Jim Gill [Thu, 2 Aug 2018 21:13:30 +0000 (14:13 -0700)]
scsi: vmw_pvscsi: Return DID_RESET for status SAM_STAT_COMMAND_TERMINATED
Commands that are reset are returned with status
SAM_STAT_COMMAND_TERMINATED. PVSCSI currently returns DID_OK |
SAM_STAT_COMMAND_TERMINATED which fails the command. Instead, set hostbyte
to DID_RESET to allow upper layers to retry.
Tested by copying a large file between two pvscsi disks on same adapter
while performing a bus reset at 1-second intervals. Before fix, commands
sometimes fail with DID_OK. After fix, commands observed to fail with
DID_RESET.
Signed-off-by: Jim Gill <jgill@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Thu, 2 Aug 2018 17:44:42 +0000 (10:44 -0700)]
scsi: sr: Avoid that opening a CD-ROM hangs with runtime power management enabled
Surround scsi_execute() calls with scsi_autopm_get_device() and
scsi_autopm_put_device(). Note: removing sr_mutex protection from the
scsi_cd_get() and scsi_cd_put() calls is safe because the purpose of
sr_mutex is to serialize cdrom_*() calls.
This patch avoids that complaints similar to the following appear in the
kernel log if runtime power management is enabled:
INFO: task systemd-udevd:650 blocked for more than 120 seconds.
Not tainted 4.18.0-rc7-dbg+ #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
systemd-udevd D28176 650 513 0x00000104
Call Trace:
__schedule+0x444/0xfe0
schedule+0x4e/0xe0
schedule_preempt_disabled+0x18/0x30
__mutex_lock+0x41c/0xc70
mutex_lock_nested+0x1b/0x20
__blkdev_get+0x106/0x970
blkdev_get+0x22c/0x5a0
blkdev_open+0xe9/0x100
do_dentry_open.isra.19+0x33e/0x570
vfs_open+0x7c/0xd0
path_openat+0x6e3/0x1120
do_filp_open+0x11c/0x1c0
do_sys_open+0x208/0x2d0
__x64_sys_openat+0x59/0x70
do_syscall_64+0x77/0x230
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: <stable@vger.kernel.org>
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Sreekanth Reddy [Tue, 31 Jul 2018 05:36:36 +0000 (01:36 -0400)]
scsi: mpt3sas: Swap I/O memory read value back to cpu endianness
Swap the I/O memory read value back to cpu endianness before storing it in
a data structures which are defined in the MPI headers where u8 components
are not defined in the endianness order.
In this area from day one mpt3sas driver is using le32_to_cpu() &
cpu_to_le32() APIs. But in commit
cf6bf9710c
(mpt3sas: Bug fix for big endian systems) we have removed these APIs
before reading I/O memory which we should haven't done it. So
in this patch I am correcting it by adding these APIs back
before accessing I/O memory.
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Johannes Thumshirn [Tue, 31 Jul 2018 13:46:03 +0000 (15:46 +0200)]
scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO
When receiving a LOGO request we forget to clear the FC_RP_STARTED flag
before starting the rport delete routine.
As the started flag was not cleared, we're not deleting the rport but
waiting for a restart and thus are keeping the reference count of the rdata
object at 1.
This leads to the following kmemleak report:
unreferenced object 0xffff88006542aa00 (size 512):
comm "kworker/0:2", pid 24, jiffies
4294899222 (age 226.880s)
hex dump (first 32 bytes):
68 96 fe 65 00 88 ff ff 00 00 00 00 00 00 00 00 h..e............
01 00 00 00 08 00 00 00 02 c5 45 24 ac b8 00 10 ..........E$....
backtrace:
[<(____ptrval____)>] fcoe_ctlr_vn_add.isra.5+0x7f/0x770 [libfcoe]
[<(____ptrval____)>] fcoe_ctlr_vn_recv+0x12af/0x27f0 [libfcoe]
[<(____ptrval____)>] fcoe_ctlr_recv_work+0xd01/0x32f0 [libfcoe]
[<(____ptrval____)>] process_one_work+0x7ff/0x1420
[<(____ptrval____)>] worker_thread+0x87/0xef0
[<(____ptrval____)>] kthread+0x2db/0x390
[<(____ptrval____)>] ret_from_fork+0x35/0x40
[<(____ptrval____)>] 0xffffffffffffffff
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: ard <ard@kwaak.net>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Johannes Thumshirn [Tue, 31 Jul 2018 13:46:02 +0000 (15:46 +0200)]
scsi: fcoe: drop frames in ELS LOGO error path
Drop the frames in the ELS LOGO error path instead of just returning an
error.
This fixes the following kmemleak report:
unreferenced object 0xffff880064cb1000 (size 424):
comm "kworker/0:2", pid 24, jiffies
4294904293 (age 68.504s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<(____ptrval____)>] _fc_frame_alloc+0x2c/0x180 [libfc]
[<(____ptrval____)>] fc_lport_enter_logo+0x106/0x360 [libfc]
[<(____ptrval____)>] fc_fabric_logoff+0x8c/0xc0 [libfc]
[<(____ptrval____)>] fcoe_if_destroy+0x79/0x3b0 [fcoe]
[<(____ptrval____)>] fcoe_destroy_work+0xd2/0x170 [fcoe]
[<(____ptrval____)>] process_one_work+0x7ff/0x1420
[<(____ptrval____)>] worker_thread+0x87/0xef0
[<(____ptrval____)>] kthread+0x2db/0x390
[<(____ptrval____)>] ret_from_fork+0x35/0x40
[<(____ptrval____)>] 0xffffffffffffffff
which can be triggered by issuing
echo eth0 > /sys/bus/fcoe/ctlr_destroy
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Johannes Thumshirn [Tue, 31 Jul 2018 13:46:01 +0000 (15:46 +0200)]
scsi: fcoe: fix use-after-free in fcoe_ctlr_els_send
KASAN reports a use-after-free in fcoe_ctlr_els_send() when we're sending a
LOGO and have FIP debugging enabled. This is because we're first freeing
the skb and then printing the frame's DID. But the DID is a member of the
FC frame header which in turn is the skb's payload.
Exchange the debug print and kfree_skb() calls so we're not touching the
freed data.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Thu, 26 Jul 2018 21:10:37 +0000 (14:10 -0700)]
scsi: qedi: Fix a potential buffer overflow
Tell snprintf() to store at most 255 characters in the output buffer
instead of 256. This patch avoids that smatch reports the following
warning:
drivers/scsi/qedi/qedi_main.c:891: qedi_get_boot_tgt_info() error: snprintf() is printing too much 256 vs 255
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: <QLogic-Storage-Upstream@cavium.com>
Cc: <stable@vger.kernel.org>
Acked-by: Nilesh Javali <nilesh.javali@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Thu, 26 Jul 2018 23:34:44 +0000 (16:34 -0700)]
scsi: qla2xxx: Fix memory leak for allocating abort IOCB
In the case of IOCB QFull, Initiator code can leave behind a stale pointer
to an SRB structure on the outstanding command array.
Fixes: 82de802ad46e ("scsi: qla2xxx: Preparation for Target MQ.")
Cc: stable@vger.kernel.org #v4.16+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Anil Gurumurthy [Wed, 18 Jul 2018 21:29:55 +0000 (14:29 -0700)]
scsi: qla2xxx: Return error when TMF returns
Propagate the task management completion status properly to avoid
unnecessary waits for commands to complete.
Fixes: faef62d13463 ("[SCSI] qla2xxx: Fix Task Management command asynchronous handling")
Cc: <stable@vger.kernel.org>
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Wed, 18 Jul 2018 21:29:54 +0000 (14:29 -0700)]
scsi: qla2xxx: Fix ISP recovery on unload
During unload process, the chip can encounter problem where a FW dump would
be captured. For this case, the full reset sequence will be skip to bring
the chip back to full operational state.
Fixes: e315cd28b9ef ("[SCSI] qla2xxx: Code changes for qla data structure refactoring")
Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Wed, 18 Jul 2018 21:29:53 +0000 (14:29 -0700)]
scsi: qla2xxx: Fix driver unload by shutting down chip
Use chip shutdown at the start of unload to stop all DMA + traffic and
bring down the laser. This prevents any link activities from triggering the
driver to be re-engaged.
Fixes: 4b60c82736d0 ("scsi: qla2xxx: Add fw_started flags to qpair")
Cc: <stable@vger.kernel.org> #4.16
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Wed, 18 Jul 2018 21:29:52 +0000 (14:29 -0700)]
scsi: qla2xxx: Fix NPIV deletion by calling wait_for_sess_deletion
Add wait for session deletion to finish before freeing an NPIV scsi host.
Fixes: 726b85487067 ("qla2xxx: Add framework for async fabric discovery")
Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Wed, 18 Jul 2018 21:29:51 +0000 (14:29 -0700)]
scsi: qla2xxx: Fix unintialized List head crash
In case of IOCB Queue full or system where memory is low and driver
receives large number of RSCN storm, the stale sp pointer can stay on
gpnid_list resulting in page_fault.
This patch fixes this issue by initializing the sp->elem list head and
removing sp->elem before memory is freed.
Following stack trace is seen
9 [
ffff987b37d1bc60] page_fault at
ffffffffad516768 [exception RIP: qla24xx_async_gpnid+496]
10 [
ffff987b37d1bd10] qla24xx_async_gpnid at
ffffffffc039866d [qla2xxx]
11 [
ffff987b37d1bd80] qla2x00_do_work at
ffffffffc036169c [qla2xxx]
12 [
ffff987b37d1be38] qla2x00_do_dpc_all_vps at
ffffffffc03adfed [qla2xxx]
13 [
ffff987b37d1be78] qla2x00_do_dpc at
ffffffffc036458a [qla2xxx]
14 [
ffff987b37d1bec8] kthread at
ffffffffacebae31
Fixes: 2d73ac6102d9 ("scsi: qla2xxx: Serialize GPNID for multiple RSCN")
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tony Battersby [Thu, 12 Jul 2018 22:09:21 +0000 (18:09 -0400)]
scsi: sg: update comment for blk_get_request()
The calling convention of blk_get_request() has changed in lk 4.18; update
the comment in sg.c to match.
Fixes: ff005a066240 ("block: sanitize blk_get_request calling conventions")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Tony Battersby [Thu, 12 Jul 2018 20:30:45 +0000 (16:30 -0400)]
scsi: sg: fix minor memory leak in error path
Fix a minor memory leak when there is an error opening a /dev/sg device.
Fixes: cc833acbee9d ("sg: O_EXCL and other lock handling")
Cc: <stable@vger.kernel.org>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Varun Prakash [Wed, 11 Jul 2018 16:39:52 +0000 (22:09 +0530)]
scsi: libiscsi: fix possible NULL pointer dereference in case of TMF
In iscsi_check_tmf_restrictions() task->hdr is dereferenced to print the
opcode, it is possible that task->hdr is NULL.
There are two cases based on opcode argument:
1. ISCSI_OP_SCSI_CMD - In this case alloc_pdu() is called
after iscsi_check_tmf_restrictions()
iscsi_prep_scsi_cmd_pdu() -> iscsi_check_tmf_restrictions() -> alloc_pdu().
Transport drivers allocate memory for iSCSI hdr in alloc_pdu() and assign
it to task->hdr. In case of TMF task->hdr will be NULL resulting in NULL
pointer dereference.
2. ISCSI_OP_SCSI_DATA_OUT - In this case transport driver can free the
memory for iSCSI hdr after transmitting the pdu so task->hdr can be NULL or
invalid.
This patch fixes this issue by removing task->hdr->opcode from the printk
statement.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Varun Prakash [Wed, 11 Jul 2018 16:33:43 +0000 (22:03 +0530)]
scsi: target: iscsi: cxgbit: fix max iso npdu calculation
- rounddown CXGBIT_MAX_ISO_PAYLOAD by csk->emss before calculating
max_iso_npdu to get max TCP payload in multiple of mss.
- call cxgbit_set_digest() before cxgbit_set_iso_npdu() to set
csk->submode, it is used in calculating number of iso pdus.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cédric Le Goater [Thu, 5 Jul 2018 05:26:23 +0000 (07:26 +0200)]
scsi: cxlflash: fix assignment of the backend operations
commit
cd43c221bb5e ("scsi: cxlflash: Isolate external module
dependencies") introduced the use of ifdefs to avoid compilation errors
when one of the possible backend driver, CXL or OCXL, is not compiled.
Unfortunately, the wrong defines are used and the backend ops are never
assigned, leading to a kernel crash in any case when the cxlflash module is
loaded.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manish Rangankar [Tue, 3 Jul 2018 06:52:31 +0000 (23:52 -0700)]
scsi: qedi: Send driver state to MFW
In case of iSCSI offload BFS environment, MFW requires to mark virtual
link based upon qedi load status.
Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Saurav Kashyap [Thu, 5 Jul 2018 14:01:33 +0000 (07:01 -0700)]
scsi: qedf: Send the driver state to MFW
Need to notify firmware when driver is loaded and unloaded.
Signed-off-by: Saurav Kashyap <saurav.kashyap@cavium.com>
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Tue, 3 Jul 2018 22:34:48 +0000 (17:34 -0500)]
scsi: hpsa: correct enclosure sas address
The original complaint was the lsscsi -t showed the same SAS address of the
two enclosures (SEP devices). In fact the SAS address was being set to the
Enclosure Logical Identifier (ELI).
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal [Tue, 3 Jul 2018 06:23:58 +0000 (15:23 +0900)]
scsi: sd_zbc: Fix variable type and bogus comment
Fix the description of sd_zbc_check_zone_size() to correctly explain that
the returned value is a number of device blocks, not bytes. Additionally,
the 32 bits "ret" variable used in this function may truncate the 64 bits
zone_blocks variable value upon return. To fix this, change "ret" type to
s64.
Fixes: ccce20fc79 ("sd_zbc: Avoid that resetting a zone fails sporadically")
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: stable@kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Chuck Anderson [Mon, 2 Jul 2018 20:02:00 +0000 (13:02 -0700)]
scsi: qla2xxx: Fix NULL pointer dereference for fcport search
Crash dump shows following instructions
crash> bt
PID: 0 TASK:
ffffffffbe412480 CPU: 0 COMMAND: "swapper/0"
#0 [
ffff891ee0003868] machine_kexec at
ffffffffbd063ef1
#1 [
ffff891ee00038c8] __crash_kexec at
ffffffffbd12b6f2
#2 [
ffff891ee0003998] crash_kexec at
ffffffffbd12c84c
#3 [
ffff891ee00039b8] oops_end at
ffffffffbd030f0a
#4 [
ffff891ee00039e0] no_context at
ffffffffbd074643
#5 [
ffff891ee0003a40] __bad_area_nosemaphore at
ffffffffbd07496e
#6 [
ffff891ee0003a90] bad_area_nosemaphore at
ffffffffbd074a64
#7 [
ffff891ee0003aa0] __do_page_fault at
ffffffffbd074b0a
#8 [
ffff891ee0003b18] do_page_fault at
ffffffffbd074fc8
#9 [
ffff891ee0003b50] page_fault at
ffffffffbda01925
[exception RIP: qlt_schedule_sess_for_deletion+15]
RIP:
ffffffffc02e526f RSP:
ffff891ee0003c08 RFLAGS:
00010046
RAX:
0000000000000000 RBX:
0000000000000000 RCX:
ffffffffc0307847
RDX:
00000000000020e6 RSI:
ffff891edbc377c8 RDI:
0000000000000000
RBP:
ffff891ee0003c18 R8:
ffffffffc02f0b20 R9:
0000000000000250
R10:
0000000000000258 R11:
000000000000b780 R12:
ffff891ed9b43000
R13:
00000000000000f0 R14:
0000000000000006 R15:
ffff891edbc377c8
ORIG_RAX:
ffffffffffffffff CS: 0010 SS: 0018
#10 [
ffff891ee0003c20] qla2x00_fcport_event_handler at
ffffffffc02853d3 [qla2xxx]
#11 [
ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at
ffffffffc0285a1d [qla2xxx]
#12 [
ffff891ee0003de8] qla24xx_process_response_queue at
ffffffffc02a2eb5 [qla2xxx]
#13 [
ffff891ee0003e88] qla24xx_msix_rsp_q at
ffffffffc02a5403 [qla2xxx]
#14 [
ffff891ee0003ec0] __handle_irq_event_percpu at
ffffffffbd0f4c59
#15 [
ffff891ee0003f10] handle_irq_event_percpu at
ffffffffbd0f4e02
#16 [
ffff891ee0003f40] handle_irq_event at
ffffffffbd0f4e90
#17 [
ffff891ee0003f68] handle_edge_irq at
ffffffffbd0f8984
#18 [
ffff891ee0003f88] handle_irq at
ffffffffbd0305d5
#19 [
ffff891ee0003fb8] do_IRQ at
ffffffffbda02a18
--- <IRQ stack> ---
#20 [
ffffffffbe403d30] ret_from_intr at
ffffffffbda0094e
[exception RIP: unknown or invalid address]
RIP:
000000000000001f RSP:
0000000000000000 RFLAGS:
fff3b8c2091ebb3f
RAX:
ffffbba5a0000200 RBX:
0000be8cdfa8f9fa RCX:
0000000000000018
RDX:
0000000000000101 RSI:
000000000000015d RDI:
0000000000000193
RBP:
0000000000000083 R8:
ffffffffbe403e38 R9:
0000000000000002
R10:
0000000000000000 R11:
ffffffffbe56b820 R12:
ffff891ee001cf00
R13:
ffffffffbd11c0a4 R14:
ffffffffbe403d60 R15:
0000000000000001
ORIG_RAX:
ffff891ee0022ac0 CS: 0000 SS:
ffffffffffffffb9
bt: WARNING: possibly bogus exception frame
#21 [
ffffffffbe403dd8] cpuidle_enter_state at
ffffffffbd67c6fd
#22 [
ffffffffbe403e40] cpuidle_enter at
ffffffffbd67c907
#23 [
ffffffffbe403e50] call_cpuidle at
ffffffffbd0d98f3
#24 [
ffffffffbe403e60] do_idle at
ffffffffbd0d9b42
#25 [
ffffffffbe403e98] cpu_startup_entry at
ffffffffbd0d9da3
#26 [
ffffffffbe403ec0] rest_init at
ffffffffbd81d4aa
#27 [
ffffffffbe403ed0] start_kernel at
ffffffffbe67d2ca
#28 [
ffffffffbe403f28] x86_64_start_reservations at
ffffffffbe67c675
#29 [
ffffffffbe403f38] x86_64_start_kernel at
ffffffffbe67c6eb
#30 [
ffffffffbe403f50] secondary_startup_64 at
ffffffffbd0000d5
Fixes: 040036bb0bc1 ("scsi: qla2xxx: Delay loop id allocation at login")
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
himanshu.madhani@cavium.com [Mon, 2 Jul 2018 20:01:59 +0000 (13:01 -0700)]
scsi: qla2xxx: Fix kernel crash due to late workqueue allocation
This patch fixes crash for FCoE adapter. Once driver initialization is
complete, firmware will start posting Asynchronous Event, However driver
has not yet allocated workqueue to process and queue up work. This delay
of allocating workqueue results into NULL pointer access.
The following stack trace is seen:
[ 24.577259] BUG: unable to handle kernel NULL pointer dereference at
0000000000000102
[ 24.623133] PGD 0 P4D 0
[ 24.636760] Oops: 0000 [#1] SMP NOPTI
[ 24.656942] Modules linked in: i2c_algo_bit drm_kms_helper sr_mod(+) syscopyarea sysfillrect sysimgblt cdrom fb_sys_fops ata_generic ttm pata_acpi sd_mod ahci pata_atiixp sfc(+) qla2xxx(+) libahci drm qla4xxx(+) nvme_fc hpsa mdio libiscsi qlcnic(+) nvme_fabrics scsi_transport_sas serio_raw mtd crc32c_intel libata nvme_core i2c_core scsi_transport_iscsi tg3 scsi_transport_fc bnx2 iscsi_boot_sysfs dm_multipath dm_mirror dm_region_hash dm_log dm_mod
[ 24.887449] CPU: 0 PID: 177 Comm: kworker/0:3 Not tainted 4.17.0-rc6 #1
[ 24.925119] Hardware name: HP ProLiant DL385 G7, BIOS A18 08/15/2012
[ 24.962106] Workqueue: events work_for_cpu_fn
[ 24.987098] RIP: 0010:__queue_work+0x1f/0x3a0
[ 25.011672] RSP: 0018:
ffff992642ceba10 EFLAGS:
00010082
[ 25.042116] RAX:
0000000000000082 RBX:
0000000000000082 RCX:
0000000000000000
[ 25.083293] RDX:
ffff8cf9abc6d7d0 RSI:
0000000000000000 RDI:
0000000000002000
[ 25.123094] RBP:
0000000000000000 R08:
0000000000025a40 R09:
ffff8cf9aade2880
[ 25.164087] R10:
0000000000000000 R11:
ffff992642ceb6f0 R12:
ffff8cf9abc6d7d0
[ 25.202280] R13:
0000000000002000 R14:
ffff8cf9abc6d7b8 R15:
0000000000002000
[ 25.242050] FS:
0000000000000000(0000)
f9b5c00000(0000) knlGS:
0000000000000000
[ 25.977565] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 26.010457] CR2:
0000000000000102 CR3:
000000030760a000 CR4:
00000000000406f0
[ 26.051048] Call Trace:
[ 26.063572] ? __switch_to_asm+0x34/0x70
[ 26.086079] queue_work_on+0x24/0x40
[ 26.107090] qla2x00_post_work+0x81/0xb0 [qla2xxx]
[ 26.133356] qla2x00_async_event+0x1ad/0x1a20 [qla2xxx]
[ 26.164075] ? lock_timer_base+0x67/0x80
[ 26.186420] ? try_to_del_timer_sync+0x4d/0x80
[ 26.212284] ? del_timer_sync+0x35/0x40
[ 26.234080] ? schedule_timeout+0x165/0x2f0
[ 26.259575] qla82xx_poll+0x13e/0x180 [qla2xxx]
[ 26.285740] qla2x00_mailbox_command+0x74b/0xf50 [qla2xxx]
[ 26.319040] qla82xx_set_driver_version+0x13b/0x1c0 [qla2xxx]
[ 26.352108] ? qla2x00_init_rings+0x206/0x3f0 [qla2xxx]
[ 26.381733] qla2x00_initialize_adapter+0x35c/0x7f0 [qla2xxx]
[ 26.413240] qla2x00_probe_one+0x1479/0x2390 [qla2xxx]
[ 26.442055] local_pci_probe+0x3f/0xa0
[ 26.463108] work_for_cpu_fn+0x10/0x20
[ 26.483295] process_one_work+0x152/0x350
[ 26.505730] worker_thread+0x1cf/0x3e0
[ 26.527090] kthread+0xf5/0x130
[ 26.545085] ? max_active_store+0x80/0x80
[ 26.568085] ? kthread_bind+0x10/0x10
[ 26.589533] ret_from_fork+0x22/0x40
[ 26.610192] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 89 ff 41 56 41 55 41 89 fd 41 54 49 89 d4 55 48 89 f5 53 48 83 ec 0 86 02 01 00 00 01 0f 85 80 02 00 00 49 c7 c6 c0 ec 01 00 41
[ 27.308540] RIP: __queue_work+0x1f/0x3a0 RSP:
ffff992642ceba10
[ 27.341591] CR2:
0000000000000102
[ 27.360208] ---[ end trace
01b7b7ae2c005cf3 ]---
Cc: <stable@vger.kernel.org> # v4.17+
Fixes: 9b3e0f4d4147 ("scsi: qla2xxx: Move work element processing out of DPC thread"
Reported-by: Li Wang <liwang@redhat.com>
Tested-by: Li Wang <liwang@redhat.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quinn Tran [Mon, 2 Jul 2018 20:01:58 +0000 (13:01 -0700)]
scsi: qla2xxx: Fix inconsistent DMA mem alloc/free
GPNFT command allocates 2 buffer for switch query. On completion, the same
buffers were freed using different size, instead of using original size at
the time of allocation.
This patch saves the size of the request and response buffers and uses that
to free them.
Following stack trace can be seen when using debug kernel
dump_stack+0x19/0x1b
__warn+0xd8/0x100
warn_slowpath_fmt+0x5f/0x80
check_unmap+0xfb/0xa20
debug_dma_free_coherent+0x110/0x160
qla24xx_sp_unmap+0x131/0x1e0 [qla2xxx]
qla24xx_async_gnnft_done+0xb6/0x550 [qla2xxx]
qla2x00_do_work+0x1ec/0x9f0 [qla2xxx]
Cc: <stable@vger.kernel.org> # v4.17+
Fixes: 33b28357dd00 ("scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan")
Reported-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jann Horn [Mon, 25 Jun 2018 14:25:44 +0000 (16:25 +0200)]
scsi: sg: mitigate read/write abuse
As Al Viro noted in commit
128394eff343 ("sg_write()/bsg_write() is not fit
to be called under KERNEL_DS"), sg improperly accesses userspace memory
outside the provided buffer, permitting kernel memory corruption via
splice(). But it doesn't just do it on ->write(), also on ->read().
As a band-aid, make sure that the ->read() and ->write() handlers can not
be called in weird contexts (kernel context or credentials different from
file opener), like for ib_safe_file_access().
If someone needs to use these interfaces from different security contexts,
a new interface should be written that goes through the ->ioctl() handler.
I've mostly copypasted ib_safe_file_access() over as sg_safe_file_access()
because I couldn't find a good common header - please tell me if you know a
better way.
[mkp: s/_safe_/_check_/]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Raghava Aditya Renukunta [Fri, 22 Jun 2018 13:55:47 +0000 (06:55 -0700)]
scsi: aacraid: Fix PD performance regression over incorrect qd being set
The driver fails to set the correct queue depth for native devices, due to
failing to set the device type prior to calling aac_set_safw_target_qd().
This results in slave configure setting the queue depth to 1.
This causes around 30% performance degradation. Fixed by setting the dev
type before trying to set queue depth.
Reported-by: Steve Best <sbest@redhat.com>
Fixes: 0bcb45fb20c21 ("scsi: aacraid: Add helper function to set queue depth")
cc: stable@vger.kernel.org
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: David Carroll <David.Carroll@microsemi.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
David Disseldorp [Tue, 19 Jun 2018 15:58:24 +0000 (17:58 +0200)]
scsi: target: Fix truncated PR-in ReadKeys response
SPC5r17 states that the contents of the ADDITIONAL LENGTH field are not
altered based on the allocation length, so always calculate and pack the
full key list length even if the list itself is truncated.
According to Maged:
Yes it fixes the "Storage Spaces Persistent Reservation" test in the
Windows 2016 Server Failover Cluster validation suites when having
many connections that result in more than 8 registrations. I tested
your patch on 4.17 with iblock.
This behaviour can be tested using the libiscsi PrinReadKeys.Truncate test.
Cc: stable@vger.kernel.org
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Tested-by: Maged Mokhtar <mmokhtar@petasan.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Luis Henriques [Mon, 18 Jun 2018 16:08:03 +0000 (17:08 +0100)]
scsi: scsi_debug: Fix memory leak on module unload
Since commit
80c49563e250 ("scsi: scsi_debug: implement IMMED bit") there
are long delays in F_SYNC_DELAY and F_SSU_DELAY. This can cause a memory
leak in schedule_resp(), which can be invoked while unloading the
scsi_debug module: free_all_queued() had already freed all sd_dp and
schedule_resp will alloc a new one, which will never get freed. Here's the
kmemleak report while running xfstests generic/350:
unreferenced object 0xffff88007d752b00 (size 128):
comm "rmmod", pid 26940, jiffies
4295816945 (age 7.588s)
hex dump (first 32 bytes):
00 2b 75 7d 00 88 ff ff 00 00 00 00 00 00 00 00 .+u}............
00 00 00 00 00 00 00 00 8e 31 a2 34 5f 03 00 00 .........1.4_...
backtrace:
[<
000000002abd83d0>] 0xffffffffa000705e
[<
000000004c063fda>] scsi_dispatch_cmd+0xc7/0x1a0
[<
000000000c119a00>] scsi_request_fn+0x251/0x550
[<
000000009de0c736>] __blk_run_queue+0x3f/0x60
[<
000000001c4453c8>] blk_execute_rq_nowait+0x98/0xd0
[<
00000000d17ec79f>] blk_execute_rq+0x3a/0x50
[<
00000000a7654b6e>] scsi_execute+0x113/0x250
[<
00000000fd78f7cd>] sd_sync_cache+0x95/0x160
[<
0000000024dacb14>] sd_shutdown+0x9b/0xd0
[<
00000000e9101710>] sd_remove+0x5f/0xb0
[<
00000000c43f0d63>] device_release_driver_internal+0x13c/0x1f0
[<
00000000e8ad57b6>] bus_remove_device+0xe9/0x160
[<
00000000713a7b8a>] device_del+0x120/0x320
[<
00000000e5db670c>] __scsi_remove_device+0x115/0x150
[<
00000000eccbef30>] scsi_forget_host+0x20/0x60
[<
00000000cd5a0738>] scsi_remove_host+0x6d/0x120
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mikhail Malygin [Wed, 13 Jun 2018 13:05:57 +0000 (13:05 +0000)]
scsi: qla2xxx: Spinlock recursion in qla_target
The patch reverts changes done in qlt_schedule_sess_for_deletion() to
avoid spinlock recursion sess->vha->work_lock should be used instead
of ha->tgt.sess_lock, that can be locked in callers: qlt_reset() or
qlt_handle_login()
[mkp: roll in build warning reported by sfr]
Fixes: 1c6cacf4ea6c04 ("scsi: qla2xxx: Fixup locking for session deletion")
Cc: <stable@vger.kernel.org> #v4.17
Signed-off-by: Mikhail Malygin <m.malygin@yadro.com>
Reported-by: Mikhail Malygin <m.malygin@yadro.com>
Tested-by: Mikhail Malygin <m.malygin@yadro.com>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arnd Bergmann [Tue, 20 Mar 2018 02:50:05 +0000 (22:50 -0400)]
scsi: ipr: Eliminate duplicate barriers
Driver does both wmb() and writel(). The latter already has a barrier
on some architectures like arm64. This ends up with CPU observing two
barriers back to back before executing the register write.
Drivers should generally assume that the barrier implied by writel() is
sufficient for ordering DMA. Remove the extraneous wmb() before it.
[mkp: Squashed Arnd's and Sinan's patches]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
bstroesser@ts.fujitsu.com [Thu, 24 May 2018 16:49:41 +0000 (18:49 +0200)]
scsi: target: tcmu: add read length support
Generally target core and TCMUser seem to work fine for tape devices and
media changers. But there is at least one situation where TCMUser is not
able to support sequential access device emulation correctly.
The situation is when an initiator sends a SCSI READ CDB with a length that
is greater than the length of the tape block to read. We can distinguish
two subcases:
A) The initiator sent the READ CDB with the SILI bit being set.
In this case the sequential access device has to transfer the data from
the tape block (only the length of the tape block) and transmit a good
status. The current interface between TCMUser and the userspace does
not support reduction of the read data size by the userspace program.
The patch below fixes this subcase by allowing the userspace program to
specify a reduced data size in read direction.
B) The initiator sent the READ CDB with the SILI bit not being set.
In this case the sequential access device has to transfer the data from
the tape block as in A), but additionally has to transmit CHECK
CONDITION with the ILI bit set and NO SENSE in the sensebytes. The
information field in the sensebytes must contain the residual count.
With the below patch a user space program can specify the real read data
length and appropriate sensebytes. TCMUser then uses the se_cmd flag
SCF_TREAT_READ_AS_NORMAL, to force target core to transmit the real data
size and the sensebytes. Note: the flag SCF_TREAT_READ_AS_NORMAL is
introduced by Lee Duncan's patch "[PATCH v4] target: transport should
handle st FM/EOM/ILI reads" from Tue, 15 May 2018 18:25:24 -0700.
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Linus Torvalds [Sat, 16 Jun 2018 23:04:49 +0000 (08:04 +0900)]
Linux 4.18-rc1
Linus Torvalds [Sat, 16 Jun 2018 20:37:55 +0000 (05:37 +0900)]
Merge tag 'for-linus-
20180616' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes that should go into -rc1. This contains:
- bsg_open vs bsg_unregister race fix (Anatoliy)
- NVMe pull request from Christoph, with fixes for regressions in
this window, FC connect/reconnect path code unification, and a
trace point addition.
- timeout fix (Christoph)
- remove a few unused functions (Christoph)
- blk-mq tag_set reinit fix (Roman)"
* tag 'for-linus-
20180616' of git://git.kernel.dk/linux-block:
bsg: fix race of bsg_open and bsg_unregister
block: remov blk_queue_invalidate_tags
nvme-fabrics: fix and refine state checks in __nvmf_check_ready
nvme-fabrics: handle the admin-only case properly in nvmf_check_ready
nvme-fabrics: refactor queue ready check
blk-mq: remove blk_mq_tagset_iter
nvme: remove nvme_reinit_tagset
nvme-fc: fix nulling of queue data on reconnect
nvme-fc: remove reinit_request routine
blk-mq: don't time out requests again that are in the timeout handler
nvme-fc: change controllers first connect to use reconnect path
nvme: don't rely on the changed namespace list log
nvmet: free smart-log buffer after use
nvme-rdma: fix error flow during mapping request data
nvme: add bio remapping tracepoint
nvme: fix NULL pointer dereference in nvme_init_subsystem
blk-mq: reinit q->tag_set_list entry only after grace period
Linus Torvalds [Sat, 16 Jun 2018 20:25:18 +0000 (05:25 +0900)]
Merge tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental
Pull documentation fixes from Mauro Carvalho Chehab:
"This solves a series of broken links for files under Documentation,
and improves a script meant to detect such broken links (see
scripts/documentation-file-ref-check).
The changes on this series are:
- can.rst: fix a footnote reference;
- crypto_engine.rst: Fix two parsing warnings;
- Fix a lot of broken references to Documentation/*;
- improve the scripts/documentation-file-ref-check script, in order
to help detecting/fixing broken references, preventing
false-positives.
After this patch series, only 33 broken references to doc files are
detected by scripts/documentation-file-ref-check"
* tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental: (26 commits)
fix a series of Documentation/ broken file name references
Documentation: rstFlatTable.py: fix a broken reference
ABI: sysfs-devices-system-cpu: remove a broken reference
devicetree: fix a series of wrong file references
devicetree: fix name of pinctrl-bindings.txt
devicetree: fix some bindings file names
MAINTAINERS: fix location of DT npcm files
MAINTAINERS: fix location of some display DT bindings
kernel-parameters.txt: fix pointers to sound parameters
bindings: nvmem/zii: Fix location of nvmem.txt
docs: Fix more broken references
scripts/documentation-file-ref-check: check tools/*/Documentation
scripts/documentation-file-ref-check: get rid of false-positives
scripts/documentation-file-ref-check: hint: dash or underline
scripts/documentation-file-ref-check: add a fix logic for DT
scripts/documentation-file-ref-check: accept more wildcards at filenames
scripts/documentation-file-ref-check: fix help message
media: max2175: fix location of driver's companion documentation
media: v4l: fix broken video4linux docs locations
media: dvb: point to the location of the old README.dvb-usb file
...
Linus Torvalds [Sat, 16 Jun 2018 20:06:18 +0000 (05:06 +0900)]
Merge tag 'fsnotify_for_v4.18-rc1' of git://git./linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"fsnotify cleanups unifying handling of different watch types.
This is the shortened fsnotify series from Amir with the last five
patches pulled out. Amir has modified those patches to not change
struct inode but obviously it's too late for those to go into this
merge window"
* tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: add fsnotify_add_inode_mark() wrappers
fanotify: generalize fanotify_should_send_event()
fsnotify: generalize send_to_group()
fsnotify: generalize iteration of marks by object type
fsnotify: introduce marks iteration helpers
fsnotify: remove redundant arguments to handle_event()
fsnotify: use type id to identify connector object type
Linus Torvalds [Sat, 16 Jun 2018 20:00:24 +0000 (05:00 +0900)]
Merge tag 'fbdev-v4.18' of git://github.com/bzolnier/linux
Pull fbdev updates from Bartlomiej Zolnierkiewicz:
"There is nothing really major here, few small fixes, some cleanups and
dead drivers removal:
- mark omapfb drivers as orphans in MAINTAINERS file (Tomi Valkeinen)
- add missing module license tags to omap/omapfb driver (Arnd
Bergmann)
- add missing GPIOLIB dependendy to omap2/omapfb driver (Arnd
Bergmann)
- convert savagefb, aty128fb & radeonfb drivers to use msleep & co.
(Jia-Ju Bai)
- allow COMPILE_TEST build for viafb driver (media part was reviewed
by media subsystem Maintainer)
- remove unused MERAM support from sh_mobile_lcdcfb and shmob-drm
drivers (drm parts were acked by shmob-drm driver Maintainer)
- remove unused auo_k190xfb drivers
- misc cleanups (Souptick Joarder, Wolfram Sang, Markus Elfring, Andy
Shevchenko, Colin Ian King)"
* tag 'fbdev-v4.18' of git://github.com/bzolnier/linux: (26 commits)
fb_omap2: add gpiolib dependency
video/omap: add module license tags
MAINTAINERS: make omapfb orphan
video: fbdev: pxafb: match_string() conversion fixup
video: fbdev: nvidia: fix spelling mistake: "scaleing" -> "scaling"
video: fbdev: fix spelling mistake: "frambuffer" -> "framebuffer"
video: fbdev: pxafb: Convert to use match_string() helper
video: fbdev: via: allow COMPILE_TEST build
video: fbdev: remove unused sh_mobile_meram driver
drm: shmobile: remove unused MERAM support
video: fbdev: sh_mobile_lcdcfb: remove unused MERAM support
video: fbdev: remove unused auo_k190xfb drivers
video: omap: Improve a size determination in omapfb_do_probe()
video: sm501fb: Improve a size determination in sm501fb_probe()
video: fbdev-MMP: Improve a size determination in path_init()
video: fbdev-MMP: Delete an error message for a failed memory allocation in two functions
video: auo_k190x: Delete an error message for a failed memory allocation in auok190x_common_probe()
video: sh_mobile_lcdcfb: Delete an error message for a failed memory allocation in two functions
video: sh_mobile_meram: Delete an error message for a failed memory allocation in sh_mobile_meram_probe()
video: fbdev: sh_mobile_meram: Drop SUPERH platform dependency
...
Linus Torvalds [Sat, 16 Jun 2018 07:32:04 +0000 (16:32 +0900)]
Merge branch 'afs-proc' of git://git./linux/kernel/git/viro/vfs
Pull AFS updates from Al Viro:
"Assorted AFS stuff - ended up in vfs.git since most of that consists
of David's AFS-related followups to Christoph's procfs series"
* 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
afs: Optimise callback breaking by not repeating volume lookup
afs: Display manually added cells in dynamic root mount
afs: Enable IPv6 DNS lookups
afs: Show all of a server's addresses in /proc/fs/afs/servers
afs: Handle CONFIG_PROC_FS=n
proc: Make inline name size calculation automatic
afs: Implement network namespacing
afs: Mark afs_net::ws_cell as __rcu and set using rcu functions
afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus()
proc: Add a way to make network proc files writable
afs: Rearrange fs/afs/proc.c to remove remaining predeclarations.
afs: Rearrange fs/afs/proc.c to move the show routines up
afs: Rearrange fs/afs/proc.c by moving fops and open functions down
afs: Move /proc management functions to the end of the file
Linus Torvalds [Sat, 16 Jun 2018 07:21:50 +0000 (16:21 +0900)]
Merge branch 'work.compat' of git://git./linux/kernel/git/viro/vfs
Pull compat updates from Al Viro:
"Some biarch patches - getting rid of assorted (mis)uses of
compat_alloc_user_space().
Not much in that area this cycle..."
* 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
orangefs: simplify compat ioctl handling
signalfd: lift sigmask copyin and size checks to callers of do_signalfd4()
vmsplice(): lift importing iovec into vmsplice(2) and compat counterpart
Linus Torvalds [Sat, 16 Jun 2018 07:11:40 +0000 (16:11 +0900)]
Merge branch 'work.aio' of git://git./linux/kernel/git/viro/vfs
Pull aio fixes from Al Viro:
"Assorted AIO followups and fixes"
* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
eventpoll: switch to ->poll_mask
aio: only return events requested in poll_mask() for IOCB_CMD_POLL
eventfd: only return events requested in poll_mask()
aio: mark __aio_sigset::sigmask const
Linus Torvalds [Fri, 15 Jun 2018 22:39:34 +0000 (07:39 +0900)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Various netfilter fixlets from Pablo and the netfilter team.
2) Fix regression in IPVS caused by lack of PMTU exceptions on local
routes in ipv6, from Julian Anastasov.
3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia.
4) Don't crash on poll in TLS, from Daniel Borkmann.
5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things
including Avahi mDNS. From Bart Van Assche.
6) Missing of_node_put in qcom/emac driver, from Yue Haibing.
7) We lack checking of the TCP checking in one special case during SYN
receive, from Frank van der Linden.
8) Fix module init error paths of mac80211 hwsim, from Johannes Berg.
9) Handle 802.1ad properly in stmmac driver, from Elad Nachman.
10) Must grab HW caps before doing quirk checks in stmmac driver, from
Jose Abreu.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits)
net: stmmac: Run HWIF Quirks after getting HW caps
neighbour: skip NTF_EXT_LEARNED entries during forced gc
net: cxgb3: add error handling for sysfs_create_group
tls: fix waitall behavior in tls_sw_recvmsg
tls: fix use-after-free in tls_push_record
l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
mlxsw: spectrum_switchdev: Fix port_vlan refcounting
mlxsw: spectrum_router: Align with new route replace logic
mlxsw: spectrum_router: Allow appending to dev-only routes
ipv6: Only emit append events for appended routes
stmmac: added support for 802.1ad vlan stripping
cfg80211: fix rcu in cfg80211_unregister_wdev
mac80211: Move up init of TXQs
mac80211_hwsim: fix module init error paths
cfg80211: initialize sinfo in cfg80211_get_station
nl80211: fix some kernel doc tag mistakes
hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload
rds: avoid unenecessary cong_update in loop transport
l2tp: clean up stale tunnel or session in pppol2tp_connect's error path
...
Linus Torvalds [Fri, 15 Jun 2018 22:36:39 +0000 (07:36 +0900)]
Merge tag 'modules-for-v4.18' of git://git./linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Minor code cleanup and also allow sig_enforce param to be shown in
sysfs with CONFIG_MODULE_SIG_FORCE"
* tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Allow to always show the status of modsign
module: Do not access sig_enforce directly
Linus Torvalds [Fri, 15 Jun 2018 21:50:51 +0000 (06:50 +0900)]
Merge branch 'for-linus-4.18-rc1' of git://git./linux/kernel/git/rw/uml
Pull uml updates from Richard Weinberger:
"Minor updates for UML:
- fixes for our new vector network driver by Anton
- initcall cleanup by Alexander
- We have a new mailinglist, sourceforge.net sucks"
* 'for-linus-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Fix raw interface options
um: Fix initialization of vector queues
um: remove uml initcalls
um: Update mailing list address
Linus Torvalds [Fri, 15 Jun 2018 21:42:43 +0000 (06:42 +0900)]
Merge tag 'riscv-for-linus-4.18-merge_window' of git://git./linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains some small RISC-V updates I'd like to target for 4.18.
They are all fairly small this time. Here's a short summary, there's
more info in the commits/merges:
- a fix to __clear_user to respect the passed arguments.
- enough support for the perf subsystem to work with RISC-V's ISA
defined performance counters.
- support for sparse and cleanups suggested by it.
- support for R_RISCV_32 (a relocation, not the 32-bit ISA).
- some MAINTAINERS cleanups.
- the addition of CONFIG_HVC_RISCV_SBI to our defconfig, as it's
always present.
I've given these a simple build+boot test"
* tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig
RISC-V: Handle R_RISCV_32 in modules
riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't set
riscv: add riscv-specific predefines to CHECKFLAGS
riscv: split the declaration of __copy_user
riscv: no __user for probe_kernel_address()
riscv: use NULL instead of a plain 0
perf: riscv: Add Document for Future Porting Guide
perf: riscv: preliminary RISC-V support
MAINTAINERS: Update Albert's email, he's back at Berkeley
MAINTAINERS: Add myself as a maintainer for SiFive's drivers
riscv: Fix the bug in memory access fixup code
Linus Torvalds [Fri, 15 Jun 2018 21:37:04 +0000 (06:37 +0900)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"Mostly the PPC part of the release, but also switching to Arnd's fix
for the hyperv config issue and a typo fix.
Main PPC changes:
- reimplement the MMIO instruction emulation
- transactional memory support for PR KVM
- improve radix page table handling"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (63 commits)
KVM: x86: VMX: redo fix for link error without CONFIG_HYPERV
KVM: x86: fix typo at kvm_arch_hardware_setup comment
KVM: PPC: Book3S PR: Fix failure status setting in tabort. emulation
KVM: PPC: Book3S PR: Enable use on POWER9 bare-metal hosts in HPT mode
KVM: PPC: Book3S PR: Don't let PAPR guest set MSR hypervisor bit
KVM: PPC: Book3S PR: Fix failure status setting in treclaim. emulation
KVM: PPC: Book3S PR: Fix MSR setting when delivering interrupts
KVM: PPC: Book3S PR: Handle additional interrupt types
KVM: PPC: Book3S PR: Enable kvmppc_get/set_one_reg_pr() for HTM registers
KVM: PPC: Book3S: Remove load/put vcpu for KVM_GET_REGS/KVM_SET_REGS
KVM: PPC: Remove load/put vcpu for KVM_GET/SET_ONE_REG ioctl
KVM: PPC: Move vcpu_load/vcpu_put down to each ioctl case in kvm_arch_vcpu_ioctl
KVM: PPC: Book3S PR: Enable HTM for PR KVM for KVM_CHECK_EXTENSION ioctl
KVM: PPC: Book3S PR: Support TAR handling for PR KVM HTM
KVM: PPC: Book3S PR: Add guard code to prevent returning to guest with PR=0 and Transactional state
KVM: PPC: Book3S PR: Add emulation for tabort. in privileged state
KVM: PPC: Book3S PR: Add emulation for trechkpt.
KVM: PPC: Book3S PR: Add emulation for treclaim.
KVM: PPC: Book3S PR: Restore NV regs after emulating mfspr from TM SPRs
KVM: PPC: Book3S PR: Always fail transactions in guest privileged state
...
Linus Torvalds [Fri, 15 Jun 2018 21:35:02 +0000 (06:35 +0900)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"virtio, vhost: features, fixes
- PCI virtual function support for virtio
- DMA barriers for virtio strong barriers
- bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: update the comments for transport features
virtio_pci: support enabling VFs
vhost: fix info leak due to uninitialized memory
virtio_ring: switch to dma_XX barriers for rpmsg
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:34:32 +0000 (12:34 -0300)]
fix a series of Documentation/ broken file name references
As files move around, their previous links break. Fix the
references for them.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:33:06 +0000 (12:33 -0300)]
Documentation: rstFlatTable.py: fix a broken reference
The old HOWTO was removed a long time ago. The flat table
version is not metioned elsewhere, so just get rid of the
text.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:32:05 +0000 (12:32 -0300)]
ABI: sysfs-devices-system-cpu: remove a broken reference
This file doesn't exist anymore:
Documentation/cpu-freq/user-guide.txt
As the ABI already points to Documentation/cpu-freq, just
remove the broken link and the associated text.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:30:30 +0000 (12:30 -0300)]
devicetree: fix a series of wrong file references
As files got renamed, their references broke.
Manually fix a series of broken refs at the DT bindings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 15:24:41 +0000 (12:24 -0300)]
devicetree: fix name of pinctrl-bindings.txt
Rename:
pinctrl-binding.txt -> pinctrl-bindings.txt
In order to match the current name of this file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 12:39:01 +0000 (09:39 -0300)]
devicetree: fix some bindings file names
There were some file movements that changed the location for
some DT bindings. Fix them with:
scripts/documentation-file-ref-check --fix
After manually checking if the new file makes sense.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 11:59:37 +0000 (08:59 -0300)]
MAINTAINERS: fix location of DT npcm files
The specified locations are not right. Fix the wildcard logic
to point to the correct directories.
Without that, get-maintainer won't get things right:
$ ./scripts/get_maintainer.pl --no-git-fallback --no-r --no-n --no-l -f Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
mark.rutland@arm.com (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
After the patch, it will properly point to NPCM arch maintainers:
$ ./scripts/get_maintainer.pl --no-git-fallback --no-r --no-n --no-l -f Documentation/devicetree/bindings/arm/cpu-enable-method/nuvoton,npcm750-smp
avifishman70@gmail.com (supporter:ARM/NUVOTON NPCM ARCHITECTURE)
tmaimon77@gmail.com (supporter:ARM/NUVOTON NPCM ARCHITECTURE)
robh+dt@kernel.org (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
mark.rutland@arm.com (maintainer:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS)
Cc: Avi Fishman <avifishman70@gmail.com>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Cc: Patrick Venture <venture@google.com>
Cc: Nancy Yuen <yuenn@google.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 11:01:00 +0000 (08:01 -0300)]
MAINTAINERS: fix location of some display DT bindings
Those files got a manufacturer's name prepended and were moved around.
Adjust their references accordingly.
Also, due those movements, Documentation/devicetree/bindings/video
doesn't exist anymore.
Cc: David Airlie <airlied@linux.ie>
Cc: David Lechner <david@lechnology.com>
Cc: Peter Senna Tschudin <peter.senna@collabora.com>
Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Alison Wang <alison.wang@nxp.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:43:07 +0000 (07:43 -0300)]
kernel-parameters.txt: fix pointers to sound parameters
The alsa parameters file was renamed to alsa-configuration.rst.
With regards to OSS, it got retired as a hole by at changeset
727dede0ba8a ("sound: Retire OSS"). So, it doesn't make sense
to keep mentioning it at kernel-parameters.txt.
Fixes: 727dede0ba8a ("sound: Retire OSS")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:18:45 +0000 (07:18 -0300)]
bindings: nvmem/zii: Fix location of nvmem.txt
The location pointed there is missing "bindings/" on its path.
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Tue, 8 May 2018 18:14:57 +0000 (15:14 -0300)]
docs: Fix more broken references
As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix
Manually checked that produced results are valid.
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 14:06:08 +0000 (11:06 -0300)]
scripts/documentation-file-ref-check: check tools/*/Documentation
Some files, like tools/memory-model/README has references to
a Documentation file that is locale to it. Handle references
that are relative to them too.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 13:47:29 +0000 (10:47 -0300)]
scripts/documentation-file-ref-check: get rid of false-positives
Now that the number of broken refs are smaller, improve the logic
that gets rid of false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 13:14:54 +0000 (10:14 -0300)]
scripts/documentation-file-ref-check: hint: dash or underline
Sometimes, people use dash instead of underline or vice-versa.
Try to autocorrect it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 12:36:35 +0000 (09:36 -0300)]
scripts/documentation-file-ref-check: add a fix logic for DT
There are several links broken due to DT file movements. Add
a hint logic to seek for those changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:48:22 +0000 (07:48 -0300)]
scripts/documentation-file-ref-check: accept more wildcards at filenames
at MAINTAINERS, some filename paths use '?' and things like [7,9].
So, accept more wildcards, in order to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:11:02 +0000 (07:11 -0300)]
scripts/documentation-file-ref-check: fix help message
The name of the --fix option was renamed, but it was not
changed at the quick help message.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Thu, 14 Jun 2018 10:34:51 +0000 (07:34 -0300)]
media: max2175: fix location of driver's companion documentation
There's a missing ".rst" at the doc's file name.
Acked-by: Ramesh Shanmugasundaram <Ramesh.shanmugasundaram@bp.renesas.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Tue, 8 May 2018 22:41:44 +0000 (19:41 -0300)]
media: v4l: fix broken video4linux docs locations
There are several places pointing to old documentation files:
Documentation/video4linux/API.html
Documentation/video4linux/bttv/
Documentation/video4linux/cx2341x/fw-encoder-api.txt
Documentation/video4linux/m5602.txt
Documentation/video4linux/v4l2-framework.txt
Documentation/video4linux/videobuf
Documentation/video4linux/Zoran
Make them point to the new location where available, removing
otherwise.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Tue, 8 May 2018 21:29:30 +0000 (18:29 -0300)]
media: dvb: point to the location of the old README.dvb-usb file
This file got renamed, but the references still point to the
old place.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Tue, 8 May 2018 21:10:05 +0000 (18:10 -0300)]
media: dvb: fix location of get_dvb_firmware script
This script was moved out of Documentation/dvb, but the
links weren't updated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Tue, 8 May 2018 18:14:57 +0000 (15:14 -0300)]
docs: Fix some broken references
As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix
Manually checked if the produced result is valid, removing a few
false-positives.
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Tue, 8 May 2018 21:54:36 +0000 (18:54 -0300)]
docs: fix broken references with multiple hints
The script:
./scripts/documentation-file-ref-check --fix
Gives multiple hints for broken references on some files.
Manually use the one that applies for some files.
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: James Morris <james.morris@microsoft.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Jose Abreu [Fri, 15 Jun 2018 15:17:27 +0000 (16:17 +0100)]
net: stmmac: Run HWIF Quirks after getting HW caps
Currently we were running HWIF quirks before getting HW capabilities.
This is not right because some HWIF callbacks depend on HW caps.
Lets save the quirks callback and use it in a later stage.
This fixes Altera socfpga.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Fixes: 5f0456b43140 ("net: stmmac: Implement logic to automatically select HW Interface")
Reported-by: Dinh Nguyen <dinh.linux@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Vitor Soares <soares@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roopa Prabhu [Wed, 13 Jun 2018 04:26:10 +0000 (21:26 -0700)]
neighbour: skip NTF_EXT_LEARNED entries during forced gc
Commit
9ce33e46531d ("neighbour: support for NTF_EXT_LEARNED flag")
added support for NTF_EXT_LEARNED for neighbour entries.
NTF_EXT_LEARNED entries are neigh entries managed by control
plane (eg: Ethernet VPN implementation in FRR routing suite).
Periodic gc already excludes these entries. This patch extends
it to forced gc which the earlier patch missed.
Fixes: 9ce33e46531d ("neighbour: support for NTF_EXT_LEARNED flag")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhouyang Jia [Fri, 15 Jun 2018 03:06:17 +0000 (11:06 +0800)]
net: cxgb3: add error handling for sysfs_create_group
When sysfs_create_group fails, the lack of error-handling code may
cause unexpected results.
This patch adds error-handling code after calling sysfs_create_group.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Jun 2018 16:14:31 +0000 (09:14 -0700)]
Merge branch 'tls-fixes'
Daniel Borkmann says:
====================
Two tls fixes
First one is syzkaller trigered uaf and second one noticed
while writing test code with tls ulp. For details please see
individual patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 15 Jun 2018 01:07:46 +0000 (03:07 +0200)]
tls: fix waitall behavior in tls_sw_recvmsg
Current behavior in tls_sw_recvmsg() is to wait for incoming tls
messages and copy up to exactly len bytes of data that the user
provided. This is problematic in the sense that i) if no packet
is currently queued in strparser we keep waiting until one has been
processed and pushed into tls receive layer for tls_wait_data() to
wake up and push the decrypted bits to user space. Given after
tls decryption, we're back at streaming data, use sock_rcvlowat()
hint from tcp socket instead. Retain current behavior with MSG_WAITALL
flag and otherwise use the hint target for breaking the loop and
returning to application. This is done if currently no ctx->recv_pkt
is ready, otherwise continue to process it from our strparser
backlog.
Fixes: c46234ebb4d1 ("tls: RX path for ktls")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 15 Jun 2018 01:07:45 +0000 (03:07 +0200)]
tls: fix use-after-free in tls_push_record
syzkaller managed to trigger a use-after-free in tls like the
following:
BUG: KASAN: use-after-free in tls_push_record.constprop.15+0x6a2/0x810 [tls]
Write of size 1 at addr
ffff88037aa08000 by task a.out/2317
CPU: 3 PID: 2317 Comm: a.out Not tainted 4.17.0+ #144
Hardware name: LENOVO 20FBCTO1WW/20FBCTO1WW, BIOS N1FET47W (1.21 ) 11/28/2016
Call Trace:
dump_stack+0x71/0xab
print_address_description+0x6a/0x280
kasan_report+0x258/0x380
? tls_push_record.constprop.15+0x6a2/0x810 [tls]
tls_push_record.constprop.15+0x6a2/0x810 [tls]
tls_sw_push_pending_record+0x2e/0x40 [tls]
tls_sk_proto_close+0x3fe/0x710 [tls]
? tcp_check_oom+0x4c0/0x4c0
? tls_write_space+0x260/0x260 [tls]
? kmem_cache_free+0x88/0x1f0
inet_release+0xd6/0x1b0
__sock_release+0xc0/0x240
sock_close+0x11/0x20
__fput+0x22d/0x660
task_work_run+0x114/0x1a0
do_exit+0x71a/0x2780
? mm_update_next_owner+0x650/0x650
? handle_mm_fault+0x2f5/0x5f0
? __do_page_fault+0x44f/0xa50
? mm_fault_error+0x2d0/0x2d0
do_group_exit+0xde/0x300
__x64_sys_exit_group+0x3a/0x50
do_syscall_64+0x9a/0x300
? page_fault+0x8/0x30
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This happened through fault injection where aead_req allocation in
tls_do_encryption() eventually failed and we returned -ENOMEM from
the function. Turns out that the use-after-free is triggered from
tls_sw_sendmsg() in the second tls_push_record(). The error then
triggers a jump to waiting for memory in sk_stream_wait_memory()
resp. returning immediately in case of MSG_DONTWAIT. What follows is
the trim_both_sgl(sk, orig_size), which drops elements from the sg
list added via tls_sw_sendmsg(). Now the use-after-free gets triggered
when the socket is being closed, where tls_sk_proto_close() callback
is invoked. The tls_complete_pending_work() will figure that there's
a pending closed tls record to be flushed and thus calls into the
tls_push_pending_closed_record() from there. ctx->push_pending_record()
is called from the latter, which is the tls_sw_push_pending_record()
from sw path. This again calls into tls_push_record(). And here the
tls_fill_prepend() will panic since the buffer address has been freed
earlier via trim_both_sgl(). One way to fix it is to move the aead
request allocation out of tls_do_encryption() early into tls_push_record().
This means we don't prep the tls header and advance state to the
TLS_PENDING_CLOSED_RECORD before allocation which could potentially
fail happened. That fixes the issue on my side.
Fixes: 3c4d7559159b ("tls: kernel TLS support")
Reported-by: syzbot+5c74af81c547738e1684@syzkaller.appspotmail.com
Reported-by: syzbot+709f2810a6a05f11d4d3@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Jun 2018 16:12:37 +0000 (09:12 -0700)]
Merge branch 'l2tp-l2tp_ppp-must-ignore-non-PPP-sessions'
Guillaume Nault says:
====================
l2tp: l2tp_ppp must ignore non-PPP sessions
The original L2TP code was written for version 2 of the protocol, which
could only carry PPP sessions. Then L2TPv3 generalised the protocol so that
it could transport different kinds of pseudo-wires. But parts of the
l2tp_ppp module still break in presence of non-PPP sessions.
Assuming L2TPv2 tunnels can only transport PPP sessions is right, but
l2tp_netlink failed to ensure that (fixed in patch 1).
When retrieving a session from an arbitrary tunnel, l2tp_ppp needs to
filter out non-PPP sessions (last occurrence fixed in patch 2).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Fri, 15 Jun 2018 13:39:19 +0000 (15:39 +0200)]
l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl()
pppol2tp_tunnel_ioctl() can act on an L2TPv3 tunnel, in which case
'session' may be an Ethernet pseudo-wire.
However, pppol2tp_session_ioctl() expects a PPP pseudo-wire, as it
assumes l2tp_session_priv() points to a pppol2tp_session structure. For
an Ethernet pseudo-wire l2tp_session_priv() points to an l2tp_eth_sess
structure instead, making pppol2tp_session_ioctl() access invalid
memory.
Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault [Fri, 15 Jun 2018 13:39:17 +0000 (15:39 +0200)]
l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels
The /proc/net/pppol2tp handlers (pppol2tp_seq_*()) iterate over all
L2TPv2 tunnels, and rightfully expect that only PPP sessions can be
found there. However, l2tp_netlink accepts creating Ethernet sessions
regardless of the underlying tunnel version.
This confuses pppol2tp_seq_session_show(), which expects that
l2tp_session_priv() returns a pppol2tp_session structure. When the
session is an Ethernet pseudo-wire, a struct l2tp_eth_sess is returned
instead. This leads to invalid memory access when
pppol2tp_session_get_sock() later tries to dereference ps->sk.
Fixes: d9e31d17ceba ("l2tp: Add L2TP ethernet pseudowire support")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Jun 2018 16:11:17 +0000 (09:11 -0700)]
Merge branch 'mlxsw-IPv6-and-reference-counting-fixes'
Ido Schimmel says:
====================
mlxsw: IPv6 and reference counting fixes
The first three patches fix a mismatch between the new IPv6 behavior
introduced in commit
f34436a43092 ("net/ipv6: Simplify route replace and
appending into multipath route") and mlxsw. The patches allow the driver
to support multipathing in IPv6 overlays with GRE tunnel devices. A
selftest will be submitted when net-next opens.
The last patch fixes a reference count problem of the port_vlan struct.
I plan to simplify the code in net-next, so that reference counting is
not necessary anymore.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Fri, 15 Jun 2018 13:23:38 +0000 (16:23 +0300)]
mlxsw: spectrum_switchdev: Fix port_vlan refcounting
Switchdev notifications for addition of SWITCHDEV_OBJ_ID_PORT_VLAN are
distributed not only on clean addition, but also when flags on an
existing VLAN are changed. mlxsw_sp_bridge_port_vlan_add() calls
mlxsw_sp_port_vlan_get() to get at the port_vlan in question, which
implicitly references the object. This then leads to discrepancies in
reference counting when the VLAN is removed. spectrum.c warns about the
problem when the module is removed:
[13578.493090] WARNING: CPU: 0 PID: 2454 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2973 mlxsw_sp_port_remove+0xfd/0x110 [mlxsw_spectrum]
[...]
[13578.627106] Call Trace:
[13578.629617] mlxsw_sp_fini+0x2a/0xe0 [mlxsw_spectrum]
[13578.634748] mlxsw_core_bus_device_unregister+0x3e/0x130 [mlxsw_core]
[13578.641290] mlxsw_pci_remove+0x13/0x40 [mlxsw_pci]
[13578.646238] pci_device_remove+0x31/0xb0
[13578.650244] device_release_driver_internal+0x14f/0x220
[13578.655562] driver_detach+0x32/0x70
[13578.659183] bus_remove_driver+0x47/0xa0
[13578.663134] pci_unregister_driver+0x1e/0x80
[13578.667486] mlxsw_sp_module_exit+0xc/0x3fa [mlxsw_spectrum]
[13578.673207] __x64_sys_delete_module+0x13b/0x1e0
[13578.677888] ? exit_to_usermode_loop+0x78/0x80
[13578.682374] do_syscall_64+0x39/0xe0
[13578.685976] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix by putting the port_vlan when mlxsw_sp_port_vlan_bridge_join()
determines it's a flag-only change.
Fixes: b3529af6bb0d ("spectrum: Reference count VLAN entries")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 15 Jun 2018 13:23:37 +0000 (16:23 +0300)]
mlxsw: spectrum_router: Align with new route replace logic
Commit
f34436a43092 ("net/ipv6: Simplify route replace and appending
into multipath route") changed the IPv6 route replace logic so that the
first matching route (i.e., same metric) is replaced.
Have mlxsw replace the first matching route as well.
Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 15 Jun 2018 13:23:36 +0000 (16:23 +0300)]
mlxsw: spectrum_router: Allow appending to dev-only routes
Commit
f34436a43092 ("net/ipv6: Simplify route replace and appending
into multipath route") changed the IPv6 route append logic so that
dev-only routes can be appended and not only gatewayed routes.
Align mlxsw with the new behaviour.
Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 15 Jun 2018 13:23:35 +0000 (16:23 +0300)]
ipv6: Only emit append events for appended routes
Current code will emit an append event in the FIB notification chain for
any route added with NLM_F_APPEND set, even if the route was not
appended to any existing route.
This is inconsistent with IPv4 where such an event is only emitted when
the new route is appended after an existing one.
Align IPv6 behavior with IPv4, thereby allowing listeners to more easily
handle these events.
Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 15 Jun 2018 16:08:26 +0000 (09:08 -0700)]
Merge tag 'mac80211-for-davem-2018-06-15' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A handful of fixes:
* missing RCU grace period enforcement led to drivers freeing
data structures before; fix from Dedy Lansky.
* hwsim module init error paths were messed up; fixed it myself
after a report from Colin King (who had sent a partial patch)
* kernel-doc tag errors; fix from Luca Coelho
* initialize the on-stack sinfo data structure when getting
station information; fix from Sven Eckelmann
* TXQ state dumping is now done from init, and when TXQs aren't
initialized yet at that point, bad things happen, move the
initialization; fix from Toke Høiland-Jørgensen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Elad Nachman [Fri, 15 Jun 2018 06:57:39 +0000 (09:57 +0300)]
stmmac: added support for 802.1ad vlan stripping
stmmac reception handler calls stmmac_rx_vlan() to strip the vlan before
calling napi_gro_receive().
The function assumes VLAN tagged frames are always tagged with
802.1Q protocol, and assigns ETH_P_8021Q to the skb by hard-coding
the parameter on call to __vlan_hwaccel_put_tag() .
This causes packets not to be passed to the VLAN slave if it was created
with 802.1AD protocol
(ip link add link eth0 eth0.100 type vlan proto 802.1ad id 100).
This fix passes the protocol from the VLAN header into
__vlan_hwaccel_put_tag() instead of using the hard-coded value of
ETH_P_8021Q.
NETIF_F_HW_VLAN_STAG_RX check was added and the strip action is now
dependent on the correct combination of features and the detected vlan tag.
NETIF_F_HW_VLAN_STAG_RX feature was added to be in line with the driver
actual abilities.
Signed-off-by: Elad Nachman <eladn@gilat.com>
Reviewed-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mauro Carvalho Chehab [Wed, 9 May 2018 02:44:08 +0000 (23:44 -0300)]
arch/*: Kconfig: fix documentation for NMI watchdog
Changeset
9919cba7ff71 ("watchdog: Update documentation") updated
the documentation, removing the old nmi_watchdog.txt and adding
a file with a new content.
Update Kconfig files accordingly.
Fixes: 9919cba7ff71 ("watchdog: Update documentation")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Sun, 6 May 2018 17:30:09 +0000 (14:30 -0300)]
docs: crypto_engine.rst: Fix two parse warnings
./Documentation/crypto/crypto_engine.rst:13: WARNING: Unexpected indentation.
./Documentation/crypto/crypto_engine.rst:15: WARNING: Block quote ends without a blank line; unexpected unindent.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Mauro Carvalho Chehab [Sun, 6 May 2018 15:00:11 +0000 (12:00 -0300)]
docs: can.rst: fix a footnote reference
As stated at:
http://www.sphinx-doc.org/en/master/usage/restructuredtext/basics.html#footnotes
A footnote should contain either a number, a reference or
an auto number, e. g.:
[1], [#f1] or [#].
While using [*] accidentaly works for html, it fails for other
document outputs. In particular, it causes an error with LaTeX
output, causing all books after networking to not be built.
So, replace it by a valid syntax.
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
David Howells [Fri, 15 Jun 2018 14:24:50 +0000 (15:24 +0100)]
afs: Optimise callback breaking by not repeating volume lookup
At the moment, afs_break_callbacks calls afs_break_one_callback() for each
separate FID it was given, and the latter looks up the volume individually
for each one.
However, this is inefficient if two or more FIDs have the same vid as we
could reuse the volume. This is complicated by cell aliasing whereby we
may have multiple cells sharing a volume and can therefore have multiple
callback interests for any particular volume ID.
At the moment afs_break_one_callback() scans the entire list of volumes
we're getting from a server and breaks the appropriate callback in every
matching volume, regardless of cell. This scan is done for every FID.
Optimise callback breaking by the following means:
(1) Sort the FID list by vid so that all FIDs belonging to the same volume
are clumped together.
This is done through the use of an indirection table as we cannot do
an insertion sort on the afs_callback_break array as we decode FIDs
into it as we subsequently also have to decode callback info into it
that corresponds by array index only.
We also don't really want to bubblesort afterwards if we can avoid it.
(2) Sort the server->cb_interests array by vid so that all the matching
volumes are grouped together. This permits the scan to stop after
finding a record that has a higher vid.
(3) When breaking FIDs, we try to keep server->cb_break_lock as long as
possible, caching the start point in the array for that volume group
as long as possible.
It might make sense to add another layer in that list and have a
refcounted volume ID anchor that has the matching interests attached
to it rather than being in the list. This would allow the lock to be
dropped without losing the cursor.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 15 Jun 2018 14:19:22 +0000 (15:19 +0100)]
afs: Display manually added cells in dynamic root mount
Alter the dynroot mount so that cells created by manipulation of
/proc/fs/afs/cells and /proc/fs/afs/rootcell and by specification of a root
cell as a module parameter will cause directories for those cells to be
created in the dynamic root superblock for the network namespace[*].
To this end:
(1) Only one dynamic root superblock is now created per network namespace
and this is shared between all attempts to mount it. This makes it
easier to find the superblock to modify.
(2) When a dynamic root superblock is created, the list of cells is walked
and directories created for each cell already defined.
(3) When a new cell is added, if a dynamic root superblock exists, a
directory is created for it.
(4) When a cell is destroyed, the directory is removed.
(5) These directories are created by calling lookup_one_len() on the root
dir which automatically creates them if they don't exist.
[*] Inasmuch as network namespaces are currently supported here.
Signed-off-by: David Howells <dhowells@redhat.com>
David Howells [Fri, 15 Jun 2018 14:19:10 +0000 (15:19 +0100)]
afs: Enable IPv6 DNS lookups
Remove the restriction on DNS lookup upcalls that prevents ipv6 addresses
from being looked up.
Signed-off-by: David Howells <dhowells@redhat.com>
Anatoliy Glagolev [Wed, 13 Jun 2018 21:38:51 +0000 (15:38 -0600)]
bsg: fix race of bsg_open and bsg_unregister
The existing implementation allows races between bsg_unregister and
bsg_open paths. bsg_unregister and request_queue cleanup and deletion
may start and complete right after bsg_get_device (in bsg_open path)
retrieves bsg_class_device and releases the mutex. Then bsg_open path
touches freed memory of bsg_class_device and request_queue.
One possible fix is to hold the mutex all the way through bsg_get_device
instead of releasing it after bsg_class_device retrieval.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-Off-By: Anatoliy Glagolev <glagolig@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Fri, 15 Jun 2018 11:55:07 +0000 (13:55 +0200)]
block: remov blk_queue_invalidate_tags
This function is entirely unused, so remove it and the tag_queue_busy
member of struct request_queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Fri, 15 Jun 2018 14:11:05 +0000 (08:11 -0600)]
Merge branch 'nvme-4.18' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes from Christoph:
"Fix various little regressions introduced in this merge window, plus
a rework of the fibre channel connect and reconnect path to share the
code instead of having separate sets of bugs. Last but not least a
trivial trace point addition from Hannes."
* 'nvme-4.18' of git://git.infradead.org/nvme:
nvme-fabrics: fix and refine state checks in __nvmf_check_ready
nvme-fabrics: handle the admin-only case properly in nvmf_check_ready
nvme-fabrics: refactor queue ready check
blk-mq: remove blk_mq_tagset_iter
nvme: remove nvme_reinit_tagset
nvme-fc: fix nulling of queue data on reconnect
nvme-fc: remove reinit_request routine
nvme-fc: change controllers first connect to use reconnect path
nvme: don't rely on the changed namespace list log
nvmet: free smart-log buffer after use
nvme-rdma: fix error flow during mapping request data
nvme: add bio remapping tracepoint
nvme: fix NULL pointer dereference in nvme_init_subsystem
Dedy Lansky [Fri, 15 Jun 2018 11:05:01 +0000 (13:05 +0200)]
cfg80211: fix rcu in cfg80211_unregister_wdev
Callers of cfg80211_unregister_wdev can free the wdev object
immediately after this function returns. This may crash the kernel
because this wdev object is still in use by other threads.
Add synchronize_rcu() after list_del_rcu to make sure wdev object can
be safely freed.
Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Toke Høiland-Jørgensen [Fri, 25 May 2018 12:29:21 +0000 (14:29 +0200)]
mac80211: Move up init of TXQs
On init, ieee80211_if_add() dumps the interface. Since that now includes a
dump of the TXQ state, we need to initialise that before the dump happens.
So move up the TXQ initialisation to to before the call to
ieee80211_if_add().
Fixes: 52539ca89f36 ("cfg80211: Expose TXQ stats and parameters to userspace")
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Johannes Berg [Tue, 29 May 2018 10:04:51 +0000 (12:04 +0200)]
mac80211_hwsim: fix module init error paths
We didn't free the workqueue on any errors, nor did we
correctly check for rhashtable allocation errors, nor
did we free the hashtable on error.
Reported-by: Colin King <colin.king@canonical.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Sven Eckelmann [Wed, 6 Jun 2018 08:53:55 +0000 (10:53 +0200)]
cfg80211: initialize sinfo in cfg80211_get_station
Most of the implementations behind cfg80211_get_station will not initialize
sinfo to zero before manipulating it. For example, the member "filled",
which indicates the filled in parts of this struct, is often only modified
by enabling certain bits in the bitfield while keeping the remaining bits
in their original state. A caller without a preinitialized sinfo.filled can
then no longer decide which parts of sinfo were filled in by
cfg80211_get_station (or actually the underlying implementations).
cfg80211_get_station must therefore take care that sinfo is initialized to
zero. Otherwise, the caller may tries to read information which was not
filled in and which must therefore also be considered uninitialized. In
batadv_v_elp_get_throughput's case, an invalid "random" expected throughput
may be stored for this neighbor and thus the B.A.T.M.A.N V algorithm may
switch to non-optimal neighbors for certain destinations.
Fixes: 7406353d43c8 ("cfg80211: implement cfg80211_get_station cfg80211 API")
Reported-by: Thomas Lauer <holminateur@gmail.com>
Reported-by: Marcel Schmidt <ff.z-casparistrasse@mailbox.org>
Cc: b.a.t.m.a.n@lists.open-mesh.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Luca Coelho [Fri, 8 Jun 2018 07:04:47 +0000 (10:04 +0300)]
nl80211: fix some kernel doc tag mistakes
There is a bunch of tags marking constants with &, which means struct
or enum name. Replace them with %, which is the correct tag for
constants.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Christoph Hellwig [Mon, 11 Jun 2018 15:41:11 +0000 (17:41 +0200)]
nvme-fabrics: fix and refine state checks in __nvmf_check_ready
- make sure we only allow internally generates commands in any non-live
state
- only allow connect commands on non-live queues when actually in the
new or connecting states
- treat all other non-live, non-dead states the same as a default
cach-all
This fixes a regression where we could not shutdown a controller
orderly as we didn't allow the internal generated Property Set
command, and also ensures we don't accidentally let a Connect command
through in the wrong state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
projects / openwrt / staging / blogic.git / log