staging: comedi: ni_labpc: tidy up labpc_8255_mmio()

The 8255 driver (*io) callback now includes the comedi_device pointer.

Instead of passing the (cast) pointer to subdev_8255_init(), pass the
'iobase' of the 8255 registers (DIO_BASE_REG).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up ni_8255_callback()

The 8255 driver (*io) callback now includes the comedi_device pointer.

Instead of passing the (cast) pointer to subdev_8255_init(), pass the
'iobase' of the 8255 registers (Port_A).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: 8255: add a comedi_device param to the (*io) callback

The 8255 driver uses an (*io) callback to read/write the registers
of the 8255 device. The default callback provided by the driver uses
inb()/outb() calls to access to registers based on an 'iobase' that
was initialized during the subdev_8255_init() and a 'port' value.

The users of this module can optionally provide a custom (*io) callback
to handle the read/write in another manner.

Make the (*io) callback a bit more flexible by also passing the
comedi_device pointer as a parameter.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci230: refactor iobase addresses

This driver uses two iobase addresses, found in PCI bars 2 and 3.
Currently, the address in PCI bar 2 is saved in the private data as
'iobase1' and the address in PCI bar 3 is saved in the comedi_device
as the 'iobase'. The 'iobase' is the base address of the daq
registers (ai/ao) of the board. The 'iobase1' address is the base
address of the 8255, 8254, configuration, and interrupt registers.

Flip the saving of these base addresses. Save the address from PCI
bar 2 in the comedi_device 'iobase' and the address from PCI bar 3
in the private data as 'daqio'.

This will help with some cleanup of the 8255 module.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidda: refactor iobase addresses

This driver uses two iobase addresses, found in PCI bars 2 and 3.
Currently, the address in PCI bar 3 is saved in the comedi_device as
the 'iobase' and the one in PCI bar 2 is just passed to subdev_8255_init()
as the 'iobase' parameter.

Save the PCI bar 3 address in the private data as 'daqio' and the
address from PCI bar 2 in the comedi_device as the 'iobase'.

This will help with some cleanup of the 8255 module.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcimdas: refactor iobase addresses

This driver uses three iobase addresses, found in PCI bars 2, 3, and 4.
Currently, the address in PCI bar 2 is saved in the comedi_device as
the 'iobase', the PCI bar 3 address is saved in the private data as
'BADR3' and the one in PCI bar 4 is just passed to subdev_8255_init()
as the 'iobase' parameter.

Flip the saving of the PCI bar 2 and 4 base addresses. Save the address
from PCI bar 2 in the private data as the 'daqio' and the address from
PCI bar 4 in the comedi_device as the 'iobase'.

This will help with some cleanup of the 8255 module.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: use dev->iobase for PCI bar 3

Currently the base address of the 8254 and 8255 devices, found in
PCI bar 3, is saved in the private data as 'pacer_counter_dio'.
The 'iobase' in the comedi_device is currently unused.

Save the address from PCI bar 3 in the comedi_device and remove
the unnecessary member from the private data.

This will help with some cleanup of the 8255 module.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: remove dio200_common_detach()

This exported function just does a free_irq() to release the interrupt
handler for the legacy and PCI dio200 drivers.

The legacy driver also calls comedi_legacy_detach() which would also
do the free_irq(). For that driver the just use comedi_legacy_detach()
directly for the (*detach).

For the PCI driver, add the free_irq() to the private (*datach) function.

Remove the, then unused, dio200_common_detach() function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: absorb dio200_subdev_timer_init()

This function is only called by amplc_dio200_common_attach() and it
can never fail. For aesthetics, absorb it into that function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200.h: remove boardinfo 'mainshift'

This member of the boardinfo is only set for the PCIE boards. Use the
'is_pcie' flag to determine if the offset needs to be shifted when
reading/writing the registers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200.h: rename 'has_enhancements' in boardinfo

This member of the boardinfor is only set for the PCIE boards. For
aeshetics, rename it to 'is_pcie'.

For clarity, use this flag in the (*auto_attach) to determine if the
dio200_pcie_board_setup() function needs to be called instead of using
the switch (context_model).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200.h: remove unnecessary function comment descriptions

The function names provide enough description. The extra comments are not
necessary. Remove them.

Also, tidy up some of the function declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200.h: remove struct dio200_layout definition

This struct is used to provide part of the boardinfo data. Using the extra
indirection does not provide any additional clarity to the driver.

Absorb the members from dio200_layout into dio200_board and remove the
extra 'layout' indirection.

For aesthetics, rename all the local variables used for the boardinfo
pointer to 'board'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: tidy up {comedi, pci}_driver declarations

For aesthetics, add some whitespace to these declarations.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200: tidy up comedi_driver declaration

For aesthetics, add some whitespace to the declaration.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: tidy register map defines

This commit performs a final tidying of the register map defines, bringing
them to a state that is ready for merging into addi_apci_1564.c when the
time comes.  Actions performed include:

*Removes the APCI1564_ADDRESS_RANGE macro, which is no longer needed/used.
*Renames the APCI1564_DIGITAL_OP_{VCC,CC}_INTERRUPT_{ENABLE,DISABLE}
macros to shorter names which are more consistent with the digital input
interrupt macros.
*Fixes a typo in a comment (dev>iobase changed to dev->iobase).
*Renames the APCI1564_TCW_* macros to APCI1564_COUNTER_* names to more
accurately reflect that they are only offsets to counter registers (since
only the counters are offset from dev->iobase).

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengraver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: Remove in-driver watchdog support code

Starting with commit 1496e5961113 ("staging: comedi: addi_apci_1564: use
addi_watchdog module to init watchdog subdevice"), this driver uses the
addi_watchdog module to provide support for the watchdog subdevice.  Any
remaining watchdog code in-driver can and should be removed.

This will also make future work on the timer and counter subdevices easier.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: remove apci1564_do_config

The DO config function served the purpose of configuring the diagnostic
interrupts for the board.  As the driver currently does not support
diagnostic interrupts, the digital output subdevice does not need an
insn_config operation and this function can be safely removed.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bmc: fix coding style warning

This is a patch to the vendorspecificextn.c that fixes coding style
warning message line over 80 characters found by checkpatch.pl script.
I am submitting this patch as required by Eudyptula Challenge.

Signed-off-by: Ramesh Basukala <basukalaramesh@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Remove redundant return of void function

This patch fix checkpatch.pl warning
Tested by compilation only.

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: ion.c Add a new blank line after decleration

This patch fix checkpatch.pl warning
Tested by compilation only.

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: ion_dummy_driver.c Replace kzalloc() by kcalloc()

This patch fix checkpatch.pl warning
Tested by compilation only.

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: Removed unneeded code.

This patch removes some unneeded code.
1) kzalloc() allocates 4 extra bytes so that we can align the return
   value.  But actually the return value is already aligned so we can
   remove the + 4 and the call to N_BYTE_ALIGMENT().
2) The memset() isn't needed because kzalloc() zeroes the allocation.

Suggested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: Lines over 80 characters fixed.

This is a patch to the hal/rtl8188eu_recv.c file that fixes up a "line
over 80 characters" warning found by the checkpatch.pl tool.

Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Declare Efuse_GetCurrentSize() as a static function

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_iol.h: Remove unused struct, enum and macro

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_iol.c: Remove unused functions

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function iol_ioconfig()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove rtl8188e_IOL_exec_cmds_sync() and its wrapper function

rtl8188e_IOL_exec_cmds_sync() is a unused function.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_IOL_cmd_buf_dump()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_IOL_cmd_tx_pkt_buf_dump()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused functions rtw_IOL_append_DELAY_[US, MS]_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_IOL_exec_cmds_sync()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_IOL_append_WD_cmd()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_IOL_cmd_boundary_handle()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtw_IOL_accquire_xmit_frame()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Hal8188EPhyCfg.h: Remove unused function declaration

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function storePwrIndexDiffRateOffset()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove odm_RegConfig8188E.[h, c] files

driver doesn't require these files anymore.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Cleanup and simplify Baseband configuration code

Cleanup and consolidate Baseband configuration related code in
HalHWImg8188E_BB.c file.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function odm_ConfigMAC_8188E()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function odm_ConfigRFReg_8188E()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused functions odm_ConfigRF_Radio[A, B]_8188E()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Cleanup and simplify RF configuration code

Cleanup and consolidate RF configuration related code in
HalHWImg8188E_RF.c file.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Cleanup and simplify MAC configuration code

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Cleanup firmware initialization code

Using rtl8188ee's (drivers/net/wireless/rtlwifi/rtl8188ee/fw.c) neat and clean
firmware initialization code to replace rtl8188eu's messy firmware
initialization code.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u/ieee80211: Fix sparse ieee80211_debug_init/_exit not declared warning

A sparse warning is generated about 'ieee80211_debug_init' and
'ieee80211_debug_exit' not being declared.

  drivers/staging/rtl8192u/ieee80211/ieee80211_module.c:275:12: warning:
  symbol 'ieee80211_debug_init' was not declared. Should it be static?
  drivers/staging/rtl8192u/ieee80211/ieee80211_module.c:297:13: warning:
  symbol 'ieee80211_debug_exit' was not declared. Should it be static?

These functions are used outside of this file so using static will not
work.  The prototypes are given in r8192U_core.c but sparse nonetheless
still gives a warning.  Fix the sparse warning by moving these
prototypes from r8192U_core.c to ieee80211.h.

Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Cc: Joel Pelaez Jorge <joelpelaez@gmail.com>
Cc: Andrea Merello <andrea.merello@gmail.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Joe Perches <joe@perches.com>
Cc: Himangi Saraogi <himangi774@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Cc: Ana Rey <anarey@gmail.com>
Cc: Chaitanya Hazarey <c@24.io>
Cc: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Cc: Teodora Baluta <teobaluta@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8192u/r8192U_wx.c: fix warnings issued by sparse

This minor patch motivated by eudyptula challenge fixes the following warnings issued
by `sparse' in drivers/staging/rtl8192u/r8192U_wx.c:
 .../r8192U_wx.c:27:5: warning: symbol 'rtl8180_rates' was not declared. Should it be static?
 .../r8192U_wx.c:961:22: warning: symbol 'r8192_get_wireless_stats' was not declared. Should it be static?
 .../r8192U_wx.c:990:24: warning: symbol 'r8192_wx_handlers_def' was not declared. Should it be static?

Signed-off-by: Ovidiu Toader <ovi@phas.ubc.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "uiOperation" -> "operation"

Renamed variable "uiOperation" -> "operation" in
bcm_char_ioctl_gpio_set_request().

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "uiBit" -> "bit"

Renamed variable "uiBit" -> "bit" in bcm_char_ioctl_gpio_set_request().

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "ucResetValue" -> "reset_val"

Renamed variable "ucResetValue" -> "reset_val" in
bcm_char_ioctl_gpio_set_request().

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "uiTempVar" -> "tmp"

Renamed variable "uiTempVar" -> "tmp" in

    bcm_char_ioctl_reg_write_private()
    bcm_char_ioctl_eeprom_reg_read()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "sWrmBuffer" -> "wrm_buff"

Renamed variable "sWrmBuffer" -> "wrm_buff" in

    bcm_char_ioctl_reg_write_private()
    bcm_char_ioctl_eeprom_reg_read()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "Bufflen" -> "buff_len"

Renamed variable "Bufflen" -> "buff_len" in
bcm_char_ioctl_reg_read_private().

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "IoBuffer" -> "io_buff"

Renamed variable "IoBuffer" -> "io_buff" in

    bcm_char_ioctl_reg_read_private()
    bcm_char_ioctl_reg_write_private()
    bcm_char_ioctl_reg_write_private()
    bcm_char_ioctl_eeprom_reg_read()
    bcm_char_ioctl_gpio_set_request()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "sRdmBuffer" -> "rdm_buff"

Renamed variable "sRdmBuffer" -> "rdm_buff" in

    bcm_char_ioctl_reg_read_private()
    bcm_char_ioctl_reg_write_private()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "Packet" -> "packet"

Renamed variable "Packet" -> "packet" in bcm_char_read().

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "PktLen" -> "pkt_len"

Renamed variable "PktLen" -> "pkt_len" in bcm_char_read().

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "pTarang" -> "tarang"

Renamed variable "pTarang" -> "tarang" in

    bcm_char_open()
    bcm_char_release()
    bcm_char_read()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "ulDSDMagicNumInUsrBuff" -> "dsd_magic_num_in_usr_buff"

Renamed variable "ulDSDMagicNumInUsrBuff" ->
"dsd_magic_num_in_usr_buff" in handle_flash2x_adapter().

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "Status" -> "status"

Renamed variable "Status" -> "status" in

    bcm_handle_nvm_read_cmd()
    handle_flash2x_adapter()
    bcm_char_ioctl_reg_read_private()
    bcm_char_ioctl_reg_write_private()
    bcm_char_ioctl_reg_write_private()
    bcm_char_ioctl_eeprom_reg_read()
    bcm_char_ioctl_gpio_set_request()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "stNVMReadWrite" -> "nvm_rw"

Renamed variable "stNVMReadWrite" -> "nvm_rw" in

    bcm_handle_nvm_read_cmd()
    handle_flash2x_adapter()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "pReadData" -> "read_data"

Renamed variable "pReadData" -> "read_data" in

    bcm_handle_nvm_read_cmd()
    handle_flash2x_adapter()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Renamed variable "Adapter" -> "ad"

Renamed variable "Adapter" -> "ad" in

    bcm_handle_nvm_read_cmd()
    handle_flash2x_adapter()
    bcm_char_open()
    bcm_char_release()
    bcm_char_read()
    bcm_char_ioctl_reg_read_private()
    bcm_char_ioctl_reg_write_private()
    bcm_char_ioctl_reg_write_private()
    bcm_char_ioctl_eeprom_reg_read()
    bcm_char_ioctl_gpio_set_request()

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Bcmchar.c: Fixed indentation of function arguments

Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lustre: ptlrpc: Donot initialise null

This patch fixes the following error using checkpatch.pl
Error: Do not initialise statics to 0 or NULL

Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lustre: ptlrpc: Fix pointer declaration

This patch fixes the following checkpatch.pl issue in client.c:
ERROR: "foo * bar" should be "foo *bar"

Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lustre: ptlrpc: Fix requires space

Fix checkpatch.pl issues spaces required.

Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/lnet: Fix potential uninitialized variable warning

Greg reports that with one of the patches in his queue
there's now an unused variable warning in lnet_parse_ip2nets
for ipaddrs variable.
Apparently the warning is a false positive as in all cases where
lnet_ipaddr_enumerate can return without setting ipaddrs to something
a negative return value is returned that is then checked
before we actually use ipaddrs.

Assign ipaddrs to NULL to quiet this.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Cleanup variable declarations in mdc_enqueue()

Changes:
- move const union vars to the top
- move rc to bottom
- do not initialize req
- set lvb_type to enum member instead of 0
- change __u64 to u64
- fix inconsistant columnization

Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove parentheses usage with return

Fix the following checkpatch error:

ERROR: return is not a function, parentheses are not required

Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: move else on the same line as closing brace

Fix the following checkpatch error:

ERROR: else should follow close brace '}'

Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix misplaced opening brace warnings

Fixes the following checkpatch error:

ERROR: that open brace { should be on the previous line

Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Added space between type name and *

Fixes the following checkpatch error:

ERROR: "(foo*)" should be "(foo *)"

Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

] staging: lustre: fix multi line strings

Fixes the following checkpatch warning:

WARNING: quoted string split across lines

Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: add blank lines after declarations

Fixes the following checkpatch warning:

WARNING: Missing a blank line after declarations

Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: replace c99 style comments with C89

Fixes the following checkpatch error:

ERROR: do not use C99 // comments

Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Add missing spaces around operators and braces.

Fixes the following checkpatch errors:

ERROR: space required after that ',' (ctx:VxV)
ERROR: space required after that close brace '}'

Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix lines over 80 chars

Fixes the following  checkpatch warning:

WARNING: line over 80 characters

Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: move open brace to next line after functions

Fixes the following checkpatch error:

ERROR: open brace '{' following function declarations go on the next line

Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove spaces from start of line

Fixes the following checkpatch warning:

WARNING: please, no spaces at the start of a line

Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove space between function name and and open parenthesis

Fixes following checkpatch warning:

WARNING: space prohibited between function name and open parenthesis '('

Signed-off-by: Srikrishan Malik <srikrishanmalik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix coding style issue: missing space after 'if'

Coding style issue reported by checkpatch.pl

Signed-off-by: Junien Fridrick <linux.kernel@junien.fridrick.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: add blank line after declaration

Adds a blank line after declaration to comply with coding style.

Signed-off-by: Ragnar B. Johannsson <ragnar@igo.is>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: fix incorrect indentation

Use tabs, not spaces.

Signed-off-by: Ragnar B. Johannsson <ragnar@igo.is>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: remove unnecessary braces

Removes unnecessary braces to comply with coding style.

Signed-off-by: Ragnar B. Johannsson <ragnar@igo.is>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: remove typedef from struct vnt_private

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: device_main Replace DEVICE_INFO with size of pointer

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: rf/wpactl/wroute use struct vnt_private

Replacing PSDevice.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: hostap/ioctl/iwctl use struct vnt_private

Replacing PSDevice.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: bssdb/datarate/dpc/power/rxtx use struct vnt_private

Replacing PSDevice.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: channel/wcmd/wctl/wmgr use struct vnt_private *

Replacing PSDevice.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: card change PSDevice to struct vnt_private

Repacing void *pDeviceHandler

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: baseband replace PSDevice

Coverting all functions to struct vnt_private.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: device.h use change __device_info to vnt_private

Coverting all functions to struct vnt_private in device.h and device_main.c

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: upc.h replace read and write memory functions

Update to the newer memory functions
readb -> ioread8
readw -> ioread16
readl -> ioread32
writeb -> iowrite8
writew -> iowrite16
writel -> iowrite32

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: upc.h: Remove unused macros

PCBv* are not used

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: CARDbSetBeaconPeriod call CARDbGetCurrentTSF to get TBTT

There is already a function to get next TBTT.

Replace code with CARDqGetNextTBTT.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: CARDqGetNextTBTT calculate qwTSF using do_div

Use do_div to compute equation as shown replacing existing code.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Replace and remove typedef QWORD/ DQWORD

Replace the variables with u64/__le64.

The endian variant is needed in some places endian correction is
needed.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>