Felix Fietkau [Mon, 5 Aug 2013 10:07:33 +0000 (10:07 +0000)]
ubus: change section/category to base, libs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37700
Gabor Juhos [Mon, 5 Aug 2013 09:24:19 +0000 (09:24 +0000)]
mac80211: fix rt2x00 dependency
The current dependency prevents building of the
rt2800{pci,usb} drivers for RT3883. Change the
dependency to fix this.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37699
Gabor Juhos [Mon, 5 Aug 2013 09:09:41 +0000 (09:09 +0000)]
mac80211: rt2x00: fix LED polarity patch
The patch causes compiler warning ...
<...>/drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_init_eeprom':
<...>/drivers/net/wireless/rt2x00/rt2800lib.c:5971:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
... and runtime errors on PCI/USB devices:
[ 11.810000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 021c detected
[ 11.830000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0001 detected
[ 11.880000] rt2x00mmio_regbusy_read() Indirect register access failed: offset=0x00007010, value=0x01ff0001
[ 12.080000] usb 1-1: reset high-speed USB device number 2 using ehci-platform
[ 12.250000] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 5592, rev 0222 detecte
[ 12.300000] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 000f detected
[ 12.350000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x1a93b47
[ 12.430000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
[ 12.480000] ieee80211 phy1: rt2x00usb_regbusy_read: Error - Indirect register access failed: offset=0x00007010, value=0x11a93b47
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37698
Gabor Juhos [Mon, 5 Aug 2013 09:09:40 +0000 (09:09 +0000)]
mac80211: enable RT{33,35,53,55}XX chip support in rt2800usb
Closes #13951.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37697
Gabor Juhos [Mon, 5 Aug 2013 09:09:39 +0000 (09:09 +0000)]
ar71xx: fix tl-wa901nd buttons code
This patch fixes the code of the buttons for TP-Link WA901ND.
Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37696
Gabor Juhos [Mon, 5 Aug 2013 09:09:37 +0000 (09:09 +0000)]
ar71xx: ubnt unifi outdoor register gpio button
This patch register the gpio buttons for the Ubiquiti UniFi Outdoor.
Signed-off-by: Rocco Folino <lordzen@autistici.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37695
John Crispin [Sun, 4 Aug 2013 17:05:33 +0000 (17:05 +0000)]
x86: change /dev/console to tty to fix job control
Job control is turned off because it cannot obtain controlling terminal on
/dev/console, so it is impossible to do any job control operation behind
real x86 device (keyboard+monitor or virtualized).
This patch switches /dev/console to tty devices for ash on x86 generic target.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
SVN-Revision: 37693
Jonas Gorski [Sun, 4 Aug 2013 15:32:36 +0000 (15:32 +0000)]
mac80211: add rtlwifi drivers
Signed-off-by: Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
[jogo@openwrt.org: add missing DRIVER_11N_SUPPORT select, add missing
usb dependencies, backport upstream fixes for Kconfig
issues]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37687
Luka Perkov [Sun, 4 Aug 2013 14:20:15 +0000 (14:20 +0000)]
imx6: sync usb chipidea with upstream
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37686
John Crispin [Sun, 4 Aug 2013 13:54:42 +0000 (13:54 +0000)]
generic: make the module reloc pacth work on mips64
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37685
John Crispin [Sun, 4 Aug 2013 13:54:32 +0000 (13:54 +0000)]
octeon: add support for the octeon mips64 SoC
This is the SoC used be the ESR Lite made by ubnt.com
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37684
Luka Perkov [Sun, 4 Aug 2013 13:28:26 +0000 (13:28 +0000)]
imx6: remove sdma binary
SVN-Revision: 37682
Jo-Philipp Wich [Sun, 4 Aug 2013 12:40:24 +0000 (12:40 +0000)]
busybox: rename ntp init script back to sysntpd (#13920)
Renaming the init script to ntp broke LuCI time sync functionality and collides with other ntp packages
SVN-Revision: 37681
Hauke Mehrtens [Sun, 4 Aug 2013 12:36:13 +0000 (12:36 +0000)]
brcm47xx: change board detection for some Asus devices
This closes #13316
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37680
Felix Fietkau [Sun, 4 Aug 2013 12:17:26 +0000 (12:17 +0000)]
build: process transitive dependencies after local dependencies
This improves duplicate dependency detection
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37679
Felix Fietkau [Sun, 4 Aug 2013 12:17:22 +0000 (12:17 +0000)]
build: suppress conditional dependencies if there are unconditional dependencies on the same symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37678
Hauke Mehrtens [Sun, 4 Aug 2013 09:51:07 +0000 (09:51 +0000)]
kernel: kmod-appletalk: fix dependencies
When CONFIG_LLC gets build as a module, also p8022.ko and psnap.ko are
getting build as a module. kmod-appletalk depends on llc.ko and
psnap.ko, but at least psnap.ko,was not packed. On most systems
CONFIG_LLC will be build into the kernel so this problem does not show
up.
This fixes the missing dependency of kmod-appletalk on psnap.ko
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37673
Hauke Mehrtens [Sun, 4 Aug 2013 09:41:10 +0000 (09:41 +0000)]
kernel: do not build FW_LOADER as a module.
CONFIG_FW_LOADER=y is set in the generic config and our packages in
packages/kernel/linux are depending on it to be compiled into the
kernel.
This fixes some dependency problem where kmod-r8169 misses
firmware_class.ko.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37672
Felix Fietkau [Sun, 4 Aug 2013 08:55:28 +0000 (08:55 +0000)]
ubus: update to latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37671
Hauke Mehrtens [Sat, 3 Aug 2013 17:12:07 +0000 (17:12 +0000)]
broadcom-diag: show error message in case something goes wrong with gpio irq
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37668
Hauke Mehrtens [Sat, 3 Aug 2013 17:10:37 +0000 (17:10 +0000)]
broadcom-diag: add gpio config for Asus RT-N66U
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37667
Hauke Mehrtens [Sat, 3 Aug 2013 17:09:39 +0000 (17:09 +0000)]
broadcom-diag: add gpio config for Linksys E4200v1
GPIO for Linksys E4200v1, tested and works. This closes #13454 and #13894
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37666
Felix Fietkau [Sat, 3 Aug 2013 11:56:27 +0000 (11:56 +0000)]
gpio-button-hotplug: cleanup, fix compiler warning
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37665
Felix Fietkau [Sat, 3 Aug 2013 11:49:50 +0000 (11:49 +0000)]
gpio-button-hotplug: fix active_low handling, possibly broken in r37643
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37664
Zoltan Herpai [Sat, 3 Aug 2013 10:37:25 +0000 (10:37 +0000)]
imx23: add missing DTS config for lradc
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37663
Zoltan Herpai [Sat, 3 Aug 2013 10:35:18 +0000 (10:35 +0000)]
imx23: add hw crypto (dcp) support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37662
Hauke Mehrtens [Sat, 3 Aug 2013 10:10:16 +0000 (10:10 +0000)]
kernel: only add v4l2-compat-ioctl32 when CONFIG_COMPAT is set
SVN-Revision: 37661
Hauke Mehrtens [Fri, 2 Aug 2013 20:13:54 +0000 (20:13 +0000)]
kernel: add missing config options
SVN-Revision: 37660
Hauke Mehrtens [Fri, 2 Aug 2013 20:08:20 +0000 (20:08 +0000)]
kernel: add missing module to video-core for kernel < 3.6
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37659
Hauke Mehrtens [Fri, 2 Aug 2013 20:07:11 +0000 (20:07 +0000)]
kernel: fix usb-chipidea compilation with kernel <= 3.9
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37658
Hauke Mehrtens [Fri, 2 Aug 2013 16:51:47 +0000 (16:51 +0000)]
kernel: add missing config option
SVN-Revision: 37657
Hauke Mehrtens [Fri, 2 Aug 2013 16:16:23 +0000 (16:16 +0000)]
kernel: add missing config option
brcm47xx does not use CONFIG_B53_SPI_DRIVER, but it could be selected if spi is build as a module
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37656
Hauke Mehrtens [Fri, 2 Aug 2013 15:44:04 +0000 (15:44 +0000)]
broadcom-diag: add support for the ASUS RT-N12
This adds button and led info, which I determined
by manually poking the gpio values.
Signed-off-by: Josh Stone <cuviper@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37655
Hauke Mehrtens [Fri, 2 Aug 2013 15:06:14 +0000 (15:06 +0000)]
broadcom-diag: increase version number
There are some changes in there and this should be rebuild.
SVN-Revision: 37654
Felix Fietkau [Fri, 2 Aug 2013 10:02:35 +0000 (10:02 +0000)]
mac80211: backport a few upstream fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37653
Jonas Gorski [Thu, 1 Aug 2013 23:04:42 +0000 (23:04 +0000)]
kernel: ocf: add missing kernel dependencies
OCF_CRYPTOSOFT uses both symbols form crypto_hash and crypto_blkcipher,
so let it select these through kernel config.
Fixes the following build error:
ERROR: "crypto_alloc_ahash" [crypto/ocf/cryptosoft.ko] undefined!
ERROR: "crypto_ahash_digest" [crypto/ocf/cryptosoft.ko] undefined!
ERROR: "crypto_ahash_setkey" [crypto/ocf/cryptosoft.ko] undefined!
make[6]: *** [__modpost] Error 1
make[5]: *** [modules] Error 2
Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37652
Hauke Mehrtens [Thu, 1 Aug 2013 22:19:19 +0000 (22:19 +0000)]
kernel: load libphy before tg3
SVN-Revision: 37651
Hauke Mehrtens [Thu, 1 Aug 2013 21:01:59 +0000 (21:01 +0000)]
brcm47xx: switch to kernel 3.10.4
This uses a new switch driver.
The old ADMTEK Adm6996 switch is not supported any more.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37650
Hauke Mehrtens [Thu, 1 Aug 2013 20:47:55 +0000 (20:47 +0000)]
brcm47xx: use lib phy when tg3 is in use
This is untested, but probably needed to make it work with the phy lib switch driver.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37649
Hauke Mehrtens [Thu, 1 Aug 2013 20:46:56 +0000 (20:46 +0000)]
kernel: b53: use devm_gpio_request_one() to request gpio
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37648
Hauke Mehrtens [Thu, 1 Aug 2013 19:33:59 +0000 (19:33 +0000)]
brcm47xx: improve detection of Linksys WRTSL54GS
This closes #13319
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37647
Hauke Mehrtens [Thu, 1 Aug 2013 19:17:51 +0000 (19:17 +0000)]
brcm47xx: remove support for kernel 3.9
This is not needed any more.
SVN-Revision: 37646
Hauke Mehrtens [Thu, 1 Aug 2013 19:05:34 +0000 (19:05 +0000)]
kernel: b53: add support for GPIO reset
This is needed for some switches used on bcm47xx SoCs like the one on the Asus RT-N66U.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37645
Hauke Mehrtens [Thu, 1 Aug 2013 19:04:12 +0000 (19:04 +0000)]
brcm47xx: add function to get a gpio pin by name
bcm47xx_nvram_gpio_pin() returns a gpio pin number for a given name based
on configuration data in nvram.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37644
John Crispin [Thu, 1 Aug 2013 14:31:28 +0000 (14:31 +0000)]
gpio-button-hotplug: use gpio_button_get_value() to initialize last_state.
TL-WR720N-v3 has a slider switch composed of 2 GPIO buttons which can be
used to swtich between 3 positions. At leat 1 button is in pressed state
in any of those positions. Initialize 'last_state' as 0 (released) will
cause the device to automatically enter failsafe mode on every bootup.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37643
John Crispin [Thu, 1 Aug 2013 14:31:24 +0000 (14:31 +0000)]
gpio-button-hotplug: use gpio_button_get_value() to fetch state.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37642
John Crispin [Thu, 1 Aug 2013 14:31:20 +0000 (14:31 +0000)]
gpio-button-hotplug: add inline function gpio_button_get_value().
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 37641
John Crispin [Thu, 1 Aug 2013 14:31:15 +0000 (14:31 +0000)]
ramips: add Poray IP2202 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37640
John Crispin [Thu, 1 Aug 2013 14:31:09 +0000 (14:31 +0000)]
ramips: add Poray X8 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37639
John Crispin [Thu, 1 Aug 2013 14:31:04 +0000 (14:31 +0000)]
ramips: add Poray X5/X6 Support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37638
John Crispin [Thu, 1 Aug 2013 14:30:58 +0000 (14:30 +0000)]
ramips: add Poray M4 4M/8M support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37637
John Crispin [Thu, 1 Aug 2013 14:30:53 +0000 (14:30 +0000)]
ramips: add Poray M3 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37636
John Crispin [Thu, 1 Aug 2013 14:30:46 +0000 (14:30 +0000)]
ramips: add basics for Poray devices
This commit adds the basic elements to support Poray brand routers.
It contains a tool to do the encryption/obfuscation that is used in
Poray routers.
Support for Poray devices was worked on by:
Felix Kaechele <heffer@fedoraproject.org>
Luis Soltero <lsoltero@globalmarinenet.com>
Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37635
John Crispin [Thu, 1 Aug 2013 14:30:40 +0000 (14:30 +0000)]
lantiq: fix VG3503J ethernet/gphy led support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37634
John Crispin [Thu, 1 Aug 2013 14:30:33 +0000 (14:30 +0000)]
ralink: add mt7620a_mt7610e profile
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37633
Zoltan Herpai [Thu, 1 Aug 2013 09:36:37 +0000 (09:36 +0000)]
imx23: add lradc support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37632
Zoltan Herpai [Thu, 1 Aug 2013 06:58:08 +0000 (06:58 +0000)]
kernel: add missing iio config symbols for 3.10
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37631
Felix Fietkau [Wed, 31 Jul 2013 22:07:13 +0000 (22:07 +0000)]
libubox: update to the latest version, fixes a fd deletion race condition in uloop
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37629
Felix Fietkau [Wed, 31 Jul 2013 22:07:09 +0000 (22:07 +0000)]
uhttpd: update to the latest version, fixes a crash on early cgi/lua process termination
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37628
Jo-Philipp Wich [Wed, 31 Jul 2013 18:11:55 +0000 (18:11 +0000)]
base-files: implement -l (--list-backup) sysupgrade parameter to list the files that would be backed up
SVN-Revision: 37627
Hauke Mehrtens [Wed, 31 Jul 2013 17:42:55 +0000 (17:42 +0000)]
broadcom-wl: fix compile error with kernel 3.10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37626
Hauke Mehrtens [Wed, 31 Jul 2013 17:41:52 +0000 (17:41 +0000)]
brcm47xx: run mtd fixtrx linux every time
With this patch it is possible to boot a device with kernel 3.10 a second time.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37625
Jo-Philipp Wich [Wed, 31 Jul 2013 14:10:34 +0000 (14:10 +0000)]
base-files: abort sysupgrade if file specified with --restore-config is not found
SVN-Revision: 37624
Jo-Philipp Wich [Wed, 31 Jul 2013 10:44:50 +0000 (10:44 +0000)]
ubox: update to git head
- fixes extroot tag file corruption with long uuids
SVN-Revision: 37623
Zoltan Herpai [Wed, 31 Jul 2013 09:52:46 +0000 (09:52 +0000)]
imx23: add SoC sound support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37622
Felix Fietkau [Wed, 31 Jul 2013 08:54:56 +0000 (08:54 +0000)]
gcc: merge a bugfix for a MIPS specific internal compiler error
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37621
Jo-Philipp Wich [Tue, 30 Jul 2013 16:42:05 +0000 (16:42 +0000)]
base-files: implement -T (--test) sysupgrade parameter to verify image without actually flashing it
SVN-Revision: 37620
Felix Fietkau [Tue, 30 Jul 2013 08:00:25 +0000 (08:00 +0000)]
kernel: update remaning platforms accidentally left out of r37617
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37619
Felix Fietkau [Mon, 29 Jul 2013 22:45:57 +0000 (22:45 +0000)]
mac80211: rt2x00: add missing of.h header
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37618
Felix Fietkau [Mon, 29 Jul 2013 22:42:22 +0000 (22:42 +0000)]
kernel: update to linux 3.10.4, refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37617
Felix Fietkau [Mon, 29 Jul 2013 19:44:05 +0000 (19:44 +0000)]
ath9k: fix several issues in the tx queueing rework
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37616
John Crispin [Mon, 29 Jul 2013 13:10:42 +0000 (13:10 +0000)]
lantiq: setup gphy leds on TPlink TDW8970
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37612
John Crispin [Mon, 29 Jul 2013 13:10:37 +0000 (13:10 +0000)]
lantiq: add gphy pinmux definitions
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37611
John Crispin [Mon, 29 Jul 2013 13:10:32 +0000 (13:10 +0000)]
lantiq: set sane default for phy leds
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37610
John Crispin [Mon, 29 Jul 2013 13:10:26 +0000 (13:10 +0000)]
ramips: fix indenting of spi partitions inside dts files
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37609
John Crispin [Mon, 29 Jul 2013 13:10:12 +0000 (13:10 +0000)]
mac80211: rt2x00: fix default register settings for rt5350
Comparing the RTSDK driver and mac80211 revealed, that this register needs
to have a special setup on rt5350.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37608
John Crispin [Mon, 29 Jul 2013 13:09:16 +0000 (13:09 +0000)]
mac80211: rt2x00: enable setting wifi led polarity from OF
This patch enables setting the wifi led polarity from OF.
It can be used in a DTS' wmac section like this:
ralink,led-polarity = <1>;
Valid values are 0 or 1.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37607
Felix Fietkau [Mon, 29 Jul 2013 12:49:04 +0000 (12:49 +0000)]
libubox: update to latest version, adds extra sanity checks to blob/blobmsg iterator macros
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37604
Felix Fietkau [Mon, 29 Jul 2013 12:49:01 +0000 (12:49 +0000)]
rt2x00: merge fix for queue stopping
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37603
Felix Fietkau [Mon, 29 Jul 2013 12:48:57 +0000 (12:48 +0000)]
kernel: add missing config symbols for 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37602
Felix Fietkau [Mon, 29 Jul 2013 10:11:07 +0000 (10:11 +0000)]
gcc: add a bugfix for an internal compiler error on mips64
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37601
Felix Fietkau [Mon, 29 Jul 2013 09:38:29 +0000 (09:38 +0000)]
build: unify target independent optimization options
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37600
Felix Fietkau [Mon, 29 Jul 2013 09:38:24 +0000 (09:38 +0000)]
tools: make padjffs2 depend on findutils
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37599
Felix Fietkau [Mon, 29 Jul 2013 09:38:21 +0000 (09:38 +0000)]
kernel: stop patching -funit-at-a-time into CFLAGS, it has no effect on recent compilers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37598
Felix Fietkau [Mon, 29 Jul 2013 09:38:08 +0000 (09:38 +0000)]
mac80211: add support for verbose builds using V=sc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37597
Luka Perkov [Sun, 28 Jul 2013 23:27:35 +0000 (23:27 +0000)]
iproute2: update to 3.10.0
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37590
Luka Perkov [Sun, 28 Jul 2013 23:27:34 +0000 (23:27 +0000)]
zlib: update to 1.2.8
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37589
Luka Perkov [Sun, 28 Jul 2013 23:27:29 +0000 (23:27 +0000)]
e2fsprogs: update to 1.42.8 and add e4defrag
Signed-off-by: Peter Wagner <tripolar@gmx.at>
SVN-Revision: 37588
Hauke Mehrtens [Sun, 28 Jul 2013 22:14:55 +0000 (22:14 +0000)]
bcm53xx: compile b53 switch driver
SVN-Revision: 37587
Hauke Mehrtens [Sun, 28 Jul 2013 22:13:52 +0000 (22:13 +0000)]
bcm53xx: update patches
This reorders the patchs and adds some new ones.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37586
Hauke Mehrtens [Sun, 28 Jul 2013 21:22:50 +0000 (21:22 +0000)]
bcm53xx: use clocksource patch as it was committed upstream
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37585
Hauke Mehrtens [Sun, 28 Jul 2013 21:20:15 +0000 (21:20 +0000)]
bcm53xx: add initial bgmac patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37584
Hauke Mehrtens [Sun, 28 Jul 2013 21:10:42 +0000 (21:10 +0000)]
bcm53xx: activate pci and usb in kernel config
This is not working, just compiling
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37583
Luka Perkov [Sun, 28 Jul 2013 20:34:21 +0000 (20:34 +0000)]
imx6: update default packages
SVN-Revision: 37582
Luka Perkov [Sun, 28 Jul 2013 20:34:19 +0000 (20:34 +0000)]
imx6: add support for EHCI USB
SVN-Revision: 37581
Luka Perkov [Sun, 28 Jul 2013 20:34:18 +0000 (20:34 +0000)]
kernel: add usb-mxs-phy package
SVN-Revision: 37580
Luka Perkov [Sun, 28 Jul 2013 20:34:17 +0000 (20:34 +0000)]
kernel: update usb-chipidea package
SVN-Revision: 37579
Luka Perkov [Sun, 28 Jul 2013 20:34:09 +0000 (20:34 +0000)]
kernel: update usb2 package
SVN-Revision: 37578
Gabor Juhos [Sun, 28 Jul 2013 10:23:38 +0000 (10:23 +0000)]
ar71xx: add profile and build image for the WNR612 v2 board
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37577
Gabor Juhos [Sun, 28 Jul 2013 10:23:37 +0000 (10:23 +0000)]
ar71xx: add user-space support for the WNR612 v2 board
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3876/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37576
projects / openwrt / staging / robimarko.git / log