drm/ttm: use RCU in ttm_bo_flush_all_fences

This allows it to call the function without the lock held.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Link: https://patchwork.freedesktop.org/patch/352742/

drm/ttm: cleanup ttm_buffer_object_transfer

The function is always called with deleted BOs.

While at it cleanup the indentation as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Link: https://patchwork.freedesktop.org/patch/352743/

drm/ttm: refine ghost BO resv criteria

Ghost BOs need to stick with the resv object only when the origin is imported.

This is a low hanging fruit to avoid OOM situations on evictions.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Link: https://patchwork.freedesktop.org/patch/352740/

drm/qxl: add drm_driver.release callback.

Move final cleanups to qxl_drm_release() callback.
Add drm_atomic_helper_shutdown() call to qxl_pci_remove().

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20200210113753.5614-3-kraxel@redhat.com

drm/qxl: reorder calls in qxl_device_fini().

Reorder calls in qxl_device_fini().  Cleaning up gem & ttm
might trigger qxl commands, so we should do that before
releaseing command rings.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20200210113753.5614-2-kraxel@redhat.com

drm/omap: fix possible object reference leak

The call to of_find_matching_node returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:212:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function.
drivers/gpu/drm/omapdrm/dss/omapdss-boot-init.c:237:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 209, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: Markus Elfring <Markus.Elfring@web.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1554692313-28882-2-git-send-email-wen.yang99@zte.com.cn

drm/omap: dmm_tiler: Remove the dma_async_issue_pending() call

dma_sync_wait() is calling it so no need to call it in the driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731094233.13890-3-peter.ujfalusi@ti.com

drm/omap: dmm_tiler: Use dmaengine_prep_dma_memcpy() for i878 workaround

Instead of dma_dev->device_prep_dma_memcpy() use the existing macro to
prepare the memcpy.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731094233.13890-2-peter.ujfalusi@ti.com

drm/omapdrm: Fix trivial spelling

Fix trivial spelling identified while examining the code.

s/supprted./supported./

Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209123320.10186-1-kieran.bingham+renesas@ideasonboard.com

drm/omap: use true,false for bool variable

Fixes coccicheck warning:

drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c:681:1-15: WARNING: Assignment of 0/1 to bool variable
drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c:732:1-15: WARNING: Assignment of 0/1 to bool variable

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1579763123-62749-1-git-send-email-zhengbin13@huawei.com

drm/bridge: tfp410: add pclk limits

Add pixel clock limits to the driver as per TFP410 datasheet: min 25MHz,
max 165MHz.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121094655.9092-1-tomi.valkeinen@ti.com

drm/virtio: move virtio_gpu_mem_entry initialization to new function

Introduce new virtio_gpu_object_shmem_init() helper function which will
create the virtio_gpu_mem_entry array, containing the backing storage
information for the host.  For the most path this just moves code from
virtio_gpu_object_attach().

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200207074638.26386-5-kraxel@redhat.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>

drm/virtio: move mapping teardown to virtio_gpu_cleanup_object()

Stop sending DETACH_BACKING commands, that will happening anyway when
releasing resources via UNREF.  Handle guest-side cleanup in
virtio_gpu_cleanup_object(), called when the host finished processing
the UNREF command.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200207074638.26386-4-kraxel@redhat.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>

drm/virtio: resource teardown tweaks

Add new virtio_gpu_cleanup_object() helper function for object cleanup.
Wire up callback function for resource unref, do cleanup from callback
when we know the host stopped using the resource.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200207074638.26386-3-kraxel@redhat.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>

drm/virtio: simplify virtio_gpu_alloc_cmd

Just call virtio_gpu_alloc_cmd_resp with some fixed args
instead of duplicating most of the function body.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200207074638.26386-2-kraxel@redhat.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>

drm/bochs: deinit bugfix

Check whenever mode_config was actually properly
initialized before trying to clean it up.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20200207124348.21641-1-kraxel@redhat.com

drm/bridge: panel: Fix typo in drm_panel_bridge_add docs

Fix the 'manged' typo with 'managed' in the drm_panel_bridge_add
kernel-doc documentation.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218121223.30181-1-enric.balletbo@collabora.com

drm/bridge/synopsys: dsi: missing post disable

Sometime the post_disable function is missing (not registered).

Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1579602296-7683-1-git-send-email-yannick.fertre@st.com

drm/bridge: sii902x: Select SND_SOC_HDMI_CODEC if SND_SOC is configured

To enable HDMI audio the SND_SOC_HDMI_CODEC needs to be
configured. Enable HDMI audio by selecting SND_SOC_HDMI_CODEC if
SND_SOC is configured. SND_SOC_HDMI_CODEC has no config menu entry and
should be selected automatically by the drivers using it.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[narmstrong: atomatically -> automatically]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191129152342.29145-1-jsarha@ti.com

drm/bridge: Add tc358768 driver

Add basic support for the Toshiba TC358768 RGB to DSI bridge.
Not all the features of the TC358768 is implemented by the initial driver:
MIPI_DSI_MODE_VIDEO and MIPI_DSI_FMT_RGB888 is only supported and tested.

Only write is implemented for mipi_dsi_host_ops.transfer.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200131111553.472-3-peter.ujfalusi@ti.com

dt-bindings: display: bridge: Add documentation for Toshiba tc358768

TC358768/TC358778 is a Parallel RGB to MIPI DSI bridge.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200131111553.472-2-peter.ujfalusi@ti.com

dt-bindings: drm: bridge: adv7511: Add ADV7535 support

ADV7535 is a part compatible with ADV7533 but it supports 1080p@60hz and
v1p2 supply is fixed to 1.8V

Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121082719.27972-4-bogdan.togorean@analog.com

drm: bridge: adv7511: Add support for ADV7535

ADV7535 is a DSI to HDMI bridge chip like ADV7533 but it allows
1080p@60Hz. v1p2 is fixed to 1.8V on ADV7535.

Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121082719.27972-3-bogdan.togorean@analog.com

drm: bridge: adv7511: Remove DRM_I2C_ADV7533 Kconfig

This commit remove DRM_I2C_ADV7533 resulting a simpler driver and less
choices in Kconfig.

Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121082719.27972-2-bogdan.togorean@analog.com

drm/udl: Clear struct drm_connector_funcs.dpms

Atomic modesetting doesn't use struct drm_connector_funcs.dpms and
the set function, drm_helper_connector_dpms(), wouldn't support it
anyway. So keep the pointer to NULL.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207141602.4760-2-tzimmermann@suse.de

drm/bochs: Clear struct drm_connector_funcs.dpms

Atomic modesetting doesn't use struct drm_connector_funcs.dpms and
the set function, drm_helper_connector_dpms(), wouldn't support it
anyway. So keep the pointer to NULL.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200207141602.4760-1-tzimmermann@suse.de

drm/tiny/st7735r: No need to set ->owner for spi_register_driver()

The spi_register_driver() will set the ->owner member to THIS_MODULE.

Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200131204923.48928-4-andriy.shevchenko@linux.intel.com

drm/tiny/st7735r: Make driver OF-independent

There is one OF call in the driver that limits its area of use.
Replace it to generic device_get_match_data() and get rid of OF dependency.

Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200131204923.48928-3-andriy.shevchenko@linux.intel.com

drm/tiny/repaper: No need to set ->owner for spi_register_driver()

The spi_register_driver() will set the ->owner member to THIS_MODULE.

Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200131204923.48928-2-andriy.shevchenko@linux.intel.com

drm/tiny/repaper: Make driver OF-independent

There is one OF call in the driver that limits its area of use.
Replace it to generic device_get_match_data() and get rid of OF dependency.

While here, cast SPI driver data to certain enumerator type.

Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200131204923.48928-1-andriy.shevchenko@linux.intel.com

drm/tiny: add support for tft displays based on ilitek,ili9486

This adds support fot ilitek,ili9486 based displays with shift register
in front of controller.
Ozzmaker,Piscreen and Waveshare,rpi-lcd-35 are such displays.

Acked-by: Sam Ravnborg <sam@ravnborg.org> (v4)
Reviewed-by: Noralf Tronnes <noralf@tronnes.org> (v4)
Signed-off-by: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/a9c8065c3ef7707650630b3b21a0c01d725fc5a0.1581270802.git.kamlesh.gurudasani@gmail.com

dt-bindings: add binding for tft displays based on ilitek,ili9486

This binding is for the tft displays based on ilitek,ili9486.
ozzmaker,piscreen and waveshare,rpi-lcd-35 are such displays

Signed-off-by: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/8938c7a53598db793bbcddf205dcf35bcc19a18e.1581270802.git.kamlesh.gurudasani@gmail.com

dt-bindings: panel: Convert orisetech,otm8009a to json-schema

Convert orisetech,otm8009a to json-schema.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206133344.724-4-benjamin.gaignard@st.com

dt-bindings: panel: Convert raydium,rm68200 to json-schema

Convert raydium,rm68200 to json-schema.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200206133344.724-3-benjamin.gaignard@st.com

dt-bindings: one file of all simple DSI panels

To complement panel-simple.yaml, create panel-simple-dsi.yaml.
panel-simple-dsi-yaml are for all simple DSP panels with a single
power-supply and optional backlight / enable GPIO.

Migrate panasonic,vvx10f034n00 over to the new file.

The objectives with one file for all the simple DSI panels are:
    - Make it simpler to add bindings for simple DSI panels
    - Keep the number of bindings file lower
    - Keep the binding documentation for simple DSI panels more consistent

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200206133344.724-2-benjamin.gaignard@st.com

drm/virtio: fix ring free check

If the virtio device supports indirect ring descriptors we need only one
ring entry for the whole command.  Take that into account when checking
whenever the virtqueue has enough free entries for our command.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200207064653.14403-1-kraxel@redhat.com

drm/virtio: move virtqueue_notify into virtio_gpu_queue_ctrl_sgs

It becomes clear that virtio_gpu_queue_fenced_ctrl_buffer should be
responsible for setting up sgs and virtio_gpu_queue_ctrl_sgs should
be responsible for queuing sgs.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200205181955.202485-11-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: move the check for vqs_ready earlier

When vqs_ready is false, vq should be considered invalid and we
should not check vq->num_free.  After this change, a fenced command
queued before the vqs are ready will have fence id 0 and will be
considered done.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200205181955.202485-9-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: move locking into virtio_gpu_queue_ctrl_sgs

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200205181955.202485-8-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: set up virtqueue sgs before locking

sgs setup does not need to be in the critical section.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200205181955.202485-7-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: unlock object array on errors

We don't propagate erros to the callers.  We have to unlock object
arrays on errors.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200205181955.202485-6-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: no need to pass virtio_gpu_ctrl_hdr

We can get it from vbuf.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200205181955.202485-5-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: add virtio_gpu_vbuf_ctrl_hdr

It is a helper to return the virtio_gpu_ctrl_hdr in a vbuf.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200205181955.202485-4-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: remove incorrect ENOSPC check

The handling of virtqueue_add_sgs ENOSPC error is incorrect because
it can result in out-of-order virtqueue_add_sgs and break fences.
We never get ENOSPC anyway because the caller waits until there is
enough space (the other caller that did not wait was removed in
commit 32d6c2c5b522 ("drm/virtio: Rewrite virtio_gpu_queue_ctrl_buffer
using fenced version.")).  Remove the incorrect and unnecessary error
path.

This also adds a WARN_ON(ret) until we properly handle errors.

Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Cc: David Riley <davidriley@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200205181955.202485-3-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: fix a wait_event condition

outcnt may be greater than 1 since commit e1218b8c0cc1 ("drm/virtio:
Use vmalloc for command buffer allocations.").

Fixes: e1218b8c0cc1 ("drm/virtio: Use vmalloc for command buffer allocations.")
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Cc: David Riley <davidriley@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200205181955.202485-2-olvaffe@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: ratelimit error logging

Avoid flooding the log in case we screw up badly.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200205102552.21409-1-kraxel@redhat.com

drm/vboxvideo: Implement struct drm_mode_config_funcs.mode_valid

The implementation of struct drm_mode_config_funcs.mode_valid verifies
that enough video memory is available for a given display mode.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200203155258.9346-5-tzimmermann@suse.de

drm/hibmc: Implement struct drm_mode_config_funcs.mode_valid

The implementation of struct drm_mode_config_funcs.mode_valid verifies
that enough video memory is available for a given display mode.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200203155258.9346-4-tzimmermann@suse.de

drm/bochs: Implement struct drm_mode_config_funcs.mode_valid

The implementation of struct drm_mode_config_funcs.mode_valid verifies
that enough video memory is available for a given display mode. This
replaces similar functionality in bochs_connector_mode_valid().

v2:
* remove bochs_connector_mode_valid(), which now serves no purpose

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200203155258.9346-3-tzimmermann@suse.de

drm/vram: Add helpers to validate a display mode's memory requirements

Devices with low amount of dedicated video memory may not be able
to use all possible display modes, as the framebuffers may not fit
into VRAM. The new helper function drm_vram_helper_mode_valid()
implements a simple test to sort out all display modes that can
not be used in any case. Drivers should call this function from
struct drm_mode_config_funcs.mode_valid.

The functionality was originally implemented by the ast driver, which
is being converted as well.

v2:
* WARN_ON if VRAM memory manager has not been initialized
* documentation fixes
* unexported drm_vram_helper_mode_valid_internal()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200203155258.9346-2-tzimmermann@suse.de

drm/virtio: fix vblank handling

virtio has its own commit fail function.  Add the
drm_atomic_helper_fake_vblank() call there.

Fixes: 2a735ad3d211 ("drm/virtio: Remove sending of vblank event")
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20200205065312.15790-1-kraxel@redhat.com

drm: Remove the dma_alloc_coherent wrapper for internal usage

Internally for "consistent" maps, we create a temporary struct
drm_dma_handle in order to use our own dma_alloc_coherent wrapper then
destroy the temporary wrap. Simplify our logic by removing the temporary
wrapper!

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202171635.4039044-2-chris@chris-wilson.co.uk

drm: Remove PageReserved manipulation from drm_pci_alloc

drm_pci_alloc/drm_pci_free are very thin wrappers around the core dma
facilities, and we have no special reason within the drm layer to behave
differently. In particular, since

commit de09d31dd38a50fdce106c15abd68432eebbd014
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date:   Fri Jan 15 16:51:42 2016 -0800

    page-flags: define PG_reserved behavior on compound pages

    As far as I can see there's no users of PG_reserved on compound pages.
    Let's use PF_NO_COMPOUND here.

it has been illegal to combine GFP_COMP with SetPageReserved, so lets
stop doing both and leave the dma layer to its own devices.

Reported-by: Taketo Kabe
Bug: https://gitlab.freedesktop.org/drm/intel/issues/1027
Fixes: de09d31dd38a ("page-flags: define PG_reserved behavior on compound pages")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.5+
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202171635.4039044-1-chris@chris-wilson.co.uk

drm/stm: dsi: stm mipi dsi doesn't print error on probe deferral

Change DSI driver to not print an error trace when probe
is deferred for a clock resource.

Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1579602245-7577-1-git-send-email-yannick.fertre@st.com

drm/stm: ltdc: check crtc state before enabling LIE

Following investigations of a hardware bug, the LIE interrupt
can occur while the display controller is not activated.
LIE interrupt (vblank) don't have to be set if the CRTC is not
enabled.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1579601650-7055-1-git-send-email-yannick.fertre@st.com

drm/stm: ltdc: add number of interrupts

The number of interrupts depends on the ltdc version.
Don't try to get interrupt which not exist, avoiding
kernel warning messages.

Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1579601632-7001-1-git-send-email-yannick.fertre@st.com

MAINTAINERS: Add Thomas as drm-misc co-maintainer

Daniel asked me to serve as co-maintainer of the drm-misc tree.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200130120643.5759-1-tzimmermann@suse.de

drm/panel: simple: Fix the lt089ac29000 bus_format

The lt089ac29000 panel is an LVDS panel, not a DPI one. Fix the
definition to reflect this fact.

v10:
* Add changelog to the commit message

v8 -> v9:
* No changes

v7:
* New patch

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-12-boris.brezillon@collabora.com

drm/imx: pd: Use bus format/flags provided by the bridge when available

Now that bridges can expose the bus format/flags they expect, we can
use those instead of the relying on the display_info provided by the
connector (which is only valid if the encoder is directly connected
to bridge element driving the panel/display).

We also explicitly expose the bus formats supported by our encoder by
filling encoder->output_bus_caps with proper info.

v10:
* Add changelog to the commit message
* Use kmalloc() instead of kcalloc()
* Add a dev_warn() when unsupported flags are requested

v8 -> v9:
* No changes

v7:
* Add an imx_pd_format_supported() helper (suggested by Philipp)
* Simplify imx_pd_bridge_atomic_get_output_bus_fmts() (suggested by Philipp)
* Simplify imx_pd_bridge_atomic_get_input_bus_fmts()
* Explicitly set the duplicate/destro_state() and reset() hooks

v4 -> v6:
* Patch was not part of the series

v3 (all suggested by Philipp):
* Adjust to match core changes
* Propagate output format to input format
* Pick a default value when output_fmt = _FIXED
* Add missing BGR888 and GBR888 fmts to imx_pd_bus_fmts[]

v2:
* Adjust things to match the new bus-format negotiation infra

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-8-boris.brezillon@collabora.com

drm/bridge: Add the necessary bits to support bus format negotiation

drm_bridge_state is extended to describe the input and output bus
configurations. These bus configurations are exposed through the
drm_bus_cfg struct which encodes the configuration of a physical
bus between two components in an output pipeline, usually between
two bridges, an encoder and a bridge, or a bridge and a connector.

The bus configuration is stored in drm_bridge_state separately for
the input and output buses, as seen from the point of view of each
bridge. The bus configuration of a bridge output is usually identical
to the configuration of the next bridge's input, but may differ if
the signals are modified between the two bridges, for instance by an
inverter on the board. The input and output configurations of a
bridge may differ if the bridge modifies the signals internally,
for instance by performing format conversion, or*modifying signals
polarities.

Bus format negotiation is automated by the core, drivers just have
to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they
want to take part to this negotiation. Negotiation happens in reverse
order, starting from the last element of the chain (the one directly
connected to the display) up to the first element of the chain (the one
connected to the encoder).
During this negotiation all supported formats are tested until we find
one that works, meaning that the formats array should be in decreasing
preference order (assuming the driver has a preference order).

Note that the bus format negotiation works even if some elements in the
chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks.
In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets
the previous bridge element decide what to do (most of the time, bridge
drivers will pick a default bus format or extract this piece of
information from somewhere else, like a FW property).

v10:
* Add changelog to the commit message

v9:
* No changes

v8:
* Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by
  Jonas)

v7:
* Adapt the code to deal with the fact that not all bridges in the
  chain have a bridge state

v5 -> v6:
* No changes

v4:
* Enhance the doc
* Fix typos
* Rename some parameters/fields
* Reword the commit message

v3:
* Fix the commit message (Reported by Laurent)
* Document the fact that bus formats should not be directly modified by
  drivers (Suggested by Laurent)
* Document the fact that format order matters (Suggested by Laurent)
* Propagate bus flags by default
* Document the fact that drivers can tweak bus flags if needed
* Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format
  array (Suggested by Laurent)
* Add a drm_atomic_helper_bridge_propagate_bus_fmt()
* Mandate that bridge drivers return accurate input_fmts even if they
  are known to be the first element in the bridge chain

v2:
* Rework things to support more complex use cases

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format]
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-7-boris.brezillon@collabora.com

drm/bridge: Add an ->atomic_check() hook

So that bridge drivers have a way to check/reject an atomic operation.
The drm_atomic_bridge_chain_check() (which is just a wrapper around
the ->atomic_check() hook) is called in place of
drm_bridge_chain_mode_fixup() (when ->atomic_check() is not implemented,
the core falls back on ->mode_fixup(), so the behavior should stay
the same for existing bridge drivers).

v10:
* Add changelog to the commit message

v8 -> v9:
* No changes

v7:
* Fix a NULL pointer dereference

v5 -> v6:
* No changes

v4:
* Add R-bs

v3:
* No changes

v2:
* Clarify the fact that ->atomic_check() is replacing ->mode_fixup()

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-6-boris.brezillon@collabora.com

drm/bridge: Patch atomic hooks to take a drm_bridge_state

This way the drm_bridge_funcs interface is consistent with the rest of
the subsystem.

The drivers implementing those hooks are patched too.

v10:
* Add changelog to the commit message

v8 -> v9:
* No changes

v7:
* Adjust things to the bridge_state changes

v6:
* Also fixed rcar-du/rcar_lvds.c same as analogix/analogix_dp_core.c

v5:
* No changes

v4:
* Rename func params into old_bridge_state
* Add Laurent's Rb

v3:
* Old state clarification moved to a separate patch

v2:
* Pass the old bridge state

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: renamed state as old_bridge_state in rcar_lvds_atomic_disable]
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-5-boris.brezillon@collabora.com

drm/bridge: analogix: Plug atomic state hooks to the default implementation

This is needed to pass a bridge state to all atomic hooks, if we don't
do that, the core can't duplicate/create bridge states.

v10:
* Add changelog to the commit message

v9:
* Add Neil's R-b
* Move earlier in the series

v8:
* No changes

v7:
* New patch

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-4-boris.brezillon@collabora.com

drm/rcar-du: Plug atomic state hooks to the default implementation

This is needed to pass a bridge state to all atomic hooks, if we don't
do that, the core can't duplicate/create bridge states.

v10:
* Add changelog to the commit message

v9:
* Add Neil's R-b
* Move earlier in the series

v8:
* No changes

v7:
* New patch

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-3-boris.brezillon@collabora.com

drm/bridge: Add a drm_bridge_state object

One of the last remaining objects to not have its atomic state.

This is being motivated by our attempt to support runtime bus-format
negotiation between elements of the bridge chain.
This patch just paves the road for such a feature by adding a new
drm_bridge_state object inheriting from drm_private_obj so we can
re-use some of the existing state initialization/tracking logic.

v10:
* Add changelog to the commit message

v9:
* Clarify the fact that the bridge->atomic_reset() and
  {connector,plane,crtc,...}->reset() semantics are different
* Move the drm_atomic_private_obj_init() call back to
  drm_bridge_attach()
* Check the presence of ->atomic_duplicate_state instead of
  ->atomic_reset in drm_atomic_add_encoder_bridges()
* Fix copy&paste errors in the atomic bridge state helpers doc
* Add A-b/R-b tags

v8:
* Move bridge state helpers out of the CONFIG_DEBUGFS section

v7:
* Move helpers, struct-defs, ... to atomic helper files to avoid the
  drm -> drm_kms_helper -> drm circular dep
* Stop providing default implementation for atomic state reset,
  duplicate and destroy hooks (has to do with the helper/core split)
* Drop all R-b/T-b as helpers have now be moved to other places

v6:
* Made helpers private, removed doc and moved them to satisfy dependencies
* Renamed helpers to _default_

v5:
* Re-introduced the helpers from v4

v4:
* Fix the doc
* Kill default helpers (inlined)
* Fix drm_atomic_get_bridge_state() to check for an ERR_PTR()
* Add Neil's R-b

v3:
* No changes

v2:
* Use drm_for_each_bridge_in_chain()
* Rename helpers to be more consistent with the rest of the DRM API
* Improve/fix the doc

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-2-boris.brezillon@collabora.com

drm/panel: Add Samsung s6e88a0-ams452ef01 panel driver

Add driver for Samsung AMS452EF01 AMOLED panel, which makes
use of their S6E88A0 controller.

Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed checkpatch warnings, added changelog]
Link: https://patchwork.freedesktop.org/patch/msgid/20200130203555.316-2-michael.srba@seznam.cz

dt-bindings: display/panel: add bindings for S6E88A0-AMS452EF01

This patch adds dts bindings for Samsung AMS452EF01 AMOLED panel,
which makes use of their S6E88A0 controller.

Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed syntax and updated example to fix warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20200130203555.316-1-michael.srba@seznam.cz

drm/panel: simple: Add EDT panel support

EDT ET043080DH6-GP is a 4.3" WQVGA 480x272 RGB LCD panel used on the iWave
Generic SODIMM Development Platform.

Changes in v2:
-added mandatory .connector_type field
-changed the .bus_format MEDIA_BUS_FMT_RGB666_1X18

Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1580386118-22895-3-git-send-email-marian-cristian.rotariu.rb@bp.renesas.com

dt-bindings: display: Add bindings for EDT panel

Document the Emerging Display Technology Corp. (EDT) ETM043080DH6-GP
display, which is a 480x272 4.3" TFT display with capacitive touchscreen.

Changes in v2:
-modify proper bindings file

Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1580386118-22895-2-git-send-email-marian-cristian.rotariu.rb@bp.renesas.com

drm/xen: Explicitly disable automatic sending of vblank event

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. This would apply to xen, but xen has
its own vblank logic. To avoid interfering with the atomic helpers,
disable automatic vblank events explicitly.

v5:
* update comment
v4:
* separate commit from core vblank changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-16-tzimmermann@suse.de

drm/virtio: Remove sending of vblank event

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.

v4:
* separate commit from core vblank changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-15-tzimmermann@suse.de

drm/vboxvideo: Remove sending of vblank event

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.

v4:
* separate commit from core vblank changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-14-tzimmermann@suse.de

drm/udl: Don't set struct drm_crtc_state.no_vblank explicitly

As udl does not initialize vblanking, atomic helpers initialize the
value of struct drm_crtc_state.no_vblank to be true. No need to set
it from within the driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-13-tzimmermann@suse.de

drm/st7586: Remove sending of vblank event

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.

v4:
* separate commit from core vblank changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-12-tzimmermann@suse.de

drm/repaper: Remove sending of vblank event

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.

v4:
* separate commit from core vblank changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-11-tzimmermann@suse.de

drm/qxl: Remove sending of vblank event

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.

v4:
* separate commit from core vblank changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-10-tzimmermann@suse.de

drm/mipi-dbi: Remove sending of vblank event

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.

v4:
* separate commit from core vblank changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-9-tzimmermann@suse.de

drm/ili9225: Remove sending of vblank event

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.

v4:
* separate commit from core vblank changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-8-tzimmermann@suse.de

drm/gm12u320: Remove sending of vblank event

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.

v4:
* separate commit from core vblank changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-7-tzimmermann@suse.de

drm/cirrus: Remove sending of vblank event

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.

v4:
* separate commit from core vblank changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-6-tzimmermann@suse.de

drm/bochs: Remove sending of vblank event

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.

v4:
* separate commit from core vblank changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-5-tzimmermann@suse.de

drm/ast: Don't set struct drm_crtc_state.no_vblank explicitly

As ast does not initialize vblanking, atomic helpers initialize the
value of struct drm_crtc_state.no_vblank to be true. No need to set
it from within the driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-4-tzimmermann@suse.de

drm/arc: Remove sending of vblank event

The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. Remove the sending code from the
driver.

v4:
* separate commit from core vblank changes

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-3-tzimmermann@suse.de

drm: Initialize struct drm_crtc_state.no_vblank from device settings

At the end of a commit, atomic helpers can generate a fake VBLANK event
automatically. Originally implemented for writeback connectors, the
functionality can be used by any driver and/or hardware without proper
VBLANK interrupt.

The patch updates the documentation to make this behaviour official:
settings struct drm_crtc_state.no_vblank to true enables automatic
generation of fake VBLANK events.

The new interface drm_dev_has_vblank() returns true if vblanking has
been initialized for a device, or false otherwise. Atomic helpers use
this function when initializing no_vblank in the CRTC state in
drm_atomic_helper_check_modeset(). If vblanking has been initialized
for a device, no_blank is disabled. Otherwise it's enabled. Hence,
atomic helpers will automatically send out fake VBLANK events with any
driver that did not initialize vblanking.

v5:
* more precise documentation and commit message
v4:
* replace drm_crtc_has_vblank() with drm_dev_has_vblank()
* add drm_dev_has_vblank() in this patch
* move driver changes into separate patches
v3:
* squash all related changes patches into this patch

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200129120531.6891-2-tzimmermann@suse.de

drm/auth: Drop master_create/destroy hooks

vmwgfx stopped using them.

With the drm device model that we've slowly evolved over the past few
years master status essentially controls access to display resources,
and nothing else. Since that's a pure access permission check drivers
should have no need at all to track additional state on a per file
basis.

Aside: For cleanup and restoring kernel-internal clients the grand
plan is to move everyone over to drm_client and
drm_master_internal_acquire/release, like the generic fbdev code
already does. That should get rid of most ->lastclose implementations,
and I think also subsumes any processing vmwgfx does in
master_set/drop.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: "Thomas Hellström (VMware)" <thomas_os@shipmail.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200127100203.1299322-1-daniel.vetter@ffwll.ch

drm/crc: Actually allow to change the crc source

Oops.

Fixes: 9edbf1fa600a ("drm: Add API for capturing frame CRCs")
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821203835.18314-1-daniel.vetter@ffwll.ch

drm/zte: plane_state->fb iff plane_state->crtc

Checking both is one too much, so wrap a WARN_ON around it to stope
the copypasta.

Reviewed-by: Rodrigo Siqueira <rodrigosiqueira@gmail.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueira@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-10-daniel.vetter@ffwll.ch

drm/vkms: plane_state->fb iff plane_state->crtc

Checking both is one too much, so wrap a WARN_ON around it to stope
the copypasta.

Reviewed-by: Rodrigo Siqueira <rodrigosiqueira@gmail.com>
Tested-by: Rodrigo Siqueira <rodrigosiqueira@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-9-daniel.vetter@ffwll.ch

drm/vc4: plane_state->fb iff plane_state->crtc

Checking both is one too much, so wrap a WARN_ON around it to stope
the copypasta.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-7-daniel.vetter@ffwll.ch

drm/rockchip: plane_state->fb iff plane_state->crtc

Checking both is one too much, so wrap a WARN_ON around it to stope
the copypasta.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-6-daniel.vetter@ffwll.ch

drm/imx: plane_state->fb iff plane_state->crtc

Checking both is one too much, so wrap a WARN_ON around it to stope
the copypasta.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-4-daniel.vetter@ffwll.ch

drm/todo: Add item for the plane->atomic_check confusion

It's frankly a mess, and the confusion around plane_state->crtc/fb
that I fixed up in this series is the least of the problems. Add a
todo as a future note of how this could be done a lot better, and with
a lot less driver confusion.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-1-daniel.vetter@ffwll.ch

MAINTAINERS: add entry for tidss

Add entry for tidss DRM driver.

Version history:

v2: no change

v3: - Move tidss entry after omapdrm
    - Add "T:     git git://anongit.freedesktop.org/drm/drm-misc"

v4: no change

v5: no change

v6: no change

v7: no change

v8: - Add Reviewed-by: Benoit Parrot <bparrot@ti.com>

v9: - Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c22f7aa31af09cd4adcca6b1a6b0721d9429f055.1580129724.git.jsarha@ti.com

drm/tidss: New driver for TI Keystone platform Display SubSystem

This patch adds a new DRM driver for Texas Instruments DSS IPs used on
Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is
a major change to the older DSS IP versions, which are supported by
the omapdrm driver. While on higher level the Keystone DSS resembles
the older DSS versions, the registers are completely different and the
internal pipelines differ a lot.

DSS IP found on K2G is an "ultra-light" version, and has only a single
plane and a single output. The K3 DSS IPs are found on AM65x and J721E
SoCs. AM65x DSS has two video ports, one full video plane, and another
"lite" plane without scaling support. J721E has 4 video ports, 2 video
planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS)
output.

Version history:

v2: - rebased on top of drm-next-2019-11-27
    - sort all include lines in all files
    - remove all include <drm/drmP.h>
    - remove select "select VIDEOMODE_HELPERS"
    - call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no
      to call it in new modeset case as it is also called in vp_enable())
    - change probe sequence and drm_device allocation (follow example in
      drm_drv.c)
    - use __maybe_unused instead of #ifdef for pm functions
    - remove "struct drm_fbdev_cma *fbdev;" from driver data
    - check panel connector type before connecting it

v3: no change

v4: no change

v5: - remove fifo underflow irq handling, it is not an error and
      it should be used for debug purposes only
    - memory tuning, prefetch plane fifo up to high-threshold value to
      minimize possibility of underflows.

v6: - Check CTM and gamma support from dispc_features when creating crtc
    - Implement CTM support for k2g and fix k3 CTM implementation
    - Remove gamma property persistence and always write color properties
      in a new modeset

v7: - Fix checkpatch.pl --strict issues
    - Rebase on top of drm-misc-next-2020-01-10

v8: - Remove idle debug prints from dispc_init()
    - Add Reviewed-by: Benoit Parrot <bparrot@ti.com>

v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid
      conflict exported omapfb function with same name
    - Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/925fbfad58ff828e8e07fdff7073a0ee65750c3d.1580129724.git.jsarha@ti.com

dt-bindings: display: ti,j721e-dss: Add dt-schema yaml binding

Add dt-schema yaml bindig for J721E DSS, J721E version TI Keystone
Display SubSystem.

Version history:

v2: no change

v3: - reg-names: "wp" -> "wb"
    - Add ports node
    - Add includes to dts example
    - reindent dts example

v4: - Add descriptions to reg, clocks, and interrupts properties
    - Remove minItems when its value is the same as maxItems value

v5: - itemize reg, clocks and interrupts properties' descriptions
    - there is no "vp" reg-name, only "wb" for write back

v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and
      Benoit Parrot <bparrot@ti.com>

v7: no change

v8: no change

v9: no change

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fcba52837808853a4b2bf729bd33bd986cbdadf4.1580129724.git.jsarha@ti.com

dt-bindings: display: ti,am65x-dss: Add dt-schema yaml binding

Add dt-schema yaml bindig for AM65x DSS, AM65x version TI Keystone
Display SubSystem.

Version history:

v2: no change

v3: - Add ports node
    - use allOf in ti,am65x-oldi-io-ctrl to add both $ref and maxItems
    - Add includes to dts example
    - reindent dts example

v4: - Add descriptions to reg and clocks properties
    - Remove minItems when its value is the same as maxItems value

v5: - itemize reg and clocks properties' descriptions

v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and
      Benoit Parrot <bparrot@ti.com>

v7: no change

v8: no change

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1799656fb8cc42ca698fc29bbc80c1bae442d6d3.1580129724.git.jsarha@ti.com

dt-bindings: display: ti,k2g-dss: Add dt-schema yaml binding

Add dt-schema yaml bindig for K2G DSS, an ultra-light version of TI
Keystone Display SubSystem.

Version history:

v2: no change

v3: - Add ports node
    - Add includes to dts example
    - reindent dts example

v4: - Add descriptions to reg and clocks properties
    - Remove minItems when its value is the same as maxItems value
    - Remove ports node

v5: - itemize reg and clocks properties' descriptions

v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and
      Benoit Parrot <bparrot@ti.com>

v7: no change

v8: no change

v9: - Remove ports-node from the dts example

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/270297321f0768c10e241d289e3ac10e39cf12a9.1580129724.git.jsarha@ti.com

drm/lima: increase driver version to 1.1

Increase driver version for mesa driver to identify
the support of new heap buffer interface.

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116131157.13346-6-yuq825@gmail.com

drm/lima: recover task by enlarging heap buffer

Increase heap buffer backup memory when GP receive PLBU
out of memory interrupt, then resume the task.

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116131157.13346-5-yuq825@gmail.com

drm/lima: support heap buffer creation

heap buffer is used as output of GP and input of PP for
Mali Utgard GPU. Size of heap buffer depends on the task
so is a runtime variable.

Previously we just create a large enough buffer as heap
buffer. Now we add a heap buffer type to be able to
increase the backup memory dynamically when GP fail due
to lack of heap memory.

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116131157.13346-4-yuq825@gmail.com