John Crispin [Sat, 14 Feb 2015 20:48:08 +0000 (20:48 +0000)]
brcm2708: add board detection and LED support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44447
John Crispin [Sat, 14 Feb 2015 20:47:58 +0000 (20:47 +0000)]
uci-defaults: add ucidef_set_led_mmc
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44446
Nicolas Thill [Sat, 14 Feb 2015 13:53:51 +0000 (13:53 +0000)]
package/valgrind: fix build on eglibc
configure tries to guess pagesize by calling getconf, provided by eglibc and compiled for the target, not the host.
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44445
Nicolas Thill [Sat, 14 Feb 2015 13:53:44 +0000 (13:53 +0000)]
generic: ocf: irq compat stuff is not needed anymore
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44444
Imre Kaloz [Sat, 14 Feb 2015 12:21:34 +0000 (12:21 +0000)]
fix typo
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44443
Imre Kaloz [Sat, 14 Feb 2015 10:45:12 +0000 (10:45 +0000)]
generic: upgrade to 3.18.7
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 44442
John Crispin [Fri, 13 Feb 2015 10:54:01 +0000 (10:54 +0000)]
ixp4xx: fix gpio_line_set() logic, fixes #18986
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44439
John Crispin [Fri, 13 Feb 2015 10:53:54 +0000 (10:53 +0000)]
hostapd: backport BSSID black/whitelists
This change adds the configuration options "bssid_whitelist" and
"bssid_blacklist" used to limit the AP selection of a network to a
specified (finite) set or discard certain APs.
This can be useful for environments where multiple networks operate
using the same SSID and roaming between those is not desired. It is also
useful to ignore a faulty or otherwise unwanted AP.
In many applications it is useful not just to enumerate a group of well
known access points, but to use a address/mask notation to match an
entire set of addresses (ca:ff:ee:00:00:00/ff:ff:ff:00:00:00).
This is especially useful if an OpenWrt device with two radios is used to
retransmit the same network (one in AP mode for other clients, one as STA for
the uplink); the following configuration prevents the device from associating
with itself, given that the own AP to be avoided is using the bssid
'C0:FF:EE:D0:0D:42':
config wifi-iface
option device 'radio2'
option network 'uplink'
option mode 'sta'
option ssid 'MyNetwork'
option encryption 'none'
list bssid_blacklist 'C0:FF:EE:D0:0D:42/00:FF:FF:FF:FF:FF'
This change consists of the following cherry-picked upstream commits:
b3d6a0a8259002448a29f14855d58fe0a624ab76
b83e455451a875ba233b3b8ac29aff8b62f064f2
79cd993a623e101952b81fa6a29c674cd858504f
(squashed to implement bssid_{white,black}lists)
0047306bc9ab7d46e8cc22ff9a3e876c47626473
(Add os_snprintf_error() helper)
Signed-off-by: Stefan Tomanek <stefan.tomanek+openwrt@wertarbyte.de>
SVN-Revision: 44438
John Crispin [Fri, 13 Feb 2015 07:42:13 +0000 (07:42 +0000)]
kexec-tools: bump version from v2.0.4 to v2.0.9.
- kexec-tools is now distributed with tarballs of .tar.gz and .tar.xz
format; .tar.bz2 are not provided anymore.
- Add CONFIG_KEXEC_LZMA for selecting lzma support.
Patches are updated along to:
- Remove the now unnecessary patch 0004-mips_regdefs.patch.
- Drop 100-reduce_size.patch because the size reduction is marginal.
- Allow zlib and lzma support coexist together. This patch has been
merged into upstream project.
- Fix kexec-tools' configure.ac.
- Fix a few compilation warnings.
Size comparison of stripped binaries of kexec malta target with both
zlib and lzma support enabled.
- Before: 41447
- After: 42583
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 44437
John Crispin [Fri, 13 Feb 2015 07:42:05 +0000 (07:42 +0000)]
kexec-tools: show up only when KERNEL_KEXEC is enabled.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 44436
John Crispin [Fri, 13 Feb 2015 07:38:38 +0000 (07:38 +0000)]
brcm2708-gpu-fw: simplify target dependencies
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44435
John Crispin [Fri, 13 Feb 2015 07:38:33 +0000 (07:38 +0000)]
brcm2708: fix spidev
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44434
John Crispin [Fri, 13 Feb 2015 07:38:27 +0000 (07:38 +0000)]
brcm2708: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44433
John Crispin [Fri, 13 Feb 2015 07:38:00 +0000 (07:38 +0000)]
brcm2708: add missing config symbols and fix kernel modules for Raspberry Pi 2 by removing local version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44432
John Crispin [Fri, 13 Feb 2015 07:37:55 +0000 (07:37 +0000)]
brcm2708: add subtarget copyright and use better board names
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44431
John Crispin [Fri, 13 Feb 2015 07:29:32 +0000 (07:29 +0000)]
ar7: switch to v3.18
Thank you Dimitri for testing this.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44430
John Crispin [Fri, 13 Feb 2015 07:29:25 +0000 (07:29 +0000)]
generic: improve kexec support of MIPS.
- Allow --command-line parameters of kexec-tools be parsed and used by
the kernel.
- For malta machine, mark kernel code and kernel data segments as
"System RAM" instead of "reserved" in /proc/iomem, otherwise
kexec-tools will complain that program segments in ELF kernel file
are invalid.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 44429
John Crispin [Fri, 13 Feb 2015 07:29:17 +0000 (07:29 +0000)]
lantiq: fix DGN3500 root device
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
SVN-Revision: 44428
John Crispin [Fri, 13 Feb 2015 07:29:10 +0000 (07:29 +0000)]
ar71xx: Add profile and build image for TP-Link MR12U v1
This patch adds corrected profile and build image for the TL-MR12U board.
Unfortunately i cannot test the factory image since i can't find anywhere
the original chinese firmware but
the generated openwrt-ar71xx-generic-tl-mr12u-v1-squashfs-sysupgrade.bin
worked just fine over a modified mr3040 factory image i managed to modify
to initially flash the mr12u from the original firmware.
Proper kernel support probably should be added since cat /proc/cpuinfo shows
MR13U.
Signed-off-by: Daniel Petre <daniel.petre@gmail.com>
SVN-Revision: 44427
John Crispin [Fri, 13 Feb 2015 07:29:03 +0000 (07:29 +0000)]
ar71xx: Add user-space support for TP-Link MR12U v1
This patch adds user-space support for the TL-MR12U board based on the mr13u patches.
Signed-off-by: Daniel Petre <daniel.petre@gmail.com>
SVN-Revision: 44426
John Crispin [Fri, 13 Feb 2015 07:28:53 +0000 (07:28 +0000)]
ar71xx: ZyXEL NBG6716 add gpio usb power on/off
ZyXEL NBG6716 add missing GPIO USB power on/off
Signed-off-by: Marcin Mikolajczak <gr4ffy at gmail.com>
SVN-Revision: 44425
Rafał Miłecki [Thu, 12 Feb 2015 20:13:20 +0000 (20:13 +0000)]
kernel: mtdsplit_uimage: fix passed info about buf size
We obviously can't use sizeof(*buf) which is always 1.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44424
Nicolas Thill [Thu, 12 Feb 2015 17:30:09 +0000 (17:30 +0000)]
sunxi: A20-OLinuXino-Lime profile rename leftover
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44423
Luka Perkov [Thu, 12 Feb 2015 14:39:26 +0000 (14:39 +0000)]
kirkwood: Seagate GoFlex Net
Add GoFlex Net "Board Name" , set and cleanup network default and LEDs.
Remove kmod-rtc-marvell from default packages, as the GoFlex net does not have a RTC.
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 44422
John Crispin [Thu, 12 Feb 2015 11:15:56 +0000 (11:15 +0000)]
lantiq: make m25p80 work again
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44421
John Crispin [Thu, 12 Feb 2015 09:17:04 +0000 (09:17 +0000)]
lantiq: fix mac addr assignment inside lantiq_etop
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44420
John Crispin [Thu, 12 Feb 2015 08:23:45 +0000 (08:23 +0000)]
lantiq: PCI should be enabled on vrx200
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44419
John Crispin [Thu, 12 Feb 2015 08:07:39 +0000 (08:07 +0000)]
ralink: make the mt7621 irq core with with the new CM api
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44418
John Crispin [Thu, 12 Feb 2015 08:07:27 +0000 (08:07 +0000)]
ar71xx: ZyXEL NBG6716 led/buttons cleanup
ZyXEL NBG6716 led/buttons cleanup
- improper numbered leds
- improper named buttons
Signed-off-by: Marcin Mikolajczak <gr4ffy at gmail.com>
SVN-Revision: 44417
John Crispin [Thu, 12 Feb 2015 08:07:20 +0000 (08:07 +0000)]
generic: fix broken patch in the transition of 3.19 from -rc5 to release .0
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 44416
Rafał Miłecki [Thu, 12 Feb 2015 07:50:07 +0000 (07:50 +0000)]
kernel: mtdsplit_uimage: read more data to match Edimax needs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44415
Rafał Miłecki [Thu, 12 Feb 2015 07:44:34 +0000 (07:44 +0000)]
kernel: mtdsplit_uimage: use separated buffer for reading data
We shouldn't read data directly into the header struct, as some devices
(e.g. Edimax) need more bytes due to some extra header.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44414
Rafał Miłecki [Thu, 12 Feb 2015 07:23:40 +0000 (07:23 +0000)]
kernel: mtdsplit_uimage: add parser for Edimax devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44413
Rafał Miłecki [Thu, 12 Feb 2015 06:57:24 +0000 (06:57 +0000)]
mtdsplit_uimage: more generic header verify function
Some devices have uImage headers after some extra headers (e.g. Edimax
devices). To support such cases our verify callback function should be
allowed to return header offset, not just a boolean value.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44412
Rafał Miłecki [Wed, 11 Feb 2015 18:11:22 +0000 (18:11 +0000)]
kernel: fix bgmac check for chip ID
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44411
Rafał Miłecki [Wed, 11 Feb 2015 17:35:09 +0000 (17:35 +0000)]
kernel: backport mainlined bgmac patches from 3.19
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44410
Jo-Philipp Wich [Wed, 11 Feb 2015 15:12:32 +0000 (15:12 +0000)]
base-files: fix target/subtarget value in /etc/openwrt_release
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44409
Rafał Miłecki [Wed, 11 Feb 2015 14:41:07 +0000 (14:41 +0000)]
bcm53xx: use bcm47xx_wdt for restarting device
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44408
John Crispin [Wed, 11 Feb 2015 13:50:56 +0000 (13:50 +0000)]
oxnas: disable usbgadget support
usbgadget was initially enabled in the hope to support gadget mode
as it seems to be supported by the hardware.
However, it currently breaks things and doesn't work anyway, so
remove the usbgadget feature.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44407
John Crispin [Wed, 11 Feb 2015 13:50:40 +0000 (13:50 +0000)]
brcm2708-gpu-fw: revert to github releases, adapt to bcm2708 target changes and add back InstallDev
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44406
John Crispin [Wed, 11 Feb 2015 13:09:39 +0000 (13:09 +0000)]
brcm2708: add missing SUBTARGETS:= to makefile
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44405
John Crispin [Wed, 11 Feb 2015 13:05:37 +0000 (13:05 +0000)]
brcm2708: remove CMA_DEBUG
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44404
John Crispin [Wed, 11 Feb 2015 13:05:31 +0000 (13:05 +0000)]
brcm2708: add Raspberry Pi 2 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44403
John Crispin [Wed, 11 Feb 2015 13:05:23 +0000 (13:05 +0000)]
brcm2708: remove 3.14 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44402
John Crispin [Wed, 11 Feb 2015 13:05:14 +0000 (13:05 +0000)]
ralink: fix when tx done is 0 also need to clean interrupt status
Signed-off-by: michael lee <igvtee@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44401
John Crispin [Wed, 11 Feb 2015 13:05:07 +0000 (13:05 +0000)]
mt76: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44400
Nicolas Thill [Wed, 11 Feb 2015 12:13:49 +0000 (12:13 +0000)]
ramips/mt7620: add missing config symbol
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44399
Nicolas Thill [Wed, 11 Feb 2015 11:31:38 +0000 (11:31 +0000)]
oprofile: mark broken on uml
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44398
Nicolas Thill [Wed, 11 Feb 2015 11:31:26 +0000 (11:31 +0000)]
config: disable kernel tracing on uml
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44397
Nicolas Thill [Wed, 11 Feb 2015 11:31:07 +0000 (11:31 +0000)]
ebtables: disable rpath
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44396
Nicolas Thill [Wed, 11 Feb 2015 11:31:01 +0000 (11:31 +0000)]
util-linux: disable rpath
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44395
Nicolas Thill [Wed, 11 Feb 2015 11:30:56 +0000 (11:30 +0000)]
toolchain/gcc: fix an ICE on ARM (PR58595)
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58595
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44394
John Crispin [Wed, 11 Feb 2015 10:21:02 +0000 (10:21 +0000)]
cns3xxx: set v3.18 as default
tested on a nor and a spi laguna
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44393
John Crispin [Wed, 11 Feb 2015 10:17:55 +0000 (10:17 +0000)]
brcm2708: update to v3.18
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44392
John Crispin [Wed, 11 Feb 2015 10:17:38 +0000 (10:17 +0000)]
lantiq: fix VG3503J partition table for newer kernels
the kernel has increased and does not fit into the 1,5MB anymore.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44391
Rafał Miłecki [Wed, 11 Feb 2015 10:11:00 +0000 (10:11 +0000)]
bcm53xx: backport bcm47xx_wdt changes to 3.18 to use this driver in future
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44390
Felix Fietkau [Wed, 11 Feb 2015 10:09:57 +0000 (10:09 +0000)]
relayd: update to the latest version, adds fixes by Alejandro Enrique
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44389
John Crispin [Wed, 11 Feb 2015 10:09:56 +0000 (10:09 +0000)]
malta: add config file for kernel 3.19.
This is based on config-3.18 with the following changes.
- CONFIG_GENERIC_NET_UTILS is removed as it is already set in generic
kernel config.
- CONFIG_CPU_MICROMIPS is explicitly unset as required in kernel 3.19.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 44388
John Crispin [Wed, 11 Feb 2015 10:09:40 +0000 (10:09 +0000)]
generic: add a few missing symbols for generic config-3.19.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 44387
John Crispin [Wed, 11 Feb 2015 10:09:23 +0000 (10:09 +0000)]
ipq806x: update target to v3.18
Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.
This new kernel have been tested on AP148, which seems to works fine.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44386
Rafał Miłecki [Wed, 11 Feb 2015 10:04:51 +0000 (10:04 +0000)]
kernel: backport bcma patches queued for 3.20
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44385
Rafał Miłecki [Wed, 11 Feb 2015 09:14:48 +0000 (09:14 +0000)]
kernel: 3.18: complete backport of some bcma patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44384
Rafał Miłecki [Wed, 11 Feb 2015 08:42:34 +0000 (08:42 +0000)]
bcm53xx: drop unused (and broken) GPIOLIB patch
First of all this patch was broken since adding 3.18 for bcm53xx. It was
modifying ARCH_BRCMSTB instead of ARCH_BCM_5301X.
Secondly we don't need it as ARCH_MULTIPLATFORM selects
ARCH_WANT_OPTIONAL_GPIOLIB for us.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44383
Luka Perkov [Tue, 10 Feb 2015 22:36:59 +0000 (22:36 +0000)]
kernel: switch 3.19 from -rc5 to release .0
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44381
Jo-Philipp Wich [Tue, 10 Feb 2015 18:55:44 +0000 (18:55 +0000)]
libevent2: remove defunct download mirror
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44380
Jo-Philipp Wich [Tue, 10 Feb 2015 15:49:36 +0000 (15:49 +0000)]
rules.mk: don't add staging_dir/host/bin/ path again
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44379
Jo-Philipp Wich [Tue, 10 Feb 2015 15:49:17 +0000 (15:49 +0000)]
include: export staging_dir/host/bin path from within host.mk (#18957)
We need to do that to pickup the prereq-build prepared symlinks for auxillary
operations like metadata scanning.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44378
Jo-Philipp Wich [Tue, 10 Feb 2015 15:48:48 +0000 (15:48 +0000)]
scripts: extend rstrip.sh to remove bad rpaths
Remove all rpath entries which do not point to a location below /lib or
/usr/lib and which do not begin with '$ORIGIN'.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44377
Jo-Philipp Wich [Tue, 10 Feb 2015 15:48:32 +0000 (15:48 +0000)]
tools: add patchelf host build
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44376
John Crispin [Tue, 10 Feb 2015 05:52:53 +0000 (05:52 +0000)]
ar71xx: add mc-mac1200r to do_load_ath10k_board_bin()
This patch adds the mc-mac1200r target to do_load_ath10k_board_bin() in
target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin to load the
ath10k radio MAC address from the EEPROM in MERCURY MAC1200R devices
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 44375
John Crispin [Tue, 10 Feb 2015 05:52:48 +0000 (05:52 +0000)]
oxnas: switch to 3.18
Tested on stg212 and kd20.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44374
John Crispin [Tue, 10 Feb 2015 05:52:41 +0000 (05:52 +0000)]
kernel: add missing symbol
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44373
John Crispin [Mon, 9 Feb 2015 19:34:49 +0000 (19:34 +0000)]
ralink: fix hw status almost full not work on mt7620 and mt7621
the old FE_INT_STATUS register becomes two registers.
FE_INT_STATUS and INT_STATUS. so the hw status almost full
must change to read from FE_INT_STATUS register.
tx/rx done read from INT_STATUS register.
mt7620 datasheet define CNT_GDM1_AF at BIT(29).
but after test it should be BIT(13). why?
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44371
John Crispin [Mon, 9 Feb 2015 19:34:32 +0000 (19:34 +0000)]
ralink: change rt3883 cpu type to 74kc
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44370
John Crispin [Mon, 9 Feb 2015 19:28:34 +0000 (19:28 +0000)]
realview: r44368 contained a superflous patch
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44369
John Crispin [Mon, 9 Feb 2015 19:24:48 +0000 (19:24 +0000)]
realview: bump to 3.18
Signed-off-by: Your Name <blogic@openwrt.org>
SVN-Revision: 44368
Rafał Miłecki [Mon, 9 Feb 2015 18:43:05 +0000 (18:43 +0000)]
bcm53xx: fix loading SPROM content by bcma init change
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44367
John Crispin [Mon, 9 Feb 2015 18:15:30 +0000 (18:15 +0000)]
kernel: add missing symbol to realtek wifi
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44366
Steven Barth [Mon, 9 Feb 2015 15:26:35 +0000 (15:26 +0000)]
openssl: fix upstream regression for non-ec builds
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44364
John Crispin [Mon, 9 Feb 2015 14:24:00 +0000 (14:24 +0000)]
ixp4xx: add v3.18 support
Signed-off-by: Your Name <blogic@openwrt.org>
SVN-Revision: 44363
Jo-Philipp Wich [Mon, 9 Feb 2015 12:54:29 +0000 (12:54 +0000)]
rpcd: fix session.{login,list,destroy} method signatures
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44362
Steven Barth [Mon, 9 Feb 2015 12:44:32 +0000 (12:44 +0000)]
polarssl: bump to 1.3.10, work around rename to mbedtls
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44361
John Crispin [Mon, 9 Feb 2015 12:17:00 +0000 (12:17 +0000)]
ar71xx: dir-505: fix reset button gpio active_low value
Fix 'active_low' default value for the reset button on DIR-505.
Signed-off-by: Rocco Folino <rocco@devzen.net>
SVN-Revision: 44360
John Crispin [Mon, 9 Feb 2015 12:16:51 +0000 (12:16 +0000)]
ar71xx: Add support for MERCURY MAC1200R
This patch adds support for MERCURY MAC1200R, a dual band 802.11bgn + 802.11ac
router based on the AR9344, with QCA988x ath10k radio and 5 Fast Ethernet ports
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 44359
John Crispin [Mon, 9 Feb 2015 12:16:43 +0000 (12:16 +0000)]
ar71xx: fix nbg6716 power and usb led
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Marcin Mikolajczak <gr4ffy@gmail.com>
SVN-Revision: 44358
John Crispin [Mon, 9 Feb 2015 12:16:04 +0000 (12:16 +0000)]
oxnas: copy ubinized images to binary folder
Since r43778 ubinized images are stored inside KDIR. This makes sense
when using an uninized image to generate a factory image.
On oxnas ubinized images were used for sysupgrade before proper NAND
support was implemented in OpenWrt.
For users still on old builds before sysupgrade.tar was introduced,
ubinized image is thus the only option to conveniantly upgrade to a
more recent build.
Copy ubinized image also to BIN_DIR, so it will be easier for users
to find them.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44357
John Crispin [Mon, 9 Feb 2015 12:15:45 +0000 (12:15 +0000)]
ramips: Kingston MLW221 and MLWG2 cleanup
MLW221 dts use tabs NOT spaces.
MLWG2 dts typo and 1 tab not spaces
01_leds and diag.sh cleanup
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 44356
John Crispin [Mon, 9 Feb 2015 12:15:17 +0000 (12:15 +0000)]
ramips: fix mt76 radio pcie location definition for in Xiaomi MiWiFi Mini
This patch sets the correct location of the mt76 radio in the pcie bridge
(pcie-bridge instead of pcie0). Additionaly, it disables the 2.4 GHz band.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 44355
John Crispin [Mon, 9 Feb 2015 12:15:00 +0000 (12:15 +0000)]
ramips: Add mt76 node for Lenovo Y1 and Y1S.
Both Y1 and Y1S have MT7612E wireless chip so I submitted this patch.
Tested on Lenovo Y1.
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
SVN-Revision: 44354
John Crispin [Mon, 9 Feb 2015 12:14:48 +0000 (12:14 +0000)]
lantiq: td-w8970: fix failsafe mode
Fix failsafe mode for TD-W8970, register interface for preinit.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 44353
John Crispin [Mon, 9 Feb 2015 12:14:32 +0000 (12:14 +0000)]
lantiq: td-w8970: fix reset button
For TP-LINK TD-W8970 button should work as "reset", not "BTN_1".
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 44352
John Crispin [Mon, 9 Feb 2015 12:14:22 +0000 (12:14 +0000)]
lantiq: fix typo in script
Fix typo in firmware installer script.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 44351
John Crispin [Mon, 9 Feb 2015 12:14:09 +0000 (12:14 +0000)]
octeon: switch to 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44350
John Crispin [Mon, 9 Feb 2015 12:13:55 +0000 (12:13 +0000)]
ralink: add 3.18 support
keep default as 3.14, mt7621 gic need to be ported to 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44349
John Crispin [Mon, 9 Feb 2015 12:13:25 +0000 (12:13 +0000)]
lantiq: add 3.18 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44348
John Crispin [Mon, 9 Feb 2015 12:12:52 +0000 (12:12 +0000)]
lantiq: fix dsl drivers for 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44346
John Crispin [Mon, 9 Feb 2015 12:12:39 +0000 (12:12 +0000)]
au1000: add 3.18 support
this is only compile tested
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44345
John Crispin [Mon, 9 Feb 2015 12:12:30 +0000 (12:12 +0000)]
ar7: add 3.18 support
this is only compile tested
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44344
John Crispin [Mon, 9 Feb 2015 12:12:09 +0000 (12:12 +0000)]
ar7-atm: make it compile under 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44343
John Crispin [Mon, 9 Feb 2015 12:11:34 +0000 (12:11 +0000)]
malta: drop 3.10 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44342
projects / openwrt / staging / jow.git / log