Adrian Schmutzler [Tue, 3 Nov 2020 17:03:01 +0000 (18:03 +0100)]
ath79: remove redundant setup of wmac for ubnt WA devices
Several Ubiquiti WA devices set up &wmac again in their DTS files,
although this is already done in ar9342_ubnt_wa.dtsi.
Fixes: fa3c2676ab0c ("ath79: Add support for Ubiquiti Nanostation AC")
Fixes: cf5a1abe46fc ("ath79: define 2.4GHz radio for nanostation ac loco")
Fixes: 09804da80a99 ("ath79: define 2.4GHz radio for litebeam ac gen2")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Nick Hainke [Sun, 25 Oct 2020 11:58:30 +0000 (12:58 +0100)]
ath79: create DTSI files for ubnt WA 1-/2-port devices
The ar9342 Ubiquiti WA devices appear to only have two different
network setups, based on the number of ethernet ports.
Create DTSI files for them to consolidate duplicate definitions.
Signed-off-by: Nick Hainke <vincent@systemli.org>
[rephrase commit message/title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Nick Hainke [Sun, 25 Oct 2020 14:25:01 +0000 (15:25 +0100)]
ath79: fix nanobeam ac ethernet interface
In 4.14 the delays were not cleared, so setting "rgmii" as phy-mode
did not affect delays set by the bootloader. With 5.4 kernel the
situation changed and the ethernet interface stopped working.
"rgmii" requires rx and tx delays depending on the hardware circuit
and wiring. The mac or the phy can add these delays.
- "rgmii": delays are controlled by the mac
- "rgmii-id": delays are controlled by the phy
More Information in Linux Kernel Tree:
Documentation/devicetree/bindings/net/ethernet-controller.yaml
"rgmii" should be the preferred mode, which allows the mac layer to
turn off the dealys completely if they are not needed. However, the
delays are not set correctly, which causes the ethernet interface
to be broken. Just taking the ethernetpart from the litebeam ac gen2
will fix the issue.
Explained-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Nick Hainke <vincent@systemli.org>
John Crispin [Tue, 3 Nov 2020 16:45:52 +0000 (17:45 +0100)]
rtl838x: remove the swconfig setup from the board.d code
the code currently sets up uci for swconfig which we do not use.
Signed-off-by: John Crispin <john@phrozen.org>
Daniel Golle [Tue, 3 Nov 2020 04:42:32 +0000 (04:42 +0000)]
opkg: clean up and fix performance regression
da9746a libopkg: clean up handling of unresolved dependencies
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Paul Spooren <mail@aparcar.org>
Daniel Golle [Mon, 2 Nov 2020 23:22:26 +0000 (23:22 +0000)]
opkg: fix yet another dependency resolution bug
The previous fix of a fix caused yet another problem leading to
`opkg show-upgradable` ending up in an infinite loop.
Fix that.
Fixes: 4a2b1ff7fb ("opkg: fix dependency resolution")
Reported-by: Huangbin Zhan <zhanhb88@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 2 Nov 2020 20:46:03 +0000 (20:46 +0000)]
opkg: fix dependency resolution
The previous commit broke opkg in a way that it would no longer
include dependencies when installing a package, effectively leading
to broken images and unusable systems.
Fix that by making sure dependencies are still going to be checked.
Also reduce size of struct abstract_pkg as suggested by @jow- while at
it.
Fixes: 1445d333aa ("opkg: bump to git HEAD")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Florian Eckert [Fri, 24 Jul 2020 07:34:41 +0000 (09:34 +0200)]
zram-swap: use new extra_command wrapper
Use new `extra_command` wrapper to fix the alignement.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Florian Eckert [Fri, 24 Jul 2020 07:33:59 +0000 (09:33 +0200)]
dropbear: use new extra_command wrapper
Use new `extra_command` wrapper to fix the alignement.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Florian Eckert [Fri, 24 Jul 2020 07:33:42 +0000 (09:33 +0200)]
ltq-vdsl-app: use new extra_command wrapper
Use new `extra_command` wrapper to fix the alignement.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Florian Eckert [Fri, 24 Jul 2020 07:55:37 +0000 (09:55 +0200)]
ltq-adsl-app: use new extra_command wrapper
Use new `extra_command` wrapper to fix the alignement.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Florian Eckert [Fri, 24 Jul 2020 06:44:03 +0000 (08:44 +0200)]
base-files: fix rc.common help alignment
This commit introduces a new function `extra_command` to better format
the help text without having to calculate the indentation in every startup
script that wants to add a new command. So far it looks weird and is not
formatted correctly on some startup scripts.
After using the new `extra_command` wrapper the alignement looks correctly.
And if the indentation is not sufficient in the future, this can be
changed in the function extra_command at a central location.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Adrian Schmutzler [Mon, 2 Nov 2020 16:33:01 +0000 (17:33 +0100)]
kernel: add disabled CONFIG_IP6_NF_TARGET_MASQUERADE
In kernel commit
adf82accc5f5 ("netfilter: x_tables: merge ip and
ipv6 masquerade modules") the config symbols IP_NF_TARGET_MASQUERADE
and IP6_NF_TARGET_MASQUERADE have been demoted to simple backwards-
compat options for NETFILTER_XT_TARGET_MASQUERADE.
In netfilter.mk, this has already been updated in OpenWrt commit
d1592306cc07 ("netfilter.mk: use CONFIG_NETFILTER_XT_TARGET_MASQUERADE"),
having us use the new config symbol.
However, enabling IP_NF_NAT or IP6_NF_NAT still makes the relevant
legacy options selectable, so we need to disable them in generic
config (and forget about them afterwards).
Since CONFIG_IP_NF_TARGET_MASQUERADE is already present there, this
just adds the missing CONFIG_IP6_NF_TARGET_MASQUERADE.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Mon, 2 Nov 2020 16:27:05 +0000 (17:27 +0100)]
kernel: drop obsolete symbol CONFIG_NF_NAT_IPV6
Kernel has removed the symbols CONFIG_NF_NAT_IPV4 and
CONFIG_NF_NAT_IPV6 in favor of CONFIG_NF_NAT in commit
3bf195ae6037 ("netfilter: nat: merge nf_nat_ipv4,6 into nat core").
This drops the obsolete symbol CONFIG_NF_NAT_IPV6 from generic
config-5.4.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Lech Perczak [Wed, 26 Aug 2020 21:38:25 +0000 (23:38 +0200)]
ath79: ubnt-unifi: make u-boot-env partition read-only
This partition isn't normally modified during boot process. Make it
read-only to prevent accidental overwrite.
If needed this can be overriden with installing kmod-mtd-rw; the same
way as for installing modified U-boot.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Lech Perczak [Wed, 26 Aug 2020 21:35:37 +0000 (23:35 +0200)]
ath79: ubnt-xm: make u-boot-env partition read-only
This partition isn't normally modified during boot process. Make it
read-only to prevent accidental overwrite.
If needed this can be overriden with installing kmod-mtd-rw; the same
way as for installing modified U-boot.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
John Audia [Sun, 1 Nov 2020 16:37:10 +0000 (11:37 -0500)]
kernel: bump 5.4 to 5.4.74
Removed upstreamed patches:
mvebu/patches-5.4
409-phy-marvell-comphy-Convert-internal-SMCC-firmware-re.patch
All modifications made by update_kernel.sh
Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, x86_64
Run-tested: ipq806x/R7800, x86_64, lantiq/Easybox 904 xDSL
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
Tested-by: Curtis Deptuck <curtdept@me.com> [x86_64 build/run]
[added lantiq test report]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Yousong Zhou [Mon, 2 Nov 2020 13:04:24 +0000 (21:04 +0800)]
x86: fix touching bootloader "upgraded" mark
The mount point is "/tmp/boot", the path in the boot partition is
"/boot/grub/upgraded".
Origin of this mark
b9c1cf16 ("x86: add preinit hook for bootloader
upgrade")
Fixes
32f675ca ("x86: fix grub-bios-setup fail during sysupgrade")
Ref: https://bugs.openwrt.org/index.php?do=details&task_id=3140
Reported-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Petr Štetiar [Sun, 1 Nov 2020 13:40:02 +0000 (14:40 +0100)]
scripts: bundle-libraries.sh: fix broken SDK compiler
Recent versions (> 5.33) of `file` report liblto_plugin.so as
executable:
$ file liblto_plugin.so
liblto_plugin.so.0.0.0: ELF 64-bit LSB pie executable ...
Which then leads to improper packaging of the plugin, resulting in the
broken compiler:
configure: checking whether the C compiler works
mips-openwrt-linux-musl/bin/ld: liblto_plugin.so: error loading plugin: liblto_plugin.so: invalid ELF header
As the LTO compiler plugin library is incorrectly packaged as SDK
executable:
$ head -1 ~/staging_dir/toolchain...libexec/gcc/.../liblto_plugin.so
#!/usr/bin/env bash
Fix this by filtering out shared libraries from the patching.
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=
1296868
Acked-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Sun, 1 Nov 2020 16:31:40 +0000 (17:31 +0100)]
sdk: fix missing include directories
It's not possible to compile some applications which are using
`-Werror=missing-include-dirs` compiler flags with the SDK as some
target directories are missing in the SDK tarball:
cc1: error: staging_dir/target/usr/include: No such file or directory [-Werror=missing-include-dirs]
cc1: error: staging_dir/target/include: No such file or directory [-Werror=missing-include-dirs]
Fix this by adding the missing directories in the SDK.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Tue, 3 Mar 2020 11:47:07 +0000 (12:47 +0100)]
scripts/getver.sh: silence rev-list errors
Shallow copies are quite common on CI platforms nowadays, making REBOOT
tag unavailable, thus producing following confusing errors in the build
logs:
fatal: Invalid revision range
ee53a240ac902dc83209008a2671e7fdcf55957a..HEAD
fatal: Invalid revision range
ee53a240ac902dc83209008a2671e7fdcf55957a..
0493d57e04774d47921a7d2014b567455d5dc16b
Signed-off-by: Petr Štetiar <ynezz@true.cz>
John Audia [Sun, 25 Oct 2020 10:54:19 +0000 (06:54 -0400)]
linux-firmware: update to
20201022
git log --pretty=oneline --abbrev-commit
20200918..
20201022
dae4b4c (HEAD -> main, tag:
20201022, origin/master, origin/main, origin/HEAD) Merge branch 'v1.1.5' of https://github.com/irui-wang/linux_fw_vpu_v1.1.5 into main
04f71fe cypress: add Cypress firmware and clm_blob files
4d0755b Merge https://github.com/shahasit/bt-linux-firmware into main
2a262bb Merge https://github.com/shahasit/video-linux-firmware into main
c024640 Merge tag 'iwlwifi-fw-2020-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware into main
09e8cff rtl_bt: Update RTL8821C BT FW to 0xAA6C_A99E
d7904d5 ath10k: add SDIO firmware for QCA9377 WiFi
ecdc272 Merge branch 'dg1_dmc_v2_02' of git://anongit.freedesktop.org/drm/drm-firmware into main
c86361d ice: update package file to 1.3.16.0
76ceac8 mediatek: separate venc service thread
8877322 QCA : Updated firmware file for WCN3991
4f41e9d iwlwifi: update and add new FWs from core56-54 release
346057d iwlwifi: update 3168, 7265D, 8000C and 8265 firmwares
a140ef3 i915: Add DG1 DMC v2.02
a09b728 qcom : updated venus firmware files for v5.4
58d41d0 ice: Add comms package file for Intel E800 series driver
c1bef9e copy-firmware: Always write Link: entries
b95e230 Merge commit '
ad1da95d52f1a9206da3ef52f3484f3b89ec6615' of https://github.com/shahasit/linux-firmware-bt into main
0b884ec amdgpu: update vega20 firmware for 20.40
bca0233 amdgpu: update vega12 firmware for 20.40
8652e02 amdgpu: update vega10 firmware for 20.40
9f46d48 amdgpu: update renoir firmware for 20.40
e667605 amdgpu: update raven2 firmware for 20.40
a487f2f amdgpu: update raven firmware for 20.40
aa7b732 amdgpu: update picasso firmware for 20.40
a18981e amdgpu: update navi14 firmware for 20.40
1696e2e amdgpu: update navi12 firmware for 20.40
6b8a6ea amdgpu: update navi10 firmware for 20.40
5b30b38 linux-firmware: Add new VPDMA firmware 1b8.bin
ad1da95 QCA : Updated firmware files for WCN3991
b78a66c linux-firmware: Update firmware for Cadence MHDP8546 DP bridge
afbfb5f linux-firmware: Update firmware patch for Intel Bluetooth 7265 (D1)
a38b8ed Mellanox: Add new mlxsw_spectrum firmware xx.2008.1312
1487a8a linux-firmware: nvidia: move firmware symlinks to WHENCE
bdd5617 linux-firmware: move i915 firmware symlinks to WHENCE
ab69b57 linux-firmware: move iwlwifi-7265D-10.ucode symlink to WHENCE
49c4ff5 Merge branch 'mrvl-prestera' of https://github.com/PLVision/linux-firmware into main
7a02212 linux-firmware: Update Marvell Switchdev firmware with ABI changes
Signed-off-by: John Audia <graysky@archlinux.us>
Hauke Mehrtens [Sat, 31 Oct 2020 17:20:33 +0000 (18:20 +0100)]
kernel: Activate KERNEL_MIPS_FP_SUPPORT for pistachio target
The pistachio target uses a MIPS CPU with FPU and OpenWrt uses a
toolchain with hard FPU support. MIPS FPU support needs the FPU
emulation code in the kernel.
Fixes: ac5671f46cb4 ("kernel: remove obsolete kernel version switches for 4.19")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 24 Oct 2020 21:34:49 +0000 (23:34 +0200)]
gdb: Disable tests
We do not use the tests or ubsan in our gdb package.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 24 Oct 2020 21:34:18 +0000 (23:34 +0200)]
gdb: Always use system zlib
Instead of using the system zlib when the package is selected and using
the internal zlib if it is not selected in OpenWrt, just activate it
always. This should make the package more deterministic.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 24 Oct 2020 18:21:05 +0000 (20:21 +0200)]
gdb: Update to version 10.1
gdb 10.1 adds many new features for example gdbserver support for
- ARC GNU/Linux
- RISC-V GNU/Linux
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 31 Oct 2020 23:16:22 +0000 (00:16 +0100)]
toolchain: gdb: Remove ARC patches
The ARC specific gdb was removed some time ago.
Fixes: 969690b33c56 ("toolchain/gdb: Don't use gdb-arc")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 24 Oct 2020 21:35:13 +0000 (23:35 +0200)]
toolchain: gdb: Disable tests
Instead of patching the tests out, just remove them with a configure
option.
No files were generates in the testsuite and unit-test directories.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 24 Oct 2020 18:20:54 +0000 (20:20 +0200)]
toolchain: gdb: Update to version 10.1
gdb 10.1 adds many new features for example gdbserver support for
- ARC GNU/Linux
- RISC-V GNU/Linux
Removed this patch, because similar changes are now integrated upstream:
toolchain/gdb/patches/100-no_extern_inline.patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hans Dedecker [Sun, 1 Nov 2020 19:23:04 +0000 (20:23 +0100)]
odhcpd: fix compile problem on 64-bit systems
735c783 dhcpv6: fix size_t fields in syslog format
Fixes
5cdc65f6d1
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
David Bauer [Mon, 26 Oct 2020 20:59:47 +0000 (21:59 +0100)]
ipq40xx: enable RX hash / CTAG TX offloading for single-phy
This re-enables offloading features disabled by
commit
9da2b567605b ("ipq40xx: fix ethernet vlan double tagging").
Single-PHY devices use port-based VLANs on the switch, therefore no
S-TAG magic is involved here. Re-enabling these features restores
throughput back to 950 Mbit/s.
Reported-by: Jannis Pinter <jannis@pinterjann.is>
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Sat, 31 Oct 2020 15:41:04 +0000 (16:41 +0100)]
ath79: use correct firmware name for UniFi AP
The Ubiquiti UniFi AP does not have a AHB connected radio but a PCI one.
Also the EEPROM ist only 0x440 bytes of length.
Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Tested-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Fri, 30 Oct 2020 00:22:47 +0000 (01:22 +0100)]
ath79: remove AT803X config symbol from subtargets
The AT803X_PHY kernel config symbol is already enabled target-wide. SO
it does not have to be enabled for individual subtargets.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Fri, 30 Oct 2020 00:03:09 +0000 (01:03 +0100)]
ath79: drop upstreamed patch
Patch was upstreamed a long time ago (over 2 years) as commit
a08227a206b8d ("MIPS: ath79: select the PINCTRL subsystem").
When porting this patch to a newer kernel, nobody noticed we now patch a
Broadcom platform. This is clearly not intended. So drop this patch and
pretend nothing ever happened.
Signed-off-by: David Bauer <mail@david-bauer.net>
John Audia [Sat, 31 Oct 2020 11:35:12 +0000 (07:35 -0400)]
kernel: bump 5.4 to 5.4.73
Removed upstreamed patches:
generic/pending-5.4
445-mtd-spinand-gigadevice-Only-one-dummy-byte-in-QUA.patch
446-mtd-spinand-gigadevice-Add-QE-Bit.patch
pistachio/patches-5.4
150-pwm-img-Fix-null-pointer-access-in-probe.patch
Manually rebased:
layerscape/patches-5.4
801-audio-0011-Revert-ASoC-fsl_sai-add-of_match-data.patch
801-audio-0039-MLK-16224-6-ASoC-fsl_sai-fix-DSD-suspend-resume.patch
801-audio-0073-MLK-21957-3-ASoC-fsl_sai-add-bitcount-and-timestamp-.patch
820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh.patch
All modifications made by update_kernel.sh
Build system: x86_64
Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711,
mvebu (mamba, rango), x86_64, ramips/mt7621
Run-tested: ipq806x/R7800, mvebu (mamba, rango), x86_64, ramips (RT-AC57U)
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
[alter 820-usb-0009-usb-dwc3-Add-workaround-for-host-mode-VBUS-glitch-wh]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Hans Dedecker [Sat, 31 Oct 2020 20:23:45 +0000 (21:23 +0100)]
odhcpd: update to latest git HEAD
5700919 dhcpv6: add explicit dhcpv4o6 server address
e4f4e62 dhcpv6: add DHCPv4-over-DHCPv6 support
aff290b dhcpv6: check message type
2677fa1 router: fix advertisement interval option
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Rui Salvaterra [Sat, 31 Oct 2020 11:59:48 +0000 (11:59 +0000)]
hostapd: enable OWE for the basic-{openssl, wolfssl} variants
Opportunistic Wireless Encryption is needed to create/access encrypted networks
which don't require authentication.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Daniel Golle [Sat, 31 Oct 2020 00:06:53 +0000 (00:06 +0000)]
libselinux: remove dependency on musl-fts for non-musl builds
Suggested-by: Curtis Deptuck <curtdept@users.noreply.github.com>
Tested-by: Curtis Deptuck <curtdept@users.noreply.github.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Adrian Schmutzler [Thu, 1 Oct 2020 15:02:47 +0000 (17:02 +0200)]
target: remove obsolete kernel version switches for 4.19
This removes unneeded kernel version switches from the targets after
kernel 4.19 has been dropped.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Thu, 1 Oct 2020 14:47:34 +0000 (16:47 +0200)]
kernel: remove obsolete kernel version switches for 4.19
This removes switches dependent on kernel version 4.19 as well as
several packages/modules selected only for that version.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 9 Oct 2020 19:53:35 +0000 (21:53 +0200)]
kernel: remove support for kernel 4.19
We use 5.4 on all targets by default, and 4.19 has never been released
in a stable version. There is no reason to keep it.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Johannes Kimmel [Thu, 29 Oct 2020 10:07:38 +0000 (11:07 +0100)]
octeon: disable edgerouter image
This patch disables the image for edgerouter devices by default, since
it isn't able to boot at the moment.
Currently the edgerouter image won't boot. Current kernels have an
option CONFIG_CAVIUM_CN63XXP1 that needs to be enabled for this chip.
If the kernel was compiled without this option, following message is
displayed and the machine reboots:
[ 36.778028] Kernel panic - not syncing: OCTEON II DCache prefetch workaround not in place (
cfa0000c).
[ 36.778028] Please build kernel with proper options (CONFIG_CAVIUM_CN63XXP1).
[ 36.794398] Rebooting in 1 seconds..
This was last confirmed on 2020-10-29.
The description of this option states, that enabling it will possibly
cause performance issues on other chips.
Signed-off-by: Johannes Kimmel <fff@bareminimum.eu>
Adrian Schmutzler [Mon, 26 Oct 2020 19:41:02 +0000 (20:41 +0100)]
image: drop obsolete legacy image recipes
LegacyDevice is not used anymore in our tree, so let's drop it
together with the relevant definitions and recipes.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Fri, 30 Oct 2020 18:21:37 +0000 (19:21 +0100)]
image: sort image-commands.mk alphabetically
The definitions in image-commands.mk seem to have no particular
order. Sort them alphabetically to make it easier to actually
find anything there. No other changes made beyond moving entire
blocks.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Mon, 26 Oct 2020 19:39:47 +0000 (20:39 +0100)]
image: drop combined-image build recipe
Build/combined-image is only used in ath25 target, and that defines
its own version. Thus, drop the unused definition in image-commands.mk.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Mon, 26 Oct 2020 19:37:43 +0000 (20:37 +0100)]
image: drop unused legacy NAND build recipes
This drops unused legacy recipes Image/Build/SysupgradeNAND and
Image/Build/UbinizeImage.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Daniel Golle [Fri, 30 Oct 2020 15:45:42 +0000 (15:45 +0000)]
kernel: move kmod-i2c-bcm-iproc to I2C menu
A typo resulted in that module having it's own menu.
Move it into the I2C menu as it was most likely intended.
Fixes: 1291274335 ("kernel: package bcm53xx i2c module")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Fri, 30 Oct 2020 01:37:54 +0000 (01:37 +0000)]
Revert "kmod-nft-reject: Fix for "nft_reject_ipv4.ko missing" warning"
This reverts commit
7f94e2afcf090f751c9f7f7ea46e8ef8d93ee84b.
Package kmod-nft-core is missing dependencies for the following libraries:
nft_reject.ko
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Jo-Philipp Wich [Thu, 10 Sep 2020 12:54:49 +0000 (14:54 +0200)]
rules.mk: simplify FAKEROOT command line
Since fakeroot is patched to discover related ressources relative to the
STAGING_DIR_HOST environment variable, there is no need to pass the path
to faked or the preload library manually anymore.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Thu, 10 Sep 2020 12:52:31 +0000 (14:52 +0200)]
fakeroot: make fakeroot script relocatable
Patch the fakeroot script template to discover faked and libfakeroot.so
relative to the STAGING_DIR_HOST environment variable, similar to how it
is done for automake, libtool, quilt and autoconf already.
This avoids the need for passing the paths to faked and libfakeroot.so
manually every time we invoke fakeroot and subsequently allows us to
drop OS X specific logic.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Paul Spooren [Sat, 17 Oct 2020 20:06:03 +0000 (10:06 -1000)]
build,IB: reload packages/ only if existing
With the fix of external kmod feeds it is possible to ship the
ImageBuilder without any packages except the pseudo packages kernel and
libc. Therefore the local package feeds becomes optional.
This commit adds a check to the package_reload function to only run if
the local feed is existing.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Paul Spooren [Tue, 15 Sep 2020 22:44:36 +0000 (12:44 -1000)]
build,IB: include kmods only in local builds
The buildbots generate a kmod archive which should be used instead of a
local copy. This is possible due to the introduction of a kernelversion
specific feed.
This commit adds the ability of using only signed package feeds.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Paul Spooren [Tue, 15 Sep 2020 22:33:46 +0000 (12:33 -1000)]
build: FeedSourcesAppend add kmod feed to snapshot
Nightly snapshot builds of OpenWrt change their kernels versions
frequently and lose thereby compatibility to kmods from the upstream
target specific packages feed.
To allow opkg to install packages over multiple days a kmod archive is
offered at $target/$subtarget/kmods/$kernelversion and added as a feed
to created snapshot images via a buildbot step[1].
Instead of using a buildstep add the kmod feed directly via
FeedSourcesAppend to be included in the ImageBuilder repositories.conf
as well. This is conditionally only done for SNAPSHOT builds and when
running as BUILDBOT. Releases are unaffected as they don't include
kernel version changes and local builds may use different kernel
versions or magics than available upstream.
This commit allows in a future step to ship ImageBuilders without a
locally stored kmod archive.
[1]: https://git.openwrt.org/?p=buildbot.git;a=blob;f=phase1/master.cfg;h=
3ba7a1606e89b095b10555e703ea96e93295deec;hb=HEAD#l1025
Signed-off-by: Paul Spooren <mail@aparcar.org>
Philip Prindeville [Tue, 21 Apr 2020 08:29:51 +0000 (02:29 -0600)]
kmod-nft-reject: Fix for "nft_reject_ipv4.ko missing" warning
Seeing the following:
ERROR: module '/home/philipp/lede/build_dir/target-x86_64_musl/linux-x86_64/linux-5.4.33/net/ipv4/netfilter/nft_reject_ipv4.ko' is missing.
modules/netfilter.mk:1068: recipe for target '/home/philipp/lede/bin/targets/x86/64/packages/kmod-nft-core_5.4.33-1_x86_64.ipk' failed
make[3]: *** [/home/philipp/lede/bin/targets/x86/64/packages/kmod-nft-core_5.4.33-1_x86_64.ipk] Error 1
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Daniel Golle [Thu, 29 Oct 2020 12:50:47 +0000 (12:50 +0000)]
hostapd: remove hostapd-hs20 variant
Hotspot 2.0 AP features have been made available in the -full variants
of hostapd and wpad. Hence we no longer need a seperate package for
that.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rui Salvaterra [Thu, 29 Oct 2020 18:58:37 +0000 (18:58 +0000)]
hostapd: add {hostapd,wpad}-basic-openssl variants
Add OpenSSL-linked basic variants (which provides WPA-PSK only, 802.11r and
802.11w) of both hostapd and wpad. For people who don't need the full hostapd
but are stuck with libopenssl for other reasons, this saves space by avoiding
the need of an additional library (or a larger hostapd with built-in crypto).
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Daniel Golle [Fri, 30 Oct 2020 00:19:29 +0000 (00:19 +0000)]
opkg: bump to git HEAD
8769c75 pkg_hash: don't suggest incompatible packages
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
John Thomson [Thu, 15 Oct 2020 09:27:55 +0000 (19:27 +1000)]
ath79: mikrotik: use vmlinuz (zBoot ELF)
- minimal built initramfs: 10MB vmlinux ELF -> 6MB vmlinuz
- ~5 seconds for kernel decompression, which was equivalent to the
additional time to load the uncompressed ELF from SPI NOR.
- Removes requirement for lzma-loader, which may have been causing some
image builds to fail to boot on Mikrotik mt7621.
Suggested-by: Thibaut VARÈNE <hacks@slashdirt.org>
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
John Thomson [Thu, 15 Oct 2020 09:27:55 +0000 (19:27 +1000)]
mt7621: mikrotik: use vmlinuz (zBoot ELF)
- minimal built initramfs: 11MB vmlinux ELF -> 4.5MB vmlinuz
- ~5 seconds for kernel decompression, which was equivalent to the
additional time to load the uncompressed ELF from SPI NOR.
- Removes requirement for lzma-loader, which may have been causing some
image builds to fail to boot on Mikrotik mt7621.
Fixes: FS#3354
Suggested-by: Thibaut VARÈNE <hacks@slashdirt.org>
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
John Thomson [Thu, 15 Oct 2020 09:06:41 +0000 (19:06 +1000)]
build: image: add append-dtb-elf helper
The mips kernel vmlinux image supports adding an empty ELF section
for DTB to be later inserted into with MIPS_ELF_APPENDED_DTB.
This ELF + inserted DTB image can then be directly booted on some
devices.
Example usage:
image/subtarget.mk:
KERNEL_NAME := vmlinux.elf
KERNEL_INITRAMFS_NAME := vmlinux-initramfs.elf
KERNEL := kernel-bin | append-dtb-elf
On mt7621 memory size needed to be manually specified.
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Chuanhong Guo [Thu, 29 Oct 2020 13:22:57 +0000 (21:22 +0800)]
kernel: mips: zboot: put appended dtb into a section
This will make a separated section for dtb appear in ELF, and we can
then use objcopy to patch a dtb into vmlinuz when RAW_APPENDED_DTB
is set in kernel config.
command to patch a dtb:
objcopy --set-section-flags=.appended_dtb=alloc,contents \
--update-section=.appended_dtb=<target>.dtb vmlinuz vmlinuz-dtb
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Wed, 14 Oct 2020 13:17:56 +0000 (21:17 +0800)]
ramips: add linux zboot support
linux-mips has zboot code which can create a self-extracting kernel
image.
This allows enabling kernel zboot support for ramips targets.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
David Bauer [Wed, 28 Oct 2020 02:17:11 +0000 (03:17 +0100)]
hostapd: wpas: add missing config symbols
This adds missing config symbols for interworking as well as Hotspot 2.0
to the wpa_supplicant-full configuration.
These symbols were added to the hostapd-full configuration prior to this
commit. Without adding them to the wpa_supplicant configuration,
building of wpad-full fails.
Thanks to Rene for reaching out on IRC.
Fixes: commit be9694aaa297 ("hostapd: add UCI support for Hotspot 2.0")
Fixes: commit 838b412cb527 ("hostapd: add interworking support")
Signed-off-by: David Bauer <mail@david-bauer.net>
Daniel Golle [Wed, 28 Oct 2020 01:56:16 +0000 (01:56 +0000)]
dnsmasq: install /etc/hotplug.d/ntp/25-dnsmasqsec world-readable
/etc/hotplug.d/ntp/25-dnsmasqsec is being sourced by /sbin/hotplug-call
running as ntpd user. For that to work the file needs to be readable by
that user.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Sven Eckelmann [Thu, 22 Oct 2020 08:52:08 +0000 (10:52 +0200)]
mac80211: Fix wpa_supplicant config removal ubus call
If mac80211_setup_supplicant() is called with enabled=0 then it should just
destroy the interface and remove the configuration from wpa_supplicant. But
the ubus method call always returned
Command failed: Method not found
because the actual name of the method is "config_remove".
Fixes: b5516603dd90 ("mac80211: more wifi reconf related fixes")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
[bump PKG_RELEASE]
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Tue, 27 Oct 2020 23:09:34 +0000 (00:09 +0100)]
hostapd: bump PKG_RELEASE
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Mon, 19 Oct 2020 00:29:47 +0000 (02:29 +0200)]
hostapd: add interworking support
This adds configuration options to enable interworking for hostapd.
All options require iw_enabled to be set to 1 for a given VAP.
All IEEE802.11u related settings are supported with exception of the
venue information which will be added as separate UCI sections at a
later point.
The options use the same name as the ones from the hostapd.conf file
with a "iw_" prefix added.
All UCI configuration options are passed without further modifications
to hostapd with exceptions of the following options, whose elements can
be provided using UCI lis elements:
- iw_roaming_consortium
- iw_anqp_elem
- iw_nai_realm
- iw_domain_name
- iw_anqp_3gpp_cell_net
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Sun, 18 Oct 2020 21:09:09 +0000 (23:09 +0200)]
hostapd: add FTM responder support
This adds support for enabling the FTM responder flag for the APs
extended capabilities. On supported hardware, enabling the ftm_responder
config key for a given AP will enable the FTM responder bit.
FTM support itself is unconditionally implemented in the devices
firmware (ath10k 2nd generation with 3.2.1.1 firmware). There's
currently no softmac implementation.
Also allow to configure LCI and civic location information which can be
transmitted to a FTM initiator.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Mon, 19 Oct 2020 17:36:56 +0000 (19:36 +0200)]
mac80211: pass phy name to hostapd_set_bss_options
hostapd_set_bss_options expects the PHY as second and the VIF as third
argument. However, only the VIF was passed as second argument without a
third argument at all.
This was never a problem, as both PHY and VIF were never accessed.
However, with FTM support the PHY is needed to determine the HW support
when configuring the BSS.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Sun, 18 Oct 2020 23:21:23 +0000 (01:21 +0200)]
hostapd: remove ieee80211v option
Remove the ieee80211v option. It previously was required to be enabled
in order to use time_advertisement, time_zone, wnm_sleep_mode and
bss_transition, however it didn't enable any of these options by default.
Remove it, as configuring these options independently is enough.
This change does not influence the behavior of any already configured
setting.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Sun, 18 Oct 2020 20:35:31 +0000 (22:35 +0200)]
hostapd: make rrm report independent of ieee80211k setting
Allow to configure both RRM beacon as well as neighbor reports
independently and only enable them by default in case the ieee80211k
config option is set.
Signed-off-by: David Bauer <mail@david-bauer.net>
Petr Štetiar [Tue, 27 Oct 2020 21:56:35 +0000 (22:56 +0100)]
uci: fix package mirror hash
I've forget to update PKG_MIRROR_HASH in my previous package version
bump.
Fixes: 095cc2b7454a ("uci: update to version 2020-10-06")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Mon, 26 Oct 2020 07:35:01 +0000 (08:35 +0100)]
umdns: update to version 2020-10-26
59e4fc98162d cache: cache_answer: fix off by one
4cece9cc7db4 cache: cache_record_find: fix buffer overflow
be687257ee0b cmake: tests: provide umdns-san binary
bf01f2dd0089 tests: add dns_handle_packet_file tool
134afc728846 tests: add libFuzzer based fuzzing
de08a2c71ca8 cmake: create static library
cdc18fbb3ea8 interface: fix possible null pointer dereference
1fa034c65cb6 interface: fix value stored to 'fd' is never read
3a67ebe3fc66 Add initial GitLab CI support
50caea125517 cmake: fix include dirs and libs lookup
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Tue, 6 Oct 2020 07:34:24 +0000 (09:34 +0200)]
uci: update to version 2020-10-06
52bbc99f69ea Replace malloc() + memset() with calloc()
3fbd6c923434 ucimap: Check return of malloc()
eae126f66663 file: Check buffer size after strtok()
7f574273180a file: use size_t for position and pointer
19770b6949b9 file: use dynamic memory allocation for tempfile name
aa46546794ac file: uci_file_commit: fix memory leak
671c7554bfde uci: silence UBSAN error by using offsetof macro from compiler
ea5bbd57d0e1 tests: cram: add uci import testing on fuzzer corpus
31f78bfbf75f cmake: add uci-san cli built with clang sanitizers
a3e650911f5e file: uci_parse_package: fix heap use after free
9bd361ca3236 tests: add libFuzzer based fuzzing
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Nuno Goncalves [Thu, 13 Aug 2020 22:26:13 +0000 (23:26 +0100)]
ramips: add support for Wavlink WL-WN530HG4
Same hardware as Phicomm K2G but different flash layout.
Specification:
- SoC: MediaTek MT7620A
- Flash: 8 MB
- RAM: 64 MB
- Ethernet: 4 FE ports and 1 GE port (RTL8211F on port 5)
- Wireless radio: MT7620 for 2.4G and MT7612E for 5G, both equipped
with external PA.
- UART: 1 x UART on PCB - 57600 8N1
Flash instruction:
To avoid requiring UART for TFTP a dual flash procedure is suggested
to install the squashfs image:
1. Rename openwrt-ramips-mt7620-wavlink_wl-wn530hg4-initramfs-kernel.bin
to WN530HG4-WAVLINK.
2. Flash this file with the factory web interface.
3. With OpenWRT now running use standard sysupgrade to install the
squashfs image.
Signed-off-by: Nuno Goncalves <nunojpg@gmail.com>
[remove dts-v1, remove model from LED labels, wrap commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tony Ambardar [Sun, 16 Aug 2020 20:07:30 +0000 (13:07 -0700)]
malta: relocate CPU_TYPE setting to subtarget makefiles
Move CPU_TYPE:=24kc (32-bit) from the top-level target makefile to the
be/le subtarget makefiles, which is consistent with the 64-bit subtargets.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Leon Maurice Adam [Sun, 3 May 2020 10:44:24 +0000 (12:44 +0200)]
lantiq: add support for AVM FRITZ!Box 7430
Hardware:
- SoC: Lantiq VRX 220
- CPU: 2x MIPS 34Kc 500 MHz
- RAM: 128 MiB 250 MHz
- Flash: 128 MiB NAND
- Ethernet: Built-in Fast Ethernet switch, 4 ports used
- Wifi: Atheros AR9381-AL1A b/g/n with 2 pcb/internal and 1 external antennas
- USB: 1x USB 2.0
- DSL: Built-in A/VDSL2 modem
- DECT: Dialog SC14441
- LEDs: 1 two-color, 4 one-color
- Buttons: 1x DECT, 1x WIFI
- Telephone connectors: 1 FXS port via TAE or RJ11 connector
With the exception of FXS/DECT everything works
(there are no drivers for AVM's FXS or DECT implementation),
DSL is yet untested.
Installation:
Boot up the device and wait a few seconds. Run the eva_ramboot.py script
in scripts/flashing/ to load the initramfs image on the device:
$ ./scripts/flashing/eva_ramboot.py 192.168.178.1 <path to your initramfs image>
If the script fails to reach the device, maybe try 169.254.120.1.
Wait until booting is complete. You should now be able to reach your device
under the default ip address 192.168.1.1.
Before flashing, check if linux_fs_start is not set to 1 in the tffs partition:
$ fritz_tffs_nand -d /dev/mtd1 -n linux_fs_start
If linux_fs_start is 1, you will need to reset it to 0, either by FTP,
upgrading FritzOS or doing a recovery.
Now you should be able to flash the device using sysupgrade.
Signed-off-by: Leon Maurice Adam <leon.adam@aol.de>
Acked-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
[drop BOARD_NAME, use wpad-basic-wolfssl, drop 4.19, drop dts-v1,
remove model prefix from LED names]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Tue, 27 Oct 2020 12:33:21 +0000 (13:33 +0100)]
lantiq: fix indent in vr9_avm_fritz7412.dts
Indent should be tabs.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Sun, 4 Oct 2020 16:00:28 +0000 (18:00 +0200)]
bcm63xx: reorganize board patches into fewer files
At the moment, bcm63xx creates one patch for each board to add to
board_bcm963xx.c. While this is not really helpful to get an overview
in the first place, it is particularly painful if you want to change
something for an early file and have to refresh all the later patches
accordingly.
Since it does not look like these board patches are upstreamed either,
this commit consolidates all board additions into one patch per "board".
By this, both adding and editing boards should become much simpler,
and we drop about 1300 lines of "code" from patches as well.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Sat, 17 Oct 2020 12:00:54 +0000 (14:00 +0200)]
ath79: enable upgrade from ar71xx for Qxwlan devices
This supports upgrade from ar71xx for the recently added Qxwlan
devices
E1700AC v2, E558 v2, E750A v4 and E750G v8.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Roman Kuzmitskii [Thu, 22 Oct 2020 18:31:07 +0000 (18:31 +0000)]
octeon: use dedicated function to move config backup
All octeon devices use the same or a very similar way to backup
and restore configuration.
We expect to have more devices added and in order to stop
repeating ourselves move the logic to a separate function.
While at it, add a few checks.
Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
[commit message facelift]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Joel Johnson [Fri, 21 Aug 2020 14:32:00 +0000 (08:32 -0600)]
dnsmasq: include IPv6 local nameserver entry
For IPv6 native connections when using IPv6 DNS lookups, there is no
valid default resolver if ignoring WAN DHCP provided nameservers.
This uses a runtime check to determine if IPv6 is supported on the host.
Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Felix Fietkau [Mon, 19 Oct 2020 09:28:29 +0000 (11:28 +0200)]
sdk: keep the linux package in the same subdir as in the main build system
Fixes: 953435795d17 ("build: always build package/kernel/linux")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Nick Hainke [Sat, 24 Oct 2020 22:52:47 +0000 (00:52 +0200)]
ath79: fix block protection clearing
The block protection bits of macronix do not match the implementation.
The chip has 3 BP bits. Bit 5 is actually the third BP but here the
5th bit is SR_TB. Therefore the patch adds SR_TB to the mask. In the
4.19er kernel the whole register was simply set to 0.
The wrong implementation did not remove the block protection. This led
to jffs2 errors in the form of:
"jffs2: Newly-erased block contained word 0x19852003 at offset 0x..."
This caused inconsistent memory and other errors.
Suggested-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Yangbo Lu [Thu, 15 Oct 2020 08:56:10 +0000 (16:56 +0800)]
layerscape: several kernel fix-ups from NXP linux factory
NXP linux factory unifies one linux kernel for i.MX, Layerscape and
S32 platforms. It provides a common code base for their SDKs.
Add several kernel patches for bug fix from linux factory last release.
Git: https://source.codeaurora.org/external/qoriq/qoriq-components/linux
Tag: LTS-5.4.47-
20200828
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Biwen Li [Thu, 6 Aug 2020 07:41:39 +0000 (07:41 +0000)]
layerscape: update tfa to LSDK-20.04-update-290520
Update tfa to LSDK-20.04-update-290520.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
[fix PKG_RELEASE bump]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Biwen Li [Thu, 6 Aug 2020 07:37:05 +0000 (07:37 +0000)]
layerscape: update u-boot to LSDK-20.04-update-290520
Update u-boot to LSDK-20.04-update-290520.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
[fix PKG_RELEASE bump]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Biwen Li [Thu, 6 Aug 2020 07:14:15 +0000 (07:14 +0000)]
layerscape: update ls-rcw to LSDK-20.04-update-290520
Update ls-rcw to LSDK-20.04-update-290520.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
[rebase, fix PKG_RELEASE change]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Biwen Li [Thu, 6 Aug 2020 06:49:00 +0000 (06:49 +0000)]
layerscape: update kernel to LSDK-20.04-V5.4-update-290520
Update kernel from LSDK-20.04-V5.4 to LSDK-20.04-V5.4-update-290520.
Only two patches added for Layerscape.
LSDK kernel link
https://source.codeaurora.org/external/qoriq/qoriq-components/linux/
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Adrian Schmutzler [Sun, 25 Oct 2020 16:58:49 +0000 (17:58 +0100)]
layerscape: harmonize wrapping for IMAGE/* definitions
Always keep the first line empty for multi-line IMAGE/* definitions.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Sun, 25 Oct 2020 16:53:53 +0000 (17:53 +0100)]
layerscape: create shared definitions for sdboot devices
This moves a few shared variables for SD-Boot devices into common
definitions in order to reduce duplicate code.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Pawel Dembicki [Mon, 24 Aug 2020 12:29:32 +0000 (14:29 +0200)]
layerscape: Change to combined rootfs on sd images
At this moment layerscape images are ext4 only. It causes problem with
save changes durring sysupgrade and make "firstboot" and failsafe mode
useless.
This patch changes sd-card images to squashfs + f2fs combined images.
To make place, for saving config, kernel space ar now ext4 partition
with fit kernel.
This method of image generation is similar to rest of OpenWrt sd-card
targets.
Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[reword README, reword DEVICE_COMPAT_MESSAGE, keep original indent]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Pawel Dembicki [Mon, 24 Aug 2020 10:21:19 +0000 (12:21 +0200)]
layerscape: fix platform_copy_config function
At this moment platform_copy_config function is used for every device
and function "export_partdevice" without "export_bootdevice" causes
multiple errors like that:
"sh: 1: unknown operand"
This patch fix usage of export_partdevice and split platform_copy_config
for sd-card images.
Fixes: 0841b68c91d3 ("layerscape: support sysupgrade for SD card ext4
rootfs")
Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Wed, 19 Aug 2020 10:13:26 +0000 (12:13 +0200)]
layerscape: add dtb to sysupgrade
At this moment sysupgrade replaces only kernel and rootfs.
This patch add dtb part to sysupgrade images to avoid situation
when old dtb make system broken.
Is possible to sysupgrade older images for NOR devices:
1. Firmware partition in bootargs need to be updated to:
"49m@0xf00000(firmware)". Env should be saved after changes.
2. After step one, "sysupgrade -F" will work.
Run tested: LS1046A-RDB
Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[bump PKG_RELEASE for uboot-layerscape]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Pawel Dembicki [Thu, 20 Aug 2020 07:28:01 +0000 (09:28 +0200)]
layerscape: fix sd-card sysupgrade
So far, kernel has not been written correctly to SD card during
sysupgrade, as both target path and offset were wrong.
This patch fixes it, and adds some descriptive output on the way.
Fixes: 0841b68c91d3 ("layerscape: support sysupgrade for SD card ext4
rootfs")
Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[alter/extend commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Daniel Golle [Sun, 25 Oct 2020 18:07:19 +0000 (18:07 +0000)]
ubus: bump to git HEAD
ad0cd11 ubusd_acl: add support for wildcard in methods
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 25 Oct 2020 17:24:03 +0000 (17:24 +0000)]
busybox: make username consistent
ntpd in packages feed had already a user 'ntp' with UID 123 declared.
Rename the username of busybox-ntpd to be 'ntp' instead of 'ntpd' so
it doesn't clash.
Reported-by: Etienne Champetier <champetier.etienne@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Nick Hainke [Sun, 25 Oct 2020 11:58:30 +0000 (12:58 +0100)]
ath79: define 2.4GHz radio for litebeam ac gen2
The litebeam ac gen2 has a 2.4GHz management radio.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 25 Oct 2020 13:41:31 +0000 (14:41 +0100)]
ath79: define 2.4GHz radio for nanostation ac loco
The nanostation ac loco has a 2.4GHz management radio.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 25 Oct 2020 13:34:40 +0000 (14:34 +0100)]
ath79: fix nanostation ac loco ethernet interface
In 4.14 the delays were not cleared, so setting "rgmii" as phy-mode
did not affect delays set by the bootloader. With 5.4 kernel the
situation changed and the ethernet interface stopped working.
Just taking the ethernetpart from the litebeam ac gen2 will fix
the issue.
Explained-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Nick Hainke <vincent@systemli.org>
projects / openwrt / staging / ansuel.git / log