6@eth0 should be equivalent.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
David Bauer [Tue, 24 Sep 2019 23:52:14 +0000 (01:52 +0200)]
uboot-fritz4040: update to 2019-09-07
572ff7f fritzcreator: actually add checksum spacer
6edce1a fritzcreator: replace obscure padding generation with something more portable
2ff189f add ASUS RT-AC58U "easy install" factory u-boot shim
b91f9c2 readd spi-nand support
486ae53 improve cmd_sysupgrade
b0933f1 replace sstrip with strip
882e48a do not include generated files into git
0c5aa5f fix bugs in ipq40xx_cdp.c
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Sun, 22 Sep 2019 17:15:56 +0000 (19:15 +0200)]
ipq40xx: abort ar40xx probe on missing PHYs
The ar40xx driver currently panics in case no QCA807x PHY has been
successfully probed. This happens when the external PHY is still
in reset when probing the ar40xx switch driver.
Note that this patch does not fix the root cause, ar40xx_probe now
simply fails instead of causing a kernel panic due to a nullpointer
dereference.
Signed-off-by: David Bauer <mail@david-bauer.net>
Felix Fietkau [Wed, 25 Sep 2019 17:39:51 +0000 (19:39 +0200)]
kernel: fix issues with output routing in flow offload
Replace an old cleanup patch that never made it upstream with the proper
upstream fix. This patch was incompatible with the recent changes that
affected the way that the flow tuple dst entry was used.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 25 Sep 2019 14:45:05 +0000 (16:45 +0200)]
kernel: port 4.19 xt_FLOWOFFLOAD changes to 4.14
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 25 Sep 2019 12:09:45 +0000 (14:09 +0200)]
kernel: port another missing upstream change to xt_FLOWOFFLOAD on 4.19
Signed-off-by: Felix Fietkau <nbd@nbd.name>
leo chung [Fri, 20 Sep 2019 05:33:58 +0000 (13:33 +0800)]
build: fix xconfig target
`make xconfig` fails with following linking error of qconf binary:
g++ -lQt5Widgets -lQt5Gui -lQt5Core -o qconf qconf.o zconf.tab.o
/usr/bin/ld: qconf.o: in function ConfigList::metaObject() const': qconf.cc:(.text+0x3eb): undefined reference to QObjectData::dynamicMetaObject() const'
/usr/bin/ld: qconf.o: in function `ConfigList::qt_metacast(char const*)': link error.
which is caused by the wrong order of the linked objects/libraries so
this patch reorders the linker's arguments which makes the qconf compile
again.
Signed-off-by: leo chung <gewalalb@gmail.com>
[commit subject and message tweaks, whitespace fix]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Fri, 20 Sep 2019 12:54:56 +0000 (14:54 +0200)]
build: fix host menu config targets using ncurses
On a recent Gentoo Linux installation, invoking `make menuconfig`, `make
kernel_menuconfig` or `make kernel_nconfig` in the build system fails,
whereas for example `make menuconfig` in the kernel tree alone works as
expected.
This is happening because STAGING_PREFIX is not defined when kernel's
{menu,n}config target calls pkg-config from the toolchain/host and thus
pkg-config returns an empty value, and the fallback values in the kernel
config script are applied but those are off and the linking fails.
Solution is to use system's pkg-config for all ncurses based menu config
targets in order to provide proper compiler/linker flags.
Ref: FS#2423
Cc: Thomas Albers <thomas.gameiro@gmail.com>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Moritz Warning [Fri, 13 Sep 2019 15:52:34 +0000 (17:52 +0200)]
layerscape: split up DEVICE_TITLE definitions
DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT
Signed-off-by: Moritz Warning <moritzwarning@web.de>
Linus Walleij [Sun, 15 Sep 2019 19:54:05 +0000 (21:54 +0200)]
gemini: dir685: Restore graphics
One of the v4.19 patches had a bug, this is fixed upstream,
but in OpenWrt we can fix it by just fixing the bug in the
patch.
We also need to augment the config file to select the
CONFIG_DRM_FBDEV_EMULATION symbol.
This restores the display controller on the DIR-685 to
working state: penguin and graphics on the little screen
with default OpenWrt install.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Felix Fietkau [Wed, 25 Sep 2019 09:10:32 +0000 (11:10 +0200)]
kernel: update and fix xt_FLOWOFFLOAD target on 4.19
Merge upstream changes to nft_flow_offload.
Fixes offloading
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 25 Sep 2019 08:19:21 +0000 (10:19 +0200)]
tools/coreutils: install "touch"
Fixes error in setting SOURCE_DATE_EPOCH timestamp on files on rootfs prepare
on non-Linux systems
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Adrian Schmutzler [Sun, 22 Sep 2019 10:01:35 +0000 (12:01 +0200)]
ramips: initialize youhua, wr1200js WAN MAC addresses from flash
This patch changes wan MAC address setup for youhua,wr1200js
from retrieving it by calculation to reading it from flash.
This has been checked on-device.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
INAGAKI Hiroshi [Thu, 11 Jul 2019 05:41:08 +0000 (14:41 +0900)]
ramips: add support for I-O DATA WNPR2600G
I-O DATA WNPR2600G is a 2.4/5 GHz band 11ac router, based on MediaTek
MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 128 MiB
- Flash : SPI-NOR 16 MiB
- WLAN : 2.4/5 GHz 4T4R
- 2.4 GHz : MediaTek MT7615
- 5 GHz : MediaTek MT7615
- Ethernet : 10/100/1000 Mbps
- Switch : MT7530 (SoC)
- LED/keys : 4x/3x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J1: Vcc, RX, GND, TX from SoC side
- 57600n8
Flash instruction using factory image:
1. Boot WNPR2600G normaly
2. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
3. Select the OpenWrt factory image and click update ("更新") button
to perform firmware update
4. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
INAGAKI Hiroshi [Mon, 19 Aug 2019 12:38:24 +0000 (21:38 +0900)]
ramips: move "elx-header" to Makefile from mt7620.mk and mt7621.mk
I-O DATA WNPR2600G has an "elx-header", so move this definition to
generic makefile to use it from mt7621 subtarget.
This definition is also added to mt7621.mk in
f285e8634c57d28aa970b80c5c59e85485f35c7d, so remove it from mt7621.mk.
And added a line to cleanup used header file.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
INAGAKI Hiroshi [Mon, 19 Aug 2019 04:45:25 +0000 (13:45 +0900)]
ramips: replace MAC address configuration for I-O DATA WN-AC-GR devices
following I-O DATA devices have a MAC address as "wanaddr" for WAN
interface in u-boot-env:
- WN-AC1167GR
- WN-AC733GR3
I replaced MAC address configuration in these devices to omit
address calculation in 02_network.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
projects / openwrt / staging / jogo.git / log