drm/i915/rps: Add frequency translation helpers

Add two helpers that for reading the actual GT's frequency. The
two helpers are:

 - intel_rps_read_cagf: reads the frequency and returns it not
   normalized

 - intel_rps_read_actual_frequency: provides the frequency in Hz.

Use the above helpers in sysfs and debugfs.

Signed-off-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213183736.31992-2-andi@etezian.org

drm/i915: Use EAGAIN for trylock failures

While not good behaviour, it is, however, established behaviour that we
can punt EAGAIN to userspace if we need to retry the ioctl. When trying
to acquire a mutex, prefer to use EAGAIN to propagate losing the race
so that if it does end up back in userspace, we try again.

Fixes: c81471f5e95c ("drm/i915: Copy across scheduler behaviour flags across submit fences")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/800
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213160347.1789004-1-chris@chris-wilson.co.uk

drm/i915: Introduce new macros for tracing

New macros ENGINE_TRACE(), CE_TRACE(), RQ_TRACE() and
GT_TRACE() are introduce to tag device name and engine
name with contexts and requests tracing in i915.

Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213155152.69182-2-venkata.s.dhanalakota@intel.com

drm/i915/perf: Register sysctl path globally

We do not require to register the sysctl paths per instance,
so making registration global.

v2: make sysctl path register and unregister function driver
    specific (Tvrtko and Lucas).

Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213155152.69182-1-venkata.s.dhanalakota@intel.com

drm/i915/icl: Cleanup combo PHY aux power well handlers

Now that the combo PHY aux power well handlers are used exclusively on
Icelake, we can drop a bunch of the extra tests.

v2: Don't try to use intel_uncore_rmw for register updates yet; there's
    pending display uncore patches that need to land first.  (Lucas)

v3: Drop the combo phy assertion.  It was backward before, but doesn't
    seem terribly necessary.  I'm keeping the IS_ICELAKE assertion
    though since we often copy/paste/modify the power well tables when
    defining new platforms and it's too easy to cargo cult the
    ICL-specific handling to new platforms that shouldn't use it.
    (Lucas)

v4: Fix build; forgot to commit all the changes.  (CI)

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213010600.701315-1-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915/tgl: Drop Wa#1178

The TGL workaround database no longer shows Wa #1178 (or anything
similar under different workaround names/numbers) so we should be able
to drop it.  In fact Swati just discovered that applying this workaround
is the root cause of some power well enable failures we've been seeing
in CI (gitlab issue 498).

Once we stop applying this WA, TGL no longer utilizes any of the special
handling provided by icl_combo_phy_aux_power_well_ops so we can just
drop back to using the standard hsw-style power well ops instead.

v3: Drop now-unused _TGL_AUX_ANAOVRD1_C definition too.  (Lucas)

Closes: https://gitlab.freedesktop.org/drm/intel/issues/498
Fixes: deea06b47574 ("drm/i915/tgl: apply Display WA #1178 to fix type C dongles")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213001511.678070-3-matthew.d.roper@intel.com

drm/i915/ehl: Define EHL powerwells independently of ICL

Outputs C and D on EHL are combo PHY outputs and thus should not be
using the same TC AUX power well handlers as ICL.  And even though
icl_combo_phy_aux_power_well_ops works okay for EHL/JSL combo PHYs none
of its special handling is actually necessary for this platform:
 * EHL/JSL don't actually need to program PORT_CL_DW12
 * Display WA #1178 does not apply to EHL/JSL

Thus we can simply drop back to using our standard "hsw-style" power
well ops for EHL AUX power wells.

Bspec: 4301
Fixes: f722b8c1e2a2 ("drm/i915/ehl: All EHL ports are combo phys")
Cc: Jose Souza <jose.souza@intel.com>
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213001511.678070-2-matthew.d.roper@intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

drm/i915/selftests: remove a condition

We know that "err" is non-zero so there is no need to check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213105050.y2v5nylsuxvc44jj@kili.mountain

drm/i915/bios: fix off by one in parse_generic_dtd()

The "num_dtd" variable is the number of elements in the
generic_dtd->dtd[] array so the > needs to be >= to prevent reading one
element beyond the end of the array.

Fixes: 33ef6d4fd8df ("drm/i915/vbt: Handle generic DTD block")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212091130.zf2g53njf5u24wk6@kili.mountain

drm/i915: Streamline skl_commit_modeset_enables()

skl_commit_modeset_enables() is a bit of mess. Let's streamline
it by simply tracking which pipes still need to be updated.
As a bonus we get rid of the state->wm_results.dirty_pipes usage.

v2: Rebase due to port sync

Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144105.3239-2-ville.syrjala@linux.intel.com

drm/i915/cml: Separate U series pci id from origianl list.

U series device need different DDI buffer setup for eDP
and DP. If driver did not recognize ULT id proerply.
The setting for H and S series would be used.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210150415.10705-2-shawn.c.lee@intel.com

drm/i915/cml: Remove unsupport PCI ID

commit 'a7b4deeb02b9 ("drm/i915/cml: Add CML PCI IDS)'
introduced new PCI ID that CML support. But some PCI
IDs were removed in BSpec for CML. This patch is used
to eliminate the unsed ID.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210150415.10705-1-shawn.c.lee@intel.com

drm/i915/gt: Mark up ips_mchdev pointer access

drivers/gpu/drm/i915/gt/intel_rps.c:1726:24: error: incompatible types in comparison expression (different address spaces):
drivers/gpu/drm/i915/gt/intel_rps.c:1726:24:    struct drm_i915_private [noderef] <asn:4> *
drivers/gpu/drm/i915/gt/intel_rps.c:1726:24:    struct drm_i915_private *

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212140459.1307617-7-chris@chris-wilson.co.uk

drm/i915: Set fence_work.ops before dma_fence_init

Since dma_fence_init may call ops (because of a meaningless
trace_dma_fence), we need to set the worker ops prior to that call.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 8e458fe2ee05 ("drm/i915: Generalise the clflush dma-worker")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212154224.1631531-1-chris@chris-wilson.co.uk

drm/i915: Improve i915_inject_probe_error macro

On non-debug builds we were not using i915 param and thus
we may cause "unused variable" warning/error if caller was
not using i915 elsewhere. Let compiler see this param.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212121903.72524-1-michal.wajdeczko@intel.com

drm/i915/gem: Asynchronous cmdparser

Execute the cmdparser asynchronously as part of the submission pipeline.
Using our dma-fences, we can schedule execution after an asynchronous
piece of work, so we move the cmdparser out from under the struct_mutex
inside execbuf as run it as part of the submission pipeline. The same
security rules apply, we copy the user batch before validation and
userspace cannot touch the validation shadow. The only caveat is that we
will do request construction before we complete cmdparsing and so we
cannot know the outcome of the validation step until later -- so the
execbuf ioctl does not report -EINVAL directly, but we must cancel
execution of the request and flag the error on the out-fence.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/611
Closes: https://gitlab.freedesktop.org/drm/intel/issues/412
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211230858.599030-2-chris@chris-wilson.co.uk

drm/i915/gem: Prepare gen7 cmdparser for async execution

The gen7 cmdparser is primarily a promotion-based system to allow access
to additional registers beyond the HW validation, and allows fallback to
normal execution of the user batch buffer if valid and requires
chaining. In the next patch, we will do the cmdparser validation in the
pipeline asynchronously and so at the point of request construction we
will not know if we want to execute the privileged and validated batch,
or the original user batch. The solution employed here is to execute
both batches, one with raised privileges and one as normal. This is
because the gen7 MI_BATCH_BUFFER_START command cannot change privilege
level within a batch and must strictly use the current privilege level
(or undefined behaviour kills the GPU). So in order to execute the
original batch, we need a second non-priviledged batch buffer chain from
the ring, i.e. we need to emit two batches for each user batch. Inside
the two batches we determine which one should actually execute, we
provide a conditional trampoline to call the original batch.

Implementation-wise, we create a single buffer and write the shadow and
the trampoline inside it at different offsets; and bind the buffer into
both the kernel GGTT for the privileged execution of the shadow and into
the user ppGTT for the non-privileged execution of the trampoline and
original batch. One buffer, two batches and two vma.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211230858.599030-1-chris@chris-wilson.co.uk

drm/i915/gt: Only ignore rc6 parking for PCU on byt/bsw

An oversight in that we use rc6->ctl_enable to disable rc6 on gen9 and
so it does not simply indicate indirect control via a PCU. Switch the
rc6->ctl_enable check for a platform-based check.

Fixes: 972745fd5770 ("drm/i915/gt: Disable manual rc6 for Braswell/Baytrail")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191212072737.884335-2-chris@chris-wilson.co.uk

drm/i915: Align start for memcpy_from_wc

The movntqda requires 16-byte alignment for the source pointer. Avoid
falling back to clflush if the source pointer is misaligned by doing the
doing a small uncached memcpy to fixup the alignments.

v2: Turn the unaligned copy into a genuine helper

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211110437.4082687-5-chris@chris-wilson.co.uk

drm/i915/gem: Tidy up error handling for eb_parse()

As the caller no longer uses the i915_vma result, stop returning it and
just return the error code instead.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211110437.4082687-4-chris@chris-wilson.co.uk

drm/i915: Simplify error escape from cmdparser

We need to flush the destination buffer, even on error, to maintain
consistent cache state. Thereby removing the jump on error past the
clear, and reducing the loop-escape mechanism to a mere break.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211110437.4082687-3-chris@chris-wilson.co.uk

drm/i915: Remove redundant parameters from intel_engine_cmd_parser

Declutter the calling interface by reducing the parameters to the
i915_vma and associated offsets.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211110437.4082687-2-chris@chris-wilson.co.uk

drm/i915: Fix cmdparser drm.debug

The cmdparser rejection debug is not for driver development, but for the
user, for which we use a plain DRM_DEBUG().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211110437.4082687-1-chris@chris-wilson.co.uk

drm/i915/gt: Disable manual rc6 for Braswell/Baytrail

The initial investigated showed that while the PCU on Braswell/Baytrail
controlled RC6 itself. setting the software RC6 request made no
difference. Further testing reveals though that it causes a delay in the
PCU on enabling RC6.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/763
Fixes: 730eaeb52426 ("drm/i915/gt: Manual rc6 entry upon parking")
Testcase: igt/perf/rc6-disable
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Acked-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210180111.3958558-1-chris@chris-wilson.co.uk

drm/i915/uc: Drop explicit ggtt param in some uc_fw functions

There is no need to pass explicit ggtt since we already have
a trick to get parent gt from uc_fw, we only need to use it.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211124549.59516-4-michal.wajdeczko@intel.com

drm/i915/uc: Drop explicit gt param in some uc_fw functions

There is no need to pass explicit gt since we already have
a trick to get parent gt from uc_fw, we only need to use it.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211124549.59516-3-michal.wajdeczko@intel.com

drm/i915/uc: Drop explicit i915 param in some uc_fw functions

There is no need to pass explicit i915 since we already have
a debug trick to get parent gt from uc_fw, we only need to
make this trick available on non-debug builds.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211124549.59516-2-michal.wajdeczko@intel.com

drm/i915: Use the i915_device name for identifying our request fences

Use the dev_name(i915) to identify the requests for debugging, so we can
tell different device timelines apart.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Reviewed-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191211150204.133471-1-chris@chris-wilson.co.uk

drm/i915: remove redundant checks for a null fb pointer

A prior check and return when pointer fb is null makes
subsequent null checks on fb redundant.  Remove the redundant
null checks.

Addresses-Coverity: ("Logically dead code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210142349.333171-1-colin.king@canonical.com

drm/i915/display: remove duplicated assignment to pointer crtc_state

Pointer crtc_state is being assigned twice, one of these is redundant
and can be removed.

Addresses-Coverity: ("Evaluation order violation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210144535.341977-1-colin.king@canonical.com

drm/i915: Pass cpu transcoder to assert_pipe()

In order to eliminate intel_pipe_to_cpu_transcoder() (and its
crtc->config usage) let's pass the cpu transcoder to
assert_pipe() so we don't have to do the pipe->cpu transcoder
lookup on HSW+.

On VLV/CHV this can get called during eDP init, which
happens before crtc->config->cpu_transcoder is even
populated. So currently we're always reading PIPECONF(A)
there even if we're trying to check the state of some
other pipe.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112163812.22075-4-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915: ELiminate intel_pipe_to_cpu_transcoder() from assert_fdi_tx()

Let's start to eliminate intel_pipe_to_cpu_transcoder() so that
we can get rid of one more crtc->config usage (which we will want
to nuke as well).

In the case of assert_fdi_tx() we know that we're never
dealing with the EDP transcoder so we can simply replace
this with a cast.

v2: Fix poor English in comment

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112163812.22075-3-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>

drm/i915/selftests: Show the i915_active on failure

Print the i915_active state on selftest failure, with a hope it helps
illuminate the cause of the failure.

References: https://gitlab.freedesktop.org/drm/intel/issues/765
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210115502.3767070-1-chris@chris-wilson.co.uk

drm/i915/gem: Wait on unbind barriers when invalidating userptr

When we are told we have to drop all references to userptr, wait for any
barriers required for unbinding.

<4> [2055.808787] WARNING: CPU: 3 PID: 6239 at mm/mmu_notifier.c:472 __mmu_notifier_invalidate_range_start+0x1f2/0x250
<4> [2055.808792] Modules linked in: vgem mei_hdcp snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel r8169 lpc_ich realtek i915 snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep snd_hda_core pinctrl_broxton snd_pcm pinctrl_intel mei_me intel_lpss_pci mei prime_numbers [last unloaded: vgem]
<4> [2055.808834] CPU: 3 PID: 6239 Comm: gem_userptr_bli Tainted: G     U            5.5.0-rc1-CI-CI_DRM_7522+ #1
<4> [2055.808839] Hardware name:  /NUC6CAYB, BIOS AYAPLCEL.86A.0049.2018.0508.1356 05/08/2018
<4> [2055.808847] RIP: 0010:__mmu_notifier_invalidate_range_start+0x1f2/0x250
<4> [2055.808853] Code: c2 48 c7 c7 70 17 2e 82 44 89 45 d4 48 8b 70 28 e8 ec 01 ef ff 41 f6 46 20 01 44 8b 45 d4 75 0a 41 83 f8 f5 44 89 7d d4 74 89 <0f> 0b 44 89 45 d4 eb 81 0f 0b 49 8b 46 18 49 8b 76 10 4c 89 ff 48
<4> [2055.808858] RSP: 0018:ffffc90002937d40 EFLAGS: 00010202
<4> [2055.808865] RAX: 0000000000000061 RBX: ffff8882703a33e0 RCX: 0000000000000001
<4> [2055.808870] RDX: 0000000000000000 RSI: ffff888277da8cb8 RDI: 00000000ffffffff
<4> [2055.808874] RBP: ffffc90002937d70 R08: 00000000fffffff5 R09: 0000000000000000
<4> [2055.808879] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
<4> [2055.808884] R13: ffffffff822e1716 R14: ffffc90002937d80 R15: 00000000fffffff5
<4> [2055.808890] FS:  00007fda75004e40(0000) GS:ffff888277d80000(0000) knlGS:0000000000000000
<4> [2055.808895] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [2055.808900] CR2: 000055ad72ec3000 CR3: 00000002697b2000 CR4: 00000000003406e0
<4> [2055.808904] Call Trace:
<4> [2055.808920]  unmap_vmas+0x13e/0x150
<4> [2055.808937]  unmap_region+0xa3/0x100
<4> [2055.808964]  __do_munmap+0x26d/0x490
<4> [2055.808980]  __vm_munmap+0x66/0xc0
<4> [2055.808994]  __x64_sys_munmap+0x12/0x20
<4> [2055.809001]  do_syscall_64+0x4f/0x220

Closes: https://gitlab.freedesktop.org/drm/intel/issues/771
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210133719.3874455-1-chris@chris-wilson.co.uk

drm/i915/gt: Check we are the Ironlake IPS provider before deregistering

Check that we own the global pointer before deregistering.

Reported-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210153620.3929372-1-chris@chris-wilson.co.uk

drm/i915: Improve execbuf debug

Convert i915_gem_check_execbuffer to return the error code instead of
a boolean so our neat EINVAL debugging trick works within this function.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191209122314.16289-1-tvrtko.ursulin@linux.intel.com

drm/i915: Copy across scheduler behaviour flags across submit fences

We want the bonded request to have the same scheduler properties as its
master so that it is placed at the same depth in the queue. For example,
consider we have requests A, B and B', where B & B' are a bonded pair to
run in parallel on two engines.

A -> B
           \- B'

B will run after A and so may be scheduled on an idle engine and wait on
A using a semaphore. B' sees B being executed and so enters the queue on
the same engine as A. As B' did not inherit the semaphore-chain from B,
it may have higher precedence than A and so preempts execution. However,
B' then sits on a semaphore waiting for B, who is waiting for A, who is
blocked by B.

Ergo B' needs to inherit the scheduler properties from B (i.e. the
semaphore chain) so that it is scheduled with the same priority as B and
will not be executed ahead of Bs dependencies.

Furthermore, to prevent the priorities changing via the expose fence on
B', we need to couple in the dependencies for PI. This requires us to
relax our sanity-checks that dependencies are strictly in order.

v2: Synchronise (B, B') execution on all platforms, regardless of using
a scheduler, any no-op syncs should be elided.

Fixes: ee1136908e9b ("drm/i915/execlists: Virtual engine bonding")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/464
Testcase: igt/gem_exec_balancer/bonded-chain
Testcase: igt/gem_exec_balancer/bonded-semaphore
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210151332.3902215-1-chris@chris-wilson.co.uk

drm/i915/dsb: Fix in mmio offset calculation of DSB instance

As the current usage is restricted to first DSB instance per pipe, so
existing code could not catch the issue to calculate the mmio offset
of different DSB instance per pipe. Corrected the offset calculation.

Fixes: a6e58d9a2e04 ("drm/i915/dsb: Check DSB engine status.")
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205123513.22603-1-animesh.manna@intel.com

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kernel.org/r/20191210093957.5120f717@canb.auug.org.au

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915/dsi: add support for DSC

Enable DSC for DSI, if specified in VBT.

This still lacks DSC aware get config implementation, and therefore
state checker will fail. Also mode valid is not there yet.

v5:
- add dsc get config call

v4:
- convert_rgb = true (Vandita)
- ignore max cdclock check (Vandita)
- rename pipe_config to crtc_state

v3:
- take compressed bpp into account

v2:
- Nuke conn_state->max_requested_bpc, it's not used on DSI

Bspec: 49263
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e0136299e03c582238523189f6951eeb08daed98.1575974743.git.jani.nikula@intel.com

drm/i915/dsi: Fix state mismatch warns for horizontal timings with DSC

When DSC is enabled consider the compression ratio that was used during
horizontal timing calculations.

This may still lead to warns due to rounding errors in the round-trip.

v2 by Jani:
- rebase on top of the more generic dsc state readout

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c2481aaf67ea396aa4698cd2d8e23d19ec4f4ecf.1575974743.git.jani.nikula@intel.com

drm/i915/dsi: account for DSC in horizontal timings

When DSC is enabled, we need to adjust the horizontal timings to account
for the compressed (and therefore reduced) link speed.

The compressed frequency ratio simplifies down to the ratio between
compressed and non-compressed bpp.

Bspec: 49263
Suggested-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fecebdc2719dd0c78eaf8f4d3225bb185956d7db.1575974743.git.jani.nikula@intel.com

drm/i915/dsi: use compressed pixel format with DSC

When compression is enabled, configure the DSI transcoder to use
compressed format.

Suggested-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0e58022ce5425560b3b31062c41de385a736c8b1.1575974743.git.jani.nikula@intel.com

drm/i915/dsi: take compression into account in afe_clk()

Pass crtc_state to afe_clk() to be able to take compression into account
in the computation. Once we enable compression, that is.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a698780362b8d6955d115ef8bb6cf1f7aabbee00.1575974743.git.jani.nikula@intel.com

drm/i915/dsi: use afe_clk() instead of intel_dsi_bitrate()

We'll be expanding afe_clk() to take DSC into account. Switch to using
it where DSC matters. Which is really everywhere that
intel_dsi_bitrate() is currently used in ICL DSI code.

The functional difference is that we round the result closest instead of
down.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b6c52b320daa8aaa0d79618ce714170f8f04ff67.1575974743.git.jani.nikula@intel.com

drm/i915/dsi: abstract afe_clk calculation

We'll make more use of it in the future.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0341fdc13260625150315b0b57a4227eb766c50f.1575974743.git.jani.nikula@intel.com

drm/i915/dsi: set pipe_bpp on ICL configure config

The ICL DSI pipe_bpp currently comes from
compute_baseline_pipe_bpp(). Fix it.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/191f5c4fa5f4af29d4bf7e30bb35f45ce05b33f0.1575974743.git.jani.nikula@intel.com

drm/i915/dsc: add basic hardware state readout support

Add basic hardware state readout for DSC, and check the most relevant
details in the state checker.

v2:
- check for DSC power before reading its state
- check if source supports DSC at all

As a side effect, this should also get the power domains for the enabled
DSC on takeover, and subsequently disable DSC if it's not needed.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3fb018cf9bd9a4c275aab389b6ec0f2a4e938bb9.1575974743.git.jani.nikula@intel.com

drm/i915/dsc: make DSC source support helper generic

Move intel_dp_source_supports_dsc() from intel_dp.c as
intel_dsc_source_support() in intel_vdsc.c. The DSC source support is
more about DSC than about DP, and will be needed for DP independent
code.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6c9f646090913290fb00efd46a4332421bf95930.1575974743.git.jani.nikula@intel.com

drm/i915/dsc: add support for computing and writing PPS for DSI encoders

Add DSI specific computation and transmission to display of PPS.

With hopes that this approach will work for both DP and DSI encoders.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/461db10b1f4d76625625a9f2b1e3d932fff42799.1575974743.git.jani.nikula@intel.com

drm/i915/dsc: move slice height calculation to encoder

Turns out this isn't compatible with DSI, where we use the value from
VBT. No functional changes.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3dd689688a51daff26088eaf6feac27f8b9f5ebc.1575974743.git.jani.nikula@intel.com

drm/i915/dsc: move DP specific compute params to intel_dp.c

Turns out future DSI specific parameters aren't workable with the
approach of having the encoder specific functions in intel_vdsc.c. Make
intel_dsc_compute_params() a helper that does the encoder independent
parts, and have encoder code call it. Move intel_dsc_dp_compute_params()
to intel_dp.c as intel_dp_dsc_compute_params().

No functional changes.

v2: Rename pipe_config to crtc_state while at it.

Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/620688ec302f7f49cc539c6c1653bfaf6092fce0.1575974743.git.jani.nikula@intel.com

drm/i915/bios: add support for querying DSC details for encoder

Add function for retrieving the DSC data for an encoder.

Initially, this is DSI specific, as DP does not use VBT settings for DSC
at all. It's also not very pretty.

In the future we might have a pointer from encoder to the child device,
which would make the child device list query here so much more sensible.

v3:
- use crtc_state instead of pipe_config
- return true by default from intel_bios_get_dsc_params()
- expand the comment about rc_buffer_block_size and rc_buffer_size

v2:
- make more robust, debug log errors better

Bspec: 29885
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b895c349d964d70e4cad26f12a629ea1898bfcc2.1575974743.git.jani.nikula@intel.com

drm/i915/bios: parse compression parameters block

Check for child devices that specify compression, and store the device
specific compression parameters in the display device data struct for
later use. Warn if compression is requested but not available.

Use fairly rigid checks for compression data for starters. These can be
made more dynamic later.

Log about DSC presence in DDI port parse, though this is not universal
across platforms or port types (DSI).

v2: amended debug logging

Bspec: 29885
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/357d685ba047faf2285138c2f7014a8dee9a12b7.1575974743.git.jani.nikula@intel.com

drm/i915/bios: pass devdata to parse_ddi_port

Allow accessing the parent structure later on. Drop const for allowing
future modification as well.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3318b09aaccbbe141e233ca510d581b421259a2a.1575974743.git.jani.nikula@intel.com

drm/i915/tgl: Program BW_BUDDY registers during display init

Gen12 can improve bandwidth efficiency by pairing up memory requests
with similar addresses.  We need to program the BW_BUDDY1 and BW_BUDDY2
registers according to the memory configuration during display
initialization to take advantage of this capability.

The magic numbers we program here feel like something that could
definitely change on future platforms, so let's use a table-based
programming scheme to make this easy to extend in the future.

v2:
 - Add separate table for Wa_1409767108.  (Stan)
 - Reorder structure reduce size by a word.  Page mask can still be up
   to 28 bits (even though current values are small) so we should keep
   it as a u32, but just using a u8 for DRAM type instead of the actual
   enum type saves space.  (Lucas, Ville)
 - Rename function to tgl_bw_buddy_init() to be more precise about what
   it does.  (Lucas)

Bspec: 49189
Bspec: 49218
Bspec: 52890
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205224848.76712-1-matthew.d.roper@intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>

drm/i915/selftests: fix uninitialized variable sum when summing up values

Currently the variable sum is not uninitialized and hence will cause an
incorrect result in the summation values.  Fix this by initializing
sum to the first item in the summation.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 3c7a44bbbfa7 ("drm/i915/selftests: Perform some basic cycle counting of MI ops")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210143205.338308-1-colin.king@canonical.com

drm/i915/gt: Detect if we miss WaIdleLiteRestore

In order to avoid confusing the HW, we must never submit an empty ring
during lite-restore, that is we should always advance the RING_TAIL
before submitting to stay ahead of the RING_HEAD.

Normally this is prevented by keeping a couple of spare NOPs in the
request->wa_tail so that on resubmission we can advance the tail. This
relies on the request only being resubmitted once, which is the normal
condition as it is seen once for ELSP[1] and then later in ELSP[0]. On
preemption, the requests are unwound and the tail reset back to the
normal end point (as we know the request is incomplete and therefore its
RING_HEAD is even earlier).

However, if this w/a should fail we would try and resubmit the request
with the RING_TAIL already set to the location of this request's wa_tail
potentially causing a GPU hang. We can spot when we do try and
incorrectly resubmit without advancing the RING_TAIL and spare any
embarrassment by forcing the context restore.

In the case of preempt-to-busy, we leave the requests running on the HW
while we unwind. As the ring is still live, we cannot rewind our
rq->tail without forcing a reload so leave it set to rq->wa_tail and
only force a reload if we resubmit after a lite-restore. (Normally, the
forced reload will be a part of the preemption event.)

Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/673
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@kernel.vger.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191209023215.3519970-1-chris@chris-wilson.co.uk

drm/i915/guc: kill the GuC client

We now only use 1 client without any plan to add more. The client is
also only holding information about the WQ and the process desc, so we
can just move those in the intel_guc structure and always use stage_id
0.

v2: fix comment (John)
v3: fix the comment for real, fix kerneldoc

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-4-daniele.ceraolospurio@intel.com

drm/i915/guc: kill doorbell code and selftests

Instead of relying on the workqueue, the upcoming reworked GuC
submission flow will offer the host driver indipendent control over
the execution status of each context submitted to GuC. As part of this,
the doorbell usage model has been reworked, with each doorbell being
paired to a single lrc and a doorbell ring representing new work
available for that specific context. This mechanism, however, limits
the number of contexts that can be registered with GuC to the number of
doorbells, which is an undesired limitation. To avoid this limitation,
we requested the GuC team to also provide a H2G that will allow the host
to notify the GuC of work available for a specified lrc, so we can use
that mechanism instead of relying on the doorbells. We can therefore drop
the doorbell code we currently have, also given the fact that in the
unlikely case we'd want to switch back to using doorbells we'd have to
heavily rework it.
The workqueue will still have a use in the new interface to pass special
commands, so that code has been retained for now.

With the doorbells gone and the GuC client becoming even simpler, the
existing GuC selftests don't give us any meaningful coverage so we can
remove them as well. Some selftests might come with the new code, but
they will look different from what we have now so if doesn't seem worth
it to keep the file around in the meantime.

v2: fix comments and commit message (John)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-3-daniele.ceraolospurio@intel.com

drm/i915/guc: add a helper to allocate and map guc vma

We already have a couple of use-cases in the code and another one will
come in one of the later patches in the series.

v2: use the new function for the CT object as well

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-2-daniele.ceraolospurio@intel.com

drm/i915/guc: Drop leftover preemption code

Remove unused enums and ctx_save_restore_disabled() function, leftover
from the legacy preemption removal.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205220243.27403-1-daniele.ceraolospurio@intel.com

drm/i915/hdcp: Nuke intel_hdcp_transcoder_config()

intel_hdcp_transcoder_config() is clobbering some globally visible
state in .compute_config(). That is a big no no as .compute_config()
is supposed to have no visible side effects when either the commit
fails or it's just a TEST_ONLY commit.

Inline this stuff into intel_hdcp_enable() so that the state only
gets modified when we actually commit the state to the hardware.

Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Fixes: 39e2df090c3c ("drm/i915/hdcp: update current transcoder into intel_hdcp")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-2-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>

drm/i915/fbc: Reallocate cfb if we need more of it

The code assumes we can omit the cfb allocation once fbc
has been enabled once. That's nonsense. Let's try to
reallocate it if we need to.

The code is still a mess, but maybe this is enough to get
fbc going in some cases where it initially underallocates
the cfb and there's no full modeset to fix it up.

Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-15-ville.syrjala@linux.intel.com
Tested-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Enable fbc by default on glk+ once again

Now that we have the glk+ w/a for back to back fbc disable + plane
update in place we can once more enable fbc on glk+ by default.

Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-14-ville.syrjala@linux.intel.com
Tested-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Wait for vblank after FBC disable on glk+

On glk+ the hardware gets confused if we disable FBC while
it's recompressing and we perform a plane update during the
same frame. The result is that top of the screen gets corrupted.

We can avoid that by giving the hardware enough time to finish
the FBC disable before we touch the plane registers. Ie. we need
an extra vblank wait after FBC disable.

v2: Don't do the vblank wait if we never activated FBC in hw

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191128150338.12490-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Start using flip nuke

The hardware automagically nukes the cfb on flip. We can use
that whenever the plane/crtc configuration doesn't change too
much. Let's hook that up.

We'll need this for glk+ since we need to introduce an extra
vblank wait after FBC disable. As we're currently disabling
FBC around all plane updates we'd slow them down by an extra
frame. Not a great user experience when your fps is always
capped at vrefres/2. With flip nuke we don't need the extra
vblank wait.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-12-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Nuke fbc.enabled

fbc.enabled == (fbc.crtc != NULL), so let's just nuke fbc.enabled.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-11-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: s/gen9 && !glk/gen9_bc || bxt/

Replace the 'gen9 && !glk' with the slightly more obvious
'gen9_bc || bxt'.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-10-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Make fence_id optional for i965gm

i965gm no longer needs the fence for scanout so we should be
do what we do for ctg+ and only configure a fence for FBC
when we have one.

In theory this should do nothing atm on account of
intel_fbc_can_activate() requiring the fence, but since
we do this for g4x+ let's do it for i965gm as well. We
may want to relax the requirements at some point and allow
FBC without a fence.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-9-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Store fence_id directly in fbc cache/params

Rather than playing around with vma+flags let's just grab
the fence id from within and stash that directly in the fbc
cache/params.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-8-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Track plane visibility

Currently the code (ab)uses cache->vma to indicate the plane
visibility. I want to nuke that so let's add a dedicated boolean
for this.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-7-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Precompute gen9 cfb stride w/a

Precompute the override cfb stride value so that we can check
it when determining if flip nuke can be used or not.

The hardware has 13 bits for this, so we can shrink the storage
to u16 while at it.

v2: Don't explode when crtc_state->enable_fbc lies to us

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Remove the FBC_RT_BASE setup for ILK/SNB

We don't want to use the FBC hardware render tracking so let's not
enable it. To use the hw tracking properly we'd anyway need to
integrate this into the command submissing path as the register is
context saved, and if rendering happens via the ppgtt we'd have
to configure it with the ppgtt address instead of the ggtt address.
Easier to use software tracking instead.

Note that on pre-ilk we can't actually disable render tracking.
However we can't rely on it because it requires that DSPSURF to
match the render target address, and since we play tricks
with DSPSURF that may not be the case. Hence we shall rely on
software render tracking on all platforms.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-5-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Relocate intel_crtc_active()

Move intel_crtc_active() next to its only remaining
user (pre-g4x wm code).

Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Nuke bogus single pipe fbc1 restriction

Not sure where the single pipe only restriction came for fbc1.
Nothing I can see that would prevent this.

v2: Nuke no_fbc_on_multiple_pipes() too

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/fbc: Disable fbc by default on all glk+

We're missing a workaround in the fbc code for all glk+ platforms
which can cause corruption around the top of the screen. So
enabling fbc by default is a bad idea. I'm not keen to backport
the w/a so let's start by disabling fbc by default on all glk+.
We'll lift the restriction once the w/a is in place.

Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915/perf: Configure OAR for specific context

Gen12 supports saving/restoring render counters per context. Apply OAR
configuration only for the context that is passed in to perf.

v2:
- Fix OACTXCONTROL value to only stop/resume counters.
- Remove gen12_update_reg_state_unlocked as power state is already
  applied by the caller.

v3: (Lionel)
- Move register initialization into the array
- Assume a valid oa_config in enable_metric_set

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206194339.31356-2-umesh.nerlige.ramappa@intel.com

drm/i915/perf: Allow non-privileged access when OA buffer is not sampled

SAMPLE_OA_REPORT enables sampling of OA reports from the OA buffer.
Since reports from OA buffer had system wide visibility, collecting
samples from the OA buffer was a privileged operation on previous
platforms. Prior to TGL, it was also necessary to sample the OA buffer
to normalize reports from MI REPORT PERF COUNT.

TGL has a dedicated OAR unit to sample perf reports for a specific
render context. This removes the necessity to sample OA buffer.

- If not sampling the OA buffer, allow non-privileged access. An earlier
  patch allows the non-privilege access:
  https://patchwork.freedesktop.org/patch/337716/?series=68582&rev=1
- Clear up the path for non-privileged access in this patch

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206194339.31356-1-umesh.nerlige.ramappa@intel.com

drm/i915: Change i915_vma_unbind() to report -EAGAIN on activity

If someone else acquires the i915_vma before we complete our wait and
unbind it, we currently error out with -EBUSY. Use -EAGAIN instead so
that if necessary the caller is prepared to try again.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/683
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191208161252.3015727-2-chris@chris-wilson.co.uk

drm/i915/gem: Avoid rcu_barrier() from shrinker paths

As i915_gem_object_unbind() waits on an rcu_barrier() to flush vm
releases (and destruction of their bound vma), we have to be careful not
to invoke that barrier from beneath the shrinker:

<4> [430.222671] WARNING: possible circular locking dependency detected
<4> [430.222673] 5.4.0-rc8-CI-CI_DRM_7508+ #1 Tainted: G     U
<4> [430.222675] ------------------------------------------------------
<4> [430.222677] gem_pwrite/2317 is trying to acquire lock:
<4> [430.222678] ffffffff82248218 (rcu_state.barrier_mutex){+.+.}, at: rcu_barrier+0x23/0x190
<4> [430.222685]
but task is already holding lock:
<4> [430.222687] ffffffff82263a40 (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part.117+0x0/0x30
<4> [430.222691]
which lock already depends on the new lock.

<4> [430.222693]
the existing dependency chain (in reverse order) is:
<4> [430.222695]
-> #2 (fs_reclaim){+.+.}:
<4> [430.222698]        fs_reclaim_acquire.part.117+0x24/0x30
<4> [430.222702]        kmem_cache_alloc_trace+0x2a/0x2c0
<4> [430.222705]        intel_cpuc_prepare+0x37/0x1a0
<4> [430.222709]        cpuhp_invoke_callback+0x9b/0x9d0
<4> [430.222712]        _cpu_up+0xa2/0x140
<4> [430.222714]        do_cpu_up+0x61/0xa0
<4> [430.222718]        smp_init+0x57/0x96
<4> [430.222722]        kernel_init_freeable+0xac/0x1c7
<4> [430.222725]        kernel_init+0x5/0x100
<4> [430.222728]        ret_from_fork+0x24/0x50
<4> [430.222729]
-> #1 (cpu_hotplug_lock.rw_sem){++++}:
<4> [430.222733]        cpus_read_lock+0x34/0xd0
<4> [430.222734]        rcu_barrier+0xaa/0x190
<4> [430.222736]        kernel_init+0x21/0x100
<4> [430.222737]        ret_from_fork+0x24/0x50
<4> [430.222739]
-> #0 (rcu_state.barrier_mutex){+.+.}:
<4> [430.222742]        __lock_acquire+0x1328/0x15d0
<4> [430.222743]        lock_acquire+0xa7/0x1c0
<4> [430.222746]        __mutex_lock+0x9a/0x9d0
<4> [430.222747]        rcu_barrier+0x23/0x190
<4> [430.222850]        i915_gem_object_unbind+0x264/0x3d0 [i915]
<4> [430.222882]        i915_gem_shrink+0x297/0x5f0 [i915]
<4> [430.222912]        i915_gem_shrink_all+0x38/0x60 [i915]
<4> [430.222934]        i915_drop_caches_set+0x1f0/0x240 [i915]
<4> [430.222938]        simple_attr_write+0xb0/0xd0
<4> [430.222941]        full_proxy_write+0x51/0x80
<4> [430.222943]        vfs_write+0xb9/0x1d0
<4> [430.222944]        ksys_write+0x9f/0xe0
<4> [430.222946]        do_syscall_64+0x4f/0x210
<4> [430.222948]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4> [430.222950]
other info that might help us debug this:

<4> [430.222952] Chain exists of:
  rcu_state.barrier_mutex --> cpu_hotplug_lock.rw_sem --> fs_reclaim

<4> [430.222955]  Possible unsafe locking scenario:

<4> [430.222957]        CPU0                    CPU1
<4> [430.222958]        ----                    ----
<4> [430.222960]   lock(fs_reclaim);
<4> [430.222961]                                lock(cpu_hotplug_lock.rw_sem);
<4> [430.222963]                                lock(fs_reclaim);
<4> [430.222964]   lock(rcu_state.barrier_mutex);
<4> [430.222966]
 *** DEADLOCK ***

<4> [430.222968] 3 locks held by gem_pwrite/2317:
<4> [430.222969]  #0: ffff88849e2d9408 (sb_writers#14){.+.+}, at: vfs_write+0x1a4/0x1d0
<4> [430.222973]  #1: ffff888496976db0 (&attr->mutex){+.+.}, at: simple_attr_write+0x36/0xd0
<4> [430.222976]  #2: ffffffff82263a40 (fs_reclaim){+.+.}, at: fs_reclaim_acquire.part.117+0x0/0x30
<4> [430.222980]
stack backtrace:
<4> [430.222982] CPU: 1 PID: 2317 Comm: gem_pwrite Tainted: G     U            5.4.0-rc8-CI-CI_DRM_7508+ #1
<4> [430.222985] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.R00.2321.A08.1909162051 09/16/2019
<4> [430.222989] Call Trace:
<4> [430.222992]  dump_stack+0x71/0x9b
<4> [430.222995]  check_noncircular+0x19b/0x1c0
<4> [430.222998]  ? __lock_acquire+0x1328/0x15d0
<4> [430.222999]  __lock_acquire+0x1328/0x15d0
<4> [430.223001]  ? mark_held_locks+0x49/0x70
<4> [430.223003]  lock_acquire+0xa7/0x1c0
<4> [430.223005]  ? rcu_barrier+0x23/0x190
<4> [430.223008]  __mutex_lock+0x9a/0x9d0
<4> [430.223009]  ? rcu_barrier+0x23/0x190
<4> [430.223011]  ? rcu_barrier+0x23/0x190
<4> [430.223013]  ? find_held_lock+0x2d/0x90
<4> [430.223045]  ? i915_gem_object_unbind+0x24a/0x3d0 [i915]
<4> [430.223048]  ? rcu_barrier+0x23/0x190
<4> [430.223049]  rcu_barrier+0x23/0x190
<4> [430.223081]  i915_gem_object_unbind+0x264/0x3d0 [i915]
<4> [430.223119]  i915_gem_shrink+0x297/0x5f0 [i915]

Closes: https://gitlab.freedesktop.org/drm/intel/issues/743
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191208161252.3015727-1-chris@chris-wilson.co.uk

drm/i915: Flesh out device_info pretty printer

Include all the number fields for describing the GT, as well as the
current boolean flags, primarily for inclusion in error states.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207182937.2583002-1-chris@chris-wilson.co.uk

drm/i915/gem: Comment on inability to check args.pad for MMAP_OFFSET

Since we didn't check and insist that args.pad must be zero for MMAP_GTT
historically, we cannot insert a check now as old userspace may be
feeding in garbage. As such the lack of check is enshrined into the ABI,
so add a comment to remind us we cannot add the check later.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207222644.2830129-1-chris@chris-wilson.co.uk

Linux 5.5-rc1

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) More jumbo frame fixes in r8169, from Heiner Kallweit.

 2) Fix bpf build in minimal configuration, from Alexei Starovoitov.

 3) Use after free in slcan driver, from Jouni Hogander.

 4) Flower classifier port ranges don't work properly in the HW offload
    case, from Yoshiki Komachi.

 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin.

 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk.

 7) Fix flow dissection in dsa TX path, from Alexander Lobakin.

 8) Stale syncookie timestampe fixes from Guillaume Nault.

[ Did an evil merge to silence a warning introduced by this pull - Linus ]

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  r8169: fix rtl_hw_jumbo_disable for RTL8168evl
  net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add()
  r8169: add missing RX enabling for WoL on RTL8125
  vhost/vsock: accept only packets with the right dst_cid
  net: phy: dp83867: fix hfs boot in rgmii mode
  net: ethernet: ti: cpsw: fix extra rx interrupt
  inet: protect against too small mtu values.
  gre: refetch erspan header from skb->data after pskb_may_pull()
  pppoe: remove redundant BUG_ON() check in pppoe_pernet
  tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()
  tcp: tighten acceptance of ACKs not matching a child socket
  tcp: fix rejected syncookies due to stale timestamps
  lpc_eth: kernel BUG on remove
  tcp: md5: fix potential overestimation of TCP option space
  net: sched: allow indirect blocks to bind to clsact in TC
  net: core: rename indirect block ingress cb function
  net-sysfs: Call dev_hold always in netdev_queue_add_kobject
  net: dsa: fix flow dissection on Tx path
  net/tls: Fix return values to avoid ENOTSUPP
  net: avoid an indirect call in ____sys_recvmsg()
  ...

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "Eleven patches, all in drivers (no core changes) that are either minor
  cleanups or small fixes.

  They were late arriving, but still safe for -rc1"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: MAINTAINERS: Add the linux-scsi mailing list to the ISCSI entry
  scsi: megaraid_sas: Make poll_aen_lock static
  scsi: sd_zbc: Improve report zones error printout
  scsi: qla2xxx: Fix qla2x00_request_irqs() for MSI
  scsi: qla2xxx: unregister ports after GPN_FT failure
  scsi: qla2xxx: fix rports not being mark as lost in sync fabric scan
  scsi: pm80xx: Remove unused include of linux/version.h
  scsi: pm80xx: fix logic to break out of loop when register value is 2 or 3
  scsi: scsi_transport_sas: Fix memory leak when removing devices
  scsi: lpfc: size cpu map by last cpu id set
  scsi: ibmvscsi_tgt: Remove unneeded variable rc

Merge tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Nine cifs/smb3 fixes:

   - one fix for stable (oops during oplock break)

   - two timestamp fixes including important one for updating mtime at
     close to avoid stale metadata caching issue on dirty files (also
     improves perf by using SMB2_CLOSE_FLAG_POSTQUERY_ATTRIB over the
     wire)

   - two fixes for "modefromsid" mount option for file create (now
     allows mode bits to be set more atomically and accurately on create
     by adding "sd_context" on create when modefromsid specified on
     mount)

   - two fixes for multichannel found in testing this week against
     different servers

   - two small cleanup patches"

* tag '5.5-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: improve check for when we send the security descriptor context on create
  smb3: fix mode passed in on create for modetosid mount option
  cifs: fix possible uninitialized access and race on iface_list
  cifs: Fix lookup of SMB connections on multichannel
  smb3: query attributes on file close
  smb3: remove unused flag passed into close functions
  cifs: remove redundant assignment to pointer pneg_ctxt
  fs: cifs: Fix atime update check vs mtime
  CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locks

Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs

Pull misc vfs cleanups from Al Viro:
 "No common topic, just three cleanups".

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make __d_alloc() static
  fs/namespace: add __user to open_tree and move_mount syscalls
  fs/fnctl: fix missing __user in fcntl_rw_hint()

drm/i915/gt: Turn vm off then on again for gen7 mm switch

"Have you tried switching it off and on again?"

Set the size of the mm to 0 to disable all PD cachelines, before
enabling the whole mm again. Let's see if that tricks the TLB into
reloading.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191208143648.2986669-1-chris@chris-wilson.co.uk

Merge tag 'ntb-5.5' of git://github.com/jonmason/ntb

Pull NTB update from Jon Mason:
 "Just a simple patch to add a new Hygon Device ID to the AMD NTB device
  driver"

* tag 'ntb-5.5' of git://github.com/jonmason/ntb:
  NTB: Add Hygon Device ID

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull more input updates from Dmitry Torokhov:

 - fixups for Synaptics RMI4 driver

 - a quirk for Goodinx touchscreen on Teclast tablet

 - a new keycode definition for activating privacy screen feature found
   on a few "enterprise" laptops

 - updates to snvs_pwrkey driver

 - polling uinput device for writing (which is always allowed) now works

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - don't increment rmiaddr for SMBus transfers
  Input: synaptics-rmi4 - re-enable IRQs in f34v7_do_reflash
  Input: goodix - add upside-down quirk for Teclast X89 tablet
  Input: add privacy screen toggle keycode
  Input: uinput - fix returning EPOLLOUT from uinput_poll
  Input: snvs_pwrkey - remove gratuitous NULL initializers
  Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q

Merge tag 'iomap-5.5-merge-14' of git://git./fs/xfs/xfs-linux

Pull iomap fixes from Darrick Wong:
 "Fix a race condition and a use-after-free error:

   - Fix a UAF when reporting writeback errors

   - Fix a race condition when handling page uptodate on fragmented file
     with blocksize < pagesize"

* tag 'iomap-5.5-merge-14' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: stop using ioend after it's been freed in iomap_finish_ioend()
  iomap: fix sub-page uptodate handling

Merge tag 'xfs-5.5-merge-17' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
 "Fix a couple of resource management errors and a hang:

   - fix a crash in the log setup code when log mounting fails

   - fix a hang when allocating space on the realtime device

   - fix a block leak when freeing space on the realtime device"

* tag 'xfs-5.5-merge-17' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix mount failure crash on invalid iclog memory access
  xfs: don't check for AG deadlock for realtime files in bunmapi
  xfs: fix realtime file data space leak

Merge tag 'for-linus-5.5-ofs1' of git://git./linux/kernel/git/hubcap/linux

Pull orangefs update from Mike Marshall:
 "orangefs: posix open permission checking...

  Orangefs has no open, and orangefs checks file permissions on each
  file access. Posix requires that file permissions be checked on open
  and nowhere else. Orangefs-through-the-kernel needs to seem posix
  compliant.

  The VFS opens files, even if the filesystem provides no method. We can
  see if a file was successfully opened for read and or for write by
  looking at file->f_mode.

  When writes are flowing from the page cache, file is no longer
  available. We can trust the VFS to have checked file->f_mode before
  writing to the page cache.

  The mode of a file might change between when it is opened and IO
  commences, or it might be created with an arbitrary mode.

  We'll make sure we don't hit EACCES during the IO stage by using
  UID 0"

[ This is "posixish", but not a great solution in the long run, since a
  proper secure network server shouldn't really trust the client like this.
  But proper and secure POSIX behavior requires an open method and a
  resulting cookie for IO of some kind, or similar.    - Linus ]

* tag 'for-linus-5.5-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: posix open permission checking...

Merge tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
 "This is a relatively quiet cycle for nfsd, mainly various bugfixes.

  Possibly most interesting is Trond's fixes for some callback races
  that were due to my incomplete understanding of rpc client shutdown.
  Unfortunately at the last minute I've started noticing a new
  intermittent failure to send callbacks. As the logic seems basically
  correct, I'm leaving Trond's patches in for now, and hope to find a
  fix in the next week so I don't have to revert those patches"

* tag 'nfsd-5.5' of git://linux-nfs.org/~bfields/linux: (24 commits)
  nfsd: depend on CRYPTO_MD5 for legacy client tracking
  NFSD fixing possible null pointer derefering in copy offload
  nfsd: check for EBUSY from vfs_rmdir/vfs_unink.
  nfsd: Ensure CLONE persists data and metadata changes to the target file
  SUNRPC: Fix backchannel latency metrics
  nfsd: restore NFSv3 ACL support
  nfsd: v4 support requires CRYPTO_SHA256
  nfsd: Fix cld_net->cn_tfm initialization
  lockd: remove __KERNEL__ ifdefs
  sunrpc: remove __KERNEL__ ifdefs
  race in exportfs_decode_fh()
  nfsd: Drop LIST_HEAD where the variable it declares is never used.
  nfsd: document callback_wq serialization of callback code
  nfsd: mark cb path down on unknown errors
  nfsd: Fix races between nfsd4_cb_release() and nfsd4_shutdown_callback()
  nfsd: minor 4.1 callback cleanup
  SUNRPC: Fix svcauth_gss_proxy_init()
  SUNRPC: Trace gssproxy upcall results
  sunrpc: fix crash when cache_head become valid before update
  nfsd: remove private bin2hex implementation
  ...

Merge tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Features:

   - NFSv4.2 now supports cross device offloaded copy (i.e. offloaded
     copy of a file from one source server to a different target
     server).

   - New RDMA tracepoints for debugging congestion control and Local
     Invalidate WRs.

  Bugfixes and cleanups

   - Drop the NFSv4.1 session slot if nfs4_delegreturn_prepare waits for
     layoutreturn

   - Handle bad/dead sessions correctly in nfs41_sequence_process()

   - Various bugfixes to the delegation return operation.

   - Various bugfixes pertaining to delegations that have been revoked.

   - Cleanups to the NFS timespec code to avoid unnecessary conversions
     between timespec and timespec64.

   - Fix unstable RDMA connections after a reconnect

   - Close race between waking an RDMA sender and posting a receive

   - Wake pending RDMA tasks if connection fails

   - Fix MR list corruption, and clean up MR usage

   - Fix another RPCSEC_GSS issue with MIC buffer space"

* tag 'nfs-for-5.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
  SUNRPC: Capture completion of all RPC tasks
  SUNRPC: Fix another issue with MIC buffer space
  NFS4: Trace lock reclaims
  NFS4: Trace state recovery operation
  NFSv4.2 fix memory leak in nfs42_ssc_open
  NFSv4.2 fix kfree in __nfs42_copy_file_range
  NFS: remove duplicated include from nfs4file.c
  NFSv4: Make _nfs42_proc_copy_notify() static
  NFS: Fallocate should use the nfs4_fattr_bitmap
  NFS: Return -ETXTBSY when attempting to write to a swapfile
  fs: nfs: sysfs: Remove NULL check before kfree
  NFS: remove unneeded semicolon
  NFSv4: add declaration of current_stateid
  NFSv4.x: Drop the slot if nfs4_delegreturn_prepare waits for layoutreturn
  NFSv4.x: Handle bad/dead sessions correctly in nfs41_sequence_process()
  nfsv4: Move NFSPROC4_CLNT_COPY_NOTIFY to end of list
  SUNRPC: Avoid RPC delays when exiting suspend
  NFS: Add a tracepoint in nfs_fh_to_dentry()
  NFSv4: Don't retry the GETATTR on old stateid in nfs4_delegreturn_done()
  NFSv4: Handle NFS4ERR_OLD_STATEID in delegreturn
  ...

drm/i915/gtt: Account for preallocation in asserts

Our asserts allow for the PDEs to be allocated concurrently, but we did
not account for the aliasing-ppgtt to be preallocated on top.

Testcase: igt/gem_ppgtt #bsw
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191207221453.2802627-1-chris@chris-wilson.co.uk

smb3: improve check for when we send the security descriptor context on create

We had cases in the previous patch where we were sending the security
descriptor context on SMB3 open (file create) in cases when we hadn't
mounted with with "modefromsid" mount option.

Add check for that mount flag before calling ad_sd_context in
open init.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Merge tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

 - Remove hugepage checks for reserved pfns (Ben Luo)

 - Fix irq-bypass unregister ordering (Jiang Yi)

* tag 'vfio-v5.5-rc1' of git://github.com/awilliam/linux-vfio:
  vfio/pci: call irq_bypass_unregister_producer() before freeing irq
  vfio/type1: remove hugepage checks in is_invalid_reserved_pfn()

Merge tag 'for-linus-5.5b-rc1-tag' of git://git./linux/kernel/git/xen/tip

Pull more xen updates from Juergen Gross:

 - a patch to fix a build warning

 - a cleanup of no longer needed code in the Xen event handling

 - a small series for the Xen grant driver avoiding high order
   allocations and replacing an insane global limit by a per-call one

 - a small series fixing Xen frontend/backend module referencing

* tag 'for-linus-5.5b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen-blkback: allow module to be cleanly unloaded
  xen/xenbus: reference count registered modules
  xen/gntdev: switch from kcalloc() to kvcalloc()
  xen/gntdev: replace global limit of mapped pages by limit per call
  xen/gntdev: remove redundant non-zero check on ret
  xen/events: remove event handling recursion detection