Staging: wlan-ng: p80211wep: fixed a block comment style issue

Fixed a comment style issue.

Signed-off-by: Gavin O'Leary <gavinoleary3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: NULL comparisons made elegant

Elegance added for NULL comparisons

Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Open parenthesis alignment style fix

Alignment of lines matched with open parenthesis

Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Coding style fix for casting operation

Removed spaces after casting operating

Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Removed blank lines after braces

Blank lines before closing braces and after opening braces
have been removed.

Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Logical continuation fixes

Logical continuation coding style issues fixed while
condition checking

Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: Fixed block comments coding style issue

All block comment lines now begin with "*" and end with "*/"
on a new line.

Signed-off-by: Pranjal Bhor <bhor.pranjal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: vt6656: Fixed multiple commenting codig style issues.

Fixed multiple comment blocks that didn't comply with the
kernels coding style.

Signed-off-by: maomao xu <albert008.xu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers:staging:vt6656: Fix coding style issues

This patch fixes the following issues reported by checkpatch.pl:
- code indent should use tabs where possible

Signed-off-by: Sergey Lysanov <lysanovsergey@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: fix definitions of DEVICE_FLAGS_* flags

test_bit and set_bit take the bit number to operate on, rather than a
mask. This patch fixes the DEVICE_FLAGS_* definitions so that they represent
the bit index in priv->flags as opposed to the mask returned by the
BIT macro.

Signed-off-by: Alexey Tulia <alexey.tulia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: mac.c replace void __iomem * with struct vnt_private

Moving void __iomem down one level in the following functions
MACbIsRegBitsOn
MACbIsRegBitsOff
MACbIsIntDisable
MACvSetShortRetryLimit
MACvSetLongRetryLimit
MACvGetLongRetryLimit
MACvSetLoopbackMode
MACvSaveContext
MACvRestoreContext
MACbSoftwareReset
MACbSafeSoftwareReset
MACbSafeRxOff
MACbSafeTxOff
MACbSafeStop
MACbShutdown
MACvInitialize
MACvSetCurrRx0DescAddr
MACvSetCurrRx1DescAddr
MACvSetCurrTXDescAddr
MACvSetCurrTx0DescAddrEx
MACvSetCurrAC0DescAddrEx
MACvSetCurrSyncDescAddrEx
MACvSetCurrATIMDescAddrEx
MACvTimer0MicroSDelay
MACvOneShotTimer1MicroSec
MACvSetMISCFifo
MACbPSWakeup
MACvSetKeyEntry
MACvDisableKeyEntry

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: PSbIsNextTBTTWakeUp Rename bWakeUp wake_up

Removing camel case.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: rf.c/h Replace DeviceContext with vnt_private

Removing void and including device.h for power.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: power.c replace pDevice with priv

Removing camel case.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: rf.c rename bResult ret.

Removing camel case and reflecting return value.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: set_channel replace bResult with ret

Removing camel case.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: set_channel replace void handler.

Replace with struct vnt_private.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: channel.c replace pDevice with priv

Removing camel case.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: use eth_broadcast_addr() in place of memset

Replace the memset of array to broadcast address 0xFF by using the
eth_broadcast_addr() API

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: use list_first_entry_or_null()

Use list_first_entry_or_null() instead of list_empty() + container_of()
to simplify the code.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: print OUI with %*ph

There is no need to pass each byte as a parameter when printing values in hex
format. We rather use %*ph specifier for that.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: replace open-coded print_hex_dump()

No need to reinvent a wheel, i.e. print_hex_dump(). Replace an open-coded
variant by generic kernel helper.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: provide an absolute path to include folder

Otherwise compiler will complain as follows

  CC [M]  drivers/staging/rtl8188eu/core/rtw_ap.o
cc1: warning: drivers/staging/rtl8188eu/include: No such file or directory [-Wmissing-include-dirs]

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: core: rtw_debug: fixed a parentheses coding style issue

Removed unnecessary parentheses.

Signed-off-by: Chris Elliott <chris@uksysadmin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove an extra space

drivers/staging/rtl8188eu/core/rtw_wlan_util.c:1377 check_assoc_AP() warn: inconsistent indenting

Signed-off-by: Alexey Tulia <alexey.tulia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_mlme_ext.c: simplify call to issue_action_BA()

Using the ternary operator allows to more concisely write the same
code, and to stay within 80 characters without even increasing the
number of lines.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rename camelcase bAcceptAddbaReq

There is such a field both in struct mlme_ext_info and in struct
registry_priv. Rename both.

Also fix checkpatch issue in the lines touched:
  WARNING: line over 80 characters

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove useless variable rtw_AcceptAddbaReq

rtw_AcceptAddbaReq is a static variable, it is set once and never
modified. It is referenced only once, to assign its value to a member
of struct registry_priv with practically the same name.

Get rid of the variable, and move the meaningful part of the comment
near the declaration of the relevant field of struct registry_priv.

Raises a new checkpatch issue, which is fixed in a later commit:
  CHECK: Avoid CamelCase: <bAcceptAddbaReq>

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: rtw_mlme_ext.c: remove commented code

This line is connented since the initial import in commit 7b464c9fa5cc
("staging: r8188eu: Add files for new driver - part 4") and there's no
comment stating how it could ever be useful.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: don't cast to void* when calling memset()

The first argument to memset() is (void *), the explicit typecasts are
not needed. They just make code less readable.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: add spaces around binary '*'

Fix checkpatch issue:
  CHECK: spaces preferred around that '*' (ctx:VxV)

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb, fix typos

The code contained typos like "structur", "fointers", etc. Fix that.

No code change, only comments.

Signed-off-by: Matej Vasek <xvasek1@fi.muni.cz>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <linux-fbdev@vger.kernel.org>
Cc: <devel@driverdev.osuosl.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers:staging:sm750fb Fix all space preferred around messages

This fixes all messages from checkpatch.pl about space preferred

Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: fix style for if clause

Fix for checkpatch.pl complaints:
ERROR: that open brace { should be on the previous line
CHECK: spaces preferred around that '+' (ctx:VxV)

Signed-off-by: Othmar Pasteka <pasteka@kabsi.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of POWER_MODE_CTRL multi-bit field

Use more straight-forward definitions for multi-bit field of
POWER_MODE_CTRL register and use open-coded implementation for register
manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for POWER_MODE_CTRL single-bit fields

Replace complex definition of POWER_MODE_CTRL register fields with BIT()
macro and use open-coded implementation for register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of MODE0_GATE multi-bit fields

Use more straight-forward definitions for multi-bit fields of MODE0_GATE
register.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for MODE0_GATE single-bit fields

Replace complex definition of MODE0_GATE register fields with BIT() macro
and use open-coded implementation for register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of CURRENT_GATE multi-bit fields

Use more straight-forward definitions for multi-bit fields of
CURRENT_GATE register and use open-coded implementation for register
manipulation.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: set{Memory, Master}Clock: rename ulReg to reg

Remove HungarianCamelCase notation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for CURRENT_GATE single-bit fields

Replace complex definition of CURRENT_GATE register fields with BIT() macro
and use open-coded implementation for register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of MISC_CTRL multi-bit fields

Use more straight-forward definitions for multi-bit fields of MISC_CTRL
register and use open-coded implementation for register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for GPIO_MUX single-bit fields

Replace complex definition of GPIO_MUX register fields with BIT() macro
and use open-coded implementation for register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: ddk750_sii164: fix defines for i2c{Read, Write}reg

For case when USE_HW_I2C is not defined, i2c{Read,Write}reg was wrongly
defined to use old function names.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for MISC_CTRL single-bit fields

Replace complex definition of MISC_CTRL register fields with BIT() macro
and use open-coded implementation for register manipulations.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: ddk750_initHw: rename ulReg to reg

Remove HungarianCamelCase notation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: change definition of SYSTEM_CTRL multi-bit fields

Use more straight-forward definitions for multi-bit fields of
SYSTEM_CTRL register and replace FIELD_GET/SET for these fields with
open-coded implementation.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for SYSTEM_CTRL single-bit fields

Replace complex definition of SYSTEM_CTRL fields and usage of
FIELD_GET/SET with BIT() macro and open-coded register value modifications

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove unused DE_STATE2_DE_RESERVED

Definition of reserved fields in a register is not interesting

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for DE_STATE2 single-bit fields

Replace complex definition of DE_STATE1 fields and usage of FIELD_GET
with BIT() macro and open-coded register value modifications

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use BIT macro for DE_STATE1 single-bit field

Replace complex definition of DE_STATE1 field and usage of FIELD_SET with
BIT() macro and open-coded register value modifications

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: hw_sm750(le)_deWait: rename dwVal to val

Remove HungarianCamelCase notation

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: lynxfb_pci_probe: remove some pr_info

Several pr_info statements in lynxfb_pci_probe seem like debug leftovers
and may be removed.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: introduce sm750fb_frambuffer_alloc

Split framebuffer allocation and registration into a dedicated function
to simplify lynxfb_pci_probe

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: introduce sm750fb_frambuffer_release

Use a function to unregister framebuffer info and release its resources.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: replace dual member of sm750_dev with fb_count

Will be used in futher refactoring of driver _probe and _remove methods.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: lynxfb_pci_remove: remove unused variable

The par variable in lynxfb_pci_remove is only assigned a value and never
used afterwards. Remove it.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: lynxfb_pci_probe: return actual errors

The lynxfb_pci_probe always returned -ENODEV in case of error. Modify it
so that actual error code will be propogated to the caller.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: disable PCI device if lynxfb_pci_probe fails

In case of error during lynxfb_pci_probe, the function returned without
calling pci_disable_device. Fix it by adding pci_disable_device on the
error cleanup path.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix Xmit Wait calculation

Total XMIT wait needs to sum the xmit wait values of all the VLs not just
those requested in the query.  Also, make the algorithm used for both
PortStatus and PortDataCounters the same.

Reviewed-by: Arthur Kepner <arthur.kepner@intel.com>
Reviewed-by: Breyer, Scott J <scott.j.breyer@intel.com>
Signed-off-by: Ira Weiny <iweiny@gmail.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Clean up comments

Clean up comments by deleting numbering and terms internal to Intel.

The information on the actual bugs is not deleted.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Edward Mascarenhas <edward.mascarenhas@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rdma: hfi1: diag: constify hfi1_filter_array structure

The hfi1_filter_array structure is never modified, so declare it as const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: add dd_dev_dbg

To be used in future patches add dd_dev_dbg.  dd_* functions properly decode
the hfi1_devdata structure used throughout the driver

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: set Gen3 half-swing for integrated devices

Correctly set half-swing for integrated devices.  A0 needs all fields set for
CcePcieCtrl.  B0 and later only need a few fields set.

Reviewed-by: Stuart Summers <john.s.summers@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: drop kbuild workaround dummy module from top dir

This is essentially a revert of 86f69fe9c069dd8608d238581eea259caa1dfc99
("Staging: workaround build system bug"), but to call it a revert would
imply it was wrong -- rather it seems more like it is just no longer
required anymore.

It doesn't list the full details of the failing use case, but the most
obvious would appear to be a "make allnoconfig" that subsequently had set
just CONFIG_STAGING=y in the .config file, to give:

  paul@builder:~/git/linux-head$ grep STAGING ../staging-allno/.config
  CONFIG_STAGING=y
  # CONFIG_STAGING_MEDIA is not set
  # CONFIG_STAGING_BOARD is not set
  paul@builder:~/git/linux-head$

After building this .config (on ARM, just to be different), we see that
built-in.o is created, and the final vmlinux links OK:

  paul@builder:~/git/linux-head$ ls -l ../staging-allno/drivers/staging/built-in.o
  -rw-rw-r-- 1 paul paul 257 Nov 16 18:06 ../staging-allno/drivers/staging/built-in.o
  paul@builder:~/git/linux-head$ file ../staging-allno/drivers/staging/built-in.o
  ../staging-allno/drivers/staging/built-in.o: ELF 32-bit LSB relocatable, ARM, version 1, not stripped
  paul@builder:~/git/linux-head$ nm ../staging-allno/drivers/staging/built-in.o
  nm: ../staging-allno/drivers/staging/built-in.o: no symbols
  paul@builder:~/git/linux-head$ ls -l ../staging-allno/vmlinux
  -rwxrwxr-x 1 paul paul 1236326 Nov 16 18:07 ../staging-allno/vmlinux
  paul@builder:~/git/linux-head$

I also tested an "allmodconfig" and did not see any problems there
either.  Switching back to x86-64 and testing several things there didn't
show any issues either.  So it appears we do not need to carry the
workaround in tree any longer.

Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

STAGING: COMEDI: Wrap line over 80 characters

This patch wraps lines over 80 characters.

Signed-off-by: Pablo G. Gallardo <pggllrd@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

STAGING: COMEDI: Remove unnecessary typecast of c90 int constant

This patch removes unnecessary typecast of c90 int constant.

Signed-off-by: Pablo G. Gallardo <pggllrd@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: add finite regeneration to dio output

This patch continues the implementation of reinterpreting stop_arg when
stop_src == TRIG_NONE for national instruments cdio output on e/m-series
devices.  This is part of a series of patches that allow a user to have a
specific buffer repeated as-is indefinitely.  The contents of the DMA
buffer can be left static or changed by the user via mmap access to the DMA
buffer.  If the contents are changed by the user, additional munging is not
performed by the driver and only a single call to
comedi_mark_buffer_written should be done.  The original behavior is
preserved when stop_arg == 0, as would be the prior use case.

As opposed to analog output, this patch is relatively simple.  First, the
digital output capabilities are much more limited/simple as compared to the
analog output device on NI e/m-series hardware, and second, this patch
relies on changes made with the earlier patch to accomplish limiting the
DMA buffer transfer.

Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: adds finite regeneration to AO output

This patch implements for analog output the reinterpretation of stop_arg
when stop_src == TRIG_NONE to allow the user to specify the length of the
buffer that should be repeated.  The intent is to allow a user to have a
specific buffer repeated as-is indefinitely.  The contents of the DMA
buffer can be left static or changed by the user via mmap access to the DMA
buffer.  If the contents are changed by the user, additional munging is not
performed by the driver and only a single call to
comedi_mark_buffer_written should be done.

Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: Cleans up/clarifies ni_ao_cmd

This patch implements ni_ao_cmd much more closely organized like NI MHDDK
examples and DAQ-STC pseudo-code.  Adds comments with some more specific
references to the DAQ-STC.

For stop_src==TRIG_NONE (continuous output mode of entire buffer), the
count for the UC counter was corrected to represent the maximum count
possible (0xffffff).  Prior behavior for stop_src=TRIG_NONE did not
actually follow the DAQ-STC.  Furthermore, stop_src==TRIG_NONE now
correctly uses code specialized for either m-series or e-series devices.

It should be noted that stop_src==TRIG_NONE does _not_ with this patch
(or with prior behavior in ni_mio_common) actually implement true
continuous output.  Rather, the output is simply configured to operate as a
single buffer output, but where the buffer is as large as is possible with
NI-STC hardware.

Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: make more bits in ao_cmd1 reg be stateful

Bits NISTC_AO_CMD1_DAC0_UPDATE_MODE and NISTC_AO_CMD1_DAC1_UPDATE_MODE are
now saved in the local copy of the AO_CMD1 register.  This is more
appropriate than prior methods of setting these bits specifically _both_
in the ni_ao_cmd configuration function _and_ the ni_ao_inttrig trigger
function.  With this patch, the bits are only specifically called out now
in the ni_ao_cmd configuration function.  In the ni_ao_inttrig trigger
function, only the UI_ARM, UC_ARM, BC_ARM bits of the ao_cmd1 register are
specifically called out.  Each of these bits is a strobe bit, while the
DAC[0-1]_UPDATE_MODE bits are simple write bits.

Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: Cleans up/clarifies ni_ao_reset

This patch implements ni_ao_reset much more closely organized like NI MHDDK
examples and DAQ-STC pseudo-code.  Adds comments with some more specific
references to the DAQ-STC.

Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: enable continuous regeneration of finite samples

This change enables the mite DMA controller to only transfer the amount of
data needed by a command.  By default, the old behavior of transferring the
entire comedi DMA data buffer is still in effect.  These changes allow a
command to only transmit a limited portion of that data buffer as needed.

This patch begins to reinterprets stop_arg when stop_src == TRIG_NONE to
allow the user to specify the length of the buffer that should be repeated.
The intent is to allow a user to have a specific buffer repeated as-is
indefinitely.  The contents of the DMA buffer can be left static or changed
by the user via mmap access to the DMA buffer.  If the contents are changed
by the user, additional munging is not performed by the driver and only a
single call to comedi_mark_buffer_written should be done.

Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: use CR_CHAN more consistently

Generally, the CR_CHAN macro is/should be used to access the relevant bits
for channel identification in cmd->*_arg when the corresponding
cmd->*_src==TRIG_EXT, including cmd->convert_arg in this case.

This patch does not fix a bug per se, as NISTC_AI_MODE1_CONVERT_SRC() already
masks the value sufficiently, but using CR_CHAN() here makes the code clearer as
it avoids passing some irrelevant bits to NISTC_AI_MODE1_CONVERT_SRC() in the
first place.

Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tiocmd: change mistaken use of start_src for start_arg

This fixes a bug in function ni_tio_input_inttrig().  The trigger number
should be compared to cmd->start_arg, not cmd->start_src.

Fixes: 6a760394d7eb ("staging: comedi: ni_tiocmd: clarify the cmd->start_arg validation and use")
Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcimio: Adds PXI-6251 to supported boards

Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt2801: Prefer using the BIT macro

As suggested by checkpatch.pl, this patch replaces bit shifting on 1 with the
BIT(x) macro.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ion:synchronize debugfs callback and ion_client_destroy

There are race condition B/T ion_client_destroy and debugfs callbacks.
Let's use a mutex to synchronize them.

Signed-off-by: Neil Zhang <neilzhang1123@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/ion: Add support to get ion handle from dma buf

Currently we can only import dma buf fd's to get ion_handle.
Adding support to import dma buf handles to support kernel
specific use cases.

An example use case is in linux platforms such as Tizen, in which
DRM-GEM is used for buffer management for graphics. It has gem_handle
corresponding to a buffer and uses gem_name for sharing the buffer
with other processes. However,it also uses dma_buf fd for 3d operations.
For wayland, there are multiple calls for gem_handle to dma_buf fd
conversion. So, we store dma_buf associated with buffer. But, there is
no api for getting ion_handle from dma_buf. This patch exposes api to
retrieve the ion handle from dma_buf for similar use cases. With this
patch, we can integrate ION within DRM-GEM for buffer management and
dma_buf sharing.

Signed-off-by: Rohit kumar <rohit.kr@samsung.com>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: remove len field from struct sync_fence_info

After removing driver_data struct sync_fence_info has now a fixed size,
thus it doesn't need any field to tell its size, it is already known.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: remove driver_data from struct sync_fence_info

It is unclear in what situations driver_data should be used thus better do
not upstream it for now. If a need arises in the future a discussion can
be started to re-add it.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: rename sync_file_info_data to sync_file_info

info_data is a bit redundant, let's keep it as only sync_file_info. It is
also smaller.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: rename sync_pt_info to sync_fence_info

As struct sync_pt doesn't exist anymore it is a good idea remove any
reference to it in the sync_framework. sync_pts were replaced directly by
fences and here we rename it to sync_fence_info to let the fence namespace
clean.

v2: rename fence_info to sync_fence_info (Maarten)

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: remove SYNC_WAIT ioctl

This ioctl is replicating the work of poll() syscall so let's take the
opportunity that this is still on staging tree and remove the duplication
and force new users to use the poll() standard interface.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: Android: memory allocation style change in ion_page_pool.c

This is a patch to ion_page_pool.c that changes a memory allocation
style issue as found by checkpatch.pl.

Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: remove sync_fence_create_dma()

With the removal of struct sync_pt sync_fence_create_dma() now takes
the same arguments as sync_fence_create() so let's keep only
sync_fence_create().

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: remove pointless sync_timeline_signal at destroy phase

All changes to timeline value come through the user via
sync_timeline_signal() calls. When sync_timeline_destroy() is called no
changes on timeline->value happens hence call sync_timeline_signal() with
no increment is pointless.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: remove unused var from sync_timeline_signal()

signaled_pts is not used in this function.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: remove struct sync_pt

struct sync_pt was just wrapping around struct fence and creating an
extra abstraction layer. The only two members of struct sync_pt, child_list
and active_list, were moved to struct fence in an earlier commit. After
removing those two members struct sync_pt is nothing more than struct
fence, so remove it all and use struct fence directly.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: rename 'sync_pt' to 'fence' in struct sync_fence_cb

'sync_pt' is actually declared as struct fence so to make the name means
its type we rename it to 'fence'.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: rename sync_fence to sync_file

sync_file has a more close meaning to what a sync_fence really, a struct
that represent a file that can be used by userspace to get information on
a fence, or wait for it to be signaled.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: move SW_SYNC_USER to a debugfs file

This remove CONFIG_SW_SYNC_USER and instead compile the sw_sync file into
debugpfs under <debugfs>/sync/sw_sync.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: create a 'sync' dir for debugfs information

Creates the 'sync' dir on debugfs root dir and move the 'sync' file
to sync/info. This is the preparation to add more debug info and control.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: remove not used sync_timeline ops

.dup and .compare are not used by the sync framework, so remove them
from sw_sync.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: sync: remove interfaces that are not used

These interfaces are not used nor have plans to be used in the near
future so remove them for a cleaner solution before de-staging the sync
framework.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: fix sync framework documentation

Updates comments about functions and structures.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

android: binder: Sanity check at binder ioctl

Sanity check at binder ioctl function,
Only allow the shared mm_struct to use the same binder-object
to do binder operate.

And add proc->vma_vm_mm = current->mm at the open function.
The libbinder do ioctl before mmap called.

V2: Fix compile error for error commit
V3: Change the condition to proc->vma_vm_mm

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Wei Dong <weidong2@hisilicon.com>
Signed-off-by: Junmin Zhao <zhaojunmin@huawei.com>
Reviewed-by: Zhuangluan Su <suzhuangluan@hisilicon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: Set the length of the DMA sg entries in buffer

ion_buffer_create() will allocate a buffer and then create a DMA
mapping for it, but it forgot to set the length of the page entries.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ion : Donnot wakeup kswapd in ion system alloc

Since ion alloc can be called by userspace,eg gralloc.
When it is called frequently, the efficiency of kswapd is
to low. And the reclaimed memory is too lower. In this way,
the kswapd can use to much cpu resources.

With 3.5GB DMA Zone and 0.5 Normal Zone.

pgsteal_kswapd_dma 9364140
pgsteal_kswapd_normal 7071043
pgscan_kswapd_dma 10428250
pgscan_kswapd_normal 37840094

With this change the reclaim ratio has greatly improved
18.9% -> 72.5%

Signed-off-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Lu bing <albert.lubing@hisilicon.com>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: android: Fix brace coding style warning in sync_debug.c

This is a patch to the sync_debug.c file that rectifies a brace warning
that was found with the checkpatch.pl tool

Signed-off-by: Bopamo Osaisai <bopamo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>