drm/vmwgfx: Update the device headers

This change updates the device headers to the latest device version.
Where renaming affects the existing code, it's updated accordingly.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Remove an obsolete __le32 conversion

We've long ago given up on enforcing the device format is always little
endian, so remove a leftover conversion.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>

drm/vmwgfx: Fix host message module function declarations

Make the host message module function declarations similar to the other
declarations in vmwgfx_drv.h and include the header in vmwgfx_msg.c

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>

drm/vmwgfx: Reorganize the fence wait loop

Reorganize the fence wait loop somewhat to make it look more like the
examples in set_current_state() kerneldoc, and add some code comments.

Also if we're about to time out, make sure we check again whether the fence
is actually signaled.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>

drm/vmwgfx: Improve on host message error messages

Make sure the error messages are a bit more descriptive, so that
a log reader may understand what's gone wrong.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

drm/vmwgfx: Add gui_x/y to vmw_connector_state

As gui_x/y positioning is display unit is protected by
requested_layout_mutex adding vmw_connector_state copy of the same and
modeset commit will refer the state copy to sync with modeset_check
state.

v2: Tested with CONFIG_PROVE_LOCKING enabled.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Use a mutex to protect gui positioning in vmw_display_unit

To avoid race condition between update_layout ioctl and modeset ioctl
for access to gui_x/y positioning added a new mutex
requested_layout_mutex.

Also used drm_for_each_connector_iter to iterate over connector list.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Remove primary memory validation against mode while creating fb

This validation is not required because user-space will send create_fb
request once the memory is allocated. This check should be performed
during mode-setting.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Perform memory validations only when need full modeset.

For cases when full modeset is not requested like page-flip, skip
memory validation as the topology is not changed.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Use modeset display memory validation for layout ioctl

Call the same display memory validation function which is used by
modeset_check. This ensure consistency that kernel change preferred
mode/topology only if supported.

Also change the internal function to use drm_rect instead of
drm_vmw_rect.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Perform topology validation during atomic modeset.

This patch adds display (primary) memory validation during modeset
check. Display memory validation are applicable to both SOU and STDU,
so allow both display unit to undergo this check.

Also added check for SVGA_CAP_NO_BB_RESTRICTION capability which lifts
bounding box restriction for STDU.

Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Fix atomic mode set check

vmw_kms_atomic_check_modeset() is currently checking config using the
legacy state, which is updated after a commit has happened.

This means vmw_kms_atomic_check_modeset() will reject an invalid config
on the next update rather than the current one.

Fix this by using the new states for config checking

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Use blocking buffer object reserves when evicting resources

Previously when evicting resources we were unconditionally calling
ttm_eu_reserve_buffers with a NULL ww acquire context. That meant all
buffer object reserves were done using trylock semantics.
That makes sense when evicting during resource validation, because then
there already are a number of buffers reserved and using waiting locks
would cause lockdep errors.

That's not the case when unconditionally evicting all resources as part
of driver takedown or hibernation, so in that code path, make sure
we have a ww acquire context to get waiting lock buffer object reserve
semantics.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

drm/vmwgfx: Optimize the buffer object swap_notify callback somewhat.

Only try to unmap cached maps when the buffer is moved into or out from
vram. Otherwise the underlying pages stay the same.

Also when unbinding resources from MOBs about to move, make sure we're
really moving out of MOB memory.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>

drm/vmwgfx: Move buffer object related code to vmwgfx_bo.c

It makes more sense to have all the buffer object related code in
a single file rather than splitting it up between the resource code
and buffer object pinning utilities.

Place all buffer object related code in vmwgfx_bo.c. Fix up headers
and export resource functionality when needed in the buffer object
code.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>

drm/vmwgfx: Replace vmw_dma_buffer with vmw_buffer_object

Initially vmware buffer objects were only used as DMA buffers, so the name
DMA buffer was a natural one. However, currently they are used also as
dumb buffers and MOBs backing guest backed objects so renaming them to
buffer objects is logical. Particularly since there is a dmabuf subsystem
in the kernel where a dma buffer means something completely different.

This also renames user-space api structures and IOCTL names
correspondingly, but the old names remain defined for now and the ABI
hasn't changed.

There are a couple of minor style changes to make checkpatch happy.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>

drm: Change deadlock-avoidance algorithm for the modeset locks.

For modeset locks we don't expect a high number of contending
transactions so change algorithm from Wait-Die to Wound-Wait.

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Ingo Molnar <mingo@kernel.org>

locking: Implement an algorithm choice for Wound-Wait mutexes

The current Wound-Wait mutex algorithm is actually not Wound-Wait but
Wait-Die. Implement also Wound-Wait as a per-ww-class choice. Wound-Wait
is, contrary to Wait-Die a preemptive algorithm and is known to generate
fewer backoffs. Testing reveals that this is true if the
number of simultaneous contending transactions is small.
As the number of simultaneous contending threads increases, Wait-Wound
becomes inferior to Wait-Die in terms of elapsed time.
Possibly due to the larger number of held locks of sleeping transactions.

Update documentation and callers.

Timings using git://people.freedesktop.org/~thomash/ww_mutex_test
tag patch-18-06-15

Each thread runs 100000 batches of lock / unlock 800 ww mutexes randomly
chosen out of 100000. Four core Intel x86_64:

Algorithm    #threads       Rollbacks  time
Wound-Wait   4              ~100       ~17s.
Wait-Die     4              ~150000    ~19s.
Wound-Wait   16             ~360000    ~109s.
Wait-Die     16             ~450000    ~82s.

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Co-authored-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@kernel.org>

locking: WW mutex cleanup

Make the WW mutex code more readable by adding comments, splitting up
functions and pointing out that we're actually using the Wait-Die
algorithm.

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Co-authored-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'drm-misc-next-2018-06-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 4.19:

Cross-subsystem Changes:
devicetree documentation
dt-bindings defintions for sun8i (Jernej Skrabec)

Core Changes:
Consider drivers setting DRIVER_ATOMIC as atomic (Eric Anholt)
Improvements for in-kernel clients (Noralf Trønnes)
Export and rename drm_crtc_port_mask() (Jernej Skrabec)

Driver Changes:
v3d: Add looking for GPU scheduler jobs management (Eric Anholt)
Add Ilitek ILI9881c panel driver(Maxime Ripard)
rockchip: vop: fixup linebuffer mode calc error (Sandy Huang)
tinydrm: new driver for ILI9341 display panels (David Lechner)
sun4i: Add TCON TOP driver (Jernej Skrabec)

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628010018.GA10929@juma

Merge tag 'drm-intel-next-2018-06-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Chris is doing many reworks that allow us to get full-ppgtt supported
on all platforms back to HSW. As well many other fix and improvements,
Including:
- Use GEM suspend when aborting initialization (Chris)
- Change i915_gem_fault to return vm_fault_t (Chris)
- Expand VMA to Non gem object entities (Chris)
- Improve logs for load failure, but quite logging on fault injection to avoid noise on CI (Chris)
- Other page directory handling fixes and improvements for gen6 (Chris)
- Other gtt clean-up removing redundancies and unused checks (Chris)
- Reorder aliasing ppgtt fini (Chris)
- Refactor of unsetting obg->mm.pages (Chris)
- Apply batch location restrictions before pinning (Chris)
- Ringbuffer fixes for context restore (Chris)
- Execlist fixes on freeing error pointer on allocation error (Chris)
- Make closing request flush mandatory (Chris)
- Move GEM sanitize from resume_early to resume (Chris)
- Improve debug dumps (Chris)
- Silent compiler for selftest (Chris)
- Other execlists changes to improve hangcheck and reset.
- Many gtt page directory fixes and improvements (Chris)
- Reorg context workarounds (Chris)
- Avoid ERR_PTR dereference on selftest (Chris)

Other GEM related work:
- Stop trying to reset GPU if reset failed (Mika)
- Add HW workaround for KBL to fix GPU reset (Mika)
- Fix context ban and hang accounting for client (Mika)
- Fixes on OA perf (Michel, Jani)
- Refactor on GuC log mechanisms (Piotr)
- Enable provoking vertex fix on Gen9 system (Kenneth)

More ICL patches for Display enabling:
- ICL - 10-bit support for HDMI (RK)
- ICL - Start adding TBT PLL (Paulo)
- ICL - DDI HDMK level selection (Manasi)
- ICL - GMBUS GPIO pin mapping fix (Mahesh)
- ICL - Adding DP_AUX_E support (James)
- ICL - Display interrupts handling (DK)

Other display fixes and improvements:
- Fix sprite destination color keying on SKL+ (Ville)
- Fixes and improvements on PCH detection, specially for non PCH systems (Jani)
- Document PCH_NOP (Lucas)
- Allow DBLSCAN user modes with eDP/LVDS/DSI (Ville)
- Opregion and ACPI cleanup and organization (Jani)
- Kill delays when activation psr (Rodrigo)
- ...and a consequent fix of the psr activation flow (DK)
- Fix HDMI infoframe setting (Imre)
- Fix Display interrupts and modes on old gens (Ville)
- Start switching to kernel unsigned int types (Jani)
- Introduction to Amber Lake and Whiskey Lake platforms (Jose)
- Audio clock fixes for HBR3 (RK)
- Standardize i915_reg.h definitions according to our doc and checkpatch (Paulo)
- Remove unused timespec_to_jiffies_timeout function (Arnd)
- Increase the scope of PSR wake fix for other VBTs out there (Vathsala)
- Improve debug msgs with prop name/id (Ville)
- Other clean up on unecessary cursor size defines (Ville)
- Enforce max hdisplay/hblank_start limits on HSW/BDW (Ville)
- Make ELD pointers constant (Jani)
- Fix for PSR VBT parse (Colin)
- Add warn about unsupported CDCLK rates (Imre)

Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 21 Jun 2018 07:12:10 AM AEST
# gpg:                using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg:                 aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C  E2A3 FA62 5F64 0EEB 13CA
Link: https://patchwork.freedesktop.org/patch/msgid/20180625165622.GA21761@intel.com

drm/sun4i: DW HDMI: Expand algorithm for possible crtcs

drm_of_find_possible_crtcs() doesn't work when DW HDMI encoder is
connected to TCON (crtc) through mux in TCON TOP.

In that case TCON TOP HDMI mux input port has to be manually traversed
and checked if it matches any known crtc.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-23-jernej.skrabec@siol.net

drm: of: Export and rename drm_crtc_port_mask()

Function is useful when drm_of_find_possible_crtcs() can't be used and
custom parsing is needed. This can happen for example when there is a
node with multiple muxes between crtc and encoder.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[maxime: change the function to have a consistent prefix]
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-22-jernej.skrabec@siol.net

drm/sun4i: Add support for A64 HDMI PHY

PHY is the same as in H3, except it can switch between two clock
parents.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-21-jernej.skrabec@siol.net

drm/sun4i: Add support for second clock parent to DW HDMI PHY clk driver

Expand HDMI PHY clock driver to support second clock parent.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-20-jernej.skrabec@siol.net

drm/sun4i: DW HDMI PHY: Add support for second PLL

Some DW HDMI PHYs, like those found in A64 and R40 SoCs, can select
between two clock parents.

Add code which reads second PLL from DT.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-19-jernej.skrabec@siol.net

drm/sun4i: Don't change clock bits in DW HDMI PHY driver

DW HDMI PHY driver and PHY clock driver share same registers. Make sure
that DW HDMI PHY setup code doesn't change any clock related bits.
During initialization, set PHY PLL parent bit to 0.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-18-jernej.skrabec@siol.net

drm/sun4i: Enable DW HDMI PHY clock

Current DW HDMI PHY code never prepares and enables PHY clock after it is
created. It's just used as it is. This may work in some cases, but it's
clearly wrong. Fix it by adding proper calls to enable/disable PHY
clock.

Fixes: 4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-17-jernej.skrabec@siol.net

dt-bindings: display: sun4i-drm: Add description of A64 HDMI PHY

A64 HDMI PHY is similar to H3 HDMI PHY except it has two possible PLL
clock parents. It is compatible to other HDMI PHYs, like that found in
R40.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-16-jernej.skrabec@siol.net

drm/sun4i: Add support for R40 mixers

Both mixers have similar capabilities as others SoCs with DE2.

First mixer has 1 VI and 3 UI planes and supports HW scaling on all
planes.

Second mixer has 1 VI and 1 UI planes and also supports HW scaling on
all planes.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-15-jernej.skrabec@siol.net

drm/sun4i: Don't check for panel or bridge on TV TCONs

TV TCONs are always connected to TV or HDMI encoder, so it doesn't make
sense to check if panel or bridge is connected to them.

Check if TCON has channel 0 and only then check for connected panel or
bridges.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-13-jernej.skrabec@siol.net

drm/sun4i: Don't check for LVDS and RGB when TCON has only ch1

LVDS and RGB interfaces are always connected to TCONs which have channel
0. It doesn't make sense to try to init them on TV TCONs.

Add a check if TCON has channel 0 before trying to init LVDS or RGB
interface.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-12-jernej.skrabec@siol.net

drm/sun4i: tcon: Generalize engine search algorithm

Current "old" method to find engine worked pretty well for DE2. However,
it doesn't work when TCON TOP is between  mixer (engine) and TCON. TCON
TOP has multiple input ports, but current engine search algorithm
expects only one.

This can be fixed by first looking for output port id and selecting
matching input by subtracting 1 for the next round. This work even if
there is only one input and output.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-11-jernej.skrabec@siol.net

drm/sun4i: Don't skip TCONs if they don't have channel 0

TV TCONs (channel 1 only) are always connected to TV or HDMI encoder.
Because of that, all output endpoints on such TCON node will point to a
encoder which is part of component framework.

Correct current graph traversing algorithm in such way that it doesn't
skip output enpoints with id 0 on TV TCONs.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-10-jernej.skrabec@siol.net

drm/sun4i: Add support for traversing graph with TCON TOP

TCON TOP is different from other nodes in graph by having 3 input and 3
output ports. Additionally, connection to TV TCON might lead back to
HDMI mux input port, creating loops.

Add support for traversing such graph.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-9-jernej.skrabec@siol.net

drm/sun4i: Split out code for enumerating endpoints in output port

Until now, each node has one input port and one output port. However,
with TCON TOP this is no longer true. It has 3 input and 3 output ports.

In order to prepare to this situation, split out the code which checks
all endpoints in input port and adds available components to fifo.

This patch doesn't do any functional change.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-8-jernej.skrabec@siol.net

drm/sun4i: Fix releasing node when enumerating enpoints

sun4i_drv_add_endpoints() has a memory leak since it uses of_node_put()
when remote is equal to NULL and does nothing when remote has a valid
pointer.

Invert the logic to fix memory leak.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-7-jernej.skrabec@siol.net

drm/sun4i: Add TCON TOP driver

As already described in DT binding, TCON TOP is responsible for
configuring display pipeline. In this initial driver focus is on HDMI
pipeline, so TVE and LCD configuration is not implemented.

Implemented features:
- HDMI source selection
- clock driver (TCON and DSI gating)
- connecting mixers and TCONS

Something similar also existed in previous SoCs, except that it was part
of first TCON.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-6-jernej.skrabec@siol.net

dt-bindings: display: sunxi-drm: Add TCON TOP description

TCON TOP main purpose is to configure whole display pipeline. It
determines relationships between mixers and TCONs, selects source TCON
for HDMI, muxes LCD and TV encoder GPIO output, selects TV encoder
clock source and contains additional TV TCON and DSI gates.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-5-jernej.skrabec@siol.net

drm/tinydrm: new driver for ILI9341 display panels

This adds a new driver for display panels that use the Ilitek ILI9341
controller. It currently supports a single display panel, namely
the YX240QV29-T (e.g. Adafruit 2.4" TFT).

The init sequence is from the Adafruit Python library for the ILI9341
controller. https://github.com/adafruit/Adafruit_Python_ILI9341

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525193623.15533-5-david@lechnology.com

dt-bindings: new binding for Ilitek ILI9341 display panels

This adds a new binding for Ilitek ILI9341 display panels. It includes
a compatible string for one display (more can be added in the future).

The YX240QV29-T panel[1] is found, for example, in an Adafruit breakout
board[2] and in Mindsensors' PiStorms[3].

The vendor prefix "adafruit" is used because the actual vendor is not
known, but Adafruit is the most common source for a product that
contains this panel.

[1]: https://cdn-learn.adafruit.com/assets/assets/000/046/879/original/SPEC-YX240QV29-T_Rev.A__1_.pdf
[2]: https://www.adafruit.com/product/2478
[3]: http://www.mindsensors.com/stem-with-robotics/13-pistorms-v2-base-kit-raspberry-pi-brain-for-lego-robot

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525193623.15533-4-david@lechnology.com

dt-bindings: Add vendor prefix for Adafruit

This adds a device tree vendor prefix for Adafruit Industries, LLC.

Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525193623.15533-3-david@lechnology.com

MAINTAINERS: fix path to ilitek, ili9225 device tree bindings

This fixes the path to the ilitek,ili9225 device tree binding file.

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525193623.15533-2-david@lechnology.com

drm/rockchip: vop: fixup linebuffer mode calc error

linebuffer mode should be LB_YUV_3840X5 when width is bigger than 1280
in yuv mode.

Separate yuv and rgb case makes the scl_vop_cal_lb_mode() logic clearer.

Signed-off-by: Sandy Huang <hjc@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1530001004-25036-1-git-send-email-hjc@rock-chips.com

drm/rockchip: Use drm_crtc_mask()

Use drm_crtc_mask() where appropriate.

Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-7-ville.syrjala@linux.intel.com

drm/gma500: Fix compile warning

Fix the following compile warning:

warning: unused variable ‘psbfb’ [-Wunused-variable]
  struct psb_framebuffer *psbfb = to_psb_fb(fb);

Fixes: c7cbed560ce2 ("drm/gma500: Fix Medfield for drm_framebuffer move")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625123355.GA16757@embeddedor.com

drm/gma500: Fix potential NULL pointer dereference

fb is being dereferenced before it is null checked, hence there
is a potential null pointer dereference.

Fix this by moving the pointer dereference after fb has been
properly null checked at line 74: if (!fb)

Addresses-Coverity-ID: 1470169 ("Dereference before null check")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625121844.GA12466@embeddedor.com

drm/gma500: Replace drm_gem_object_unreference_unlocked with put function

This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625152148.29555-1-contact@tzimmermann.org

drm/panel: Add Ilitek ILI9881c panel driver

The LHR050H41 panel is the panel shipped with the BananaPi M2-Magic, and is
based on the Ilitek ILI9881c Controller. Add a driver for it, modelled
after the other Ilitek controller drivers.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/acb5453112ab7c7b801cf4f1669e351b391e77e8.1527587352.git-series.maxime.ripard@bootlin.com

dt-bindings: panel: Add the Ilitek ILI9881c panel documentation

The LHR050H41 from BananaPi is a 1280x700 4-lanes DSI panel based on the
ILI9881c from Ilitek.

Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a348cdd07d3287e8203ee8d840ea279fe10a6204.1527587352.git-series.maxime.ripard@bootlin.com

drm: kirin: Remove useless "Scale not support" error message

The driver doesn't support scaling, but when an atomic test is done
it repeatedly spits out this warning which isn't particularly useful.

So just remove the error message.

Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Peter Griffin <peter.griffin@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1529622076-20386-1-git-send-email-john.stultz@linaro.org

drm: Make ioctls available for in-kernel clients

Make ioctl wrappers for functions that will be used by the in-kernel API.
The following functions are touched:
- drm_mode_create_dumb_ioctl()
- drm_mode_destroy_dumb_ioctl()
- drm_mode_addfb()
- drm_mode_rmfb()

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618141739.48151-4-noralf@tronnes.org

drm/file: Don't set master on in-kernel clients

It only makes sense for userspace clients.

Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618141739.48151-3-noralf@tronnes.org

drm: provide management functions for drm_file

Rather than doing drm_file allocation/destruction right in the fops, lets
provide separate helpers. This decouples drm_file management from the
still-mandatory drm-fops. It prepares for use of drm_file without the
fops, both by possible separate fops implementations and APIs (not that I
am aware of any such plans), and more importantly from in-kernel use where
no real file is available.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618141739.48151-2-noralf@tronnes.org

drm/omap: remove now unused functions

Some functions are unused after removal of the kmap_atomic
DMA-buf interface.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: f664a5269542 ("dma-buf: remove kmap_atomic interface")
Link: https://patchwork.freedesktop.org/series/45245/
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Consider drivers setting DRIVER_ATOMIC as atomic.

Drivers such as vc4 don't initialize mode_config.funcs until later in
initialization, but we know they're atomic since they've got the flag
set.  This avoids oopsing on dereferencing funcs in the new atomic
methods sanity checks.

I moved the atomic check function down below the core flag check, to
avoid needing a prototype.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: ba1f665f161c ("drm: Add checks for atomic_[duplicate/destroy]_state with atomic drivers")
Link: https://patchwork.freedesktop.org/patch/msgid/20180621195428.17447-1-eric@anholt.net
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/omap: remove now unused functions

Some functions are unused after removal of the kmap_atomic
DMA-buf interface.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: f664a5269542 ("dma-buf: remove kmap_atomic interface")
Link: https://patchwork.freedesktop.org/series/45245/

Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-next

First feature request for 4.19.  Highlights:
- Add initial amdgpu documentation
- Add initial GPU scheduler documention
- GPU scheduler fixes for dying processes
- Add support for the JPEG engine on VCN
- Switch CI to use powerplay by default
- EDC support for CZ
- More powerplay cleanups
- Misc DC fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180621161138.3008-1-alexander.deucher@amd.com

Merge tag 'drm-misc-next-2018-06-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 4.19:

UAPI Changes:
- Add writeback connector (Brian Starkey/Liviu Dudau)
- Add "content type" property to HDMI connectors (Stanislav Lisovskiy)

Cross-subsystem Changes:
- some devicetree Docs update
- fix compile breakage on ION due to the dma-buf cleanups (Christian König)

Core Changes:
- Reject over-sized allocation requests early (Chris Wilson)
- gem-fb-helper: Always do implicit sync (Daniel Vetter)
- dma-buf cleanups (Christian König)

Driver Changes:
- Fixes for the otm8009a panel driver (Philippe Cornu)
- Add Innolux TV123WAM panel driver support (Sandeep Panda)
- Move GEM BO to drm_framebuffer in few drivers (Daniel Stone)
- i915 pinning improvements (Chris Wilson)
- Stop consulting plane->fb/crtc in a few drivers (Ville Syrjälä)

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180621105428.GA20795@juma

Merge tag 'drm-intel-next-2018-06-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Ice Lake's display enabling patches (Jose, Mahesh, Dhinakaran, Paulo, Manasi, Anusha, Arkadiusz)
- Ice Lake's workarounds (Oscar and Yunwei)
- Ice Lake interrupt registers fixes (Oscar)
- Context switch timeline fixes and improvements (Chris)
- Spelling fixes (Colin)
- GPU reset fixes and improvements (Chris)
  - Including fixes on execlist and preemption for a proper GPU reset (Chris)
- Clean-up the port pipe select bits (Ville)
- Other execlist improvements (Chris)
- Remove unused enable_cmd_parser parameter (Chris)
- Fix order of enabling pipe/transcoder/planes on HSW+ to avoid hang on ICL (Paulo)
- Simplification and changes on intel_context (Chris)
- Disable LVDS on Radiant P845 (Ondrej)
- Improve HSW/BDW voltage swing handling (Ville)
- Cleanup and renames on few parts of intel_dp code to make code clear and less confusing (Ville)
- Move acpi lid notification code for fixing LVDS (Chris)
- Speed up GPU idle detection (Chris)
- Make intel_engine_dump irqsafe (Chris)
- Fix GVT crash (Zhenyu)
- Move GEM BO inside drm_framebuffer and use intel_fb_obj everywhere (Chris)
- Revert edp's alternate fixed mode (Jani)
- Protect tainted function pointer lookup (Chris)
  - And subsequent unsigned long size fix (Chris)
- Allow page directory allocation to fail (Chris)
- VBT's edp and lvds fix and clean-up (Ville)
- Many other reorganizations and cleanups on DDI and DP code, as well on scaler and planes (Ville)
- Selftest pin the mock kernel context (Chris)
- Many PSR Fixes, clean-up and improvements (Dhinakaran)
- PSR VBT fix (Vathsala)
- Fix i915_scheduler and intel_context declaration (Tvrtko)
- Improve PCH underruns detection on ILK-IVB (Ville)
- Few s/drm_priv/i915 (Chris, Michal)
- Notify opregion of the sanitized encoder state (Maarten)
- Guc's event handling improvements and fixes on initialization failures (Michal)
- Many gtt fixes and improvements (Chris)
- Fixes and improvements for Suspend and Freeze safely (Chris)
- i915_gem init and fini cleanup and fixes (Michal)
- Remove obsolete switch_mm for gen8+ (Chris)
- hw and context id fixes for GuC (Lionel)
- Add new vGPU cap info bit VGT_CAPS_HUGE_GTT (Changbin)
- Make context pin/unpin symmetric (Chris)
- vma: Move the bind_count vs pin_count assertion to a helper (Chris)
- Use available SZ_1M instead of 1 << 20 (Chris)
- Trace and PMU fixes and improvements (Tvrtko)

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611162737.GA2378@intel.com

drm/v3d: Remove the bad signaled() implementation.

Since our seqno value comes from a counter associated with the GPU
ring, not the entity (aka client), they'll be completed out of order.
There's actually no need for this code at all, since we don't have
enable_signaling() and thus DMA_FENCE_SIGNALED_BIT will be set before
we could be called.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180605190302.18279-2-eric@anholt.net
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

drm/v3d: Take a lock across GPU scheduler job creation and queuing.

Between creation and queueing of a job, you need to prevent any other
job from being created and queued.  Otherwise the scheduler's fences
may be signaled out of seqno order.

v2: move mutex unlock to the error label.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Link: https://patchwork.freedesktop.org/patch/msgid/20180606174851.12433-1-eric@anholt.net
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>

drm/bridge: Move the struct drm_bridge member kerneldoc inline.

This makes it more likely that the docs stay updated with the code.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180606190431.1833-1-eric@anholt.net
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

gpu: drm: vc4: Adding new typedef vm_fault_t

Use new return type vm_fault_t for fault handler.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>

drm: Document mode_config.max_width/height as the max fb dimensions

The meaning of the mode_config max_width/height fields has not been
entirely clear. They are used both as the max framebuffer dimensions,
and they are also used by drm_mode_getconnector() to filter out
any mode whose hdisplay/vdisplay exceed those limits.

Let's put it in writing that max_width/height only refrer to the max
framebuffer dimensions, and should those be higher than the hardware
limits for display timings the driver must validate the latter using
some other means.

We'll keep the max_width/height usage in drm_mode_getconnector()
because setcrtc treats hdisplay/vdisplay also as the primary plane
width, and having a plane bigger than the max fb size doesn't make
much sense (if we ignore scaling that is). It all works out fine
as long as the max fb dimensions are at least equal to the max
timing limits. If the opposite were true we may want to rethink
what drm_mode_getconnector() does. Maybe do the mode filtering
only for non-atomic userspace?

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615173939.11353-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

staging: android: ion: fix ion_dma_buf_attach signatur

Fixup for "dma_buf: remove device parameter from attach callback v2".

I missed this driver, sorry for the noise. Patch is not even compile
tested.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/230641/

drm/i915: Update DRIVER_DATE to 20180620

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/icl: Add 10-bit support for hdmi

Starting Icelake silicon supports 10-bpc hdmi to support certain
media workloads. Currently hdmi supports 8 and 12 bpc. Plumbed
in support for 10 bit hdmi.

Cc: James Ausmus <james.ausmus@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180522002558.29262-18-paulo.r.zanoni@intel.com

drm/i915/psr: fix copy-paste error with setting of tp2_wakeup_time_us

Currently for the psr_table->tp2_tp3_wakeup_time case 3 there appears
to be a copy-paste error from the previous switch statement where
dev_priv->vbt.psr.tp1_wakeup_time_us is being assigned and I believe
it should be dev_priv->vbt.psr.tp2_tp3_wakeup_time_us that should be
assigned instead.

Detected by CoverityScan, CID#1470105 ("Copy-paste error")

Fixes: 77312ae8f071 ("drm/i915/psr: vbt change for psr")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180620132543.28092-1-colin.king@canonical.com

drm/i915/psr: Fix warning in intel_psr_activate()

commit 5422b37c907e ("drm/i915/psr: Kill delays when activating psr
back.") removed the call to cancel a scheduled psr_work from
psr_disable() and instead added an early return in the work function. But,
if the scheduled work item is executed after psr_enable(), we end up
printing warnings as PSR is already enabled and active. So, put the
cancel_work call back in psr_disable().

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Fixes: 5422b37c907e ("drm/i915/psr: Kill delays when activating psr back.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106948
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618220207.2778-1-dhinakaran.pandiyan@intel.com

drm/i915/selftests: Remove unused dmabuf->kmap routines, fix the build

Fix i915's CI build after the removal of the dmabuf->kmap interface that
left the mock routines intact.

In file included from drivers/gpu/drm/i915/i915_gem_dmabuf.c:335:0:
drivers/gpu/drm/i915/selftests/mock_dmabuf.c:104:13: error: ‘mock_dmabuf_kunmap_atomic’ defined but not used [-Werror=unused-function]
 static void mock_dmabuf_kunmap_atomic(struct dma_buf *dma_buf, unsigned long page_num, void *addr)
drivers/gpu/drm/i915/selftests/mock_dmabuf.c:97:14: error: ‘mock_dmabuf_kmap_atomic’ defined but not used [-Werror=unused-function]
 static void *mock_dmabuf_kmap_atomic(struct dma_buf *dma_buf, unsigned long page_num)

Fixes: f664a5269542 ("dma-buf: remove kmap_atomic interface")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180620162152.1158-1-chris@chris-wilson.co.uk
Reviewed-by: Christian König <christian.koenig@amd.com>

Merge drm-upstream/drm-next into drm-misc-next

We got a few conflicts in drm_atomic.c after merging the DRM writeback support,
now we need a backmerge to unlock develop development on drm-misc-next.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>

drm: writeback: Add client capability for exposing writeback connectors

Due to the fact that writeback connectors behave in a special way
in DRM (they always report being disconnected) we might confuse some
userspace. Add a client capability for writeback connectors that will
filter them out for clients that don't understand the capability.

Changelog:
 - only accept the capability if the client has already set the
DRM_CLIENT_CAP_ATOMIC one.

Cc: Sean Paul <seanpaul@chromium.org>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/229038/

drm: writeback: Add out-fences for writeback connectors

Add the WRITEBACK_OUT_FENCE_PTR property to writeback connectors, to
enable userspace to get a fence which will signal once the writeback is
complete. It is not allowed to request an out-fence without a
framebuffer attached to the connector.

A timeline is added to drm_writeback_connector for use by the writeback
out-fences.

In the case of a commit failure or DRM_MODE_ATOMIC_TEST_ONLY, the fence
is set to -1.

Changes from v2:
 - Rebase onto Gustavo Padovan's v9 explicit sync series
 - Change out_fence_ptr type to s32 __user *
 - Set *out_fence_ptr to -1 in drm_atomic_connector_set_property
 - Store fence in drm_writeback_job
 Gustavo Padovan:
 - Move out_fence_ptr out of connector_state
 - Signal fence from drm_writeback_signal_completion instead of
   in driver directly

Changes from v3:
 - Rebase onto commit 7e9081c5aac7 ("drm/fence: fix memory overwrite
   when setting out_fence fd") (change out_fence_ptr to s32 __user *,
   for real this time.)
 - Update documentation around WRITEBACK_OUT_FENCE_PTR

Signed-off-by: Brian Starkey <brian.starkey@arm.com>
[rebased and fixed conflicts]
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/229036/

drm: Add writeback connector type

Writeback connectors represent writeback engines which can write the
CRTC output to a memory framebuffer. Add a writeback connector type and
related support functions.

Drivers should initialize a writeback connector with
drm_writeback_connector_init() which takes care of setting up all the
writeback-specific details on top of the normal functionality of
drm_connector_init().

Writeback connectors have a WRITEBACK_FB_ID property, used to set the
output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the
supported writeback formats to userspace.

When a framebuffer is attached to a writeback connector with the
WRITEBACK_FB_ID property, it is used only once (for the commit in which
it was included), and userspace can never read back the value of
WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is
attached to a CRTC.

Changes since v1:
 - Added drm_writeback.c + documentation
 - Added helper to initialize writeback connector in one go
 - Added core checks
 - Squashed into a single commit
 - Dropped the client cap
 - Writeback framebuffers are no longer persistent

Changes since v2:
 Daniel Vetter:
 - Subclass drm_connector to drm_writeback_connector
 - Relax check to allow CRTC to be set without an FB
 - Add some writeback_ prefixes
 - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary
 Gustavo Padovan:
 - Add drm_writeback_job to handle writeback signalling centrally

Changes since v3:
 - Rebased
 - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS

Chances since v4:
 - Embed a drm_encoder inside the drm_writeback_connector to
   reduce the amount of boilerplate code required from the drivers
   that are using it.

Changes since v5:
 - Added Rob Clark's atomic_commit() vfunc to connector helper
   funcs, so that writeback jobs are committed from atomic helpers
 - Updated create_writeback_properties() signature to return an
   error code rather than a boolean false for failure.
 - Free writeback job with the connector state rather than when
   doing the cleanup_work()

Changes since v7:
 - fix extraneous use of out_fence that is only introduced in a
   subsequent patch.

Changes since v8:
 - whitespace changes pull from subsequent patch

Changes since v9:
 - Revert the v6 changes that free the writeback job in the connector
   state cleanup and return to doing it in the cleanup_work() function

Signed-off-by: Brian Starkey <brian.starkey@arm.com>
[rebased and fixed conflicts]
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
[rebased and added atomic_commit() vfunc for writeback jobs]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/229037/

dma-buf: remove kmap_atomic interface

Neither used nor correctly implemented anywhere. Just completely remove
the interface.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/226645/

dma_buf: remove device parameter from attach callback v2

The device parameter is completely unused because it is available in the
attachment structure as well.

v2: fix kerneldoc as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/226643/

drm/vc4: Always obey implicit sync

Same justification as for drm_gem_fb_prepare_fb.

Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-9-daniel.vetter@ffwll.ch
Link: https://patchwork.freedesktop.org/patch/msgid/20180409085134.27321-1-daniel.vetter@ffwll.ch

drm/gem-fb-helper: Always do implicit sync

I've done a lot of history digging. The first signs of this
optimization was introduced in i915:

commit 25067bfc060d1a481584dcb51ef4b5680176ecb6
Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Date:   Wed Sep 10 12:03:17 2014 -0300

    drm/i915: pin sprite fb only if it changed

without much justification. Pinning already pinned stuff is real cheap
(it's just obj->pin_count++ really), and the missing implicit sync was
entirely forgotten about it seems. It's at least not mentioned
anywhere it the commit message.

It was also promptly removed shortly afterwards in

commit ea2c67bb4affa84080c616920f3899f123786e56
Author: Matt Roper <matthew.d.roper@intel.com>
Date:   Tue Dec 23 10:41:52 2014 -0800

    drm/i915: Move to atomic plane helpers (v9)

again without really mentioning the side-effect that plane updates
with the same fb now again obey implicit syncing.

Note that this only ever applied to the plane_update hook, all other
legacy entry points (set_base, page_flip) always obeyed implicit sync
in the drm/i915 driver.

The real source of this code here seems to be msm, copied to vc4, then
copied to tinydrm. I've also tried to dig around in all available msm
sources, but the corresponding check for fb != old_fb is present ever
since the initial merge in

commit cf3a7e4ce08e6876cdcb80390876647f28a7cf8f
Author: Rob Clark <robdclark@gmail.com>
Date:   Sat Nov 8 13:21:06 2014 -0500

    drm/msm: atomic core bits

The only older version I've found of msm atomic code predates the
atomic helpers, and so didn't even use any of this. It also does not
have a corresponding check (because it simply did no implicit sync at
all).

I've chatted with Rob on irc, and he didn't remember the reason for
this either.

Note we had epic amounts of fun with too much syncing against
_vblank_, especially around cursor updates. But I don't ever
discussing a need for less syncing against implicit fences.

Also note that explicit fencing allows you to sidetrack all of this,
at least for all the drivers correctly implemented using
drm_atomic_set_fence_for_plane().

Given that it seems to be an accident of history, and that big drivers
like i915 (and also nouveau it seems, I didn't follow the
amdgpu/radeon sync code to figure this out properly there) never have
done it, let's remove this.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-8-daniel.vetter@ffwll.ch

drm/i915/selftests: Avoid ERR_PTR dereference

Along the early error path for igt_switch_to_kernel_context we may try
to dereference an invalid error pointer. Instead, return early rather
than dump the GEM trace since we haven't yet emitted anything of
interest.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 09a4c02e58c1 ("drm/i915: Look for an active kernel context before switching")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180620112441.13085-1-chris@chris-wilson.co.uk

Merge tag 'gvt-next-2018-06-19' of https://github.com/intel/gvt-linux into drm-intel-next-queued

gvt-next-2018-06-19

- fine-grained per vgpu locking (Colin)
- fine-grained vgpu scheduler locking (Colin)
- deliver windows guest cursor hotspot info (Tina)
- GVT-g BXT support (Colin)
- other misc and checker fixes (Chris, Xinyun)

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180619090043.ly6gquafbmxuus6h@zhen-hp.sh.intel.com

drm/amdgpu: Use correct enum to set powergating state

Use enum amd_powergating_state instead of enum amd_clockgating_state.
The underlying value stays the same, so there is no functional change
in practise. This fixes a warning seen with clang:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1930:14: warning: implicit
      conversion from enumeration type 'enum amd_clockgating_state' to
      different enumeration type 'enum amd_powergating_state'
      [-Wenum-conversion]
                                                       AMD_CG_STATE_UNGATE);
                                                       ^~~~~~~~~~~~~~~~~~~

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct GART location info

Avoid confusing the GART with the GTT domain.

Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: update ib_start/size_alignment same as windows used

PAGE_SIZE for start_alignment is far much than hw requirement,
And now, update to expereince value from window side.

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu: display: use modern ktime accessors

getrawmonotonic64() is deprecated because of the nonstandard naming.

The replacement functions ktime_get_raw_ns() also simplifies the callers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gpu: drm: ttm: Adding new return type vm_fault_t

Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.

Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t")

Previously vm_insert_{mixed,pfn} returns err which driver
mapped into VM_FAULT_* type. The new function
vmf_insert_{mixed,pfn} will replace this inefficiency by
returning VM_FAULT_* type.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gpu: drm: radeon: Adding new typedef vm_fault_t

Use new return type vm_fault_t for fault handler
in vm_operations_struct.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/audio: constify ELD pointers

The hooks aren't supposed to modify the ELD, so use const pointer. As a
drive-by fix, use drm_eld_size() to log ELD size.

Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180619124437.10982-1-jani.nikula@intel.com

drm/i915: Enforce max hdisplay/hblank_start limits on HSW/BDW FDI

The PCH transcoder registers are only 12 bits wide for the hdisplay
and hblank_start values. On HSW/BDW the CPU side registers are 13
bits wide. intel_mode_valid() only checks against the higher limit
(since we don't know where the mode is to be used), so an extra
check is required against the FDI limits.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615174406.12258-3-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

drm/i915: Check timings against hardware maximums

Validate that all display timings fit within the number of bits
we have in the transcoder timing registers.

The limits are:
hsw+:
 4k: vdisplay, vblank_start
 8k: everything else
gen3+:
 4k: h/vdisplay, h/vblank_start
 8k: everything else
gen2:
 2k: h/vdisplay, h/vblank_start
 4k: everything else

Also document the fact that the mode_config.max_width/height limits
refer to just the max framebuffer dimensions we support. Which may
be larger than the max hdisplay/vdisplay.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615174406.12258-2-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

drm/i915: Nuke the cursor size defines

No point in having this extra indireciton for the cursor max size.
So drop the defines and just write out the raw numbers. Makes it
easier to see what's going on.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615174406.12258-1-ville.syrjala@linux.intel.com
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

drm/i915: Print prop name/id when rejecting it

Use the '[PROP:id:name]' format I introduced for the core in the driver
debug messages as well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180611193403.16118-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/psr: Adds psrwake options for all platforms

Adds new psrwake options defined in the below table.
Platform PSR wake options vbt version
KBL/CFL/WHL All(205+)
BXT Uses old interpretation.
CNL/ICL+ All(205+)
GLK All(205+)
SKL All PV releases (Check for 205+ might help but cannot be foolproof)

We will continue with newer interpretation for SKL from 205.

v2: Jani
    Keep the bdb version check.
v3:
    Apply newer version for skl from 205+(DK).
    Add (version check && platform list) (Jani).
    Add bdb version for each platform in commit message(DK).

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Puthikorn Voravootivat <puthik@chromium.org>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Ashutosh D Shukla <ashutosh.d.shukla@intel.com>
Cc: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1529302326-3567-1-git-send-email-vathsala.nagaraju@intel.com

i915: remove timespec_to_jiffies_timeout

This function has been unused since commit 5ed0bdf21a85 ("drm: i915:
Use nsec based interfaces"). Let's remove the definition as well now
to help get rid of all uses of 'timespec'.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618153855.2126048-1-arnd@arndb.de

drm/i915/icl: Handle hotplug interrupts for DP over TBT

This patch enables hotplug interrupts for DP over TBT output on TC
ports. The TBT interrupts are enabled and handled irrespective of the
actual output type which could be DP Alternate, DP over TBT, native DP
or native HDMI.

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180616000530.5357-3-paulo.r.zanoni@intel.com

drm/i915/icl: Support for TC North Display interrupts

The hotplug interrupts for the ports can be routed to either North
Display or South Display depending on the output mode. DP Alternate or
DP over TBT outputs will have hotplug interrupts routed to the North
Display while interrupts for legacy modes will be routed to the South
Display in PCH. This patch adds hotplug interrupt handling support for
DP Alternate mode.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
[Paulo: coding style changes]
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180616000530.5357-2-paulo.r.zanoni@intel.com

drm/i915/icl: GSE interrupt moves from DE_MISC to GU_MISC

The Graphics System Event(GSE) interrupt bit has a new location in the
GU_MISC_INTERRUPT_{IIR, ISR, IMR, IER} registers. Since GSE was the only
DE_MISC interrupt that was enabled, with this change we don't enable/handle
any of DE_MISC interrupts for gen11. Credits to Paulo for pointing out
the register change.

v2: from DK
raw_reg_[read/write], branch prediction hint and drop platform check (Mika)

v3: From DK
Early re-enable of master interrupt (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
[Paulo: bikesheds and rebases]
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180616000530.5357-1-paulo.r.zanoni@intel.com

drm/i915/i915_reg.h: fix the checkpatch MACRO_ARG_PRECEDENCE issues

While I don't see any issue with the way these macros are being called
today, let's protect them against operator precedence issues before
they happen.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180612235654.7914-4-paulo.r.zanoni@intel.com

drm/i915/i915_reg.h: fix the checkpatch SPACE_BEFORE_TAB issues

Since I'm touching the file I might as well fix this class of errors
since they are just a few. Also drive-by fix the styling of the
VLV_TURBO_SOC_OVERRIDE definitions instead of just the spaces before
the tabs.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180612235654.7914-3-paulo.r.zanoni@intel.com

drm/i915/i915_reg.h: fix the checkpatch SPACING issues

Because OCD.

Now seriously, commit 1aa920ea0e85 ("drm/i915: add register macro
definition style guide") has finally established a coding standard to
be followed by the rest of the file, and I've been trying to request
everybody to adhere to that since then. The problem is that when
someone adds a new line to a register that has the wrong style, these
people generally propagate the wrong style and I have to keep asking
them to drive-by fix the whole register, which is not something I like
to do and also creates extra work for them. Or I can ignore the
propagation of the wrong coding style and feel anxious about it. On
top of that, we now have our CI happily reminding us about these
problems, which makes everything worse.

So IMHO the best way to proceed is to fix the spacing issues in the
file once and for all. Contributors will stop propagating the bad
style when adding new bits to registers that already have bad style,
we will stop asking them to redo their patches and the CI emails will
become more relevant by having less semi-false errors.

Yes, there will be some pain involved for backporters, but at least
spacing issues like that are easy to spot and fix in the patch files.

This patch was generated by:

../../../../scripts/checkpatch.pl -f --strict --types SPACING \
--fix-inplace i915_reg.h

I manually checked the output and everything seems sane.

v2: Single conflict around the addition of DP_TP_CTL_LINK_TRAIN_PAT4.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618180943.894-1-paulo.r.zanoni@intel.com