Michael Büsch [Wed, 16 Nov 2011 22:45:23 +0000 (22:45 +0000)]
p54spi: workqueue deadlock fix
SVN-Revision: 29202
Michael Büsch [Wed, 16 Nov 2011 22:34:38 +0000 (22:34 +0000)]
omap24xx: Add workaround for omapfb locking bug.
SVN-Revision: 29201
Michael Büsch [Wed, 16 Nov 2011 22:26:12 +0000 (22:26 +0000)]
p54spi: Lock fixes
SVN-Revision: 29200
Michael Büsch [Wed, 16 Nov 2011 19:03:23 +0000 (19:03 +0000)]
Revert r29193
SVN-Revision: 29195
Michael Büsch [Wed, 16 Nov 2011 19:02:12 +0000 (19:02 +0000)]
omap24xx: Set platform specific optimization flags
SVN-Revision: 29194
Michael Büsch [Wed, 16 Nov 2011 19:01:19 +0000 (19:01 +0000)]
n810: Add xmodmap to profile
SVN-Revision: 29193
Michael Büsch [Wed, 16 Nov 2011 17:27:36 +0000 (17:27 +0000)]
mconf: Fix compile warning: "warning: conflicting types for ‘sym_set_all_changed’"
SVN-Revision: 29190
Michael Büsch [Wed, 16 Nov 2011 16:05:23 +0000 (16:05 +0000)]
Add xorg feed to feeds.conf.default
SVN-Revision: 29188
Jo-Philipp Wich [Wed, 16 Nov 2011 15:01:18 +0000 (15:01 +0000)]
base-files: rewrite killing of nonessential services to not rely on top, use the proc filesystem only
SVN-Revision: 29187
Jo-Philipp Wich [Wed, 16 Nov 2011 13:17:35 +0000 (13:17 +0000)]
busybox: fix empty password detection in telnetd init (#10432)
SVN-Revision: 29183
Nicolas Thill [Tue, 15 Nov 2011 23:40:39 +0000 (23:40 +0000)]
package/ppp: fix typo in r28868 (closes: #10429)
SVN-Revision: 29165
Florian Fainelli [Tue, 15 Nov 2011 22:24:22 +0000 (22:24 +0000)]
include bridge and 8021q modules by default
SVN-Revision: 29164
Florian Fainelli [Tue, 15 Nov 2011 22:24:18 +0000 (22:24 +0000)]
allow building 8021q and bridge as modules
SVN-Revision: 29163
Florian Fainelli [Tue, 15 Nov 2011 19:15:42 +0000 (19:15 +0000)]
kmod-r6040 depends on kmod-libphy
SVN-Revision: 29162
John Crispin [Tue, 15 Nov 2011 18:21:00 +0000 (18:21 +0000)]
lantiq: add runtime generation of /etc/config/network
SVN-Revision: 29161
Jo-Philipp Wich [Tue, 15 Nov 2011 17:54:02 +0000 (17:54 +0000)]
busybox: revert accidentally committed debugging flag
SVN-Revision: 29158
Jo-Philipp Wich [Tue, 15 Nov 2011 17:38:55 +0000 (17:38 +0000)]
busybox: fix hexdump segmentation fault with an empty leading format unit
SVN-Revision: 29156
Felix Fietkau [Tue, 15 Nov 2011 14:53:21 +0000 (14:53 +0000)]
ath9k: reorganize patches, reset hardware after full sleep (fixes #10349)
SVN-Revision: 29155
Jo-Philipp Wich [Tue, 15 Nov 2011 10:17:59 +0000 (10:17 +0000)]
uhttpd: prevent linking uhttpd binary against crypto libraries
SVN-Revision: 29152
Jo-Philipp Wich [Mon, 14 Nov 2011 21:37:53 +0000 (21:37 +0000)]
broadcom-wl: align RADIUS options with r26482, patch by Etienne Champetier <etienne.champetier@free.fr>
SVN-Revision: 29136
Felix Fietkau [Mon, 14 Nov 2011 21:21:24 +0000 (21:21 +0000)]
ath9k: do not put the hardware to full-sleep while tx is pending
SVN-Revision: 29133
Felix Fietkau [Mon, 14 Nov 2011 21:21:03 +0000 (21:21 +0000)]
ath9k: rework radio stop/start cleanup, avoid duplicate rx/tx stop, avoid early phy stop
SVN-Revision: 29132
Jo-Philipp Wich [Mon, 14 Nov 2011 19:02:01 +0000 (19:02 +0000)]
base-files: prime root password with "x" to notify programs that there is a shadow record, fix /bin/login.sh password detection accordingly. Solves broken key based dropbear login with empty password after r28935.
SVN-Revision: 29130
John Crispin [Mon, 14 Nov 2011 18:55:58 +0000 (18:55 +0000)]
lantiq: fix falcon build breakage
dev-wifi-rt2x00 fails to build on falcon due to missing pci
SVN-Revision: 29129
Gabor Juhos [Mon, 14 Nov 2011 17:43:15 +0000 (17:43 +0000)]
ar71xx: fix USB LED on the DB120 board
SVN-Revision: 29126
Gabor Juhos [Mon, 14 Nov 2011 17:43:14 +0000 (17:43 +0000)]
ar71xx: add a function for selecting output signal on a given GPIO pin
SVN-Revision: 29125
Gabor Juhos [Mon, 14 Nov 2011 17:43:13 +0000 (17:43 +0000)]
ar71xx: fix GPIO function handling on AR934x
SVN-Revision: 29124
Gabor Juhos [Mon, 14 Nov 2011 17:43:11 +0000 (17:43 +0000)]
ar71xx: add AR71XX_ prefix to GPIO_REG_* defines
SVN-Revision: 29123
Gabor Juhos [Mon, 14 Nov 2011 17:43:10 +0000 (17:43 +0000)]
ar71xx: merge nand scan patch
SVN-Revision: 29122
Felix Fietkau [Mon, 14 Nov 2011 14:06:37 +0000 (14:06 +0000)]
mac80211: enable support for RaLink Rt53xx USB devices in rt2800usb
The driver works quite nice and stable for me using a RaLink Rt5370 USB device.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29116
Felix Fietkau [Mon, 14 Nov 2011 14:06:32 +0000 (14:06 +0000)]
netifd: update to latest version, fixes tcp connection loss issues on dhcp rekey
SVN-Revision: 29115
Jo-Philipp Wich [Mon, 14 Nov 2011 13:18:09 +0000 (13:18 +0000)]
uci: update to latest git rev
7289b2d69aaffa9299b47aaaa0da1e9969ace6c1
SVN-Revision: 29111
Gabor Juhos [Mon, 14 Nov 2011 13:07:47 +0000 (13:07 +0000)]
ar71xx: fix a compiler warning
SVN-Revision: 29110
Gabor Juhos [Mon, 14 Nov 2011 13:07:45 +0000 (13:07 +0000)]
ar71xx: fix GPIO count for AR934x
SVN-Revision: 29109
Gabor Juhos [Mon, 14 Nov 2011 11:49:53 +0000 (11:49 +0000)]
ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X
SVN-Revision: 29108
Gabor Juhos [Mon, 14 Nov 2011 11:49:51 +0000 (11:49 +0000)]
ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling
SVN-Revision: 29107
Gabor Juhos [Mon, 14 Nov 2011 11:49:49 +0000 (11:49 +0000)]
ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
SVN-Revision: 29106
Gabor Juhos [Mon, 14 Nov 2011 11:49:47 +0000 (11:49 +0000)]
ar71xx: add an irq parameter for ar724x_pcibios_init
SVN-Revision: 29105
Gabor Juhos [Mon, 14 Nov 2011 07:38:09 +0000 (07:38 +0000)]
ar71xx: remove hardwired interface parameters from mach-* files
SVN-Revision: 29103
Gabor Juhos [Mon, 14 Nov 2011 07:38:07 +0000 (07:38 +0000)]
ar71xx: force hardwired interface parameters in ar71xx_add_device_eth
SVN-Revision: 29102
Gabor Juhos [Mon, 14 Nov 2011 07:38:05 +0000 (07:38 +0000)]
ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
SVN-Revision: 29101
Florian Fainelli [Sun, 13 Nov 2011 19:19:22 +0000 (19:19 +0000)]
build images for Pirelli A226M (#10409)
SVN-Revision: 29045
Florian Fainelli [Sun, 13 Nov 2011 19:19:18 +0000 (19:19 +0000)]
register uart0 on DWV-S0 boards (#10409)
SVN-Revision: 29044
Florian Fainelli [Sun, 13 Nov 2011 19:19:14 +0000 (19:19 +0000)]
refresh 3.0 patches
SVN-Revision: 29043
Florian Fainelli [Sun, 13 Nov 2011 19:19:10 +0000 (19:19 +0000)]
refresh 2.6.39 patches
SVN-Revision: 29042
Florian Fainelli [Sun, 13 Nov 2011 19:19:05 +0000 (19:19 +0000)]
rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch
SVN-Revision: 29041
Florian Fainelli [Sun, 13 Nov 2011 18:41:26 +0000 (18:41 +0000)]
fix typo, load ip17xx switch module
SVN-Revision: 29039
Gabor Juhos [Sun, 13 Nov 2011 17:36:36 +0000 (17:36 +0000)]
ar71xx: enable has_gbit flag on AR724{0,1}
SVN-Revision: 29026
Gabor Juhos [Sun, 13 Nov 2011 12:48:03 +0000 (12:48 +0000)]
ar71xx: fixup onboard PCIe chip registration on the DB120 board
SVN-Revision: 29022
Gabor Juhos [Sun, 13 Nov 2011 12:48:01 +0000 (12:48 +0000)]
ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
SVN-Revision: 29021
John Crispin [Sun, 13 Nov 2011 12:10:52 +0000 (12:10 +0000)]
madwifi: rename patch from ifxmips -> lantiq
SVN-Revision: 29020
John Crispin [Sun, 13 Nov 2011 12:09:34 +0000 (12:09 +0000)]
uboot-lantiq: not all configs were using lzma for compression, add gigaset ramboot image
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
SVN-Revision: 29019
Jonas Gorski [Sun, 13 Nov 2011 11:45:09 +0000 (11:45 +0000)]
include/kernel.mk: don't check for modules.builtin on 2.6.32-
modules.builtin is only available in 2.6.33 and later, so fall back to
assuming it's built-in for older kernels.
SVN-Revision: 29018
Gabor Juhos [Sun, 13 Nov 2011 11:27:04 +0000 (11:27 +0000)]
ar71xx: ag71xx: add support for getting switch port link status
SVN-Revision: 29017
Gabor Juhos [Sun, 13 Nov 2011 11:27:03 +0000 (11:27 +0000)]
ar71xx: remove mii_ctrl resources of the ethernet devices
SVN-Revision: 29016
Gabor Juhos [Sun, 13 Nov 2011 11:27:01 +0000 (11:27 +0000)]
ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx
SVN-Revision: 29015
Gabor Juhos [Sun, 13 Nov 2011 11:27:00 +0000 (11:27 +0000)]
ar71xx: ag71xx: remove unused mii_cfg related functions and defines
SVN-Revision: 29014
Gabor Juhos [Sun, 13 Nov 2011 11:26:59 +0000 (11:26 +0000)]
ar71xx: set MII interface speed from the set_speed callbacks
SVN-Revision: 29013
Gabor Juhos [Sun, 13 Nov 2011 11:26:57 +0000 (11:26 +0000)]
ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
Also rename the corresponding callback functions.
SVN-Revision: 29012
Gabor Juhos [Sun, 13 Nov 2011 11:26:56 +0000 (11:26 +0000)]
ar71xx: ag71xx: remove MII interface setup code
SVN-Revision: 29011
Gabor Juhos [Sun, 13 Nov 2011 11:26:54 +0000 (11:26 +0000)]
ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
SVN-Revision: 29010
Gabor Juhos [Sun, 13 Nov 2011 11:26:52 +0000 (11:26 +0000)]
ar71xx: fix occasional kernel hangs during boot on AR934x
The patch taken from the linux-mips mailing list.
The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.
This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.
SVN-Revision: 29009
Gabor Juhos [Sun, 13 Nov 2011 11:26:51 +0000 (11:26 +0000)]
ar71xx: refresh kernel patches
SVN-Revision: 29008
Jonas Gorski [Sun, 13 Nov 2011 10:48:05 +0000 (10:48 +0000)]
linux: update 3.1 to 3.1.1
SVN-Revision: 29007
John Crispin [Sat, 12 Nov 2011 23:40:21 +0000 (23:40 +0000)]
lantiq: add uci-defaults code for handling leds
SVN-Revision: 29004
John Crispin [Sat, 12 Nov 2011 23:40:16 +0000 (23:40 +0000)]
lantiq: add /lib/lantiq.sh and make hotplug handlers use it
SVN-Revision: 29003
John Crispin [Sat, 12 Nov 2011 23:40:12 +0000 (23:40 +0000)]
lantiq: rename leds
SVN-Revision: 29002
John Crispin [Sat, 12 Nov 2011 23:40:07 +0000 (23:40 +0000)]
lantiq: split compat headers out of bsp header patch
SVN-Revision: 29001
John Crispin [Sat, 12 Nov 2011 23:40:01 +0000 (23:40 +0000)]
lantiq: adds hotplug handler for loading rt2x00 firmware
SVN-Revision: 29000
John Crispin [Sat, 12 Nov 2011 23:39:56 +0000 (23:39 +0000)]
lantiq: adds hotplug handler for handling buttons and makes w303v work with it
SVN-Revision: 28999
John Crispin [Sat, 12 Nov 2011 23:39:51 +0000 (23:39 +0000)]
lantiq: cleanup default package selection
SVN-Revision: 28998
John Crispin [Sat, 12 Nov 2011 18:41:15 +0000 (18:41 +0000)]
lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it
SVN-Revision: 28994
Gabor Juhos [Sat, 12 Nov 2011 14:09:52 +0000 (14:09 +0000)]
kernel: ar8216: add support for the AR8236 switch
SVN-Revision: 28993
Gabor Juhos [Sat, 12 Nov 2011 14:09:50 +0000 (14:09 +0000)]
kernel: ar8216: move port vlan setup into a separate function
SVN-Revision: 28992
Nicolas Thill [Sat, 12 Nov 2011 13:53:15 +0000 (13:53 +0000)]
package/base-files: enhance service functions
* allow matching process by name (useful for processes changing it)
* check if first argument is executable
* fix function name used in error messages
SVN-Revision: 28991
Gabor Juhos [Sat, 12 Nov 2011 12:50:20 +0000 (12:50 +0000)]
ar71xx: use the button for WPS control on the DB120
SVN-Revision: 28990
Gabor Juhos [Sat, 12 Nov 2011 12:50:19 +0000 (12:50 +0000)]
ar71xx: register the second ethernet interface on the DB120 board
SVN-Revision: 28989
Gabor Juhos [Sat, 12 Nov 2011 12:50:18 +0000 (12:50 +0000)]
ar71xx: implement SoC specific phy interface setup
SVN-Revision: 28988
Gabor Juhos [Sat, 12 Nov 2011 12:50:16 +0000 (12:50 +0000)]
ar71xx: move phy interface setup into a separate function
SVN-Revision: 28987
Gabor Juhos [Sat, 12 Nov 2011 12:09:59 +0000 (12:09 +0000)]
ar71xx: register both MDIO bus on the DB120 board
SVN-Revision: 28986
Gabor Juhos [Sat, 12 Nov 2011 12:09:56 +0000 (12:09 +0000)]
ar71xx: add AR934X specific MDIO registration code
SVN-Revision: 28985
Gabor Juhos [Sat, 12 Nov 2011 12:09:54 +0000 (12:09 +0000)]
ar71xx: add a secondary mdio bus
SVN-Revision: 28984
Gabor Juhos [Sat, 12 Nov 2011 12:09:50 +0000 (12:09 +0000)]
ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_*
SVN-Revision: 28983
Gabor Juhos [Sat, 12 Nov 2011 12:09:48 +0000 (12:09 +0000)]
ar71xx: add an id argument to ar71xx_add_device_mdio
SVN-Revision: 28982
Gabor Juhos [Sat, 12 Nov 2011 12:09:42 +0000 (12:09 +0000)]
ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa
SVN-Revision: 28981
Gabor Juhos [Sat, 12 Nov 2011 10:54:20 +0000 (10:54 +0000)]
ar71xx: add AR934x specific USB setup
SVN-Revision: 28980
Gabor Juhos [Sat, 12 Nov 2011 10:54:18 +0000 (10:54 +0000)]
ar71xx: register the first ethernet interface on the DB120 board
SVN-Revision: 28979
Gabor Juhos [Sat, 12 Nov 2011 10:54:17 +0000 (10:54 +0000)]
ar71xx: allow to register ethernet interfaces for AR934X
SVN-Revision: 28978
Gabor Juhos [Sat, 12 Nov 2011 10:54:16 +0000 (10:54 +0000)]
ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered
SVN-Revision: 28977
Gabor Juhos [Sat, 12 Nov 2011 10:54:15 +0000 (10:54 +0000)]
ar71xx: add AR934X specific bootstrap and reset register bits
SVN-Revision: 28976
Gabor Juhos [Sat, 12 Nov 2011 10:54:10 +0000 (10:54 +0000)]
ar71xx: add diag support for the DB120 board
SVN-Revision: 28975
Gabor Juhos [Sat, 12 Nov 2011 10:54:09 +0000 (10:54 +0000)]
ar71xx: fix GPIO direction setup for AR934x
SVN-Revision: 28974
Gabor Juhos [Sat, 12 Nov 2011 10:54:08 +0000 (10:54 +0000)]
ar71xx: fix AR934X clock frequency calculation
SVN-Revision: 28973
Gabor Juhos [Sat, 12 Nov 2011 10:54:06 +0000 (10:54 +0000)]
package: add om2p-watchdog script
Based on a patch by: Marek Lindner <lindner_marek@yahoo.de>
SVN-Revision: 28972
Gabor Juhos [Sat, 12 Nov 2011 10:54:04 +0000 (10:54 +0000)]
ar71xx: generate ubootenv from uci-defaults instead of providing defconfig
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28971
John Crispin [Fri, 11 Nov 2011 22:23:26 +0000 (22:23 +0000)]
pjsip: bump to 1.10 and improve ltq_tapi backend
SVN-Revision: 28963
John Crispin [Fri, 11 Nov 2011 21:59:11 +0000 (21:59 +0000)]
lantiq: improve falcon package selection
SVN-Revision: 28962
John Crispin [Fri, 11 Nov 2011 21:59:01 +0000 (21:59 +0000)]
lantiq: fix breakage introduced in 3.1 bump
SVN-Revision: 28961
Jo-Philipp Wich [Fri, 11 Nov 2011 13:25:31 +0000 (13:25 +0000)]
base-files: now that the initial password is completely empty (and not primed with "!") adjust login.sh for it to make telnetd available again
SVN-Revision: 28943
Nicolas Thill [Fri, 11 Nov 2011 13:23:29 +0000 (13:23 +0000)]
package/base-files-network: fix udhcpc issues introduced in r28866 (closes: #10383)
SVN-Revision: 28942
projects / openwrt / staging / ldir.git / log