Felix Fietkau [Thu, 17 Sep 2015 10:16:38 +0000 (10:16 +0000)]
x86: fix Geode LX timekeeping (#20531)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46985
SVN-Revision: 46987
Steven Barth [Tue, 15 Sep 2015 14:56:43 +0000 (14:56 +0000)]
ppp: backport use a more reliable way to set script environment
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46943
Felix Fietkau [Mon, 14 Sep 2015 16:50:47 +0000 (16:50 +0000)]
base-files: replace the opkg key with the one used for the final image
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46910
Felix Fietkau [Mon, 14 Sep 2015 06:57:07 +0000 (06:57 +0000)]
ramips: fix chunked-io support for big flash chips (#20504)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46904
SVN-Revision: 46905
Rafał Miłecki [Mon, 14 Sep 2015 06:14:41 +0000 (06:14 +0000)]
bcm53xx: add NAND flash chip description for Asus RT-AC87U
This isn't that important due to different NAND driver but keeps DTS and
backports consistent.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Inspired by r46892 (trunk).
SVN-Revision: 46902
Felix Fietkau [Sun, 13 Sep 2015 20:46:00 +0000 (20:46 +0000)]
ath10k: reduce dma burst size on newer firmware to fix crashes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46900
SVN-Revision: 46901
Rafał Miłecki [Fri, 11 Sep 2015 12:09:00 +0000 (12:09 +0000)]
kernel: drop some left XHCI patch for 4.0
It was accidentally added in r46094.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46849
Jonas Gorski [Fri, 11 Sep 2015 10:48:42 +0000 (10:48 +0000)]
CC: opkg: ensure image provided feeds are available after sysupgrade
Split the opkg.conf into three files, to make it easier to support custom
feeds and configs:
* /etc/opkg.conf -> base opkg configuration
* /etc/opkg/distfeeds.conf -> default Openwrt package feeds
* /etc/opkg/customfeeds.conf -> custom package feeds
Of these three, only the base opkg.conf and the customfeeds.conf is marked
as to be kept, so that the distfeeds.conf from the image is always used.
To ease migration, a script is added that moves any feeds from /etc/opkg.conf
to /etc/opkg/customfeeds.conf on first boot.
Also ensure that any keys used for verification are also kept in upgrade.
Backport of r46491.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46848
Jonas Gorski [Fri, 11 Sep 2015 10:48:34 +0000 (10:48 +0000)]
CC: kernel: update 3.18 to 3.18.21
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46847
Felix Fietkau [Fri, 11 Sep 2015 08:49:42 +0000 (08:49 +0000)]
ipq806x: delete from CC branch; it is broken and unsupported
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46845
Felix Fietkau [Tue, 8 Sep 2015 14:31:41 +0000 (14:31 +0000)]
kernel: restore 640-bridge_no_eap_forward.patch to its original form
It was corrupted in r38528. The most obvious symptom is repeated messages like this:
Tue Sep 8 08:25:18 2015 kern.warn kernel: [77141.972226] br-lan: received packet on wlan0 with own address as source address
Signed-off-by: Dmitry Ivanov <dima@ubnt.com>
Backport of r46821
SVN-Revision: 46822
Rafał Miłecki [Tue, 8 Sep 2015 06:01:04 +0000 (06:01 +0000)]
brcm47xx: apply serial flash size trick to Netgear WNR1000 V3
It also uses different block size just like WGR614 V10.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46810
SVN-Revision: 46812
Rafał Miłecki [Tue, 8 Sep 2015 06:00:59 +0000 (06:00 +0000)]
brcm47xx: add Netgear WNR1000 V3 support in the Linux arch code
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46805
SVN-Revision: 46811
Felix Fietkau [Mon, 7 Sep 2015 19:19:25 +0000 (19:19 +0000)]
uhttpd: update to the latest version, fixes deferred cgi script processing (#20458)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46807
SVN-Revision: 46808
Felix Fietkau [Wed, 2 Sep 2015 09:26:22 +0000 (09:26 +0000)]
ramips: fix devicetree corruption with some boot loaders if the caches are not ready at boot
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46766
SVN-Revision: 46767
Hauke Mehrtens [Sat, 29 Aug 2015 20:32:26 +0000 (20:32 +0000)]
CC: hostapd: properly enable 802.11w support
backport of r46737
Add CONFIG_IEEE80211W variable to DRIVER_MAKEOPTS so that 802.11w
support is properly compiled in full variant.
This fixes #20179
Signed-off-by: Janusz Dziemidowicz <rraptorr@nails.eu.org>
SVN-Revision: 46751
Hauke Mehrtens [Sat, 29 Aug 2015 20:05:41 +0000 (20:05 +0000)]
CC: broadcom-wl: add interface after bridge is up
backport of r46749
Without this patch adding the wifi device to the bridge may fail
because the bridge is not already configured when the wifi device gets
configured. This patch makes broadcom-wl wait till the bridge is ready.
This fixes #17262
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46750
Hauke Mehrtens [Sat, 29 Aug 2015 17:40:11 +0000 (17:40 +0000)]
CC: broadcom-wl: fix bash comparison error
Backport of r46746
This fixes #17495
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46748
Hauke Mehrtens [Sat, 29 Aug 2015 17:39:36 +0000 (17:39 +0000)]
CC: broadcom-wl: fix section mismatches in broadcom-wl driver
Backport of r46745
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46747
Rafał Miłecki [Sat, 29 Aug 2015 09:28:31 +0000 (09:28 +0000)]
brcm47xx: fix Linksys E1200 V2 image filename
Drop unwanted suffix (copy & paste mistake).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46742
SVN-Revision: 46743
Rafał Miłecki [Thu, 27 Aug 2015 14:58:00 +0000 (14:58 +0000)]
mac80211: add pending brcmfmac patch fixing warm reboots
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46739
SVN-Revision: 46740
Rafał Miłecki [Wed, 26 Aug 2015 22:57:54 +0000 (22:57 +0000)]
mac80211: update brcmfmac to the latest version
This also adds one patchset of pending changes that fix support for
multiple interfaces. It was somehow broken.
Driver couldn't correctly match firmware and system interfaces resulting
in not working APs and WARNINGs.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46736
Rafał Miłecki [Wed, 26 Aug 2015 22:57:29 +0000 (22:57 +0000)]
mac80211: group last brcmfmac changes into (half) patchset
This prepares some place for backporting extra patches.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46735
Rafał Miłecki [Wed, 26 Aug 2015 16:20:39 +0000 (16:20 +0000)]
bcm53xx: add support for Netgear R7000
Backport of r46363 r46730 r46731 r46732.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46733
Jonas Gorski [Wed, 26 Aug 2015 13:04:13 +0000 (13:04 +0000)]
CC: brcm63xx: fix WAP-5813n default network config
/etc/uci-defaults/02_network had a typo, making it generate the wrong
network config.
Closes #20407.
Backport of r46727.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46728
Jonas Gorski [Sun, 23 Aug 2015 13:37:42 +0000 (13:37 +0000)]
CC: mvebu: kirkwood: fix ehci-orion probe if generic-phy isn't enabled
Properly treat -ENOSYS as no PHY, else ehci-orion won't work without
generic phy support.
Backport of r46711.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46712
Jonas Gorski [Sun, 23 Aug 2015 09:41:27 +0000 (09:41 +0000)]
CC: mac80211: disable ipw2x00 for big endian targets
The ipw2x00 drivers assume that the system they are running is little
endian, and access everything in native byte order. When run on a big
endian system, everything breaks apart.
Since fixing this is non trivial on a first glance, disable them for
big endian targets.
Backport of r46708.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46710
Jonas Gorski [Sun, 23 Aug 2015 09:41:07 +0000 (09:41 +0000)]
CC: brcm63xx: ensure dummy byte is set for mapped spi flash with fast read
Some CFEs seem to misconfigure the mapped memory flash access with
fast read but without a dummy byte, causing all accesses to be prefixed
with 0xff.
This of course breaks reading out the nvram, so do not just move back to
single i/o accessors, but also ensure that the dummy byte is correctly
set.
Backport of r46707.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46709
Imre Kaloz [Fri, 21 Aug 2015 08:06:07 +0000 (08:06 +0000)]
mvebu: fix cobra chainmask (backport of r46697)
Thanks Sebastian for spotting it.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46698
Imre Kaloz [Thu, 20 Aug 2015 20:45:16 +0000 (20:45 +0000)]
mwlwifi: downgrade to 10.3.0.3-
20150804
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46695
Imre Kaloz [Wed, 19 Aug 2015 08:44:26 +0000 (08:44 +0000)]
mwlwifi: fix commit hash for 10.3.0.8
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46692
Imre Kaloz [Wed, 19 Aug 2015 08:35:41 +0000 (08:35 +0000)]
mvebu: add support for the Linksys boot counter (backport of r46690)
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46691
Imre Kaloz [Wed, 19 Aug 2015 08:21:20 +0000 (08:21 +0000)]
uhttpd: we don't know where the device is located, so reflect that in the cert
backport of r46688
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46689
Imre Kaloz [Tue, 18 Aug 2015 11:20:59 +0000 (11:20 +0000)]
mwlwifi: upgrade to 10.3.0.8-
20150818
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46686
Hauke Mehrtens [Mon, 17 Aug 2015 19:23:34 +0000 (19:23 +0000)]
xz: update to version 5.2.1
Backport of 46603.
This adds support for symbol versioning which is needed on
CentOs/RedHat 7 to fix #20134.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46681
Hauke Mehrtens [Mon, 17 Aug 2015 19:01:16 +0000 (19:01 +0000)]
CC: kernel: update 3.18 to 3.18.20
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46680
Hauke Mehrtens [Mon, 17 Aug 2015 18:59:00 +0000 (18:59 +0000)]
procd: fix seccomp build on some architectures
Backport of r46612.
fix generating syscall-names.h
Sometimes the syscall number is not defined with a number but with an
offset to an other syscall and then make_syscall_h.sh created some
broken header file.
For example the bit/syscall.h from musl for i386 has this:
#define __NR_timer_create 259
#define __NR_timer_settime (__NR_timer_create+1)
With this patch the resulting array looks like this:
[259] = "timer_create",
[(__NR_timer_create+1)] = "timer_settime",
This closes #20195.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46679
Jo-Philipp Wich [Mon, 17 Aug 2015 16:41:53 +0000 (16:41 +0000)]
CC: uhttpd: pass X-HTTP-Method-Override header to cgi scripts
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46677
SVN-Revision: 46678
John Crispin [Mon, 17 Aug 2015 13:19:01 +0000 (13:19 +0000)]
ugps: update to latest git HEAD
fixes 2 bugs
* typo
* use %04d rather than %d when printing the position
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46666
SVN-Revision: 46675
John Crispin [Mon, 17 Aug 2015 13:18:56 +0000 (13:18 +0000)]
ar71xx: Add support for Black Swift
Add support for the Black Swift board:
http://www.black-swift.com/
Took relevant parts and slightly adapted from:
https://github.com/blackswift/openwrt/blob/master/bsb.patch
Signed-off-by: Bruno Randolf <br1@einfach.org>
SVN-Revision: 46674
John Crispin [Mon, 17 Aug 2015 13:18:50 +0000 (13:18 +0000)]
ar71xx: Enable ath10k calibration data loading for EnGenius ESR1750 and EPG500.
Kinda-backport of r46415, though this patch uses the old-style calibration data loading.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46673
Felix Fietkau [Thu, 13 Aug 2015 19:35:29 +0000 (19:35 +0000)]
image: fix handling of per-device kernel build commands
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46589
SVN-Revision: 46591
Felix Fietkau [Thu, 13 Aug 2015 19:35:26 +0000 (19:35 +0000)]
image: fix device variable exports for initramfs images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46496
SVN-Revision: 46590
Rafał Miłecki [Wed, 12 Aug 2015 15:26:18 +0000 (15:26 +0000)]
bcm53xx: add workaround for Netgear R8000 network
According to the info from NVRAM we should use port 8 for the CPU (and
interface eth2). Unfortunately it doesn't work right now, so lets switch
to the port 5.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46586
Rafał Miłecki [Wed, 12 Aug 2015 13:30:34 +0000 (13:30 +0000)]
brcm47xx: fix reading WGT634U CFE variables
We got check for nvram_len placed too early and the code never tried
reading CFE variables used on WGT634U. This is a regression introduced
in r45942 and reported in #20291.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46584
SVN-Revision: 46585
Rafał Miłecki [Wed, 12 Aug 2015 00:58:41 +0000 (00:58 +0000)]
base-files: buttons: make power script return 0
It was missed in the r46471.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46582
SVN-Revision: 46583
Rafał Miłecki [Mon, 10 Aug 2015 23:58:15 +0000 (23:58 +0000)]
buttons: make all button handler scripts return 0
this is required by the new button timeout feature
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46471
SVN-Revision: 46581
Rafał Miłecki [Mon, 10 Aug 2015 22:29:46 +0000 (22:29 +0000)]
procd: update to the latest version, add "button" hotplug handler
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
In 15.05-rc2 we got support for "set-interval" and "clear-interval"
which got dropped with the update of procd done in r46257. This new
"button" action provides similar functionality so it makes sense to
backport it to 15.05.
Backport of r46578
SVN-Revision: 46579
Hauke Mehrtens [Sun, 9 Aug 2015 17:19:00 +0000 (17:19 +0000)]
CC: kernel: crypto: fix module loading of aead.ko
The name of the module was wrong before.
This should fix #20283.
backport of r46574.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46577
John Crispin [Mon, 3 Aug 2015 10:22:38 +0000 (10:22 +0000)]
ar71xx: use automatic firmware partition splitting for devolo dLAN devices
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
Backport of r46414
SVN-Revision: 46549
John Crispin [Mon, 3 Aug 2015 10:22:33 +0000 (10:22 +0000)]
ar71xx: Backport support for Onion Omega
Backport of r46458 to CC
https://onion.io/omega
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: Boken Lin <bl@onion.io>
Tested-by: Jacky Huang <huangfangcheng@163.com>
SVN-Revision: 46548
Felix Fietkau [Sun, 2 Aug 2015 15:08:27 +0000 (15:08 +0000)]
ramips: Fix Ticket #20153 swap radio calibration data pointers on the RE6500
This patch fixes weak radio signal reported by nikola.georgiev
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Backport of r46545
SVN-Revision: 46546
Felix Fietkau [Sat, 1 Aug 2015 15:52:54 +0000 (15:52 +0000)]
ar71xx: fix mr3220 device profile (#19990)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46541
SVN-Revision: 46542
Zoltan Herpai [Fri, 31 Jul 2015 19:57:10 +0000 (19:57 +0000)]
sunxi: CC: fix networking on Olimex A20 Micro
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46537
Imre Kaloz [Fri, 31 Jul 2015 18:25:03 +0000 (18:25 +0000)]
mvebu: update dts files for mamba / WRT1900AC (backport of r46530)
Fix for default button states in WRT1900AC dts files.
This prevents overlay wipe when reset is pressed.
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
SVN-Revision: 46531
Imre Kaloz [Fri, 31 Jul 2015 18:08:51 +0000 (18:08 +0000)]
mvebu: fix gpio config on the WRT1200AC (backport of r46527)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46528
Imre Kaloz [Thu, 30 Jul 2015 06:41:43 +0000 (06:41 +0000)]
mwlwifi: upgrade to latest rev with fixed firmware (backport of r46520)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46521
Jo-Philipp Wich [Mon, 27 Jul 2015 23:49:48 +0000 (23:49 +0000)]
CC: sdk: provide explicit CONFIG_MODULES kconfig symbol
Extend the SDK Config.in file to explicitely declare a MODULES symbol with
the "option modules" flag set in order to prevent a kconfig segmentation fault
whenever a "depends m" dependency is encountered.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46514
SVN-Revision: 46515
Jo-Philipp Wich [Mon, 27 Jul 2015 11:49:48 +0000 (11:49 +0000)]
CC: dnsmasq: add some missing files to the jail
found with strace, not sure we got all of them though
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Backport of r46467
SVN-Revision: 46511
Jo-Philipp Wich [Mon, 27 Jul 2015 11:49:43 +0000 (11:49 +0000)]
CC: base-files: fix /tmp/.jail permissions
We need a+x rights on the path to the root of the jails
so we can use users other than root (like nobody)
This partly fixes jailed dnsmasq
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Backport of r46466
SVN-Revision: 46510
Jo-Philipp Wich [Mon, 27 Jul 2015 11:49:39 +0000 (11:49 +0000)]
CC: procd: update to latest git HEAD
fixes http://patchwork.ozlabs.org/patch/497899/
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46465
SVN-Revision: 46509
Steven Barth [Mon, 27 Jul 2015 11:48:00 +0000 (11:48 +0000)]
firewall: fix typo in ESP rule
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46508
Steven Barth [Mon, 27 Jul 2015 11:47:56 +0000 (11:47 +0000)]
firewall: comply with REC-22, REC-24 of RFC 6092
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46507
Felix Fietkau [Sun, 26 Jul 2015 13:02:37 +0000 (13:02 +0000)]
ramips: swap radio calibration data pointers for DIR-860L
Fixes low 5 GHz tx power issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46497
SVN-Revision: 46499
Felix Fietkau [Sun, 26 Jul 2015 13:02:35 +0000 (13:02 +0000)]
tools: drop circular dependency between patch and ccache, build patch without ccache (fixes #20132)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46434
SVN-Revision: 46498
Hauke Mehrtens [Sat, 25 Jul 2015 13:54:15 +0000 (13:54 +0000)]
CC: ar71xx: EPG5000 requires ATH79_NVRAM
EPG5000 uses ath79 nvram functions, but does not select it. This breaks
build if no other board support enabling nvram support is selected.
Closes #19952.
Backport of r46190.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46494
Jonas Gorski [Sat, 25 Jul 2015 10:02:47 +0000 (10:02 +0000)]
CC: kernel: update 3.18 to 3.18.19
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.19
Backport of r46439.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46487
Jonas Gorski [Sat, 25 Jul 2015 10:02:44 +0000 (10:02 +0000)]
CC: brcm63xx: HG553 buttons support
This patch adds buttons support for Huawei EchoLife HG553.
Backport of r46388.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46486
John Crispin [Fri, 24 Jul 2015 08:58:57 +0000 (08:58 +0000)]
CC: ar71xx: add LED defaults for the EnGenius EPG5000
NB that wlan5g is phy0tpt and wlan2g phy1tpt.
Backport of r46226.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46450
John Crispin [Fri, 24 Jul 2015 08:58:45 +0000 (08:58 +0000)]
CC: ar71xx: Fix WAN port location on EnGenius ESR1750 and EPG5000.
The designated blue WAN port on both devices has index 5, not 1.
Backport of r46227.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46449
John Crispin [Fri, 24 Jul 2015 08:58:40 +0000 (08:58 +0000)]
CC: ar71xx: add profile and build image for EnGenius EPG5000.
Backport of r46049.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46448
John Crispin [Fri, 24 Jul 2015 08:58:33 +0000 (08:58 +0000)]
CC: ar71xx: add user-space support for EnGenius EPG5000.
Backport of r46048.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46447
John Crispin [Fri, 24 Jul 2015 08:58:27 +0000 (08:58 +0000)]
CC: ar71xx: add kernel support for EnGenius EPG5000.
Backport of r46047.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46446
John Crispin [Fri, 24 Jul 2015 08:58:20 +0000 (08:58 +0000)]
v3: CC : ar71xx: Backport Support for the Bitmain Antminer S3
Backport of r46236 to CC : add support for the Bitmain Antminer S3
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 46445
John Crispin [Fri, 24 Jul 2015 08:58:12 +0000 (08:58 +0000)]
ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac
Backport of r46342
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46444
John Crispin [Fri, 24 Jul 2015 08:58:07 +0000 (08:58 +0000)]
mac80211: make ath10k firmware v2 selectable
Added option for old firmware version (10.1 API v2). It seems that recent
firmware versions are constantly crashing (at least on a QCA9880-BR4A-R) and
this provides the option to select an older version instead.
Backport of r46340
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46443
John Crispin [Fri, 24 Jul 2015 08:58:03 +0000 (08:58 +0000)]
ar71xx: add support for the devolo dLAN pro 500 Wireless+
Backport of r46338
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46442
Florian Fainelli [Sat, 18 Jul 2015 22:36:18 +0000 (22:36 +0000)]
at91: add Device Tree based board detection
Set up eth0 as LAN interface by default.
Backport of r46174
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 46419
Florian Fainelli [Sat, 18 Jul 2015 22:35:36 +0000 (22:35 +0000)]
at91: sama5d3: enable USB2 by default
Backport of r46173
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 46418
Florian Fainelli [Sat, 18 Jul 2015 22:34:58 +0000 (22:34 +0000)]
kernel: fix OHCI and EHCI modules for AT91
We were not copying the additional files needed to get USB to work on
the AT91 platforms, make sure we do this.
Backport of r46172
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 46417
Florian Fainelli [Sat, 18 Jul 2015 22:33:08 +0000 (22:33 +0000)]
at91: enable Micrel PHY driver
The AT91 SAMA5D3XPLAINED uses a KSZ9031 and a KSZ8081 that are supported
by this PHY driver.
Backport of r46171
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 46416
Felix Fietkau [Sat, 18 Jul 2015 16:56:28 +0000 (16:56 +0000)]
mt76: backport rx buffer allocation fix from r46409
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46412
Felix Fietkau [Sat, 18 Jul 2015 16:56:25 +0000 (16:56 +0000)]
ramips: enable mt76 by default for mt7621
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46410
SVN-Revision: 46411
Jo-Philipp Wich [Fri, 17 Jul 2015 11:37:47 +0000 (11:37 +0000)]
CC: toplevel.mk: fix LD_LIBRARY_PATH for host binaries
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46394
SVN-Revision: 46395
Rafał Miłecki [Tue, 14 Jul 2015 10:32:51 +0000 (10:32 +0000)]
ubox: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
This adds support for filtering messages
Backport of r46356
SVN-Revision: 46365
Steven Barth [Mon, 13 Jul 2015 21:52:25 +0000 (21:52 +0000)]
odhcp6c: fix some more compatibility issues
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46337
Steven Barth [Mon, 13 Jul 2015 21:52:14 +0000 (21:52 +0000)]
odhcp6c: work-around more ISP DHCPv6-PD issues
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46336
Hauke Mehrtens [Sun, 12 Jul 2015 16:03:51 +0000 (16:03 +0000)]
CC: curl: fix some security vulnerabilities
This fixes the following security vulnerabilities in curl:
* CVE-2015-3143
* CVE-2015-3144
* CVE-2015-3145
* CVE-2015-3148
* CVE-2015-3153
* CVE-2015-3236
* CVE-2015-3237
This was fixed in trunk with update to version 7.43.0 in r46169.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46312
Hauke Mehrtens [Sun, 12 Jul 2015 16:03:09 +0000 (16:03 +0000)]
CC: kernel: fix loading bluetooth_6lowpan
Backprot of r46179
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46311
Hauke Mehrtens [Sun, 12 Jul 2015 16:02:47 +0000 (16:02 +0000)]
CC: kernel: add missing config option
This should fix build of sunxi.
Backport of r46304
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46310
Hauke Mehrtens [Sun, 12 Jul 2015 16:02:34 +0000 (16:02 +0000)]
CC: kernel: update 3.18 to 3.18.18
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.18
Backport of r46299, r46303 and r46308.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46309
Felix Fietkau [Fri, 10 Jul 2015 11:37:36 +0000 (11:37 +0000)]
ebtables: remove partially broken musl fix
See http://patchwork.ozlabs.org/patch/493573/ for more information
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46293
Felix Fietkau [Fri, 10 Jul 2015 11:28:44 +0000 (11:28 +0000)]
toolchain: mark musl as broken for the chaos_calmer branch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46291
Rafał Miłecki [Thu, 9 Jul 2015 18:23:41 +0000 (18:23 +0000)]
mac80211: add brcmfmac patch fixing user space picked MACs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46288
SVN-Revision: 46290
Rafał Miłecki [Thu, 9 Jul 2015 18:23:35 +0000 (18:23 +0000)]
mac80211: try to workaround some brcmfmac bug with handling interfaces
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46278
SVN-Revision: 46289
Jo-Philipp Wich [Thu, 9 Jul 2015 13:15:19 +0000 (13:15 +0000)]
CC: openssl: update to v1.0.2d (CVE-2015-1793)
During certificate verification, OpenSSL (starting from version 1.0.1n and
1.0.2b) will attempt to find an alternative certificate chain if the first
attempt to build such a chain fails. An error in the implementation of this
logic can mean that an attacker could cause certain checks on untrusted
certificates to be bypassed, such as the CA flag, enabling them to use a valid
leaf certificate to act as a CA and "issue" an invalid certificate.
This issue will impact any application that verifies certificates including
SSL/TLS/DTLS clients and SSL/TLS/DTLS servers using client authentication.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46285
SVN-Revision: 46286
John Crispin [Thu, 9 Jul 2015 05:29:25 +0000 (05:29 +0000)]
x86/xen_domu: enable image generation
Add features ext4 targz to target x86/xen_domu in order to
generate images in defconfig.
This fixes #18074.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Backport of r46233
SVN-Revision: 46277
Rafał Miłecki [Wed, 8 Jul 2015 06:06:07 +0000 (06:06 +0000)]
nvram: get rid of NVRAM_SPACE
Now we support NVRAM whatever its size is.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46262
SVN-Revision: 46263
Rafał Miłecki [Wed, 8 Jul 2015 05:45:09 +0000 (05:45 +0000)]
nvram: fix displayed info about NVRAM size
Use actual partition size and content offset to calculate it.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46260
SVN-Revision: 46261
Rafał Miłecki [Wed, 8 Jul 2015 04:55:10 +0000 (04:55 +0000)]
Revert "Revert "nvram: increase NVRAM size to 64 KiB""
This reverts commit r45579.
With the latest change r46251 ("nvram: fix "Segmentation fault" caused
by setting memory out of buffer") nvram utility shouldn't crash anymore.
It was tested on 3 brcm47xx devices:
1) Unknown with 0x10000 NVRAM size (0x8000 offset)
2) Linksys E1000 V2.1 with 0x10000 (0x8000 offset)
3) Linksys WRT300N V1 with 0x10000 (0x8000 offset)
And 3 bcm53xx devices:
1) Buffalo WZR-600DHP2 with 0x160000 NVRAM size
2) Buffalo WZR-1750DHP with 0x10000 NVRAM size
3) Netgear R6250 V1 with 0x180000 NVRAM size
(all using 0 offset)
This is an important change as it allows reading whole NVRAM. This may
critical when reading some basic configuration (e.g. switch ports).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46253
SVN-Revision: 46259
projects / openwrt / svn-archive / archive.git / log