Jonas Gorski [Fri, 6 Sep 2013 19:01:13 +0000 (19:01 +0000)]
brcm63xx: switch to linux 3.10
3.10 is stable enough, and 3.9 is EOL since a while.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37910
Steven Barth [Thu, 5 Sep 2013 21:13:51 +0000 (21:13 +0000)]
odhcp6c: more compatibility fixes
SVN-Revision: 37907
Jonas Gorski [Thu, 5 Sep 2013 20:30:34 +0000 (20:30 +0000)]
kernel: b53: support phy ids for BCM5365
BCM5365 (and probably other older variants) use a different phy id, so
the phy driver never attached for them.
Fix this by adding the appropriate phy id to the fixup and the phy
driver.
Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 37906
Hauke Mehrtens [Thu, 5 Sep 2013 20:17:28 +0000 (20:17 +0000)]
mac80211: kmod-rtl_pci: fix dependencies
This fixes the following error:
rtl_pci: Unknown symbol rtl_lps_leave (err 0)
rtl_pci: Unknown symbol rtl_lps_enter (err 0)
rtl8192ce: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192ce: Unknown symbol rtl_pci_probe (err 0)
rtl8192de: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192de: Unknown symbol rtl_pci_probe (err 0)
rtl8192se: Unknown symbol rtl_pci_disconnect (err 0)
rtl8192se: Unknown symbol rtl_pci_probe (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37905
Hauke Mehrtens [Thu, 5 Sep 2013 19:57:44 +0000 (19:57 +0000)]
kernel: kmod-libphy, kmod-tg3: fix load order
This fixes the following error:
tg3: Unknown symbol mdiobus_alloc_size (err 0)
tg3: Unknown symbol phy_ethtool_sset (err 0)
tg3: Unknown symbol phy_mii_ioctl (err 0)
tg3: Unknown symbol phy_connect (err 0)
tg3: Unknown symbol mdiobus_register (err 0)
tg3: Unknown symbol mdiobus_free (err 0)
tg3: Unknown symbol phy_start (err 0)
tg3: Unknown symbol phy_start_aneg (err 0)
tg3: Unknown symbol mdiobus_unregister (err 0)
tg3: Unknown symbol phy_ethtool_gset (err 0)
tg3: Unknown symbol phy_stop (err 0)
tg3: Unknown symbol phy_disconnect (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37904
Hauke Mehrtens [Thu, 5 Sep 2013 19:56:04 +0000 (19:56 +0000)]
kernel: kmod-ssb, kmod-b44: fix load order
This fixes the following error:
b44: Unknown symbol ssb_device_is_enabled (err 0)
b44: Unknown symbol ssb_pcicore_dev_irqvecs_enable (err 0)
b44: Unknown symbol ssb_bus_may_powerdown (err 0)
b44: Unknown symbol ssb_pcihost_register (err 0)
b44: Unknown symbol ssb_device_disable (err 0)
b44: Unknown symbol ssb_device_enable (err 0)
b44: Unknown symbol ssb_driver_unregister (err 0)
b44: Unknown symbol __ssb_driver_register (err 0)
b44: Unknown symbol ssb_bus_powerup (err 0)
b44: Unknown symbol ssb_clockspeed (err 0)
b44: Unknown symbol ssb_dma_translation (err 0)
Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37903
Hauke Mehrtens [Thu, 5 Sep 2013 19:53:21 +0000 (19:53 +0000)]
kernel: kmod-firewire: fix dependencies
This fixes the following error:
firewire_core: Unknown symbol crc_itu_t (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37902
Hauke Mehrtens [Thu, 5 Sep 2013 19:43:38 +0000 (19:43 +0000)]
mac80211: do not download carl9170 firmware separately, but use the one from linux-firemware
linux-firemware contains the same version we loaded without this patch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37901
Hauke Mehrtens [Thu, 5 Sep 2013 19:41:00 +0000 (19:41 +0000)]
kernel: kmod-fs-xfs: fix dependencies
This fixes the following error:
xfs: Unknown symbol exportfs_decode_fh (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37900
Hauke Mehrtens [Thu, 5 Sep 2013 19:39:55 +0000 (19:39 +0000)]
kernel: kmod-usb-serial-keyspan: fix dependencies
This fixes the following error:
keyspan: Unknown symbol ezusb_fx1_ihex_firmware_download (err 0)
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37899
Hauke Mehrtens [Thu, 5 Sep 2013 19:35:14 +0000 (19:35 +0000)]
ath10k: enable Atheros 802.11ac driver
This enables usage of the ath10k driver on OpenWrt. Only 2.0 PCI hardware
is supported. The ath10k firmware is currently only available
through github so use that as its source for now.
This goes build tested, not run time tested.
[Hauke: I did some minor changes]
Cc: ath10k@lists.infradead.org
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: Mathieu Olivari <mathieu@qca.qualcomm.com>
Cc: Jerome Proffit <jproffit@qca.qualcomm.com>
Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Cc: Matthew McClintock <mmcclint@qca.qualcomm.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37898
Imre Kaloz [Thu, 5 Sep 2013 10:08:59 +0000 (10:08 +0000)]
Add missing symbol
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 37897
Hauke Mehrtens [Wed, 4 Sep 2013 16:15:10 +0000 (16:15 +0000)]
kernel: b53: allow access the MIB counters on BCM5365
b53_no_ops has no elements and b53_port_ops has one element, this makes
the code access some random memory when trying to access the mib
counter functions.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37895
Luka Perkov [Tue, 3 Sep 2013 23:22:16 +0000 (23:22 +0000)]
kobs-ng: add new package
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37894
Jo-Philipp Wich [Tue, 3 Sep 2013 15:46:39 +0000 (15:46 +0000)]
usbreset: rewrite to not rely on /proc/bus/usb anymore
SVN-Revision: 37893
Gabor Juhos [Tue, 3 Sep 2013 07:22:27 +0000 (07:22 +0000)]
ar71xx: fix NetGear initramfs image names
The '-initramfs' string is duplicated in the image names,
fix it.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37892
Steven Barth [Tue, 3 Sep 2013 06:29:46 +0000 (06:29 +0000)]
Fix IPv6 NAT breaking older kernels
SVN-Revision: 37891
Gabor Juhos [Mon, 2 Sep 2013 19:12:54 +0000 (19:12 +0000)]
kernel: update 3.10 to 3.10.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37890
Gabor Juhos [Mon, 2 Sep 2013 19:05:58 +0000 (19:05 +0000)]
ar71xx: image: reorder Image/Build/* macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37889
Gabor Juhos [Mon, 2 Sep 2013 19:05:57 +0000 (19:05 +0000)]
ar71xx: image: simplify more oneliner macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37888
Gabor Juhos [Mon, 2 Sep 2013 19:05:56 +0000 (19:05 +0000)]
ar71xx: image: simplify oneliner loader macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37887
Gabor Juhos [Mon, 2 Sep 2013 19:05:55 +0000 (19:05 +0000)]
ar71xx: image: simplify oneliner initramfs macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37886
Gabor Juhos [Mon, 2 Sep 2013 19:05:54 +0000 (19:05 +0000)]
ar71xx: image: simplify oneliner buildkernel macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37885
Florian Fainelli [Mon, 2 Sep 2013 18:25:10 +0000 (18:25 +0000)]
scripts/feeds: ensure that --ff is enabled
Users may have merge.ff set to false, which will force merge commits to
be generated. The intent here is to have a fast-forward merge when
possible, so let's make sure fast-forwards are enabled.
Signed-off-by: John Szakmeister <john@szakmeister.net>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37884
Florian Fainelli [Mon, 2 Sep 2013 18:25:06 +0000 (18:25 +0000)]
build scripts: fix 'make defconfig' damage
Looking at the target 'defconfig' in include/toplevel, it doesn't
directly reference $(HOME)/.openwrt/defconfig nor does it reference any
prerequisites using it as a target.
Therefore, building "defconfig" as a target uses the defaults in the
tree, but not the defaults that a user might have explicitly specified.
This patch fixes this regression from r36361.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
[florian: apply with the proper patch level, wrap at 80 columns]
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37883
Florian Fainelli [Mon, 2 Sep 2013 18:25:01 +0000 (18:25 +0000)]
mcs814x: dlan-usb-extender: fix usbdev trigger
Every device I connect to the USB port is detected as 2-1, not 1-1.
So adjust the default setting accordingly.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37882
Gabor Juhos [Mon, 2 Sep 2013 18:03:39 +0000 (18:03 +0000)]
ar71xx: optimize kernel generation
When the squashfs and jffs2 images are generated
in the same turn, the compressed kernel images
are generated twice with the same parameters.
Move compressed kernel generation into a separate
phase to avoid that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37881
Gabor Juhos [Mon, 2 Sep 2013 16:33:13 +0000 (16:33 +0000)]
generic: remove linux version checks from myloader.c
The myloader partition parser code uses ifdef wrappers
to make the code usable on kernels below version 3.2.
All targets are using kernel 3.3 at least so the wraper
is not needed. Remove that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37880
Gabor Juhos [Mon, 2 Sep 2013 16:10:44 +0000 (16:10 +0000)]
ar71xx: image: dynamically generate Image/Build/Template/* macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37879
Gabor Juhos [Mon, 2 Sep 2013 16:09:12 +0000 (16:09 +0000)]
ar71xx: configure OBS4 line on TL-WR841N-v8/MR3420v2
It also fixes USB Power on MR3420v2.
This time we took the information from the source of GPL:
http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg18970.html
Confirmed and tested:
https://dev.openwrt.org/ticket/13201#comment:41
Thanks to oguretsagressive for testing.
Signed-off-by: Dmytro <dioptimizer@gmail.com>
SVN-Revision: 37878
Jo-Philipp Wich [Mon, 2 Sep 2013 15:36:51 +0000 (15:36 +0000)]
Add rpcd - an extensible backend server for ubus-over-json-rpc operations, session and acl management.
SVN-Revision: 37877
Gabor Juhos [Mon, 2 Sep 2013 09:24:59 +0000 (09:24 +0000)]
ar71xx: remove fs_* variables from image/Makefile
Those are not needed since we are generating the
initramfs images along with the others.
Remove the variables and use the template names
directly.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37876
Gabor Juhos [Mon, 2 Sep 2013 08:45:32 +0000 (08:45 +0000)]
package/rotary-gpio-custom: fix checkpatch errors module source
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37875
Gabor Juhos [Mon, 2 Sep 2013 08:45:31 +0000 (08:45 +0000)]
package/w1-gpio-custom: fix checkpatch errors in module source
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37874
Gabor Juhos [Mon, 2 Sep 2013 08:45:30 +0000 (08:45 +0000)]
package/i2c-gpio-custom: fix checkpatch errors in module source
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37873
Gabor Juhos [Mon, 2 Sep 2013 08:45:29 +0000 (08:45 +0000)]
package/kernel: add spi-gpio-custom module
The package makes it possible to create custom SPI
buses via GPIO lines.
This module is based on i2c-gpio-custom and allows to
configure an SPI bus via GPIO lines and expose it to
userspace without rebuilding the kernel. This is maily
intended to connect microcontrollers and other simple
SPI devices without making an ad-hoc kernel driver.
Signed-off-by: Marco Burato <zmaster.adsl@gmail.com>
[juhosg:
- change subject,
- extend and reformat commit message,
- cleanup checkpatch errors/warnings in module source]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37872
Gabor Juhos [Mon, 2 Sep 2013 07:42:03 +0000 (07:42 +0000)]
ar71xx: fix initramfs image generation for Cameo933x profiles
Initramfs images are not generated for profiles which
are using the squashfs-only template. Add the missing
'Image/Build/Template/squashfs-only/initramfs' to fix
that.
Also, 'Image/Build/Cameo933x/initramfs' uses wrong
parameters for 'MkuImageLzma/initramfs' due to a
misplaced commma. Remove that to fix the generated
initramfs images.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37871
Gabor Juhos [Mon, 2 Sep 2013 07:36:46 +0000 (07:36 +0000)]
x86/alix2: remove kernel config for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37870
Gabor Juhos [Mon, 2 Sep 2013 07:36:45 +0000 (07:36 +0000)]
x86/alix2: switch to 3.10.9
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.
Russell says in the original patch:
"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built. The patches
required no changes."
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37869
Gabor Juhos [Mon, 2 Sep 2013 07:36:44 +0000 (07:36 +0000)]
x86/alix2: add kernel config for 3.10
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.
Russell says in the original patch:
"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built. The patches
required no changes."
The current patch contains additional configuration tweaks.
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37868
Gabor Juhos [Mon, 2 Sep 2013 07:36:40 +0000 (07:36 +0000)]
x86: add support for 3.10
Add kernel configuration and patches for Linux 3.10.
Taken from the 'alix2: update to LINUX_VERSION 3.10.9'
patch: http://patchwork.openwrt.org/patch/3971/.
Russell says in the original patch:
"Initial whack at updating alix2 to a current kernel. It builds
and runs without problems so far. I copied target/linux/config-3.8,
target/linux/x86/alix2/config-3.8, and target/linux/patches-3.8 to
their 3.10 equivalents and tweaked until it built. The patches
required no changes."
The current patch contains additional configuration tweaks,
and the kernel patches were refreshed.
Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37867
Steven Barth [Sun, 1 Sep 2013 17:59:48 +0000 (17:59 +0000)]
netfilter: Add IPv6-NAT support for kernel and ipt Thanks to Berni, Adam Novak and Sedat Dilek for patches and inspiration
SVN-Revision: 37866
Steven Barth [Sun, 1 Sep 2013 13:46:10 +0000 (13:46 +0000)]
iptables: Update to 1.4.20
SVN-Revision: 37865
Vasilis Tsiligiannis [Sat, 31 Aug 2013 11:16:49 +0000 (11:16 +0000)]
scripts/checkpatch.pl: Fix whitespace errors
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
SVN-Revision: 37864
Vasilis Tsiligiannis [Sat, 31 Aug 2013 11:16:44 +0000 (11:16 +0000)]
scripts/{cleanfile,cleanpatch}: Add scripts for cleaning up file and patch whitespaces
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
SVN-Revision: 37863
Vasilis Tsiligiannis [Sat, 31 Aug 2013 11:15:06 +0000 (11:15 +0000)]
scripts/checkpatch.pl: Remove checks for __setup's documentation
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
SVN-Revision: 37862
Vasilis Tsiligiannis [Sat, 31 Aug 2013 11:15:03 +0000 (11:15 +0000)]
scripts/checkpatch.pl: Remove check for deprecated features
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
SVN-Revision: 37861
Vasilis Tsiligiannis [Sat, 31 Aug 2013 11:14:53 +0000 (11:14 +0000)]
scripts/checkpatch.pl: Introduce 'checkpatch.pl' script
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
SVN-Revision: 37860
Luka Perkov [Thu, 29 Aug 2013 23:06:32 +0000 (23:06 +0000)]
imx6: add uboot-envtools to default packages
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37859
Luka Perkov [Thu, 29 Aug 2013 23:06:31 +0000 (23:06 +0000)]
uboot-imx6: update to v2013.07
Update includes upstream support for Wandboard Quad too.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37858
Luka Perkov [Thu, 29 Aug 2013 23:06:29 +0000 (23:06 +0000)]
uboot-envtools: update to v2013.07
SVN-Revision: 37857
Felix Fietkau [Thu, 29 Aug 2013 22:20:36 +0000 (22:20 +0000)]
netifd: update to the latest version, fixes a bridge handling corner case on config reload
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37856
Florian Fainelli [Wed, 28 Aug 2013 16:19:59 +0000 (16:19 +0000)]
mvebu: remove maintainer ship role
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37855
Felix Fietkau [Wed, 28 Aug 2013 07:38:36 +0000 (07:38 +0000)]
kernel: fix booting issues on imx23 and imx6 targets
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37854
Luka Perkov [Wed, 28 Aug 2013 00:07:43 +0000 (00:07 +0000)]
imx6: disable sdma until license issues are solved
Also, synchronize patches with upstream.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37853
Luka Perkov [Wed, 28 Aug 2013 00:07:41 +0000 (00:07 +0000)]
image: add hooks for kernel/DTB installation in root filesystem
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 37852
Luka Perkov [Wed, 28 Aug 2013 00:07:40 +0000 (00:07 +0000)]
Config.in: improve wording for kernel/DT inclusion flags
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 37851
Luka Perkov [Wed, 28 Aug 2013 00:07:37 +0000 (00:07 +0000)]
imx6: refresh 3.10 kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37850
Gabor Juhos [Tue, 27 Aug 2013 18:06:49 +0000 (18:06 +0000)]
ar71xx: add some pending patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37849
Gabor Juhos [Tue, 27 Aug 2013 12:03:01 +0000 (12:03 +0000)]
kernel: don't hide the 'Warning: unable to open an initial console' message
The 'Warning: unable to open an initial console' message
indicates an error in the rootfs. Remove the patch which
hides the warning.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37848
Gabor Juhos [Tue, 27 Aug 2013 12:02:58 +0000 (12:02 +0000)]
image: ensure that /dev/console exist in rootfs images
Linux expects that the /dev/console node is present in
the rootfs image. Create the node in rootfs images, in
order to make std{in,out,err} usable even in early init
process.
Note: tar.gz and cpio.gz images are not handled yet.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37847
Gabor Juhos [Tue, 27 Aug 2013 12:02:54 +0000 (12:02 +0000)]
kernel: ensure that /dev/console exists in initramfs
Linux expects that the /dev/console node is present
in the rootfs image. Create the node in initramfs,
in order to make std{in,out,err} usable even in early
init process.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37846
Gabor Juhos [Tue, 27 Aug 2013 10:48:25 +0000 (10:48 +0000)]
ar71xx: don't hardwire cpu_has_dsp{,2} to zero
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37845
Gabor Juhos [Tue, 27 Aug 2013 10:48:24 +0000 (10:48 +0000)]
ar71xx: don't register USB device on WNDAP360
Apparently registering usb device on newest trunk causes
this AP not to boot...
Since there is no USB socket in that device anyway this
can be simply removed (and device boots then no problem).
[juhosg:
- tweak subject line and description,
- remove #include "dev-usb.h",
- remove 'select ATH79_DEV_USB' from Kconfig]
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37844
Gabor Juhos [Tue, 27 Aug 2013 10:44:06 +0000 (10:44 +0000)]
mac80211: add a bunch of rt2x00 specific changes
Backport some rt2x00 specific changes from
wireless-testing/master-2013-08-26 to add
support for RT3573 based devices.
Also refresh the rt2x00 specific patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37843
Felix Fietkau [Mon, 26 Aug 2013 17:47:14 +0000 (17:47 +0000)]
kernel: fixing a potential deadlock in block2mtd for kernel 3.6/3.8/3.9
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 37842
Felix Fietkau [Mon, 26 Aug 2013 17:31:27 +0000 (17:31 +0000)]
mklibs: Fix mklibs usage when *.so files reside in subdirs
Currently package/Makefile only passes /lib /usr/lib and /usr/lib/ebtables
to mklibs. However, other libs can also reside in different subdirectories
(in my case /usr/lib/ipsec). Hence, create the list of library directories
dynamically.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 37841
Felix Fietkau [Mon, 26 Aug 2013 17:31:23 +0000 (17:31 +0000)]
mac80211: merge a few ad-hoc mode fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37840
Felix Fietkau [Mon, 26 Aug 2013 17:31:15 +0000 (17:31 +0000)]
mac80211: disable CCK rates for 802.11n clients on brcmsmac to fix crash issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37839
Vasilis Tsiligiannis [Sun, 25 Aug 2013 18:47:08 +0000 (18:47 +0000)]
lldpd: Add libbsd dependency when using eglibc
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
SVN-Revision: 37837
Gabor Juhos [Sun, 25 Aug 2013 14:42:34 +0000 (14:42 +0000)]
x86/alix2: add kmod-usb2-pci to default packages
The USB controller is sitting on the PCI bus and
without the package the EHCI controller is not
usable.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37835
Gabor Juhos [Sat, 24 Aug 2013 10:11:53 +0000 (10:11 +0000)]
ar71xx: build factory image for DIR-505 A1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37834
Gabor Juhos [Sat, 24 Aug 2013 10:11:45 +0000 (10:11 +0000)]
ar71xx: allow to override kernel size in the CameoHornet profile
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37833
Gabor Juhos [Fri, 23 Aug 2013 17:31:04 +0000 (17:31 +0000)]
kernel: update 3.10 to 3.10.9
Also refresh 3.10 patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37832
Gabor Juhos [Fri, 23 Aug 2013 17:31:02 +0000 (17:31 +0000)]
generic: refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37831
Gabor Juhos [Fri, 23 Aug 2013 17:07:28 +0000 (17:07 +0000)]
ramips: remove lantiq specific patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37830
Gabor Juhos [Fri, 23 Aug 2013 17:07:27 +0000 (17:07 +0000)]
ramips: use correct image size parameter for DIR-610 A1
Fixes the following error:
bash: line 0: [: ralink_default_fw_size_4M: integer expression expected
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37829
Gabor Juhos [Fri, 23 Aug 2013 17:07:26 +0000 (17:07 +0000)]
ramips: use correct parameters in the Seama template
Fixes DIR-645 image generation errors:
bash: line 0: [: wrgn39_dlob.hans_dir645: integer expression expected
...
bash: wrgn39_dlob.hans_dir645 - 64: syntax error: invalid arithmetic operator (error token is ".hans_dir645 - 64") make[4]: *** [install] Error 1
Signed-off-by: Michael Lee <igvtee@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37828
Gabor Juhos [Fri, 23 Aug 2013 17:07:25 +0000 (17:07 +0000)]
ramips: update the RT3883 PCI patch
Fix the following warning:
arch/mips/pci/pci-rt3883.c: In function 'rt3883_pci_probe':
arch/mips/pci/pci-rt3883.c:458:4: warning: use of 'h' length modifier with 'a' type character [-Wformat]
Signed-off-by: Michael Lee <igvtee@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37827
Gabor Juhos [Fri, 23 Aug 2013 17:07:20 +0000 (17:07 +0000)]
kernel/3.10: backport of_pci_get_devfn function from 3.11
Fixes the following build error on ramips/rt3883:
arch/mips/pci/pci-rt3883.c:488:3: error: implicit declaration of function \
'of_pci_get_devfn' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
Although the function is only used by the PCI driver
of the RT3883 SoC but at the moment but it might be
useful for other targets as well.
Signed-off-by: Michael Lee <igvtee@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37826
Zoltan Herpai [Thu, 22 Aug 2013 23:56:19 +0000 (23:56 +0000)]
kernel: add checksum for 3.10.9
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 37825
Zoltan Herpai [Thu, 22 Aug 2013 19:30:46 +0000 (19:30 +0000)]
imx23: bump kernel to 3.10.9
SVN-Revision: 37824
Zoltan Herpai [Thu, 22 Aug 2013 19:29:07 +0000 (19:29 +0000)]
imx23: add support for u-boot image build
SVN-Revision: 37823
Zoltan Herpai [Thu, 22 Aug 2013 19:28:06 +0000 (19:28 +0000)]
uboot-imx23: add new package for i.MX233 boards
SVN-Revision: 37822
Luka Perkov [Wed, 21 Aug 2013 23:17:08 +0000 (23:17 +0000)]
netfilter: fix typo
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37821
Felix Fietkau [Wed, 21 Aug 2013 20:59:25 +0000 (20:59 +0000)]
kernel: crashlog: Avoid out-of-bounds write
vsnprintf returns the number of chars that would have been written, not
the actual number of chars written. This can lead to crashlog_buf->len
being too big which in turn can lead to get_maxlen() returning negative
numbers. The length argument of kmsg_dump_get_buffer will be casted to
a size_t which makes a negative input a big positive number allowing
kmsg_dump_get_buffer to write out of bounds.
Fix this by using vscnprintf which returns the actually written number
of chars.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 37820
Luka Perkov [Wed, 21 Aug 2013 00:36:53 +0000 (00:36 +0000)]
malta: refresh configuration
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37819
Luka Perkov [Wed, 21 Aug 2013 00:36:52 +0000 (00:36 +0000)]
include: introduce subtarget_platform CONFIG_TARGET
Sometimes it is useful to change platform's kernel config file but with loaded
subtarget's kernel config. Good example for this use case is malta.
Example:
$ make kernel_menuconfig CONFIG_TARGET=subtarget_platform
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37818
Luka Perkov [Wed, 21 Aug 2013 00:36:19 +0000 (00:36 +0000)]
crypto: add missing depends for crypto-manager
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37817
Felix Fietkau [Tue, 20 Aug 2013 18:25:20 +0000 (18:25 +0000)]
usbmode: update to latest version, includes fix from #14062
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37816
Luka Perkov [Mon, 19 Aug 2013 13:01:17 +0000 (13:01 +0000)]
uboot-env: fix spurious esac within ramips uci-defaults
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 37814
Luka Perkov [Mon, 19 Aug 2013 01:22:29 +0000 (01:22 +0000)]
upx: upgrade to 3.09
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37813
Luka Perkov [Mon, 19 Aug 2013 01:22:25 +0000 (01:22 +0000)]
mpc: upgrade to 1.0.1
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37812
Felix Fietkau [Sun, 18 Aug 2013 05:49:57 +0000 (05:49 +0000)]
kernel: add back missing declaration in the MIPS DMA patch that broke octeon
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37811
Luka Perkov [Sun, 18 Aug 2013 01:25:41 +0000 (01:25 +0000)]
kernel: drop dead pwm code
The files have last been used with 2.6.x kernel.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37810
Luka Perkov [Sun, 18 Aug 2013 01:25:40 +0000 (01:25 +0000)]
kernel: drop dead glamo code
The code is not used since the s3c24xx target was removed.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37809
Luka Perkov [Sat, 17 Aug 2013 23:54:41 +0000 (23:54 +0000)]
kernel: replace local m25p80 patches with upstream submission
http://lists.infradead.org/pipermail/linux-mtd/2013-August/048154.html
http://patchwork.ozlabs.org/patch/268019/
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37808
Luka Perkov [Sat, 17 Aug 2013 22:29:05 +0000 (22:29 +0000)]
kernel: drop 010-mtd_mp25p80_add_gd25q32_gd25q64.patch
The patch in question has been accepted upstream in commit:
55bf75b7dd8ec875d048824f3cdecf8254e292e5
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37807
Luka Perkov [Sat, 17 Aug 2013 18:39:35 +0000 (18:39 +0000)]
scons: upgrade to 2.3.0
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37806
Luka Perkov [Sat, 17 Aug 2013 17:09:41 +0000 (17:09 +0000)]
kernel: drop 110-fix_mtd_include.patch
Kernel builds just fine without this patch so we can just remove it.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37805
projects / openwrt / staging / ynezz.git / log