John Crispin [Wed, 23 Dec 2015 14:43:47 +0000 (14:43 +0000)]
firmware-utils: allow mkfwimage2 to use - in partition names
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 47975
John Crispin [Fri, 11 Dec 2015 15:09:30 +0000 (15:09 +0000)]
firmware-utils: fix various compiler warnings
mostly implicit defines due to missing includes plus one const that
shouldn't be one.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
SVN-Revision: 47865
John Crispin [Fri, 11 Dec 2015 15:08:44 +0000 (15:08 +0000)]
mktplinkfw: add missing exceeding bytes info to logs
Add the info on exceeding bytes also to the remaining log messages.
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
SVN-Revision: 47864
John Crispin [Fri, 11 Dec 2015 15:06:45 +0000 (15:06 +0000)]
firmware-utils mkmerakifw: firmware generator for MR18
This patch adds firmware generation tool for Cisco's MR18
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
SVN-Revision: 47856
Jonas Gorski [Wed, 4 Nov 2015 11:33:22 +0000 (11:33 +0000)]
brcm63xx: work around boot failures with squashfs on BCM6368
Due to the LWL/LWR SMP issue on BCM6368, booting with squash might fail
if the rootfs is not word aligned. As a quick fix, work around it by
ensuring this condition is always true.
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47380
John Crispin [Mon, 19 Oct 2015 10:10:02 +0000 (10:10 +0000)]
ar71xx: Bitmain Antminer S1 & S3 cleanup
Sets the LEDs to boardname:color:led-name
Sets the LAN to eth0
Other corrections such as the Machine Name and HWIDs
v2 corrects the profile names in the Makefile and changes tabs to spaces
in the Makefile 'define Device/' like the other devices.
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 47221
John Crispin [Mon, 19 Oct 2015 10:08:50 +0000 (10:08 +0000)]
tools/firmware-utils: tplink-safeloader: add version 1.1 support to CPE210/220/510/520
The hardware is identical to version 1.0, add the new models to the support
list.
Also remove the empty line at the end of the support list, the current
stock images don't have it either.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47212
John Crispin [Mon, 19 Oct 2015 10:08:44 +0000 (10:08 +0000)]
tools/firmware-utils: tplink-safeloader: fix support-list format, clean up vendor information
The first 4 bytes of the support list and the vendor information are
supposed to contain the length of these fields.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47211
John Crispin [Mon, 19 Oct 2015 10:08:34 +0000 (10:08 +0000)]
tools/firmware-utils: tplink-safeloader: clean up code
There is no reason for the internal functions not to be static.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 47210
Felix Fietkau [Mon, 12 Oct 2015 13:11:20 +0000 (13:11 +0000)]
firmware-utils/buffalo-enc: explicitly use signed char for checksum function
ARM defaults to unsigned char and that breaks the calculation, as it
relies on sign extension
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47186
Felix Fietkau [Mon, 12 Oct 2015 13:11:03 +0000 (13:11 +0000)]
firmware-utils/buffalo-enc: add support for decrypting data with an offset
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47185
Hauke Mehrtens [Sun, 11 Oct 2015 19:00:41 +0000 (19:00 +0000)]
tools: firmware-utils: fix compiler warnings
This just fixes a lot of compiler warnings.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47181
John Crispin [Mon, 5 Oct 2015 10:28:19 +0000 (10:28 +0000)]
lantiq: Add target TP-Link TD-W8980
The device is similar to the TD-W8970, beside a different Atheros 2.4 GHz
wireless chip and the additional, PCI connected, WAVE300 5 GHz wireless.
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
SVN-Revision: 47130
John Crispin [Mon, 17 Aug 2015 06:23:43 +0000 (06:23 +0000)]
tools/firmware-utils: add header version 2 support for mktplinkfw
Signed-off-by: Weijie Gao <hackpascal@gmail.com>
This patch adds header version 2 option for mktplinkfw.
The version 2 header is used for AR/QCA firmwares and is not the same as
the header generated by mktplinkfw2.
Instead, it is nearly the same as version 1 header except for the header
version and the RSA signature.
The header version 2 support is used for newer TP-Link routers which have
only a 64kb bootloader part, e.g. TL-WDR6500 v2.
SVN-Revision: 46661
John Crispin [Fri, 24 Jul 2015 09:11:24 +0000 (09:11 +0000)]
firmware-utils mktplinkfw: print amount of exceeding bytes
This is very useful for trimming images towards 4 MiB flash size.
Signed-off-by: Stephan Maka <stephan@spaceboyz.net>
SVN-Revision: 46469
John Crispin [Fri, 24 Jul 2015 09:09:49 +0000 (09:09 +0000)]
ar71xx: add support for Onion Omega
This patch adds support for the Onion Omega.
https://onion.io/omega
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: Boken Lin <bl@onion.io>
Tested-by: Jacky Huang <huangfangcheng@163.com>
SVN-Revision: 46458
John Crispin [Tue, 7 Jul 2015 13:46:54 +0000 (13:46 +0000)]
ar71xx: Add Support for the Bitmain Antminer S3
This patch adds support for the Bitmain Antminer S3 Cryptocurrency Miner
http://wiki.openwrt.org/toh/bitmain/s3
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 46236
John Crispin [Thu, 18 Jun 2015 18:21:23 +0000 (18:21 +0000)]
ar71xx: add support for TL-WR720N-v4.
The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks
were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch
were tested by "Wong min <alpha080@gmail.com>".
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 46046
John Crispin [Thu, 18 Jun 2015 18:21:05 +0000 (18:21 +0000)]
ar71xx: Add Support for the Bitmain Antminer S1
This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner
http://wiki.openwrt.org/toh/bitmain/s1
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: James Hilliard <james.hilliard1@gmail.com>
SVN-Revision: 46044
Felix Fietkau [Sun, 14 Jun 2015 17:41:21 +0000 (17:41 +0000)]
firmware-tools/ptgen: use stdint types for struct pte
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45957
Felix Fietkau [Sun, 14 Jun 2015 17:41:16 +0000 (17:41 +0000)]
firmware-tools/ptgen: fix endianness conversion for PTE .start, .length field.
They are of 32-bit little endian integers.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 45956
John Crispin [Wed, 3 Jun 2015 13:58:48 +0000 (13:58 +0000)]
tools/firmware-utils: Allow changing the CRC32 poly value in mkbrnimg
VGV7519 is currently the only device with brnboot support. It seems to
be happy with 0x2083b8ed as CRC32 poly. However, VGV7510KW22 fails to
validate the checksum - it requires 0x04c11db7 instead.
I have built an brnboot image manually on the command line, once with
the old code and then with the new code but passing the old CRC32
poly value. Both resulted in a brnboot image with the same sha1sum.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 45881
Rafał Miłecki [Wed, 27 May 2015 17:58:11 +0000 (17:58 +0000)]
firmware-utils: asustrx: support setting firmware version
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45791
Rafał Miłecki [Wed, 27 May 2015 13:54:02 +0000 (13:54 +0000)]
firmware-utils: asustrx: new tool for TRX format with Asus tail
Asus devices use TRX format with some extra data at the end.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45773
Felix Fietkau [Fri, 8 May 2015 14:02:33 +0000 (14:02 +0000)]
mktplinkfw: add flag to ignore size limit (used for initramfs images)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45644
Jonas Gorski [Fri, 27 Feb 2015 17:38:14 +0000 (17:38 +0000)]
brcm63xx: do not align squashfs rootfs start
We do not need to align the start of read only rootfs's to erase blocks.
This allows us to write the squashfs rootfs directly behind the kernel,
potentially freeing up one erase block.
We still need to align for jffs2, so add a flag for imagetag to
optionally align the rootfs start.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44556
Jonas Gorski [Fri, 27 Feb 2015 17:38:05 +0000 (17:38 +0000)]
firmware-utils: imagetag: use cyg_crc32 instead of duplicating code
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44554
John Crispin [Tue, 24 Feb 2015 12:00:50 +0000 (12:00 +0000)]
ar71xx: TL-WA7210n v2 support
This patch adds support for TP-Link TL-WA7210n[0]
[0] http://www.tplink.com/en/products/details/?model=TL-WA7210N
Signed-off-by: Hendrik Frenzel <hfrenzel@scunc.net>
SVN-Revision: 44526
Jo-Philipp Wich [Fri, 6 Feb 2015 00:00:43 +0000 (00:00 +0000)]
tools: remove static linking support
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44285
John Crispin [Mon, 2 Feb 2015 10:32:04 +0000 (10:32 +0000)]
ar71xx: Revert "added board support for compex wpj558"
This reverts commit
f7873071561d82e75ba2dc46433a2982fef8ac6f.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44245
John Crispin [Mon, 2 Feb 2015 09:00:21 +0000 (09:00 +0000)]
added board support for compex wpj558
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
SVN-Revision: 44237
John Crispin [Tue, 20 Jan 2015 15:48:07 +0000 (15:48 +0000)]
ar71xx: add support for TL-WA701ND v2
Signed-off-by: Luigi Tarenga <luigi.tarenga@gmail.com>
SVN-Revision: 44063
Florian Fainelli [Sat, 10 Jan 2015 18:08:16 +0000 (18:08 +0000)]
tools: edimax_fw_header: fix suspicious memset usage
memset() was called with a size argument against a pointer size, not the
structure size itself.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43913
Felix Fietkau [Fri, 9 Jan 2015 15:40:39 +0000 (15:40 +0000)]
tools/firmware-utils: add version 3 header support for mktplinkfw2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43897
Felix Fietkau [Sat, 20 Dec 2014 15:26:31 +0000 (15:26 +0000)]
buffalo-enc: pass the longstate option to decryption
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43756
Felix Fietkau [Sat, 20 Dec 2014 15:26:25 +0000 (15:26 +0000)]
buffalo-enc: accept the longstate command line option
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43755
Imre Kaloz [Wed, 17 Dec 2014 08:27:38 +0000 (08:27 +0000)]
Belkin AC 1750 DB (F9K1115v2) support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43734
John Crispin [Sun, 7 Dec 2014 16:53:22 +0000 (16:53 +0000)]
ramips: generate factory images for Nexx devices
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 43541
Felix Fietkau [Thu, 27 Nov 2014 15:01:56 +0000 (15:01 +0000)]
firmware-utils: remove dependency on error.h in tplink-safeloader
Fixes build on Mac OS X
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43402
John Crispin [Wed, 26 Nov 2014 08:59:22 +0000 (08:59 +0000)]
firmware-utils: add new tool tplink-safeloader for the new TP-LINK Pharos devices (CPE210/220/510/520)
The new TP-LINK Pharos series uses a new bootloader, the "TP-LINK Safeloader".
It uses an advanced firmware image format, containing an image partition table
and a flash partition table (and image partitions are mapped to the
corresponding flash partitions). The exact image format is documented in the
source code.
Furthermore, the bootloader expects the kernel image as an ELF executable.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 43384
John Crispin [Wed, 29 Oct 2014 11:01:17 +0000 (11:01 +0000)]
ramips: add support for A5-V11 board (resubmit)
(Reposted due to an issue with the patchwork server during original submission)
Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key)
Signed-off-by: Gareth Bryan <gareth@mx9.org>
SVN-Revision: 43102
Felix Fietkau [Mon, 20 Oct 2014 09:18:36 +0000 (09:18 +0000)]
firmware-utils: rename encrypt()/decrypt() in mkhilinkfw to avoid collisions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42998
John Crispin [Mon, 20 Oct 2014 06:29:38 +0000 (06:29 +0000)]
firmware-utils: restore compilation of mkhilinkfw.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42989
John Crispin [Mon, 20 Oct 2014 06:29:13 +0000 (06:29 +0000)]
firmware-utils: fix compilation warnings.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42986
Jo-Philipp Wich [Thu, 16 Oct 2014 16:16:47 +0000 (16:16 +0000)]
firmware-utils: allow passing a specific MBR signature to ptgen
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42934
John Crispin [Mon, 6 Oct 2014 04:52:01 +0000 (04:52 +0000)]
firmware-utils: add NEXX factory image support
This patch adds support to encode and decode images for certain types of
NEXX routers.
SVN-Revision: 42784
John Crispin [Sun, 3 Aug 2014 11:13:58 +0000 (11:13 +0000)]
firmware-utils: made mkdir615h1 work for all Senao-produced devices as mksenaofw and cleaned up some of its formatting
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
SVN-Revision: 41962
Jonas Gorski [Sun, 27 Jul 2014 17:44:51 +0000 (17:44 +0000)]
firmware-utils: add new tool for fixing headers on ZyXEL devices (brcm63xx)
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41849
Gabor Juhos [Sun, 13 Jul 2014 18:21:08 +0000 (18:21 +0000)]
firmware-utils/mktplinkfw: add support for GL.iNet v1
Patch is based on http://patchwork.openwrt.org/patch/5273/.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Mark Janssen <mark@sig-io.nl>
Signed-off-by: alzhao <alzhao@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5653/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41620
John Crispin [Tue, 24 Jun 2014 18:13:00 +0000 (18:13 +0000)]
firmware-utils/mkdir615h1: fix magic XOR calculation
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
SVN-Revision: 41314
John Crispin [Tue, 17 Jun 2014 15:38:54 +0000 (15:38 +0000)]
lantiq: DGN3500 (all known variants) factory and sysupgrade image building support
This patch adds factory image building for the DGN3500, all variants,
and fixes sysupgrade images to make them play nice with the sercomm
secondary boot loader.
The factory images can be used directly in the update dialog in the
interface of the stock firmware and via the special Sercomm bootmode
and a special windows flashing utility (allegedly present in the CD
that came with the device -- but it's also compatible with the NSLU2
Upgrade_207_XP utility.) The special bootmode can be activated by
turning the device on while holding the reset button pressed, then
releasing it when the power led starts blinking red and green. Please
notice that if using the 207 utility, it will always report that the
flashing failed even though it completed successfully. Just power
cycle the router manually after the utility reports the failure and
OpenWRT will boot. This same utility (despite reporting failure in
this case too) can revert a DGN3500 (any variant) to the appropriate
stock Netgear firmware.
This patch is a heavily modified version of a package I found on the
OpenWRT forum with a couple fixes and features added -- mainly the
generation of all the different image variants to support all known
models directly, atm known variants are AnnexA-WW, AnnexA-NA and
AnnexB-DE/GR.
I tested the patch successfully on my device.
Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>
SVN-Revision: 41236
John Crispin [Mon, 16 Jun 2014 18:57:20 +0000 (18:57 +0000)]
ramips: RT-N56U support fixes and factory image creation
Signed-off-by: Mikko Hissa <mikko.hissa@werzek.com>
SVN-Revision: 41224
John Crispin [Tue, 22 Apr 2014 08:08:39 +0000 (08:08 +0000)]
firmware-utils: add Gemtek header tool
Generates webflash-compatible images for a few RT2880 routers based
on Gemtek OEM boards.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 40551
Gabor Juhos [Thu, 27 Mar 2014 06:36:58 +0000 (06:36 +0000)]
firmware-utils/mktplinkfw: add support for TL-WDR4300v1 (IL)
The version of TL-WDR4300 sold in Israel comes with a different
hardware id.
Patch-by: Daniel <daniel@makrotopia.org>
Patchwork: http://patchwork.openwrt.org/patch/5001/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40037
Gabor Juhos [Thu, 27 Mar 2014 06:36:49 +0000 (06:36 +0000)]
firmware-utils/mktplinkfw: add support for the Oolite v1 board
Patch-by: Lars Bøgild Thomsen <lth@cow.dk>
Patchwork: http://patchwork.openwrt.org/patch/4922/
[juhosg: fix whitespaces]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40035
Gabor Juhos [Thu, 27 Mar 2014 06:36:48 +0000 (06:36 +0000)]
firmware-utils/mktplinkfw: add an option to generate 16MiB images
Signed-off-by: Andrew 'Necromant' Andrianov <andrew@ncrmnt.org>
Patchwork: http://patchwork.openwrt.org/patch/2449/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40034
Gabor Juhos [Sat, 25 Jan 2014 18:12:03 +0000 (18:12 +0000)]
firmware-utils/mktplinkfw: allow to reserve space in the generated images
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39396
John Crispin [Sun, 12 Jan 2014 17:26:24 +0000 (17:26 +0000)]
ralink: don't build mkhilinkfw untilt he ssl header dependency is resolved
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39248
John Crispin [Sun, 12 Jan 2014 14:03:05 +0000 (14:03 +0000)]
firmware-utils: mkhilinkfw breaks the build bots
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39243
John Crispin [Sun, 12 Jan 2014 12:07:46 +0000 (12:07 +0000)]
firmware-utils: add HLK-RM04 tool
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39238
John Crispin [Fri, 27 Dec 2013 21:15:31 +0000 (21:15 +0000)]
firmware-utils: check_magic() in buffalo-lib.c always return 0
spotted with cppcheck
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 39171
Gabor Juhos [Sun, 15 Dec 2013 20:39:13 +0000 (20:39 +0000)]
firmware-utils/mkplinkfw: add TL-WA801ND v2 support
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Patchwork: http://patchwork.openwrt.org/patch/4503/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39066
Gabor Juhos [Sat, 30 Nov 2013 18:30:57 +0000 (18:30 +0000)]
firmware-utils/trx: remove trailing whitespaces
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38963
Gabor Juhos [Sat, 30 Nov 2013 18:30:56 +0000 (18:30 +0000)]
firmware-utils/trx: fix two bugs
- fix crc32 calculation if -F was enabled.
- don't convert the crc32 to little endian twice.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
SVN-Revision: 38962
Gabor Juhos [Fri, 29 Nov 2013 20:51:15 +0000 (20:51 +0000)]
firmware-utils/mkplinkfw: add TL-WR1043ND v2 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38957
Gabor Juhos [Thu, 7 Nov 2013 22:31:48 +0000 (22:31 +0000)]
tools: adapt addpattern for WD's Range Extender
A few things had to be changed to add support for these devices:
- support code patterns with 8 characters
- new board definition for the range extender device
Patchwork: http://patchwork.openwrt.org/patch/4280/
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38685
Gabor Juhos [Wed, 6 Nov 2013 10:16:40 +0000 (10:16 +0000)]
firmware-utils: remove the wndr3700 utility
It is not used anymore.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38663
Gabor Juhos [Sun, 20 Oct 2013 15:59:08 +0000 (15:59 +0000)]
mkfwimage: Increase RSPRO maximum size to 0xF00000 (15 MiB)
RSPRO has 16MiB of Flash, using the following layout:
[ 2.930000] 0x000000000000-0x000000030000 : "RedBoot"
[ 2.940000] 0x000000030000-0x000000130000 : "kernel"
[ 2.950000] 0x000000130000-0x000000ff0000 : "rootfs"
[ 2.960000] 0x000000ff0000-0x000000fff000 : "FIS directory"
[ 2.970000] 0x000000fff000-0x000001000000 : "RedBoot config"
Firmware images contain kernel and rootfs, so they can use up to 0xFF0000 -
0x30000 = 0xFC0000 (15,75MiB) of space. We don't include the RedBoot and FIS
partitions and leave an extra 0xC0000 (768KiB) of space.
This is based on revision 18410 which sets the limit to 0xB00000 (11 MiB).
Signed-off-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38484
John Crispin [Mon, 7 Oct 2013 15:01:05 +0000 (15:01 +0000)]
tools: add tool to generate dcs93xl images
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38317
Gabor Juhos [Thu, 19 Sep 2013 17:52:44 +0000 (17:52 +0000)]
firmware-utils/mktplinkfw: add support for the TL-MR13U board
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38065
John Crispin [Tue, 6 Aug 2013 16:25:35 +0000 (16:25 +0000)]
firmware-utils: add a tool TP-Link v2 image generation
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37726
John Crispin [Tue, 6 Aug 2013 16:25:24 +0000 (16:25 +0000)]
firmware-utils: remove v2 support
we will use gabors patch instead
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37725
John Crispin [Tue, 6 Aug 2013 14:32:50 +0000 (14:32 +0000)]
firmware-utils: fix segfault introduced by v2 changes
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 37724
John Crispin [Tue, 6 Aug 2013 12:31:06 +0000 (12:31 +0000)]
firmware-utils: add support for TDW8970 to mktplinkfw
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37718
John Crispin [Tue, 6 Aug 2013 12:30:52 +0000 (12:30 +0000)]
firmware-utils: add v2 header support to firmware-utils
only image build works. inspect and md5 checksum support are not implemented yet
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 37717
John Crispin [Thu, 1 Aug 2013 14:30:46 +0000 (14:30 +0000)]
ramips: add basics for Poray devices
This commit adds the basic elements to support Poray brand routers.
It contains a tool to do the encryption/obfuscation that is used in
Poray routers.
Support for Poray devices was worked on by:
Felix Kaechele <heffer@fedoraproject.org>
Luis Soltero <lsoltero@globalmarinenet.com>
Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 37635
Gabor Juhos [Fri, 26 Jul 2013 07:32:00 +0000 (07:32 +0000)]
firmware-utils/mktplinkfw: add support for the TL-MR10U board
Based on andelf's patch:
http://andelf.diandian.com/post/2013-05-22/
40050677370
Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37549
Florian Fainelli [Thu, 6 Jun 2013 22:21:52 +0000 (22:21 +0000)]
tools: add Broadcom cable modem firmware image creator
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36873
Gabor Juhos [Wed, 8 May 2013 17:11:08 +0000 (17:11 +0000)]
firmware-utils/mkcameofw: allow to use combined kernel image
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36583
Gabor Juhos [Tue, 30 Apr 2013 10:44:10 +0000 (10:44 +0000)]
firmware-utils/mktplinkfw: add description for -W option into usage output
Add description for -W <hwrev> option into usage output of mktplinkfw.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36497
Gabor Juhos [Fri, 26 Apr 2013 17:00:47 +0000 (17:00 +0000)]
firmware-utils/mktplinkfw: add support for the TL-WR720N v3 board
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36455
John Crispin [Tue, 9 Apr 2013 14:19:33 +0000 (14:19 +0000)]
Add Netgear WNCE2001 (OF version)
Add Netgear WNCE2001.
This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.
Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming
The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.
The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.
http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36289
Gabor Juhos [Mon, 11 Mar 2013 15:55:23 +0000 (15:55 +0000)]
firmware-utils/mktplinkfw: Add support for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3441/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35963
Gabor Juhos [Mon, 25 Feb 2013 20:37:32 +0000 (20:37 +0000)]
firmware-utils/mktplinkfw: add support for the TL-WA830RE v1/v2 boards
Signed-off-by: Ronald Hecht <ronald.hecht@gmx.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35787
Gabor Juhos [Wed, 13 Feb 2013 16:51:24 +0000 (16:51 +0000)]
firmware-utils/mktplinkfw: add support for the TL-WDR4900 v1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35593
Gabor Juhos [Sat, 2 Feb 2013 10:01:11 +0000 (10:01 +0000)]
firmware-utils/mktplinkfw: add TP-LINK TL-WR743ND v2 support
AR9331 based, these same as 741v4
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35448
John Crispin [Sun, 6 Jan 2013 11:11:30 +0000 (11:11 +0000)]
adds support for Edimax BR-6524N
fixes #12754
Signed-off-by: <rq@akl.lt>
SVN-Revision: 35019
Gabor Juhos [Wed, 19 Dec 2012 08:50:43 +0000 (08:50 +0000)]
firmware-utils/mktplinkfw: add support for the TL-MR3220 v2
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34781
Gabor Juhos [Mon, 17 Dec 2012 12:28:15 +0000 (12:28 +0000)]
firmware-utils/mkfwimage2: allow to use numbers in partition names
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34729
Gabor Juhos [Fri, 7 Dec 2012 19:10:54 +0000 (19:10 +0000)]
firmware-utils/mktplinkfw: add support for TP-LINK WA801NDv1
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34575
Gabor Juhos [Tue, 13 Nov 2012 14:48:02 +0000 (14:48 +0000)]
firmware-utils/mktplinkfw: add support for TL-WA7510N
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34189
Gabor Juhos [Thu, 18 Oct 2012 07:23:09 +0000 (07:23 +0000)]
firmware-utils: new tool for fixing U-Media firmware headers
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33848
Gabor Juhos [Thu, 18 Oct 2012 07:22:57 +0000 (07:22 +0000)]
tools/firmware-utils: add seama tool
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33840
Jonas Gorski [Mon, 8 Oct 2012 09:59:50 +0000 (09:59 +0000)]
firmware-utils: move bcm_tag.h here
Since there is only one user of bcm_tag.h left, we can safely move it
into the firmware-utils directory, replacing the symlink.
SVN-Revision: 33655
Gabor Juhos [Wed, 22 Aug 2012 20:15:34 +0000 (20:15 +0000)]
tools/firmware-utils: add a new tool for TEW-712BR firmware generation
SVN-Revision: 33233
John Crispin [Wed, 22 Aug 2012 09:22:38 +0000 (09:22 +0000)]
tools/firmware-utils/ptgen option to use MB rounding
SVN-Revision: 33218
Gabor Juhos [Fri, 17 Aug 2012 17:56:02 +0000 (17:56 +0000)]
tools/firmware-utils: add tool for DIR-651-H1 firmware generation
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>
SVN-Revision: 33204
Jo-Philipp Wich [Sun, 12 Aug 2012 12:34:30 +0000 (12:34 +0000)]
use HOST_STATIC_LINKING instead of hardcoding -static
SVN-Revision: 33140
Jo-Philipp Wich [Fri, 10 Aug 2012 19:27:08 +0000 (19:27 +0000)]
firmware-utils: link statically
SVN-Revision: 33117
John Crispin [Tue, 24 Jul 2012 20:38:49 +0000 (20:38 +0000)]
adds mkdapimg
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32822
projects / project / firmware-utils.git / log