drm/i915: Remove useless VLV_FEATURE Macro.

This macro got useless after commit 8d9c20e1d1e38
"drm/i915: Remove .is_mobile field from platform struct"

that removed is_mobile split from VLV definition.
Also this was never reused on any following platform.

So let's clean up a bit here.

Cc: Carlos Santa <carlos.santa@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1482184508-18346-1-git-send-email-rodrigo.vivi@intel.com

drm/i915: fully apply WaSkipStolenMemoryFirstPage

Don't even tell the mm allocator to handle the first page of stolen on
the affected platforms. This means that we won't inherit the FB in
case the BIOS decides to put it at the start of stolen. But the BIOS
should not be putting it at the start of stolen since it's going to
get corrupted. I suppose the bug here is that some pixels at the very
top of the screen will be corrupted, so it's not exactly easy to
notice.

We have confirmation that the first page of stolen does actually get
corrupted, so I really think we should do this in order to avoid any
possible future headaches, even if that means losing BIOS framebuffer
inheritance. Let's not use the HW in a way it's not supposed to be
used.

Notice that now ggtt->stolen_usable_size won't reflect the ending
address of the stolen usable range anymore, so we have to fix the
places that rely on this. To simplify, we'll just use U64_MAX.

v2: don't even put the first page on the mm (Chris)
v3: drm_mm_init() takes size instead of end as argument (Ville)
v4: add a comment explaining the reserved ranges (Chris)
    use 0 for start and U64_MAX for end when possible (Chris)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481808235-27607-1-git-send-email-paulo.r.zanoni@intel.com

drm/i915: skip the first 4k of stolen memory on everything >= gen8

BSpec got updated and this workaround is now listed as standard
required programming for all subsequent projects. This is confirmed to
fix Skylake screen flickering issues (probably caused by the fact that
we initialized a ring in the first page of stolen, but I didn't 100%
confirm this theory).

v2: this is the patch that fixes the screen flickering, document it.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94605
Cc: stable@vger.kernel.org
Tested-by: Dominik Klementowski <dominik232@gmail.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481727338-9901-1-git-send-email-paulo.r.zanoni@intel.com

drm/i915: Add a test that we terminate the trimmed sgtable as expected

In commit 0c40ce130e38 ("drm/i915: Trim the object sg table"), we expect
to copy exactly orig_st->nents across and allocate the table thusly.
The copy loop should therefore end with the new_sg being NULL.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161219124346.550-2-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Fallback to single PAGE_SIZE segments for DMA remapping

If we at first do not succeed with attempting to remap our physical
pages using a coalesced scattergather list, try again with one
scattergather entry per page. This should help with swiotlb as it uses a
limited buffer size and only searches for contiguous chunks within its
buffer aligned up to the next boundary - i.e. we may prematurely cause a
failure as we are unable to utilize the unused space between large
chunks and trigger an error such as:

 i915 0000:00:02.0: swiotlb buffer is full (sz: 1630208 bytes)

Reported-by: Juergen Gross <jgross@suse.com>
Tested-by: Juergen Gross <jgross@suse.com>
Fixes: 871dfbd67d4e ("drm/i915: Allow compaction upto SWIOTLB max segment size")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20161219124346.550-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/breadcrumbs: s/container_of/rb_entry/

In keeping with commit f802cf7e0986 ("drm/i915/debugfs: use
rb_entry()"), convert the primary user of the rbtrees over to using
rb_entry rather than the equivalent container_of.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161220104003.8044-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/debugfs: use rb_entry()

To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/62ce937ae9a341421942b4418515610d055fa653.1482158544.git.geliangtang@gmail.com

drm/i915: Simplify gem stolen initialization.

Let's take usage of IS_LP to simplify the gem stolen
initialization as suggest by Tvrtko.

Also assume that all new LP platforms follows the chv+
and others bdw+.

v2: Remove the wrong commit message about bxt and glk. (Ander)

Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482174347-24911-1-git-send-email-rodrigo.vivi@intel.com

drm/i915: Rename get stolen functions for LP platforms chv+

gen8 is used for both Broadwell and Cherryview but this
function here is only Cherryview and all next atom LP platforms.
So let's rename it to avoid confusion as suggested by Ville.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482096988-400-2-git-send-email-rodrigo.vivi@intel.com

drm/i915: Expand is_lp backwards to gen8_lp and gen7_lp.

Valleyview/Baytrail (gen7_lp) and Cherryview/Braswell (gen8_lp)
are both Atom platforms like Broxton/Apollolake and Geminilake.

So let's expand this is_lp back to these platforms and
create the IS_LP(dev_priv) so we can start simplifying a bit
our if/else for platform lists.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1482096988-400-1-git-send-email-rodrigo.vivi@intel.com

drm/i915: Prevent PPS stealing from a normal DP port on VLV/CHV

VLV apparently gets upset if the PPS for a pipe currently driving an
external DP port gets used for VDD stuff on another eDP port. The DP
port falls over and fails to retrain when this happens, leaving the
user staring at a black screen.

Let's fix it by also tracking which pipe is driving which DP/eDP port.
We'll track this under intel_dp so that we'll share the protection
of the pps_mutex alongside the pps_pipe tracking, since the two
things are intimately related.

I had plans to reduce the protection of pps_mutex to cover only eDP
ports, but with this we can't do that. Well, for for VLV/CHV at least.
For other platforms it should still be possible, which would allow
AUX communication to occur in parallel for multiple DP ports.

v2: Drop stray crap from a comment (Imre)
    Grab pps_mutex when clearing active_pipe
    Fix a typo in the commit message
v3: Make vlv_active_pipe() static

Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481738423-29738-1-git-send-email-ville.syrjala@linux.intel.com

drm/i915: Drop mutex after successful kref_put_mutex()

The kref_put_mutex() returns with the mutex held after freeing the
object - so we must remember to drop it...

Fixes: 69df05e11ab8 ("drm/i915: Simplify releasing context reference")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161219101357.28140-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Swap if(enable_execlists) in i915_gem_request_alloc for a vfunc

A fairly trivial move of a matching pair of routines (for preparing a
request for construction) onto an engine vfunc. The ulterior motive is
to be able to create a mock request implementation.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-7-chris@chris-wilson.co.uk

drm/i915/execlists: Request the kernel context be pinned high

PIN_HIGH is an expensive operation (in comparison to allocating from the
hole stack) unsuitable for frequent use (such as switching between
contexts). However, the kernel context should be pinned just once for
the lifetime of the driver, and here it is appropriate to keep it out of
the mappable range (in order to maximise mappable space for users).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-6-chris@chris-wilson.co.uk

drm/i915: Mark the shadow gvt context as closed

As the shadow gvt is not user accessible and does not have an associated
vm, we can mark it as closed during its construction. This saves leaking
the internal knowledge of i915_gem_context into gvt/.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-5-chris@chris-wilson.co.uk

drm/i915: Simplify releasing context reference

A few users only take the struct_mutex in order to release a reference
to a context. We can expose a kref_put_mutex() wrapper in order to
simplify these users, and optimise taking of the mutex to the final
unref.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-4-chris@chris-wilson.co.uk

drm/i915: Unify active context tracking between legacy/execlists/guc

The requests conversion introduced a nasty bug where we could generate a
new request in the middle of constructing a request if we needed to idle
the system in order to evict space for a context. The request to idle
would be executed (and waited upon) before the current one, creating a
minor havoc in the seqno accounting, as we will consider the current
request to already be completed (prior to deferred seqno assignment) but
ring->last_retired_head would have been updated and still could allow
us to overwrite the current request before execution.

We also employed two different mechanisms to track the active context
until it was switched out. The legacy method allowed for waiting upon an
active context (it could forcibly evict any vma, including context's),
but the execlists method took a step backwards by pinning the vma for
the entire active lifespan of the context (the only way to evict was to
idle the entire GPU, not individual contexts). However, to circumvent
the tricky issue of locking (i.e. we cannot take struct_mutex at the
time of i915_gem_request_submit(), where we would want to move the
previous context onto the active tracker and unpin it), we take the
execlists approach and keep the contexts pinned until retirement.
The benefit of the execlists approach, more important for execlists than
legacy, was the reduction in work in pinning the context for each
request - as the context was kept pinned until idle, it could short
circuit the pinning for all active contexts.

We introduce new engine vfuncs to pin and unpin the context
respectively. The context is pinned at the start of the request, and
only unpinned when the following request is retired (this ensures that
the context is idle and coherent in main memory before we unpin it). We
move the engine->last_context tracking into the retirement itself
(rather than during request submission) in order to allow the submission
to be reordered or unwound without undue difficultly.

And finally an ulterior motive for unifying context handling was to
prepare for mock requests.

v2: Rename to last_retired_context, split out legacy_context tracking
for MI_SET_CONTEXT.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-3-chris@chris-wilson.co.uk

drm/i915: Move intel_lrc_context_pin() to avoid the forward declaration

Just a simple move to avoid a forward declaration, though the diff likes
to present itself as a move of intel_logical_ring_alloc_request_extras()
in the opposite direction.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-2-chris@chris-wilson.co.uk

drm/i915: Add a reminder that i915_vma_move_to_active() requires struct_mutex

i915_vma_move_to_active() requires the struct_mutex for serialisation
with retirement, so mark it up with lockdep_assert_held().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161218153724.8439-1-chris@chris-wilson.co.uk

drm/i915: convert to using range_overflows

Convert some of the obvious hand-rolled ranged overflow sanity checks to
our shiny new range_overflows macro.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213203222.32564-4-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: introduce range_overflows utility macros

In a number places we hand-roll the overflow sanity check for ranges, so
roll that into single macro, conceived by Chris, along with its typed
variant.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213203222.32564-3-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: move vma sanity checking into i915_vma_bind

If we move the sanity checking from gen8_alloc_va_range_3lvl and
gen6_alloc_va_range into i915_vma_bind, we will increase our coverage to
now both callbacks. We also convert each WARN_ON over to a GEM_WARN_ON.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213203222.32564-2-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: introduce GEM_WARN_ON

In a similar spirit to GEM_BUG_ON we now also have GEM_WARN_ON, with the
simple goal of expressing warnings which are truly insane, and so are
only really useful for CI where we have some abusive tests.

v2:
  - use BUILD_BUG_ON_INVALID for !DEBUG_GEM
  - clarify commit message

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213203222.32564-1-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Fix use after free in logical_render_ring_init

Commit 3b3f1650b1ca ("drm/i915: Allocate intel_engine_cs
structure only for the enabled engines") introduced the
dynanically allocated engine instances and created an
potential use after free scenario in logical_render_ring_init
where lrc_destroy_wa_ctx_obj could be called after the engine
instance has been freed.

This can only happen during engine setup/init error handling
which luckily does not happen ever in practice.

Fix is to not call lrc_destroy_wa_ctx_obj since it would have
already been executed from the preceding engine cleanup.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 3b3f1650b1ca ("drm/i915: Allocate intel_engine_cs structure only for the enabled engines")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481894322-2145-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: relax uncritical udelay_range()

udelay_range(1, 2) is inefficient and as discussions with Jani Nikula
<jani.nikula@linux.intel.com> unnecessary here. This replaces this
tight setting with a relaxed delay of min=20 and max=50 which helps
the hrtimer subsystem optimize timer handling.

Fixes: commit be4fc046bed3 ("drm/i915: add VLV DSI PLL Calculations")
Link: http://lkml.org/lkml/2016/12/15/147
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481853578-19834-1-git-send-email-hofrat@osadl.org

drm/i915: relax uncritical udelay_range() settings

udelay_range(2, 3) is inefficient and as discussions with Jani Nikula
<jani.nikula@linux.intel.com> unnecessary here. This replaces this
tight setting with a relaxed delay of min=20 and max=50. which helps
the hrtimer subsystem optimize timer handling.

Link: http://lkml.org/lkml/2016/12/15/127
Fixes: commit 37ab0810c9b7 ("drm/i915/bxt: DSI enable for BXT")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481853560-19795-1-git-send-email-hofrat@osadl.org

drm/i915: Fix inconsistent naming of i915_guc_client parameter

We usually use 'client' as identifier for the i915_guc_client.
For unknown reason, few functions were using 'gc' name.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[joonas.lahtinen@linux.intel.com: Split two lines over 80]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161215195321.63804-1-michal.wajdeczko@intel.com

drm/i915: Optimise VMA lookup slightly

Cast VM pointers before substraction to save the compiler
doing a smart one which includes multiplication.

v2: Only keep the first optimisation and prettify it. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481639847-9214-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: disable PSR by default on HSW/BDW

We've been ignoring the poor bugzilla reporters that say PSR causes
system lockups and all other sorts of problems. The earliest bug
report is from April, so I think we can use the "revert the offending
commit if no fixes are presented within 8 months" rule here.

Fixes: 9b58e352b463 ("drm/i915: Enable PSR by default on Haswell and Broadwell.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97602
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97515
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96736
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96704
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96569
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95176
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94985
Cc: <stable@vger.kernel.org> # v4.6+
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481662664-18986-1-git-send-email-paulo.r.zanoni@intel.com

drm/i915: Fix setting of boost freq tunable

For limiting the max frequency of gpu, the max freq tunable
is not enough to hard limit the max gap. We now have also per
client boost max freq. When this tunable was introduced,
it was mistakenly made read only. Allow user to gain control by
setting it writable.

Fixes: 29ecd78d3b79 ("drm/i915: Define a separate variable and control for RPS waitboost frequency")
Cc: <stable@vger.kernel.org> # v4.9+
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481718380-9170-1-git-send-email-mika.kuoppala@intel.com

drm/i915: simplify check for I915G/I945G in bit 6 swizzling detection

Commit c9c4b6f6c283 ("drm/i915: fix swizzle detection for gen3") added a
complicated check for I915G/I945G. Pineview and other gen3 devices match
IS_MOBILE() anyway. Simplify.

Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481627459-488-1-git-send-email-jani.nikula@intel.com

drm/i915: tune down the fast link training vs boot fail

It's been unfixed since a while and no one is immediately working on
this. And we have the FIXME already. And now also a task in the DP
team's backlog.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
References: https://lists.freedesktop.org/archives/intel-gfx/2016-July/101951.html
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Adjust comment per Ville's feedback.]
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213195414.28923-1-daniel.vetter@ffwll.ch

drm/i915: clean up Hz to PWM for i965

Unify function structure as any other *_hz_to_pwm() functions are
structured.

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481616169-16210-4-git-send-email-mika.kahola@intel.com

drm/i915: Intel panel downclock cleanup

Let's switch to use dev_priv instead of dev when calling
intel_find_panel_downclock() function.

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481616169-16210-3-git-send-email-mika.kahola@intel.com

drm/i915: Intel panel detection cleanup

Let's switch to use private dev_priv instead of dev when detecting
intel panels.

Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481616169-16210-2-git-send-email-mika.kahola@intel.com

drm/i915: Move all the DP compliance data to a separate struct

This patch does not change anything functionally, just cleans up
the DP compliance related variables and stores them all together
in a separate struct intel_dp_compliance. There is another struct
intel_dp_compliance_data to store all the test data. This makes it easy to
reset the compliance variables through a memset instead of
individual resetting.

v2:
* Removed functional changes for EDID (Jani Nikula)

Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwl.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481329371-16306-1-git-send-email-manasi.d.navare@intel.com

drm/i915: Find fallback link rate/lane count

If link training fails, then we need to fallback to lower
link rate first and if link training fails at RBR, then
fallback to lower lane count.
This function finds the next lower link rate/lane count
value after link training failure and limits the max
link_rate and lane_count values to these fallback values.

v7:
* Remove unnecessary intializations and remove redundant
call to intel_dp_common_rates (Jani Nikula)
v6:
* Cap the max link rate and lane count to the max
values obtained during fallback link training (Daniel Vetter)
v5:
* Start the fallback at the lane count value passed not
the max lane count (Jani Nikula)
v4:
* Remove the redundant variable link_train_failed
v3:
* Remove fallback_link_rate_index variable, just obtain
that using the helper intel_dp_link_rate_index (Jani Nikula)
v2:
Squash the patch that returns the link rate index (Jani Nikula)

Acked-by: Tony Cheng <tony.cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481252712-12925-1-git-send-email-manasi.d.navare@intel.com

drm/i915: Compute sink's max lane count/link BW at Hotplug

Sink's capabilities are advertised through DPCD registers and get
updated only on hotplug. So they should be computed only once in the
long pulse handler and saved off in intel_dp structure for the use
later. For this reason two new fields max_sink_lane_count and
max_sink_link_bw are added to intel_dp structure.

This also simplifies the fallback link rate/lane count logic
to handle link training failure. In that case, the max_sink_link_bw
and max_sink_lane_count can be reccomputed to match the fallback
values lowering the sink capabilities due to link train failure.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480984058-552-3-git-send-email-manasi.d.navare@intel.com

drm/i915/bxt: add bxt dsi gpio element support

Request the GPIO by index through the consumer API. For now, use a quick
hack to store the already requested ones, simply because I have no idea
whether this actually works or not, and I have no way to test it.

v2 by Mika: switch *NULL* to *"panel"* when requesting gpio for MIPI/DSI
panel.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480923034-21916-1-git-send-email-mika.kahola@intel.com

drm/i915/debugfs: Move out pipe CRC code

In preparation to using a generic API in the DRM core for continuous CRC
generation, move the related code out of i915_debugfs.c into a new file.

Eventually, only the Intel-specific code will remain in this new file.

v2: Rebased.

v6: Rebased.

v7: Fix whitespace issue.

v9: Have intel_display_crc_init accept a drm_i915_private instead.

v12: Rebased.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481545788-18194-1-git-send-email-tomeu.vizoso@collabora.com

drm/i915: Parse panel backlight controller from VBT

Currently the backlight controller is taken as 0. It needs to derive
value from the VBT. Adding the necessary changes.

v2 by Jani:
 - drop obsolete comments, drop redundant initialization (Bob)
 - merge debug logging into one

Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Tested-by: Bob Paauwe <bob.j.paauwe@intel.com>
Tested-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481189178-426-1-git-send-email-jani.nikula@intel.com

drm/i915: Retire before attempting to evict from the active lists

Some object retain an extra pin whilst they are active (e.g. contexts).
This excludes them from being considered for eviction unless we idle the
GPU. If before we look at the active list, we retire beforehand we can
hopefully remove a few excess pins and reduce the amount of searching
required.

v2: Similar principle applies to evict_for_vma

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161209150555.602-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Reorder phys backing storage release

In commit a4f5ea64f0a8 ("drm/i915: Refactor object page API"), I
reordered the object->pages teardown to be more friendly wrt to a
separate obj->mm.lock. However, I overlooked the phys object and left it
with a dangling use-after-free of its phys_handle. Move the allocation
of the phys handle to get_pages and it release to put_pages to prevent
the invalid access and to improve symmetry.

v2: Add commentary about always aligning to page size.

Testcase: igt/drv_selftest/objects
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: a4f5ea64f0a8 ("drm/i915: Refactor object page API")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207133411.8028-1-chris@chris-wilson.co.uk

drm/i915/psr: report psr2 hw enabled from psr2_ctl

For PSR2 , as per spec, PSR2_CTL bit 31 to be set.
for psr1, bit 31 in SRD_CTL to be set. Reporting
"HW Enabled & Active bit" status for psr2 from SRD_CTL
gives  wrong status.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481307129-29354-1-git-send-email-vathsala.nagaraju@intel.com

drm/i915/perf: More documentation hooked to i915.rst

This adds a 'Perf' section to i915.rst with the following sub sections:
- Overview
- Comparison with Core Perf
- i915 Driver Entry Points
- i915 Perf Stream
- i915 Perf Observation Architecture Stream
- All i915 Perf Internals

v2:
    section headers in i915.rst (Daniel Vetter)
    missing symbol docs + other fixups (Matthew Auld)

Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207214033.3581-1-robert@sixbynine.org

drm/i915/gen9: Fix PCODE polling during SAGV disabling

According to the previous patch, it's possible atm that we call
intel_do_sagv_disable() only once during the 1ms period and time out if
that call fails. As opposed to this the spec says that we need to keep
retrying this request for a 1ms duration, so let's do this similarly to
the CDCLK change notification request.

v4-5:
- Rebased on the reply_mask, reply change.
v6:
- Remove w/s change. (Lyude)
- Rebased on the timeout_base argument change.

Cc: Lyude <cpaul@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 656d1b89e5ff ("drm/i915/skl: Add support for the SAGV, fix underrun hangs")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude <lyude@redhat.com> (v4)
Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-2-git-send-email-imre.deak@intel.com

drm/i915/gen9: Fix PCODE polling during CDCLK change notification

commit 848496e5902833600f7992f4faa82dc1546051ba
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date:   Wed Jul 13 16:32:03 2016 +0300

    drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL

increased the timeout to match the spec, but we still see a timeout on
at least one SKL. A CDCLK change request following the failed one will
succeed nevertheless.

I could reproduce this problem easily by running kms_pipe_crc_basic in a
loop. In all failure cases _wait_for() was pre-empted for >3ms and so in
the worst case - when the pre-emption happened right after calculating
timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only
once which failed and so _wait_for() timed out. As opposed to this the
spec says to keep retrying the request for at most a 3ms period.

To fix this send the first request explicitly to guarantee that there is
3ms between the first and last request. Though this matches the spec, I
noticed that in rare cases this can still time out if we sent only a few
requests (in the worst case 2) _and_ PCODE is busy for some reason even
after a previous request and a 3ms delay. To work around this retry the
polling with pre-emption disabled to maximize the number of requests.
Also increase the timeout to 10ms to account for interrupts that could
reduce the number of requests. With this change I couldn't trigger
the problem.

v2:
- Use 1ms poll period instead of 10us. (Chris)
v3:
- Poll with pre-emption disabled to increase the number of request
  attempts. (Ville, Chris)
- Factor out a helper to poll, it's also needed by the next patch.
v4:
- Pass reply_mask, reply to skl_pcode_request(), instead of assuming the
  reply is generic. (Ville)
v5:
- List the request specific timeout values as code comment. (Ville)
v6:
- Try the poll first with preemption enabled.
- Add code comment about first request being queued by PCODE. (Art)
- Add timeout_base_ms argument. (Ville)
v7:
- Clarify code comment about first queued request. (Chris)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Art Runyan <arthur.j.runyan@intel.com>
Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms
Cc: <stable@vger.kernel.org> # v4.2-
Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume")
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929
Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com

drm/i915: Use DRM_DEV_ERROR in i915_driver_load

Now that it is available we don't have to open code a similar
error message ourselves.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481051053-29783-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: Shrink pipe config checker

Replace INTEL_ERR_OR_DBG_KMS macro with an intel_err_or_dbg_kms
function to shrink the code and rodata strings.

   text    data     bss     dec     hex filename
1271480   41831    2016 1315327  1411ff i915.ko.0
1265160   41831    2016 1309007  13f94f i915.ko.2

Total of ~6 KiB saving across text and strings.

v2:
 * Annotate the function for printf-style checking.
 * Rename to pipe_config_err. (Chris Wilson)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481021420-5783-1-git-send-email-tvrtko.ursulin@linux.intel.com

drm/i915: Catch non-existent registers in find_fw_domain

Add WARN_ON to find_fw_domain to registers related to uninitialized
hardware.

v2:
- Print the uninitialized domains and register (Chris)

Cc: Imre Deak <imre.deak@intel.com>
Cc: Wang Elaine <elaine.wang@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481120559-17413-1-git-send-email-joonas.lahtinen@linux.intel.com

drm/i915: distinguish G33 and Pineview from each other

Pineview deserves to use its own platform enum (which was already added,
unused, previously). IS_G33() no longer matches Pineview, and gets
replaced by IS_G33() || IS_PINEVIEW() or equivalent. Pineview is no
longer an outlier among platform definitions.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481143689-19672-1-git-send-email-jani.nikula@intel.com

drm/i915: Add intel_atomic_get_existing_crtc_state function

This patch Adds a function to extract intel_crtc_state from the
atomic_state, if not available it returns NULL.

v2 (from Paulo):
 - Fix white space problem detected by checkpatch.

Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201154940.24446-7-mahesh1.kumar@intel.com

drm/i915/skl+: change WM calc to fixed point 16.16

This patch changes Watermak calculation to fixed point calculation.
Problem with current calculation is during plane_blocks_per_line
calculation we divide intermediate blocks with min_scanlines and
takes floor of the result because of integer operation.
hence we end-up assigning less blocks than required. Which leads to
flickers.

Changes since V1:
 - Add fixed point data type as per Paulo's review
Changes since V2:
 - use fixed_point instead of fp_16_16
Changes since V3:
 - rebase
Changes since V4 (from Paulo):
 - My original renaming suggestion was misunderstood, so implement it
 - Simplify fixed_16_16_to_u32 implementation
 - Fix indentation

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201154940.24446-6-mahesh1.kumar@intel.com

drm/i915/kbl: IPC workaround for kabylake

Display Workarounds #1141
IPC (Isoch Priority Control) may cause underflows.

KBL WA: When IPC is enabled, watermark latency values must be increased
by 4us across all levels. This brings level 0 up to 6us.

Changes since V1:
 - Add Workaround number in commit & code
Changes since V2 (from Paulo):
 - Bikeshed the WA tag so it looks like the others

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201154940.24446-4-mahesh1.kumar@intel.com

drm/i915/bxt: IPC WA for Broxton

Display Workarounds #1135
If IPC is enabled in BXT, display underruns are observed.
WA: The Line Time programmed in the WM_LINETIME register should be
half of the actual calculated Line Time.

Programmed Line Time = 1/2*Calculated Line Time

Changes since V1:
 - Add Workaround number in commit & code
Changes since V2 (from Paulo):
 - Bikeshed white space and make the WA tag look like the others

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201154940.24446-3-mahesh1.kumar@intel.com

drm/i915/skl: Add variables to check x_tile and y_tile

This patch adds variable to check for X_tiled & y_tiled planes, instead
of always checking against framebuffer-modifiers.

Changes:
 - Created separate patch as per Paulo's comment
 - Added x_tiled variable as well
Changes since V2:
 - Incorporate Paulo's comments
 - Rebase
Changes since V3 (from Paulo):
 - Bikeshed indentation

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201154940.24446-2-mahesh1.kumar@intel.com

drm/i915/dsi: Fix chv_exec_gpio disabling the GPIOs it is setting

Set the CHV_GPIO_GPIOEN bit when updating GPIOs from chv_exec_gpio.

Fixes: a0a6d4ffd2ad ("drm/i915/dsi: add support for gpio elements on CHV")
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201202925.12220-3-hdegoede@redhat.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/dsi: Fix swapping of MIPI_SEQ_DEASSERT_RESET / MIPI_SEQ_ASSERT_RESET

Looking at the ADF code from the Android kernel sources for a
cherrytrail tablet I noticed that it is calling the
MIPI_SEQ_ASSERT_RESET sequence from the panel prepare hook.

Until commit b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences
in panel prepare/unprepare hooks") the mainline i915 code was doing the
same. That commits effectively swaps the calling of MIPI_SEQ_ASSERT_RESET /
MIPI_SEQ_DEASSERT_RESET.

Looking at the naming of the sequences that is the right thing to do,
but the problem is, that the old mainline code and the ADF code was
actually calling the right sequence (tested on a cube iwork8 air tablet),
and the swapping of the calling breaks things.

This breakage was likely not noticed in testing because on cherrytrail,
currently chv_exec_gpio ends up disabling the gpio pins rather then
setting them (this is fixed in the next patch in this patch-set).

This commit fixes the swapping by fixing MIPI_SEQ_ASSERT/DEASSERT_RESET's
places in the enum defining them, so that their (new) names match their
actual use.

Changes in v2:
-Add a comment to the enum explaining that the assert/reassert names
 are swapped in the spec

Fixes: b1cb1bd29189 ("drm/i915/dsi: update reset and power sequences...")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161202150128.29871-1-hdegoede@redhat.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915/perf: use DRM_DEBUG for userspace issues

Avoid using DRM_ERROR for conditions userspace can trigger with a bad
config when opening a stream or from not reading data in a timely
fashion (whereby the OA buffer fills up). These conditions are tested
by i-g-t which treats error messages as failures if using the test
runner. This wasn't an issue while the i915-perf igt tests were being
run in isolation.

One message relating to seeing a spurious zeroed report was changed to
use DRM_NOTE instead of DRM_ERROR. Ideally this warning shouldn't be
seen, but it's not a serious problem if it is. Considering that the
tail margin mechanism is only a heuristic it's possible we might see
this from time to time.

Signed-off-by: Robert Bragg <robert@sixbynine.org:
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201172152.10893-1-robert@sixbynine.org

drm/i915: Protect DSPARB registers with a spinlock

Each DSPARB register can house bits for two separate pipes, hence
we must protect the registers during reprogramming so that parallel
FIFO reconfigurations happening simultaneosly on multiple pipes won't
corrupt each others values.

We'll use a new spinlock for this instead of the wm_mutex since we'll
have to move the DSPARB programming to happen from the vblank evade
critical section, and we can't use mutexes in there.

v2: Document why we use a spinlock instead of a mutex (Maarten)

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480947208-18468-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: use platform enum instead of duplicating PCI ID if possible

Duplicating the PCI ID for IS_FOO checks is redundant for a bunch of
platforms. Simplify.

Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/4f79321aca2e003a627ba8b6809af3716b7c25c9.1480520526.git.jani.nikula@intel.com

drm/i915: give G45 and GM45 their own platform enums

Distinguish them better.

Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/987709804bc8fe55475e7481fcee03e7b86b1ba3.1480520526.git.jani.nikula@intel.com

drm/i915: add some more "i" in platform names for consistency

Consistency FTW.

Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/9ab811dc06570bd3fc05a917ade1bdc9bb805a75.1480520526.git.jani.nikula@intel.com

drm/i915: rename BROADWATER and CRESTLINE to I965G and I965GM, respectively

Add more consistency to our naming. Pineview remains the outlier. Keep
using code names for gen5+.

v2: rebased

Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481105584-23033-1-git-send-email-jani.nikula@intel.com

drm/i915: keep intel device info structs in gen based order

Move G33 and Pineview higher up in the list. Add a couple of blank lines
for OCD while at it.

Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/ef4cc8e6ddf592c8c2769b84d4b88a5422d46ea5.1480520526.git.jani.nikula@intel.com

drm/i915: replace platform flags with a platform enum

The platform flags in device info are (mostly) mutually
exclusive. Replace the flags with an enum. Add the platform enum also
for platforms that previously didn't have a flag, and give them codename
logging in dmesg.

Pineview remains an exception, the platform being G33 for that.

v2: Sort enum by gen and date

v3: rebase on geminilake enabling

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480596595-3278-1-git-send-email-jani.nikula@intel.com

drm/i915/guc: Drop comment on fwif autogeneration

The firmware interface file was initially partially autogenerated, but
this is no longer the case.

It was never updated automatically, and a lot manual changes were
introduced since.

>From now on any changes to the firmware interface will be managed by
hand, which gives us flexibility when it comes to structure reuse
(HuC/GuC) and naming conventions.

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jeff Mcgee <jeff.mcgee@intel.com>
Cc: Sagar A. Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480953869-25267-1-git-send-email-arkadiusz.hiler@intel.com

drm/i915: Keep has_* in alphabetical order

As it already says in the comment block...

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161206015704.12654-1-michel.thierry@intel.com

drm/i915: Advertise ppgtt support type in platform definition

Instead of being hidden in sanitize_enable_ppgtt.
It also seems to be the place to do so nowadays.

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Use memcpy_from_wc for GPU error capture

On all platforms we now always read the contents of buffers via the GTT,
i.e. using WC cpu access. Reads are slow, but they can be accelerated
with an internal read buffer using sse4.1 (movntqda). This is our
i915_memcpy_from_wc() routine which also checks for sse4.1 support and
so we can fallback to using a regular slow memcpy if we need to.

When compressing the pages, the reads are currently done inside zlib's
fill_window() routine and so we must copy the page into a temporary
which is then already inside the CPU cache and fast for zlib's
compression. When not compressing the pages, we don't need a temporary
and can just use the accelerated read from WC into the destination.

v2: Use zstream locals to reduce diff and allocate the additional
temporary storage only if sse4.1 is supported.
v3: Use length=0 for the sse4.1 support check

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161206124051.17040-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: allow GEM_BUG_ON expr checking with !DEBUG_GEM

Use BUILD_BUG_ON_INVALID(expr) in GEM_BUG_ON when building without
DEBUG_GEM. This means the compiler can now check the validity of expr
without generating any code, in turn preventing us from inadvertently
breaking the build when DEBUG_GEM is not enabled.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161202184750.3843-1-matthew.auld@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/execlists: Use list_safe_reset_next() instead of opencoding

list.h provides a macro for updating the next element in a safe
list-iter, so let's use it so that it is hopefully clearer to the reader
about the unusual behaviour, and also easier to grep.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205142941.21965-6-chris@chris-wilson.co.uk

drm/i915: Enable swfence debugobject support for i915.ko

Only once the debugobject symbols are exported can we enable support for
debugging swfences when i915 is built as a module. Requires commit
2617fdca3f68 ("lib/debugobjects: export for use in modules")

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205142941.21965-5-chris@chris-wilson.co.uk

drm/i915: Implement local atomic_state_free callback

As we use debugobjects to track the lifetime of fences within our atomic
state, we ideally want to mark those objects as freed along with their
containers. This merits us hookin into config->funcs->atomic_state_free
for this purpose.

This allows us to enable debugobjects for sw-fences without triggering
known issues.

Fixes: fc1584059d6c ("drm/i915: Integrate i915_sw_fence with debugobjects")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205142941.21965-4-chris@chris-wilson.co.uk

drm/i915: Tidy i915_gem_valid_gtt_space()

We can replace a couple of tests with an assertion that the passed in
node is already allocated (as matches the existing call convention) and
by a small bit of refactoring we can bring the line lengths to under
80cols.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205142941.21965-3-chris@chris-wilson.co.uk

drm/i915: Fix i915_gem_evict_for_vma (soft-pinning)

Soft-pinning depends upon being able to check for availabilty of an
interval and evict overlapping object from a drm_mm range manager very
quickly. Currently it uses a linear list, and so performance is dire and
not suitable as a general replacement. Worse, the current code will oops
if it tries to evict an active buffer.

It also helps if the routine reports the correct error codes as expected
by its callers and emits a tracepoint upon use.

For posterity since the wrong patch was pushed (i.e. that missed these
key points and had known bugs), this is the changelog that should have
been on commit 506a8e87d8d2 ("drm/i915: Add soft-pinning API for
execbuffer"):

Userspace can pass in an offset that it presumes the object is located
at. The kernel will then do its utmost to fit the object into that
location. The assumption is that userspace is handling its own object
locations (for example along with full-ppgtt) and that the kernel will
rarely have to make space for the user's requests.

This extends the DRM_IOCTL_I915_GEM_EXECBUFFER2 to do the following:
* if the user supplies a virtual address via the execobject->offset
  *and* sets the EXEC_OBJECT_PINNED flag in execobject->flags, then
  that object is placed at that offset in the address space selected
  by the context specifier in execbuffer.
* the location must be aligned to the GTT page size, 4096 bytes
* as the object is placed exactly as specified, it may be used by this
  execbuffer call without relocations pointing to it

It may fail to do so if:
* EINVAL is returned if the object does not have a 4096 byte aligned
  address
* the object conflicts with another pinned object (either pinned by
  hardware in that address space, e.g. scanouts in the aliasing ppgtt)
  or within the same batch.
  EBUSY is returned if the location is pinned by hardware
  EINVAL is returned if the location is already in use by the batch
* EINVAL is returned if the object conflicts with its own alignment (as meets
  the hardware requirements) or if the placement of the object does not fit
  within the address space

All other execbuffer errors apply.

Presence of this execbuf extension may be queried by passing
I915_PARAM_HAS_EXEC_SOFTPIN to DRM_IOCTL_I915_GETPARAM and checking for
a reported value of 1 (or greater).

v2: Combine the hole/adjusted-hole ENOSPC checks
v3: More color, more splitting, more blurb.

Fixes: 506a8e87d8d2 ("drm/i915: Add soft-pinning API for execbuffer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205142941.21965-2-chris@chris-wilson.co.uk

drm/i915: Mark all non-vma being inserted into the address spaces

We need to distinguish between full i915_vma structs and simple
drm_mm_nodes when considering eviction (i.e. we must be careful not to
treat a mere drm_mm_node as a much larger i915_vma causing memory
corruption, if we are lucky). To do this, color these not-a-vma with -1
(I915_COLOR_UNEVICTABLE).

v2...v200: New name for -1.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161205142941.21965-1-chris@chris-wilson.co.uk

drm/i915/dsi: Do not clear DPOUNIT_CLOCK_GATE_DISABLE from vlv_init_display_clock_gating

On my Cherrytrail CUBE iwork8 Air tablet PIPE-A would get stuck on loading
i915 at boot 1 out of every 3 boots, resulting in a non functional LCD.
Once the i915 driver has successfully loaded, the panel can be disabled /
enabled without hitting this issue.

The getting stuck is caused by vlv_init_display_clock_gating() clearing
the DPOUNIT_CLOCK_GATE_DISABLE bit in DSPCLK_GATE_D when called from
chv_pipe_power_well_ops.enable() on driver load, while a pipe is enabled
driving the DSI LCD by the BIOS.

Clearing this bit while DSI is in use is a known issue and
intel_dsi_pre_enable() / intel_dsi_post_disable() already set / clear it
as appropriate.

This commit modifies vlv_init_display_clock_gating() to leave the
DPOUNIT_CLOCK_GATE_DISABLE bit alone fixing the pipe getting stuck.

Changes in v2:
-Replace PIPE-A with "a pipe" or "the pipe" in the commit msg and
comment

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97330
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161202142904.25613-1-hdegoede@redhat.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Pass crtc state to vlv_compute_wm_level()

Rather than accessing crtc->config in vlv_compute_wm_level() let's
pass in the crtc state explicitly. One step closer to atomic.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-16-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Clean up vlv_program_watermarks()

Add small helpers to make the intent of the staggered enable/disable
sequence in vlv_program_watermarks() easier on the eyes.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-15-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Write all DDL registers in one go

We'll want to decouple the vlv/chv wm register reprogramming from any
single pipe. So let's just write all the DDL registers in one go. We
already write all the wm registers anyway since the bits are sprinkled
all over the place and so writing them for just a single pipe would have
been too messy anyway.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-14-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Zero out HOWM registers before writing new WM/HOWM register values

On VLV/CHV some of the watermark values are split across two registers:
low order bits in one, and high order bits in another. So we may not be
able to update a single watermark value atomically, and thus we must be
careful that we don't temporarily introduce out of bounds values during
the reprogramming. To prevent this we can simply zero out all the high
order bits initially, then we update the low order bits, and finally
we update the high order bits with the final value.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-13-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Skip vblank wait if cxsr was already off

Before we attempt to turn any planes on or off we must first exit
csxr. That's due to cxsr effectively making the plane enable bits
read-only. Currently we achieve that with a vblank wait right after
toggling the cxsr enable bit. We do the vblank wait even if cxsr was
already off, which seems wasteful, so let's try to only do it when
absolutely necessary.

We could start tracking the cxsr state fully somewhere, but for now
it seems easiest to just have intel_set_memory_cxsr() return the
previous cxsr state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-11-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Protect cxsr state with wm_mutex

Let's protect the cxsr state with the wm_mutex, since it might
get poked from multiple places if there's a parallel plane update
happening with a pipe getting enable/disabled.

It's still pretty racy for the old platforms, but for vlv/chv it
should work, I think. If not, we'll improve it later anyway.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-10-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Pass around dev_priv in vlv wm functions

Passing dev_priv instead of dev is the future. Let's make the vlv/chv wm
functions respect that idea.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-9-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Introduce vlv_invert_wm_value()

Add a small helper to do invert the vlv/chv values. Less fragile
perhaps, and let's us clearly mark all overlarge wateramarks as
disabled (by just making them all USHRT_MAX).

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-8-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Organize vlv/chv watermarks by plane_id

Store the vlv/chv watermark values in straight up arrays indexed by
enum plane_id. Avoids a lot of useless checks for the plane type when
we don't have to think which structure member we need to access.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-7-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Remove duplicated wm setup for vlv and chv

The code for vlv and chv wm latency/function pointer setup is
identical. Drop one of the copies.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-6-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Clean up VLV/CHV maxfifo watermark setup

Let's compute the maxfifo watermarks using max() instead of min().
Can't even recall why I did it the other way originally. Anyways
using max() avoids having to initialize the watermarks to the max
value first.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Fix the level 0 max_wm hack on VLV/CHV

The watermark should never exceed the FIFO size, so we need to
check against the current FIFO size instead of the theoretical
maximum when we clamp the level 0 watermark.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Use the ilk_disable_lp_wm() return value

ilk_disable_lp_wm() will tell us whether the LP1+ watermarks were
disabled or not, and hence whether we need to for the vblank wait or
not. Let's use that information to eliminate some useless vblank
waits.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Drop the nop intel_update_watermarks() call from haswell_crtc_enable()

HSW+ all use the .initial_watermarks() hook, so there's no point in
calling intel_update_watermarks() from HSW+ specific code. We'll still
hang on to the .initial_watermarks NULL check since theoretically if the
memory latencies are not populated we would not populate the function
pointer either.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480354637-14209-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Validate mode against max. link data rate for DP MST

Not validating the mode rate against max. link rate results in not pruning
invalid modes. For e.g, a HBR2 5.4 Gbps 2-lane configuration does not
support 4k@60Hz. But, we do not reject this mode.

So, make use of the helpers in intel_dp to validate mode data rate against
max. link data rate of a configuration.

v3: Renamed local variables again for consistency (Manasi)
v2: Renamed mode data rate local variable to be more explanatory.

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479243546-17189-1-git-send-email-dhinakaran.pandiyan@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Fix DP link rate math

We store DP link rates as link clock frequencies in kHz, just like all
other clock values. But, DP link rates in the DP Spec. are expressed in
Gbps/lane, which seems to have led to some confusion.

E.g., for HBR2
Max. data rate = 5.4 Gbps/lane x 4 lane x 8/10 x 1/8 = 2160000 kBps
where, 8/10 is for channel encoding and 1/8 is for bit to Byte conversion

Using link clock frequency, like we do
Max. data rate = 540000 kHz * 4 lanes = 2160000 kSymbols/s
Because, each symbol has 8 bit of data, this is 2160000 kBps
and there is no need to account for channel encoding here.

But, currently we do 540000 kHz * 4 lanes * (8/10) = 1728000 kBps

Similarly, while computing the required link bandwidth for a mode,
there is a mysterious 1/10 term.
This should simply be pixel_clock kHz * (bpp/8) to give the final result in
kBps

v2: Changed to DIV_ROUND_UP() and comment changes (Ville)

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479160220-17794-1-git-send-email-dhinakaran.pandiyan@intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

drm/i915: Add I2C and DP-AUX char devices to debug kconfig

These char devices exposing the driver's I2C and DP-AUX adapters for
user space tools are useful to debug display output related issues.
Enable them with the rest of additional driver debug options.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480696541-13697-1-git-send-email-imre.deak@intel.com

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Resync, and we need all the fancy new drm_mm stuff to implement more
efficient evict algorithms for softpin.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/i915: Update DRIVER_DATE to 20161205

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Backmerge tag 'v4.9-rc8' into drm-next

Linux 4.9-rc8

Daniel requested this so we could apply some follow on fixes cleanly to -next.

Linux 4.9-rc8

Merge tag 'drm-fixes-for-v4.9-rc8' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "A pretty small pull request: a couple of AMD powerxpress regression
  fixes and a power management fix, a couple of i915 fixes and one hdlcd
  fix, along with one core don't oops because of incorrect API usage fix"

* tag 'drm-fixes-for-v4.9-rc8' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: drop the struct_mutex when wedged or trying to reset
  drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error
  drm: Don't call drm_for_each_crtc with a non-KMS driver
  drm/radeon: fix check for port PM availability
  drm/amdgpu: fix check for port PM availability
  drm/amd/powerplay: initialize the soft_regs offset in struct smu7_hwmgr
  drm: hdlcd: Fix cleanup order