openwrt/staging/blogic.git
7 years agoInput: cros_ec_keyb - add an EC event for sysrq
Rajat Jain [Mon, 3 Apr 2017 18:53:41 +0000 (11:53 -0700)]
Input: cros_ec_keyb - add an EC event for sysrq

Some form factors (detachables/tablets) may not have a keyboard and
thus user may have to resort to using a defined EC UI to send sysrq(s)
to the kernel in order to collect crash info etc. This UI typically
is in the form of user pressing volume / power buttons in some specific
sequence and for some specific time. Add a new EC event that allows EC
to communicate the sysrq to the AP.

(We're skipping event number 5 because it has been reserved for
something else)

Signed-off-by: Rajat Jain <rajatja@google.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: psmouse - fix cleaning up SMBus companions
Dmitry Torokhov [Sat, 1 Apr 2017 18:33:11 +0000 (11:33 -0700)]
Input: psmouse - fix cleaning up SMBus companions

When trying to destroy platform data after destruction of SMbus companion,
we need to make sure that we are actually dealing with an SMB companion
device, and not some random I2C client device.

Fixes: 8eb92e5c9133 ("Input: psmouse - add support for SMBus companions")
Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: bma150 - remove support for bma150
H. Nikolaus Schaller [Sat, 1 Apr 2017 16:43:47 +0000 (09:43 -0700)]
Input: bma150 - remove support for bma150

This essentially reverts commit baf28d91e7b1 ("Input: bma150 - avoid
binding to bma180 if IIO bma180 driver present") and commit ef3714fdbc8d
("Input: bma150 - extend chip detection for bma180")

Rationale: initially (2012) the GTA04 device using a bma180 chip simply
referenced the bma150 platform driver in its board file [1] which happened
to work in all scenarios that were tested.

When conversion to DT started (2014), we needed to make the driver be still
recognised. Hence we introduced the compatibility to the bma180 chip in
Linux 3.15-rc5 [2] without further checks if it is really 100% compatible.
This worked flawlessly for years with the GTA04 device.

Recently (2016), Hans de Goede pointed out that the chips are not as
similar as they appeared and the driver works with the bma180 for the GTA04
only by good luck. He proposed to remove the bma180 support completely [3],
but we still did need it until we have a replacement. Thus, a conditional
compile was added.

We have now developed a generic iio-input-bridge which works with any 2 or
3 axis iio based accelerometer. It has been tested on GTA04 and Pyra and
works as expected. Therefore we can remove the bma180 support from this
driver completely. User-space API compatibility can be restored by using
the iio-input-bridge.

Maybe it is time to convert the bma150 driver to iio as well and retire the
accelerometer input drivers completely but this is a different story and
task.

[1]: https://github.com/neilbrown/linux/blob/gta04/3.2.y/arch/arm/mach-omap2/board-omap3gta04.c#L976
[2]: https://patchwork.kernel.org/patch/3961171/
[3]: https://patchwork.kernel.org/patch/9325481/

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agodt-bindings: input: touchscreen: add max11801-ts binding
Jagan Teki [Wed, 29 Mar 2017 07:20:50 +0000 (00:20 -0700)]
dt-bindings: input: touchscreen: add max11801-ts binding

Add missing documentation of max11801-ts dt-binding details.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: max11801_ts - add missing of_match_table
Jagan Teki [Wed, 29 Mar 2017 07:16:35 +0000 (00:16 -0700)]
Input: max11801_ts - add missing of_match_table

Added missing of_match_table for max11801_ts driver with compatible as
"maxim,max11801_ts"

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: matrix_keypad - add option to drive inactive columns
David Rivshin [Wed, 29 Mar 2017 07:14:16 +0000 (00:14 -0700)]
Input: matrix_keypad - add option to drive inactive columns

The gpio-matrix-keypad driver normally sets inactive columns as inputs
while scanning. This does not work for all hardware, which may require
the inactive columns to be actively driven in order to overcome any
pull-ups/downs on the columns.

Signed-off-by: David Rivshin <drivshin@allworx.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: melfas_mip4 - ensure that device is present
Dmitry Torokhov [Fri, 24 Mar 2017 23:50:28 +0000 (16:50 -0700)]
Input: melfas_mip4 - ensure that device is present

Try a quick read from the device in mip4_query_device() to make sure
that the device is there, as we do not consider failures to retrieve
product name or resolution fatal.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: ads7846 - avoid pen up/down when reading hwmon
David Jander [Mon, 20 Mar 2017 18:05:29 +0000 (11:05 -0700)]
Input: ads7846 - avoid pen up/down when reading hwmon

Each time the HWMON devices are read (e.g. battery voltage) while the
touchscreen is held pressed, extra pen-up and pen-down events are
generated. This is fixed by avoiding the UP event when the touchscreen is
stopped.

Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: synaptics - add support for Intertouch devices
Benjamin Tissoires [Thu, 2 Mar 2017 22:13:53 +0000 (14:13 -0800)]
Input: synaptics - add support for Intertouch devices

Most of the Synaptics devices are connected through PS/2 and a different
bus (SMBus or HID over I2C). The secondary bus capability is indicated by
the InterTouch bit in extended capability 0x0C.

We only enable the InterTouch device to be created for the laptops
registered with the top software button property or those we know that are
functional. In the future, we might change the default to always rely on
the InterTouch bus. Currently, users can enable/disable the feature with
the psmouse parameter synaptics_intertouch.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: synaptics - split device info into a separate structure
Dmitry Torokhov [Sun, 5 Mar 2017 23:51:33 +0000 (15:51 -0800)]
Input: synaptics - split device info into a separate structure

In preparation for SMBus/Intertouch device support, move static device
information that we query form the touchpad upon initialization into
separate structure. This will allow us to query the device without
allocating memory first.

Also stop using "unsigned long", everything fits into 32 bit chunks.

Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: psmouse - add support for SMBus companions
Benjamin Tissoires [Thu, 2 Mar 2017 18:48:23 +0000 (10:48 -0800)]
Input: psmouse - add support for SMBus companions

This provides glue between PS/2 devices that enumerate the RMI4 devices
and Elan touchpads to the RMI4 (or Elan) SMBus driver.

The SMBus devices keep their PS/2 connection alive. If the initialization
process goes too far (psmouse_activate called), the device disconnects
from the I2C bus and stays on the PS/2 bus, that is why we explicitly
disable PS/2 device reporting (by calling psmouse_deactivate) before
trying to register SMBus companion device.

The HID over I2C devices are enumerated through the ACPI DSDT, and
their PS/2 device also exports the InterTouch bit in the extended
capability 0x0C. However, the firmware keeps its I2C connection open
even after going further in the PS/2 initialization. We don't need
to take extra precautions with those device, especially because they
block their PS/2 communication when HID over I2C is used.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: psmouse - introduce notion of SMBus companions
Dmitry Torokhov [Thu, 2 Mar 2017 23:50:56 +0000 (15:50 -0800)]
Input: psmouse - introduce notion of SMBus companions

Prepare PS/2 mouse drivers to work with devices that are accessible both
via PS/2 and SMBus, which provides higher bandwidth, and thus suits better
for modern multi-touch devices.

We expect that SMBus drivers will take control over the device, so when
we detect SMBus "protocol" we forego registering input device, or enabling
PS/2 device reports (as it usually makes device unresponsive to access over
SMBus).

Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: psmouse - store pointer to current protocol
Dmitry Torokhov [Fri, 3 Mar 2017 23:29:00 +0000 (15:29 -0800)]
Input: psmouse - store pointer to current protocol

Instead of storing only protocol "type" in pmsouse structure, store pointer
to the protocol structure, so that we have access to more data without
having to copy it over to psmouse structure.

Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: psmouse - implement fast reconnect option
Dmitry Torokhov [Mon, 6 Mar 2017 07:19:22 +0000 (23:19 -0800)]
Input: psmouse - implement fast reconnect option

Make use of serio's fast reconnect option and allow psmouse protocol
handler's to implement fast reconnect handlers that will be called during
system resume.

Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: serio - add fast reconnect option
Dmitry Torokhov [Fri, 3 Mar 2017 19:47:40 +0000 (11:47 -0800)]
Input: serio - add fast reconnect option

Devices connected to serio bus are quite slow, and to improve apparent
speed of resume process, serio core resumes (reconnects) its devices
asynchronously, by posting port reconnect requests to a workqueue.
Unfortunately this means that if there is a dependent device of a given
serio port (for example SMBus part of touchpad connected via both PS/2 and
SMBus), we do not have a good way of ensuring resume order.

This change allows drivers to define "fast reconnect" handlers that would
be called in-line during system resume. Drivers need to ensure that these
handlers are truly "fast".

Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: synaptics - do not mix logical and bitwise operations
Dmitry Torokhov [Thu, 23 Mar 2017 17:02:50 +0000 (10:02 -0700)]
Input: synaptics - do not mix logical and bitwise operations

Let's stop using !!x to reduce value of trackstick button expression to 0/1
and use shift instead. This removes the following sparse warning:

  CHECK   drivers/input/mouse/synaptics.c
drivers/input/mouse/synaptics.c:943:79: warning: dubious: !x | y

Also, the bits we are testing are not capabilities, so lets drop "_CAP"
suffix from macro names.

Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: qt1070 - add OF device ID table
Javier Martinez Canillas [Thu, 23 Mar 2017 20:33:12 +0000 (13:33 -0700)]
Input: qt1070 - add OF device ID table

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

The compatible strings don't have a vendor prefix because that's how it's
used currently, and changing this will be a Device Tree ABI break.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: synaptics_i2c - add OF device ID table
Javier Martinez Canillas [Thu, 23 Mar 2017 20:31:50 +0000 (13:31 -0700)]
Input: synaptics_i2c - add OF device ID table

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: silead - add OF device ID table
Javier Martinez Canillas [Thu, 23 Feb 2017 08:44:28 +0000 (00:44 -0800)]
Input: silead - add OF device ID table

The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

As pointed by Hans de Goede, there's no mssl1680 and this is just used in
some ACPI systems to identify the gsl1680 chip. So isn't included in the
OF device ID table since a DT should use the proper device name instead.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: convert remaining uses of pr_warning to pr_warn
Joe Perches [Sat, 18 Mar 2017 00:15:38 +0000 (17:15 -0700)]
Input: convert remaining uses of pr_warning to pr_warn

To enable eventual removal of pr_warning

This makes pr_warn use consistent for drivers/input

Prior to this patch, there were 8 uses of pr_warning and
17 uses of pr_warn in drivers/input

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: soc_button_array - add support for ACPI 6.0 Generic Button Device
Hans de Goede [Fri, 17 Mar 2017 21:03:54 +0000 (14:03 -0700)]
Input: soc_button_array - add support for ACPI 6.0 Generic Button Device

Windows 10 tablets with gpio buttons will typically use the ACPI 6.0
Generic Button Device with a HID of ACPI0011 for these buttons.

The ACPI description for these in the ACPI0011 devices _DSD object uses
something resembling HID descriptors, except that instead of indicating
a bit index into a HID input report, the index indicates the _CRS index
for the GPIO.

The use of 1 interrupt per button, some of which need to be wakeup
sources, instead of using input reports makes it impossible to use the
HID subsystem for this.

This really is just another gpio-keys input device with the platform
data described in ACPI, so this commit adds parsing for this new way
to describe gpio-keys to the soc_button_array driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: soc_button_array - get rid of MAX_NBUTTONS
Hans de Goede [Fri, 17 Mar 2017 21:03:28 +0000 (14:03 -0700)]
Input: soc_button_array - get rid of MAX_NBUTTONS

Count how much gpio_keys we actually need, this is a preparation patch
for adding support for the new Win10 / ACPI-6.0 "Generic Buttons Device"
support.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: tps6507x-ts - update to devm_* API
Yegor Yefremov [Sat, 11 Mar 2017 00:26:08 +0000 (16:26 -0800)]
Input: tps6507x-ts - update to devm_* API

Update the code to use devm_* API so that driver core will manage
resources.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: dm355evm_keys - switch to using managed resources
Dmitry Torokhov [Wed, 8 Mar 2017 17:36:23 +0000 (09:36 -0800)]
Input: dm355evm_keys - switch to using managed resources

Using devm_* APIs simpifies error handling and device teardown.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: wistron_btns - remove use of sparse_keymap_free
Dmitry Torokhov [Wed, 8 Mar 2017 17:27:27 +0000 (09:27 -0800)]
Input: wistron_btns - remove use of sparse_keymap_free

Now that sparse keymap uses managed memory, we no longer need to clean it
up manually.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: dm355evm_keys - remove use of sparse_keymap_free
Dmitry Torokhov [Wed, 8 Mar 2017 17:21:13 +0000 (09:21 -0800)]
Input: dm355evm_keys - remove use of sparse_keymap_free

Now that sparse keymap uses managed memory, we no longer need to clean it
up manually.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoMerge branch 'ib/4.10-sparse-keymap-managed' into next
Dmitry Torokhov [Thu, 9 Mar 2017 18:03:22 +0000 (10:03 -0800)]
Merge branch 'ib/4.10-sparse-keymap-managed' into next

This brings in version of sparse keymap code that uses managed memory.

7 years agoInput: soc_button_array - use NULL for GPIO connection ID
Hans de Goede [Thu, 9 Mar 2017 17:58:30 +0000 (09:58 -0800)]
Input: soc_button_array - use NULL for GPIO connection ID

The gpiolib-acpi code is becoming more strict and connection-IDs
may only be used with devices which have a _DSD with matching IDs
in there. Since the soc_button_array ACPI binding is pure index
based pass in NULL as connection-ID to avoid the more strict cheks
resulting in gpiod_count and gpiod_get_index not returning any gpios.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: axp20x-pek - do not register input device on some systems
Hans de Goede [Thu, 9 Mar 2017 17:55:49 +0000 (09:55 -0800)]
Input: axp20x-pek - do not register input device on some systems

On some systems (Intel tablets with axp288 pmic) the powerbutton is
also connected to a gpio pin of the SoC, advertised through the
"INTCFD9" / "PNP0C40" acpi device. This leads to double reporting
of powerbutton events, which is undesirable, so one driver needs
to not report input events in this case.

Since the soc_button_array driver for the "PNP0C40" acpi device
also handles wake from suspend on these tablets and since the
axp20x-pel driver requires relative expensive i2c accrsses,
it is best for the axp20x-pek driver to not register an input device
in this case.

Note that this commit leaves the axp20x-driver bound to the
device, rather then returning -ENODEV, this is done so that the
sysfs attributes it offers are kept around.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: axp20x_pek - add axp20x_pek_probe_input_device helper
Hans de Goede [Thu, 9 Mar 2017 17:47:24 +0000 (09:47 -0800)]
Input: axp20x_pek - add axp20x_pek_probe_input_device helper

Move all input device related initialization into a new
axp20x_pek_probe_input_device helper function.

This introduces one functional change, the input device is now
registered before the sysfs attr get registered. This is not a problem
as the sysfs attr are to configure some long press settings (forced
poweroff) in the hardware and do not interact with the input_device.

This is a preparation patch for not always registering the input dev.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: axp20x-pek - use our own device for errors
Hans de Goede [Thu, 9 Mar 2017 17:47:01 +0000 (09:47 -0800)]
Input: axp20x-pek - use our own device for errors

Before this commit axp20x-pek was mixing 2 style error reporting calls:
dev_err(&pdev->dev, ...);
dev_err(axp20x->dev, ...);

But the second is our parent device, not our own device, so switch to
using &pdev->dev everywhere.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: drv260x - remove OF dependency
Jingkui Wang [Thu, 9 Mar 2017 17:46:17 +0000 (09:46 -0800)]
Input: drv260x - remove OF dependency

As the driver is using generic device properties, it should work
properly when CONFIG_OF is turned off. This patch removes the
ifdef CONFIGOF and make sure the driver always have of_match_table.

Signed-off-by: Jingkui Wang <jkwang@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: sparse-keymap - use a managed allocation for keymap copy
Michał Kępień [Wed, 8 Mar 2017 17:20:10 +0000 (09:20 -0800)]
Input: sparse-keymap - use a managed allocation for keymap copy

Some platform drivers use devm_input_allocate_device() together with
sparse_keymap_setup() in their .probe callbacks.  While using the former
simplifies error handling, using the latter necessitates calling
sparse_keymap_free() in the error path and upon module unloading to
avoid leaking the copy of the keymap allocated by sparse_keymap_setup().

To help prevent such leaks and enable simpler error handling, make
sparse_keymap_setup() use devm_kmemdup() to create the keymap copy so
that it gets automatically freed.

This works for both managed and non-managed input devices as the keymap
is freed after the last reference to the input device is dropped.

Note that actions previously taken by sparse_keymap_free(), i.e. taking
the input device's mutex and zeroing its keycode and keycodemax fields,
are now redundant because the managed keymap will always be freed after
the input device is unregistered.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: pwm-beeper - support customized freq for SND_BELL
Guan Ben [Tue, 7 Mar 2017 18:25:27 +0000 (10:25 -0800)]
Input: pwm-beeper - support customized freq for SND_BELL

Extend the pwm-beeper driver to support customized frequency for SND_BELL
from device properties.

Signed-off-by: Guan Ben <ben.guan@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: alps - cleanup alps_model_data
Pali Rohár [Tue, 7 Mar 2017 17:43:35 +0000 (09:43 -0800)]
Input: alps - cleanup alps_model_data

Sort all devices in alps_model_data by signature and remove
command_mode_resp which is not used anymore.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: alps - warn about unsupported ALPS V9 touchpad
Pali Rohár [Tue, 7 Mar 2017 17:42:46 +0000 (09:42 -0800)]
Input: alps - warn about unsupported ALPS V9 touchpad

Support for devices with ALPS_PROTO_V9 is not implemented yet but we can
detect these alps touchpads and warn users about it.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: alps - move ALPS_PROTO_V4 out of alps_model_data table
Pali Rohár [Tue, 7 Mar 2017 17:41:34 +0000 (09:41 -0800)]
Input: alps - move ALPS_PROTO_V4 out of alps_model_data table

Like for other protocols create alps_v4_protocol_data and use it in
alps_identify() function.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: ad7879 - do not manipulate capability bits directly
Dmitry Torokhov [Tue, 28 Feb 2017 19:56:20 +0000 (11:56 -0800)]
Input: ad7879 - do not manipulate capability bits directly

Instead of manipulating capabilities bits of input device directly, let's
use input_set_capability() API.

Also, stop setting ABS_X/Y bits explicitly as input_set_abs_params() does
this for us.

Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: ad7879 - try parsing properties on non-DT systems
Dmitry Torokhov [Tue, 28 Feb 2017 19:50:56 +0000 (11:50 -0800)]
Input: ad7879 - try parsing properties on non-DT systems

We have switched the driver to use generic device properties API, so there
is no need to check for presence of DT node before trying parse properties.

Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: ad7879 - return plain error code from ad7879_probe()
Dmitry Torokhov [Tue, 28 Feb 2017 19:43:52 +0000 (11:43 -0800)]
Input: ad7879 - return plain error code from ad7879_probe()

With the switch to devm, there is no need for ad7879_probe() to return the
touchscreen structure, we can use plain error code. This also fixes issue
introduced with devm concersion, where we returned 0 on success (which
worked OK since IS_ERR(0) would not trigger, but was not correct
regardless).

Fixes: 381f688eee3d ("Input: ad7879 - use more devm interfaces")
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: ad7879 - make sure we set up drvdata
Dmitry Torokhov [Tue, 28 Feb 2017 21:57:21 +0000 (13:57 -0800)]
Input: ad7879 - make sure we set up drvdata

The conversion to devm accidentally removed setting up of I2C client data
upon successful probe of the touchscreen. Let's move this setting into the
core, so we do not forger about it again.

Fixes: 381f688eee3d ("Input: ad7879 - use more devm interfaces")
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: ad7846 - move bindings to touchscreen subdirectory
H. Nikolaus Schaller [Thu, 23 Feb 2017 17:32:36 +0000 (09:32 -0800)]
Input: ad7846 - move bindings to touchscreen subdirectory

This moves device tree bindings for ADS7846 together with the other
touchscreen bindings.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: ad7879 - add header file to fix ad7879.c build errors
Randy Dunlap [Sat, 25 Feb 2017 18:32:58 +0000 (10:32 -0800)]
Input: ad7879 - add header file to fix ad7879.c build errors

Add header file to fix these build errors:

../drivers/input/touchscreen/ad7879.c: In function 'ad7879_parse_dt':
../drivers/input/touchscreen/ad7879.c:505:2: error: implicit declaration of function 'device_property_read_u32' [-Werror=implicit-function-declaration]
  err = device_property_read_u32(dev, "adi,resistance-plate-x", &tmp);
  ^
../drivers/input/touchscreen/ad7879.c:512:2: error: implicit declaration of function 'device_property_read_u8' [-Werror=implicit-function-declaration]
  device_property_read_u8(dev, "adi,first-conversion-delay",
  ^
../drivers/input/touchscreen/ad7879.c:521:2: error: implicit declaration of function 'device_property_read_bool' [-Werror=implicit-function-declaration]
  ts->swap_xy = device_property_read_bool(dev, "touchscreen-swapped-x-y");
  ^

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoMerge branch 'tsc2007' into next
Dmitry Torokhov [Thu, 23 Feb 2017 17:22:10 +0000 (09:22 -0800)]
Merge branch 'tsc2007' into next

Bring in TSC2007 improvements.

7 years agoInput: tca8418_keypad - remove double read of key event register
Dmitry Torokhov [Mon, 13 Feb 2017 23:45:59 +0000 (15:45 -0800)]
Input: tca8418_keypad - remove double read of key event register

There is no need to tread the same register twice in a row.

Fixes: ea4348c8462a ("Input: tca8418_keypad - hide gcc-4.9 -Wmaybe-un ...")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: ad7879 - add SPI device tree binding example
Michael Hennerich [Wed, 22 Feb 2017 18:33:32 +0000 (10:33 -0800)]
Input: ad7879 - add SPI device tree binding example

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: ad7879 - update MODULE_AUTHOR email address
Michael Hennerich [Wed, 22 Feb 2017 18:34:20 +0000 (10:34 -0800)]
Input: ad7879 - update MODULE_AUTHOR email address

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: ad7879-spi - remove bits_per_word = 16 enforcement
Michael Hennerich [Wed, 22 Feb 2017 18:32:48 +0000 (10:32 -0800)]
Input: ad7879-spi - remove bits_per_word = 16 enforcement

Using regmap this is no longer required.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: ad7879 - allow exporting AUX/VBAT/GPIO pin via device property
Dmitry Torokhov [Fri, 17 Feb 2017 18:45:59 +0000 (10:45 -0800)]
Input: ad7879 - allow exporting AUX/VBAT/GPIO pin via device property

Up until now only platforms using legacy platform data were able to switch
AUX/VBAT/GPIO pin in GPIO mode and use it as regular GPIO line. Let's
allow platforms using generic device properties to do the same.

Reviewed-by: Michael Hennerich <michael.hennerich@analog.com>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: ad7879 - use more devm interfaces
Dmitry Torokhov [Fri, 17 Feb 2017 17:29:40 +0000 (09:29 -0800)]
Input: ad7879 - use more devm interfaces

gpiochip_add now has a managed version, and we can remove sysfs attribute
group via devm_add_action_or_reset (at least until we have devm version of
sysfs_create_group). This allows us to get rid of ad7879_remove().

Reviewed-by: Michael Hennerich <michael.hennerich@analog.com>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: ad7879 - convert to use regmap
Dmitry Torokhov [Fri, 17 Feb 2017 07:22:38 +0000 (23:22 -0800)]
Input: ad7879 - convert to use regmap

Instead of rolling our own infrastructure to provide uniform access to I2C
and SPI buses, let's switch to using regmap.

Reviewed-by: Michael Hennerich <michael.hennerich@analog.com>
Tested-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: tsc2007 - correctly report pressure and not resistance to user space
H. Nikolaus Schaller [Thu, 23 Feb 2017 07:53:02 +0000 (23:53 -0800)]
Input: tsc2007 - correctly report pressure and not resistance to user space

Previously, tsc2007 would report as ABS_PRESSURE:
0              for no pressure (resistance infinite)
high value     for soft pressure (high resistance)
low value      for firm pressure (lower resistance)

This does not matter for most applications (e.g. GUI, Menu, Scrolling etc.)
where the ABS_PRESSURE is ignored and only BTN_TOUCH is processed to detect
screen taps.

Only some special graphics applications read the pressure channel and they
will be mixed up by this non-monotonic relation.

So we fix it to become:
0              for no pressure (resistance infinite)
low value      for soft pressure (high resistance)
high value     for firm pressure (lower resistance)

While this patch changes the values reported to userspace, ABS_PRESSURE is
used rarely by userspace. Most software only relies on BTN_TOUCH (boolean),
which is not affected by this patch. Some graphics software makes use of
the interface and does not work correctly with the currently used inverted
behaviour.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: tsc2007 - rename function tsc2007_calculate_pressure
H. Nikolaus Schaller [Thu, 23 Feb 2017 07:49:02 +0000 (23:49 -0800)]
Input: tsc2007 - rename function tsc2007_calculate_pressure

Rename tsc2007_calculate_pressure to tsc2007_calculate_resistance because
that is what it does.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: tsc2007 - switch to using input_set_capability()
Dmitry Torokhov [Fri, 17 Feb 2017 22:51:13 +0000 (14:51 -0800)]
Input: tsc2007 - switch to using input_set_capability()

Do not manipulate evbits/keybits directly, use helper for that.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: zet6223 - export OF device ID as module aliases
Javier Martinez Canillas [Mon, 20 Feb 2017 23:06:39 +0000 (15:06 -0800)]
Input: zet6223 - export OF device ID as module aliases

The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.

Before this patch:

$ modinfo drivers/input/touchscreen/zet6223.ko | grep alias
alias:          i2c:zet6223

After this patch:

$ modinfo drivers/input/touchscreen/zet6223.ko | grep alias
alias:          of:N*T*Czeitec,zet6223C*
alias:          of:N*T*Czeitec,zet6223
alias:          i2c:zet6223

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoLinux 4.10
Linus Torvalds [Sun, 19 Feb 2017 22:34:00 +0000 (14:34 -0800)]
Linux 4.10

7 years agoFix missing sanity check in /dev/sg
Al Viro [Sun, 19 Feb 2017 07:15:27 +0000 (07:15 +0000)]
Fix missing sanity check in /dev/sg

What happens is that a write to /dev/sg is given a request with non-zero
->iovec_count combined with zero ->dxfer_len.  Or with ->dxferp pointing
to an array full of empty iovecs.

Having write permission to /dev/sg shouldn't be equivalent to the
ability to trigger BUG_ON() while holding spinlocks...

Found by Dmitry Vyukov and syzkaller.

[ The BUG_ON() got changed to a WARN_ON_ONCE(), but this fixes the
  underlying issue.  - Linus ]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoscsi: don't BUG_ON() empty DMA transfers
Johannes Thumshirn [Tue, 31 Jan 2017 09:16:00 +0000 (10:16 +0100)]
scsi: don't BUG_ON() empty DMA transfers

Don't crash the machine just because of an empty transfer. Use WARN_ON()
combined with returning an error.

Found by Dmitry Vyukov and syzkaller.

[ Changed to "WARN_ON_ONCE()". Al has a patch that should fix the root
  cause, but a BUG_ON() is not acceptable in any case, and a WARN_ON()
  might still be a cause of excessive log spamming.

  NOTE! If this warning ever triggers, we may end up leaking resources,
  since this doesn't bother to try to clean the command up. So this
  WARN_ON_ONCE() triggering does imply real problems. But BUG_ON() is
  much worse.

  People really need to stop using BUG_ON() for "this shouldn't ever
  happen". It makes pretty much any bug worse.     - Linus ]

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoipv6: release dst on error in ip6_dst_lookup_tail
Willem de Bruijn [Sun, 19 Feb 2017 00:00:45 +0000 (19:00 -0500)]
ipv6: release dst on error in ip6_dst_lookup_tail

If ip6_dst_lookup_tail has acquired a dst and fails the IPv4-mapped
check, release the dst before returning an error.

Fixes: ec5e3b0a1d41 ("ipv6: Inhibit IPv4-mapped src address on the wire.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
Linus Torvalds [Sun, 19 Feb 2017 01:38:09 +0000 (17:38 -0800)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Two more bugfixes that came in during this week:

   - a defconfig change to enable a vital driver used on some Qualcomm
     based phones. This was already queued for 4.11, but the maintainer
     asked to have it in 4.10 after all.

   - a regression fix for the reset controller framework, this got
     broken by a typo in the 4.10 merge window"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: multi_v7_defconfig: enable Qualcomm RPMCC
  reset: fix shared reset triggered_count decrement on error

7 years agoMerge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm
Linus Torvalds [Sun, 19 Feb 2017 01:36:15 +0000 (17:36 -0800)]
Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
 "A couple of fixes from Kees concerning problems he spotted with our
  user access support"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()
  ARM: 8657/1: uaccess: consistently check object sizes

7 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 19 Feb 2017 01:34:56 +0000 (17:34 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Thomas Gleixner:
 "Make the build clean by working around yet another GCC stupidity"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vm86: Fix unused variable warning if THP is disabled

7 years agoMerge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 19 Feb 2017 01:33:17 +0000 (17:33 -0800)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull locking fix from Thomas Gleixner:
 "Move the futex init function to core initcall so user mode helper does
  not run into an uninitialized futex syscall"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Move futex_init() to core_initcall

7 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 19 Feb 2017 01:30:36 +0000 (17:30 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
 "Two small fixes::

   - Prevent deadlock on the tick broadcast lock. Found and fixed by
     Mike.

   - Stop using printk() in the timekeeping debug code to prevent a
     deadlock against the scheduler"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Use deferred printk() in debug code
  tick/broadcast: Prevent deadlock on tick_broadcast_lock

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Sun, 19 Feb 2017 01:29:00 +0000 (17:29 -0800)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix leak in dpaa_eth error paths, from Dan Carpenter.

 2) Use after free when using IPV6_RECVPKTINFO, from Andrey Konovalov.

 3) fanout_release() cannot be invoked from atomic contexts, from Anoob
    Soman.

 4) Fix bogus attempt at lockdep annotation in IRDA.

 5) dev_fill_metadata_dst() can OOP on a NULL dst cache pointer, from
    Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  irda: Fix lockdep annotations in hashbin_delete().
  vxlan: fix oops in dev_fill_metadata_dst
  dccp: fix freeing skb too early for IPV6_RECVPKTINFO
  dpaa_eth: small leak on error
  packet: Do not call fanout_release from atomic contexts

7 years agoprintk: use rcuidle console tracepoint
Sergey Senozhatsky [Sat, 18 Feb 2017 11:42:54 +0000 (03:42 -0800)]
printk: use rcuidle console tracepoint

Use rcuidle console tracepoint because, apparently, it may be issued
from an idle CPU:

  hw-breakpoint: Failed to enable monitor mode on CPU 0.
  hw-breakpoint: CPU 0 failed to disable vector catch

  ===============================
  [ ERR: suspicious RCU usage.  ]
  4.10.0-rc8-next-20170215+ #119 Not tainted
  -------------------------------
  ./include/trace/events/printk.h:32 suspicious rcu_dereference_check() usage!

  other info that might help us debug this:

  RCU used illegally from idle CPU!
  rcu_scheduler_active = 2, debug_locks = 0
  RCU used illegally from extended quiescent state!
  2 locks held by swapper/0/0:
   #0:  (cpu_pm_notifier_lock){......}, at: [<c0237e2c>] cpu_pm_exit+0x10/0x54
   #1:  (console_lock){+.+.+.}, at: [<c01ab350>] vprintk_emit+0x264/0x474

  stack backtrace:
  CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc8-next-20170215+ #119
  Hardware name: Generic OMAP4 (Flattened Device Tree)
    console_unlock
    vprintk_emit
    vprintk_default
    printk
    reset_ctrl_regs
    dbg_cpu_pm_notify
    notifier_call_chain
    cpu_pm_exit
    omap_enter_idle_coupled
    cpuidle_enter_state
    cpuidle_enter_state_coupled
    do_idle
    cpu_startup_entry
    start_kernel

This RCU warning, however, is suppressed by lockdep_off() in printk().
lockdep_off() increments the ->lockdep_recursion counter and thus
disables RCU_LOCKDEP_WARN() and debug_lockdep_rcu_enabled(), which want
lockdep to be enabled "current->lockdep_recursion == 0".

Link: http://lkml.kernel.org/r/20170217015932.11898-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <rmk@armlinux.org.uk>
Cc: <stable@vger.kernel.org> [3.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoARM: multi_v7_defconfig: enable Qualcomm RPMCC
Andy Gross [Mon, 2 Jan 2017 20:35:05 +0000 (14:35 -0600)]
ARM: multi_v7_defconfig: enable Qualcomm RPMCC

This patch enables the Qualcomm RPM based Clock Controller present on
A-family boards.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
7 years agoInput: tsc2007 - add iio interface to read external ADC input and temperature
H. Nikolaus Schaller [Fri, 17 Feb 2017 20:53:32 +0000 (12:53 -0800)]
Input: tsc2007 - add iio interface to read external ADC input and temperature

The tsc2007 chip not only has a resistive touch screen controller but
also an external AUX adc imput which can be used for an ambient
light sensor, battery voltage monitoring or any general purpose.

Additionally it can measure the chip temperature.

This extension provides an iio interface for these adc channels.

Since it is not wasting much resources and is very straightforward,
we simply provide all other adc channels as optional iio interfaces
as weel. This can be used for debugging or special applications.

This patch also splits the tsc2007 driver in several source files:
tsc2007.h -- constants, structs and stubs
tsc2007_core.c -- functional parts of the original driver
tsc2007_iio.c -- the optional iio stuff

Makefile magic allows to conditionally link the iio stuff
if CONFIG_IIO=y or =m in a way that it works with
CONFIG_TOUCHSCREEN_TSC2007=m.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoInput: tsc2007 - check for presence and power down tsc2007 during probe
H. Nikolaus Schaller [Fri, 17 Feb 2017 20:51:19 +0000 (12:51 -0800)]
Input: tsc2007 - check for presence and power down tsc2007 during probe

1. check if chip is really present and don't succeed if it isn't.
2. if it succeeds, power down the chip until accessed

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
7 years agoirda: Fix lockdep annotations in hashbin_delete().
David S. Miller [Fri, 17 Feb 2017 21:19:39 +0000 (16:19 -0500)]
irda: Fix lockdep annotations in hashbin_delete().

A nested lock depth was added to the hasbin_delete() code but it
doesn't actually work some well and results in tons of lockdep splats.

Fix the code instead to properly drop the lock around the operation
and just keep peeking the head of the hashbin queue.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 17 Feb 2017 21:01:58 +0000 (13:01 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block layer fix from Jens Axboe:
 "A single fix for a lockdep splat reported by Thomas and Gabriel"

* 'for-linus' of git://git.kernel.dk/linux-block:
  cfq-iosched: don't call wbt_disable_default() with IRQs disabled

7 years agovxlan: fix oops in dev_fill_metadata_dst
Paolo Abeni [Fri, 17 Feb 2017 18:14:27 +0000 (19:14 +0100)]
vxlan: fix oops in dev_fill_metadata_dst

Since the commit 0c1d70af924b ("net: use dst_cache for vxlan device")
vxlan_fill_metadata_dst() calls vxlan_get_route() passing a NULL
dst_cache pointer, so the latter should explicitly check for
valid dst_cache ptr. Unfortunately the commit d71785ffc7e7 ("net: add
dst_cache to ovs vxlan lwtunnel") removed said check.

As a result is possible to trigger a null pointer access calling
vxlan_fill_metadata_dst(), e.g. with:

ovs-vsctl add-br ovs-br0
ovs-vsctl add-port ovs-br0 vxlan0 -- set interface vxlan0 \
type=vxlan options:remote_ip=192.168.1.1 \
options:key=1234 options:dst_port=4789 ofport_request=10
ip address add dev ovs-br0 172.16.1.2/24
ovs-vsctl set Bridge ovs-br0 ipfix=@i -- --id=@i create IPFIX \
targets=\"172.16.1.1:1234\" sampling=1
iperf -c 172.16.1.1 -u -l 1000 -b 10M -t 1 -p 1234

This commit addresses the issue passing to vxlan_get_route() the
dst_cache already available into the lwt info processed by
vxlan_fill_metadata_dst().

Fixes: d71785ffc7e7 ("net: add dst_cache to ovs vxlan lwtunnel")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agodccp: fix freeing skb too early for IPV6_RECVPKTINFO
Andrey Konovalov [Thu, 16 Feb 2017 16:22:46 +0000 (17:22 +0100)]
dccp: fix freeing skb too early for IPV6_RECVPKTINFO

In the current DCCP implementation an skb for a DCCP_PKT_REQUEST packet
is forcibly freed via __kfree_skb in dccp_rcv_state_process if
dccp_v6_conn_request successfully returns.

However, if IPV6_RECVPKTINFO is set on a socket, the address of the skb
is saved to ireq->pktopts and the ref count for skb is incremented in
dccp_v6_conn_request, so skb is still in use. Nevertheless, it gets freed
in dccp_rcv_state_process.

Fix by calling consume_skb instead of doing goto discard and therefore
calling __kfree_skb.

Similar fixes for TCP:

fb7e2399ec17f1004c0e0ccfd17439f8759ede01 [TCP]: skb is unexpectedly freed.
0aea76d35c9651d55bbaf746e7914e5f9ae5a25d tcp: SYN packets are now
simply consumed

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'powerpc-4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Fri, 17 Feb 2017 17:58:32 +0000 (09:58 -0800)]
Merge tag 'powerpc-4.10-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fix from Michael Ellerman:
 "One fix from Paul: we can not use the radix MMU under a hypervisor for
  now.

  Although the code checked if the processor supports radix, that is not
  sufficient"

* tag 'powerpc-4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64: Disable use of radix under a hypervisor

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Fri, 17 Feb 2017 17:56:34 +0000 (09:56 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fix from Dmitry Torokhov:
 "Just a single change to Elan touchpad driver to recognize a new ACPI
  ID"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - add ELAN0605 to the ACPI table

7 years agoMerge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa...
Linus Torvalds [Fri, 17 Feb 2017 17:53:59 +0000 (09:53 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fix from Wolfram Sang:
 "I2C has a revert to fix a regression"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Revert "i2c: designware: detect when dynamic tar update is possible"

7 years agoMerge tag 'mmc-v4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Linus Torvalds [Fri, 17 Feb 2017 17:52:33 +0000 (09:52 -0800)]
Merge tag 'mmc-v4.10-rc8' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fix from Ulf Hansson:
 "Fix multi-bit bus width without high-speed mode for MMC"

* tag 'mmc-v4.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: fix multi-bit bus width without high-speed mode

7 years agoMerge tag 'ntb-4.10-bugfixes' of git://github.com/jonmason/ntb
Linus Torvalds [Fri, 17 Feb 2017 17:51:05 +0000 (09:51 -0800)]
Merge tag 'ntb-4.10-bugfixes' of git://github.com/jonmason/ntb

Pull NTB bugfixes frfom Jon Mason:
 "NTB bug fixes to address a crash when unloading the ntb module, a DMA
  engine unmap leak, allowing the proper queue choice, and clearing the
  SKX irq bit"

* tag 'ntb-4.10-bugfixes' of git://github.com/jonmason/ntb:
  ntb: ntb_hw_intel: link_poll isn't clearing the pending status properly
  ntb_transport: Pick an unused queue
  ntb: ntb_perf missing dmaengine_unmap_put
  NTB: ntb_transport: fix debugfs_remove_recursive

7 years agodpaa_eth: small leak on error
Dan Carpenter [Thu, 16 Feb 2017 09:56:10 +0000 (12:56 +0300)]
dpaa_eth: small leak on error

This should be >= instead of > here.  It means that we don't increment
the free count enough so it becomes off by one.

Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux into...
Arnd Bergmann [Fri, 17 Feb 2017 16:25:15 +0000 (17:25 +0100)]
Merge tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux into fixes

Pull "Reset controller fixes for v4.10" from Philipp Zabel:

- Remove erroneous negation of the error check of the reset function
  to decrement trigger_count in the error case, not on success. This
  fixes shared resets to actually only trigger once, as intended.

* tag 'reset-for-4.10-fixes' of https://git.pengutronix.de/git/pza/linux:
  reset: fix shared reset triggered_count decrement on error

7 years agopacket: Do not call fanout_release from atomic contexts
Anoob Soman [Wed, 15 Feb 2017 20:25:39 +0000 (20:25 +0000)]
packet: Do not call fanout_release from atomic contexts

Commit 6664498280cf ("packet: call fanout_release, while UNREGISTERING a
netdev"), unfortunately, introduced the following issues.

1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside
rcu_read-side critical section. rcu_read_lock disables preemption, most often,
which prohibits calling sleeping functions.

[  ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section!
[  ]
[  ] rcu_scheduler_active = 1, debug_locks = 0
[  ] 4 locks held by ovs-vswitchd/1969:
[  ]  #0:  (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40
[  ]  #1:  (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch]
[  ]  #2:  (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20
[  ]  #3:  (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0
[  ]
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110
[  ]  [<ffffffff810a2da7>] ___might_sleep+0x57/0x210
[  ]  [<ffffffff810a2fd0>] __might_sleep+0x70/0x90
[  ]  [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0
[  ]  [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30
[  ]  [<ffffffff81186e88>] ? printk+0x4d/0x4f
[  ]  [<ffffffff816106dd>] fanout_release+0x1d/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock).
"sleeping function called from invalid context"

[  ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
[  ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd
[  ] INFO: lockdep is turned off.
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff810a2f52>] ___might_sleep+0x202/0x210
[  ]  [<ffffffff810a2fd0>] __might_sleep+0x70/0x90
[  ]  [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0
[  ]  [<ffffffff816106dd>] fanout_release+0x1d/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

3. calling dev_remove_pack(&fanout->prot_hook), from inside
spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack()
-> synchronize_net(), which might sleep.

[  ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002
[  ] INFO: lockdep is turned off.
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff81186274>] __schedule_bug+0x64/0x73
[  ]  [<ffffffff8162b8cb>] __schedule+0x6b/0xd10
[  ]  [<ffffffff8162c5db>] schedule+0x6b/0x80
[  ]  [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410
[  ]  [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810
[  ]  [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10
[  ]  [<ffffffff8154eab5>] synchronize_net+0x35/0x50
[  ]  [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20
[  ]  [<ffffffff8161077e>] fanout_release+0xbe/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

4. fanout_release() races with calls from different CPU.

To fix the above problems, remove the call to fanout_release() under
rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and
netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order
to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to
__fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure
fanout->prot_hook is removed as well.

Fixes: 6664498280cf ("packet: call fanout_release, while UNREGISTERING a netdev")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoreset: fix shared reset triggered_count decrement on error
Jerome Brunet [Wed, 15 Feb 2017 18:15:51 +0000 (19:15 +0100)]
reset: fix shared reset triggered_count decrement on error

For a shared reset, when the reset is successful, the triggered_count is
incremented when trying to call the reset callback, so that another device
sharing the same reset line won't trigger it again. If the reset has not
been triggered successfully, the trigger_count should be decremented.

The code does the opposite, and decrements the trigger_count on success.
As a consequence, another device sharing the reset will be able to trigger
it again.

Fixed be removing negation in from of the error code of the reset function.

Fixes: 7da33a37b48f ("reset: allow using reset_control_reset with shared reset")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
7 years agontb: ntb_hw_intel: link_poll isn't clearing the pending status properly
Dave Jiang [Thu, 16 Feb 2017 23:22:36 +0000 (16:22 -0700)]
ntb: ntb_hw_intel: link_poll isn't clearing the pending status properly

On Skylake hardware, the link_poll isn't clearing the pending interrupt
bit.  Adding a new function for SKX that handles clearing of status bit the
right way.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 783dfa6c ("ntb: Adding Skylake Xeon NTB support")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
7 years agontb_transport: Pick an unused queue
Thomas VanSelus [Mon, 13 Feb 2017 22:46:26 +0000 (16:46 -0600)]
ntb_transport: Pick an unused queue

Fix typo causing ntb_transport_create_queue to select the first
queue every time, instead of using the next free queue.

Signed-off-by: Thomas VanSelus <tvanselus@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: fce8a7bb5 ("PCI-Express Non-Transparent Bridge Support")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
7 years agontb: ntb_perf missing dmaengine_unmap_put
Dave Jiang [Mon, 30 Jan 2017 21:21:17 +0000 (14:21 -0700)]
ntb: ntb_perf missing dmaengine_unmap_put

In the normal I/O execution path, ntb_perf is missing a call to
dmaengine_unmap_put() after submission. That causes us to leak
unmap objects.

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 8a7b6a77 ("ntb: ntb perf tool")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
7 years agoNTB: ntb_transport: fix debugfs_remove_recursive
Allen Hubbe [Tue, 27 Dec 2016 22:57:04 +0000 (17:57 -0500)]
NTB: ntb_transport: fix debugfs_remove_recursive

The call to debugfs_remove_recursive(qp->debugfs_dir) of the sub-level
directory must not be later than
debugfs_remove_recursive(nt_debugfs_dir) of the top-level directory.
Otherwise, the sub-level directory will not exist, and it would be
invalid (panic) to attempt to remove it.  This removes the top-level
directory last, after sub-level directories have been cleaned up.

Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com>
Fixes: e26a5843f ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Jon Mason <jdmason@kudzu.us>
7 years agoMerge tag 'drm-fixes-for-v4.10-final' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 17 Feb 2017 02:44:38 +0000 (18:44 -0800)]
Merge tag 'drm-fixes-for-v4.10-final' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Just two last minute fixes, one for DP MST oopses and one for a radeon
  regression"

* tag 'drm-fixes-for-v4.10-final' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor
  drm/dp/mst: fix kernel oops when turning off secondary monitor

7 years agoMerge branch 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Fri, 17 Feb 2017 01:13:17 +0000 (11:13 +1000)]
Merge branch 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

One regression fix for interlaced modes on radeon

* 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor

7 years agoRevert "nohz: Fix collision between tick and other hrtimers"
Linus Torvalds [Thu, 16 Feb 2017 20:19:18 +0000 (12:19 -0800)]
Revert "nohz: Fix collision between tick and other hrtimers"

This reverts commit 24b91e360ef521a2808771633d76ebc68bd5604b and commit
7bdb59f1ad47 ("tick/nohz: Fix possible missing clock reprog after tick
soft restart") that depends on it,

Pavel reports that it causes occasional boot hangs for him that seem to
depend on just how the machine was booted.  In particular, his machine
hangs at around the PCI fixups of the EHCI USB host controller, but only
hangs from cold boot, not from a warm boot.

Thomas Gleixner suspecs it's a CPU hotplug interaction, particularly
since Pavel also saw suspend/resume issues that seem to be related.
We're reverting for now while trying to figure out the root cause.

Reported-bisected-and-tested-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org # reverted commits were marked for stable
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoMerge tag 'media/v4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Thu, 16 Feb 2017 18:22:41 +0000 (10:22 -0800)]
Merge tag 'media/v4.10-5' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fix from Mauro Carvalho Chehab:
 "A regression fix that makes the Siano driver to work again after the
  CONFIG_VMAP_STACK change"

* tag 'media/v4.10-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] siano: make it work again with CONFIG_VMAP_STACK

7 years agovfs: fix uninitialized flags in splice_to_pipe()
Miklos Szeredi [Thu, 16 Feb 2017 16:49:02 +0000 (17:49 +0100)]
vfs: fix uninitialized flags in splice_to_pipe()

Flags (PIPE_BUF_FLAG_PACKET, PIPE_BUF_FLAG_GIFT) could remain on the
unused part of the pipe ring buffer.  Previously splice_to_pipe() left
the flags value alone, which could result in incorrect behavior.

Uninitialized flags appears to have been there from the introduction of
the splice syscall.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # 2.6.17+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi...
Linus Torvalds [Thu, 16 Feb 2017 17:05:34 +0000 (09:05 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mszeredi/fuse

Pull fuse fixes from Miklos Szeredi:
 "Fix a use after free bug introduced in 4.2 and using an uninitialized
  value introduced in 4.9"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix uninitialized flags in pipe_buffer
  fuse: fix use after free issue in fuse_dev_do_read()

7 years agoMerge tag 'pci-v4.10-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaa...
Linus Torvalds [Thu, 16 Feb 2017 17:03:37 +0000 (09:03 -0800)]
Merge tag 'pci-v4.10-fixes-4' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fix from Bjorn Helgaas:
 "Add back pcie_pme_remove() so we free the IRQ when removing PCIe port
  devices; previously the leaked IRQ caused an MSI BUG_ON"

* tag 'pci-v4.10-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/PME: Restore pcie_pme_driver.remove

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Thu, 16 Feb 2017 16:37:18 +0000 (08:37 -0800)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) In order to avoid problems in the future, make cgroup bpf overriding
    explicit using BPF_F_ALLOW_OVERRIDE. From Alexei Staovoitov.

 2) LLC sets skb->sk without proper skb->destructor and this explodes,
    fix from Eric Dumazet.

 3) Make sure when we have an ipv4 mapped source address, the
    destination is either also an ipv4 mapped address or
    ipv6_addr_any(). Fix from Jonathan T. Leighton.

 4) Avoid packet loss in fec driver by programming the multicast filter
    more intelligently. From Rui Sousa.

 5) Handle multiple threads invoking fanout_add(), fix from Eric
    Dumazet.

 6) Since we can invoke the TCP input path in process context, without
    BH being disabled, we have to accomodate that in the locking of the
    TCP probe. Also from Eric Dumazet.

 7) Fix erroneous emission of NETEVENT_DELAY_PROBE_TIME_UPDATE when we
    aren't even updating that sysctl value. From Marcus Huewe.

 8) Fix endian bugs in ibmvnic driver, from Thomas Falcon.

[ This is the second version of the pull that reverts the nested
  rhashtable changes that looked a bit too scary for this late in the
  release  - Linus ]

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
  rhashtable: Revert nested table changes.
  ibmvnic: Fix endian errors in error reporting output
  ibmvnic: Fix endian error when requesting device capabilities
  net: neigh: Fix netevent NETEVENT_DELAY_PROBE_TIME_UPDATE notification
  net: xilinx_emaclite: fix freezes due to unordered I/O
  net: xilinx_emaclite: fix receive buffer overflow
  bpf: kernel header files need to be copied into the tools directory
  tcp: tcp_probe: use spin_lock_bh()
  uapi: fix linux/if_pppol2tp.h userspace compilation errors
  packet: fix races in fanout_add()
  ibmvnic: Fix initial MTU settings
  net: ethernet: ti: cpsw: fix cpsw assignment in resume
  kcm: fix a null pointer dereference in kcm_sendmsg()
  net: fec: fix multicast filtering hardware setup
  ipv6: Handle IPv4-mapped src to in6addr_any dst.
  ipv6: Inhibit IPv4-mapped src address on the wire.
  net/mlx5e: Disable preemption when doing TC statistics upcall
  rhashtable: Add nested tables
  tipc: Fix tipc_sk_reinit race conditions
  gfs2: Use rhashtable walk interface in glock_hash_walk
  ...

7 years agodrm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor
Michel Dänzer [Wed, 15 Feb 2017 02:28:45 +0000 (11:28 +0900)]
drm/radeon: Use mode h/vdisplay fields to hide out of bounds HW cursor

The crtc_h/vdisplay fields may not match the CRTC viewport dimensions
with special modes such as interlaced ones.

Fixes the HW cursor disappearing in the bottom half of the screen with
interlaced modes.

Fixes: 6b16cf7785a4 ("drm/radeon: Hide the HW cursor while it's out of bounds")
Cc: stable@vger.kernel.org
Reported-by: Ashutosh Kumar <ashutosh.kumar@amd.com>
Tested-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
7 years agoARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()
Kees Cook [Thu, 16 Feb 2017 00:44:37 +0000 (01:44 +0100)]
ARM: 8658/1: uaccess: fix zeroing of 64-bit get_user()

The 64-bit get_user() wasn't clearing the high word due to a typo in the
error handler. The exception handler entry was already correct, though.
Noticed during recent usercopy test additions in lib/test_user_copy.c.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
7 years agoARM: 8657/1: uaccess: consistently check object sizes
Kees Cook [Thu, 16 Feb 2017 00:43:58 +0000 (01:43 +0100)]
ARM: 8657/1: uaccess: consistently check object sizes

In commit 76624175dcae ("arm64: uaccess: consistently check object sizes"),
the object size checks are moved outside the access_ok() so that bad
destinations are detected before hitting the "memset(dest, 0, size)" in the
copy_from_user() failure path.

This makes the same change for arm, with attention given to possibly
extracting the uaccess routines into a common header file for all
architectures in the future.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
7 years agocfq-iosched: don't call wbt_disable_default() with IRQs disabled
Jens Axboe [Thu, 16 Feb 2017 14:57:33 +0000 (07:57 -0700)]
cfq-iosched: don't call wbt_disable_default() with IRQs disabled

wbt_disable_default() calls del_timer_sync() to wait for the wbt
timer to finish before disabling throttling. We can't do this with
IRQs disable. This fixes a lockdep splat on boot, if non-root
cgroups are used.

Reported-by: Gabriel C <nix.or.die@gmail.com>
Fixes: 87760e5eef35 ("block: hook up writeback throttling")
Signed-off-by: Jens Axboe <axboe@fb.com>
7 years agofuse: fix uninitialized flags in pipe_buffer
Miklos Szeredi [Thu, 16 Feb 2017 14:08:20 +0000 (15:08 +0100)]
fuse: fix uninitialized flags in pipe_buffer

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: d82718e348fe ("fuse_dev_splice_read(): switch to add_to_pipe()")
Cc: <stable@vger.kernel.org> # 4.9+
7 years agorhashtable: Revert nested table changes.
David S. Miller [Thu, 16 Feb 2017 03:29:51 +0000 (22:29 -0500)]
rhashtable: Revert nested table changes.

This reverts commits:

6a25478077d987edc5e2f880590a2bc5fcab4441
9dbbfb0ab6680c6a85609041011484e6658e7d3c
40137906c5f55c252194ef5834130383e639536f

It's too risky to put in this late in the release
cycle.  We'll put these changes into the next merge
window instead.

Signed-off-by: David S. Miller <davem@davemloft.net>