Ville Syrjälä [Thu, 11 Apr 2019 14:33:49 +0000 (17:33 +0300)]
drm/i915: Suppress spurious combo PHY B warning
On ICL the DMC doesn't reinit combo PHY B so we should not warn
about its state being bogus during the display core uninit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411143349.17934-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Ville Syrjälä [Thu, 11 Apr 2019 16:49:25 +0000 (19:49 +0300)]
drm/i915: Restore correct bxt_ddi_phy_calc_lane_lat_optim_mask() calculation
We are no longer calling bxt_ddi_phy_calc_lane_lat_optim_mask() when
intel{hdmi,dp}_compute_config() succeeds, and instead only call it
when those fail. This is fallout from the bool->int
.compute_config() conversion which failed to invert the return
value check before calling bxt_ddi_phy_calc_lane_lat_optim_mask().
Let's just replace it with an early bailout so that it's harder
to miss.
This restores the correct latency optim setting calculation
(which could fix some real failures), and avoids the
MISSING_CASE() from bxt_ddi_phy_calc_lane_lat_optim_mask()
after intel{hdmi,dp}_compute_config() has failed.
Cc: Lyude Paul <lyude@redhat.com>
Fixes: 204474a6b859 ("drm/i915: Pass down rc in intel_encoder->compute_config()")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109373
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411164925.28491-1-ville.syrjala@linux.intel.com
Reviewed-by: Lyude Paul <lyude@redhat.com>
Chris Wilson [Fri, 12 Apr 2019 11:01:59 +0000 (12:01 +0100)]
drm/i915: Flush the CSB pointer reset
The HW resets it CSB tail pointer on resetting the engine. Most of the
time. In case it doesn't (and for system resume) we write the expected
value anyway. For extra paranoia, flush the write before we invalidate
the cacheline.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412110159.10495-1-chris@chris-wilson.co.uk
Radhakrishna Sripada [Sat, 30 Mar 2019 01:19:20 +0000 (18:19 -0700)]
drm/i915: Fix the inconsistent RMW in WA 827
RMW is used only in the disable path. Using it in enable path
for consistency.
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190330011921.10397-2-radhakrishna.sripada@intel.com
Radhakrishna Sripada [Sat, 30 Mar 2019 01:19:19 +0000 (18:19 -0700)]
drm/i915: Rename skl_wa_clkgating to the actual WA
No functional change. Renaming the function to reflect the specific WA.
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190330011921.10397-1-radhakrishna.sripada@intel.com
Ville Syrjälä [Tue, 26 Mar 2019 14:49:02 +0000 (16:49 +0200)]
drm/i915: Do not enable FEC without DSC
Currently we enable FEC even when DSC is no used. While that is
theoretically valid supposedly there isn't much of a benefit from
this. But more importantly we do not account for the FEC link
bandwidth overhead (2.4%) in the non-DSC link bandwidth computations.
So the code may think we have enough bandwidth when we in fact
do not.
Cc: stable@vger.kernel.org
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: 240999cf339f ("i915/dp/fec: Add fec_enable to the crtc state.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326144903.6617-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Chris Wilson [Tue, 9 Apr 2019 17:41:08 +0000 (18:41 +0100)]
drm/i915: Avoid reclaim taints from runtime-pm debug
As intel_runtime_pm_get/_put may be called from any blockable context,
we need to avoid allowing reclaim from our mallocs, as we need to
avoid tainting any mutexes held by the callers (as they may themselves
not allow for allocations as they are taken in the shrinker).
<4> [435.339331] WARNING: possible circular locking dependency detected
<4> [435.339364] 5.1.0-rc4-CI-Trybot_4116+ #1 Tainted: G U
<4> [435.339395] ------------------------------------------------------
<4> [435.339426] gem_caching/1334 is trying to acquire lock:
<4> [435.339456]
000000004505c39b (wakeref#3){+.+.}, at: intel_engine_pm_put+0x1b/0x40 [i915]
<4> [435.339788]
but task is already holding lock:
<4> [435.339819]
00000000ee77b4ed (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part.24+0x0/0x30
<4> [435.339879]
which lock already depends on the new lock.
<4> [435.339918]
the existing dependency chain (in reverse order) is:
<4> [435.339952]
-> #1 (fs_reclaim){+.+.}:
<4> [435.339998] fs_reclaim_acquire.part.24+0x24/0x30
<4> [435.340035] kmem_cache_alloc_trace+0x2a/0x290
<4> [435.340311] __print_intel_runtime_pm_wakeref+0x24/0x160 [i915]
<4> [435.340590] untrack_intel_runtime_pm_wakeref+0x16e/0x1d0 [i915]
<4> [435.340869] intel_runtime_pm_put_unchecked+0xd/0x30 [i915]
<4> [435.341147] __intel_wakeref_put_once+0x22/0x40 [i915]
<4> [435.341508] i915_request_retire+0x477/0xaf0 [i915]
<4> [435.341871] ring_retire_requests+0x86/0x160 [i915]
<4> [435.342226] i915_retire_requests+0x58/0xc0 [i915]
<4> [435.342576] retire_work_handler+0x5b/0x70 [i915]
<4> [435.342615] process_one_work+0x245/0x610
<4> [435.342646] worker_thread+0x37/0x380
<4> [435.342679] kthread+0x119/0x130
<4> [435.342714] ret_from_fork+0x3a/0x50
<4> [435.342739]
-> #0 (wakeref#3){+.+.}:
<4> [435.342788] lock_acquire+0xa6/0x1c0
<4> [435.342822] __mutex_lock+0x8c/0x960
<4> [435.342853] atomic_dec_and_mutex_lock+0x33/0x50
<4> [435.343151] intel_engine_pm_put+0x1b/0x40 [i915]
<4> [435.343501] i915_request_retire+0x477/0xaf0 [i915]
<4> [435.343851] ring_retire_requests+0x86/0x160 [i915]
<4> [435.344202] i915_retire_requests+0x58/0xc0 [i915]
<4> [435.344543] i915_gem_shrink+0xd8/0x5b0 [i915]
<4> [435.344835] i915_drop_caches_set+0x17b/0x250 [i915]
<4> [435.344877] simple_attr_write+0xb0/0xd0
<4> [435.344911] full_proxy_write+0x51/0x80
<4> [435.344943] vfs_write+0xbd/0x1b0
<4> [435.344972] ksys_write+0x55/0xe0
<4> [435.345002] do_syscall_64+0x55/0x190
<4> [435.345040] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409174108.19396-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 11 Apr 2019 13:05:15 +0000 (14:05 +0100)]
drm/i915/execlists: Always reset the context's RING registers
During reset, we try and stop the active ring. This has the consequence
that we often clobber the RING registers within the context image. When
we find an active request, we update the context image to rerun that
request (if it was guilty, we replace the hanging user payload with
NOPs). However, we were ignoring an active context if the request had
completed, with the consequence that the next submission on that request
would start with RING_HEAD==0 and not the tail of the previous request,
causing all requests still in the ring to be rerun. Rare, but
occasionally seen within CI where we would spot that the context seqno
would reverse and complain that we were retiring an incomplete request.
<0> [412.390350] <idle>-0 3d.s2 408373352us : __i915_request_submit: rcs0 fence 1e95b:3640 -> current 3638
<0> [412.390350] <idle>-0 3d.s2 408373353us : __i915_request_submit: rcs0 fence 1e95b:3642 -> current 3638
<0> [412.390350] <idle>-0 3d.s2 408373354us : __i915_request_submit: rcs0 fence 1e95b:3644 -> current 3638
<0> [412.390350] <idle>-0 3d.s2 408373354us : __i915_request_submit: rcs0 fence 1e95b:3646 -> current 3638
<0> [412.390350] <idle>-0 3d.s2 408373356us : __execlists_submission_tasklet: rcs0 in[0]: ctx=2.1, fence 1e95b:3646 (current 3638), prio=4
<0> [412.390350] i915_sel-4613 0.... 408373374us : __i915_request_commit: rcs0 fence 1e95b:3648
<0> [412.390350] i915_sel-4613 0d..1 408373377us : process_csb: rcs0 cs-irq head=2, tail=3
<0> [412.390350] i915_sel-4613 0d..1 408373377us : process_csb: rcs0 csb[3]: status=0x00000001:0x00000000, active=0x1
<0> [412.390350] i915_sel-4613 0d..1 408373378us : __i915_request_submit: rcs0 fence 1e95b:3648 -> current 3638
<0> [412.390350] <idle>-0 3..s1 408373378us : execlists_submission_tasklet: rcs0 awake?=1, active=5
<0> [412.390350] i915_sel-4613 0d..1 408373379us : __execlists_submission_tasklet: rcs0 in[0]: ctx=2.2, fence 1e95b:3648 (current 3638), prio=4
<0> [412.390350] i915_sel-4613 0.... 408373381us : i915_reset_engine: rcs0 flags=4
<0> [412.390350] i915_sel-4613 0.... 408373382us : execlists_reset_prepare: rcs0: depth<-0
<0> [412.390350] <idle>-0 3d.s2 408373390us : process_csb: rcs0 cs-irq head=3, tail=4
<0> [412.390350] <idle>-0 3d.s2 408373390us : process_csb: rcs0 csb[4]: status=0x00008002:0x00000002, active=0x1
<0> [412.390350] <idle>-0 3d.s2 408373390us : process_csb: rcs0 out[0]: ctx=2.2, fence 1e95b:3648 (current 3640), prio=4
<0> [412.390350] i915_sel-4613 0.... 408373401us : intel_engine_stop_cs: rcs0
<0> [412.390350] i915_sel-4613 0d..1 408373402us : process_csb: rcs0 cs-irq head=4, tail=4
<0> [412.390350] i915_sel-4613 0.... 408373403us : intel_gpu_reset: engine_mask=1
<0> [412.390350] i915_sel-4613 0d..1 408373408us : execlists_cancel_port_requests: rcs0:port0 fence 1e95b:3648, (current 3648)
<0> [412.390350] i915_sel-4613 0.... 408373442us : intel_engine_cancel_stop_cs: rcs0
<0> [412.390350] i915_sel-4613 0.... 408373442us : execlists_reset_finish: rcs0: depth->0
<0> [412.390350] ksoftirq-26 3..s. 408373442us : execlists_submission_tasklet: rcs0 awake?=1, active=0
<0> [412.390350] ksoftirq-26 3d.s1 408373443us : process_csb: rcs0 cs-irq head=5, tail=5
<0> [412.390350] i915_sel-4613 0.... 408373475us : i915_request_retire: rcs0 fence 1e95b:3640, current 3648
<0> [412.390350] i915_sel-4613 0.... 408373476us : i915_request_retire: __retire_engine_request(rcs0) fence 1e95b:3640, current 3648
<0> [412.390350] i915_sel-4613 0.... 408373494us : __i915_request_commit: rcs0 fence 1e95b:3650
<0> [412.390350] i915_sel-4613 0d..1 408373496us : process_csb: rcs0 cs-irq head=5, tail=5
<0> [412.390350] i915_sel-4613 0d..1 408373496us : __i915_request_submit: rcs0 fence 1e95b:3650 -> current 3648
<0> [412.390350] i915_sel-4613 0d..1 408373498us : __execlists_submission_tasklet: rcs0 in[0]: ctx=2.1, fence 1e95b:3650 (current 3648), prio=6
<0> [412.390350] i915_sel-4613 0.... 408373500us : i915_request_retire_upto: rcs0 fence 1e95b:3648, current 3648
<0> [412.390350] i915_sel-4613 0.... 408373500us : i915_request_retire: rcs0 fence 1e95b:3642, current 3648
<0> [412.390350] i915_sel-4613 0.... 408373501us : i915_request_retire: __retire_engine_request(rcs0) fence 1e95b:3642, current 3648
<0> [412.390350] i915_sel-4613 0.... 408373514us : i915_request_retire: rcs0 fence 1e95b:3644, current 3648
<0> [412.390350] i915_sel-4613 0.... 408373515us : i915_request_retire: __retire_engine_request(rcs0) fence 1e95b:3644, current 3648
<0> [412.390350] i915_sel-4613 0.... 408373527us : i915_request_retire: rcs0 fence 1e95b:3646, current 3640
<0> [412.390350] <idle>-0 3..s1 408373569us : execlists_submission_tasklet: rcs0 awake?=1, active=1
<0> [412.390350] <idle>-0 3d.s2 408373569us : process_csb: rcs0 cs-irq head=5, tail=1
<0> [412.390350] <idle>-0 3d.s2 408373570us : process_csb: rcs0 csb[0]: status=0x00000001:0x00000000, active=0x1
<0> [412.390350] <idle>-0 3d.s2 408373570us : process_csb: rcs0 csb[1]: status=0x00000018:0x00000002, active=0x5
<0> [412.390350] <idle>-0 3d.s2 408373570us : process_csb: rcs0 out[0]: ctx=2.1, fence 1e95b:3650 (current 3650), prio=6
<0> [412.390350] <idle>-0 3d.s2 408373571us : process_csb: rcs0 completed ctx=2
<0> [412.390350] i915_sel-4613 0.... 408373621us : i915_request_retire: i915_request_retire:253 GEM_BUG_ON(!i915_request_completed(request))
v2: Fixup the cancellation path to drain the CSB and reset the pointers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411130515.20716-2-chris@chris-wilson.co.uk
Chris Wilson [Thu, 11 Apr 2019 13:05:14 +0000 (14:05 +0100)]
drm/i915/guc: Implement reset locally
Before causing guc and execlists to diverge further (breaking guc in the
process), take a copy of the current reset procedure and make it local to
the guc submission backend
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411130515.20716-1-chris@chris-wilson.co.uk
Mika Kuoppala [Thu, 11 Apr 2019 08:30:34 +0000 (11:30 +0300)]
drm/i915: Disable read only ppgtt support for gen11
On gen11 writing to read only ppgtt page causes a gpu hang.
This behaviour is different than with previous gen where
read only ppgtt access is supported. On those, the write
is just dropped without visible side effects.
Disable ro ppgtt support on gen11 until a solution can
be found to bring it into line with its predecessors.
References: HSDES#
1807136187
References: https://bugzilla.freedesktop.org/show_bug.cgi?id=108569
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411083034.28311-1-mika.kuoppala@linux.intel.com
Chris Wilson [Thu, 11 Apr 2019 12:24:45 +0000 (13:24 +0100)]
drm/i915: Call i915_sw_fence_fini on request cleanup
As i915_requests are put into an RCU-freelist, they may get reused
before debugobjects notice them as being freed. On cleanup, explicitly
call i915_sw_fence_fini() so that the debugobject is properly tracked.
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: b7404c7ecb38 ("drm/i915: Bump ready tasks ahead of busywaits")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190411122445.20060-1-chris@chris-wilson.co.uk
Ville Syrjälä [Tue, 26 Mar 2019 14:49:03 +0000 (16:49 +0200)]
drm/i915: Clean up DSC vs. not bpp handling
No point in duplicating all this code when we can just
use a variable to hold the output bpp (the only thing
that differs between the two branches).
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.comk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326144903.6617-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Ville Syrjälä [Tue, 26 Mar 2019 14:25:56 +0000 (16:25 +0200)]
drm/i915: Set DP min_bpp to 8*3 for non-RGB output formats
6bpc is only legal for RGB and RAW pixel encodings. For the rest
the minimum is 8bpc. Set our lower limit accordingly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326142556.21176-6-ville.syrjala@linux.intel.com
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Mika Kuoppala [Fri, 5 Apr 2019 20:46:57 +0000 (21:46 +0100)]
drm/i915/icl: Switch to using 12 deep CSB status FIFO
Now when we can support variable csb fifo sizes, disable legacy mode.
By disabling legacy we hope to get better hw testing coverage by
assuming everyone else have switched over.
v2: rebase
References: https://bugs.freedesktop.org/show_bug.cgi?id=110338
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Kelvin Gardiner <kelvin.gardiner@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405204657.12887-2-chris@chris-wilson.co.uk
Mika Kuoppala [Fri, 5 Apr 2019 20:46:56 +0000 (21:46 +0100)]
drm/i915: Prepare for larger CSB status FIFO size
Make csb entry count variable in preparation for larger
CSB status FIFO size found on gen11+ hardware.
v2: adapt to hwsp access only (Chris)
non continuous mmio (Daniele)
v3: entries (Chris), fix macro for checkpatch
v4: num_entries (Chris)
v5: consistency on num_entries
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405204657.12887-1-chris@chris-wilson.co.uk
Mika Kuoppala [Wed, 10 Apr 2019 10:59:22 +0000 (13:59 +0300)]
drm/i915: Use Engine1 instance for gen11 pm interrupts
With gen11 the interrupt registers are shared between 2 engines,
with Engine1 instance being upper word and Engine0 instance being
lower. Annoyingly gen11 selected the pm interrupts to be in the
Engine1 instance.
Rectify the situation by shifting the access accordingly,
based on gen.
v2: comments, warn on overzealous rps_events
Bugzilla: https://bugzilla.freedesktop.org/show_bug.cgi?id=108059
Testcase: igt/i915_pm_rps@min-max-config-loaded
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410105923.18546-6-mika.kuoppala@linux.intel.com
Mika Kuoppala [Wed, 10 Apr 2019 13:24:36 +0000 (16:24 +0300)]
drm/i915/icl: Disable video turbo mode for rp control
There is no video turbo mode for gen11, so don't set it.
v2: inline (Chris)
v3: brackets (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410132436.23679-1-mika.kuoppala@linux.intel.com
Mika Kuoppala [Wed, 10 Apr 2019 10:59:19 +0000 (13:59 +0300)]
drm/i915/icl: Enable media sampler powergate
Enable media sampler powergate as recommended.
v2: use REG_BIT (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410105923.18546-3-mika.kuoppala@linux.intel.com
Mika Kuoppala [Wed, 10 Apr 2019 10:59:18 +0000 (13:59 +0300)]
drm/i915/icl: Apply a recommended rc6 threshold
On gen11 the recommended rc6 threshold differs from previous
gens, apply it. Move the write to a correct spot in sequence.
v2: do write in 2b, fix bspec ref (Michal)
Bspec: 33149
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410105923.18546-2-mika.kuoppala@linux.intel.com
Mika Kuoppala [Wed, 10 Apr 2019 10:59:17 +0000 (13:59 +0300)]
drm/i915: Use dedicated rc6 enabling sequence for gen11
In order not to inflate gen9 rc6 enabling sequence with
gen11 specifics, use a separate function for it.
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410105923.18546-1-mika.kuoppala@linux.intel.com
Chris Wilson [Tue, 9 Apr 2019 15:29:22 +0000 (16:29 +0100)]
drm/i915: Bump ready tasks ahead of busywaits
Consider two tasks that are running in parallel on a pair of engines
(vcs0, vcs1), but then must complete on a shared engine (rcs0). To
maximise throughput, we want to run the first ready task on rcs0 (i.e.
the first task that completes on either of vcs0 or vcs1). When using
semaphores, however, we will instead queue onto rcs in submission order.
To resolve this incorrect ordering, we want to re-evaluate the priority
queue when each of the request is ready. Normally this happens because
we only insert into the priority queue requests that are ready, but with
semaphores we are inserting ahead of their readiness and to compensate
we penalize those tasks with reduced priority (so that tasks that do not
need to busywait should naturally be run first). However, given a series
of tasks that each use semaphores, the queue degrades into submission
fifo rather than readiness fifo, and so to counter this we give a small
boost to semaphore users as their dependent tasks are completed (and so
we no longer require any busywait prior to running the user task as they
are then ready themselves).
v2: Fixup irqsave for schedule_lock (Tvrtko)
Testcase: igt/gem_exec_schedule/semaphore-codependency
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409152922.23894-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 10 Apr 2019 19:01:20 +0000 (20:01 +0100)]
drm/i915: Only reset the pinned kernel contexts on resume
On resume, we know that the only pinned contexts in danger of seeing
corruption are the kernel context, and so we do not need to walk the
list of all GEM contexts as we tracked them on each engine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410190120.830-1-chris@chris-wilson.co.uk
Manasi Navare [Fri, 5 Apr 2019 22:48:21 +0000 (15:48 -0700)]
drm/i915/dp: Expose force_dsc_enable through debugfs
Currently we use force_dsc_enable to force DSC from IGT, but
we dont expose this value to userspace through debugfs.
This patch exposes this through the same dsc_fec_support
debugfs node per connector so that we can restore its value
back after the tests are completed.
Suggested-by: Imre Deak <imre.deak@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405224821.32435-1-manasi.d.navare@intel.com
Mika Kuoppala [Wed, 10 Apr 2019 13:21:24 +0000 (16:21 +0300)]
drm/i915/icl: Don't warn on spurious interrupts
There is a chance we can see spurious interrupts in live
now. We have more engines enabled and that with more elaborate
access patterns with pm and display, increases the chances
hardware just makes a social call, without anything to work on.
Remove the error as we have tests to actually probe if
we really miss interrupt, instead of getting spurious ones.
Note that now we do write to intr_dw even with a zero
value. This is considered advantegous as the write
is an ack that sw is done.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410132124.21795-2-mika.kuoppala@linux.intel.com
Mika Kuoppala [Wed, 10 Apr 2019 13:21:23 +0000 (16:21 +0300)]
drm/i915/icl: Handle rps interrupts without irq lock
Unlike previous gens, we already hold the irq_lock on
entering the rps handler so we can't use it as it is.
Make a gen11 specific rps interrupt handler without
locking.
v2: return early (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410132124.21795-1-mika.kuoppala@linux.intel.com
Takashi Iwai [Wed, 10 Apr 2019 11:03:22 +0000 (13:03 +0200)]
ALSA: hda: Fix racy display power access
snd_hdac_display_power() doesn't handle the concurrent calls carefully
enough, and it may lead to the doubly get_power or put_power calls,
when a runtime PM and an async work get called in racy way.
This patch addresses it by reusing the bus->lock mutex that has been
used for protecting the link state change in ext bus code, so that it
can protect against racy display state changes. The initialization of
bus->lock was moved from snd_hdac_ext_bus_init() to
snd_hdac_bus_init() as well accordingly.
Testcase: igt/i915_pm_rpm/module-reload #glk-dsi
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/s5h8swiunph.wl-tiwai@suse.de
Jani Nikula [Fri, 5 Apr 2019 07:52:20 +0000 (10:52 +0300)]
drm/i915/dp: revert back to max link rate and lane count on eDP
Commit
7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config fast
and narrow") started to optize the eDP 1.4+ link config, both per spec
and as preparation for display stream compression support.
Sadly, we again face panels that flat out fail with parameters they
claim to support. Revert, and go back to the drawing board.
v2: Actually revert to max params instead of just wide-and-slow.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109959
Fixes: 7769db588384 ("drm/i915/dp: optimize eDP 1.4+ link config fast and narrow")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.0+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Albert Astals Cid <aacid@kde.org> # v5.0 backport
Tested-by: Emanuele Panigati <ilpanich@gmail.com> # v5.0 backport
Tested-by: Matteo Iervasi <matteoiervasi@gmail.com> # v5.0 backport
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405075220.9815-1-jani.nikula@intel.com
Vandita Kulkarni [Mon, 25 Mar 2019 11:26:42 +0000 (16:56 +0530)]
drm/i915/icl: Fix port disable sequence for mipi-dsi
Re-enable clock gating of DDI clocks.
v2: Fix the default ddi clk state for mipi-dsi (Imre)
Fixes: 1026bea00381 ("drm/i915/icl: Ungate DSI clocks")
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553513202-13863-2-git-send-email-vandita.kulkarni@intel.com
Vandita Kulkarni [Mon, 25 Mar 2019 11:26:41 +0000 (16:56 +0530)]
drm/i915/icl: Ungate ddi clocks before IO enable
IO enable sequencing needs ddi clocks enabled.
These clocks will be gated at a later point in
the enable sequence.
v2: Fix the commit header (Uma)
v3: Remove the redundant read (Ville)
Fixes: 949fc52af19e ("drm/i915/icl: add pll mapping for DSI")
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553513202-13863-1-git-send-email-vandita.kulkarni@intel.com
Chris Wilson [Mon, 8 Apr 2019 09:17:14 +0000 (10:17 +0100)]
drm/i915/guc: Replace preempt_client lookup with engine->preempt_context
Circumvent the dance we currently perform to find the preempt_client and
lookup its HW context for this engine, as we know we have already pinned
the preempt_context on the engine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190408091728.20207-15-chris@chris-wilson.co.uk
Chris Wilson [Sun, 7 Apr 2019 19:26:49 +0000 (20:26 +0100)]
drm/i915/selftests: Mark live_forcewake_ops as unreliable
A couple of machines in the farm show quite frequent errors in the
powerwells not being released. Either there is an external agent
interferring with the powerwells, or the powerwell doesn't quite behave
as we anticipate -- either way, the test is not reliable enough to be
enabled by default in CI. It has served its immediate purpose in
providing coverage as we made tweaks to forcewake, so keep it available
for future testing.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110210
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190407192649.14750-1-chris@chris-wilson.co.uk
José Roberto de Souza [Sat, 6 Apr 2019 00:51:12 +0000 (17:51 -0700)]
drm/i915/psr: Do not enable PSR in interlaced mode for all GENs
This interlaced mode restriction applies to all gens, not only to
Haswell.
Also while at it updating the debug message to.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190406005112.27205-4-jose.souza@intel.com
José Roberto de Souza [Sat, 6 Apr 2019 00:51:11 +0000 (17:51 -0700)]
drm/i915/psr: Initialize PSR mutex even when sink is not reliable
Even when driver is reloaded and hits this scenario the PSR mutex
should be initialized, otherwise reading PSR debugfs status will
execute mutex_lock() over a mutex that was not initialized.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190406005112.27205-3-jose.souza@intel.com
José Roberto de Souza [Sat, 6 Apr 2019 00:51:10 +0000 (17:51 -0700)]
drm/i915: Remove unused VLV/CHV PSR registers
PSR support for VLV and CHV was dropped in commit
ce3508fd2a77
("drm/i915/psr: Nuke PSR support for VLV and CHV") so no need to keep
this registers around.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190406005112.27205-2-jose.souza@intel.com
José Roberto de Souza [Sat, 6 Apr 2019 00:51:09 +0000 (17:51 -0700)]
drm/i915/psr: Update PSR2 SU corruption workaround comment
Turn out it is not a DMC bug it is actually a HW one, so this
workaround will be needed for current gens, lets update the comment
and remove the FIXME.
BSpec: 7723
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190406005112.27205-1-jose.souza@intel.com
Chris Wilson [Mon, 8 Apr 2019 09:17:03 +0000 (10:17 +0100)]
drm/i915: Consolidate the timeline->barrier
The timeline is strictly ordered, so by inserting the timeline->barrier
request into the timeline->last_request it naturally provides the same
barrier. Consolidate the pair of barriers into one as they serve the
same purpose.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190408091728.20207-4-chris@chris-wilson.co.uk
Chris Wilson [Mon, 8 Apr 2019 09:17:02 +0000 (10:17 +0100)]
drm/i915: Use static allocation for i915_globals_park()
In order to avoid the malloc inside i915_globals_park() occurring
underneath a lock connected to the shrinker (thus causing circular
lockdeps warnings), move the rcu_worker to a global.
<4> [39.085073] ======================================================
<4> [39.085273] WARNING: possible circular locking dependency detected
<4> [39.085552] 5.1.0-rc3-CI-Trybot_4088+ #1 Tainted: G U
<4> [39.085752] ------------------------------------------------------
<4> [39.085949] kswapd0/32 is trying to acquire lock:
<4> [39.086121]
00000000004b5f91 (wakeref#3){+.+.}, at: intel_engine_pm_put+0x1b/0x40 [i915]
<4> [39.086493]
but task is already holding lock:
<4> [39.086682]
00000000dd009a9a (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x0/0x30
<4> [39.086910]
which lock already depends on the new lock.
<4> [39.087139]
the existing dependency chain (in reverse order) is:
<4> [39.087356]
-> #2 (fs_reclaim){+.+.}:
<4> [39.087604] fs_reclaim_acquire.part.24+0x24/0x30
<4> [39.087785] kmem_cache_alloc_trace+0x2a/0x290
<4> [39.087998] i915_globals_park+0x22/0xa0 [i915]
<4> [39.088478] idle_work_handler+0x1df/0x220 [i915]
<4> [39.089016] process_one_work+0x245/0x610
<4> [39.089447] worker_thread+0x37/0x380
<4> [39.089956] kthread+0x119/0x130
<4> [39.090374] ret_from_fork+0x3a/0x50
<4> [39.090868]
-> #1 (wakeref#4){+.+.}:
<4> [39.091569] __mutex_lock+0x8c/0x960
<4> [39.092054] atomic_dec_and_mutex_lock+0x33/0x50
<4> [39.092521] intel_gt_pm_put+0x1b/0x40 [i915]
<4> [39.093047] intel_engine_park+0xeb/0x1d0 [i915]
<4> [39.093514] __intel_wakeref_put_once+0x10/0x30 [i915]
<4> [39.094062] i915_request_retire+0x477/0xaf0 [i915]
<4> [39.094547] ring_retire_requests+0x86/0x160 [i915]
<4> [39.095110] i915_retire_requests+0x58/0xc0 [i915]
<4> [39.095587] i915_gem_wait_for_idle.part.22+0xb2/0xf0 [i915]
<4> [39.096142] switch_to_kernel_context_sync+0x2a/0x70 [i915]
<4> [39.096633] i915_gem_init+0x59c/0x9c0 [i915]
<4> [39.097174] i915_driver_load+0xd96/0x1880 [i915]
<4> [39.097640] i915_pci_probe+0x29/0xa0 [i915]
<4> [39.098145] pci_device_probe+0xa1/0x120
<4> [39.098607] really_probe+0xf3/0x3e0
<4> [39.099031] driver_probe_device+0x10a/0x120
<4> [39.099599] device_driver_attach+0x4b/0x50
<4> [39.100033] __driver_attach+0x97/0x130
<4> [39.100525] bus_for_each_dev+0x74/0xc0
<4> [39.100954] bus_add_driver+0x13f/0x210
<4> [39.101441] driver_register+0x56/0xe0
<4> [39.101891] do_one_initcall+0x58/0x2e0
<4> [39.102319] do_init_module+0x56/0x1ea
<4> [39.102805] load_module+0x2701/0x29e0
<4> [39.103231] __se_sys_finit_module+0xd3/0xf0
<4> [39.103727] do_syscall_64+0x55/0x190
<4> [39.104153] entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4> [39.104736]
-> #0 (wakeref#3){+.+.}:
<4> [39.105437] lock_acquire+0xa6/0x1c0
<4> [39.105923] __mutex_lock+0x8c/0x960
<4> [39.106345] atomic_dec_and_mutex_lock+0x33/0x50
<4> [39.106897] intel_engine_pm_put+0x1b/0x40 [i915]
<4> [39.107375] i915_request_retire+0x477/0xaf0 [i915]
<4> [39.107930] ring_retire_requests+0x86/0x160 [i915]
<4> [39.108412] i915_retire_requests+0x58/0xc0 [i915]
<4> [39.108934] i915_gem_shrink+0xd8/0x5b0 [i915]
<4> [39.109431] i915_gem_shrinker_scan+0x59/0x130 [i915]
<4> [39.109884] do_shrink_slab+0x131/0x3e0
<4> [39.110380] shrink_slab+0x228/0x2c0
<4> [39.110810] shrink_node+0x177/0x460
<4> [39.111317] balance_pgdat+0x239/0x580
<4> [39.111743] kswapd+0x186/0x570
<4> [39.112221] kthread+0x119/0x130
<4> [39.112641] ret_from_fork+0x3a/0x50
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190408091728.20207-3-chris@chris-wilson.co.uk
Chris Wilson [Mon, 8 Apr 2019 09:17:01 +0000 (10:17 +0100)]
drm/i915/guc: Replace WARN with a DRM_ERROR
Replace the WARN with a simple if() + error message to squech the sparse
warning that entire wait_for() macro was being stringified:
drivers/gpu/drm/i915/intel_guc_submission.c:658:9: error: too long token expansion
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190408091728.20207-2-chris@chris-wilson.co.uk
Imre Deak [Fri, 5 Apr 2019 15:36:57 +0000 (18:36 +0300)]
drm/i915/icl: Simplify release of encoder power refs
We can unconditionally release the power references during encoder
disabling. The references for each port used by the encoder are
guaranteed to be enabled at this point.
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405153657.20921-2-imre.deak@intel.com
Imre Deak [Sun, 7 Apr 2019 12:46:55 +0000 (15:46 +0300)]
drm/i915: Get power refs in encoder->get_power_domains()
Push getting the reference for the encoders' power domains into the
encoder get_power_domains() hook instead of doing this from the caller.
This way the encoder can store away the corresponding wakerefs.
This fixes the DSI encoder disabling, which didn't release these
power references it acquired during HW state readout.
Note that longtime ownership for the corresponding wakerefs can be thus
acquired / released in two ways. Nevertheless there is always only one
owner for them:
After HW readout (booting/system resume):
- encoder->get_power_domains() acquires
- encoder->disable*() releases
After a modeset (calling intel_atomic_commit()):
- encoder->enable*() acquires
- encoder->disable*() releases
* can be any of the encoder enable/disable hooks.
v2:
- Check that the DSI io_wakerefs are unset both during encoder HW
readout and enabling. (Chris)
Fixes: 0e6e0be4c9523 ("drm/i915: Markup paired operations on display power domains")
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190407124655.31536-1-imre.deak@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:26 +0000 (14:00 +0300)]
drm/i915/cdclk: have only one init/uninit function
While transitioning to having better clarity between the modules, it's
desirable to have the function name prefixes reflect the
module. Functions in intel_foo.c should be prefixed intel_foo_.
Expose only one CDCLK init/uninit function from intel_cdclk.c instead of
one per platform. Obviously this adds one "unnecessary" if ladder within
the entry points. However it should be considered more of a CDCLK
implementation detail how this is done per platform, instead of exposing
the fact. In other words, abstract the CDCLK module better.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f63ed6e129098a32c63735be6cffa4756e7947af.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:25 +0000 (14:00 +0300)]
drm/i915: extract intel_cdclk.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c128d7be3f621391e571e86b03f302f3ffd0ed2b.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:24 +0000 (14:00 +0300)]
drm/i915: extract intel_sprite.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/679c857a1933ee3d0706f978ab05ca880cd30a00.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:23 +0000 (14:00 +0300)]
drm/i915: extract intel_dvo.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1ccf9000ad33b895aea06be41053a5b7bac8459e.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:22 +0000 (14:00 +0300)]
drm/i915: extract intel_lvds.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5d54d02cf7b7bfe3f78ed60d28534c5726371af3.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:21 +0000 (14:00 +0300)]
drm/i915: extract intel_tv.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f44c21e3d154e47233ebef4267ce1a924fa38df7.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:20 +0000 (14:00 +0300)]
drm/i915: extract intel_pipe_crc.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b106b21ef11ff7fc34537b2c029a1332c8573fcc.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:19 +0000 (14:00 +0300)]
drm/i915: extract intel_atomic_plane.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
v2: revert intel_plane_destroy_state() movement within intel_atomic_plane.c
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fd56c1cbba22b9f195ad944d79f7977423b2b533.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:18 +0000 (14:00 +0300)]
drm/i915: extract intel_hdmi.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/357856c31e309f0af8eed0d800623a5253ff3a37.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:17 +0000 (14:00 +0300)]
drm/i915: extract intel_dp.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f86f9beed730eaad0bdcc18b18817b3d221e16e2.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:16 +0000 (14:00 +0300)]
drm/i915: extract intel_fbdev.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/82d11bf634094f44a7469a096de3d3768314d6bc.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:15 +0000 (14:00 +0300)]
drm/i915: extract intel_pm.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
v2: gen6_rps_reset_ei() is in i915_irq.c not intel_pm.c.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/adc6463b95eef3440fba9826793f7d1c5f3b0b4a.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:14 +0000 (14:00 +0300)]
drm/i915: extract intel_panel.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c9f02ae09123866bc55269175ab75e844ffbd6ac.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:13 +0000 (14:00 +0300)]
drm/i915: extract intel_hdcp.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8348620b32cb4438ccfb5f7bbe9a18ff6b7c48a0.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:12 +0000 (14:00 +0300)]
drm/i915: extract intel_sdvo.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c507e15fef019541da5bb33f2fbe920a5ad2f3dc.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:11 +0000 (14:00 +0300)]
drm/i915: extract intel_lspcon.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b01cae3b5307d31c34de2321d6d2913f1cc39a12.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:10 +0000 (14:00 +0300)]
drm/i915: extract intel_color.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fe5928586b4ca538cc4bc99212c5b699e891c75e.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:09 +0000 (14:00 +0300)]
drm/i915: extract intel_psr.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
v2: Fix checkpatch whitespace complaint
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7e776690bf139ccdd0306b30df08dc68e74603de.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:08 +0000 (14:00 +0300)]
drm/i915: extract intel_fbc.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
v2: Remove stray newline (Chris)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/db44ba199c86f24bfa9e490531eddf51cccd89da.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:07 +0000 (14:00 +0300)]
drm/i915: extract intel_csr.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
v2: Add function argument names to fix checkpatch warning
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/44ceebca0206de9c40dc6794b660d84b8994f700.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:06 +0000 (14:00 +0300)]
drm/i915: extract intel_connector.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4b8e9d1fa8f0f0420ecc65063bdb7d068c13086e.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:05 +0000 (14:00 +0300)]
drm/i915: extract intel_ddi.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/61d159117475a48a5db7bd7d652c198d4fa08d7b.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:04 +0000 (14:00 +0300)]
drm/i915: extract intel_crt.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/19c39bfcfb82f50c77382e8dea4fe1ad6cd043ed.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:03 +0000 (14:00 +0300)]
drm/i915: extract intel_audio.h from intel_drv.h
It used to be handy that we only had a couple of headers, but over time
intel_drv.h has become unwieldy. Extract declarations to a separate
header file corresponding to the implementation module, clarifying the
modularity of the driver.
Ensure the new header is self-contained, and do so with minimal further
includes, using forward declarations as needed. Include the new header
only where needed, and sort the modified include directives while at it
and as needed.
No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e0284c4d62effa5bad72ce034206c26e3aa02884.1554461791.git.jani.nikula@intel.com
Jani Nikula [Fri, 5 Apr 2019 11:00:02 +0000 (14:00 +0300)]
drm/i915: make intel_frontbuffer.h self-contained
This will be helpful in the follow-up work. No functional changes.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9a19d43987006e4249b335f3d843da43c998376c.1554461791.git.jani.nikula@intel.com
Ville Syrjälä [Fri, 5 Apr 2019 14:13:49 +0000 (17:13 +0300)]
drm/i915: Fix pipe_bpp readout for BXT/GLK DSI
The only bpc information in pipe registers for BXT/GLK DSI
is the PIPEMISC dither bpc. Let's try to use that to read
out pipe_bpp on these platforms. However, I'm not sure if
this will be correctly populated by the GOP since bspec
suggests it's only needed if dithering is actually enabled.
If not I guess we'll have to go one step further and
extract pipe_bpp from the DSI pixel format when dithering
is disabled.
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: ca0b04db14a5 ("drm/i915/dsi: Fix pipe_bpp for handling for 6 bpc pixel-formats")
References: https://bugs.freedesktop.org/show_bug.cgi?id=109516
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405141349.11950-1-ville.syrjala@linux.intel.com
Chris Wilson [Sat, 6 Apr 2019 08:03:41 +0000 (09:03 +0100)]
drm/i915: Track the temporary wakerefs used for hsw_get_pipe_config
Haswell+ require many power wells to probe the current HW display state.
Under the wakeref tracking scheme, we want each owner to store and
release the wakeref they use, so we can identify callers that have
leaked their wakeref. For hsw_get_pipe_config, this means we have to
keep the array of all wakerefs as it current acquires its power wells
piecemeal and releases them en masse.
By tracking these wakerefs, we should be able to eliminate a lot of
noise from the runtime-pm debug logs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190406080341.2654-1-chris@chris-wilson.co.uk
Janusz Krzysztofik [Sat, 6 Apr 2019 10:40:34 +0000 (11:40 +0100)]
drm/i915: Mark GEM wedged right after marking device unplugged
As soon as a device is considered unplugged, not only prevent pending
users from accessing the device structures but also cancel all their
pending requests so all consumed resources can be cleaned up as soon
as possible.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190406104034.31380-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 5 Apr 2019 20:24:19 +0000 (21:24 +0100)]
drm/i915: Convert i915_reset.c over to using uncore mmio
Currently i915_reset.c mixes calls to intel_uncore, pci and our old
style I915_READ mmio interfaces. Cast aside the old implicit macros,
and harmonise on using uncore throughout.
add/remove: 1/1 grow/shrink: 0/4 up/down: 65/-207 (-142)
Function old new delta
rmw_register - 65 +65
gen8_reset_engines 945 942 -3
g4x_do_reset 407 376 -31
intel_gpu_reset 545 509 -36
clear_register 63 - -63
i915_clear_error_registers 461 387 -74
A little bit of pointer dancing elimination works wonders.
v2: Roll up the helpers into intel_uncore for general use
With the helpers gcc was a little more eager to inline:
add/remove: 0/1 grow/shrink: 1/3 up/down: 99/-133 (-34)
Function old new delta
i915_clear_error_registers 461 560 +99
gen8_reset_engines 945 942 -3
g4x_do_reset 407 376 -31
intel_gpu_reset 545 509 -36
clear_register 63 - -63
Total: Before=
1544400, After=
1544366, chg -0.00%
Win some, lose some, gcc is gcc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405202419.3093-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 5 Apr 2019 18:15:50 +0000 (19:15 +0100)]
drm/i915: Make use of 'engine->uncore'
The engine has a direct link to the intel_uncore mmio handler, so make
use of it rather than going indirectly via &engine->i915->uncore.
v2: Update gen11_lock_sfc() to use engine->uncore as well
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405181550.7630-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 5 Apr 2019 12:38:31 +0000 (13:38 +0100)]
drm/i915: Make RING_PDP relative to engine->mmio_base
The PDP registers are an oddity inside the set of context saved
registers in that they take the engine as a parameter to the macro and
not the mmio_base as the others do. Make it accept the engine->mmio_base
for consistency in programming the context registers.
add/remove: 0/0 grow/shrink: 2/1 up/down: 3/-32 (-29)
Function old new delta
emit_ppgtt_update 324 326 +2
capture 5102 5103 +1
execlists_init_reg_state.isra 1128 1096 -32
And similar savings later!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405123831.9724-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 5 Apr 2019 11:14:30 +0000 (12:14 +0100)]
drm/i915/selftests: Fix plain use of integer 0 as NULL
Quelch a sparse warning:
drivers/gpu/drm/i915/gt/selftest_lrc.c:119:54: warning: Using plain integer as NULL pointer
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405111430.18495-1-chris@chris-wilson.co.uk
Chris Wilson [Fri, 29 Mar 2019 13:40:24 +0000 (13:40 +0000)]
drm/i915/execlists: Enable coarse preemption boundaries for gen8
When we introduced preemption, we chose to keep it disabled for gen8 as
supporting preemption inside GPGPU user batches required various w/a in
userspace. Since then, the desire to preempt long queues of requests
between batches (e.g. within busywaiting semaphores) has grown. So allow
arbitration within the busywaits and between requests, but disable
arbitration within user batches so that we can preempt between requests
and not risk breaking GPGPU.
However, since this preemption is much coarser and doesn't interfere
with userspace, we decline to include it amongst the scheduler
capabilities. (This is also required for us to skip over the preemption
selftests that expect to be able to preempt user batches.)
Michal suggested that we could perhaps allow preemption inside gen8
userspace batches if we can satisfy ourselves that the default
preemption settings are viable with existing userspace (principally
OpenCL which already should carry any known workaround). We could then
merge the two code paths back into one, even dropping the artifical
has-preemption device feature flag.
Testcase: igt/gem_exec_scheduler/semaphore-user
References:
beecec901790 ("drm/i915/execlists: Preemption!")
Fixes: e88619646971 ("drm/i915: Use HW semaphores for inter-engine synchronisation on gen8+")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com> #irc
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190329134024.5254-1-chris@chris-wilson.co.uk
Chris Wilson [Wed, 3 Apr 2019 08:21:32 +0000 (09:21 +0100)]
drm/i915: Use lockdep_pin_lock() over the construction of the request
During request construction, we take the timeline->mutex to ensure
exclusive access to the ringbuffer (for command emission) and the
timeline itself (for command ordering). The timeline->mutex should not
be dropped by callers until we release it in i915_request_add().
lockdep provides a pin/unpin lock facility to detect accidental unlocks
inside critical sections, so put it to use for request construction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403082132.327-1-chris@chris-wilson.co.uk
Jani Nikula [Wed, 3 Apr 2019 13:52:36 +0000 (16:52 +0300)]
drm/i915: add Makefile magic for testing headers are self-contained
The below commits added dummy files to test that certain headers are
self-contained, i.e. compilable as standalone units:
39e2f501c1b4 ("drm/i915: Split struct intel_context definition to its own header")
3a891a626794 ("drm/i915: Move intel_engine_mask_t around for use by i915_request_types.h")
8b74594aa455 ("drm/i915: Split out i915_priolist_types into its own header")
The idea is fine, but the implementation is a bit tedious and
inflexible, and does not really scale well.
Implement the same in make using autogenerated dummy sources to include
the headers.
v2 by Chris:
- Use patsubst
- Add .gitignore
- Add clean-files for generated dummy sources
v3 by Jani:
- Fix make clean
- Add the tests to i915-y instead of extra-y
v4 by Jani:
- quiet_cmd whitespace fix
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403135236.8398-1-jani.nikula@intel.com
Chris Wilson [Thu, 4 Apr 2019 07:33:57 +0000 (08:33 +0100)]
drm/i915: Fixup kerneldoc for intel_cdclk_needs_cd2x_update
drivers/gpu/drm/i915/intel_cdclk.c:2116: warning: Function parameter or member 'dev_priv' not described in 'intel_cdclk_needs_cd2x_update'
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Abhay Kumar <abhay.kumar@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404073357.18795-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 4 Apr 2019 10:19:14 +0000 (11:19 +0100)]
drm/i915: Be precise in types for i915_gem_busy
Mixing u8 and -1u together leads to zero-extended integer expansion, and
comparing 0x000000ff against 0xffffffff, causing us to report a mixed
uabi-class request as not busy.
The input flag is a u8, and we want to generate a u32 uABI response,
mark our functions so.
Fixes: c8b502422bfe ("drm/i915: Remove last traces of exec-id (GEM_BUSY)")
Testcase: igt/gem_exec_balance/busy
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190404101914.7231-1-chris@chris-wilson.co.uk
Joonas Lahtinen [Thu, 4 Apr 2019 14:43:58 +0000 (17:43 +0300)]
drm/i915: Update DRIVER_DATE to
20190404
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Ville Syrjälä [Wed, 3 Apr 2019 19:16:33 +0000 (22:16 +0300)]
drm/i915: Expose full 1024 LUT entries on ivb+
On ivb+ we can select between the regular 10bit LUT mode with
1024 entries, and the split mode where the LUT is split into
seprate degamma and gamma halves (each with 512 entries). Currently
we expose the split gamma size of 512 as the GAMMA/DEGAMMA_LUT_SIZE.
When using only degamma or gamma (not both) we are wasting half of
the hardware LUT entries. Let's flip that around so that we expose
the full 1024 entries and just throw away half of the user provided
entries when using the split gamma mode.
Cc: Matt Roper <matthew.d.roper@intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401200231.2333-8-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Ville Syrjälä [Mon, 1 Apr 2019 20:02:30 +0000 (23:02 +0300)]
drm/i915: Expose the legacy LUT via the GAMMA_LUT/GAMMA_LUT_SIZE props on gen2/3
Just so we don't leave gen2/3 out in the cold let's advertize the
legacy LUT via the GAMMA_LUT/GAMMA_LUT_SIZE props. Without the
GAMMA_LUT prop we can't actually load a LUT using the atomic ioctl
(in preparation for the day of 100% atomic driver).
Supposedly some gen2/3 platforms have an interpolated 10bit gamma mode
as well. It's slightly funkier than the i965+ mode since you have to
specify the slope for the interpolation by hand. But when I tried it
I couldn't get it to work, the hardware just insisted on using the
8bit more regardless of the state of the relevant PIPECONF bit.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401200231.2333-7-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Ville Syrjälä [Mon, 1 Apr 2019 20:02:29 +0000 (23:02 +0300)]
drm/i915: Add "10.6" LUT mode for i965+
i965+ have an interpolate 10bit LUT mode. Let's expose that so
that we can actually enjoy real 10bpc.
v2: Don't use I915_WRITE_FW() yet
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401200231.2333-6-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Ville Syrjälä [Mon, 1 Apr 2019 20:02:28 +0000 (23:02 +0300)]
drm/i915: Add 10bit LUT for ilk/snb
Plop in support for 10bit LUT on ilk/snb.
There is no split gamma mode on these platforms, so we have
to choose between degamma and gamma. That could be a runtime choice
but for now let's just advertize the gamma as having 1024 entries.
We'll also keep the ctm hidden for now.
v2: Don't use I915_WRITE_FW() yet
Introduce bool has_ctm (Maarten)
Call drm_crtc_enable_color_mgmt() uncoditionally (Maarten)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401200231.2333-5-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Ville Syrjälä [Mon, 1 Apr 2019 20:02:27 +0000 (23:02 +0300)]
drm/i915: Implement split/10bit gamma for ivb/hsw
Reuse the bdw+ code to get split/10bit gamma for
ivb/hsw. The hardware is nearly identical. The
only slight snag is that on ivb/hsw the precision
palette auto increment mode does not work. So we
must increment the index manually. We'll probably
want to stick to the auto increment mode on bdw+
in the name of efficiency.
Also we want to avoid using the CSC for limited range
RGB output as PIPECONF will take care of that on IVB.
v2: Rebase due to EXT_GC_MAX/EXT2_GC_MAX changes
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401200231.2333-4-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Ville Syrjälä [Mon, 1 Apr 2019 20:02:26 +0000 (23:02 +0300)]
drm/i915: Don't use split gamma when we don't have to
Using the split gamma mode when we don't have to has the annoying
requirement of loading a linear LUT to the unused half. Instead
let's make life simpler by switching to the 10bit gamma mode
and duplicating each entry.
This also allows us to load the software gamma LUT into the
hardware degamma LUT, thus removing some of the buggy
configurations we currently allow (YCbCr/limited range RGB
+ gamma LUT). We do still have other configurations that are
also buggy, but those will need more complicated fixes
or they just need to be rejected. Sadly GLK doesn't have
this flexibility anymore and the degamma and gamma LUTs
are very different so no help there.
v2: Apply a mask when checking gamma_mode on icl since it
contains more bits than just the gamma mode
v3: Rebase due to EXT_GC_MAX/EXT2_GC_MAX changes
v4: s/advertize/advertise/ (Uma)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401200231.2333-3-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Ville Syrjälä [Mon, 1 Apr 2019 20:02:25 +0000 (23:02 +0300)]
drm/i915: Extract ilk_lut_10()
Extract a helper to calculate the ILK+ 10bit gamma LUT entry.
It's already duplicated twice, and soon we'll have more.
v2: s/it/bit/ (Matt)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401200231.2333-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Ville Syrjälä [Wed, 27 Mar 2019 10:13:21 +0000 (12:13 +0200)]
drm/i915: Skip modeset for cdclk changes if possible
If we have only a single active pipe and the cdclk change only requires
the cd2x divider to be updated bxt+ can do the update with forcing a full
modeset on the pipe. Try to hook that up.
v2:
- Wait for vblank after an optimized CDCLK change.
- Avoid optimization if the pipe needs a modeset (or was disabled).
- Split CDCLK change to a pre/post plane update step.
v3:
- Use correct version of CDCLK state as old state. (Ville)
- Remove unused intel_cdclk_can_skip_modeset()
v4:
- For consistency call intel_set_cdclk_post_plane_update() only during
modesets (and not fastsets).
v5:
- Remove the logic to update the CD2X divider on-the-fly on ICL, since
only a divider of 1 is supported there. Clint also noticed that the
pipe select bits in CDCLK_CTL are oddly defined on ICL, it's not clear
yet whether that's only an error in the specification.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Tested-by: Abhay Kumar <abhay.kumar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327101321.3095-1-imre.deak@intel.com
Imre Deak [Wed, 20 Mar 2019 13:54:38 +0000 (15:54 +0200)]
drm/i915: Remove redundant store of logical CDCLK state
We copied the original state into the atomic state already earlier in
the function, so no need to do it a second time.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320135439.12201-3-imre.deak@intel.com
Imre Deak [Wed, 20 Mar 2019 13:54:37 +0000 (15:54 +0200)]
drm/i915: Save the old CDCLK atomic state
The old state will be needed by an upcoming patch to determine if the
commit increases or decreases CDCLK, so move the old state to the atomic
state (while keeping the new one in dev_priv). cdclk.logical and
cdclk.actual in the atomic state isn't used atm anywhere after the
atomic check phase, so this should be safe.
v2:
- Use swap() instead of opencoding it. (Ville)
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320135439.12201-2-imre.deak@intel.com
Ville Syrjälä [Wed, 20 Mar 2019 13:54:36 +0000 (15:54 +0200)]
drm/i915: Force 2*96 MHz cdclk on glk/cnl when audio power is enabled
CDCLK has to be at least twice the BLCK regardless of audio. Audio
driver has to probe using this hook and increase the clock even in
absence of any display.
v2: Use atomic refcount for get_power, put_power so that we can
call each once(Abhay).
v3: Reset power well 2 to avoid any transaction on iDisp link
during cdclk change(Abhay).
v4: Remove Power well 2 reset workaround(Ville).
v5: Remove unwanted Power well 2 register defined in v4(Abhay).
v6:
- Use a dedicated flag instead of state->modeset for min CDCLK changes
- Make get/put audio power domain symmetric
- Rebased on top of intel_wakeref tracking changes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Tested-by: Abhay Kumar <abhay.kumar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320135439.12201-1-imre.deak@intel.com
Chris Wilson [Fri, 29 Mar 2019 15:49:12 +0000 (15:49 +0000)]
drm/i915: Move the decision to use the breadcrumb tasklet to the backend
Use the engine->flags to store whether we want to kick the submission
tasklet on receipt of a breadcrumb interrupt, so that this decision can
be made by the submission backend and not dependent on a limited feature
test within the interrupt handler. This should make it easier to adapt to
different submission backends.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Xiaolin Zhang <xiaolin.zhang@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190329154912.13781-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tvrtko Ursulin [Wed, 3 Apr 2019 06:44:07 +0000 (07:44 +0100)]
drm/i915: Fix uninitialized mask in intel_device_info_subplatform_init
Mask need to be initialized to zero since device id checks may not match.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 805446c8347c ("drm/i915: Introduce concept of a sub-platform")
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190403064407.25646-1-tvrtko.ursulin@linux.intel.com
Daniele Ceraolo Spurio [Tue, 2 Apr 2019 20:10:32 +0000 (13:10 -0700)]
drm/i915: rename init/fini/prune uncore functions
Add "_mmio" postfix to be consistent from the init/fini phase they're
called from.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190402201032.15841-2-daniele.ceraolospurio@intel.com
Daniele Ceraolo Spurio [Tue, 2 Apr 2019 20:10:31 +0000 (13:10 -0700)]
drm/i915: add intel_uncore_init_early
Encapsulate the uncore early init and be consistent with the
"_early" naming.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190402201032.15841-1-daniele.ceraolospurio@intel.com
Bob Paauwe [Wed, 20 Mar 2019 21:15:46 +0000 (14:15 -0700)]
drm/i915/ehl: All EHL ports are combo phys
Unlike ICL, all of the output ports are combo phys so just return
true in intel_port_is_combophy for all EHL ports to indicate that.
v2: Return false in intel_port_is_tc since no EHL ports are TC. (Jose)
Cc: Jose Souza <jose.souza@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320211547.519266-1-bob.j.paauwe@intel.com
Chris Wilson [Mon, 1 Apr 2019 16:26:41 +0000 (17:26 +0100)]
drm/i915: Only emit one semaphore per request
Ideally we only need one semaphore per ring to accommodate waiting on
multiple engines in parallel. However, since we do not know which fences
we will finally be waiting on, we emit a semaphore for every fence. It
turns out to be quite easy to trick ourselves into exhausting our
ringbuffer causing an error, just by feeding in a batch that depends on
several thousand contexts.
Since we never can be waiting on more than one semaphore in parallel
(other than perhaps the desire to busywait on multiple engines), just
pick the first fence for our semaphore. If we pick the wrong fence to
busywait on, we just miss an opportunity to reduce latency.
An adaption might be to use sched.flags as either a semaphore counter,
or to track the first busywait on each engine, converting it back to a
single use bit prior to closing the request.
v2: Track first semaphore used per-engine (this caters for our basic
igt that semaphores are working).
Reported-by: Mika Kuoppala <mika.kuoppala@intel.com>
Testcase: igt/gem_exec_fence/long-history
Fixes: e88619646971 ("drm/i915: Use HW semaphores for inter-engine synchronisation on gen8+")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401162641.10963-3-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Mon, 1 Apr 2019 16:26:40 +0000 (17:26 +0100)]
drm/i915: Split out i915_priolist_types into its own header
For more intel_engine_mask_t detangling. This time so that we can use
intel_engine_mask_t inside the scheduling structs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401162641.10963-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Mon, 1 Apr 2019 16:26:39 +0000 (17:26 +0100)]
drm/i915: Move intel_engine_mask_t around for use by i915_request_types.h
We want to use intel_engine_mask_t inside i915_request.h, which means
extracting it from the general header file mess and placing it inside a
types.h. A knock on effect is that the compiler wants to warn about
type-contraction of ALL_ENGINES into intel_engine_maskt_t, so prepare
for the worst.
v2: Use intel_engine_mask_t consistently
v3: Move I915_NUM_ENGINES to its natural home at the end of the enum
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401162641.10963-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Mon, 1 Apr 2019 13:39:09 +0000 (14:39 +0100)]
drm/i915: Prefault before locking pages in shmem_pwrite
If the user passes in a pointer to a GGTT mmaping of the same buffer
being written to, we can hit a deadlock in acquiring the shmemfs page
(once as the write destination and then as the read source).
[<0>] io_schedule+0xd/0x30
[<0>] __lock_page+0x105/0x1b0
[<0>] find_lock_entry+0x55/0x90
[<0>] shmem_getpage_gfp+0xbb/0x800
[<0>] shmem_read_mapping_page_gfp+0x2d/0x50
[<0>] shmem_get_pages+0x158/0x5d0 [i915]
[<0>] ____i915_gem_object_get_pages+0x17/0x90 [i915]
[<0>] __i915_gem_object_get_pages+0x57/0x70 [i915]
[<0>] i915_gem_fault+0x1b4/0x5c0 [i915]
[<0>] __do_fault+0x2d/0x80
[<0>] __handle_mm_fault+0xad4/0xfb0
[<0>] handle_mm_fault+0xe6/0x1f0
[<0>] __do_page_fault+0x18f/0x3f0
[<0>] page_fault+0x1b/0x20
[<0>] copy_user_enhanced_fast_string+0x7/0x10
[<0>] _copy_from_user+0x37/0x60
[<0>] shmem_pwrite+0xf0/0x160 [i915]
[<0>] i915_gem_pwrite_ioctl+0x14e/0x520 [i915]
[<0>] drm_ioctl_kernel+0x81/0xd0
[<0>] drm_ioctl+0x1a7/0x310
[<0>] do_vfs_ioctl+0x88/0x5d0
[<0>] ksys_ioctl+0x35/0x70
[<0>] __x64_sys_ioctl+0x11/0x20
[<0>] do_syscall_64+0x39/0xe0
[<0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
We can reduce (but not eliminate!) the chance of this happening by
faulting the user_data before we take the page lock in
pagecache_write_begin(). One way to eliminate the potential recursion
here is by disabling pagefaults for the copy, and handling the fallback
to use an alternative method -- so convert to use kmap_atomic (which
should disable preemption and pagefaulting for the copy) and report
ENODEV instead of EFAULT so that our caller tries again with a different
copy mechanism -- we already check that the page should have been
faultable so a false negative should be rare.
Testcase: igt/gem_pwrite/self
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190401133909.31203-1-chris@chris-wilson.co.uk
Rodrigo Vivi [Fri, 15 Mar 2019 19:19:38 +0000 (12:19 -0700)]
x86/gpu: add ElkhartLake to gen11 early quirks
Let's reserve EHL stolen memory for graphics.
ElkhartLake is a gen11 platform which is compatible with
ICL changes.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190315191938.22211-2-rodrigo.vivi@intel.com
Tvrtko Ursulin [Wed, 27 Mar 2019 14:23:28 +0000 (14:23 +0000)]
drm/i915: Introduce concept of a sub-platform
Concept of a sub-platform already exist in our code (like ULX and ULT
platform variants and similar),implemented via the macros which check a
list of device ids to determine a match.
With this patch we consolidate device ids checking into a single function
called during early driver load.
A few low bits in the platform mask are reserved for sub-platform
identification and defined as a per-platform namespace.
At the same time it future proofs the platform_mask handling by preparing
the code for easy extending, and tidies the very verbose WARN strings
generated when IS_PLATFORM macros are embedded into a WARN type
statements.
v2: Fixed IS_SUBPLATFORM. Updated commit msg.
v3: Chris was right, there is an ordering problem.
v4:
* Catch-up with new sub-platforms.
* Rebase for RUNTIME_INFO.
* Drop subplatform mask union tricks and convert platform_mask to an
array for extensibility.
v5:
* Fix subplatform check.
* Protect against forgetting to expand subplatform bits.
* Remove platform enum tallying.
* Add subplatform to error state. (Chris)
* Drop macros and just use static inlines.
* Remove redundant IRONLAKE_M. (Ville)
v6:
* Split out Ironlake change.
* Optimize subplatform check.
* Use __always_inline. (Lucas)
* Add platform_mask comment. (Paulo)
* Pass stored runtime info in error capture. (Chris)
v7:
* Rebased for new AML ULX device id.
* Bump platform mask array size for EHL.
* Stop mentioning device ids in intel_device_subplatform_init by using
the trick of splitting macros i915_pciids.h. (Jani)
* AML seems to be either a subplatform of KBL or CFL so express it like
that.
v8:
* Use one device id table per subplatform. (Jani)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190327142328.31780-1-tvrtko.ursulin@linux.intel.com
projects / openwrt / staging / blogic.git / log