openwrt/staging/blogic.git
15 years agodrm/radeon: set fb aperture sizes for framebuffer handoff.
Dave Airlie [Wed, 29 Jul 2009 07:07:38 +0000 (17:07 +1000)]
drm/radeon: set fb aperture sizes for framebuffer handoff.

This will allow efi/vesa to handoff to radeon.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/ttm: fix highuser vs dma32 confusion.
Dave Airlie [Wed, 29 Jul 2009 06:56:52 +0000 (16:56 +1000)]
drm/ttm: fix highuser vs dma32 confusion.

DMA32 and highmem are sort of exclusive.

Noticed by AndrewR on #radeon.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon: Fix size used for benchmarking BO copies.
Michel Dänzer [Sun, 19 Jul 2009 23:44:03 +0000 (01:44 +0200)]
drm/radeon: Fix size used for benchmarking BO copies.

The incorrect size caused benchmark results to be inflated by a factor of 4.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon: Add radeon.test parameter for running BO GPU copy tests.
Michel Dänzer [Tue, 21 Jul 2009 09:23:57 +0000 (11:23 +0200)]
drm/radeon: Add radeon.test parameter for running BO GPU copy tests.

If enabled, during initialization BO GTT->VRAM and VRAM->GTT GPU copies are
tested across the whole GTT aperture.

This has helped uncover the benchmark copy size bug and verify the maximum
aperture size supported by the AGP bridge in my PowerBook.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: allow interruptible waits for objects.
Dave Airlie [Fri, 24 Jul 2009 03:47:45 +0000 (13:47 +1000)]
drm/radeon/kms: allow interruptible waits for objects.

Blocking here isn't something the X server mouse appreciates,
avoid the block and let userspace retry the waits.

libdrm_radeon userspace library is also expecting EBUSY not ERESTART

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/ttm: powerpc: Fix Highmem cache flushing.
Thomas Hellstrom [Fri, 24 Jul 2009 08:22:36 +0000 (10:22 +0200)]
drm/ttm: powerpc: Fix Highmem cache flushing.

Temporarily maps highmem pages while flushing to get a valid virtual
address to flush.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agox86: Export kmap_atomic_prot() needed for TTM.
Thomas Hellstrom [Fri, 24 Jul 2009 07:57:33 +0000 (09:57 +0200)]
x86: Export kmap_atomic_prot() needed for TTM.

This functionality is needed to kmap_atomic() highmem pages that may
potentially have or are about to set up other mappings with
non-standard caching attributes.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/ttm: Fix ttm in-kernel copying of pages with non-standard caching attributes.
Thomas Hellstrom [Fri, 24 Jul 2009 07:57:34 +0000 (09:57 +0200)]
drm/ttm: Fix ttm in-kernel copying of pages with non-standard caching attributes.

For x86 this affected highmem pages only, since they were always kmapped
cache-coherent, and this is fixed using kmap_atomic_prot().

For other architectures that may not modify the linear kernel map we
resort to vmap() for now, since kmap_atomic_prot() generally uses the
linear kernel map for lowmem pages. This of course comes with a
performance impact and should be optimized when possible.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/ttm: Fix an oops and sync object leak.
Thomas Hellstrom [Tue, 21 Jul 2009 15:45:13 +0000 (17:45 +0200)]
drm/ttm: Fix an oops and sync object leak.

The code was potentially dereferencig a NULL sync object pointer.
At the same time a sync object reference was potentially leaked.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: vram sizing on certain r100 chips needs workaround.
Dave Airlie [Tue, 21 Jul 2009 10:39:30 +0000 (20:39 +1000)]
drm/radeon/kms: vram sizing on certain r100 chips needs workaround.

If an rn50/r100/m6/m7 GPU has < 64MB RAM, i.e. 8/16/32, the
aperture used to calculate the MC_FB_LOCATION needs to be worked
out from the CONFIG_APER_SIZE register, and not the actual vram size.

TTM VRAM size was also being initialised wrong, use actual vram size
to initialise it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon: Pay more attention to object placement requested by userspace.
Michel Dänzer [Tue, 28 Jul 2009 10:30:57 +0000 (12:30 +0200)]
drm/radeon: Pay more attention to object placement requested by userspace.

Previously we were basically always setting the GTT and VRAM flags regardless of
what userspace requested.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon: Fall back to evicting BOs with memcpy if necessary.
Michel Dänzer [Tue, 28 Jul 2009 10:30:56 +0000 (12:30 +0200)]
drm/radeon: Fall back to evicting BOs with memcpy if necessary.

Otherwise if there's no GTT space we would fail the eviction, leading to
cascaded failure.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon: Don't unreserve twice on failure to validate.
Michel Dänzer [Tue, 28 Jul 2009 10:30:55 +0000 (12:30 +0200)]
drm/radeon: Don't unreserve twice on failure to validate.

This is done later in radeon_object_list_unvalidate(). Doing it twice triggers
a BUG in TTM, rendering X on KMS unusable until reboot.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: fix bandwidth computation on avivo hardware
Jerome Glisse [Mon, 13 Jul 2009 19:04:08 +0000 (21:04 +0200)]
drm/radeon/kms: fix bandwidth computation on avivo hardware

Fix bandwidth computation and crtc priority in memory controller
so that crtc memory request are fullfill in time to avoid display
artifact.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: add initial colortiling support.
Dave Airlie [Tue, 23 Jun 2009 23:48:08 +0000 (09:48 +1000)]
drm/radeon/kms: add initial colortiling support.

This adds new set/get tiling interfaces where the pitch
and macro/micro tiling enables can be set. Along with
a flag to decide if this object should have a surface when mapped.

The only thing we need to allocate with a mapped surface should be
the frontbuffer. Note rotate scanout shouldn't require one, and
back/depth shouldn't either, though mesa needs some fixes.

It fixes the TTM interfaces along Thomas's suggestions, and I've tested
the surface stealing code with two X servers and not seen any lockdep issues.

I've stopped tiling the fbcon frontbuffer, as I don't see there being
any advantage other than testing, I've left the testing commands in there,
just flip the fb_tiled to true in radeon_fb.c

Open: Can we integrate endian swapping in with this?

Future features:
texture tiling - need to relocate texture registers TXOFFSET* with tiling info.

This also merges Michel's cleanup surfaces regs at init time patch
even though it makes sense on its own, this patch really relies on it.

Some PowerMac firmwares set up a tiling surface at the beginning of VRAM
which messes us up otherwise.
that patch is:
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: fix hotspot handling on pre-avivo chips
Alex Deucher [Mon, 13 Jul 2009 17:51:03 +0000 (13:51 -0400)]
drm/radeon/kms: fix hotspot handling on pre-avivo chips

Need to adjust CUR_OFFSET for yorigin

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: enable frac fb divs on rs600/rs690/rs740
Alex Deucher [Mon, 13 Jul 2009 15:09:56 +0000 (11:09 -0400)]
drm/radeon/kms: enable frac fb divs on rs600/rs690/rs740

Allows us to hit dot clocks much closer, especially on
chips with non-27 Mhz reference clocks like most IGP chips.
This fixes most flickering and blanking problems with
non-exact dot clocks on these chips.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: add PLL flag to prefer frequencies <= the target freq
Alex Deucher [Mon, 13 Jul 2009 15:08:18 +0000 (11:08 -0400)]
drm/radeon/kms: add PLL flag to prefer frequencies <= the target freq

This is needed when using fractional feedback dividers on some IGP
chips.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: block RN50 from using 3D engine.
Dave Airlie [Mon, 13 Jul 2009 16:02:32 +0000 (02:02 +1000)]
drm/radeon/kms: block RN50 from using 3D engine.

RN50/ES1000 is a cut-down rv100 chip used in the server market.
The 3D engine on these is either not there or unverified so refuse
any attempt to configure registers on it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: fix VRAM sizing like DDX does it.
Dave Airlie [Fri, 10 Jul 2009 18:44:47 +0000 (04:44 +1000)]
drm/radeon/kms: fix VRAM sizing like DDX does it.

Doing this like the DDX seems like the most sure fire way to avoid
having to reinvent it slowly and painfully. At the moment we keep
getting things wrong with aper vs vram, so we know the DDX does it right.

booted on PCI r100, PCIE rv370, IGP rs400.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/ttm/radeon: add dma32 support.
Dave Airlie [Fri, 10 Jul 2009 12:36:26 +0000 (22:36 +1000)]
drm/ttm/radeon: add dma32 support.

This add support for using dma32 memory on gpus that really need it.

Currently IGPs are left without DMA32 but we might need to change
that unless we can fix rs690.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon: Endianness fixes for radeondrmfb.
Michel Dänzer [Tue, 23 Jun 2009 14:12:55 +0000 (00:12 +1000)]
drm/radeon: Endianness fixes for radeondrmfb.

For now handle it via r/g/b offsets and disallow 16 bpp modes on big endian
machines.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: don't swap PCIEGART PTEs in VRAM.
Dave Airlie [Thu, 9 Jul 2009 23:33:00 +0000 (09:33 +1000)]
drm/radeon/kms: don't swap PCIEGART PTEs in VRAM.

On powerpc, since we aren't using any hw swappers, this will
get flipped around by default in hw.

tested on a G5 + rv515.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: drop zero length CS indirect buffers.
Dave Airlie [Tue, 30 Jun 2009 01:47:14 +0000 (11:47 +1000)]
drm/radeon/kms: drop zero length CS indirect buffers.

If userspace sends a zero length IB, it really shouldn't have bothered
so EINVAL it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: fix vram vs aper size check.
Dave Airlie [Thu, 9 Jul 2009 06:01:42 +0000 (16:01 +1000)]
drm/radeon/kms: fix vram vs aper size check.

Fix this to be correct like the DDX code, looks like a typo
on transfer to the kernel.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: get lvds info for DIG LVTMA and UNIPHY encoders
Alex Deucher [Wed, 8 Jul 2009 20:17:23 +0000 (16:17 -0400)]
drm/radeon/kms: get lvds info for DIG LVTMA and UNIPHY encoders

Noticed by Rafał Miłecki on dri-devel.  On r6xx/r7xx hardware, laptop
panels can be driven by KLDSCP_LVTMA or UNIPHY.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: fix quirk for MSI laptop
Alex Deucher [Wed, 8 Jul 2009 20:15:30 +0000 (16:15 -0400)]
drm/radeon/kms: fix quirk for MSI laptop

The line mux for the connector in the bios tables
is used for enumerating drm connectors.  Since
this laptop has a quirk where the same line much is
listed for both VGA and LVDS, the connectors get
combined.  Setting the line mux on LVDS to an unused
value prevents both encoders from being combined into
the same connector.  This should fix bko bug 13720.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agottm: Fix caching mode selection.
Thomas Hellstrom [Wed, 24 Jun 2009 17:57:34 +0000 (19:57 +0200)]
ttm: Fix caching mode selection.

A bug caused a new caching state to be selected on each buffer object
validation regardless of the current caching state.
Moreover, a caching state could be selected that wasn't supported by
the memory type.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agottm: Make messages more readable.
Thomas Hellstrom [Wed, 24 Jun 2009 17:57:35 +0000 (19:57 +0200)]
ttm: Make messages more readable.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon: fix support for vline relocations.
Dave Airlie [Mon, 29 Jun 2009 01:21:25 +0000 (11:21 +1000)]
drm/radeon: fix support for vline relocations.

Userspace sends us a special relocation type to sync video/exa
to vlines to avoid tearing, this deals with the relocation
in the kernel, it picks the correct crtc and avoids issues
where crtcs are disabled.

This version also parses the wait until to make sure it isn't
trying to do anything evil.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: respect TOM on rs100->rs480 IGP variants.
Dave Airlie [Thu, 9 Jul 2009 05:04:18 +0000 (15:04 +1000)]
drm/radeon/kms: respect TOM on rs100->rs480 IGP variants.

Normally we are free to place VRAM where we want in the GPUs
memory address space, however on IGP chips the VRAM is actual RAM,
and no special translation or aperture is used inside the GPU MC.

So when you move the VRAM aperture away from the TOM register,
you actually move it into main memory and can trash things quite badly.

This commit makes the code respect the TOM location for MC_FB_LOCATION.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: set crtc and cursor offsets correctly on legacy chips.
Dave Airlie [Thu, 9 Jul 2009 05:04:19 +0000 (15:04 +1000)]
drm/radeon/kms: set crtc and cursor offsets correctly on legacy chips.

The crtc and cursor offsets on the legacy chips are offset from
DISPLAY_BASE_ADDR. The code worked if display base addr was at 0,
but otherwise falls to pieces.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: remove IB flushing trick.
Dave Airlie [Mon, 29 Jun 2009 08:29:13 +0000 (18:29 +1000)]
drm/radeon/kms: remove IB flushing trick.

If there is a problem then this is hiding it, we shouldn't
ever need to flush the IB. Either the buffers are:

WB - caching just works.
WC - no need to do explicit flush, the MB + readback will do it

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: mmio base/size should be resource_size_t.
Dave Airlie [Mon, 29 Jun 2009 08:29:12 +0000 (18:29 +1000)]
drm/radeon/kms: mmio base/size should be resource_size_t.

Unsigned long is incorrect for 64-bit resources on 32-bit hw.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agodrm/radeon/kms: fix some GART table entry bugs.
Dave Airlie [Mon, 29 Jun 2009 08:29:11 +0000 (18:29 +1000)]
drm/radeon/kms: fix some GART table entry bugs.

1. rv370 can accept 40-bit addresses - also at 24-bit shift not 4 bits
2. rs480 table can be in 40-bit space. - 4 bit shift for top 8 bits
3. rs480 table entries can be in 40-bit space.

Signed-off-by: Dave Airlie <airlied@redhat.com>
15 years agox86: don't clear nodes_states[N_NORMAL_MEMORY] when numa is not compiled in
Yinghai Lu [Wed, 8 Jul 2009 16:50:19 +0000 (09:50 -0700)]
x86: don't clear nodes_states[N_NORMAL_MEMORY] when numa is not compiled in

Alex found that specjbb2005 still can not run with hugepages on an
x86-64 machine.  This only happens when numa is not compiled in.

The root cause: node_set_state will not set it back for us in that case,
so don't clear that when numa is not select in config

[ v2: use node_clear_state instead ]
Reported-and-Tested-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoRemove multiple KERN_ prefixes from printk formats
Joe Perches [Mon, 6 Jul 2009 20:05:40 +0000 (13:05 -0700)]
Remove multiple KERN_ prefixes from printk formats

Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up
handling of log-levels and newlines") changed printk semantics.  printk
lines with multiple KERN_<level> prefixes are no longer emitted as
before the patch.

<level> is now included in the output on each additional use.

Remove all uses of multiple KERN_<level>s in formats.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agotty: maintainers data was edited wrongly by someone
Alan Cox [Tue, 7 Jul 2009 15:39:54 +0000 (16:39 +0100)]
tty: maintainers data was edited wrongly by someone

Move tty entries to tty not trivial. Noted by David Brownell.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agopty: Rework the pty layer to use the normal buffering logic
Alan Cox [Tue, 7 Jul 2009 15:39:41 +0000 (16:39 +0100)]
pty: Rework the pty layer to use the normal buffering logic

This fixes the ppp problems and various other issues with call locking
caused by one side of a pty called in one locking context trying to match
another with differing rules on the other side. We also get a big slack
space to work with that means we can bury the flow control deadlock case
for any conceivable real world situation.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Wed, 8 Jul 2009 16:36:46 +0000 (09:36 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Powernow-k8: support family 0xf with 2 low p-states
  [CPUFREQ] fix (utter) cpufreq_add_dev mess
  [CPUFREQ] Cleanup locking in conservative governor
  [CPUFREQ] Cleanup locking in ondemand governor
  [CPUFREQ] Mark policy_rwsem as going static in cpufreq.c wont be exported
  [CPUFREQ] Eliminate the recent lockdep warnings in cpufreq

15 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Wed, 8 Jul 2009 16:35:50 +0000 (09:35 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-quota-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-quota-2.6:
  quota: Fix possible deadlock during parallel quotaon and quotaoff

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Wed, 8 Jul 2009 16:35:22 +0000 (09:35 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/rafael/suspend-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Clear -EAGAIN in dpm_prepare
  x86: Fix resume from suspend when CONFIG_CC_STACKPROTECTOR

15 years agointel-iommu: Fix intel_iommu_unmap_range() with size 0
Sheng Yang [Wed, 8 Jul 2009 10:52:52 +0000 (11:52 +0100)]
intel-iommu: Fix intel_iommu_unmap_range() with size 0

After some API change, intel_iommu_unmap_range() introduced a assumption that
parameter size != 0, otherwise the dma_pte_clean_range() would have a
overflowed argument. But the user like KVM don't have this assumption before,
then some BUG() triggered.

Fix it by ignoring size = 0.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoFree struct device in fw_dev_release()
Catalin Marinas [Wed, 8 Jul 2009 10:17:40 +0000 (11:17 +0100)]
Free struct device in fw_dev_release()

The f_dev in _request_firmware() is allocated via the fw_setup_device()
and fw_register_device() calls and its class set to firmware_class (the
class release function is fw_dev_release).

Commit 6acf70f078ca replaced the kfree(dev) in fw_dev_release() with a
put_device() call but my understanding is that the release function is
called via put_device -> kobject_put -> kref_put -> koject_release etc.
and it should call kfree since it's the last to see this device
structure alive.

Because of that, the _request_firmware() function on its -ENOENT error
path only calls device_unregister(f_dev) which would eventually call
fw_dev_release() but there is no kfree (the subsequent put_device call
would just make the kref negative).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoFree the memory allocated by memdup_user() in fs/sysfs/bin.c
Catalin Marinas [Wed, 8 Jul 2009 10:17:34 +0000 (11:17 +0100)]
Free the memory allocated by memdup_user() in fs/sysfs/bin.c

Commit 1c8542c7bb replaced kmalloc() with memdup_user() in the write()
function but also dropped the kfree(temp). The memdup_user() function
allocates memory which is never freed.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Parag Warudkar <parag.warudkar@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Wed, 8 Jul 2009 16:32:41 +0000 (09:32 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: gpio_mouse - use standard driver registration method
  Input: mark serio and i8042 as suspended when hibernating too
  Input: add support for generic GPIO-based matrix keypad
  Input: arrange keyboards alphabetically
  Input: gpio-keys - avoid possibility of sleeping in timer function
  Input: gpio-keys - revert 'change timer to workqueue'
  Input: dm355evm_keys - fix kconfig symbol names
  Input: wacom - add DTF720a support and fix rotation on Intuos3
  Input: i8042 - more reset quirks for MSI Wind-clone netbooks

15 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Wed, 8 Jul 2009 16:32:20 +0000 (09:32 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Don't use alloc_bootmem() in init_IRQ() path
  powerpc: Fix spin_event_timeout() to be robust over context switches
  powerpc: Use pr_devel() in do_dcache_icache_coherency()
  powerpc/cell: Use pr_devel() in axon_msi.c
  powerpc: Use pr_devel() in arch/powerpc/mm/gup.c
  powerpc: Cleanup & use pr_devel() in arch/powerpc/mm/slb.c
  powerpc/perf_counter: Remove duplicated #include
  powerpc: Use pr_devel() in arch/powerpc/mm/mmu_context_nohash.c
  powerpc/pseries: Use pr_devel() in xics.c
  powerpc: Remove unnecessary semicolons
  powerpc/pseries: Use pr_devel() in pseries LPAR HPTE routines
  powerpc/44x: Fix build error with -Werror for Warp platform
  powerpc/4xx: Have Warp take advantage of GPIO LEDs default-state = keep
  powerpc/44x: Update Warp defconfig

15 years agoheaders: mnt_namespace.h redux
Alexey Dobriyan [Tue, 7 Jul 2009 21:54:37 +0000 (01:54 +0400)]
headers: mnt_namespace.h redux

Fix various silly problems wrt mnt_namespace.h:

 - exit_mnt_ns() isn't used, remove it
 - done that, sched.h and nsproxy.h inclusions aren't needed
 - mount.h inclusion was need for vfsmount_lock, but no longer
 - remove mnt_namespace.h inclusion from files which don't use anything
   from mnt_namespace.h

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...
Linus Torvalds [Wed, 8 Jul 2009 16:24:01 +0000 (09:24 -0700)]
Merge branch 'sh/for-2.6.31' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  serial: sh-sci: fix sci interrupt handler
  video: hitfb: Move over to dev_pm_ops.
  video: hitfb: Convert to framebuffer_alloc().
  video: sh_mobile_lcdcfb: Convert to framebuffer_alloc().
  sh: add r8a66597 usb0 host to the se7724 board
  usb: allow sh7724 to enable on-chip r8a66597
  sh-sci: update receive error handling for muxed irqs
  sh: define PERF_COUNTER_INDEX_OFFSET.

15 years agoRevert "fb: Initialize fb_info mutexes in framebuffer_alloc()"
Linus Torvalds [Wed, 8 Jul 2009 16:20:11 +0000 (09:20 -0700)]
Revert "fb: Initialize fb_info mutexes in framebuffer_alloc()"

This reverts commit 4148df9b0f38bdd362dd91d52076926c11cbe5a9.

Let's hope that the mm_lock initialization is now correct with all
drivers, following Krzysztof's patches.

Requested-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agomatroxfb: fix regression with uninitalized fb_info->mm_lock mutex (second head)
Krzysztof Helt [Tue, 7 Jul 2009 20:34:13 +0000 (22:34 +0200)]
matroxfb: fix regression with uninitalized fb_info->mm_lock mutex (second head)

Remove redundant locking by the mm_lock mutex before a second head of
matrox framebuffer is registered.

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf059f " fbdev: add mutex for fb_mmap
locking"

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agomatroxfb: fix regression with uninitalized fb_info->mm_lock mutex
Krzysztof Helt [Tue, 7 Jul 2009 20:06:48 +0000 (22:06 +0200)]
matroxfb: fix regression with uninitalized fb_info->mm_lock mutex

Remove redundant call to the matroxfb_update_fix() before matrox
frambuffer is registered.

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf059f " fbdev: add mutex for fb_mmap
locking"

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agow100fb: fix regression with uninitalized fb_info->mm_lock mutex
Krzysztof Helt [Tue, 7 Jul 2009 17:24:54 +0000 (19:24 +0200)]
w100fb: fix regression with uninitalized fb_info->mm_lock mutex

Remove redundant call to the w100fb_set_par() before w100 frambuffer is
registered.

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf059f " fbdev: add mutex for fb_mmap
locking"

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoatafb: fix regression with uninitalized fb_info->mm_lock mutex
Krzysztof Helt [Tue, 7 Jul 2009 17:15:16 +0000 (19:15 +0200)]
atafb: fix regression with uninitalized fb_info->mm_lock mutex

Remove redundant locking of the fb_info->mm_lock mutex before the
frambuffer is registered.

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf059f " fbdev: add mutex for fb_mmap
locking"

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoi810fb: fix regression with uninitalized fb_info->mm_lock mutex
Krzysztof Helt [Tue, 7 Jul 2009 17:07:57 +0000 (19:07 +0200)]
i810fb: fix regression with uninitalized fb_info->mm_lock mutex

Remove redundant call to the encode_fix() before i810 frambuffer is
registered.

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf059f " fbdev: add mutex for fb_mmap
locking"

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoelfcore.h : Fix UML build breakage
Parag Warudkar [Wed, 8 Jul 2009 15:46:02 +0000 (11:46 -0400)]
elfcore.h : Fix UML build breakage

Commit a65e7bfcd74e4c0939f235d2bf9f48ddb3a57991 broke the UML build with
the following error -

  In file included from fs/proc/kcore.c:17:
  include/linux/elfcore.h: In function 'elf_core_copy_task_regs':
  include/linux/elfcore.h:129: error: implicit declaration of function 'task_pt_regs'

Fix this by restoring the previous behavior of returning 0 for all arches
like UML that don't define task_pt_regs.

Signed-off-by: Parag Warudkar <parag.lkml@gmail.com>
Acked-by: Amerigo Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoPM: Clear -EAGAIN in dpm_prepare
Sebastian Ott [Wed, 8 Jul 2009 11:26:05 +0000 (13:26 +0200)]
PM: Clear -EAGAIN in dpm_prepare

When the last device in the dpm list is unregistered directly after its
prepare() callback returned with -EAGAIN, the return code is passed to
the calling function, resulting in a suspend failure. Prevent this by
clearing the return code after -EAGAIN.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
15 years agox86: Fix resume from suspend when CONFIG_CC_STACKPROTECTOR
Peter Chubb [Wed, 8 Jul 2009 11:20:13 +0000 (13:20 +0200)]
x86: Fix resume from suspend when CONFIG_CC_STACKPROTECTOR

Patch 08687aec71bc9134fe336e561f6did877bacf74fc0a (x86: unify
power/cpu_(32|64).c)  renamed cpu_32.c to cpu.c, but did not update
the special compilation flags for the file for the new name.

This patch fixes the compilation flags, and therefore fixes resume
from suspend on my Acer Aspire One.

[rjw: The regression from 2.6.30 fixed by this patch is tracked as
 http://bugzilla.kernel.org/show_bug.cgi?id=13661]

Signed-off-by: Peter Chubb <peterc@nicta.com.au>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
15 years agoInput: gpio_mouse - use standard driver registration method
Saeed Bishara [Wed, 8 Jul 2009 05:11:52 +0000 (22:11 -0700)]
Input: gpio_mouse - use standard driver registration method

This patch is needed when the gpio's became available only at late
stages, for example, when using i2c gpio expander.

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
15 years agoInput: mark serio and i8042 as suspended when hibernating too
Thadeu Lima de Souza Cascardo [Wed, 8 Jul 2009 05:10:02 +0000 (22:10 -0700)]
Input: mark serio and i8042 as suspended when hibernating too

Serio ports are not being restarted any longer because resume operations
after hibernate do nothing, since the device has not been marked as
suspended. This happens because suspend is only considering the SUSPEND
event but not the FREEZE event.

Note that this driver has still to migrate to dev_pm_ops, but this fixes
this particular bug now.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
15 years agopowerpc: Don't use alloc_bootmem() in init_IRQ() path
Anton Vorontsov [Wed, 1 Jul 2009 10:59:57 +0000 (10:59 +0000)]
powerpc: Don't use alloc_bootmem() in init_IRQ() path

This patch fixes various badnesses like this for all interrupt
controllers:

------------[ cut here ]------------
Badness at c04db9dc [verbose debug info unavailable]
NIP: c04db9dc LR: c04db9ac CTR: 00000000
REGS: c053de30 TRAP: 0700   Not tainted  (2.6.31-rc1-00432-ge69b2b5-dirty)
MSR: 00021000 <ME,CE>  CR: 22020084  XER: 00000000
TASK = c0500480[0] 'swapper' THREAD: c053c000
GPR00: 00000001 c053dee0 c0500480 00000000 00000050 00000020 3fffffff 00000000
GPR08: 00000001 c0540000 e0080080 00000000 22000084 64183600 3ff8f800 00000000
GPR16: 841b0240 449a0303 00000000 00000000 00000000 00000000 00000000 c04f5bf4
GPR24: 00000000 00000000 00000000 00000050 00000020 00000000 3fffffff 00000050
NIP [c04db9dc] alloc_arch_preferred_bootmem+0x48/0x74
LR [c04db9ac] alloc_arch_preferred_bootmem+0x18/0x74
Call Trace:
[c053dee0] [c000a5a4] __of_address_to_resource+0x44/0xd0 (unreliable)
[c053def0] [c04dba58] ___alloc_bootmem_nopanic+0x50/0x108
[c053df20] [c04dbb28] ___alloc_bootmem+0x18/0x50
[c053df30] [c04d5de0] qe_ic_init+0x5c/0x1b0
[c053df70] [c04d77b0] mpc85xx_mds_pic_init+0xb8/0x10c
[c053dfb0] [c04cf374] init_IRQ+0x28/0x3c

p.s. commit 85355bb272db31a3f2dd99d547eef794805e1319 ("powerpc: Fix
mpic alloc warning") missed some alloc_bootmem() instances, this is
now fixed.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: Fix spin_event_timeout() to be robust over context switches
Grant Likely [Mon, 29 Jun 2009 13:40:51 +0000 (13:40 +0000)]
powerpc: Fix spin_event_timeout() to be robust over context switches

Current implementation of spin_event_timeout can be interrupted by an
IRQ or context switch after testing the condition, but before checking
the timeout.  This can cause the loop to report a timeout when the
condition actually became true in the middle.

This patch adds one final check of the condition upon exit of the loop
if the last test of the condition was still false.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: Use pr_devel() in do_dcache_icache_coherency()
Michael Ellerman [Wed, 17 Jun 2009 18:13:52 +0000 (18:13 +0000)]
powerpc: Use pr_devel() in do_dcache_icache_coherency()

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   2036     368       8    2412     96c arch/powerpc/mm/pgtable.o

size after:
   text    data     bss     dec     hex filename
   1677     248       8    1933     78d arch/powerpc/mm/pgtable.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/cell: Use pr_devel() in axon_msi.c
Michael Ellerman [Wed, 17 Jun 2009 18:13:53 +0000 (18:13 +0000)]
powerpc/cell: Use pr_devel() in axon_msi.c

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   7083    1616       0    8699    21fb arch/powerpc/../axon_msi.o

size after:
   text    data     bss     dec     hex filename
   5772    1208       0    6980    1b44 arch/powerpc/../axon_msi.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: Use pr_devel() in arch/powerpc/mm/gup.c
Michael Ellerman [Wed, 17 Jun 2009 18:13:51 +0000 (18:13 +0000)]
powerpc: Use pr_devel() in arch/powerpc/mm/gup.c

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   3252     384       0    3636     e34 arch/powerpc/mm/gup.o

size after:
   text    data     bss     dec     hex filename
   2576      96       0    2672     a70 arch/powerpc/mm/gup.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: Cleanup & use pr_devel() in arch/powerpc/mm/slb.c
Michael Ellerman [Wed, 17 Jun 2009 18:13:51 +0000 (18:13 +0000)]
powerpc: Cleanup & use pr_devel() in arch/powerpc/mm/slb.c

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   3261     416       4    3681     e61 arch/powerpc/mm/slb.o

size after:
   text    data     bss     dec     hex filename
   2861     248       4    3113     c29 arch/powerpc/mm/slb.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/perf_counter: Remove duplicated #include
Huang Weiyi [Sat, 20 Jun 2009 13:37:00 +0000 (13:37 +0000)]
powerpc/perf_counter: Remove duplicated #include

Remove duplicated #include('s) in
  arch/powerpc/kernel/mpc7450-pmu.c
  arch/powerpc/kernel/ppc970-pmu.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: Use pr_devel() in arch/powerpc/mm/mmu_context_nohash.c
Michael Ellerman [Wed, 17 Jun 2009 18:13:54 +0000 (18:13 +0000)]
powerpc: Use pr_devel() in arch/powerpc/mm/mmu_context_nohash.c

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   1508      48      28    1584     630 powerpc/mm/mmu_context_nohash.o

size after:
   text    data     bss     dec     hex filename
   1088       0      28    1116     45c powerpc/mm/mmu_context_nohash.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/pseries: Use pr_devel() in xics.c
Michael Ellerman [Wed, 17 Jun 2009 18:13:53 +0000 (18:13 +0000)]
powerpc/pseries: Use pr_devel() in xics.c

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   7720    5488     296   13504    34c0 platforms/pseries/xics.o

size after:
   text    data     bss     dec     hex filename
   7535    5456     296   13287    33e7 platforms/pseries/xics.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc: Remove unnecessary semicolons
Joe Perches [Sun, 28 Jun 2009 06:26:10 +0000 (06:26 +0000)]
powerpc: Remove unnecessary semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agopowerpc/pseries: Use pr_devel() in pseries LPAR HPTE routines
Michael Ellerman [Wed, 17 Jun 2009 18:13:50 +0000 (18:13 +0000)]
powerpc/pseries: Use pr_devel() in pseries LPAR HPTE routines

pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

In particular, pSeries_lpar_hpte_insert() goes from 185 instructions
to 77 instructions as a result of this patch. Luckily that code
isn't called very often ...

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   7284    1552     296    9132    23ac platforms/pseries/lpar.o

size after:
   text    data     bss     dec     hex filename
   5806    1096     296    7198    1c1e platforms/pseries/lpar.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
15 years agoMerge commit 'jwb/merge' into merge
Benjamin Herrenschmidt [Wed, 8 Jul 2009 03:49:38 +0000 (13:49 +1000)]
Merge commit 'jwb/merge' into merge

15 years agoquota: Fix possible deadlock during parallel quotaon and quotaoff
Jiaying Zhang [Tue, 7 Jul 2009 16:15:21 +0000 (18:15 +0200)]
quota: Fix possible deadlock during parallel quotaon and quotaoff

The following test script triggers a deadlock on ext2 filesystem:
while true; do quotaon /dev/hda >&/dev/null; usleep $RANDOM; done &
while true; do quotaoff /dev/hda >&/dev/null; usleep $RANDOM; done &

I found there is a potential deadlock between quotaon and quotaoff (or
quotasync). Basically, all of quotactl operations need to be protected by
dqonoff_mutex. vfs_quota_off and vfs_quota_sync also call sb->s_op->quota_write
that needs to grab the i_mutex of the quota file.  But in vfs_quota_on_inode
(called from quotaon operation), the current code tries to grab  the i_mutex of
the quota file first before getting quonoff_mutex.

Reverse the order in which we take locks in vfs_quota_on_inode().

Jan Kara: Changed changelog to be more readable, made lockdep happy with
  I_MUTEX_QUOTA.

Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
15 years agoserial: sh-sci: fix sci interrupt handler
SUGIOKA Toshinobu [Tue, 7 Jul 2009 05:32:07 +0000 (05:32 +0000)]
serial: sh-sci: fix sci interrupt handler

Fix up the error bit handling on SCI ports.

Signed-off-by: SUGIOKA Toshinobu <sugioka@itonet.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux...
Paul Mundt [Tue, 7 Jul 2009 02:55:05 +0000 (11:55 +0900)]
Merge branch 'master' of git://git./linux/kernel/git/torvalds/linux-2.6 into sh/for-2.6.31

15 years agovideo: hitfb: Move over to dev_pm_ops.
Paul Mundt [Tue, 7 Jul 2009 02:50:57 +0000 (11:50 +0900)]
video: hitfb: Move over to dev_pm_ops.

A trivial update to move hitfb over to dev_pm_ops.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agovideo: hitfb: Convert to framebuffer_alloc().
Paul Mundt [Tue, 7 Jul 2009 02:44:56 +0000 (11:44 +0900)]
video: hitfb: Convert to framebuffer_alloc().

Follows the sh_mobile_lcdcfb change.

Also fixes up a memory leak with cmap allocation.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years agovideo: sh_mobile_lcdcfb: Convert to framebuffer_alloc().
Paul Mundt [Tue, 7 Jul 2009 02:24:32 +0000 (11:24 +0900)]
video: sh_mobile_lcdcfb: Convert to framebuffer_alloc().

All fb_info structures need to be allocated with framebuffer_alloc() due
to special initialization. Switch over to it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
15 years ago[CPUFREQ] Powernow-k8: support family 0xf with 2 low p-states
Mark Langsdorf [Sun, 26 Jul 2009 15:55:25 +0000 (10:55 -0500)]
[CPUFREQ] Powernow-k8: support family 0xf with 2 low p-states

Provide support for family 0xf processors with 2 P-states
below the elevator voltage.  Remove the checks that prevent
this configuration from being supported and increase the
transition voltage to prevent errors during the transition.

Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
15 years ago[CPUFREQ] fix (utter) cpufreq_add_dev mess
Mathieu Desnoyers [Fri, 3 Jul 2009 15:25:16 +0000 (11:25 -0400)]
[CPUFREQ] fix (utter) cpufreq_add_dev mess

OK, I've tried to clean it up the best I could, but please test this with
concurrent cpu hotplug and cpufreq add/remove in loops. I'm sure we will make
other interesting findings.

This is step one of fixing the overall locking dependency mess in cpufreq.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
CC: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
CC: rjw@sisk.pl
CC: mingo@elte.hu
CC: Shaohua Li <shaohua.li@intel.com>
CC: Pekka Enberg <penberg@cs.helsinki.fi>
CC: Dave Young <hidave.darkstar@gmail.com>
CC: "Rafael J. Wysocki" <rjw@sisk.pl>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: sven.wegener@stealer.net
CC: cpufreq@vger.kernel.org
CC: Thomas Renninger <trenn@suse.de>
Signed-off-by: Dave Jones <davej@redhat.com>
15 years ago[CPUFREQ] Cleanup locking in conservative governor
venkatesh.pallipadi@intel.com [Fri, 3 Jul 2009 00:08:33 +0000 (17:08 -0700)]
[CPUFREQ] Cleanup locking in conservative governor

Redesign the locking inside conservative driver. Make dbs_mutex handle all the
global state changes inside the driver and invent a new percpu mutex
to serialize percpu timer and frequency limit change.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
15 years ago[CPUFREQ] Cleanup locking in ondemand governor
venkatesh.pallipadi@intel.com [Fri, 3 Jul 2009 00:08:32 +0000 (17:08 -0700)]
[CPUFREQ] Cleanup locking in ondemand governor

Redesign the locking inside ondemand driver. Make dbs_mutex handle all the
global state changes inside the driver and invent a new percpu mutex
to serialize percpu timer and frequency limit change.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
15 years ago[CPUFREQ] Mark policy_rwsem as going static in cpufreq.c wont be exported
venkatesh.pallipadi@intel.com [Fri, 3 Jul 2009 00:08:31 +0000 (17:08 -0700)]
[CPUFREQ] Mark policy_rwsem as going static in cpufreq.c wont be exported

lock_policy_rwsem_* and unlock_policy_rwsem_* routines in cpufreq.c are
currently exported to drivers. Improper use of those locks can
result in deadlocks and it is better to keep the locks localized.
Two previous in-kernel users of these interfaces (ondemand and conservative),
do not use this interfaces any more. Schedule them for removal.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
15 years ago[CPUFREQ] Eliminate the recent lockdep warnings in cpufreq
venkatesh.pallipadi@intel.com [Fri, 3 Jul 2009 00:08:30 +0000 (17:08 -0700)]
[CPUFREQ] Eliminate the recent lockdep warnings in cpufreq

Commit b14893a62c73af0eca414cfed505b8c09efc613c although it was very
much needed to properly cleanup ondemand timer, opened-up a can of worms
related to locking dependencies in cpufreq.

Patch here defines the need for dbs_mutex and cleans up its usage in
ondemand governor. This also resolves the lockdep warnings reported here

http://lkml.indiana.edu/hypermail/linux/kernel/0906.1/01925.html
http://lkml.indiana.edu/hypermail/linux/kernel/0907.0/00820.html

and few others..

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
15 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 7 Jul 2009 00:45:44 +0000 (17:45 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix usage of bios intcall()
  x86: Remove unused function lapic_watchdog_ok()
  x86: Remove unused variable disable_x2apic
  x86, kvm: Fix section mismatches in kvm.c
  x86: Add missing annotation to arch/x86/lib/copy_user_64.S::copy_to_user
  x86: Fix fixmap page order for FIX_TEXT_POKE0,1
  amd-iommu: set evt_buf_size correctly
  amd-iommu: handle alias entries correctly in init code
  x86: Fix printk call in print_local_apic()
  x86: Declare check_efer() before it gets used
  x86: Mark device_nb as static and fix NULL noise
  x86: Remove double declaration of MSR_P6_EVNTSEL0 and MSR_P6_EVNTSEL1
  xen: Use kcalloc() in xen_init_IRQ()
  x86: Fix fixmap ordering
  x86: Fix symbol annotation for arch/x86/lib/clear_page_64.S::clear_page_c

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 6 Jul 2009 23:47:54 +0000 (16:47 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] amba: fix amba device resources
  [ARM] pgtable: file pte layout documentation
  [ARM] pgtable: swp pte layout documentation, definitions, and check
  [ARM] export __cpu_flush_dcache_page
  [ARM] 5576/1: Update kb9202_defconfig
  [ARM] 5581/1: U300 clock updates
  [ARM] 5579/1: Updated U300 defconfig

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
Linus Torvalds [Mon, 6 Jul 2009 23:47:15 +0000 (16:47 -0700)]
Merge git://git./linux/kernel/git/davem/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  Revert "ide: improve handling of Power Management requests"

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 6 Jul 2009 23:46:57 +0000 (16:46 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (39 commits)
  Revert "p54: Use SKB list handling helpers instead of by-hand code."
  sctp: fix warning at inet_sock_destruct() while release sctp socket
  tun/tap: Fix crashes if open() /dev/net/tun and then poll() it.
  dsa: fix 88e6xxx statistics counter snapshotting
  forcedeth: Fix NAPI race.
  drivers/net/smsc911x.c: Fix resource size off by 1 error
  pcnet_cs: add new id
  bnx2x: Fix the maximal values of coalescing timeouts.
  bnx2x: Disable HC coalescing when setting timeout to zero.
  tun: Fix device unregister race
  be2net: fix spurious interrupt handling in intx mode
  e1000e: disable K1 at 1000Mbps for 82577/82578
  e1000e: delay second read of PHY_STATUS register on failure of first read
  e1000e: prevent NVM corruption on sectors larger than 4K
  e1000e: do not write SmartSpeed register bits on parts without support
  e1000e: delay after LCD reset and proper checks for PHY configuration done
  e1000e: PHY loopback broken on 82578
  ixgbe: Not allow 8259x unsupported wol options change from ethtool
  ixgbe: fix inconsistent SFP/SFP+ failure results.
  ixgbe: fix regression on some 82598 adapters
  ...

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Mon, 6 Jul 2009 21:07:00 +0000 (14:07 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: Fix IRQ swizzling for ARI-enabled devices
  ia64/PCI: adjust section annotation for pcibios_setup()
  x86/PCI: get root CRS before scanning children
  x86/PCI: fix boundary checking when using root CRS
  PCI MSI: Fix restoration of MSI/MSI-X mask states in suspend/resume
  PCI MSI: Unmask MSI if setup failed
  PCI MSI: shorten PCI_MSIX_ENTRY_* symbol names
  PCI: make pci_name() take const argument
  PCI: More PATA quirks for not entering D3
  PCI: fix kernel-doc warnings
  PCI: check if bus has a proper bridge device before triggering SBR
  PCI: remove pci_dac_dma_... APIs on mn10300
  PCI ECRC: Remove unnecessary semicolons
  PCI MSI: Return if alloc_msi_entry for MSI-X failed

15 years agoMerge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze
Linus Torvalds [Mon, 6 Jul 2009 21:05:57 +0000 (14:05 -0700)]
Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze

* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix cast warning for init.c
  microblaze: Wire up new syscalls
  microblaze: use generic syscalls.h
  microblaze: clean up signal handling
  microblaze: convert all simple headers to use asm-generic
  microblaze: use the generic lib/checksum.c
  microblaze: fall back on generic header files for the ABI

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg...
Linus Torvalds [Mon, 6 Jul 2009 21:05:09 +0000 (14:05 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/penberg/slab-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  SLAB: Fix lockdep annotations
  fix RCU-callback-after-kmem_cache_destroy problem in sl[aou]b

15 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Mon, 6 Jul 2009 21:04:25 +0000 (14:04 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (25 commits)
  V4L/DVB (12206): get_dvb_firmware: Correct errors in MPC718 firmware extraction logic
  V4L/DVB (12203): radio-si470x: fix lock imbalance
  V4L/DVB (12202): em28xx, fix lock imbalance
  V4L/DVB (12172): em28xx: Add autodetection code for Silvercrest 1.3 mpix
  V4L/DVB (12171): em28xx: fix webcam usage with different output formats
  V4L/DVB (12169): em28xx-video: fix VIDIOC_G_FMT and VIDIOC_ENUMFMT with webcams
  V4L/DVB (12156): em28xx: Fix tuning for Terratec Cinergy T XS USB (zl10353 version)
  V4L/DVB (12139): em28xx: add other video formats
  V4L/DVB (12138): em28xx: add support for Silvercrest Webcam
  V4L/DVB (12174): mt9v011: let's stick with datasheet values where it works
  V4L/DVB (12173): mt9v011: properly calculate image resolution registers
  V4L/DVB (12137): mt9v011: CodingStyle fixes
  V4L/DVB (12136): mt9v011: Some fixes at the register initialization table
  V4L/DVB (12135): Add a driver for mt9v011 sensor
  V4L/DVB (12166): cx23885: add FIXME comment above set_frontend override
  V4L/DVB (12165): cx23885: override set_frontend to allow rf input path switching on the HVR1275
  V4L/DVB (12148): move V4L2_PIX_FMT_SGRBG8 to the proper place
  V4L/DVB (12182): cx18: Add DVB-T support for Yuan MPC-718 cards with an MT352 or ZL10353
  V4L/DVB (12181): get_dvb_firmware: Add Yuan MPC718 MT352 DVB-T "firmware" extraction
  V4L/DVB (12180): cx18: Update Yuan MPC-718 card entry with better information and guesses
  ...

15 years agoMerge git://git.infradead.org/iommu-2.6
Linus Torvalds [Mon, 6 Jul 2009 21:03:59 +0000 (14:03 -0700)]
Merge git://git.infradead.org/iommu-2.6

* git://git.infradead.org/iommu-2.6:
  intel-iommu: Don't use identity mapping for PCI devices behind bridges
  intel-iommu: Use iommu_should_identity_map() at startup time too.
  intel-iommu: No mapping for non-PCI devices
  intel-iommu: Restore DMAR_BROKEN_GFX_WA option for broken graphics drivers
  intel-iommu: Add iommu_should_identity_map() function
  intel-iommu: Fix reattaching of devices to identity mapping domain
  intel-iommu: Don't set identity mapping for bypassed graphics devices
  intel-iommu: Fix dma vs. mm page confusion with aligned_nrpages()

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Mon, 6 Jul 2009 21:03:44 +0000 (14:03 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: sbp2: add support for disks >2 TB (and 16 bytes long CDBs)
  firewire: sbp2: add support for disks >2 TB (and 16 bytes long CDBs)
  firewire: core: do not DMA-map stack addresses

15 years agofb: Initialize fb_info mutexes in framebuffer_alloc()
Paul Mundt [Sun, 5 Jul 2009 15:25:57 +0000 (00:25 +0900)]
fb: Initialize fb_info mutexes in framebuffer_alloc()

This way they'll be properly initialized early enough for users that may
touch them before the framebuffer has been registered.

Drivers that allocate their fb_info structure some other way (like
matrocfb's broken static allocation) need to be fixed up appropriately.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agocred_guard_mutex: do not return -EINTR to user-space
Oleg Nesterov [Sun, 5 Jul 2009 19:08:26 +0000 (12:08 -0700)]
cred_guard_mutex: do not return -EINTR to user-space

do_execve() and ptrace_attach() return -EINTR if
mutex_lock_interruptible(->cred_guard_mutex) fails.

This is not right, change the code to return ERESTARTNOINTR.

Perhaps we should also change proc_pid_attr_write().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agolinux/sysrq.h needs linux/errno.h
Tobias Doerffel [Sun, 5 Jul 2009 19:08:23 +0000 (12:08 -0700)]
linux/sysrq.h needs linux/errno.h

In include/linux/sysrq.h the constant EINVAL is being used but is undefined
if include/linux/errno.h is not included before.

Fix this by adding #include <linux/errno.h> at the beginning.

Signed-off-by: Tobias Doerffel <tobias.doerffel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agodrivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer
InKi Dae [Sun, 5 Jul 2009 19:08:21 +0000 (12:08 -0700)]
drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer

Correct the CLKVAL_F field value of VIDEO MAIN CONTROLLER 0 REGITSTER.

Frame Rate is 1 / [ { (VSPW+1) + (VBPD+1) + (LIINEVAL + 1) + (VFPD+1)
} x {(HSPW+1) + (HBPD +1)
+ (HFPD+1) + (HOZVAL + 1) } x { ( CLKVAL+1 ) / ( Frequency of Clock
source ) } ] and VCLK = Video Clock Source / (CLKVAL +1).

therefore CLKVAL_F should be "CLKVAL_F = Frequency of Clock source / pixel
clock * refresh".

for this, I added refresh value in platform data like below.

static struct s3c_fb_pd_win xxx_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.refresh = 60,
.pixclock = (66+4+2+480)*(15+5+3+800),
.left_margin = 66,
.right_margin = 2,
.upper_margin = 15,
.lower_margin = 3,
.hsync_len = 4,
.vsync_len = 5,
.xres = 480,
.yres = 800,
},
.max_bpp = 32,
.default_bpp = 24,
};

static struct s3c_fb_platdata xxx_lcd_pdata __initdata = {
.win[0] = &xxx_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC
| VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
.setup_gpio = s5pc1xx_fb_gpio_setup_24bpp,
};

xxx_machine_init()
{
                   .
                   .
                   .
               s3c_fb_set_platdata(&xxx_lcd_pdata);
}

platform data defined in machine code should be setting using
s3c_fb_set_platdata().

Signed-off-by: InKi Dae <inki.dae@samsung.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoFix virt_to_phys() warnings
Kevin Cernekee [Sun, 5 Jul 2009 19:08:19 +0000 (12:08 -0700)]
Fix virt_to_phys() warnings

These warnings were observed on MIPS32 using 2.6.31-rc1 and gcc-4.2.0:

mm/page_alloc.c: In function 'alloc_pages_exact':
mm/page_alloc.c:1986: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast

drivers/usb/mon/mon_bin.c: In function 'mon_alloc_buff':
drivers/usb/mon/mon_bin.c:1264: warning: passing argument 1 of 'virt_to_phys' makes pointer from integer without a cast

[akpm@linux-foundation.org: fix kernel/perf_counter.c too]
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agomm: mark page accessed before we write_end()
Josef Bacik [Sun, 5 Jul 2009 19:08:18 +0000 (12:08 -0700)]
mm: mark page accessed before we write_end()

In testing a backport of the write_begin/write_end AOPs, a 10% re-read
regression was noticed when running iozone.  This regression was
introduced because the old AOPs would always do a mark_page_accessed(page)
after the commit_write, but when the new AOPs where introduced, the only
place this was kept was in pagecache_write_end().

This patch does the same thing in the generic case as what is done in
pagecache_write_end(), which is just to mark the page accessed before we
do write_end().

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>