Felix Fietkau [Thu, 23 Apr 2015 08:27:22 +0000 (08:27 +0000)]
package-ipkg.mk: fix typo (patch from #19540)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45568
Felix Fietkau [Thu, 23 Apr 2015 08:01:51 +0000 (08:01 +0000)]
hostapd: backport fix for CVE-2015-1863, refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45567
Rafał Miłecki [Wed, 22 Apr 2015 19:07:24 +0000 (19:07 +0000)]
nvram: increase NVRAM size to 64 KiB
For years Broadcom devices use 64 KiB NVRAM partition size and some of
them indeed have it filled in more than 50%. This change allows handling
whole NVRAM e.g. on Netgear WNDR4500 and Netgear R8000.
The same fix was applied to kernel in upstream commit
6ab7c29.
Reported-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45566
Rafał Miłecki [Wed, 22 Apr 2015 19:07:19 +0000 (19:07 +0000)]
nvram: refuse to open NVRAM for writing if it's too big to be handled
Otherwise writing anything will result in loosing data.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45565
Rafał Miłecki [Wed, 22 Apr 2015 19:07:12 +0000 (19:07 +0000)]
nvram: drop check for WGT634U using /proc/diag/model
We don't have broadcom-diag for months or years now and the correct
solution is to simply don't have "nvram" partition on WGT634U anyway.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45564
Rafał Miłecki [Wed, 22 Apr 2015 19:07:06 +0000 (19:07 +0000)]
nvram: use correct variable name for MTD partition size
Sytax of /proc/mtd is following:
dev: size erasesize name
which means that sscanf "mtd%d: %08x" reads size, not erasesize.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45563
Rafał Miłecki [Wed, 22 Apr 2015 19:06:58 +0000 (19:06 +0000)]
nvram: drop support for ancient /dev/mtdblock/%d
Path /dev/mtdblock%d is used for years now.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45562
Nicolas Thill [Wed, 22 Apr 2015 15:36:00 +0000 (15:36 +0000)]
hostapd: mark wpa-supplicant & wpad-mesh as broken on uml
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 45561
Imre Kaloz [Wed, 22 Apr 2015 09:57:32 +0000 (09:57 +0000)]
mwlwifi: upgrade to the latest revision
New revision adds transmit frame rate info
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45560
Imre Kaloz [Wed, 22 Apr 2015 09:35:36 +0000 (09:35 +0000)]
generic/4.0: bump to final version
Linux 4.0 was released on 2014-04-12
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45559
Jonas Gorski [Tue, 21 Apr 2015 17:00:39 +0000 (17:00 +0000)]
brcm63xx: fix leds bcm963269bhr
Fix the led naming and gpios.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45558
Jonas Gorski [Tue, 21 Apr 2015 16:43:46 +0000 (16:43 +0000)]
brcm63xx: add missing bcm96329bhr profile and dts
Hopefully the last missing board.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45557
John Crispin [Tue, 21 Apr 2015 13:18:46 +0000 (13:18 +0000)]
uqmi: auto retry when bringup fails
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45556
John Crispin [Tue, 21 Apr 2015 13:18:40 +0000 (13:18 +0000)]
umbim: auto retry when bringup fails
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45555
John Crispin [Tue, 21 Apr 2015 12:42:42 +0000 (12:42 +0000)]
ralink: the systick clocksource was calculating a bad bogo mips value
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45554
John Crispin [Tue, 21 Apr 2015 12:42:13 +0000 (12:42 +0000)]
Add support for Ubiquiti Rocket M XW devices
This patch adds support for the XW version of the Rocket M series devices
manufactured by Ubiquiti, based on the Atheros AR9342 SoC.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 45553
John Crispin [Tue, 21 Apr 2015 12:42:05 +0000 (12:42 +0000)]
ar71xx: spi cleanup for ap121, db120, ubnt-xm and ap136
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45552
John Crispin [Tue, 21 Apr 2015 12:41:55 +0000 (12:41 +0000)]
ar71xx: merge ap81 patches into one
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45551
Felix Fietkau [Tue, 21 Apr 2015 12:11:07 +0000 (12:11 +0000)]
netifd: update to the latest version, fixes retry when proto handlers exit without changing the state
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45550
Felix Fietkau [Tue, 21 Apr 2015 12:10:44 +0000 (12:10 +0000)]
mt76: remove specific firmware versions from makefile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45549
Felix Fietkau [Tue, 21 Apr 2015 11:24:46 +0000 (11:24 +0000)]
kernel: backport an upstream PPPoE shutdown fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45548
Rafał Miłecki [Tue, 21 Apr 2015 11:21:34 +0000 (11:21 +0000)]
bcm53xx: sysupgrade: check if new kernel fits partition size
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45547
Rafał Miłecki [Tue, 21 Apr 2015 11:04:38 +0000 (11:04 +0000)]
bcm53xx: sysupgrade: improve NAND warnings
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45546
Rafał Miłecki [Tue, 21 Apr 2015 08:42:41 +0000 (08:42 +0000)]
bcm53xx: image: prepare for generating serial flash images
There are some rare devices without NAND, like Netgear EX6200 or
TP-LINK Archer C8.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45545
Rafał Miłecki [Tue, 21 Apr 2015 08:34:25 +0000 (08:34 +0000)]
bcm53xx: sysupgrade: drop some debugging message
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45544
Rafał Miłecki [Tue, 21 Apr 2015 08:32:59 +0000 (08:32 +0000)]
bcm53xx: sysupgrade: allow flashing NAND devices without --force
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45543
Rafał Miłecki [Tue, 21 Apr 2015 08:20:06 +0000 (08:20 +0000)]
bcm53xx: sysupgrade: support flashing TRX with UBI image
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45542
Rafał Miłecki [Tue, 21 Apr 2015 08:20:00 +0000 (08:20 +0000)]
bcm53xx: append only 1 block (with erasing mark) to UBI
This is needed as prepare_generic_squashfs generates more data (in our
case 0x40004 B) and it's complex for sysupgrade to extract UBI image out
of TRX.
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45541
Rafał Miłecki [Tue, 21 Apr 2015 08:19:53 +0000 (08:19 +0000)]
bcm53xx: always use 4 MiB for TRX kernel partition to simplify upgrades
Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45540
Steven Barth [Tue, 21 Apr 2015 07:45:49 +0000 (07:45 +0000)]
odhcpd: minor fixes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45539
John Crispin [Tue, 21 Apr 2015 07:15:55 +0000 (07:15 +0000)]
ar71xx: add TP-LINK TL-WR710N v2
TP-Link TL-WR710n v2 looks like v1, but has less memory (4MB).
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 45538
John Crispin [Tue, 21 Apr 2015 07:15:47 +0000 (07:15 +0000)]
ipq806x: add db149 support to OpenWrt init scripts
DB149 is a IPQ8064 based platform. This patch adds the init scripts to
detect it, configure the network accordingly, and generate a flashable
image for it.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45537
John Crispin [Tue, 21 Apr 2015 07:15:37 +0000 (07:15 +0000)]
ipq806x: add db149 dts files
DB149 is an IPQ806x based development platform. This patch adds the dts
files to support it.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45536
John Crispin [Tue, 21 Apr 2015 07:15:30 +0000 (07:15 +0000)]
ipq806x: enable AT803x driver
Certain IPQ806x based platforms are making use of this PHY. So we'll
enable it so it gets detected as such.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45535
John Crispin [Tue, 21 Apr 2015 06:59:41 +0000 (06:59 +0000)]
kernel: remove module checks for 3.15/3.16/3.17
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45534
John Crispin [Tue, 21 Apr 2015 06:59:35 +0000 (06:59 +0000)]
kernel: remove usb-serial-motorola-phone
replaced by usb-serial-simple (see r45233)
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45533
John Crispin [Tue, 21 Apr 2015 06:59:29 +0000 (06:59 +0000)]
wpan: remove duplicate DEPENDS
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45532
John Crispin [Tue, 21 Apr 2015 06:59:23 +0000 (06:59 +0000)]
kernel: add bluetooth symbols from Kernel 4.0
upstream commit: Bluetooth: Introduce BT_BREDR and BT_LE config options
id:
65efd2bf4885312b42de9829159789199221cc60
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45531
John Crispin [Tue, 21 Apr 2015 06:59:18 +0000 (06:59 +0000)]
kernel: fix generic/3.18 wpan symbols
-removed symbol because it should be handled by wpan.mk
-add missing FAKEHARD symbol (this symbol is removed in Kernel 4.0)
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45530
John Crispin [Tue, 21 Apr 2015 06:59:10 +0000 (06:59 +0000)]
wpan: rework bluetooth / wpan and 6lowpan dependencies
- remove/rename of 6lowpan-iphc
upstream change in 3.17: 6lowpan: introduce new net/6lowpan directory
id:
2c6bed7cfcd3f594ed9e4d6919fa2ebea2243d19
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45529
Luka Perkov [Mon, 20 Apr 2015 20:47:53 +0000 (20:47 +0000)]
ar71xx: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45528
Luka Perkov [Mon, 20 Apr 2015 20:47:48 +0000 (20:47 +0000)]
ar71xx: add support for compex wpj344
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45527
Steven Barth [Mon, 20 Apr 2015 20:47:42 +0000 (20:47 +0000)]
nettle: bump to 3.1
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45526
Felix Fietkau [Mon, 20 Apr 2015 15:01:21 +0000 (15:01 +0000)]
binutils/oprofile: disable mips16 to fix build errors (#19522)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45525
Felix Fietkau [Mon, 20 Apr 2015 15:01:00 +0000 (15:01 +0000)]
ar71xx: Increase RXD/RDV to 2 on OM5P-AN
It was reported that OM5P-AN needs not only a delay setting of 1 for RXD/RDV
but 2. These was found when testing with a NetGear GS752TP POE switch with a
cable length of 50ft and 250ft.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45524
Felix Fietkau [Mon, 20 Apr 2015 15:00:52 +0000 (15:00 +0000)]
ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934x
The ETH_RXDV_DELAY (17:16) and ETH_RXD_DELAY (15:14) are currently not cleared
by the function ath79_setup_ar934x_eth_cfg. Clearing these in the
ath79_setup_ar934x_eth_cfg may cause problems on some hardware because they
rely on the preset value by the bootloader.
Instead another function is introduced which also works on ETH_CFG on AR934x.
It can be used to safely clear and set ETH_RXDV_DELAY and ETH_RXD_DELAY on
machines which require special settings.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45523
Felix Fietkau [Mon, 20 Apr 2015 15:00:41 +0000 (15:00 +0000)]
ar71xx: add mask and shift for RXD/RDV bits in AR934X register file
The commit r38948 ("ag71xx: add F1E specific feature bit definitions to AR934X
register file") introduced definitions for some bits in the RDV/RXD part of the
ETH_CFG register of AR934x. These are incomplete because ETH_RXDV_DELAY is
specified as 17:16 and ETH_RXD_DELAY is specified 15:14. The original commit
only specified the lower bits. The upper bits also have to be unset when the
lower bits should only be set.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45522
Felix Fietkau [Mon, 20 Apr 2015 15:00:20 +0000 (15:00 +0000)]
ar71xx: Remove TX/RX delay from pll_1000 for OM5P-AN
The tx/rx delay bits in the ETH_XMII_CONTROL register have to be unset when the
enable_rgmii_rx_delay/enable_rgmii_tx_delay will be set in the AT803x PHY.
Othwise the throughput in gigabit mode is heavily reduced.
Signed-off-by: Sven Eckelmann <sven@open-mesh.org>
SVN-Revision: 45521
Felix Fietkau [Mon, 20 Apr 2015 15:00:13 +0000 (15:00 +0000)]
mac80211: fallback to wpa_supplicant to setup encrypted mesh
instead of failing when authsae is not installed, also try using
wpa_supplicant as the newly added -mesh variants support mesh mode
and SAE encryption.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45520
Felix Fietkau [Mon, 20 Apr 2015 15:00:07 +0000 (15:00 +0000)]
hostapd/netifd: encrypted mesh with wpa_supplicant
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45519
Jo-Philipp Wich [Mon, 20 Apr 2015 13:58:22 +0000 (13:58 +0000)]
tools: drop unused genext2fs
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45518
Jo-Philipp Wich [Mon, 20 Apr 2015 13:57:43 +0000 (13:57 +0000)]
all: replace genext2fs with make_ext4fs
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45517
Felix Fietkau [Mon, 20 Apr 2015 13:36:25 +0000 (13:36 +0000)]
netfilter.mk: remove obsolete ip_nat_ftp related line
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45516
Felix Fietkau [Mon, 20 Apr 2015 13:36:02 +0000 (13:36 +0000)]
netfilter.mk: move IRC conntrack/nat helpers to kmod-nf-nathelper-extra
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45515
Steven Barth [Mon, 20 Apr 2015 09:17:13 +0000 (09:17 +0000)]
odhcp6c: fix SOL_MAX_RT to match RFC 3315
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45514
Steven Barth [Mon, 20 Apr 2015 06:30:34 +0000 (06:30 +0000)]
nftables: bump version
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45513
Steven Barth [Mon, 20 Apr 2015 06:26:09 +0000 (06:26 +0000)]
iproute2: update to v4.0.0
The most significant change from the previous version is the trimming of
the 300-ip_tiny.patch to lib/utils.c where a section previously patched
had vanished. That section of the patch was removed.
Built and lightly tested on ar71xx against uClibc and musl.
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 45512
Felix Fietkau [Sun, 19 Apr 2015 19:19:12 +0000 (19:19 +0000)]
Revert "ar71xx/image: move TPLINK-LZMA image to new build code" (r45490)
Profile definitions need to be checked and fixed before this patch can
be applied again.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45511
Felix Fietkau [Sun, 19 Apr 2015 18:33:19 +0000 (18:33 +0000)]
libnl-tiny: link library with -Bsymbolic-functions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45510
Felix Fietkau [Sun, 19 Apr 2015 18:33:13 +0000 (18:33 +0000)]
lua: link library with -Bsymbolic-functions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45509
Felix Fietkau [Sun, 19 Apr 2015 18:33:07 +0000 (18:33 +0000)]
cmake.mk: enable -Bsymbolic-functions by default for linking shared libs, slightly improves performance and compression
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45508
Felix Fietkau [Sun, 19 Apr 2015 16:31:54 +0000 (16:31 +0000)]
ramips: switch WSR-1166 and WSR-600 to single-firmware mtd layout
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45507
Jonas Gorski [Sun, 19 Apr 2015 11:38:46 +0000 (11:38 +0000)]
kernel: refresh generic patches
Refresh patches to remove the trailing whitespaces caused by an old
diffutils version on osx.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45506
Jonas Gorski [Sun, 19 Apr 2015 11:38:42 +0000 (11:38 +0000)]
brcm63xx: fix bcm63268 rgmii port rgmii configuration
This should rather be done by passing appropriate platform_data/OF, but
should suffice for now.
Fixes e.g. GbE ports on BCM963268BU_P300.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45505
Jonas Gorski [Sun, 19 Apr 2015 11:38:24 +0000 (11:38 +0000)]
brcm63xx: allow using all four rgmii ports on bcm6316x
At least the third rgmii port is available on 63169, so assume all are
available. Simplifies cpu vs. variant handling.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45504
Felix Fietkau [Sun, 19 Apr 2015 09:50:49 +0000 (09:50 +0000)]
netifd: update to the latest version, fixes more interface device config handling issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45503
Jonas Gorski [Sat, 18 Apr 2015 22:33:50 +0000 (22:33 +0000)]
brcm63xx: BCM963268BU_P300 reference board fixes
- Fix profile name.
- Rremove whitespace on board patch.
- Refresh patches.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45499
Felix Fietkau [Sat, 18 Apr 2015 21:35:22 +0000 (21:35 +0000)]
image.mk: do not emit multiple target definitions for kernel images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45498
Felix Fietkau [Sat, 18 Apr 2015 21:35:16 +0000 (21:35 +0000)]
netifd: update to the latest version, fixes more device config handling issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45497
Felix Fietkau [Sat, 18 Apr 2015 20:14:38 +0000 (20:14 +0000)]
base-files: make the generic sysinfo script run earlier to allow the mount_root script to pick up the board name
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45496
Felix Fietkau [Sat, 18 Apr 2015 19:32:20 +0000 (19:32 +0000)]
image.mk: force rebuild of kernel dependent parts - fixes auto-rebuild on DTS changes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45495
Felix Fietkau [Sat, 18 Apr 2015 17:59:31 +0000 (17:59 +0000)]
iptables: remove obsolete files
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45494
Steven Barth [Sat, 18 Apr 2015 11:25:01 +0000 (11:25 +0000)]
dropbear: update to 2015.67
fixes dbclient login into OpenSSH 6.8p1
error: "Bad hostkey signature"
reported on irc, replicated with Arch Linux
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45493
John Crispin [Sat, 18 Apr 2015 10:19:37 +0000 (10:19 +0000)]
hostapd: Fix wps button hotplug script to handle multiple radios
Hostapd's control file location was changed in 2013, and that has apparently
broken the wps button hotplug script in cases where there are multiple radios
and wps is possibly configured also for the second radio. The current wps
button hotplug script always handles only the first radio.
https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/wps-hotplug.sh
The reason is that the button hotplug script seeks directories like
/var/run/hostapd*, as the hostapd-phy0.conf files were earlier in
per-interface subdirectories.
Currently the *.conf files are directly in /var/run and the control sockets
are in /var/run/hostapd, but there is no subdirectory for each radio.
root@OpenWrt:/# ls /var/run/hostapd*
/var/run/hostapd-phy0.conf /var/run/hostapd-phy1.conf
/var/run/hostapd:
wlan0 wlan1
The hotplug script was attempted to be fixed after the hostapd change by
r38986 in
Dec2013, but that change only unbroke the script for the first
radio, but left it broken for multiple radios.
https://dev.openwrt.org/changeset/38986/
The script fails to find subdirectories with [ -d "$dir" ], and passes just
the only found directory /var/run/hostapd, leading into activating only the
first radio, as hostapd_cli defaults to first socket found inthe passed
directory:
root@OpenWrt:/# hostapd_cli -?
...
usage: hostapd_cli [-p<path>] [-i<ifname>] [-hvB] [-a<path>] \
[-G<ping interval>] [command..]
...
-p<path> path to find control sockets (default: /var/run/hostapd)
...
-i<ifname> Interface to listen on (default: first interface found in the
socket path)
Below is a run with the default script and with my proposed solution.
Default script (with logging added):
==================================
root@OpenWrt:/# cat /etc/rc.button/wps
#!/bin/sh
if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then
for dir in /var/run/hostapd*; do
[ -d "$dir" ] || continue
logger "WPS activated for: $dir"
hostapd_cli -p "$dir" wps_pbc
done
fi
>>>> WPS BUTTON PRESSED <<<<<
root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan0 wps_get_status
PBC Status: Active
Last WPS result: None
root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan1 wps_get_status
PBC Status: Timed-out
Last WPS result: None
root@OpenWrt:/# logread | grep WPS
Tue Apr 14 18:38:50 2015 user.notice root: WPS activated for: /var/run/hostapd
wlan0 got WPS activated, while wlan1 remained inactive.
I have modified the script to search for sockets instead of directories and
to use the "-i" option with hostapd_cli, and now the script properly
activates wps for both radios. As "-i" needs the interface name instead of
the full path, the script first changes dir to /var/run/hostapd to get simply
the interface names.
Modified script (with logging):
===============================
root@OpenWrt:/# cat /etc/rc.button/wps
#!/bin/sh
if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then
cd /var/run/hostapd
for dir in *; do
[ -S "$socket" ] || continue
logger "WPS activated for: $socket"
hostapd_cli -i "$socket" wps_pbc
done
fi
>>>> WPS BUTTON PRESSED <<<<<
root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan0 wps_get_status
PBC Status: Active
Last WPS result: None
root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan1 wps_get_status
PBC Status: Active
Last WPS result: None
root@OpenWrt:/# logread | grep WPS
Tue Apr 14 18:53:06 2015 user.notice root: WPS activated for: wlan0
Tue Apr 14 18:53:06 2015 user.notice root: WPS activated for: wlan1
Both radios got their WPS activated properly.
I am not sure if my solution is optimal, but it seems to work. WPS button is
maybe not that often used functionality, but it might be fixed in any case.
Routers with multiple radios are common now, so the bug is maybe more
prominent than earlier.
The modified script has been in a slightly different format in my community
build since r42420 in September 2014.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45492
John Crispin [Sat, 18 Apr 2015 10:19:28 +0000 (10:19 +0000)]
ar71xx/image: remove duplicated rootfs in new tplink initramfs images
The new building code included the rootfs twice when building tplink initramfs images.
To make it more readable move initramfs into an own build step
Build/mktplinkfw-initramfs.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45491
John Crispin [Sat, 18 Apr 2015 10:19:23 +0000 (10:19 +0000)]
ar71xx/image: move TPLINK-LZMA image to new build code
There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45490
John Crispin [Sat, 18 Apr 2015 10:19:14 +0000 (10:19 +0000)]
ar71xx/image: add template tplink-16mlzma
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45489
John Crispin [Sat, 18 Apr 2015 10:19:09 +0000 (10:19 +0000)]
ar71xx/image: fix imagesize of template tplink-8mlzma
The new image size is verified by a running tplink device and checked
against mktplinkfw source code.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45488
John Crispin [Sat, 18 Apr 2015 10:19:02 +0000 (10:19 +0000)]
Removed reference to imaginary procd_add_interface_reload in procd.sh
The last line of procd.sh has a reference to procd_add_interface_reload. procd_add_interface_reload
doesn't seem to exist. I've removed the reference of it to minimize confusion.
Signed-off-by: Eric Schultz <eschultz@prplfoundation.org>
SVN-Revision: 45487
Jonas Gorski [Sat, 18 Apr 2015 09:34:17 +0000 (09:34 +0000)]
brcm63xx: fix bcm96318ref_p300 profile name
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45486
Felix Fietkau [Fri, 17 Apr 2015 19:28:10 +0000 (19:28 +0000)]
netifd: update to the latest version, fixes issues in handling device config from interfaces
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45483
Felix Fietkau [Fri, 17 Apr 2015 18:52:28 +0000 (18:52 +0000)]
qos-scripts: drop obsolete depdendency on iptabes-mod-filter (#19506)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45482
Felix Fietkau [Fri, 17 Apr 2015 18:52:24 +0000 (18:52 +0000)]
iptables: remove layer7 leftovers (#19506)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45481
Felix Fietkau [Fri, 17 Apr 2015 18:52:15 +0000 (18:52 +0000)]
bcm53xx: add profiling support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45480
Steven Barth [Fri, 17 Apr 2015 14:47:12 +0000 (14:47 +0000)]
network: also shorten virtual interface names of ppp and 3g/4g connections
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45479
Luka Perkov [Fri, 17 Apr 2015 13:47:13 +0000 (13:47 +0000)]
imx6: put uboot-envtools in DEFAULT_PACKAGES
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45478
Luka Perkov [Fri, 17 Apr 2015 13:47:09 +0000 (13:47 +0000)]
kirkwood: put uboot-envtools in DEFAULT_PACKAGES
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45477
Steven Barth [Fri, 17 Apr 2015 13:10:19 +0000 (13:10 +0000)]
network: shorten names of generated interfaces
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45476
Felix Fietkau [Fri, 17 Apr 2015 11:56:28 +0000 (11:56 +0000)]
kernel: mark kmod-usb-bcma/ssb as hidden, they are only selected from ohci/ehci
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45475
Rafał Miłecki [Fri, 17 Apr 2015 08:12:00 +0000 (08:12 +0000)]
brcm47xx: add buttons support for WRT310N v2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45474
Rafał Miłecki [Fri, 17 Apr 2015 06:03:00 +0000 (06:03 +0000)]
bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45473
Rafał Miłecki [Fri, 17 Apr 2015 05:45:46 +0000 (05:45 +0000)]
brcm47xx: fix handling absolute paths in sysupgrade (for vendor formats)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45472
Felix Fietkau [Fri, 17 Apr 2015 00:01:29 +0000 (00:01 +0000)]
busybox: fix an ash regression in handling local variables
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45471
Rafał Miłecki [Thu, 16 Apr 2015 21:43:27 +0000 (21:43 +0000)]
brcm47xx: rework vendor fw handling to don't duplicate upgrade calls
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45470
Rafał Miłecki [Thu, 16 Apr 2015 21:20:37 +0000 (21:20 +0000)]
brcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k
The mips74k subtarget of brcm47xx configures gcc to compile for mips32r2;
however, the generated kernel config for 3.14 and later kernels ends up
with CPU_MIPS32_R1 and CPU_MIPSR1 selected. The generated kernel config
for the 3.10 kernel (Barrier Breaker) properly selected CPU_MIPS32_R2 and
CPU_MIPSR2. Modify the default kernel config for mips74k to explicitly
select CPU_MIPS32_R2 and CPU_MIPSR2.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45469
Felix Fietkau [Thu, 16 Apr 2015 20:43:11 +0000 (20:43 +0000)]
kernel: accidentally committed a few patches in the wrong place, move them
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45468
Felix Fietkau [Thu, 16 Apr 2015 20:09:55 +0000 (20:09 +0000)]
bcm53xx: add power button for WXR-1900DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45467
Felix Fietkau [Thu, 16 Apr 2015 20:09:48 +0000 (20:09 +0000)]
bcm53xx: add power button for Buffalo WZR-1750DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45466
Felix Fietkau [Thu, 16 Apr 2015 20:09:42 +0000 (20:09 +0000)]
bcm53xx: add USB LED for Buffalo WZR-1750DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45465
Felix Fietkau [Thu, 16 Apr 2015 20:09:36 +0000 (20:09 +0000)]
bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45464
projects / openwrt / staging / dangole.git / log