Jonas Gorski [Wed, 2 Dec 2015 22:24:46 +0000 (22:24 +0000)]
brcm63xx: add linux 4.4 support
Only netboot tested. Flash at your own risk.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47702
Jonas Gorski [Wed, 2 Dec 2015 22:23:22 +0000 (22:23 +0000)]
kernel: add linux 4.4 support
Based on 4.4-rc3. Runtime tested on MIPS.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47701
Jonas Gorski [Wed, 2 Dec 2015 22:19:31 +0000 (22:19 +0000)]
package: kernel: update dependencies for 4.4
Update dependencies for linux 4.4 and mark as broken where source code
needs updating.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47700
Jonas Gorski [Wed, 2 Dec 2015 22:19:11 +0000 (22:19 +0000)]
xtables-addons: update to 2.10
Fixes compilation with linux 4.4.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47699
Jonas Gorski [Wed, 2 Dec 2015 22:19:01 +0000 (22:19 +0000)]
kernel-version: drop 4.0 remnants
We don't support 4.0 anymore and it is EOL anyway.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47698
Jonas Gorski [Wed, 2 Dec 2015 22:18:20 +0000 (22:18 +0000)]
brcm63xx: Add NuCom R5010UNv2 support
This patch adds support for the NuCom R5010UNv2.
It's a BCM6328 based board. It has an onboard BCM43217 wifi chip. For this
wifi chip looks like the brcmsmac driver isn't still supported, b43 drivers are used
for the profile of the router.
It's worth mentioning this board was affected by a bug solved with
https://dev.openwrt.org/changeset/46707
Tested-by: Angel Fontan <angel.fontan@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47697
Jonas Gorski [Wed, 2 Dec 2015 22:16:37 +0000 (22:16 +0000)]
brcm63xx: drop 3.18 support
Drop 3.18 support; it will live on in CC.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47696
Jonas Gorski [Wed, 2 Dec 2015 22:16:23 +0000 (22:16 +0000)]
ipq806x: ap148/r7500: fix eth0 for non gige speeds
Eth0 is attached to mac0 of the switch with a fixed link and and not to
phy4 in single phy mode, so configuring it to anything but 1000FD will
break the connection, which will happen if a only 100 Mbit capapble device
is plugged into the wan port.
Fix this by not taking the state from phy4 and just configuring a fixed link
for eth0.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47695
Hauke Mehrtens [Wed, 2 Dec 2015 21:52:41 +0000 (21:52 +0000)]
kernel: update 4.1 to 4.1.13
- two upstreamed patches removed
- compile tested all targets using 4.1
- run tested ar71xx
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47694
Hauke Mehrtens [Wed, 2 Dec 2015 20:32:11 +0000 (20:32 +0000)]
mac80211: install new firmware for ath9k-htc on target
For quite some time new firmware for ath9k-htc devices
is available in
http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/ath9k_htc/
Moreover ath9k-htc kernel driver expects this new v1.4
firmware to exist in /lib/firmware/ath9k_htc.
What happens currently:
---------------------------->8--------------------------
[ 7.830000] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw
requested
[ 7.840000] usb 1-1: Direct firmware load for
ath9k_htc/htc_9271-1.4.0.fw failed with error -2
[ 7.850000] usb 1-1: Falling back to user helper
[ 7.870000] usbcore: registered new interface driver ath9k_htc
[ 7.880000] firmware ath9k_htc!htc_9271-1.4.0.fw:
firmware_loading_store: map pages failed
[ 7.890000] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[ 8.200000] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size:
50980
[ 8.440000] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33
credits
[ 10.720000] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3
[ 10.740000] ath9k_htc 1-1:1.0: FW RMW support: Off
[ 10.760000] ieee80211 phy0: Atheros AR9271 Rev:1
---------------------------->8--------------------------
And with that patch new firmware is used instead:
---------------------------->8--------------------------
[ 33.920000] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw
requested
[ 34.230000] usb 1-1: ath9k_htc: Transferred FW:
ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 34.480000] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33
credits
[ 34.740000] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.4
[ 34.750000] ath9k_htc 1-1:1.0: FW RMW support: On
---------------------------->8--------------------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47693
Jo-Philipp Wich [Wed, 2 Dec 2015 18:51:12 +0000 (18:51 +0000)]
bcm53xx: switch to ucidef_add_switch_ports()
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47692
Felix Fietkau [Wed, 2 Dec 2015 17:35:37 +0000 (17:35 +0000)]
mpc85xx: fix up m25p80 device id (#21286)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47691
Felix Fietkau [Wed, 2 Dec 2015 17:20:39 +0000 (17:20 +0000)]
lantiq: fix up m25p80 device ids (#20975)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47690
Jo-Philipp Wich [Wed, 2 Dec 2015 16:10:09 +0000 (16:10 +0000)]
tools: make-ext4fs: explicitely request C collation for sorting
Do not rely on the system default collaction when sorting directory entries
but explicitely request "C" collation.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47689
Hauke Mehrtens [Wed, 2 Dec 2015 15:24:53 +0000 (15:24 +0000)]
bcm53xx: update PCIe driver
This updates the iProc PCIe driver to the version currently submitted
for kernel 4.5.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47688
Hauke Mehrtens [Wed, 2 Dec 2015 15:23:08 +0000 (15:23 +0000)]
bcm53xx: update SMP patches
Broadcom submitted new SMP patches for this SoC to upstream Linux, add
them to OpenWrt.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47687
Hauke Mehrtens [Wed, 2 Dec 2015 15:19:29 +0000 (15:19 +0000)]
bcm53xx: activate workarounds for erratas
This also deactivates some workaround for erratas only seen in older
CPU cores and L2 cores not used in this SoC.
This partly reverts commit r44947.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47686
Hauke Mehrtens [Wed, 2 Dec 2015 15:14:58 +0000 (15:14 +0000)]
bcm53xx: move patch 132-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch
This patch is currently placed directly behind the SMP patches and has
nothing to do with SMP, move it to an other position.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47685
Felix Fietkau [Wed, 2 Dec 2015 13:52:08 +0000 (13:52 +0000)]
netifd: update to the latest version, fixes an issue with moving a wifi iface to a different network
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47683
Rafał Miłecki [Wed, 2 Dec 2015 09:24:52 +0000 (09:24 +0000)]
brcm47xx: add Netgear WN2500RP support
We generate V1 image only for now. We lack buttons support for V2.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47682
Jo-Philipp Wich [Tue, 1 Dec 2015 09:22:53 +0000 (09:22 +0000)]
mpc85xx: fix typo added in r47676
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47681
Jo-Philipp Wich [Mon, 30 Nov 2015 12:49:19 +0000 (12:49 +0000)]
mpc85xx: record board id and model name in /etc/board.json
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47680
Jo-Philipp Wich [Mon, 30 Nov 2015 12:32:12 +0000 (12:32 +0000)]
base-files: uci-defaults-new, config_generate: allow force tagged cpu ports
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47679
Imre Kaloz [Mon, 30 Nov 2015 11:57:32 +0000 (11:57 +0000)]
mwlwifi: update to latest revision, fixes a kernel panic
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 47677
Jo-Philipp Wich [Mon, 30 Nov 2015 11:09:29 +0000 (11:09 +0000)]
mpc85xx: convert to ucidef_add_switch_ports()
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47676
Jo-Philipp Wich [Mon, 30 Nov 2015 10:55:43 +0000 (10:55 +0000)]
base-files: uci-defaults-new: only emit force_link for additional ifaces
Only se4t the force_link property for non-lan, non-wan ifaces as it is
unnecessary in the default cases.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47675
Jo-Philipp Wich [Mon, 30 Nov 2015 10:43:31 +0000 (10:43 +0000)]
mvebu: switch network and led config defaults to board detection framework
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47674
Jo-Philipp Wich [Mon, 30 Nov 2015 10:43:18 +0000 (10:43 +0000)]
base-files: uci-defaults-new: fix unquoted variables
Properly quote variables in ucidef_set_interface_lan() and
ucidef_set_interface_lan(), otherwise interfaces with multiple devices
are not properly written into the configuration.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47673
Jo-Philipp Wich [Mon, 30 Nov 2015 10:17:20 +0000 (10:17 +0000)]
ar71xx: record board id and model name in /etc/board.json
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47672
Jo-Philipp Wich [Mon, 30 Nov 2015 10:17:05 +0000 (10:17 +0000)]
base-files: uci-defaults-new: add board id and name helpers
Add ucidef_set_board_id() and ucidef_set_model_name() procedures to store
model information in the board.json file.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47671
John Crispin [Sat, 28 Nov 2015 23:26:03 +0000 (23:26 +0000)]
ramips: remove duplicate patch
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47670
John Crispin [Sat, 28 Nov 2015 23:25:04 +0000 (23:25 +0000)]
procd: update to latest git HEAD
this adds a lot of ujail cleanups
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47669
John Crispin [Sat, 28 Nov 2015 23:24:59 +0000 (23:24 +0000)]
mac80211: rt2x00: fix WARN_ON_ONCE() caused by inbalanced set/clear of beacon enable bit
Signed-off-by: evaxige <evaxige@qq.com>
SVN-Revision: 47668
John Crispin [Sat, 28 Nov 2015 23:24:52 +0000 (23:24 +0000)]
ramips: adapt VoCore to new second spi device code
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47667
John Crispin [Sat, 28 Nov 2015 23:24:40 +0000 (23:24 +0000)]
ramips: add second SPI clocks
These clocks were missing in the changes introduced in r47573-47580
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47666
Rafał Miłecki [Thu, 26 Nov 2015 17:13:05 +0000 (17:13 +0000)]
kernel: add fix for missing include in spi-nor.h (#20973)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47665
Felix Fietkau [Thu, 26 Nov 2015 16:40:11 +0000 (16:40 +0000)]
kernel: revert a faulty upstream commit that was added with the spi-nor/m25p80 backport (fixes #20971)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47664
Jo-Philipp Wich [Thu, 26 Nov 2015 14:42:28 +0000 (14:42 +0000)]
ar71xx: switch network and led defaults to board detection framework
Also translate ucidef_add_switch_vlan() to ucidef_add_switch_ports() for better
switch topology mapping and improved default config generation.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47663
Imre Kaloz [Thu, 26 Nov 2015 14:08:37 +0000 (14:08 +0000)]
mwlwifi: update to latest version
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 47661
Jo-Philipp Wich [Thu, 26 Nov 2015 13:53:06 +0000 (13:53 +0000)]
base-files: uci-defaults-new, config_generate: support for gpio leds
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47660
Jo-Philipp Wich [Thu, 26 Nov 2015 13:53:02 +0000 (13:53 +0000)]
base-files: config_generate: regroup led generator code
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47659
Jo-Philipp Wich [Thu, 26 Nov 2015 12:46:09 +0000 (12:46 +0000)]
base-files: uci-defaults-new: remove ucidef_set_led_interface()
The only user was the hg255d board and config_generate did not even emit
proper uci for it.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47658
Jo-Philipp Wich [Thu, 26 Nov 2015 12:46:04 +0000 (12:46 +0000)]
ramips: hg255d: replace ucidef_set_led_interface() with ucidef_set_led_netdev()
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47657
Jo-Philipp Wich [Thu, 26 Nov 2015 12:04:43 +0000 (12:04 +0000)]
base-files: config_generate: support rssi leds
Add support for emitting rssi monitor and led configuration sections.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47656
Jo-Philipp Wich [Thu, 26 Nov 2015 12:04:38 +0000 (12:04 +0000)]
base-files: uci-defaults-new: fix storing rssi leds and triggers in board.json
Remove extra nesting of rssi leds in the led object and move rssi monitor
declaration to its own object.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47655
Jo-Philipp Wich [Thu, 26 Nov 2015 12:04:32 +0000 (12:04 +0000)]
base-files: config_generate: reformat for better readability and quote variables
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47654
Rafał Miłecki [Thu, 26 Nov 2015 11:43:16 +0000 (11:43 +0000)]
bcm53xx: update bcm53xxspiflash to match spi-nor backported from 4.4-rc1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47653
Jo-Philipp Wich [Thu, 26 Nov 2015 11:17:54 +0000 (11:17 +0000)]
base-files: uci-defaults-new: properly quote variables
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47652
Hauke Mehrtens [Wed, 25 Nov 2015 22:36:38 +0000 (22:36 +0000)]
lantiq: add dsl-vrx200-firmware-xdsl-b: add Annex B version of VRX200 DSL firmware
This adds the Annex B version of the VRX200 firmware.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
SVN-Revision: 47650
Hauke Mehrtens [Wed, 25 Nov 2015 22:33:17 +0000 (22:33 +0000)]
lantiq: dsl-vrx200-firmware-xdsl-a: rename to VRX200 and add annex a
This just renamed the package to indicate that this is the annex a version.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
SVN-Revision: 47649
Jo-Philipp Wich [Wed, 25 Nov 2015 15:43:50 +0000 (15:43 +0000)]
base-files: config_generate: handle switch port attributes and better group json_select
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47648
Jo-Philipp Wich [Wed, 25 Nov 2015 15:43:43 +0000 (15:43 +0000)]
base-files: config_generate: do not remove previously generated interfaces
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47647
Jo-Philipp Wich [Wed, 25 Nov 2015 15:43:33 +0000 (15:43 +0000)]
base-files: config_generate: properly handle multiple switches
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47646
Jo-Philipp Wich [Wed, 25 Nov 2015 15:43:28 +0000 (15:43 +0000)]
base-files: uci-defaults-new: add ucidef_add_switch_port_attr() helper
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47645
Jo-Philipp Wich [Wed, 25 Nov 2015 15:43:21 +0000 (15:43 +0000)]
base-files: uci-defaults-new: whitespace cleanup
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47644
Jo-Philipp Wich [Wed, 25 Nov 2015 15:43:15 +0000 (15:43 +0000)]
base-files: uci-defaults-new: don't store switch attr numbers as strings
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47643
Felix Fietkau [Wed, 25 Nov 2015 14:12:44 +0000 (14:12 +0000)]
gcc: make colors optional based on the GCC_COLORS env var
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47642
Jo-Philipp Wich [Wed, 25 Nov 2015 11:53:59 +0000 (11:53 +0000)]
Revert "ar71xx: migrate led and network setup to board detection framework"
The board detect code needs more fixes in order to work properly.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47641
John Crispin [Tue, 24 Nov 2015 22:00:55 +0000 (22:00 +0000)]
ralink: renable nand support
CONFIG_MTK_MTD_NAND was incorrectly disabled by r47619.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47640
Jo-Philipp Wich [Tue, 24 Nov 2015 21:16:38 +0000 (21:16 +0000)]
base-files: config_generate: support autogenerating vlans
Add support for generating vlans solely from the port layout description
given through ucidef_add_switch_ports().
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47639
Jo-Philipp Wich [Tue, 24 Nov 2015 21:16:35 +0000 (21:16 +0000)]
base-files: add ucidef_set_interface_wan() and ucidef_add_switch_ports()
Add further helper functions to uci-defaults-new.sh for easier declarations
of complex switch layouts.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47638
John Crispin [Tue, 24 Nov 2015 20:41:30 +0000 (20:41 +0000)]
lantiq: ltq-vdsl-app: update to version 4.16.6.3
In this upstream dsl driver app version the autoboot is deactivated activate
it again.
In addition to the update this also fixes some build warnings and makes it
use the same configure option as used in Lantiq UGW.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
SVN-Revision: 47637
John Crispin [Tue, 24 Nov 2015 20:41:18 +0000 (20:41 +0000)]
lantiq: ltq-vdsl-app: add dsl_cpe_pipe.sh
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
SVN-Revision: 47636
John Crispin [Tue, 24 Nov 2015 20:41:07 +0000 (20:41 +0000)]
lantiq: ltq-vdsl: update to version 4.16.6.3
In addition to the update this also fixes some build warnings and makes it
use the same configure option as used in Lantiq UGW.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
SVN-Revision: 47635
John Crispin [Tue, 24 Nov 2015 20:40:59 +0000 (20:40 +0000)]
lantiq: ltq-vdsl-mei: update to version 1.4.8.5
In addition to the update this also fixes some build warnings and makes it
use the same configure option as used in Lantiq UGW.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
SVN-Revision: 47634
John Crispin [Tue, 24 Nov 2015 20:40:49 +0000 (20:40 +0000)]
lantiq: ltq-vdsl-mei: register char device automatically
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
SVN-Revision: 47633
John Crispin [Tue, 24 Nov 2015 20:40:40 +0000 (20:40 +0000)]
lantiq: ltq-vdsl-mei: add mei_cpe_drv_test application
This application helps to debug some internal problems in the MEI driver.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
SVN-Revision: 47632
John Crispin [Tue, 24 Nov 2015 20:40:11 +0000 (20:40 +0000)]
lantiq: add dsl-vr9-firmware-xdsl
This adds the DSL firmware for the VR9/XRX200 SoCs.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
SVN-Revision: 47631
John Crispin [Tue, 24 Nov 2015 20:39:59 +0000 (20:39 +0000)]
lantiq: ltq-ifxos: fix build warnings
This makes the build script use the same configure options as used by
Lantiq UGW and fixes some warnings and cleans up some of the patches.
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@lantiq.com>
SVN-Revision: 47630
Felix Fietkau [Tue, 24 Nov 2015 20:30:06 +0000 (20:30 +0000)]
qos-scripts: remove faulty fallback of the device variable to eth0 (#20834)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47629
Hauke Mehrtens [Tue, 24 Nov 2015 20:12:21 +0000 (20:12 +0000)]
lantiq: fix compile error
This fixes a problem introduced in r47624.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47628
Felix Fietkau [Tue, 24 Nov 2015 19:29:56 +0000 (19:29 +0000)]
ramips: fix typo in image makefile (#18712)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47627
Felix Fietkau [Tue, 24 Nov 2015 19:09:56 +0000 (19:09 +0000)]
kernel: disable software protection bits for macronix flash chips at init
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47626
Felix Fietkau [Tue, 24 Nov 2015 19:09:45 +0000 (19:09 +0000)]
ath10k: fix memory allocation issues on platforms where DMA coherent memory is constrained
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47625
Felix Fietkau [Tue, 24 Nov 2015 18:59:28 +0000 (18:59 +0000)]
kernel: update m25p80 in 4.1 to the latest version from 4.4-rc1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47624
John Crispin [Tue, 24 Nov 2015 18:32:09 +0000 (18:32 +0000)]
base-files: show hint when JFFS2-partition is full and overlayfs mounted read-only
since r45833 and r45848 the overlayfs is automatically mounted read-only
(and blocks remounts as r/w) when JFFS2 is full. see ticket #19564
because of this normal file deletion is not possible anymore.
if a user logins interactively (e.g. SSH) show a hint for this,
that files must be removed in /overlay/upper/...
v2: fix subject line
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 47623
John Crispin [Tue, 24 Nov 2015 18:30:50 +0000 (18:30 +0000)]
ar71xx: add GL-Domino Pi support V3
This is the patch for GL-Domino Pi V3. Updated against the latest trunk.
Signed-off-by: alzhao<alzhao@gmail.com>
SVN-Revision: 47622
John Crispin [Tue, 24 Nov 2015 18:30:19 +0000 (18:30 +0000)]
ar71xx: add GL-AR300 support V3
This is the patch for GL-AR300 V3, tested against the latest trunk.
Signed-off-by: alzhao<alzhao@gmail.com>
SVN-Revision: 47621
John Crispin [Tue, 24 Nov 2015 18:29:59 +0000 (18:29 +0000)]
ar71xx: add GL-AR150 support V3
This is the 3rd version. Modified against the latest trunk.
Signed-off-by: alzhao<alzhao@gmail.com>
SVN-Revision: 47620
John Crispin [Tue, 24 Nov 2015 18:29:26 +0000 (18:29 +0000)]
ralink: add support for netis WF-2881
netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN.
It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0.
The following patch adds support for this device.
this device only works on top of UBI.
Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons (reset button)
* ethernet switch and USB diag LEDs
* UART
* GPIOs
* sysupgrade
Tested and not working
* failsafe
Signed-off-by: YounJae Rho <luxflow@live.com>
SVN-Revision: 47619
John Crispin [Tue, 24 Nov 2015 18:29:14 +0000 (18:29 +0000)]
oxnas: set irq of usb&sata to cpu1
V2:
The KD-20 also has USB 3.0.I modiy the set_irq_affinity usb 2 to set_irq_affinity ?hci_hcd 2 to bind usb 2.0&3.0 to cpu1.
Signed-off-by: Shonn Lu <countrysideboy@qq.com>
SVN-Revision: 47618
John Crispin [Tue, 24 Nov 2015 18:29:02 +0000 (18:29 +0000)]
ramips: add support for Youku YK1
Changes since V1:
I resend this patch for current trunk.The former V1 patch is for CC branch.
Signed-off-by: Shonn Lu <countrysideboy@qq.com>
SVN-Revision: 47617
John Crispin [Tue, 24 Nov 2015 18:28:54 +0000 (18:28 +0000)]
ramips: add second spi master sysclk
for mt7620, rt3883 and rt5350
Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47616
John Crispin [Tue, 24 Nov 2015 18:28:44 +0000 (18:28 +0000)]
wpa-supplicant: Get 802.11s ssid information from option mesh_id
The scripts for authsae and iw use the option mesh_id to get set the
"meshid" during a mesh join. But the script for wpad-mesh ignores the
option mesh_id and instead uses the option ssid. Unify the mesh
configuration and let the wpa_supplicant script also use the mesh_id from
the configuration.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47615
John Crispin [Tue, 24 Nov 2015 18:28:35 +0000 (18:28 +0000)]
authsae: Use kbit/s as mcast_rate unit like wpad
The OpenWrt wireless configuration for mcast_rate is defined as Kbit/s when
using wpa_supplicant for IBSS/802.11s and iw for unencrypted IBSS/802.11s.
But when using authsae, the unit for the same option is redefined as
Mbit/s. Better use the same unit for this option independent of the backend
which is used.
Old values for mcast_rate (< 1000) are still interpreted Mbit/s to avoid
problems during upgrades from older versions.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47614
John Crispin [Tue, 24 Nov 2015 18:28:19 +0000 (18:28 +0000)]
authsae: Fix meshid in authsae config
The variable $mesh_id was never defined in authsae_start_interface and thus
the option meshid in $authsae_conf_file was always set to "".
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 47613
John Crispin [Tue, 24 Nov 2015 18:28:05 +0000 (18:28 +0000)]
ar71xx: Build initramfs by default for Mikrotik devices
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
SVN-Revision: 47612
John Crispin [Tue, 24 Nov 2015 18:27:57 +0000 (18:27 +0000)]
uboot-imx6: fix build with gcc-5
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47611
John Crispin [Tue, 24 Nov 2015 18:27:43 +0000 (18:27 +0000)]
brcm2708: fix multi-device image generation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47610
Jo-Philipp Wich [Tue, 24 Nov 2015 13:39:53 +0000 (13:39 +0000)]
base-files: config_generate: honour port_mask property (#20963)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47609
Felix Fietkau [Sun, 22 Nov 2015 21:59:22 +0000 (21:59 +0000)]
ipq806x: another fix to the stmmac DMA configuration to fix remaining data corruption issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47603
Hauke Mehrtens [Sun, 22 Nov 2015 21:21:09 +0000 (21:21 +0000)]
ubox: update ubox to version 2015-11-22
This version fixes a potential uncontrolled format string problem. This
makes it possible to activate the format security check.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47600
Hauke Mehrtens [Sun, 22 Nov 2015 21:20:45 +0000 (21:20 +0000)]
mountd: update mountd to version 2015-11-22
This version fixes a potential uncontrolled format string problem. This
makes it possible to activate the format security check.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47599
Hauke Mehrtens [Sun, 22 Nov 2015 21:20:02 +0000 (21:20 +0000)]
fstools: update fstools to version 2015-11-22
This version fixes a potential uncontrolled format string problem. This
makes it possible to activate the format security check.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47598
Jo-Philipp Wich [Sun, 22 Nov 2015 20:52:10 +0000 (20:52 +0000)]
Revert "mvebu: migrate led and network setup to board detection framework"
Roll back the mvebu conversion to board detection code as we need to fix
some strcutural issues first.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47597
Jo-Philipp Wich [Sun, 22 Nov 2015 20:00:13 +0000 (20:00 +0000)]
ar71xx: fix network default config of the TEW-732BR
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47595
Felix Fietkau [Sun, 22 Nov 2015 19:07:00 +0000 (19:07 +0000)]
ipq806x: fix a nasty stmmac data corruption bug caused by faulty DMA initialization
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47594
Felix Fietkau [Sun, 22 Nov 2015 19:06:51 +0000 (19:06 +0000)]
ipq806x: update stmmac to the version from linux 4.3
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47593
Felix Fietkau [Sun, 22 Nov 2015 19:06:42 +0000 (19:06 +0000)]
ath10k-firmware: add board-2.bin for qca99x0
Keep board.bin as fallback for devices without OTP that load caldata
from flash
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47592
Felix Fietkau [Sun, 22 Nov 2015 19:06:33 +0000 (19:06 +0000)]
build: add support for choosing a different url filename part than the output file
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47591
projects / openwrt / staging / blogic.git / log