Koen Vandeputte [Wed, 21 Nov 2018 09:43:44 +0000 (10:43 +0100)]
kernel: bump 4.9 to 4.9.138
Refreshed all patches.
Compile-tested: ar71xx, layerscape
Runtime-tested: ar71xx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Rafał Miłecki [Thu, 22 Nov 2018 09:12:19 +0000 (10:12 +0100)]
bcm53xx: request Seama parser on DIR-885L directly
It's more reliable as mtd subsystem doesn't have to blindly try that
parser. It allows disabling MTD_SPLIT_FIRMWARE completely (TRX is
handled in a similar way).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Thu, 22 Nov 2018 09:11:30 +0000 (10:11 +0100)]
kernel: add DT binding support to the Seama parser
It allows specifying that parser directly in the DT.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Hans Dedecker [Wed, 21 Nov 2018 10:11:26 +0000 (11:11 +0100)]
glibc: update to latest 2.27 commit
1517dfb8aa Add an additional test to resolv/tst-resolv-network.c
1050634904 libanl: properly cleanup if first helper thread creation failed (bug 22927)
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Felix Fietkau [Wed, 21 Nov 2018 14:14:36 +0000 (15:14 +0100)]
mt76: update to the latest version
4734108 mt7603: use mt7603_wtbl_clear on station removal
9428e34 mt7603: fix watchdog reset sequence
b3f82a3 mt7603: report PSE reset failures via debugfs
a301dec mt7603: add back PSE client reset code
94cebfc mt7603: fix handling lost interrupt events during watchdog reset
b38fe7d mt7603: only issue PSE reset on PSE stuck
da666a7 mt7603: issue PSE reset if firmware debug register indicates stuck queues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 20 Nov 2018 15:55:47 +0000 (16:55 +0100)]
mt76: update to the latest version
471d397 mt7603: fix priority for buffered multicast packets
3873e82 mt7603: fix MT_BMAP_0/MT_GROUP_THD_0 register initializion for mt7628
749d5c3 mt7603: fix reserved page handling for mt7628
d22799b mt7603: reduce reserved pages for beacons
42c5281 mt7603: fix maximum frame size in scheduler init
fa7335b mt76: fix potential NULL pointer dereference in mt76_stop_tx_queues
84aa12a mt76: fix potential null pointer deref in mt76_sta_add
7c4c33c mt7603: skip efuse tx power data for mt7628
ca2c875 mt7603: add support for accessing remapped registers via ops
b44d793 mt7603: clear PSE redirections before MCU init
82363ab mt7603: move tx status to rx queue 0
c09e8a4 mt7603: fix buffering of tx packets for powersave clients
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Tue, 20 Nov 2018 13:28:25 +0000 (14:28 +0100)]
kernel: move diff adding run_parsers_by_type() between mtd patches
It makes more sense to add run_parsers_by_type() in a patch that
introduces parser types. That makes the other one just add a code using
it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 20 Nov 2018 12:42:19 +0000 (13:42 +0100)]
kernel: don't export parse_mtd_partitions_by_type() in 4.9 and 4.14
That function isn't used anywhere out of the mtdpart.c & can be static.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Jason A. Donenfeld [Mon, 19 Nov 2018 17:30:17 +0000 (18:30 +0100)]
wireguard: bump to 0.0.
20181119
* chacha20,poly1305: fix up for win64
* poly1305: only export neon symbols when in use
* poly1305: cleanup leftover debugging changes
* crypto: resolve target prefix on buggy kernels
* chacha20,poly1305: don't do compiler testing in generator and remove xor helper
* crypto: better path resolution and more specific generated .S
* poly1305: make frame pointers for auxiliary calls
* chacha20,poly1305: do not use xlate
This should fix up the various build errors, warnings, and insertion errors
introduced by the previous snapshot, where we added some significant
refactoring. In short, we're trying to port to using Andy Polyakov's original
perlasm files, and this means quite a lot of work to re-do that had stableized
in our old .S.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rafał Miłecki [Mon, 19 Nov 2018 12:33:05 +0000 (13:33 +0100)]
kernel: drop mtd_pad_erasesize() helper from 4.9 and 4.14
It has been last used in kernel 3.18 for uimage and squashfs splitters
embedded in the mtdpart.c.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Hans Dedecker [Mon, 19 Nov 2018 09:12:28 +0000 (10:12 +0100)]
netifd: update to latest git HEAD
4b83102 treewide: switch to C-code style comments
70506bf treewide: make some functions static
d9872db interface: fix removal of dynamic interfaces
2f7ef7d interface: rework code to get rid of interface_set_dynamic
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Rinki Kumari [Thu, 27 Sep 2018 16:10:15 +0000 (21:40 +0530)]
ar71xx: fix TP-Link Archer C7 v5 switch LEDs
Signed-off-by: Rinki Kumari <rinki13@gmail.com>
Felix Fietkau [Fri, 16 Nov 2018 12:43:15 +0000 (13:43 +0100)]
mt76: update to the latest version
96b3b3d mt76x2u: main: fix typo setting sta_state mac80211 callback
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 16 Nov 2018 11:43:45 +0000 (12:43 +0100)]
mt76: update to the latest version
009ab91 mt76: clean up more unused EXPORT_SYMBOLs
963768d mt76x02: fix regression in tx station race condition fix
d7788cc mt76: mt76x02: make group_wcid the first member in struct mt76x02_vif
e65ad4c mt7603: make group_wcid the first member in struct mt7603_vif
7b1373e mt76: mt76x02: remove mt76x02_txq_init
a97127b mt76: replace sta_add/remove ops with common sta_state function
13f1e82 mt7603: clear wtbl entry for removed stations
90e2c1b mt7603: add mt7603_wtbl_set_skip_tx, change mt7603_wtbl_set_ps users
41931e4 mt7603: toggle skip_tx on station add/remove
d0fdf01 mt7603: avoid unnecessary wtbl writes for ps-filter
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jason A. Donenfeld [Thu, 15 Nov 2018 20:14:49 +0000 (12:14 -0800)]
wireguard: bump to 0.0.
20181115
* Zinc no longer ships generated assembly code. Rather, we now
bundle in the original perlasm generator for it. The primary purpose
of this snapshot is to get testing of this.
* Clarify the peer removal logic and make lifetimes more precise.
* Use READ_ONCE for is_valid and is_dead.
* No need to use atomic when the recounter is mutex protected.
* Fix up macros and annotations in allowedips.
* Increment drop counter when staged packets are dropped.
* Use static constants instead of enums for 64-bit values in selftest.
* Mark large constants as ULL in poly1305-donna64.
* Fix sparse warnings in allowedips debugging code.
* Do not use wg_peer_get_maybe_zero in timer callbacks, since we now can
carefully control the lifetime of these functions and ensure they never
execute after dropping the last reference.
* Cleanup hashing in ratelimiter.
* Do not guard timer removals, since del_timer is always okay.
* We now check for PM_AUTOSLEEP, which makes the clear*on-suspend decision a
bit more general.
* Set csum_level to ~0, since the poly1305 authenticator certainly means
that no data was modified in transit.
* Use CHECKSUM_PARTIAL check for skb_checksum_help instead of
skb_checksum_setup check.
* wg.8: specify that wg(8) shows runtime info too
* wg.8: AllowedIPs isn't actually required
* keygen-html: add missing glue macro
* wg-quick: android: do not choke on empty allowed-ips
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Daniel Engberg [Fri, 9 Nov 2018 06:56:47 +0000 (07:56 +0100)]
util-linux: Update to 2.33
Update util-linux to 2.33
Refresh patch
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Pau Escrich [Fri, 12 Jan 2018 15:36:25 +0000 (16:36 +0100)]
ar71xx: add support for Gainstrong MiniBox V3.2
Adds MiniBox V3.2 ar71xx target (QCA99531 + QCA9887)
Info: http://oolite.cn/minibox-v3-2-qca9531-qca9887-module-pin-specification.html
Reference patch: http://oolite.cn/wp-content/uploads/2017/09/minibox_v3_cc15.05_20160325.patch
Installation: Upload firmware to uboot via HTTP at 192.168.1.1 (press button for 5 seconds)
Signed-off-by: Pau Escrich <p4u@dabax.net>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(daniel@makrotopia.org: rebased and fixed conflicts, fixed LED name,
added ath10k eeprom)
Rafał Miłecki [Thu, 15 Nov 2018 11:28:50 +0000 (12:28 +0100)]
kernel: fix ubifs loosing O_TMPFILE data after power cut
There was a bug in ubifs related to the O_TMPFILE. When reapplying
changes after power cut data could be lost. This problem was exposed by
overlayfs and the upstream commit
3a1e819b4e80 ("ovl: store file handle
of lower inode on copy up").
This fixes a regression introduced when switching from 4.9 to 4.14.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Hans Dedecker [Thu, 15 Nov 2018 10:29:04 +0000 (11:29 +0100)]
bison: update to 3.2.1
Chnages since 3.2:
b590ad02 version 3.2.1
05e70adf build: fix issues in the generated tarball
7efe0b5d build: fix typo
351e3630 NEWS: update
4fd1fc70 examples: ship them
e02ce4c7 build: minor fixes in doc/
7cab285e CI: maximize chances of errors sooner
86efe282 c++: improve the generated documentation
cf1446dc tests: don't fail if the C++ compiler does not work
e93c40b3 tests: don't disable C++ warnings in C files
eff67391 c++: workaround portability issue
5a0d7802 tests: work around getopt portability issues
f1e0839c doc: -Wzero-as-null-pointer-constant was added to GCC 4.7
3bf429ae examples: #include <cstring> in calc++
f8cadc73 c: provide a definition of _Noreturn that works for C++
bd7aebb8 c: update the definition of _Noreturn
ca8039e6 tests: don't expect the shell to support 'local'
5d07f4f7 bitset: fix warning
e605ad96 build: fix use of gnulib Make variables
50fac71d maint: post-release administrivia
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Kevin Darbyshire-Bryant [Mon, 12 Nov 2018 22:46:13 +0000 (22:46 +0000)]
hostapd: add utf8_ssid flag & enable as default
SSIDs may contain UTF8 characters but ideally hostapd should be told
this is the case so it can advertise the fact. Default enable this
option.
add uci option utf8_ssid '0'/'1' for disable/enable e.g.
config wifi-iface
option utf8_ssid '0'
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Koen Vandeputte [Wed, 14 Nov 2018 12:53:59 +0000 (13:53 +0100)]
kernel: bump 4.14 to 4.14.81
Refreshed all patches.
Removed upstreamed patches:
- 081-spi-bcm-qspi-switch-back-to-reading-flash-using-smal.patch
Altered patches:
- 0054-cpufreq-dt-Handle-OPP-voltage-adjust-events
Compile-tested on: cns3xxx, imx6, ipq806x, x86_64
Runtime-tested on: cns3xxx, imx6, x86_64
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Wed, 14 Nov 2018 12:53:03 +0000 (13:53 +0100)]
kernel: bump 4.9 to 4.9.137
Refreshed all patches.
Removed upstreamed hunks in:
- 703-phy-support-layerscape.patch
Compile-tested on: ar71xx, layerscape
Runtime-tested on: ar71xx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Wed, 14 Nov 2018 12:47:36 +0000 (13:47 +0100)]
kernel: bump 3.18 to 3.18.125
Refreshed all patches.
Compile-tested on: adm5120
Compile-tested on: none
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Ted Hess [Tue, 13 Nov 2018 20:40:30 +0000 (15:40 -0500)]
tools/pkg-config: Handle variable substitution of 'bindir' to redirect to STAGING_DIR/bin
Signed-off-by: Ted Hess <thess@kitschensync.net>
Felix Fietkau [Tue, 13 Nov 2018 20:21:51 +0000 (21:21 +0100)]
mt76: update to the latest version
6745830 mt76: fix race condition in station removal
7e5c819 mt76: add mt76_sta_remove helper
75aa36e mt7603: use wcid/wcid_mask from struct mt76_dev
fd85ff9 mt7603: use mt76_sta_remove helper
0848d2d mt7603: simplify mt7603_mcu_msg_send, remove skb_ret handling
83a80ca mt76: request tx status for powersave released EOSP packet
df5c797 mt76: fix uninitialized mutex access setting rts threshold
0bfa98e mt76: introduce mt76x02_config_mac_addr_list routine
4248446 mt76x0: pci: enable VHT rates in IBSS mode
f75efd8 mt76x2u: phy: add TX_SHAPING calibration
c1d67b4 mt76x2u: phy: run phy_channel_calibrate after channel switch
9fe0fe8 mt76x2u: main: use mt76x02_bss_info_changed utility routine
3fc95d7 mt76x2u: init: remove mt76x2u_init_beacon_offsets routine
88f6883 mt76: remove wait argument from mt76x02_mcu_calibrate
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 13 Nov 2018 19:34:35 +0000 (20:34 +0100)]
mac80211: fix spurious disconnections with powersave clients
Affects all drivers using ieee80211_tx_status_noskb, e.g. ath9k and mt76
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stijn Tintel [Mon, 12 Nov 2018 17:58:36 +0000 (19:58 +0200)]
kernel: bump 4.14 to 4.14.80
Refresh patches.
Compile-tested: ar71xx, ath79, x86/64
Runtime-tested: ar71xx, ath79, x86/64
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Sat, 10 Nov 2018 15:36:44 +0000 (17:36 +0200)]
kernel: drop old bluetooth config symbols
They do not exist in any of the supported kernel versions.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Daniel Engberg [Wed, 7 Nov 2018 21:36:03 +0000 (22:36 +0100)]
bzip2: Replace main site with mirrors (FS#1913)
Use Gentoo and FreeBSDs distfile caches as mirrors because
main site/domain is abandoned.
Source: https://lwn.net/Articles/762264/
Fixes FS#1913
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Daniel Engberg [Fri, 9 Nov 2018 06:38:30 +0000 (07:38 +0100)]
tools/cmake: Update to 3.12.4
Update cmake to 3.12.4
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Alexander Couzens [Sun, 11 Nov 2018 01:31:41 +0000 (02:31 +0100)]
ugps: update to latest git HEAD
07528d43f9bc nmea.c: set _BSD_SOURCE to have timegm() & stime() on musl
b88037b6bf6a check timegm return code
ccabdf6c235f nmea.c: Add null byte to nmea fields
cdc1478a8133 remove deprication warning
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Petr Štetiar [Fri, 9 Nov 2018 11:09:29 +0000 (12:09 +0100)]
Revert "iptables: fix dependency for libip6tc on IPV6"
This patch reverts commit
2dc1f54b1205094e7c6036cae6275d2c326bad3e as it
breaks the build for me on x86-64 if I've IPV6 support disabled. Same config
builds fine on `openwrt-18.06` branch at
55d078b2.
$ grep IPV6 .config
# CONFIG_KERNEL_IPV6 is not set
# CONFIG_IPV6 is not set
Build errors out on:
Package libiptc is missing dependencies for the following libraries:
libip6tc.so.0
Looking at iptables-1.6.2/libiptc/Makefile.am:
libiptc_la_LIBADD = libip4tc.la libip6tc.la
and to iptables-1.6.2/libiptc/libiptc.pc.in:
Requires: libip4tc libip6tc
It seems that libiptc needs v4/v6 libs, so v6 isn't optional.
Cc: Rosy Song <rosysong@rosinson.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Hans Dedecker [Sat, 10 Nov 2018 12:40:45 +0000 (13:40 +0100)]
ethtool: update to 4.19
8a1ad80 Release version 4.19.
ecdf295 ethtool: Fix uninitialized variable use at qsfp dump
98c148e ethtool: better syntax for combinations of FEC modes
d4b9f3f ethtool: support combinations of FEC modes
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Rafał Miłecki [Fri, 9 Nov 2018 21:28:31 +0000 (22:28 +0100)]
bcm53xx: add DT patch describing pins mux controller
It's needed to support new devices that use specific pin functions.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Fri, 9 Nov 2018 14:26:05 +0000 (15:26 +0100)]
mt76: update to the latest version
ffccb48 mt76: do not wake tx queues during flush
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Fri, 9 Nov 2018 13:57:45 +0000 (14:57 +0100)]
kernel: deprecate support for the generic "linux,part-probe" DT binding
It has been rejected upstream and instead a nice/more generic solution
has been implemented. It's possible now to describe partitions format
using "compatible" DT string.
No OpenWrt target uses "linux,part-probe" anymore, leave it only in case
some forks need it. It will be dropped with support for new kernels.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Kevin Darbyshire-Bryant [Thu, 8 Nov 2018 21:35:17 +0000 (21:35 +0000)]
tools: firmware-utils: mksercommfw build on Darwin
asm/byteorder.h & hence __cpu_to_be32() doesn't exist on Darwin
Shamelessly copy some byte swap functions from oseama.c
Acked-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Rafał Miłecki [Fri, 9 Nov 2018 12:30:51 +0000 (13:30 +0100)]
ramips: use separated mtd patch reverting write_page() removal
This helps understanding mtd changes needed to get downstream NAND
driver working.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Daniel Engberg [Wed, 7 Nov 2018 21:44:36 +0000 (22:44 +0100)]
popt: Add main site back to PKG_SOURCE_URL
Main site is back up after weeks of downtime.
Add it back as last resort
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Rafał Miłecki [Fri, 9 Nov 2018 06:40:42 +0000 (07:40 +0100)]
bcm53xx: update pinctrl driver
It's upstream now with a one trivial fix.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Hans Dedecker [Thu, 8 Nov 2018 13:46:56 +0000 (14:46 +0100)]
procd: update to latest git HEAD
20192e4 watchdog: improve seting watchdog timeout and frequency
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Daniel Golle [Mon, 5 Nov 2018 18:04:48 +0000 (19:04 +0100)]
oxnas: remove superseded sysupgrade image check
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 5 Nov 2018 17:17:35 +0000 (18:17 +0100)]
oxnas: kd20: correct memory size to 256MB
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Koen Vandeputte [Thu, 8 Nov 2018 11:46:37 +0000 (12:46 +0100)]
ramips: fix netgear r6120 factory image generation
as indicated in commit
c5bf408ed6bd "(ramips: fix image generation for mt76x8")
more rework was needed to fix the other issues.
Building on another machine, but using the same arch, showed
the application failing again for different reasons.
Fix this by completely rewriting the application, fixing following found issues:
- buffer overflows, resulting in stack corruption
- flaws in memory requirement calculations (too small, too large)
- memory leaks
- missing bounds checking on string handling
- non-reproducable images, by using unitilized memory in checksum calculation
- missing error handling, resulting in succes on specific image errors
- endianness errors when building on BE machines
- various minor build warnings
- documentation did not match the code actions (header item locations)
- allowing input to be decimal, hex or octal now
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Jo-Philipp Wich [Thu, 8 Nov 2018 10:52:33 +0000 (11:52 +0100)]
script: ipkg-build: honour $SOURCE_DATE_EPOCH
When the SOURCE_DATE_EPOCH environment variable is set, use it to
override the timestamps of .ipk archive contents.
This ensures that .ipk archives built in environments without SCM
metadata (mainly the SDK) are reproducible between different runs.
Ref: https://github.com/openwrt/packages/issues/6954
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Hans Dedecker [Mon, 5 Nov 2018 14:32:48 +0000 (15:32 +0100)]
iproute2: update to 4.19.0
Update to the latest version of iproute2; see https://lwn.net/Articles/769354/
for a full overview of the changes in 4.19.
Remove 190-add-cake-to-tc patch as CAKE qdisc is now supported in 4.19.0
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Felix Fietkau [Thu, 8 Nov 2018 08:17:18 +0000 (09:17 +0100)]
mt76: update to the latest version, fix a typo
29d9532 mt7603: fix faulty variable initialization in last commit
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 7 Nov 2018 19:35:23 +0000 (20:35 +0100)]
mt76: update to the latest version
417cf49 mt7603: improve recovery from MCU hang
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Wed, 7 Nov 2018 10:16:25 +0000 (11:16 +0100)]
mac80211: brcmfmac: backport the last accepted 4.21 changes
It's a typo fix & patch that helps debugging possible WARN-ings.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Wed, 7 Nov 2018 10:06:16 +0000 (11:06 +0100)]
mac80211: brcmfmac: backport NVRAM loading improvements
This adds support for storing board specific NVRAM files as firmware.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Wed, 7 Nov 2018 08:43:14 +0000 (09:43 +0100)]
mac80211: brcmfmac: backport firmware loading cleanup
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Wed, 7 Nov 2018 08:01:32 +0000 (09:01 +0100)]
mac80211: brcmfmac: backport the latest 4.20 changes
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Wed, 7 Nov 2018 07:52:46 +0000 (08:52 +0100)]
mac80211: brcmfmac: rename 4.20 backport patches
Include kernel version to help tracking changes.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Tue, 6 Nov 2018 21:25:06 +0000 (22:25 +0100)]
mt76: update to the latest version
172f081 mt76x0: do not overwrite other MT_BBP(AGC, 8) fields
2ae2046 mt76x0: phy: use mt76_poll_msec in mt76x0_phy_temp_sensor
add66a0 mt76x0: init: use mt76x02_mac_shared_key_setup in mt76x0_init_hardware
1f24db9 mt76x2: move wcid_tx_rate conf at bootstrap
097b2bd mt76x0: init: use mt76x02_mac_wcid_setup for wcid configuration
d0eb03e mt76x2u: init: remove not useful configuration
c7aa8f4 mt76x2u: init: use common routines for wcid/key initialization
bd568d9 mt76: move mt76x02_eeprom_copy in mt76x02-lib module
57b441d mt76x0: phy: introduce tssi calibration support
a78802c mt76x0: phy: use tssi reported value to configure tx power if available
94ad030 mt76: remove mcu_msg_alloc
15cb426 mt76: remove wait argument from mt76x02_mcu_function_select
cd76a83 mt76: remove wait argument from mt76x02_mcu_set_radio_state
9b97e0f mt76x02: run calibration after scanning
663b197 mt76x02: assure we update gain after scan
eb53745 mt76x0: dfs: fix IBI_R11 configuration on non-radar channels
ef06c30 mt76: avoid queue/status spinlocks while passing tx status to mac80211
5195257 mt7603: fix maximum rx frame size
01815e9 mt7603: use mutex from struct mt76_dev
3c8e8a7 mt7603: use irq_lock/irqmask from struct mt76_dev
8b7f50d mt76: add size check for additional rx fragments
87bad3a mt7603: stop MAC on watchdog reset
c34baab mt7603: add missing unlock in case changing the channel fails
ac6fc78 mt7603: add debugfs file to trigger watchdog resets
d9b5324 mt7603: add SPDX license identifiers
498d716 mt7603: fix checkpatch issues
a1afefd mt7603: fix handling of fixed rate packets
5ee0523 mt7603: fix tx status rate reporting for fixed-rate packets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 6 Nov 2018 21:24:03 +0000 (22:24 +0100)]
ramips: add missing DTS frequency limit for the 5 GHz radio on Archer C20i
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Koen Vandeputte [Tue, 6 Nov 2018 15:33:09 +0000 (16:33 +0100)]
valgrind: bump to 4.14.0
Release notes can be found here:
http://www.valgrind.org/docs/manual/dist.news.html
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Tue, 6 Nov 2018 14:10:17 +0000 (15:10 +0100)]
ramips: fix image generation for mt76x8
Buildbot fails to generate images for targets also generating a
Sercomm binary with following error:
Opening file: /mnt/ramdisk/koen/firmware/builds/owrt_mt76x8/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-netgear_r6120-squashfs-factory.img.rootfs.zip
Filesize:
3648606 .
mksercommfw: malloc.c:2427: sysmalloc: Assertion `(old_top == initial_top (av) && old_size == 0) || ((unsigned long) (old_size) >= MINSIZE && prev_inuse (old_top) && ((unsigned long) old_end & (pagesize - 1)) == 0)' failed.
Makefile:287: recipe for target '/mnt/ramdisk/koen/firmware/builds/owrt_mt76x8/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/tmp/openwrt-ramips-mt76x8-netgear_r6120-squashfs-factory.img' failed
Debugging using valgrind shows stack corruption due to a buffer overflow.
The author of the generator assumes the filename ends with "root",
while it should be "rootfs".
Fix this by accounting for the 2 missing characters which solves the build issues.
More work is required to cleanup this source, which will be done later on.
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Mon, 5 Nov 2018 16:41:00 +0000 (17:41 +0100)]
imx6: fix DMA transaction errors
Following errors were seen in the past on imx6 when using serial:
[ 22.617622] imx-uart
2020000.serial: DMA transaction error.
[ 22.623228] imx-uart
2020000.serial: DMA transaction error.
[ 22.628826] imx-uart
2020000.serial: DMA transaction error.
[ 22.648951] imx-uart
2020000.serial: DMA transaction error.
[ 22.654558] imx-uart
2020000.serial: DMA transaction error.
[ 22.660156] imx-uart
2020000.serial: DMA transaction error.
Which is the reason why DMA for the serial ports
got disabled in commits:
efb362cd93b0 ("imx6: disable dma on uart")
3b4241071dd4 ("imx6: disable UART dma")
As indicated on mailinglist discussion, the cause seems to be
the usage of very old SDMA firmware which is present in the soc:
[ 0.624302] imx-sdma
20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
[ 0.624318] imx-sdma
20ec000.sdma: Falling back to user helper
[ 64.531607] imx-sdma
20ec000.sdma: external firmware not found, using ROM firmware
This patch adds the new firmware binary. (2196 bytes)
It is required to embed the binary into the kernel image, as it
gets loaded very early in the boot process where the rootfs is not
available yet:
[ 0.622966] imx-sdma
20ec000.sdma: loaded firmware 3.3
Extended testing shows that the DMA errors are not seen anymore
when using this newer firmware version.
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Mon, 5 Nov 2018 10:31:12 +0000 (11:31 +0100)]
ath9k: fix dynack in IBSS mode
Currently, dynack was only tested upstream using AP/STA mode.
Testing it on IBSS, showed that late-ack detection was broken.
This is caused due to dynack using Association Request/Response
frames for late-ack detection, which IBSS does not use.
Also allowing Authentication frames here solves this.
A second issue also got fixed, which was also seen AP/STA mode:
When a station was added, the estimated value would be exponentially averaged
using 0 as a starting point.
This means that on larger distances, the ack timeout was still not high
enough before synchronizing would run out of late-ack's for estimation.
Fix this by using the initial estimated value as a baseline
and only start averaging in the following estimation rounds.
Test setup:
- 2x identical devices: RB912UAG-5HPnD + 19dB sector
- IBSS
- 2x2 802.11an (ar9340), HT20, long GI
- RSSI's -70 / -71
- Real distance: 23910 meter
Results (60s iperf runs):
Fixed coverage class 54 (up to 24300m):
* 21.5 Mbits/sec
Dynack:
* 28.9 Mbits/sec
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Mon, 5 Nov 2018 11:53:55 +0000 (12:53 +0100)]
ar71xx: disable some tiny targets with kernel 4.14
The bump to kernel 4.14 caused a massive increase in kernel size.
For most targets, switching them to dynamic partitioning allowed
to cope with this.
On some targets, the kernel partition is located behind the rootfs,
which disallows switching to dynamic partitioning as the boot location
would be altered, requiring a u-boot change.
Also within the tiny section, which disables kernel symbols etc
to decrease the image size, the partition size is still too small.
Disable these targets for now, fixing image generation:
- Buffalo BHR-4GRV2
- Zbtlink ZBT-WE1526
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Mon, 5 Nov 2018 10:22:43 +0000 (11:22 +0100)]
kernel: bump 4.14 to 4.14.79
Refreshed all patches.
Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Hans Dedecker [Mon, 5 Nov 2018 13:19:33 +0000 (14:19 +0100)]
glibc: update to latest 2.27 commit (BZ#23709,BZ#23822)
d8eee5ef55 x86: Fix Haswell CPU string flags (BZ#23709)
5cd5309d91 i64: fix missing exp2f, log2f and powf symbols in libm.a [BZ #23822]
1759ea197b conform: XFAIL siginfo_t si_band test on sparc64
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hannu Nyman [Sun, 4 Nov 2018 15:42:09 +0000 (17:42 +0200)]
tools/bison: update to version 3.2
Update bison to version 3.2
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
David Bauer [Sun, 4 Nov 2018 15:01:39 +0000 (16:01 +0100)]
ipq40xx: fix NBG6617 LED mapping
The NBG6617's LEDs are wrongly identified in the 01_leds boardinit
script (board instead of boardname), resulting in referencing
non-existent LEDs in UCI.
Signed-off-by: David Bauer <mail@david-bauer.net>
Daniel Golle [Sun, 4 Nov 2018 17:26:28 +0000 (18:26 +0100)]
oxnas: add console=ttyS0,115200 argument to bootargs
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 4 Nov 2018 17:24:57 +0000 (18:24 +0100)]
oxnas: enable image metadata by setting SUPPORTED_DEVICES
For each board, set the legacy name as well as the new based on the
compatible-string from devicetree.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 4 Nov 2018 17:23:51 +0000 (18:23 +0100)]
oxnas: remove stray kernel config symbols
CONFIG_CRYPTO_* shouldn't be set by the target
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 4 Nov 2018 17:22:33 +0000 (18:22 +0100)]
oxnas: switch to generic board detect
remove /lib/oxnas.sh platform-specific board-detection and use
generic which is based on device-tree compatible node instead.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Alexander Couzens [Sat, 3 Nov 2018 00:22:59 +0000 (01:22 +0100)]
iperf: allow non-ipv6 builds
Add configure argument --disable-ipv6 when ipv6 is deselected.
Add fix-non-ipv6-builds.patch as long there is no new upstream
release.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Martin Weinelt [Fri, 2 Nov 2018 19:52:01 +0000 (20:52 +0100)]
ramips: fix leds on GL.iNet GL-MT300N-V2
The WAN LED now shows the link state. It's color is green,
not blue.
Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
Hans Dedecker [Fri, 2 Nov 2018 12:05:13 +0000 (13:05 +0100)]
curl: noop commit to refer CVEs fixed in 7.62.0
When bumping Curl to 7.62.0 in commit
278e4eba09 I did not include the fixed
CVEs in the commit message; this commit fixes this.
The following CVEs were fixed in 7.62.0 :
CVE-2018-16839
CVE-2018-16840
CVE-2018-16842
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Christian Lamparter [Mon, 22 Oct 2018 21:47:56 +0000 (23:47 +0200)]
ipq-wifi: drop custom board-2.bins
The BDFs for all boards were upstreamed to the ath10k-firmware
repository and linux-firmware.git.
We switched to the upstream board-2.bin, hence the files can be removed
here.
Keep the ipq-wifi package in case new boards are added. It might take
some time till board-2.bins send upstream are merged.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Christian Lamparter [Mon, 22 Oct 2018 21:47:55 +0000 (23:47 +0200)]
ipq40xx: nbg6617: switch to upstream boardfile variant
The NBG6617's boardfile was merged and this device can
now switch to the upstream ath10k board-2.bin.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Christian Lamparter [Mon, 22 Oct 2018 21:47:54 +0000 (23:47 +0200)]
ath10k-firmware: update board-2.bin for community firmwares
This patch updates the board-2.bin for the default
IPQ4019, QCA9984 and QCA9888 ath10k-firmware-xyz-ct
and -ct-htt firmwares.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Christian Lamparter [Mon, 22 Oct 2018 21:47:53 +0000 (23:47 +0200)]
ipq40xx: rt-ac58u: replace ubi auto load hack
This patch replaces the custom autoload quirk of the
RT-AC58U with a bootargs-append overwrite.
The vendor's u-boot doesn't leave the bootargs / cmdline alone,
so the it can't be overwritten in any other way right now...
And of course, this will be a lot of fun to deal with once
the device switches to the new spi-nand subsystem.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Rosen Penev [Sun, 28 Oct 2018 01:53:52 +0000 (18:53 -0700)]
kernel: Remove dependencies on old kernels
Kernels 4.1 and 4.4 are not part of the tree anymore.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 31 Oct 2018 23:55:14 +0000 (16:55 -0700)]
tools/patch: Add fedora patch for crashing git style patches
https://lists.gnu.org/archive/html/bug-patch/2018-10/msg00000.html
I assume a CVE number will be assigned soon.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Daniel Engberg [Fri, 19 Oct 2018 21:05:44 +0000 (23:05 +0200)]
libconfig: Fix tarball filename (and URL)
v$(PKG_VERSION).tar.gz is a bad idea and will clash for obvious reasons.
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Hauke Mehrtens [Thu, 1 Nov 2018 13:05:59 +0000 (14:05 +0100)]
scripts: update config.guess and config.sub
This updates these two files to commit
2fa97a8a0ed3 ("config.guess
(amd64:CYGWIN*:*:*, x86_64:CYGWIN*:*:*): Set master") which is the
current master of
https://git.savannah.gnu.org/gitweb/?p=config.git;a=summary
This contains updates for multiple architectures and will unbreak the
build on the x32 ABI.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Thorsten Glaser [Mon, 22 Oct 2018 19:00:57 +0000 (21:00 +0200)]
build: fix libressl build on x32 (amd64ilp32) host
disable use of assembly code since x32 gets misdetected as amd64
Signed-off-by: Thorsten Glaser <tg@mirbsd.org>
Michael Heimpold [Sun, 28 Oct 2018 14:26:08 +0000 (15:26 +0100)]
uboot-mxs: bump to v2018.09
Also update the U-Boot BSP patch for I2SE Duckbill devices
and remove upstreamed patch for LibreSSL support.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Hannu Nyman [Sun, 28 Oct 2018 14:49:28 +0000 (16:49 +0200)]
tools/ccache: update to 3.5
Update ccache to 3.5
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Kabuli Chana [Mon, 29 Oct 2018 16:58:07 +0000 (10:58 -0600)]
mwlwifi: update to version 10.3.8.0-
20181029
compile / test target mvebu / mamba
Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
Thomas Fuzeau [Tue, 30 Oct 2018 11:06:22 +0000 (12:06 +0100)]
kernel: add kmod-usb-serial-mos7840
Enable build of kernel module for mos7840 usb-serial devices.
Signed-off-by: Thomas Fuzeau <tfuzeau@loocla.com>
Hans Dedecker [Wed, 31 Oct 2018 21:58:54 +0000 (22:58 +0100)]
curl: bump to 7.62.0
Refresh patches, for changes in version 7.62.0 see https://curl.haxx.se/changes.html#7_62_0
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Matthias Schiffer [Tue, 30 Oct 2018 19:38:34 +0000 (20:38 +0100)]
openssl: enable OPENSSL_WITH_DEPRECATED when OpenSSL is built as a build dep
Some package (e.g. libunbound) depend on OPENSSL_WITH_DEPRECATED. In some
situations it may happen that libunbound and openssl are only pulled in as
build dependencies, but are not enabled in .config.
In such cases, the defaults of symbols like OPENSSL_WITH_DEPRECATED are
ignored (as the whole symbol depends on PACKAGE_libopenssl), and config
symbol dependencies of libunbound aren't effective either (as libunbound
is not actually enabled).
This commit works around the issue by introducing a hidden negated symbol
OPENSSL_NO_DEPRECATED, which is always disabled when PACKAGE_libopenssl is
disabled, and ensures that OpenSSL is built with deprecated APIs in this
case. A user can still manage to break the build by explicitly enabling
libopenssl and disabling OPENSSL_WITH_DEPRECATED; the interaction between
build dependencies and config symbols will require further discussion.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Kevin Darbyshire-Bryant [Thu, 11 Oct 2018 08:46:42 +0000 (09:46 +0100)]
dnsmasq: tighten config file permissions
Install following as config files (600) perms instead of as data (644)
/usr/share/dnsmasq/dhcpbogushostname.conf
/usr/share/dnsmasq/trust-anchors.conf
/usr/share/dnsmasq/rfc6761.conf
/etc/hotplug.d/ntp/25-dnsmasqsec
/etc/config/dhcp
/etc/dnsmasq.conf
dnsmasq reads relevant config files before dropping root privilege and
running as dnsmasq:dnsmasq
ntpd runs as root so the hotplug script is still accessible
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Koen Vandeputte [Mon, 29 Oct 2018 14:48:10 +0000 (15:48 +0100)]
ar71xx: expand kernel size for ubnt targets
Kernel 4.14 is pretty large causing a build error as the partition is too small.
Expand the kernel partition a bit to make it fit.
* ubnt-uap-pro
* ubnt-unifi-outdoor-plus
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Mon, 29 Oct 2018 14:44:54 +0000 (15:44 +0100)]
ar71xx: disable ap91-5g due to kernel size
This target causes a build failure as the kernel image does not fit
into the kernel partition.
As the kernel is located behind the rootfs, it cannot be enlarged
as the boot entry location would get altered.
Disable this target for now.
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Wed, 24 Oct 2018 12:44:30 +0000 (14:44 +0200)]
ar71xx: fix sysupgrade generation for some targets
These targets are already defined as having a dynamic partition
but the safeloader was not adapted for them.
This causes a build warning for the sysupgrade image being too big.
Targets:
- c58-v1
- c60-v1
- c60-v2
- TL-WR1043 v5
- TL-WR902AC v1
- TL-WR942N V1
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Wed, 24 Oct 2018 12:49:07 +0000 (14:49 +0200)]
ar71xx: switch more targets to dynamic partitioning
Targets:
- TP-LINK ER355
- TP-LINK C25 V1
- TP-LINK C59 V1
- TP-LINK C7 V4
- TP-LINK C7 V5
Fixes build issues seen due to the kernel being too big
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Radek Dostál [Mon, 22 Oct 2018 20:34:17 +0000 (22:34 +0200)]
ar71xx: switch TP-Link RE450 v1 to dynamic partitioning
As mentioned in commit
5f24933 recent changes on ar71xx (switch to 4.14,
memory compaction, ...) cause an increase in kernel size, making it too
big for RE450.
RE450 images were not build due to the following error message:
os-image partition too big (more than
1572864 bytes): Success
Tested on RE450, device boots and was used to send this patch.
Reported-by: Enrico Mioso <mrkiko.rs@gmail.com>
Suggested-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Radek Dostál <rd@radekdostal.com>
[rewrote commit msg keeping it tight + fixed SoB lines]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
David Bauer [Thu, 18 Oct 2018 18:43:42 +0000 (20:43 +0200)]
ar71xx: move OCEDO Koala to generic and use dynamic partitioning
This changes the OCEDO Koala flash-layout to a unified firmware
partition, thus making the ar71xx-generic kernel fit in flash.
Compile and runtested on OCEDO Koala.
Signed-off-by: David Bauer <mail@david-bauer.net>
[small title reword]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Mathias Kresin [Sun, 28 Oct 2018 10:03:49 +0000 (11:03 +0100)]
ath79: fix PQI Air Pen support
Use the correct dts filename. It has to be <soc>_<manufacturer>_<device>.
Signed-off-by: Mathias Kresin <dev@kresin.me>
YuheiOKAWA [Thu, 4 Oct 2018 16:08:51 +0000 (01:08 +0900)]
ath79: add support for PQI Air Pen
SoC: AR9330 (or AR9331 revision?)
Ethernet x1, Wireless 2.4G, uSD card slot x1.
USB Power, include Li-Po Battery.
Flash 8MiB. (factory is dual image)
1. write image is use half 4MiB size from factory.
write initramfs image to mtd6 and mtd7.
2. change next boot setting. next is mtd6 boot.
echo -ne "\x01" | dd of=/dev/mtdblock8 conv=notrunc bs=1 count=1 seek=0
3. rewrite sysupgrade image.
change next boot setting. next is mtd4.
echo -ne "\x00" | dd of=/dev/mtdblock8 conv=notrunc bs=1 count=1 seek=0
OEM mtd.
dev: size erasesize name
mtd0:
00040000 00010000 "u-boot"
mtd1:
00010000 00010000 "u-boot-env"
mtd2:
00010000 00010000 "ART"
mtd3:
00010000 00010000 "NVRAM"
mtd4:
00140000 00010000 "uImage"
mtd5:
00280000 00010000 "rootfs"
mtd6:
00140000 00010000 "uImage2"
mtd7:
00280000 00010000 "rootfs2"
mtd8:
00010000 00010000 "CONF"
Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
Roger Pueyo Centelles [Wed, 19 Sep 2018 12:17:35 +0000 (14:17 +0200)]
ath79: Add support for Ubiquiti LiteAP ac (LAP-120)
This commit adds support for the Ubiquiti LiteAP ac (LAP-120), an outdoor
5 GHz AC access point with an integrated 120° 16 dBi antenna. The device
was previously known as LiteBeam AP ac but was later rebranded.
CPU: Atheros AR9342 SoC
RAM: 64 MB DDR2
Flash: 16 MB NOR SPI
Ports: 1 GbE port (PoE in)
WLAN: 5 GHz QCA899X (PCI)
The integrated QCA899X is a Ubiquiti branded part with modified vendor
and product id (0777:11ac9). It is very similar to the NanoStation loco
AC, except for the 2.4 GHz management radio (missing here).
Installation procedure is the same as the NanoStation [loco] AC:
1. Connect to serial header on device
2. Power on device and enter uboot console
3. Set up tftp server serving an openwrt initramfs build
4. Load initramfs build using the command tftpboot in the uboot cli
5. Boot the loaded image using the command bootm
6. Copy squashfs openwrt sysupgrade build to the booted device
7. Use mtd to write sysupgrade to partition "firmware"
8. Reboot and enjoy
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Felix Fietkau [Sat, 27 Oct 2018 15:54:36 +0000 (17:54 +0200)]
mt76: update to the latest version
fdc63f1 mt76: fix regression in tx status handling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Engberg [Wed, 10 Oct 2018 11:04:31 +0000 (13:04 +0200)]
mt76: Fix dependencies for PCI support
USB support doesn't necessarily mean that there's
PCI support available so move that to the drivers
which requires PCI support. This applies to the
sunxi platform for instance.
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix mt76x0e]
Felix Fietkau [Thu, 25 Oct 2018 20:48:49 +0000 (22:48 +0200)]
mt76: update to the latest version
0b8b15f mt7603: use common mmio mcu struct
d612e2e mt76: mt76x02: skip station tx status for non-sta wcid entries
d89d84b mt76: mt76x02: only override control->sta on sw-encrypted tx
9d59d2a mt76: add support for reporting tx status with skb
ed17ba2 mt7603: use common tx status handling code
14b6c59 mt76x0: use band parameter for LC calibration
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Philip Prindeville [Sun, 21 Oct 2018 02:23:12 +0000 (20:23 -0600)]
grub2: fix regression caused by binutils-2.31.1
grub-efi no longer works:
grub-mkimage: error: relocation 0x4 is not implemented yet.
See:
http://git.savannah.gnu.org/cgit/grub.git/commit/util?id=
842c390469e2c2e10b5aa36700324cd3bde25875
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>i [PKG_RELEASE increase]
projects / openwrt / staging / zorun.git / log