openwrt/openwrt.git
12 years agomac80211: use ieee80211_free_txskb in a few more places to prevent skb leaks
Felix Fietkau [Sun, 7 Oct 2012 21:35:29 +0000 (21:35 +0000)]
mac80211: use ieee80211_free_txskb in a few more places to prevent skb leaks

SVN-Revision: 33635

12 years agomove a few unmaintained packages from trunk to /packages
Felix Fietkau [Sun, 7 Oct 2012 12:50:15 +0000 (12:50 +0000)]
move a few unmaintained packages from trunk to /packages

SVN-Revision: 33634

12 years agobuild: create pkginfo dir earlier to avoid build breakage
Felix Fietkau [Sat, 6 Oct 2012 22:42:57 +0000 (22:42 +0000)]
build: create pkginfo dir earlier to avoid build breakage

SVN-Revision: 33633

12 years agobuild: rework the package/install step - collect package install lists during package...
Felix Fietkau [Sat, 6 Oct 2012 16:01:06 +0000 (16:01 +0000)]
build: rework the package/install step - collect package install lists during package/compile, then install all packages at once

SVN-Revision: 33631

12 years agohostapd: fix parallel build issues and spurious object file rebuilds
Felix Fietkau [Sat, 6 Oct 2012 16:01:02 +0000 (16:01 +0000)]
hostapd: fix parallel build issues and spurious object file rebuilds

SVN-Revision: 33630

12 years agoath9k: fix invalid register access on single-stream ar93xx devices
Felix Fietkau [Fri, 5 Oct 2012 16:15:55 +0000 (16:15 +0000)]
ath9k: fix invalid register access on single-stream ar93xx devices

SVN-Revision: 33628

12 years agoacx-mac80211: adapt interface changes in mac80211
Hauke Mehrtens [Thu, 4 Oct 2012 21:39:22 +0000 (21:39 +0000)]
acx-mac80211: adapt interface changes in mac80211

The prototype of conf_tx and tx in struct ieee80211_ops changed some
time ago and was not compatible with the prototype assumes by
acs-mac80211.
At least I do not see any compile warnings about this any more.

SVN-Revision: 33624

12 years agoar71xx: build image for the TL-WR841N/ND v8
Gabor Juhos [Thu, 4 Oct 2012 20:16:06 +0000 (20:16 +0000)]
ar71xx: build image for the TL-WR841N/ND v8

SVN-Revision: 33623

12 years agoar71xx: user-space support for TL-WR841N/ND v8
Gabor Juhos [Thu, 4 Oct 2012 20:16:05 +0000 (20:16 +0000)]
ar71xx: user-space support for TL-WR841N/ND v8

SVN-Revision: 33622

12 years agoar71xx: add support for the TL-WR841N/ND v8 board
Gabor Juhos [Thu, 4 Oct 2012 20:16:03 +0000 (20:16 +0000)]
ar71xx: add support for the TL-WR841N/ND v8 board

SVN-Revision: 33621

12 years agobcma: do not initialize deactivated PCIe cores
Hauke Mehrtens [Thu, 4 Oct 2012 15:45:54 +0000 (15:45 +0000)]
bcma: do not initialize deactivated PCIe cores

Before it was tried to initialize the deactivated PCIe core in client
mode, but this causes the SoC to hang. Just do not initialize it at all
and ignore the core it is not working and nothing is connected to it
when the specific bit is set in the boardflags.

SVN-Revision: 33620

12 years agouse memcmp in mem size detection as suggested by blogic
Hauke Mehrtens [Thu, 4 Oct 2012 15:42:12 +0000 (15:42 +0000)]
use memcmp in mem size detection as suggested by blogic

SVN-Revision: 33619

12 years agofix typo in 05_set_ether_mac_rdc preinit script (#11166)
Florian Fainelli [Thu, 4 Oct 2012 12:36:50 +0000 (12:36 +0000)]
fix typo in 05_set_ether_mac_rdc preinit script (#11166)

SVN-Revision: 33618

12 years agobroadcom-wl: fix build after IRQF_SAMPLE_RANDOM flag removal (#12248)
Florian Fainelli [Thu, 4 Oct 2012 12:36:45 +0000 (12:36 +0000)]
broadcom-wl: fix build after IRQF_SAMPLE_RANDOM flag removal (#12248)

SVN-Revision: 33617

12 years agomac80211/rt2x00: fix lna assignment typo in Rt3352 which went upstream
Gabor Juhos [Thu, 4 Oct 2012 06:34:14 +0000 (06:34 +0000)]
mac80211/rt2x00: fix lna assignment typo in Rt3352 which went upstream

Reviewing what went into wireless-testing I found a quite nasty mistake,
probably a result of copy&past'ing from the lines below in rt2800lib.c.
This adds another patch to fix that.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33616

12 years agomac80211/rt2x00: sync Rt3352 support
Gabor Juhos [Thu, 4 Oct 2012 06:34:12 +0000 (06:34 +0000)]
mac80211/rt2x00: sync Rt3352 support

The original patch was accepted into linux-next in a slightly modified form.
In order to provide integrity to follow-up patches, replace the patch in OpenWrt
with the (semantically identical) now upstream patch.
(commit 03839951515b0ea2b21d649b1fe7b63f9817d0c8 in wireless-testing)

Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33615

12 years agoramips: add image for ALL0256N-8M
Gabor Juhos [Thu, 4 Oct 2012 06:34:09 +0000 (06:34 +0000)]
ramips: add image for ALL0256N-8M

The new version of the ALL0256N now got 8MB SPI NOR flash instead of 4MB.
In order to expose the whole amount of flash, add another image which contains
the corresponding GENERIC_8M mtdparts.

[juhosg: change suffix from '8m' to '8M']

Patch by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 33614

12 years agomac80211: allow scans in access point mode (for site survey)
Felix Fietkau [Wed, 3 Oct 2012 19:13:20 +0000 (19:13 +0000)]
mac80211: allow scans in access point mode (for site survey)

SVN-Revision: 33613

12 years agouboot-envtools: remove MENU, it is unused since r33265
Luka Perkov [Wed, 3 Oct 2012 18:57:51 +0000 (18:57 +0000)]
uboot-envtools: remove MENU, it is unused since r33265

SVN-Revision: 33612

12 years agoath9k: use ieee80211_free_txskb, might fix hostapd stability issues
Felix Fietkau [Wed, 3 Oct 2012 18:57:31 +0000 (18:57 +0000)]
ath9k: use ieee80211_free_txskb, might fix hostapd stability issues

SVN-Revision: 33611

12 years agomac80211: fix regulatory tx power initialization
Felix Fietkau [Wed, 3 Oct 2012 18:57:25 +0000 (18:57 +0000)]
mac80211: fix regulatory tx power initialization

SVN-Revision: 33610

12 years agoadd Default and Gumstix PXA profiles
Florian Fainelli [Wed, 3 Oct 2012 16:15:05 +0000 (16:15 +0000)]
add Default and Gumstix PXA profiles

Gumstix builds a fake flash image for usage in qemu

SVN-Revision: 33609

12 years agoadd uboot-pxa for Gumstix boards
Florian Fainelli [Wed, 3 Oct 2012 16:14:21 +0000 (16:14 +0000)]
add uboot-pxa for Gumstix boards

SVN-Revision: 33608

12 years agoadvertise jffs2 feature
Florian Fainelli [Wed, 3 Oct 2012 16:12:57 +0000 (16:12 +0000)]
advertise jffs2 feature

SVN-Revision: 33607

12 years agoremove broken flag
Florian Fainelli [Wed, 3 Oct 2012 16:12:39 +0000 (16:12 +0000)]
remove broken flag

SVN-Revision: 33606

12 years agofix build with latest gpiolib changes
Florian Fainelli [Wed, 3 Oct 2012 16:12:03 +0000 (16:12 +0000)]
fix build with latest gpiolib changes

SVN-Revision: 33605

12 years agomore convertions to {read,write}_relaxed I/O accessors
Florian Fainelli [Wed, 3 Oct 2012 16:10:47 +0000 (16:10 +0000)]
more convertions to {read,write}_relaxed I/O accessors

SVN-Revision: 33604

12 years agocns3xxx: add missing kernel config symbol
Felix Fietkau [Sun, 30 Sep 2012 15:31:34 +0000 (15:31 +0000)]
cns3xxx: add missing kernel config symbol

SVN-Revision: 33603

12 years agorefresh patches
Hauke Mehrtens [Sun, 30 Sep 2012 11:45:53 +0000 (11:45 +0000)]
refresh patches

SVN-Revision: 33602

12 years agobcma: use fallback sprom if sprom on card was not valid
Hauke Mehrtens [Sun, 30 Sep 2012 11:45:31 +0000 (11:45 +0000)]
bcma: use fallback sprom if sprom on card was not valid

Sometimes the PCIe card indicates that it has a sprom somewhere and we
are able to read the memory region, but it is empty and not valid. In
these cases we should try to use the fallback sprom as a last chance.

SVN-Revision: 33601

12 years agobcma: initialize sprom earlier
Hauke Mehrtens [Sun, 30 Sep 2012 11:44:44 +0000 (11:44 +0000)]
bcma: initialize sprom earlier

The chip common and the PCIe code are accessing the sprom struct which
is not filled when these cores are initialized. Fix this by adding an
early initialize and fill the sprom struct before accessing it in other
code.

SVN-Revision: 33600

12 years agorun make kernel_oldconfig
Hauke Mehrtens [Sun, 30 Sep 2012 11:44:04 +0000 (11:44 +0000)]
run make kernel_oldconfig

SVN-Revision: 33599

12 years agoignore the last page on bcma based SoCs
Hauke Mehrtens [Sun, 30 Sep 2012 11:43:40 +0000 (11:43 +0000)]
ignore the last page on bcma based SoCs

SVN-Revision: 33598

12 years agoFix reading sprom from nvram without a prefix
Hauke Mehrtens [Sun, 30 Sep 2012 11:43:13 +0000 (11:43 +0000)]
Fix reading sprom from nvram without a prefix

The bcma based SoCs with a ieee80211 core on the SoC and an other
connected via PCIe or USB store the sprom for the SoC with a sb/1/
prefix. The SoC with just one wifi core do not use prefixes. The
BCM4706 do not use a prefix for the SoC part at all, because the prefix
is the path to the ieee80211 core and there is non on the BCM4706.

SVN-Revision: 33597

12 years agoimprove the check for the memory size
Hauke Mehrtens [Sun, 30 Sep 2012 11:42:16 +0000 (11:42 +0000)]
improve the check for the memory size

This will hopefully fix bug #9360 and #9097 in trunk.

SVN-Revision: 33596

12 years agonetifd: update to latest version, should fix clearing ipv6 routes on interface bringu...
Felix Fietkau [Fri, 28 Sep 2012 23:12:34 +0000 (23:12 +0000)]
netifd: update to latest version, should fix clearing ipv6 routes on interface bringup (#12184)

SVN-Revision: 33595

12 years agoremove dependency for pkill
John Crispin [Fri, 28 Sep 2012 22:37:04 +0000 (22:37 +0000)]
remove dependency for pkill

SVN-Revision: 33594

12 years agodont explicitly select wireless-tools. rely on the drivers that need them to have...
John Crispin [Fri, 28 Sep 2012 21:54:31 +0000 (21:54 +0000)]
dont explicitly select wireless-tools. rely on the drivers that need them to have the right dependency

SVN-Revision: 33593

12 years agoadd support for adm6996 phy
John Crispin [Fri, 28 Sep 2012 21:38:02 +0000 (21:38 +0000)]
add support for adm6996 phy

SVN-Revision: 33592

12 years agotapi was not registeredproperly for most arcadyan boards
John Crispin [Fri, 28 Sep 2012 20:57:06 +0000 (20:57 +0000)]
tapi was not registeredproperly for most arcadyan boards

SVN-Revision: 33591

12 years agoAR71xx/9xxx based routers are the most common these days, select that as the default...
Imre Kaloz [Fri, 28 Sep 2012 20:54:35 +0000 (20:54 +0000)]
AR71xx/9xxx based routers are the most common these days, select that as the default target

SVN-Revision: 33590

12 years agomac80211: add uci support for configuring antenna gain
Felix Fietkau [Fri, 28 Sep 2012 18:29:22 +0000 (18:29 +0000)]
mac80211: add uci support for configuring antenna gain

SVN-Revision: 33587

12 years agoiw: update to 3.6 and add support for configuring antenna gain
Felix Fietkau [Fri, 28 Sep 2012 18:29:16 +0000 (18:29 +0000)]
iw: update to 3.6 and add support for configuring antenna gain

SVN-Revision: 33586

12 years agomac80211: fix antenna gain and add support for user-defined antenna gain configuration
Felix Fietkau [Fri, 28 Sep 2012 18:29:09 +0000 (18:29 +0000)]
mac80211: fix antenna gain and add support for user-defined antenna gain configuration

SVN-Revision: 33585

12 years agomac80211: rework the current tx power display patch
Felix Fietkau [Fri, 28 Sep 2012 18:29:02 +0000 (18:29 +0000)]
mac80211: rework the current tx power display patch

SVN-Revision: 33584

12 years agomac80211: fix beacon IE power constraint handling
Felix Fietkau [Fri, 28 Sep 2012 18:28:54 +0000 (18:28 +0000)]
mac80211: fix beacon IE power constraint handling

SVN-Revision: 33583

12 years agobuild: turn on package parallel builds by default and fix descriptions.
Felix Fietkau [Fri, 28 Sep 2012 18:09:41 +0000 (18:09 +0000)]
build: turn on package parallel builds by default and fix descriptions.

By default, this is only used when building with make -j.

SVN-Revision: 33582

12 years agoAdd FIQ support for cns3xxx
Imre Kaloz [Fri, 28 Sep 2012 17:35:35 +0000 (17:35 +0000)]
Add FIQ support for cns3xxx

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33581

12 years agoUpdate board support for Gateworks Laguna Product family
Imre Kaloz [Fri, 28 Sep 2012 17:34:18 +0000 (17:34 +0000)]
Update board support for Gateworks Laguna Product family

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33580

12 years agoUSB iso mode fixes
Imre Kaloz [Fri, 28 Sep 2012 17:31:22 +0000 (17:31 +0000)]
USB iso mode fixes

Resolves an issue where isochronouse USB would cause the driver to hang as
well as scheduling issues.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33579

12 years agocmake: update to version 2.8.9
Felix Fietkau [Fri, 28 Sep 2012 00:07:28 +0000 (00:07 +0000)]
cmake: update to version 2.8.9

SVN-Revision: 33576

12 years agoar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac
Gabor Juhos [Thu, 27 Sep 2012 20:05:42 +0000 (20:05 +0000)]
ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac

SVN-Revision: 33575

12 years agogeneric: enable CONFIG_USB_EHCI_TT_NEWSCHED
Gabor Juhos [Thu, 27 Sep 2012 20:05:39 +0000 (20:05 +0000)]
generic: enable CONFIG_USB_EHCI_TT_NEWSCHED

This feature was experimental in old kernels but
that flag has been removed in 2.6.36. Additionally,
the option is enabled by default since then.

See: http://www.spinics.net/lists/linux-usb/msg31993.html

SVN-Revision: 33574

12 years ago6to4: properly setup Base6to4Interface (#12251)
Jo-Philipp Wich [Thu, 27 Sep 2012 18:30:07 +0000 (18:30 +0000)]
6to4: properly setup Base6to4Interface (#12251)

SVN-Revision: 33573

12 years agoath5k: add a spur mitigation fix
Felix Fietkau [Thu, 27 Sep 2012 11:12:13 +0000 (11:12 +0000)]
ath5k: add a spur mitigation fix

SVN-Revision: 33572

12 years agoramips: add memory detection code for RT5350
Gabor Juhos [Thu, 27 Sep 2012 10:18:15 +0000 (10:18 +0000)]
ramips: add memory detection code for RT5350

SVN-Revision: 33571

12 years agoramips: allow to use custom code for memory size detection
Gabor Juhos [Thu, 27 Sep 2012 10:18:14 +0000 (10:18 +0000)]
ramips: allow to use custom code for memory size detection

SVN-Revision: 33570

12 years agoinclude sys/resource.h in arch/um/os-Linux/start_up.c (#12155)
Florian Fainelli [Thu, 27 Sep 2012 09:21:01 +0000 (09:21 +0000)]
include sys/resource.h in arch/um/os-Linux/start_up.c (#12155)

Required for recent (e)glibc systems

SVN-Revision: 33569

12 years agofix ncores for single-core systems.
Imre Kaloz [Thu, 27 Sep 2012 08:07:17 +0000 (08:07 +0000)]
fix ncores for single-core systems.

For cns3xxx SCU_CONFIGURATION always shows multipe cores but SCU_CPU_STATUS
shows which ones are active.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33566

12 years agoadd i2c retries
Imre Kaloz [Thu, 27 Sep 2012 08:06:13 +0000 (08:06 +0000)]
add i2c retries

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33565

12 years agofix pcie abort handling
Imre Kaloz [Thu, 27 Sep 2012 08:05:19 +0000 (08:05 +0000)]
fix pcie abort handling

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 33564

12 years agoremove kmod-spi-bitbang
Florian Fainelli [Wed, 26 Sep 2012 20:11:37 +0000 (20:11 +0000)]
remove kmod-spi-bitbang

This is no longer a dependency of kmod-spi-bcm63xx

SVN-Revision: 33562

12 years agogeneric: add upstream commit id to codel patches and refresh those
Gabor Juhos [Wed, 26 Sep 2012 14:17:17 +0000 (14:17 +0000)]
generic: add upstream commit id to codel patches and refresh those

SVN-Revision: 33560

12 years agobackport the upstream entropy changes (#11951)
Florian Fainelli [Wed, 26 Sep 2012 12:54:01 +0000 (12:54 +0000)]
backport the upstream entropy changes (#11951)

SVN-Revision: 33559

12 years agoget rid of the IRQF_SAMPLE_RANDOM flag
Florian Fainelli [Wed, 26 Sep 2012 12:53:58 +0000 (12:53 +0000)]
get rid of the IRQF_SAMPLE_RANDOM flag

SVN-Revision: 33558

12 years agomac80211: refresh patches
Florian Fainelli [Wed, 26 Sep 2012 12:53:54 +0000 (12:53 +0000)]
mac80211: refresh patches

SVN-Revision: 33557

12 years agoadd wmbus-repeater to the dLAN USB Extender profile
Florian Fainelli [Tue, 25 Sep 2012 20:56:50 +0000 (20:56 +0000)]
add wmbus-repeater to the dLAN USB Extender profile

SVN-Revision: 33556

12 years agoenable multicast and advanced ip routers configs
Florian Fainelli [Tue, 25 Sep 2012 20:53:34 +0000 (20:53 +0000)]
enable multicast and advanced ip routers configs

SVN-Revision: 33555

12 years agoadd kmod-usb-serial-ftdi to the dLAN USB Extender profile
Florian Fainelli [Tue, 25 Sep 2012 20:50:20 +0000 (20:50 +0000)]
add kmod-usb-serial-ftdi to the dLAN USB Extender profile

SVN-Revision: 33554

12 years agomac80211: avoid sending useless delBA frames on client disassoc
Felix Fietkau [Tue, 25 Sep 2012 16:20:30 +0000 (16:20 +0000)]
mac80211: avoid sending useless delBA frames on client disassoc

SVN-Revision: 33551

12 years agoath9k: fix rx filtering for older chipsets, helps with multi-bssid and mesh mode
Felix Fietkau [Tue, 25 Sep 2012 16:17:18 +0000 (16:17 +0000)]
ath9k: fix rx filtering for older chipsets, helps with multi-bssid and mesh mode

SVN-Revision: 33550

12 years agomake uci-defaults switch detection work on rt5350
John Crispin [Tue, 25 Sep 2012 14:47:18 +0000 (14:47 +0000)]
make uci-defaults switch detection work on rt5350

SVN-Revision: 33549

12 years agoadd ethernet support for rt5350
John Crispin [Tue, 25 Sep 2012 14:47:08 +0000 (14:47 +0000)]
add ethernet support for rt5350

SVN-Revision: 33548

12 years agomake ramips ethernet use a register mapping table
John Crispin [Tue, 25 Sep 2012 14:46:58 +0000 (14:46 +0000)]
make ramips ethernet use a register mapping table

SVN-Revision: 33547

12 years agoactivate failsafe on all ports of the switch and not just port 0.
Hauke Mehrtens [Tue, 25 Sep 2012 14:04:59 +0000 (14:04 +0000)]
activate failsafe on all ports of the switch and not just port 0.

Sometimes the port 0 was the WAN port or there could be some device
where the port 0 is not wired to an actual Ethernet port. Now telnet in
failsafe will listen on all ports of the switch so user do not have to
search for the correct port any more. This change will make the switch
leak traffic between the WAN and the LAN port, but you should not use
failsafe while connected to a untrusted network.

SVN-Revision: 33544

12 years agoar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards
Gabor Juhos [Tue, 25 Sep 2012 12:57:41 +0000 (12:57 +0000)]
ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards

With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed  from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.

SVN-Revision: 33540

12 years agoar71xx: automatically find WLAN calibration data on TEW-673GRU
Gabor Juhos [Tue, 25 Sep 2012 12:57:40 +0000 (12:57 +0000)]
ar71xx: automatically find WLAN calibration data on TEW-673GRU

SVN-Revision: 33539

12 years agoar71xx: automatically find WLAN calibration data on DIR-825-B1
Gabor Juhos [Tue, 25 Sep 2012 12:57:38 +0000 (12:57 +0000)]
ar71xx: automatically find WLAN calibration data on DIR-825-B1

SVN-Revision: 33538

12 years agoar71xx: add missing backslash to uci-defaults/leds (closes #12240)
Gabor Juhos [Tue, 25 Sep 2012 12:49:43 +0000 (12:49 +0000)]
ar71xx: add missing backslash to uci-defaults/leds (closes #12240)

SVN-Revision: 33537

12 years agounbreak port mapping detection
John Crispin [Tue, 25 Sep 2012 09:51:48 +0000 (09:51 +0000)]
unbreak port mapping detection

SVN-Revision: 33536

12 years agoar71xx: use different machtype and setup for the TL-MR3040
Gabor Juhos [Mon, 24 Sep 2012 18:45:56 +0000 (18:45 +0000)]
ar71xx: use different machtype and setup for the TL-MR3040

Should fix #12211. Compile tested only.

SVN-Revision: 33535

12 years agoversion.mk: ensure that %S is always populated with a subtarget identifier, fallback...
Jo-Philipp Wich [Mon, 24 Sep 2012 18:26:48 +0000 (18:26 +0000)]
version.mk: ensure that %S is always populated with a subtarget identifier, fallback to "generic" if no subtarget exists

SVN-Revision: 33534

12 years agobase-files: remove obsolete entries from sysctl.conf (#12236)
Felix Fietkau [Mon, 24 Sep 2012 15:24:01 +0000 (15:24 +0000)]
base-files: remove obsolete entries from sysctl.conf (#12236)

SVN-Revision: 33532

12 years agoopenssl: use asm SHA1, SHA256, AES on MIPS.
Felix Fietkau [Mon, 24 Sep 2012 15:23:57 +0000 (15:23 +0000)]
openssl: use asm SHA1, SHA256, AES on MIPS.

On a lightly loaded 24Kc, as measured by 'openssl speed sha1', shows between
27% and 120% speedup depending on block size.
SHA1 is notably used in Transmission for piece verification.
Patch by Catalin Patulea

SVN-Revision: 33531

12 years agomac80211: extend help for new options in b43-fwsquash.py
Hauke Mehrtens [Sun, 23 Sep 2012 18:48:27 +0000 (18:48 +0000)]
mac80211: extend help for new options in b43-fwsquash.py

SVN-Revision: 33530

12 years agomac80211: fiy typo in b43-fwsquash.py
Hauke Mehrtens [Sun, 23 Sep 2012 18:47:45 +0000 (18:47 +0000)]
mac80211: fiy typo in b43-fwsquash.py

Thanks Jonas

SVN-Revision: 33529

12 years agohostapd: move the + to the correct line
Felix Fietkau [Sun, 23 Sep 2012 12:36:32 +0000 (12:36 +0000)]
hostapd: move the + to the correct line

SVN-Revision: 33527

12 years agogrub2: use the static lzma lib instead of the dynamic one
Felix Fietkau [Sun, 23 Sep 2012 10:38:06 +0000 (10:38 +0000)]
grub2: use the static lzma lib instead of the dynamic one

SVN-Revision: 33526

12 years agox86: avoid using grub prepare when using grub2
Felix Fietkau [Sun, 23 Sep 2012 09:59:56 +0000 (09:59 +0000)]
x86: avoid using grub prepare when using grub2

SVN-Revision: 33525

12 years agobuild: add the + token to any commands that can pass through the jobserver, fixes...
Felix Fietkau [Sun, 23 Sep 2012 09:50:01 +0000 (09:50 +0000)]
build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems

SVN-Revision: 33523

12 years agogrub2: disable nls to fix build failure when libintl/host is built
Felix Fietkau [Sun, 23 Sep 2012 09:49:56 +0000 (09:49 +0000)]
grub2: disable nls to fix build failure when libintl/host is built

SVN-Revision: 33522

12 years agobuild: pass MAKE_JOBSERVER via environment to avoid leaking it to error messages
Felix Fietkau [Sun, 23 Sep 2012 09:49:52 +0000 (09:49 +0000)]
build: pass MAKE_JOBSERVER via environment to avoid leaking it to error messages

SVN-Revision: 33521

12 years agotools: flex depends on m4
Felix Fietkau [Sun, 23 Sep 2012 09:03:53 +0000 (09:03 +0000)]
tools: flex depends on m4

SVN-Revision: 33520

12 years agotools/mkimage: avoid picking up unrelated /usr/include headers with the same name...
Felix Fietkau [Sun, 23 Sep 2012 08:49:34 +0000 (08:49 +0000)]
tools/mkimage: avoid picking up unrelated /usr/include headers with the same name as internal header files (e.g. image.h), fixes #12232

SVN-Revision: 33519

12 years agoinclude/netfilter.mk: remove a few obsolete lines
Felix Fietkau [Sun, 23 Sep 2012 08:25:32 +0000 (08:25 +0000)]
include/netfilter.mk: remove a few obsolete lines

SVN-Revision: 33518

12 years agoe2fsprogs: drop an unnecessary include that breaks on mac os x
Felix Fietkau [Sat, 22 Sep 2012 23:34:54 +0000 (23:34 +0000)]
e2fsprogs: drop an unnecessary include that breaks on mac os x

SVN-Revision: 33517

12 years agox86-generic: enable a few more common kernel options/drivers
Felix Fietkau [Sat, 22 Sep 2012 23:29:20 +0000 (23:29 +0000)]
x86-generic: enable a few more common kernel options/drivers

SVN-Revision: 33516

12 years agokernel: increase log buffer size
Felix Fietkau [Sat, 22 Sep 2012 23:10:42 +0000 (23:10 +0000)]
kernel: increase log buffer size

SVN-Revision: 33515

12 years agox86: enable usb storage support for the generic subtarget to support booting from...
Felix Fietkau [Sat, 22 Sep 2012 21:15:59 +0000 (21:15 +0000)]
x86: enable usb storage support for the generic subtarget to support booting from usb devices

SVN-Revision: 33514

12 years agox86: add support for building grub2 images
Felix Fietkau [Sat, 22 Sep 2012 20:10:42 +0000 (20:10 +0000)]
x86: add support for building grub2 images

SVN-Revision: 33513