staging: rtl8188eu: Remove unused function odm_SwAntDivChkAntSwitchCallback()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused funtion odm_DynamicTxPowerNIC()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function odm_RefreshRateAdaptiveMaskAPADSL()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function odm_RefreshRateAdaptiveMaskMP()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8188eu: Remove unused function iodm_1R_CCA()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function odm_DynamicBBPowerSavingInit()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function odm_DynamicBBPowerSaving()

odm_DynamicBBPowerSaving() has empty defination.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function odm_DIGbyRSSI_LPS()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtl8188e_RF_ChangeTxPath()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused structure rf_shadow

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused funtion PHY_ScanOperationBackup8188E()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused funtion phy_TxPwrIdxToDbm()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused funtion PHY_GetTxPowerLevel8188E()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8188eu: Remove unused function phy_DbmToTxPwrIdx()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function PHY_UpdateTxPowerDbm8188E()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtl8192c_PHY_GetHWRegOriginalValue()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function rtl8188e_PHY_ConfigRFWithParaFile()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:rtl8188eu:Remove funtion Hal_CustomizeByCustomerID_8188EU()

Function has empty defination.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused function _ps_close_RF()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function with empty definition _ps_open_RF()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function with empty definition _InitOperationMode()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function with empty definition _InitBeaconMaxError().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove dead code in rtw_drv_init()

(status != _SUCCESS) immediately after 'status = _SUCCESS' will never evaluate
true. Thus remove the logically dead code. Detected by Coverity - CID 1077553.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix usage of uninit scalar in rtw_drv_init()

Function rtw_drv_init() is written in a way that assumes 'status' != _SUCCESS
as long as not explicitly set. Thus initialize 'status' to FAIL, in order to
prevent undefined behaviour if going through the exit paths. Detected by
Coverity - CID 1077832.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix potential leak in rtw_set_key()

Fix a potential leak in the error path of rtw_set_key(). In case the requested
algorithm is not supported by the driver, the function returns without
enqueuing or freeing the already allocated command and parameter structs. Use
a centralized exit path and make sure that all memory is freed correctly.
Detected by Coverity - CID 1077716, 1077717.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix potential leak in update_bcn_wps_ie()

Fix a potential leak in the error path of function update_bcn_wps_ie().
Move the affected input verification to the beginning of the function so
that it may return directly without leaking already allocated memory.
Detected by Coverity - CID 1077718.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix potential leak in rtw_mp_pwrtrk()

Function rtw_mp_pwrtrk() dynamically allocates a temporary buffer that
is not freed in all error paths. Use a centralized exit path and make sure
that all memory is freed correctly. Detected by Coverity - 1077715.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix potential leak in rtw_mp_SetRFPath()

Function rtw_mp_SetRFPath() dynamically allocates a temporary buffer that
is not freed in all error paths. Use a centralized exit path and make sure
that all memory is freed correctly. Detected by Coverity - CID 1077714.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix potential leak in rtw_mp_QueryDrv()

Function rtw_mp_QueryDrv() dynamically allocates a temporary buffer that
is not freed in all error paths. Use a centralized exit path and make sure
that all memory is freed correctly. Detected by Coverity - CID 1077713.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix potential leak in rtw_wx_set_enc_ext()

Function rtw_wx_set_enc_ext() dynamically allocates a temporary buffer that
is not freed in all error paths. Use a centralized exit path and make sure
that all memory is freed correctly. Detected by Coverity - CID 1077712.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix potential leak in rtw_wx_read32()

Function rtw_wx_read32() dynamically allocates a temporary buffer that is not
freed in all error paths. Use a centralized exit path and make sure that all
memory is freed correctly. Detected by Coverity - CID 1077711.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove 'u8 fragcnt' from struct recv_frame

Remove unused variable 'u8 fragcnt'.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove 'int frame_tag' from struct recv_frame

Remove unused variable 'int frame_tag'.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove 'void *precvbuf' from struct recv_frame

Remove unused variable 'void *precvbuf'.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused inline function get_rx_status()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused inline function recvframe_push()

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_os_recvbuf_resource_free()

Use usb_free_urb() instead of rtw_os_recvbuf_resource_free() to free URB.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_hostapd_mlme_rx()

rtw_hostapd_mlme_rx() has empty defination, so we can remove it.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_os_recv_resource_free()

rtw_os_recv_resource_free() has empty defination, so we can remove it.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove function rtw_os_recv_resource_init()

rtw_os_recv_resource_init() has empty defination, so we can remove it.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove struct zero_bulkout_context

Remove unused struct zero_bulkout_context.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove 'spinlock_t lock' from struct recv_priv

Remove unused variable 'spinlock_t lock'.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused member variables of struct recv_priv

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove 'semaphore allrxreturnevt' from struct recv_priv

Remove unused variable 'semaphore allrxreturnevt'.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: Fixed prohibited spaces after open '('

This patch fixes all prohibited spaces  after open '(' checkpatch.pl errors
for rtl8188eu.

Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lirc: Fix sparse warnings

Fix sparse warnings by adding __user and __iomem annotations where
necessary and removing certain unnecessary casts. While at it,
also use u32 in place of __u32.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: r8192U_core.c: Fix to remove null pointer checks that could never happen

Removal of null pointer checks that could never happen

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8192u: Put EXPORT_SYMBOL just after the exported function

Export of symbols statement must be placed right after the definition to meet
kernel coding style guidelines. This issue was reported by checkpatch.

A simplified version of the semantic patch that makes this change is as
follows (http://coccinelle.lip6.fr/):

// <smpl>

@ r @ identifier f; @@
- EXPORT_SYMBOL(f);

@@ identifier r.f; @@
  f(...) { ... }
+ EXPORT_SYMBOL(f);

// </smpl>

Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: Remove useless return variables

This patch remove variables that are initialized with a constant,
are never updated, and are only used as parameter of return.
Return the constant instead of using a variable.

Verified by compilation only.

The coccinelle script that find and fixes this issue is:
// <smpl>
@@
type T;
constant C;
identifier ret;
@@
- T ret = C;
... when != ret
- return ret;
+ return C;
// </smpl>

Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: dead code remove diversity code

bDiversityRegCtlON is always false.

In later vendor driver code has been commented out.

Remove diversity timers and variables.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: remove dead code tcrc.c/h

Functions are now dead and of no use.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: s_vSWencryption replace CRCdwGetCrc32Ex

Replace with ether_crc_le which gives the same result.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: ETHbIsBufferCrc32Ok replace CRCdwGetCrc32

CRCdwGetCrc32 is a bitwise not of ether_crc_le.

Replace with ether_crc_le.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: iowpa.h removed dead code.

Remove dead strutures

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: iocmd.h remove dead code.

Remove dead strutures and macros.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8821ae: avoid format string leak to thread name

This makes sure the cfg->name can never accidentally be processed as a
format string in the worker thread name.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: fix not declared symbols should be static in sw.c

This commit fixes the following sparse warnings:

drivers/staging/rtl8821ae/rtl8821ae/sw.c:
    - 48:6: warning: symbol 'rtl8821ae_init_aspm_vars' was not declared.
      Should it be static?
    - 228:5: warning: symbol 'rtl8812ae_rx_command_packet_handler' was
      not declared. Should it be static?
    - 263:20: warning: symbol 'rtl8821ae_hal_ops' was not declared.
      Should it be static?
    - 314:23: warning: symbol 'rtl8821ae_mod_params' was not declared.
      Should it be static?
    - 321:20: warning: symbol 'rtl8821ae_hal_cfg' was not declared.
      Should it be static?

All of this symbols are local, that is there are no references to them
in the other files from this driver.

Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: fix double const in sw.c

This commit fixes the following sparse warning:

drivers/staging/rtl8821ae/rtl8821ae/sw.c:
    - 449:14: warning: duplicate const

Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: fix pointer coding style

Found by checkpatch.

Signed-off-by: Levente Kurusa <levex@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: keucr: smilmain.c: cosmetic updates

* Move Check_D_MediaFmt() implementation up in smilmain.c to keep all the
  non-static functions at the top of the file;
* Remove unnecessary extern and newlines from "init.h";

Signed-off-by: Tair Rzayev <tair.rzayev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: move apci1564_do_insn_bits() to addi_apci_1564.c

This function is already compliant with the comedi API and is behaving as
comedi core expects.  This patch moves it out of
addi-data/hwdrv_apci1564.c and into the driver proper since no further
work needs to be done on it.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: move apci1564_di_insn_bits() to addi_apci_1564.c

This function is already compliant with the comedi API and is behaving as
comedi core expects.  This patch moves it out of
addi-data/hwdrv_apci1564.c and into the driver proper since no further
work needs to be done on it.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: fixed warning shown by checkpatch tool on cb_das16_cs.c file

This is a patch to fix the warnings shown by checkpatch tool on
file cb_das16_cs.c

Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: fixed warnings reported by checkpatch tool on comedi_test.c file

This is a patch to remove warnings reported by checkpatch tool on
comedi_test.c file

Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: Fixes Coding Style Warning in file das08.h

The Patch fixes following Warnings, found using checkpatch.pl, in file das08.h

./scripts/checkpatch.pl --file --terse drivers/staging/comedi/drivers/das08.h
drivers/staging/comedi/drivers/das08.h:43: WARNING: line over 80 characters
total: 0 errors, 1 warnings, 50 lines checked

Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ii_pci20kc: fix usage of uninit scalar in ii20k_attach()

This driver supports the PCI-20001C-1a and PCI-20001C-2a carrier boards.
The -2a version has 32 on-board DIO channels. In case this variant is
detected, local variable 'has_dio' is set accordingly. Otherwise it is
left uninitialized and the following subdevice instantiation depends on
the stack. Detected by Coverity - CID 1077830.

Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: remove boardinfo

This driver only supports a single board type.  Remove the boardinfo and
its use in the driver.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: remove check for timer subdevice

The only board served by this driver always has a timer, so we can init
the timer subdevice without checking first.

The boardinfo about the timer can also be removed and the data used
directly.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: remove subdevice member of struct comedi_async

The `async` member of `struct comedi_subdevice` may point to a `struct
comedi_async` or may be NULL.  The `subdevice` member of `struct
comedi_async` points back to the `struct comedi_subdevice` associated
with it in a one-to-one relationship.

All uses of the `subdevice` member of `struct comedi_async` apart from
its initialization have now been removed (by passing around a pointer to
the subdevice instead of to the "async" structure), so get rid of it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: pass subdevice to mite_sync_output_dma()

`mite_sync_output_dma()` in the "mite" module currently takes a pointer
to a `struct comedi_async` and gets a pointer to the owning `struct
comedi_subdevice` from the `subdevice` member.  Change it to take a
pointer to a `struct comedi_subdevice` and use the `async` member.

The motivation for this is to eliminate the `subdevice` member of
`struct comedi_async`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: pass subdevice to mite_sync_input_dma()

`mite_sync_input_dma()` in the "mite" module currently takes a pointer
to a `struct comedi_async` and gets a pointer to the owning `struct
comedi_subdevice` from the `subdevice` member.  Change it to take a
pointer to a `struct comedi_subdevice` and use the `async` member.

The motivation for this is to eliminate the `subdevice` member of
`struct comedi_async`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: pass subdevice to mite_buf_change()

`mite_buf_change()` in the "mite" module currently takes a pointer to a
`struct comedi_async` and gets a pointer to the owning `struct
comedi_subdevice` from the `subdevice` member.  Change it to take a
pointer to a `struct comedi_subdevice` and use the `async` member.

The motivation for this is to eliminate the `subdevice` member of
`struct comedi_async`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to comedi_buf_write_n_available()

Local function `comedi_buf_write_n_available()` currently takes a
pointer to a `struct comedi_async`.  Change it to take a pointer to a
`struct comedi_subdevice` and use the `async` member for consistency
with the other comedi buffer handling functions.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to __comedi_buf_write_alloc()

Local function `__comedi_buf_write_alloc()` is called by
`comedi_buf_write_alloc()` and `comedi_buf_put()`.  It currently takes a
pointer to a `struct comedi_async`.  Change it to take a pointer to a
`struct comedi_subdevice` and use the `async` member for consistency
with other comedi buffer handling functions.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to comedi_buf_munge()

Local function `comedi_buf_munge()` is called by
`comedi_buf_write_free()` to modify (or "munge") the data copied from
a device into the buffer.

Currently, the function takes a pointer to a `struct comedi_async` and
gets a pointer to the comedi subdevice from the `subdevice` member.
Change it to take a pointer to a `struct comedi_subdevice` and get a
pointer to the "async" structure from the `async` member.

The main motivation for this is to elimate the `subdevice` member of
`struct comedi_async`.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to comedi_buf_is_mmapped()

Change the parameters of `comedi_buf_is_mmapped()` to pass a pointer to
the comedi subdevice instead of a pointer to the "async" structure
belonging to the subdevice.

The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to comedi_buf_reset()

Change the parameters of `comedi_buf_reset()` to pass a pointer to the
comedi subdevice instead of a pointer to the "async" structure belonging
to the subdevice.

The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to comedi_buf_read_n_available()

Change the parameters of `comedi_buf_read_n_available()` to pass a
pointer to the comedi subdevice instead of a pointer to the "async"
structure belonging to the subdevice.

The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to comedi_buf_read_free()

Change the parameters of `comedi_buf_read_free()` to pass a pointer to
the comedi subdevice instead of a pointer to the "async" structure
belonging to the subdevice.

The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to comedi_buf_read_alloc()

Change the parameters of `comedi_buf_read_alloc()` to pass a pointer to
the comedi subdevice instead of a pointer to the "async" structure
belonging to the subdevice.

The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to comedi_buf_write_n_allocated()

Change the parameters of `comedi_buf_write_n_allocated()` to pass a
pointer to the comedi subdevice instead of a pointer to the "async"
structure belonging to the subdevice.

The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to comedi_buf_write_free()

Change the parameters of `comedi_buf_write_free()` to pass a pointer to
the comedi subdevice instead of a pointer to the "async" structure
belonging to the subdevice.

The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to comedi_buf_write_alloc()

Change the parameters of `comedi_buf_write_alloc()` to pass a pointer to
the comedi subdevice instead of a pointer to the "async" structure
belonging to the subdevice.

The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tiocmd: pass subdevice to command setup functions

The `ni_tio_input_cmd()`, `ni_tio_output_cmd()` and `ni_tio_cmd_setup()`
functions are called from `ni_tio_cmd()` to set up a comedi command.
They currently get passed two parameters, a pointer to a `struct
ni_gpct` and a pointer to a `struct comedi_async`, but both of those
come from members of a `struct comedi_subdevice` (the former from the
`private` member).  Replace the parameters with a pointer to the `struct
comedi_subdevice`.

The main motive is to make the comedi subdevice more easily available to
the functions for the use of subsequent patches to remove the `struct
comedi_async *` parameters from the comedi buffer handling functions.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to comedi_buf_memcpy_from()

Change the parameters of `comedi_buf_memcpy_from()` to pass a pointer to
the comedi subdevice instead of a pointer to the "async" structure
belonging to the subdevice.

The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to comedi_buf_memcpy_to()

Change the parameters of `comedi_buf_memcpy_to()` to pass a pointer to
the comedi subdevice instead of a pointer to the "async" structure
belonging to the subdevice.

The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to comedi_buf_get()

Change the parameters of `comedi_buf_get()` to pass a pointer to the
comedi subdevice instead of a pointer to the "async" structure belonging
to the subdevice.

The function gets a sample value from the comedi buffer, but currently
only deals with 16-bit sample types.  A future version could deal with
16 or 32-bit sample types depending on the value of the SDF_LSAMPL
subdevice flag.

The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pass subdevice to comedi_buf_put()

Change the parameters of `comedi_buf_put()` to pass a pointer to the
comedi subdevice instead of a pointer to the "async" structure belonging
to the subdevice.

The function puts a sample value in the comedi buffer, but currently
only deals with 16-bit sample types.  A future version could deal with
16 or 32-bit sample types depending on the value of the SDF_LSAMPL
subdevice flag.

The main aim at the moment is to replace all the `struct comedi_async *`
parameters with `struct comedi_subdevice *` parameters in the comedi
driver API.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl730: add support for Diamond Systems PC/104 modules

The Diamond Systems OPMM-1616-XT board is a PC/104 module with 16
optoisolated inputs and 16 relay outputs.

The PEARL-MM-P board is a PC/104 module with 16 relay outputs.

Both of these boards can be supported by the pcl730 driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci224: use comedi_fc helpers to validate timer args

Use the comedi_fc helper cfc_check_trigger_arg_is() to validate the
scan_begin_arg when the scan_begin_src is TRIG_TIMER.

For aesthetics reasons, rename the local variable 'tmp' to 'arg'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_dio200_common: remove 'continuous' from subdevice private data

This member of the subdevice private data can be determined from the
cmd->stop_src. Do that instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pc19111: remove 'chanlist_len' from private data

This member of the private data is a copy of the cmd->chanlist_len. Use
that instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pc19111: rename 'async_cmd' variable in (*do_cmd)

The comedi_cmd pointer is typically just called 'cmd'. Rename the local
variable in pci9111_ai_do_cmd().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pc19111: remove 'stop_is_none' from private data

This member of the private data can be determined by checking the
cmd->stop_src. Do that instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'dmabuf_samples' from private data

This member of the private data is set but never used. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'cnt0_divisor' from private data

This member of the private data is not used. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up start_pacer()

For aesthetics, rename this function so it has namespace associated
with the driver.

The divisors used to load the counters are stored in the private data.
Get them from there and remove the parameters.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: tidy up interrupt_pci9118()

For aesthetics, rename this function so it has namespace associated
with the driver.

Refactor the function to reduce the indent level and tidy up the code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'int_ai_func' from private data

The devpriv->usedma flag can be checked to determine which handler
function should be used to transfer the analog input data. Do that
instead and remove the member from the private data.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9118: remove 'ai16bits' from private data

This member of the private data is only set when the analog input
subdevice maxdata is 0xffff. Just check the s->maxdata and remove
the private data member.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>