drm/rockchip: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120133348.6640-1-krzk@kernel.org

drm/udl: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120133341.6582-1-krzk@kernel.org

vga: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120133327.6519-1-krzk@kernel.org

Merge tag 'topic/drm-mipi-dsi-dsc-updates-2019-11-11' of ssh://git.freedesktop.org/git/drm-intel into drm-misc-next

Core Changes:
- Update DSI data type and command definitions
- Add helpers for sending compression mode and PPS packets

Driver Changes:
- Update tiny/st7586 to reflect a definition change

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87tv7a4eq3.fsf@intel.com

dma_resv: prime lockdep annotations

From d07ea81611ed6e4fb8cc290f42d23dbcca2da2f8 Mon Sep 17 00:00:00 2001
From: Steven Price <steven.price@arm.com>
Date: Mon, 11 Nov 2019 13:07:19 +0000
Subject: [PATCH] dma_resv: Correct return type of dma_resv_lockdep()

subsys_initcall() expects a function which returns 'int'. Fix
dma_resv_lockdep() so it returns an 'int' error code.

Fixes: b2a8116e2592 ("dma_resv: prime lockdep annotations")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c0a0c70d-e6fe-1103-2888-1ce1425f4a5d@arm.com

drm/r128: make ATI PCI GART part of its only user, r128

The ATI Rage 128 driver has been the only user of ATI PCI GART code
since Radeon dropped UMS support in commit 8333f607a631 ("drm/radeon:
remove UMS support"). Clean up the drm top level directory, Kconfig and
Makefile by making ati_pcigart.[ch] part of r128. Drop the
CONFIG_DRM_ATI_PCIGART config option made redundant by the change.

This reduces drm.ko module size slightly when legacy drivers are
enabled, and moves the baggage to r128.ko instead.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119100536.12024-1-jani.nikula@intel.com

drm/virtio: factor out virtio_gpu_update_dumb_bo

No functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20191023062539.11728-4-kraxel@redhat.com

drm/virtio: Simplify virtio_gpu_primary_plane_update workflow.

Return early for the no framebuffer (or disabled output) case.
Results in a simpler code flow for the remaining cases.
No functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20191023062539.11728-3-kraxel@redhat.com

drm/virtio: fix byteorder handling in virtio_gpu_cmd_transfer_{from, to}_host_3d functions

Be consistent with the rest of the code base.
No functional change.

v2:
 - fix sparse warnings for virtio_gpu_cmd_transfer_to_host_2d call.
 - move convert_to_hw_box helper function.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20191023062539.11728-2-kraxel@redhat.com

drm/xen: Simplify fb_create

The current code is a pretty good wtf moment, since we drop the
reference before we use it. It's not a big deal, because a) we only
use the pointer, so doesn't blow up and the real reason b) fb->obj[0]
already holds a full reference for us.

Might as well take the real pointer ins't of complicated games that
baffle.

Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: xen-devel@lists.xenproject.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191115092120.4445-7-daniel.vetter@ffwll.ch

drm/tilcdc: Drop drm_gem_fb_create wrapper

Doesn't do anything.

Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115092120.4445-6-daniel.vetter@ffwll.ch

drm/atmel: ditch fb_create wrapper

Spotted while looking through them all.

Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191115092120.4445-3-daniel.vetter@ffwll.ch

drm/gma500: Fixup fbdev stolen size usage evaluation

psbfb_probe performs an evaluation of the required size from the stolen
GTT memory, but gets it wrong in two distinct ways:
- The resulting size must be page-size-aligned;
- The size to allocate is derived from the surface dimensions, not the fb
  dimensions.

When two connectors are connected with different modes, the smallest will
be stored in the fb dimensions, but the size that needs to be allocated must
match the largest (surface) dimensions. This is what is used in the actual
allocation code.

Fix this by correcting the evaluation to conform to the two points above.
It allows correctly switching to 16bpp when one connector is e.g. 1920x1080
and the other is 1024x768.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107153048.843881-1-paul.kocialkowski@bootlin.com

fbdev: Unexport unlink_framebuffer()

There are no external callers of unlink_framebuffer() left. Make the
function an internal interface.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114125106.28347-4-tzimmermann@suse.de

drm/fb-helper: Remove drm_fb_helper_unlink_fbi()

There are no callers of drm_fb_helper_unlink_fbi() left. Remove the
function.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114125106.28347-3-tzimmermann@suse.de

drm/udl: Replace fbdev code with generic emulation

The udl driver can use the generic fbdev implementation. Convert it.

v5:
* initialize console after registering device
v4:
* hardcode console bpp to 16
v3:
* remove module parameter fb_bpp in favor of fbdev's video
* call drm_fbdev_generic_setup() directly; remove udl_fbdev_init()
* use default for struct drm_mode_config_funcs.output_poll_changed
* use default for struct drm_driver.lastclose

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114125106.28347-2-tzimmermann@suse.de

drm/komeda: Clean warnings: candidate for 'gnu_printf’ format attribute

komeda/komeda_event.c: In function ‘komeda_sprintf’:
komeda/komeda_event.c:31:2: warning: function ‘komeda_sprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
  num = vsnprintf(str->str + str->len, free_sz, fmt, args);

v2: Update the comment msg.

Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114100421.30510-1-james.qian.wang@arm.com

drm/gma500: remove set but not used variable 'channel_eq'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/gma500/cdv_intel_dp.c: In function cdv_intel_dp_complete_link_train:
drivers/gpu/drm/gma500/cdv_intel_dp.c:1596:7: warning: variable channel_eq set but not used [-Wunused-but-set-variable]

It is never used, so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1573902268-117518-1-git-send-email-zhengbin13@huawei.com

drm/fbdev: Fallback to non tiled mode if all tiles not present

In case of tiled displays, if we hotplug just one connector,
fbcon currently just selects the preferred mode and if it is
tiled mode then that becomes a problem if rest of the tiles are
not present.
So in the fbdev driver on hotplug when we probe the client modeset,
if we dont find all the connectors for all tiles, then on a connector
with one tile, just fallback to the first available non tiled mode
to display over a single connector.
On the hotplug of the consecutive tiled connectors, if the tiled mode
no longer exists because of fbcon size limitation, then return
no modes for consecutive tiles but retain the non tiled mode
on the 0th tile.
Use the same logic in case of connected boot case as well.
This has been tested with Dell UP328K tiled monitor.

v2:
* Set the modes on consecutive hotplugged tiles to no mode
if tiled mode is pruned (Dave)
v1:
* Just handle the 1st connector hotplug case
* v1 Reviewed-by: Dave Airlie <airlied@redhat.com>

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Dave Airlie <airlied@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113222952.9231-1-manasi.d.navare@intel.com

drm/edid: no CEA v3 extension is not an error

It is fine for displays without audio functionality to not implement
CEA v3 extension in their EDID. Do not return an error in that case,
instead return 0 as if there was a CEA v3 extension with no audio or
speaker block.

This fixes the second half of bug fdo#107825:
https://bugs.freedesktop.org/show_bug.cgi?id=107825

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115170736.7d88593d@endymion

drm/gma500: remove set but not used variable 'is_hdmi','is_crt'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/gma500/cdv_intel_display.c: In function cdv_intel_crtc_mode_set:
drivers/gpu/drm/gma500/cdv_intel_display.c:594:7: warning: variable is_hdmi set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/gma500/cdv_intel_display.c: In function cdv_intel_crtc_mode_set:
drivers/gpu/drm/gma500/cdv_intel_display.c:593:7: warning: variable is_crt set but not used [-Wunused-but-set-variable]

They are not used since commit acd7ef927e06 ("gma500:
Update the Cedarview clock handling")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1573828027-122323-4-git-send-email-zhengbin13@huawei.com

drm/gma500: remove set but not used variable 'error'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/gma500/psb_irq.c: In function psb_sgx_interrupt:
drivers/gpu/drm/gma500/psb_irq.c:210:6: warning: variable error set but not used [-Wunused-but-set-variable]

It is introduced by commit 64a4aff283ac ("drm/gma500:
Add support for SGX interrupts"), but never used, so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1573828027-122323-3-git-send-email-zhengbin13@huawei.com

drm/gma500: remove set but not used variable 'htotal'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/gma500/oaktrail_hdmi.c: In function htotal_calculate:
drivers/gpu/drm/gma500/oaktrail_hdmi.c:160:6: warning: variable htotal set but not used [-Wunused-but-set-variable]

It is introduced by commit 39ec748f7174 ("gma600: Enable HDMI support"),
but never used, so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1573828027-122323-2-git-send-email-zhengbin13@huawei.com

drm/panel: Add DT bindings for Sony ACX424AKP

This adds device tree bindings for the Sony ACX424AKP panel.
Let's use YAML.

Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114131525.3988-1-linus.walleij@linaro.org

drm/ast: Call struct drm_driver.{load, unload} before registering device

Both callbacks are deprecated. Remove them and call functions explicitly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113155857.9507-3-tzimmermann@suse.de

drm/ast: Replace drm_get_pci_device() and drm_put_dev()

Both functions are deprecated. Open-code them them in preparation
of removing struct drm_driver.{load,unload}.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113155857.9507-2-tzimmermann@suse.de

drm/print: group logging functions by prink or device based

In preparation for adding struct drm_device based logging, group the
existing functions by prink or struct device based logging. No
functional changes.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/51c70d80e7dd06c49ba3be56fbb6ae70edddc102.1572258936.git.jani.nikula@intel.com

drm/print: convert debug category macros into an enum

Mostly for improved documentation, convert the debug category macros
into an enum. Drop unused DRM_UT_NONE. Document previously undocumented
categories.

Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/96582479e7829d92b89adb805f829e23043ca85c.1572258936.git.jani.nikula@intel.com

drm/print: underscore prefix functions that should be private to print

We don't want people calling the functions directly. No functional
changes.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6b236ed4d2e6d2987eaaeb9cb737f9c3699281cc.1572258936.git.jani.nikula@intel.com

drm/print: rename drm_debug to __drm_debug to discourage use

drm_debug_enabled() is the way to check. __drm_debug is now reserved for
drm print code only. No functional changes.

v2: Rebase on move unlikely() to drm_debug_enabled()

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/840ff7292d1a39512bac2fcb1f45de9d50694bf1.1572258936.git.jani.nikula@intel.com

drm/amdgpu: use drm_debug_enabled() to check for debug categories

Allow better abstraction of the drm_debug global variable in the
future. No functional changes.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David (ChunMing) Zhou <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e30ddbd627be1fe1c67dd007e0d36f81a094bc91.1572258936.git.jani.nikula@intel.com

drm/nouveau: use drm_debug_enabled() to check for debug categories

Allow better abstraction of the drm_debug global variable in the
future. No functional changes.

v2: move unlikely() to drm_debug_enabled()

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/34a1e7db6eab6467c6607d9a57581d1de75d87da.1572258936.git.jani.nikula@intel.com

drm/i915: use drm_debug_enabled() to check for debug categories

Allow better abstraction of the drm_debug global variable in the
future. No functional changes.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e94fe4977c5b8cac68556318be81f8e422e973fd.1572258936.git.jani.nikula@intel.com

drm/komeda: Adds gamma and color-transform support for DOU-IPS

Adds gamma and color-transform support for DOU-IPS.
Adds two caps members fgamma_coeffs and ctm_coeffs to komeda_improc_state.
If color management changed, set gamma and color-transform accordingly.

v5: Rebase with drm-misc-next

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112110927.20931-5-james.qian.wang@arm.com

drm/komeda: Add drm_ctm_to_coeffs()

This function is for converting drm_color_ctm matrix to komeda hardware
required required Q2.12 2's complement CSC matrix.

v2:
  Move the fixpoint conversion function s31_32_to_q2_12() to drm core
  as a shared helper.

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112110927.20931-4-james.qian.wang@arm.com

drm/komeda: Add drm_lut_to_fgamma_coeffs()

This function is used to convert drm color lut to komeda HW required curve
coeffs values.

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112110927.20931-3-james.qian.wang@arm.com

drm: Add a new helper drm_color_ctm_s31_32_to_qm_n()

Add a new helper function drm_color_ctm_s31_32_to_qm_n() for driver to
convert S31.32 sign-magnitude to Qm.n 2's complement that supported by
hardware.

V4: Address Mihai, Daniel and Ilia's review comments.
V5: Includes the sign bit in the value of m (Qm.n).
V6: Allows m = 0 according to Mihail's comments.
V7: Address Mihail's comments.
V8: Use type 'u32' to replace 'uint32_t'
V9: Rebase.

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112110927.20931-2-james.qian.wang@arm.com

drm/fb-helper: unexport drm_fb_helper_generic_probe

Not sure we don't yet have this as a patch somewhere ...

Motivation is that the automatic lifetime management of the generic fbdev
code is quite tricky, and it'll get even more tricky. Allowing drivers
to just use the fb_probe looks like a recipe for disaster.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112175048.1581-1-daniel.vetter@ffwll.ch

drm/bridge: anx6345: Fix compilation breakage on systems without CONFIG_OF

The driver assumes that the platform uses the device tree, and thus relies
on some fields (of_node) being declared in some structures (drm_bridge).

This isn't true for all platforms, so make sure we can only compile the
ANX6345 on platforms where DT support is selected.

Cc: Torsten Duwe <duwe@lst.de>
Fixes: 6aa192698089 ("drm/bridge: Add Analogix anx6345 support")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112204551.541449-1-maxime@cerno.tech

drm/komeda: Fix komeda driver build error

Fix the build errors lead by

'commit 4039f0293bbd ("drm/komeda: Add option to print WARN- and INFO-level IRQ events")'

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113013114.3013-1-james.qian.wang@arm.com

drm/bridge: fix anx6345 compilation for v5.5

The anx6345 driver originally was copied from anx78xx.c, which has meanwhile
seen a few changes. In particular, the removal of drm_dp_link helpers and the
discontinuation to include drm_bridge.h from drm_crtc.h breaks compilation
in linux-5.5. Apply equivalents of these changes to anx6345.c.

Fixes: 6aa192698089 ("drm/bridge: Add Analogix anx6345 support")
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112175940.GA13539@lst.de

drm/virtgpu: fix double unregistration

drm_put_dev also calls drm_dev_unregister, so dev will be unregistered
twice.
Replace it with drm_dev_put to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191109075417.29808-1-hslester96@gmail.com

drm/komeda: add rate limiting disable to err_verbosity

It's possible to get multiple events in a single frame/flip, so add an
option to print them all.

Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-6-mihail.atanassov@arm.com

drm/komeda: Add option to print WARN- and INFO-level IRQ events

Extra detail (normally off) almost never hurts.

Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-5-mihail.atanassov@arm.com

drm/komeda: Optionally dump DRM state on interrupts

It's potentially useful information when diagnosing error/warn IRQs, so
dump it to dmesg with a drm_info_printer. Hide this extra debug dumping
behind another komeda_dev->err_verbosity bit.

Note that there's not much sense in dumping it for INFO events,
since the VSYNC event will swamp the log.

Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-4-mihail.atanassov@arm.com

drm/komeda: Remove CONFIG_KOMEDA_ERROR_PRINT

Now that there's a debugfs node to control the same, remove the
config option.

Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-3-mihail.atanassov@arm.com

drm/komeda: Add debugfs node to control error verbosity

Named 'err_verbosity', currently with only 1 active bit in that
replicates the existing level - print error events once per flip.

Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-2-mihail.atanassov@arm.com

drm/mcde: Handle pending vblank while disabling display

Disabling the display using MCDE currently results in a warning
together with a delay caused by some timeouts:

    mcde a0350000.mcde: MCDE display is disabled
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 20 at drivers/gpu/drm/drm_atomic_helper.c:2258 drm_atomic_helper_commit_hw_done+0xe0/0xe4
    Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support)
    Workqueue: events drm_mode_rmfb_work_fn
    [<c010f468>] (unwind_backtrace) from [<c010b54c>] (show_stack+0x10/0x14)
    [<c010b54c>] (show_stack) from [<c079dd90>] (dump_stack+0x84/0x98)
    [<c079dd90>] (dump_stack) from [<c011d1b0>] (__warn+0xb8/0xd4)
    [<c011d1b0>] (__warn) from [<c011d230>] (warn_slowpath_fmt+0x64/0xc4)
    [<c011d230>] (warn_slowpath_fmt) from [<c0413048>] (drm_atomic_helper_commit_hw_done+0xe0/0xe4)
    [<c0413048>] (drm_atomic_helper_commit_hw_done) from [<c04159cc>] (drm_atomic_helper_commit_tail_rpm+0x44/0x6c)
    [<c04159cc>] (drm_atomic_helper_commit_tail_rpm) from [<c0415f5c>] (commit_tail+0x50/0x10c)
    [<c0415f5c>] (commit_tail) from [<c04160dc>] (drm_atomic_helper_commit+0xbc/0x128)
    [<c04160dc>] (drm_atomic_helper_commit) from [<c0430790>] (drm_framebuffer_remove+0x390/0x428)
    [<c0430790>] (drm_framebuffer_remove) from [<c0430860>] (drm_mode_rmfb_work_fn+0x38/0x48)
    [<c0430860>] (drm_mode_rmfb_work_fn) from [<c01368a8>] (process_one_work+0x1f0/0x43c)
    [<c01368a8>] (process_one_work) from [<c0136d48>] (worker_thread+0x254/0x55c)
    [<c0136d48>] (worker_thread) from [<c013c014>] (kthread+0x124/0x150)
    [<c013c014>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
    Exception stack(0xeb14dfb0 to 0xeb14dff8)
    dfa0:                                     00000000 00000000 00000000 00000000
    dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
    ---[ end trace 314909bcd4c7d50c ]---
    [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:crtc-0] flip_done timed out
    [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:DSI-1] flip_done timed out
    [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] flip_done timed out

The reason for this is that there is a vblank event pending, but we
never handle it after disabling the vblank interrupts.

Check if there is an vblank event pending when disabling the display,
and clear it by sending a fake vblank event in that case.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-8-stephan@gerhold.net

drm/mcde: dsi: Enable clocks in pre_enable() instead of mode_set()

The DSI initialization sequence incorrectly assumes that the mode_set()
function of the DRM bridge is always called when (re-)enabling the display.
This is not necessarily the case.

Keeping the device idle in the framebuffer console for a while results
in the display being turned off using the disable() function. However,
as soon as any key is pressed only (pre_)enable() are called.
mode_set() is skipped because the mode has not been changed.

In this case, the DSI HS/LP clocks are never turned back on,
preventing the display from working.

Fix this by moving a part of the initialization sequence from
mode_set() to pre_enable(). Keep most of the video mode setup in
mode_set() since most of the registers are only dependent on the mode
that is set for the panel - there is no need to write them again each
time we re-enable the display.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-7-stephan@gerhold.net

drm/mcde: dsi: Fix duplicated DSI connector

Using a (single) DSI display with MCDE currently results in
two "connected" connectors:

  Connector: DSI-1
          id             : 34
          encoder id     : 0
          conn           : connected
          size           : 0x0 (mm)
          count_modes    : 0
          count_props    : 5
          props          : 1 2 5 6 4
          count_encoders : 1
          encoders       : 33
  Connector: DSI-2
          id             : 35
          encoder id     : 33
          conn           : connected
          size           : 53x89 (mm)
          count_modes    : 1
          count_props    : 5
          props          : 1 2 5 6 4
          count_encoders : 1
          encoders       : 33
    Mode: "480x800" 480x800 60

Although both show up as connected, the first one does not have
any size and no available modes. This confuses userspace tools
(e.g. kmscube) who look for available modes for the first connector.

The reason for the duplicated connector is that mcde_dsi.c and the
DRM panel bridge helper both set up a DSI connector, with more or less
the same code. The connector set up by the DRM panel bridge is the
one that is correctly set up in the example above.

Therefore we can just remove the connector setup from mcde_dsi.c
and let the DRM core handle all the hard work.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-6-stephan@gerhold.net

drm/mcde: dsi: Delay start of video stream generator

The initialization order for DSI video mode is important - if we
enable the video stream generator (VSG) before the MCDE DSI formatter
starts sending pixel data, it will immediately run into an error and
disable itself again.

Avoid this problem by delaying the activation of the VSG
until the MCDE DSI formatter is properly set up and running
(i.e. when mcde_dsi_bridge_enable() is called).

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-5-stephan@gerhold.net

drm/mcde: dsi: Make video mode errors more verbose

Triggering an error conditions in DSI video mode only results in
a very generic "some video mode error status" error message
at the moment.

Make this more clear by adding separate error messages for each bit.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-4-stephan@gerhold.net

drm/mcde: Fix frame sync setup for video mode panels

The MCDE driver differentiates only between "te_sync"
(for hardware TE0 sync) and software sync
(i.e. manually triggered updates) at the moment.

However, none of these options work correctly for video mode panels.
Therefore, we need to make some changes to make them work correctly:

  - Select hardware sync coming from the (DSI) formatter.
  - Keep the FIFO permanently enabled (otherwise MCDE will stop
    feeding data to the panel).
  - Skip manual software sync (this is not necessary in video mode).

Automatically detect if the connected panel is using video mode
and enable the necessary changes in that case.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-3-stephan@gerhold.net

drm/mcde: Provide vblank handling unconditionally

At the moment, vblank handling is only enabled together with
TE synchronization. However, the vblank IRQ is also working with
on displays without TE synchronization (e.g. DSI video mode panels).
It seems like the vblank IRQ is actually generated by the
MCDE hardware for the channel.

Therefore, the vblank handling should be working correctly in
all the cases and we can enable it unconditionally.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-2-stephan@gerhold.net

drm/rockchip: use DRM_DEV_ERROR for log output

Replace the use of the dev_err macro with the DRM_DEV_ERROR
DRM helper macro. rockchip driver uses almost exclusively DRM_* logging
(aside from 2 dev_* instances, one of which is converted in this patch),
so this makes things more consistent.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
[seanpaul expanded on the commit message]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107092945.15513-1-wambui.karugax@gmail.com

drm/udl: Remove struct udl_gem_object and functions

Simply removes all the obsolete GEM code from udl. No functional
changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107094307.19870-5-tzimmermann@suse.de

drm/udl: Switch to SHMEM

Udl's GEM code and the generic SHMEM are almost identical. Replace
the former with SHMEM. The dmabuf support in udl is being replaced
with generic GEM PRIME functions.

The main difference is in the caching flags for mmap pages. By
default, SHMEM always sets (uncached) write combining. In udl's
memory management code, only imported buffers use write combining.
Memory pages of locally created buffer objects are mmap'ed with
caching enabled. To keep the optimization, udl provides its own
mmap function for GEM objects where it fixes up the mapping flags.

v3:
- restore udl vmap that enables caching
v2:
- remove obsolete code in a separate patch

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107094307.19870-4-tzimmermann@suse.de

drm/udl: Allocate GEM object via struct drm_driver.gem_create_object

In preparation of a switch to SHMEM, udl now allocates its GEM
objects via struct drm_driver.gem_create_object. No functional
changes are made.

For SHMEM GEM objects, udl will require the use of a special mmap
function, which we set though the create-object function.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107094307.19870-3-tzimmermann@suse.de

drm/udl: Remove flags field from struct udl_gem_object

The flags field in struct udl_gem controls mapping parameters: cached
access for local buffers, write-combined access for imported buffers.

We can drop the field and distinguish both cases by testing whether
struct drm_gem_object.import_attach is NULL.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107094307.19870-2-tzimmermann@suse.de

drm/radeon: finally fix the racy VMA setup

Finally clean up the VMA setup for radeon now that TTM exports the
necessary functions.

No functional change, but only compile tested.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/339354/

drm/ttm: also export ttm_bo_vm_fault v2

That is needed by at least a cleanup in radeon.

v2: also export ttm_bo_vm_access

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/339353/

drm/ast: Enable atomic modesetting

This commit sets the remaining atomic-modesetting helpers and the flag
DRIVER_ATOMIC. Legacy cursor functions are removed in favor of the cursor
plane. For power management, atomic helpers replace the indvidual
operations that the driver currently runs.

Atomic modesetting is enabled with this commit.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-10-tzimmermann@suse.de

drm/ast: Add cursor plane

The cursor plane uses an internal format of ARGB4444. To userspace, we
announce ARGB8888 and do the transformation internally.

v2:
* don't set plane call-back functions to NULL explicitly
* define plane format array in global scope

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-9-tzimmermann@suse.de

drm/ast: Add CRTC helpers for atomic modesetting

As the CRTC code has already been prepared for a split between mode
setting and plane handling, most of the CRTC's atomic modesetting is
build upon primitives of the non-atomic implementation.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-8-tzimmermann@suse.de

drm/ast: Add primary plane

Like the original mode-setting code, the primary plane supports XRGB888,
RGB565 and C8. The plane itself only pins BOs and sets the base address
and scanline offset. The mode-setting code will be located in the CRTC's
atomic helpers.

v2:
* don't set plane call-back functions to NULL explicitly
* define plane format array in global scope

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-7-tzimmermann@suse.de

drm/ast: Split ast_set_vbios_mode_info()

The implementation of ast_set_vbios_mode() converts a DRM display mode
and framebuffer into an adjusted mode and stores information for the
video BIOS to several scratch regsiters.

Here we split the function into individual functions that do the
conversion, set the VBIOS mode information and format information.
This makes it compatible with support for primary planes and atomic
modesetting.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-6-tzimmermann@suse.de

drm/ast: Split ast_set_ext_reg() into color and threshold function

In ast_set_ext_reg() sets several framebuffer options and CRT threshold
parameters. The former is mostly state of the primary plane; the latter
is constant. Hence, split the function in two and make it work with
atomic modesetting.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-5-tzimmermann@suse.de

drm/ast: Don't clear base address and offset with default values

The content of the base-address and offset registers are state of
the primary plane. Clearing it to default values will interfere with
plane functions for atomic mode setting.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-4-tzimmermann@suse.de

drm/ast: Check video-mode requirements against VRAM size

Each video mode's primary plane requires a minimum amount of video
memory. For double buffering, this is at most half the available
VRAM. Check this constraint.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-3-tzimmermann@suse.de

drm/ast: Remove last traces of struct ast_gem_object

The ast driver has switched to struct drm_vram_gem_object a while ago.
This patch removes a function and forward declaration that were forgotten
before.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-2-tzimmermann@suse.de

drm/bridge: Add Analogix anx6345 support

The ANX6345 is an ultra-low power DisplayPower/eDP transmitter designed
for portable devices. This driver adds initial support for RGB to eDP
mode, without HPD and interrupts.

This is a configuration usually seen in eDP applications.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135220.590D968BFE@verein.lst.de

drm/bridge: Prepare Analogix anx6345 support

Add bit definitions required for the anx6345 and add a
sanity check in anx_dp_aux_transfer.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135218.01C2168C4E@verein.lst.de

drm/bridge: extract some Analogix I2C DP common code

Some code can be shared within different DP bridges by Analogix.
Extract them to analogix_dp.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135214.966BD68BFE@verein.lst.de

drm/bridge: split some definitions of ANX78xx to dedicated headers

Some definitions currently in analogix-anx78xx.h are not restricted to
the ANX78xx series, but also applicable to other DisplayPort
transmitters by Analogix.

Split out them to dedicated headers, and make analogix-anx78xx.h include
them.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135212.4D41E68BE1@verein.lst.de

drm/bridge: move ANA78xx driver to analogix subdirectory

As ANA78xx chips are designed and produced by Analogix Semiconductor,
Inc, move their driver codes into analogix subdirectory.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135202.2089C68BE1@verein.lst.de

drm/tilcdc: Provide ddc symlink in connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/
Link: https://patchwork.freedesktop.org/patch/msgid/
Link: https://patchwork.freedesktop.org/patch/msgid/

drm/mediatek: Provide ddc symlink in hdmi connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/

drm/exynos: Provide ddc symlink in connector's sysfs

Switch to using the ddc provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/

drm/msm/hdmi: Provide ddc symlink in hdmi connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/

drm: rockchip: Provide ddc symlink in inno_hdmi sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/

drm: rockchip: Provide ddc symlink in rk3066_hdmi sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/

drm/amdgpu: Provide ddc symlink in dm connector's sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/

drm/radeon: Provide ddc symlink in connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/

drm/dsi: add helpers for DSI compression mode and PPS packets

Add helper functions for sending the DSI compression mode and picture
parameter set data type packets. For the time being, limit the support
to using VESA DSC 1.1 and the default PPS. This may need updating if the
need arises for proprietary compression or non-default PPS, however keep
it simple for starters.

v2: Add missing EXPORT_SYMBOL

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-5-jani.nikula@intel.com

drm/dsi: rename MIPI_DCS_SET_PARTIAL_AREA to MIPI_DCS_SET_PARTIAL_ROWS

The DCS command has been named SET_PARTIAL_ROWS in the DCS spec since
v1.02, for more than a decade. Rename the enumeration to match the spec.

v2: add comment about the rename (David Lechner)

Cc: David Lechner <david@lechnology.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-4-jani.nikula@intel.com

drm/dsi: add missing DSI DCS commands

Update from the DCS specification.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-3-jani.nikula@intel.com

drm/dsi: add missing DSI data types

Add execute queue and compressed pixel stream packet data types for
completeness.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-2-jani.nikula@intel.com

drm/dsi: clean up DSI data type definitions

Rename picture parameter set (it's a long packet, not a long write) and
compression mode (it's not a DCS command) enumerations according to the
DSI specification. Order the types according to the spec. Use tabs
instead of spaces for indentation. Use all lower case for hex.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-1-jani.nikula@intel.com

drm: atomic helper: fix W=1 warnings

Few for_each macro set variables that are never used later which led
to generate unused-but-set-variable warnings.
Add (void)(foo) inside the macros to remove these warnings

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008124254.2144-1-benjamin.gaignard@st.com

drm/gma500: Add page flip support on psb/cdv

Legacy (non-atomic) page flip support is added to the driver by using the
mode_set_base CRTC function, that allows configuring a new framebuffer for
display. Since the function requires the primary plane's fb to be set
already, this is done prior to calling the function in the page flip helper
and reverted if the flip fails.

The vblank interrupt handler is also refactored to support passing an event.
The PIPE_TE_STATUS bit is also considered to indicate vblank on medfield
only, as explained in psb_enable_vblank.

It was tested by running weston on both poulsbo and cedartrail.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106094400.445834-3-paul.kocialkowski@bootlin.com

drm/gma500: Add missing call to allow enabling vblank on psb/cdv

This adds a missing call to drm_crtc_vblank_on to the common DPMS helper
(used by poulsbo and cedartrail), which is called in the CRTC enable path.

With that call, it becomes possible to enable vblank when needed.
It is already balanced by a drm_crtc_vblank_off call in the helper.

Other platforms (oaktrail and medfield) use a dedicated DPMS helper that
does not have the proper vblank on/off hooks. They are not added in this
commit due to lack of hardware to test it with.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106094400.445834-2-paul.kocialkowski@bootlin.com

drm/fb-helper: Remove drm_fb_helper_fbdev_{setup, teardown}()

Both functions are unused and can be removed. Drivers should use
drm_fbdev_generic_setup() instead.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106124727.11641-3-tzimmermann@suse.de

drm/todo: Convert drivers to generic fbdev emulation

This replaces the original TODO item for drm_fb_helper_fbdev_setup()
and _teardown(), which are deprecated.

v2:
* remove driver-specific comments
* list some basic requirements
* keep a TODO item on drm_fb_helper_init()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106124727.11641-2-tzimmermann@suse.de

drm/komeda: Use devm_platform_ioremap_resource() in komeda_dev_create()

Simplify this function implementation by using a known wrapper function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64a6ea39-3e4b-2ebe-74f7-98720e581e3e@web.de

drm/ttm: remove ttm_bo_wait_unreserved

With nouveau fixed all ttm-using drives have the correct nesting of
mmap_sem vs dma_resv, and we can just lock the buffer.

Assuming I didn't screw up anything with my audit of course.

v2:
- Dont forget wu_mutex (Christian König)
- Keep the mmap_sem-less wait optimization (Thomas)
- Use _lock_interruptible to be good citizens (Thomas)

v3: Rebase over fault handler helperification.

Reviewed-by: Christian König <christian.koenig@amd.com> (v2)
Reviewed-by: Thomas Hellström <thellstrom@vmware.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-3-daniel.vetter@ffwll.ch

drm/nouveau: slowpath for pushbuf ioctl

We can't copy_*_user while holding reservations, that will (soon even
for nouveau) lead to deadlocks. And it breaks the cross-driver
contract around dma_resv.

Fix this by adding a slowpath for when we need relocations, and by
pushing the writeback of the new presumed offsets to the very end.

Aside from "it compiles" entirely untested unfortunately.

Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-2-daniel.vetter@ffwll.ch

dma_resv: prime lockdep annotations

Full audit of everyone:

- i915, radeon, amdgpu should be clean per their maintainers.

- vram helpers should be fine, they don't do command submission, so
  really no business holding struct_mutex while doing copy_*_user. But
  I haven't checked them all.

- panfrost seems to dma_resv_lock only in panfrost_job_push, which
  looks clean.

- v3d holds dma_resv locks in the tail of its v3d_submit_cl_ioctl(),
  copying from/to userspace happens all in v3d_lookup_bos which is
  outside of the critical section.

- vmwgfx has a bunch of ioctls that do their own copy_*_user:
  - vmw_execbuf_process: First this does some copies in
    vmw_execbuf_cmdbuf() and also in the vmw_execbuf_process() itself.
    Then comes the usual ttm reserve/validate sequence, then actual
    submission/fencing, then unreserving, and finally some more
    copy_to_user in vmw_execbuf_copy_fence_user. Glossing over tons of
    details, but looks all safe.
  - vmw_fence_event_ioctl: No ttm_reserve/dma_resv_lock anywhere to be
    seen, seems to only create a fence and copy it out.
  - a pile of smaller ioctl in vmwgfx_ioctl.c, no reservations to be
    found there.
  Summary: vmwgfx seems to be fine too.

- virtio: There's virtio_gpu_execbuffer_ioctl, which does all the
  copying from userspace before even looking up objects through their
  handles, so safe. Plus the getparam/getcaps ioctl, also both safe.

- qxl only has qxl_execbuffer_ioctl, which calls into
  qxl_process_single_command. There's a lovely comment before the
  __copy_from_user_inatomic that the slowpath should be copied from
  i915, but I guess that never happened. Try not to be unlucky and get
  your CS data evicted between when it's written and the kernel tries
  to read it. The only other copy_from_user is for relocs, but those
  are done before qxl_release_reserve_list(), which seems to be the
  only thing reserving buffers (in the ttm/dma_resv sense) in that
  code. So looks safe.

- A debugfs file in nouveau_debugfs_pstate_set() and the usif ioctl in
  usif_ioctl() look safe. nouveau_gem_ioctl_pushbuf() otoh breaks this
  everywhere and needs to be fixed up.

v2: Thomas pointed at that vmwgfx calls dma_resv_init while it holds a
dma_resv lock of a different object already. Christian mentioned that
ttm core does this too for ghost objects. intel-gfx-ci highlighted
that i915 has similar issues.

Unfortunately we can't do this in the usual module init functions,
because kernel threads don't have an ->mm - we have to wait around for
some user thread to do this.

Solution is to spawn a worker (but only once). It's horrible, but it
works.

v3: We can allocate mm! (Chris). Horrible worker hack out, clean
initcall solution in.

v4: Annotate with __init (Rob Herring)

Cc: Rob Herring <robh@kernel.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-1-daniel.vetter@ffwll.ch

drm/doc: Update IGT documentation

The IGT documentation in this page is telling us to build it using
make. According to commit 67993c1 ("automake: Point builders at
meson") from the IGT project, this is deprecated and IGT should be
built with meson. Instead of having a documentation for IGT in this
page, point to their GitLab README, which should always be up to
date.

Signed-off-by: Leandro Ribeiro <leandrohr@riseup.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030011211.47942-1-leandrohr@riseup.net

drm/vkms: Update VKMS documentation

Small changes in the driver documentation, clarifing the description.

Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191101223735.2425-1-gabrielabittencourt00@gmail.com

drm/todo: Add entry to remove load/unload hooks

They're midlayer, broken, and because of the old gunk, we can't fix
them. For examples see the various checks in drm_mode_object.c against
dev->registered, which cannot be enforced if the driver still uses the
load hook.

Unfortunately our biggest driver still uses load/unload, so this would
be really great to get fixed.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023144953.28190-2-daniel.vetter@ffwll.ch