image: respect TARGET_PER_DEVICE_ROOTFS for initramfs fit command

Fit command makes use of CONFIG_TARGET_ROOTFS_INITRAMFS_SEPARATE as the
cpio is provided externally and is not embedded in the kernel image.

As done with embedded cpio, also handle PER_DEVICE_ROOTFS by generating
a cpio for each rootfs and reference them by the ROOTFS_ID generated
previously. The generated cpio are placed in the linux directory + the
package ID.

Link: https://github.com/openwrt/openwrt/pull/12959
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

image: respect TARGET_PER_DEVICE_ROOTFS for initramfs

Initramfs images were using a common rootfs (TARGET_DIR) for all
devices, ignoring TARGET_PER_DEVICE_ROOTFS. If a single device required
a package to build a functional initramfs image, it should be included
by default for all devices or that device should be isolated into a new
subtarget. Now the initramfs will be built using the target-specific

Implementing Per Device Rootfs for Initramfs is not trivial as the
rootfs needs to be embedded in the kernel image. The kernel supports an
option to define the initramfs location and the image generation for the
kernel can't be run in parallel as other checks are done to config and
other arch dependent files.

To handle this, we prepare a config for each rootfs and we generate the
images under lock to prevent problem with parallel execution.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
[ rework implementation for locking support ]
Link: https://github.com/openwrt/openwrt/pull/12959
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: simplify SetInitramfs compression ALGO config setup

Simplify SetInitramfs compression ALGO config setup by using Makefile
foreach.
While at it also make it more readable.

Link: https://github.com/openwrt/openwrt/pull/12959
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: make LINUX_DIR configurable for SetInitramfs functions

Rework SetInitramfs functions to take a second arg to define the
location of the .config. This is needed in preparation for PER_ROOTFS
Initramfs support as we will prepare .config in dedicated directory and
use them only later when the image is actually built.

Link: https://github.com/openwrt/openwrt/pull/12959
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: allow different TARGET_DIR for initramfs

Allow Kernel/CompileImage/Initramfs to use a different rootfs location.
If the additional arg is not defined, TARGET_DIR is used by default.

This allows the caller to customize the kernel initramfs for different
rootfs.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
[ simplify commit and rework commit description ]
Link: https://github.com/openwrt/openwrt/pull/12959
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

generic: 6.6: mtk_eth_soc: add support for flow-control settings

Add patch implementing operations to get and set flow-control link
parameters of mtk_eth_soc via ethtool.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

generic: 6.6: mtk_eth_soc: import accepted patches

Import two imported patches accepted upstream.
Move from pending:
 - net: ethernet: mtk_eth_soc: implement .{get,set}_pauseparam ethtool ops

Initial import:
 - net: ethernet: mtk_ppe: Change PPE entries number to 16K

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

bcm27xx: update to latest RPi patches

The patches were generated from the RPi repo with the following command:
git format-patch v6.6.36..rpi-6.6.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

mediatek: filogic: openwrt,one: remove unneeded caldata extraction

WiFi calibration data is already obtained via in-kernel NVMEM framework.
There is no need to also do so in userspace.

Fixes: dd58ad968a ("mediatek/filogic: add OpenWrt One support")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mediatek: filogic: add missing ';;' in /etc/board.d/01_leds

Add missing ';;' to terminate switch-case script generating
board-specific LED configuration defaults.

Fixes: c71b68acdd ("mediatek: filogic: add Adtran SmartRG Mount Stuart series")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

ramips: gpio: convert to the generic GPIO driver

Drop most of the code in favor of the generic MMIO GPIO driver.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

ramips: gpio: use devm_platform_ioremap_resource()

Simplify the code.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

ramips: gpio: remove header "gpio.h"

There are no source files using it.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

ramips: gpio: always use dynamic GPIO numberspace base

The new numberspace base starts from 512 instead of 0. The number
base seems come from the kernel symbol CONFIG_GPIOLIB_FASTPATH_LIMIT.

Suppress warning:

gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

ramips: mt7621: fix GPIO switch pin number

The numberspace base has been changed since 6.6 kernel:

chip_num   chip0   chip1   chip2 (32 gpios per bank)
old base    480     448     416
new base    512     544     576

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

mediatek: filogic: add support for TP-LINK RE6000XD

This commit adds support for TP-LINK RE6000XD.
The device is quite similar to the Mercusys MR90X V1,
except only 3 LAN ports and more LEDs.
So thanks to csharper2005 for doing all the groundwork.

Device specification
--------------------
SoC Type:   MediaTek MT7986BLA, Cortex-A53, 64-bit
RAM:        MediaTek MT7986BLA (512MB)
Flash:      SPI NAND GigaDevice (128 MB)
Ethernet:   MediaTek MT7531AE + 2.5GbE MaxLinear GPY211C0VC (SLNW8)
Ethernet:   1x2.5Gbe (LAN3 2.5Gbps), 2xGbE (LAN 1Gbps, LAN1,
            LAN2)
WLAN 2g:    MediaTek MT7975N, b/g/n/ax, MIMO 4x4
WLAN 5g:    MediaTek MT7975P(N), a/n/ac/ax, MIMO 4x4
LEDs:       8 LEDs, 1 status blue, 2x WIFI blue, 2x signal
    blue/red, 3 LAN blue gpio-controlled
Button:     2 (Reset, WPS)
USB ports:  No
Power:      12 VDC, 2 A
Connector:  Barrel
Bootloader: Main U-Boot - U-Boot 2022.01-rc4. Additionally, ubi0
            partition contain "seconduboot" (also U-Boot 2022.01-rc4)

Serial console (UART), unpopulated
---------------------
                            V
+-------+-------+-------+-------+
| +3.3V |  GND  |  TX   |  RX   |
+---+---+-------+-------+-------+
    |
    +--- Don't connect

Disassemble: rm the 2 screws at the bottom and the one at the backside.
            un-clip the case starting at the edge above the LEDs.

Installation (UART)
-------------------
1. Place OpenWrt initramfs image on tftp server with IP 192.168.1.2
2. Attach UART, switch on the router and interrupt the boot process by
   pressing 'Ctrl-C'
3. Load and run OpenWrt initramfs image:
      tftpboot openwrt-mediatek-filogic-tplink_re6000xd-initramfs-kernel.bin bootm
4. Run 'sysupgrade -n' with the sysupgrade OpenWrt image

Notice: while I was successfull at activating ssh (as described
        here:
        https://www.lisenet.com/2023/gaining-ssh-access-to-tp-link-re200-wi-fi-range-extender/)

        Unfortunately I haven't found the correct root password.
        Looks like they are using a static password
        (md5crypt, salt + 21 characters) that is not the web
        interface admin password.

        The TP-LINK RE900XD looks like the very same device,
        according to the pictures and the firmware.
        But I haven't checked if the OpenWrt firmware works as well
        on that device.

        The second ubi partition (ubi1) is empty and there is no known
        dual-partition mechanism, neither in u-boot nor in the stock firmware.

Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>

kernel: bump 6.6 to 6.6.36

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.36

Manually rebased:
        generic/hack-6.6/765-mxl-gpy-control-LED-reg-from-DT.patch
        bcm27xx/patches-6.6/950-0536-dmaengine-dw-axi-dmac-Fixes-for-RP1.patch

Removed upstreamed:
bmips/patches-6.6/010-v6.10-mips-bmips-BCM6358-make-sure-CBR-is-correctly-set.patch[1]

All other patches automatically rebased.

1. https://github.com/openwrt/openwrt/commit/7c9644a7b5e557f05b818296287cdebdd38f1097

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>

kernel: bump 6.1 to 6.1.96

https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.96

Manually rebased:
generic/hack-6.1/765-mxl-gpy-control-LED-reg-from-DT.patch
reference:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/drivers/net/phy/mxl-gpy.c?h=v6.1.96&id=5bd1b7ab6ae5799c136e4319d8644c5ff9c71757

generic: Fix spelling in dmesg output during boot when using the fitblk driver.

generic/pending-6.1/510-block-add-uImage.FIT-subimage-block-driver.patch

All other patches automatically rebased.

Build system: Kirkwood bcm53xx

Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>

uboot-rockchip: Update to 2024.07

Re-enable FIT signature verification since we switched to use hyphen
for node name separators in commit 2b133ab19cd5 ("scripts: use sep-char for hash nodes").

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>

uboot-envtools: update to U-Boot release v2024.07

Remove upstreamed patches:
010-fw_env-fix-reading-NVMEM-device-s-compatible-value.patch
[commit f29c5ca33df4c77b9af2cbfb7ed90bf336613522]

011-fw_env-keep-calling-read-until-whole-flash-block-is-.patch
[commit 9e3003f79d168eac7ee65cd457e3904e2fb4eea8]

012-fw_env-autodetect-NAND-erase-size-and-env-sectors.patch
[commit d73a6641868029b5cae53ed00c5766921c9d8b1f]

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

tools: mkimage: update to U-Boot release v2024.07

Update to latest version.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

bcm47xx: drop 6.1 support

Drop configs, files and patches for Linux 6.1.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/15635
Signed-off-by: Robert Marko <robimarko@gmail.com>

bcm47xx: use kernel 6.6 by default

Switch to Linux kernel version 6.6.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/15635
Signed-off-by: Robert Marko <robimarko@gmail.com>

bcm47xx: remove old cache aliasing patches

Remove patches related to some ancient cache aliasing bugs that were fixed in earlier versions and are no longer relevant to us.

Co-authored-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/15635
Signed-off-by: Robert Marko <robimarko@gmail.com>

generic: gpio: fix broken GPIO for big endian CPUs

Align the "bgpio_bits" with the data bus width.

Fixes: https://github.com/openwrt/openwrt/issues/15739
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Suggested-By: Mark Mentovai <mark@mentovai.com>
Tested-by: Lóránd Horváth <lorand.horvath82@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15784
Signed-off-by: Robert Marko <robimarko@gmail.com>

ath79: suppress GPIO static base allocation warning

Silence ath79 GPIO driver warning by setting GPIO numberspace base
dynamically. This patch also reorganize and fix the GPIO numbers on
6.6 kernel. The new gpio chip base number algorithm:

gpiochip    ath79-SOC    ath9k-0       ath9k-1
base           512      512+ngpios   512+ngpios+10

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/15784
Signed-off-by: Robert Marko <robimarko@gmail.com>

ath79: fix 5GHz External Antenna A GPIO for BSAP-1840

Each ath9k device only has 10 gpios. ath9k-0 gpio number range is
502-511, and ath9k-1 gpio number range is 492-501. So "5GHz External
Antenna A" gpio line number should be 492 instead of 489.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/15784
Signed-off-by: Robert Marko <robimarko@gmail.com>

ath79: correct dts ngpios properties

SoC Model GPIO number

ar7100 12
ar7240 18(unknown, default)
ar7241 20
ar7242 18
ar9132 22(unknown, default)
ar9331 30
ar934x 23
qca953x 18
qca955x 24
qca956x 23

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/15784
Signed-off-by: Robert Marko <robimarko@gmail.com>

uboot-rockchip: use u-boot-rockchip.bin

use u-boot-rockchip.bin to copy SPL/TPL/U-Boot to the image.

since binman was used in mainline u-boot for rockchip, we can use
u-boot-rockchip.bin instead of idbloader.img and u-boot.itb.

Reviewed-by: Tianling Shen <cnsztl@immortalwrt.org>
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://github.com/openwrt/openwrt/pull/15815
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: add BDFs for Linksys WHW03 V1

BDFs come from latest firmware, version 1.1.19.209880 (2022-06-20):
- /lib/firmware/IPQ4019/v1/FCC/boardData_1_0_IPQ4019_DK04_2G.bin
- /lib/firmware/IPQ4019/v1/FCC/boardData_1_0_IPQ4019_DK04_5G.bin
- /lib/firmware/QCA9888/v1/FCC/boardData_2_0_QCA9888_5G_Y9690_SBS_HB.bin

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15844
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq-wifi: update to Git HEAD (2024-06-30)

f54581d ipq6018: add BDF for Edgecore EAP101
6df42f9 ipq40xx: add BDFs for Linksys WHW03 V1
e82cba7 ipq8074: add TP-Link EAP660 HD v1 BDF

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15844
Signed-off-by: Robert Marko <robimarko@gmail.com>

bcm27xx: base-files: diag: improve LEDs behaviour

As reported in https://github.com/openwrt/openwrt/issues/15834 using the PWR
LED for indicating diag status is confusing since this is usually used for
power supply failures on RPi devices.
This commit uses ACT LED for diag status and restores it to mmc activity.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

kernel: Add kmod-sctp-diag

Package the sctp_diag.ko file which already gets build when kmod-sctp
and kmod-inet-diag are selected.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://github.com/openwrt/openwrt/pull/15833
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: Add kmod-mfd

Package the mfd-core.ko kernel module. It is selected by the
kmod-hwmon-gsc already.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://github.com/openwrt/openwrt/pull/15833
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: Add mtd_nandbiterrs.ko to kmod-mtdtests

The mtd_nandbiterrs.ko kernel module was added with kernel 3.7. We
should package it like the other test modules.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://github.com/openwrt/openwrt/pull/15833
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: Add kmod-crypto-xxhash

kxxhash_generic.ko is a soft dependency of kmod-fs-btrfs, but we did not
package it. Extract the kmod-lib-xxhash and then package
xxhash_generic.ko.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://github.com/openwrt/openwrt/pull/15833
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: Add kmod-crypto-blake2b

The kmod-fs-btrfs package has a soft dependency to kmod-crypto-blake2b

The CONFIG_BTRFS_FS kernel build option selects CONFIG_CRYPTO_BLAKE2B,
but we did not package it before.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://github.com/openwrt/openwrt/pull/15833
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: Fix kmod-lib-lz4 packaging

The kernel provides two variants of the lz4 compression a normal version
and a high compression mode version. The old kmod-lib-lz4 package
contained the normal version plus one part of the lz4hc version. There
was already code which selected the kmod-lib-lz4hc package which did
not exists.

I split this into 3 packages. kmod-lib-lz4 and kmod-lib-lz4hc for the
normal the and high compression algorithm which contain the specific
code and the kmod-lib-lz4-decompress which contains the common
decompressor.

New we are also packaging lz4hc.ko

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://github.com/openwrt/openwrt/pull/15833
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

kernel: Extract kmod-nf-dup-inet

The nf_dup_ipv4.ko and nf_dup_ipv6.ko kernel module were packaged by
kmod-ipt-tee and kmod-nft-dup-inet at the same time. Extract them into a
separate package used by both.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://github.com/openwrt/openwrt/pull/15833
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

build: fix missing SOURCE_VERSION variable

The recipe Download/git-kernel uses DownloadMethod/git
which now requires a definition of SOURCE_VERSION instead of VERSION
due to Validate/git being used to check for the variables.

Rename the variable as intended to match with the others
that were renamed in the referenced commit.
This fixes the following Makefile parse error
when downloading a specific kernel repository version
when configured with the CONFIG_KERNEL_GIT_CLONE_URI option:

  Makefile:19: *** Download/git-kernel is missing the SOURCE_VERSION field..  Stop.

Fixes: 9fc79e2e2 ("download: don't overwrite VERSION variable")
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15858
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

target.mk: fix arm architecture level detection

Now kernel configs of armv6k CPUs don't include CONFIG_CPU_V6.
So armv6k CPUs cannot be detected as arm_v6.
Fix this by adding detection for CONFIG_CPU_V6K.

Signed-off-by: Lu jicong <jiconglu58@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15855
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

f2fs-tools: Add missing 'f2fslabel' symlink

`f2fslabel` is already built into `f2fs.fsck`, but is missing its symlink
in the final package.

Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/15851
Signed-off-by: Robert Marko <robimarko@gmail.com>

wifi-scripts: add missing dependency on ucode-mod-uci

Fixes the following error:

Syntax error: Unable to resolve path for module 'uci'
In line 3, byte 27:

 `import * as uci from 'uci';`
  Near here ----------------^

Fixes: 4a3ed518b2d0 ("wifi-scripts: rewrite wifi detect code in ucode")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

tools/e2fsprogs: fixup STAGING_DIR_HOST path evaluation in shell scripts

We have to use curly braces on the exported STAGING_DIR_HOST env variable,
instead of evaluating it directly as we are not in Make but a separate
shell script.

Otherwise it would fail with:
staging_dir/host/bin/compile_et: line 6: STAGING_DIR_HOST: command not found
staging_dir/host/bin/mk_cmds: line 5: STAGING_DIR_HOST: command not found

And so when krb5 tries to build it will fail as compile_et and mk_cmds will
return an error.

Fixes: 55bda9863dd0 ("tools/e2fsprogs: fix shell scripts under SDK")
Link: https://github.com/openwrt/openwrt/pull/15854
Signed-off-by: Robert Marko <robimarko@gmail.com>

tools/util-linux: build libuuid as PIC

Needed to fix users of libuuid.a as autoconf applies PIC to only shared
libraries by default.

Found when trying to build python3/host.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15852
Signed-off-by: Robert Marko <robimarko@gmail.com>

ramips: remove useless compatible strings from SoC dtsi

These removed compatible strings do not exist in the source code
nor the dt-binding documents. They are useless.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

generic: 6.6: net: ethernet: mediatek: Allow gaps in MAC allocation

Some devices with MediaTek SoCs don't use the first but only the second
MAC in the chip. Especially with MT7981 which got a built-in 1GE PHY
connected to the second MAC this is quite common.
Make sure to reset and enable PSE also in those cases by skipping gaps
using 'continue' instead of aborting the loop using 'break'.

Fixes: 75081235b8 ("generic: 6.6: (re-)add support multiple PPE to mtk_eth_soc")
Reported-by: Daniel Suchy <danny@danysek.cz>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

bmips: enet: restore netif_napi_add weight

Switch to netif_napi_add_weight and add back weight value from <= v5.15.

Fixes: 8f6033e287ea ("bmips: enet: add compatibility with kernel 6.1")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

generic: fitblk: typo in dmesg output

Fix spelling in dmesg output during boot when using the fitblk driver.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

pistachio: Fix setting mtd name

The bootloader provides the partition table using the boot arguments
and uses the name spi-nor and spi-nand for the different controllers.
The old code was not setting the name any more because mtd->name was
already set before. Move the setting of the name to the spi-mem code
now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

pistachio: Update to kernel 6.6

Refresh the patches and the configuration for kernel 6.6 and make
directly use of it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel/pistachio: Restore kernel files for v6.1

This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.

For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel/pistachio: Create kernel files for v6.6 (from v6.1)

This is an automatically generated commit.

When doing `git bisect`, consider `git bisect --skip`.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: bump 5.15 to 5.15.161

No manual changes needed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: bump 5.15 to 5.15.160

No manual changes needed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: bump 5.15 to 5.15.159

Removed because they are upstream:
   generic/pending-5.15/778-net-l2tp-drop-flow-hash-on-forward.patch
   https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=e97e0051056b6dbcc43ae1862dcfcb05d06517c3

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

hostapd: bump PKG_RELEASE

Signed-off-by: David Bauer <mail@david-bauer.net>

hostapd: don't ignore probe-requests with invalid DSSS params

Don't ignore probe requests which contain an invalid DS parameter for the
current operating channel.

As the comment outlines, the drop shall only apply if
dot11RadioMeasurementActivated is set to 1.

However, it was observed Linux clients (Debian 12 / NixOS 23.11)
with an Intel 8265 NIC may generate a probe request frame with
dot11RadioMeasurementActivated set to false and an invalid DSSS
parameter.

These were also dropped even though they should not have been. They
however should not have contained this parameter in the first place.

Don't drop Probe Requests which contain such an invalid field. This may
lead to more probe responses being sent, however it does fix very
frequent connection issues for these clients on 2.4 GHz.

Signed-off-by: David Bauer <mail@david-bauer.net>

malta: enable VM targets again

These targets are interesting for automated testing. The currently
available targets are from 2017 and either we should enable them again
or delete the remaining files on the download servers.

Signed-off-by: Paul Spooren <mail@aparcar.org>
Link: https://github.com/openwrt/openwrt/pull/15740
Link: https://github.com/openwrt/openwrt/pull/15740
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

tools/e2fsprogs: fix shell scripts under SDK

7c32295b0036be425ba0cd527eb06316a87d0ec0 exposed a problem where the SDK
builds these shell scripts with a nonsensical absolute path for the DIR
variable. Use sed to patch in $STAGING_DIR_HOST.

Also remove PKG_RELEASE as that is nonsensical for tools.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15841
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: habanero-dvk: fix LAN MAC adresses

Currently, only the WAN MAC is being populated on Habanero DVK, and that is
happening via the ethernet1 alias so U-Boot does it, previously ethernet0
was implicitly added in the SoC DTSI so it would populate the LAN MAC-s but
it was dropped(rightly so) so now LAN MAC-s and the GMAC one are random.

So, lets simply switch to using NVMEM to assign the proper MAC adresses.

Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: ipqess: do not free ipqess_init

If this function is marked as __init, kernel will splat when driver is
(re)bind
echo "c080000.ethernet">/sys/bus/platform/drivers/ipqess-edma/unbind
echo "c080000.ethernet">/sys/bus/platform/drivers/ipqess-edma/bind

Example with additional print messages, functions at boot:
[    2.039468] ipqess-edma c080000.ethernet: ipqess_axi_probe pre register_netdev
[    2.039530] ipqess-edma c080000.ethernet: *netdev: c27d2000
[    2.045609] ipqess-edma c080000.ethernet: &ipqess_init: c0d1e28c
[    2.051122] ipqess_init
[    2.057338] netdev: c27d2000
[    2.059492] ess = netdev_priv: c27d2500
[    2.062615] ess->pdev: c2138c00
[    2.066174] ess->pdev->dev: c2138c10
[    2.069314] ess->pdev->dev.of_node: ef6f6368
[    2.073120] ess->pdev->dev.of_node: /soc/ethernet@c080000

fails (bind) after unbind:
[   34.987948] ipqess-edma c080000.ethernet: ipqess_axi_probe pre register_netdev
[   34.988012] ipqess-edma c080000.ethernet: *netdev: c27d6000
[   34.994088] ipqess-edma c080000.ethernet: &ipqess_init: c0d1e28c
[   34.999652] 8<--- cut here ---
[   35.005802] Unable to handle kernel paging request at virtual address c0d1e28c when execute
[   35.008676] [c0d1e28c] *pgd=80c1941e(bad)
[   35.016918] Internal error: Oops: 8000000d [#1] SMP ARM

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Link: https://github.com/openwrt/openwrt/pull/15831
Signed-off-by: Robert Marko <robimarko@gmail.com>

ipq40xx: ipqess: pass up ethdev_addr probe defer

Notify via dev_info when a random MAC address is set.
of_get_ethdev_address can return -EPROBE_DEFER for NVMEM devices,
return this up, so that ipqess can defer as well.
Also move this MAC assignment from _init into _probe, so that this defer
can happen earlier.

Before change, with MAC address allocated from a built-in NVMEM layout
driver (mikrotik,routerboot-nvmem) with extra of_get_ethdev_address
result and random MAC printfs:
[    1.197571] ipqess-edma c080000.ethernet: ipqess_init of_get_ethdev_address ret:-517, of_node: /soc/ethernet@c080000
[    1.197690] ipqess-edma c080000.ethernet: generated random MAC address 22:e7:36:e0:e4:a3
[    1.614444] ipqess-edma c080000.ethernet eth0: entered promiscuous mode
[    5.055929] ipqess-edma c080000.ethernet eth0: configuring for fixed/internal link mode

after change:
[    1.173776] ipqess-edma c080000.ethernet: of_get_ethdev_address: -517
[    1.614607] ipqess-edma c080000.ethernet eth0: entered promiscuous mode
[    5.246105] ipqess-edma c080000.ethernet eth0: configuring for fixed/internal link mode
[    5.260754] ipqess-edma c080000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx

with extra __func__ printf to show _probe and _init:
[    1.173685] ipqess-edma c080000.ethernet: ipqess_axi_probe
[    1.173784] ipqess-edma c080000.ethernet: of_get_ethdev_address: -517
[    1.280347] ipqess-edma c080000.ethernet: ipqess_axi_probe
[    1.304844] ipqess-edma c080000.ethernet: ipqess_init
[    1.614664] ipqess-edma c080000.ethernet eth0: entered promiscuous mode

Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Link: https://github.com/openwrt/openwrt/pull/15831
Signed-off-by: Robert Marko <robimarko@gmail.com>

generic: 6.6: (re-)add support multiple PPE to mtk_eth_soc

Now that the issue with WED has been sorted out, re-add support for
multiple PPE to the mtk_eth_soc driver.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

kernel: mtd: ubi: avoid attaching "linux,ubi" mtd again

"linux,ubi" compatible MTD device can be automatically attached early
since commit fc153aa8d94f. Therefore, there is no need to attach MTD
devices named "ubi" or "data" again.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

e2fsprogs: remove HostBuild

These things already get built and installed by tools/e2fsprogs. No need
to duplicate.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15822
Signed-off-by: Robert Marko <robimarko@gmail.com>

bmips: backport upstreamed RAC patches

Replace downstream bmips RAC fixes with upstream patches.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
[backport upstream patches]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

ipq806x: 6.6: enable at803x driver

Used by ethernet interfaces on AP3935i.

Signed-off-by: Bryan Berg <bdb@north-eastham.org>
Link: https://github.com/openwrt/openwrt/pull/13629
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

ipq806x: ap3935: Use rgmii-id mode for LAN1

Fix issue with LAN1 interface on ap3935 devices, where the LAN
1interface won't come up after boot unless the bootloader has
initialized the network stack. Use of `fixed-link` in the prior code
kept the driver from clobbering PHY settings, but now that the driver
supports rgmii-id phy-mode, we can just use that.

Signed-off-by: Bryan Berg <bdb@north-eastham.org>
Link: https://github.com/openwrt/openwrt/pull/13629
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

ipq806x: ap3935: Use gmac0 mdio controller

Updates ap3935 target to use the mdio controller built-in to gmac0,
rather than having the SoC bit-bang mdio from gpio pins

Signed-off-by: Bryan Berg <bdb@north-eastham.org>
Link: https://github.com/openwrt/openwrt/pull/13629
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

tools: util-linux: mark hexdump patch as backport

The hexdump fix for --disable-all-programs has been merged upstream, so
mark it so.

Signed-off-by: Robert Marko <robimarko@gmail.com>

tools/coreutils: remove 64-bit time disable flag

This was added to support building coreutils on host systems
that still only have 32-bit time support.

Because other tools now also require the flag for building
with 32-bit time when support for 64-bit time is not present,
this flag is now added to all host builds
on a variable basis using the same test before building,
so it can now be removed from specific tools.

Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15799
Signed-off-by: Robert Marko <robimarko@gmail.com>

build: add test for 64-bit time support

Several GNU tools such as tar, coreutils, and findutils
now build with support for 64-bit time by default
and otherwise require reconfiguring with a flag
--disable-year2038 in order to build without 64-bit time.

Some standard C libraries, for example,
certain older versions of glibc such as 2.31
have large file support but not long time bits support:

  checking for ... option to enable large file support... -D_FILE_OFFSET_BITS=64
  checking for ... option for timestamps after 2038... support not detected

This test using C code taken from largefile.m4 in gnulib
uses math and casting to check for overflow
with a macro and array pair that can only be defined
when 64-bit time support is present, and otherwise errors.
It is the exact same code used to test for 64-bit time
during the configure stage of building these tools,
so the results of this test before configure takes place
will always be in concordance with the results of
the test that takes place during the configure script.

Based on the test, the configure flag --disable-year2038
is added to every host tool build depending on the host system.

When the year 2038 problem finally comes around,
the effect of the test can be converted
from the toggling of a configure option into a build prerequisite,
requiring it to pass in order to continue building.

Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/15799
Signed-off-by: Robert Marko <robimarko@gmail.com>

bmips: add support for Sagem F@ST3864OP

Specifications:
* SoC: BCM63168
* RAM: NT5CC64M16GP-DI, DDR3 128MiB
* NAND: W29N01HVSINA, 128MiB
* Ethernet: 4x1000M LAN, 1x 1000M WAN
* Serial interface: on board but not populated, 3.3V, 115200, 8N1

Notes:
* Use DSA for VLAN and switches
* Ethernet ports and USB works
* gpio-leds are not working
* WLAN, xDSL, and FXS are not going to work

Signed-off-by: Hang Zhou <929513338@qq.com>
[refactor, reorder, drop unneeded or not working stuff]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

bcm63xx-cfe: update to latest version

sagem: fast-3864-op:add cferam.000 file
tp-link: archer vr400 v1: add cfe file

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

tools: mtd-utils: use libuuid provided by util-linux

Now that util-linux is building libuuid we can simply use that instead
of manually pointing to e2fsprogs libuuid so we can disable building
libuuid in e2fsprogs.

Link: https://github.com/openwrt/openwrt/pull/15806
Signed-off-by: Robert Marko <robimarko@gmail.com>

tools: e2fsprogs: use standard make uninstall

There is no need to manually only remove 2 binaries during cleanup and
leave rest of the e2fsprogs installed stuff untouched, so instead use
make uninstall to do the cleanup.

Link: https://github.com/openwrt/openwrt/pull/15806
Signed-off-by: Robert Marko <robimarko@gmail.com>

tools: e2fsprogs: use libuuid provided by util-linux

We are now using util-linux to provide libuuid so disable building it
in e2fsprogs and simply use the util-linux provided one.

Disabling libuuid removes the need for custom install recipe.

Link: https://github.com/openwrt/openwrt/pull/15806
Signed-off-by: Robert Marko <robimarko@gmail.com>

tools: util-linux: build libuuid

util-linux usually provides libuuid, and is preffered by mtd-utils so lets
enable building libuuid so we can disable it later in e2fsprogs.

Only the static version of library is intentionally built.

Link: https://github.com/openwrt/openwrt/pull/15806
Signed-off-by: Robert Marko <robimarko@gmail.com>

tools: util-linux: use standard make install/uninstall

Instead of manually installing the binaries and removing them, we can now
simply rely on standard make install/uninstall as we are only building
tools we want to use.

This will be especially important when we start building libraries in
util-linux.

Link: https://github.com/openwrt/openwrt/pull/15806
Signed-off-by: Robert Marko <robimarko@gmail.com>

tools: util-linux: use --disable-all-programs

util-linux supports passing --disable-all-programs configure flag to
disable building anything that isnt then manually enabled.

So, lets switch to using that instead of manually having to disable all
tools we dont need.

However, current drawback is that there is no upstream support for enabling
building hexdump so I included a patch that is pending upstream[0].

[0] https://github.com/util-linux/util-linux/pull/3101

Link: https://github.com/openwrt/openwrt/pull/15806
Signed-off-by: Robert Marko <robimarko@gmail.com>

utils: mtd-utils: update to 2.2.0

Release notes:
https://lists.infradead.org/pipermail/linux-mtd/2024-March/104058.html

mtd-utils are currently depending on zlib, however it is not expressed
as a dependency and it is somehow being only pulled-in by lincurses-devel
so mtd-utils were able to compile.

Since 2.2.0 zlib is optional so lets disable support for it like for other
compressors since we dont package the mkfs.ubifs or mkfs.jffs2 that
are only users of compressors anyway.

Link: https://github.com/openwrt/openwrt/pull/15802
Signed-off-by: Robert Marko <robimarko@gmail.com>

utils: mtd-utils: drop autoreconf

Now that we are not patching mtd-utils with JFFS2 LZMA support there
is no need for autoreconf to be run.

Link: https://github.com/openwrt/openwrt/pull/15802
Signed-off-by: Robert Marko <robimarko@gmail.com>

ramips: yuncore_g720: fix buttons

Turns out the device got two buttons, while the currently listed on is
actually WPS, and the other (will hidden) button is intended as RESET.
Update DT accordingly.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

tools: mtd-utils: fix disabling tests

Passing --disable-tests does not do anything since upstream commit [0]
("Fix test binary installation") as that commit removed it since there is
already and existing --without-tests compile option to not compile
the tests at all as --disable-tests was just disabling their installation.

So, lets just pass --without-tests instead to disable test compilation.

[0] https://git.infraroot.at/mtd-utils.git/commit/?id=7170a28d46d5db1e7a9da24a5555a194a233ef0b

Fixes: 67efb6a66146 ("tools: mtd-utils: Update to version 2.1.4")
Link: https://github.com/openwrt/openwrt/pull/15791
Signed-off-by: Robert Marko <robimarko@gmail.com>

tools: mtd-utils: update to 2.2.0

Release notes:
https://lists.infradead.org/pipermail/linux-mtd/2024-March/104058.html

Manually refresh the portability and JFFS2 LZMA patches.

Since mtd-utils have converted most of the JFFS2 compressors to be compile
time configurable and manual refreshing of JFFS2 LZMA was needed I also
converted it to a compile time option and enabled the new --with-lzma
option.

Link: https://github.com/openwrt/openwrt/pull/15791
Signed-off-by: Robert Marko <robimarko@gmail.com>

bmips: sercomm,ad1018: remove unneeded LED default-state

Remove unneeded default-state from led_power_green (led@8) to be in line with
other bmips devices.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

bmips: innacomm,w3400v6: remove unneeded LED default-state

Remove unneeded default-state from led_power_green (led@4) to be in line with
other bmips devices.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

generic: 6.6: replace Aquantia pending LEDs patch with upstream version

Replace Aquantia pending LEDs patch with upstream version.
Sadly net maintainers didn't like integrated solution hence we still
need to handle LED restore on reset with custom solution.

Link: https://github.com/openwrt/openwrt/pull/15797
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

utils: mtd-utils: drop patches

We have been carrying the 100-fix_includes.patch and 130-lzma_jffs2.patch
for a long time but the reason is lost to history.

We dont need to carry the JFFS2 LZMA support patch as mkfs.jffs2 is not
even being packaged so its not even being used.

As for the 100-fix_includes.patch that also seems like a relic of history
as mtd-utils compiles fine without it.

So, lets drop both patches.

Link: https://github.com/openwrt/openwrt/pull/15790
Signed-off-by: Robert Marko <robimarko@gmail.com>

qualcommax: fix RAX120v2 PWM Fan controller wrong definition

Fix RAX120v2 PWM Fan controller wrong definition by using a non-existant
kmod and using the wrong compatible for it enabling an external clock
while actually the device use an internal one.

Link: https://github.com/openwrt/openwrt/pull/15796
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

generic: 6.6: backport patch for G671 PWM Fan controller support

Backport patch for G761 PWM Fan controller support. This is used by
an ipq807x RAX120v2 and have an internal clock that was currently
unconfigured making the device not working.

Link: https://github.com/openwrt/openwrt/pull/15796
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

ipq806x: fix broken line break with Linksys e8350-v1

Fix broken line break for Linksys e8350-v1 pushed with CRLF instead of
LF.

Fixes: 45b3c620e597 ("ipq806x: add support for Linksys e8350-v1")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

ipq806x: add support for Linksys e8350-v1

AC2400 Dual-Band Gigabit Wi-Fi Router base on ipq8064.
https://www.linksys.com/support-product?sku=E8350

Specification:
 - Qualcomm dual-core IPQ8064 @ 1.4 GHz
 - 512 MB of RAM
 - 4 MB of SPI NOR MX25U3235F
 - 128 MB of NAND S34MS01G2
 - Qualcomm QCA9880 2.4GHz 802.11bgn
 - Quantenna QSR1000 5GHz 802.11ac (no support)
 - 4 x 10/100/1000 Mbit/s w/ vlan support Ethernet
 - Qualcomm Atheros QCA8337 switch
 - 1 x 3.0 + 1 x 2.0 (combo with eSata port)
 - 115200, 8N1 internal serial console
 - Power, Reset, WPS and WLAN buttons
 - Power, WPS and WLAN leds
 - 12 VDC, 3 A power

Installation:
The installation must be done using web interface of the router.
To achive this new firmware-utils tool was added to set correct
magic headers for the factory images.

Installation from vendor firmware:
 1. Flash over the native Linksys WEB interface using factory image.

Installation using recovery mode:
 1. Power off the device and disconnect the WAN port.
    (Only LAN port to be connected)
 2. Press & hold the "Reset" button
 3. Power on the device & wait 10 seconds with pressed "Reset" button
 4. Set IP Internet Protocol on your PC from
    192.168.1.0/24 network (Router is on IP 192.168.1.1)
 5. Open the Firmware Recovery page in your browser:
    http://192.168.1.1/index.shtml
    Firmware Recovery -> File Name -> Recovery & Reboot

The device page in inbox:
https://openwrt.org/inbox/toh/linksys/linksys_ea8350_1

Signed-off-by: Sergey Filippov <sergey.filippov@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/15798
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

bmips: drop kernel 6.1 support

kernel 6.1 can be dropped since 6.6 is the default kernel.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

bmips: switch default kernel to 6.6

Update default kernel version to 6.6 for the bmips devices.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

bmips: add 6.6 kernel as testing

enable testing kernel version 6.6 for bmips

Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com>

bmips: refresh 6.6 kernel config files

Refresh config for kernel 6.6.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

bmips: 6.6: refresh kernel patches

refresh 6.6. kernel patches via 'make target/linux/refresh'

Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com>
[refresh patches]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

bmips: 6.6: copy patches, config from 6.1

copy the 6.1 config to 6.6

Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com>