Adrian Hunter [Fri, 15 Nov 2019 12:42:24 +0000 (14:42 +0200)]
perf intel-pt: Add support for decoding AUX area samples
Add support for dumping, queuing and decoding AUX area samples. Decoding
samples is the same as regular decoding, except in the case where there
are no timestamps, in which case buffers are decoded immediately before
the sample event.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-15-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2019 12:42:23 +0000 (14:42 +0200)]
perf intel-pt: Add support for recording AUX area samples
Set up the default number of mmap pages, default sample size and default
psb_period for AUX area sampling. Add documentation also.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2019 12:42:22 +0000 (14:42 +0200)]
perf pmu: When using default config, record which bits of config were changed by the user
Default config for a PMU is defined before selected events are parsed.
That allows the user-entered config to override the default config.
However that does not allow for changing the default config based on
other options.
For example, if the user chooses AUX area sampling mode, in the case of
Intel PT, the psb_period needs to be small for sampling, so there is a
need to set the default psb_period to 0 (2 KiB) in that case. However
that should not override a value set by the user. To allow for that,
when using default config, record which bits of config were changed by
the user.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-13-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2019 12:42:21 +0000 (14:42 +0200)]
perf auxtrace: Add support for queuing AUX area samples
Add functions to queue AUX area samples in advance
(auxtrace_queue_data()) or individually (auxtrace_queues__add_sample())
or find out what queue a sample belongs on
(auxtrace_queues__sample_queue()).
auxtrace_queue_data() can also queue snapshot data which keeps snapshots
and samples ordered with respect to each other in case support for that
is desired.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2019 12:42:20 +0000 (14:42 +0200)]
perf session: Add facility to peek at all events
AUX area samples are not limited in how far back in time the sample
could start. Consequently samples must be queued in advance to allow for
time-ordered processing. To achieve that, add
perf_session__peek_events() that walks and peeks at all the events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2019 12:42:19 +0000 (14:42 +0200)]
perf auxtrace: Add support for dumping AUX area samples
Add support for dumping AUX area samples i.e. via the perf script/report
-D (--dump-raw-trace) option.
Committer notes:
Add __maybe_unused to the two args for auxtrace__dump_auxtrace_sample()
for when we don't HAVE_AUXTRACE_SUPPORT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2019 12:42:18 +0000 (14:42 +0200)]
perf inject: Cut AUX area samples
After decoding AUX area samples, the AUX area data is no longer needed
(having been replaced by synthesized events) so cut it out.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2019 12:42:17 +0000 (14:42 +0200)]
perf record: Add aux-sample-size config term
To allow individual events to be selected for AUX area sampling, add
aux-sample-size config term. attr.aux_sample_size is updated by
auxtrace_parse_sample_options() so that the existing validation will see
the value. Any event that has a non-zero aux_sample_size will cause AUX
area sampling to be configured, irrespective of the --aux-sample option.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2019 12:42:16 +0000 (14:42 +0200)]
perf record: Add support for AUX area sampling
Add a 'perf record' option '--aux-sample' to request AUX area sampling.
AUX area sampling uses an overwriting buffer much like snapshot mode, so
adjust the AUX buffer mmapping accordingly. To make it easy to queue
samples for decoding, synthesize an ID index.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2019 12:42:15 +0000 (14:42 +0200)]
perf auxtrace: Add support for AUX area sample recording
Add support for parsing and validating AUX area sample options. At
present, the only option is the sample size, but it is also necessary to
ensure that events are in a group with an AUX area event as the leader.
Committer note:
Add missing 'static inline' in front of auxtrace_parse_sample_options()
for when we don't HAVE_AUXTRACE_SUPPORT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2019 12:42:14 +0000 (14:42 +0200)]
perf auxtrace: Move perf_evsel__find_pmu()
Move perf_evsel__find_pmu() so it can be used without forward
declaration.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2019 12:42:13 +0000 (14:42 +0200)]
perf record: Add a function to test for kernel support for AUX area sampling
Architectures are expected to know if AUX area sampling is supported by
the hardware. Add a function perf_can_aux_sample() which will determine
whether the kernel supports it.
Committer notes:
I reported that this message was taking place on a kernel without the
required bits:
# perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
Error:
The sys_perf_event_open() syscall returned with 7 (Argument list too long) for event (branch-misses:u).
/bin/dmesg | grep -i perf may provide additional information.
Adrian sent a patch addressing it, with this explanation:
----
perf_can_aux_sample_size() always returned true because it did not pass
the attribute size to sys_perf_event_open, nor correctly check the
return value and errno.
----
After applying it I get, later in the series, when --aux-sample is
added:
# perf record --aux-sample -e '{intel_pt//u,branch-misses:u}'
AUX area sampling is not supported by kernel
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2019 12:42:11 +0000 (14:42 +0200)]
perf tools: Add kernel AUX area sampling definitions
Add kernel AUX area sampling definitions, which brings perf_event.h into
line with the kernel version.
New sample type PERF_SAMPLE_AUX requests a sample of the AUX area
buffer. New perf_event_attr member 'aux_sample_size' specifies the
desired size of the sample.
Also add support for parsing samples containing AUX area data i.e.
PERF_SAMPLE_AUX.
Committer notes:
I squashed the first two patches in this series to avoid breaking
automatic bisection, i.e. after applying only the original first patch
in this series we would have:
# perf test -v parsing
26: Sample parsing :
--- start ---
test child forked, pid 17018
sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating
test child finished with -1
---- end ----
Sample parsing: FAILED!
#
With the two paches combined:
# perf test parsing
26: Sample parsing : Ok
#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191115124225.5247-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Mon, 18 Nov 2019 14:08:49 +0000 (22:08 +0800)]
perf report: Jump to symbol source view from total cycles view
This patch supports jumping from tui total cycles view to symbol source
view.
For example,
perf record -b ./div
perf report --total-cycles
In total cycles view, we can select one entry and press 'a' or press
ENTER key to jump to symbol source view.
This patch also sets sort_order to NULL in cmd_report() which will use
the default branch sort order. The percent value in new annotate view
will be consistent with the percent in annotate view switched from perf
report (we observed the original percent gap with previous patches).
v2:
---
Fix the 'make NO_SLANG=1' error. (set __maybe_unused to
annotation_opts in block_hists_tui_browse()).
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191118140849.20714-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao [Mon, 18 Nov 2019 14:08:48 +0000 (22:08 +0800)]
perf util: Move block TUI function to ui browsers
It would be nice if we could jump to the assembler/source view (like the
normal perf report) from total cycles view.
This patch moves the block_hists_tui_browse from block-info.c to
ui/browsers/hists.c in order to reuse some browser codes (i.e
do_annotate) for implementing new annotation view.
v2:
---
Fix the 'make NO_SLANG=1' error. (Change 'int block_hists_tui_browse()'
to 'static inline int block_hists_tui_browse()')
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191118140849.20714-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexey Budankov [Mon, 18 Nov 2019 14:21:03 +0000 (17:21 +0300)]
perf session: Fix decompression of PERF_RECORD_COMPRESSED records
Avoid termination of trace loading in case the last record in the
decompressed buffer partly resides in the following mmaped
PERF_RECORD_COMPRESSED record.
In this case NULL value returned by fetch_mmaped_event() means to
proceed to the next mmaped record then decompress it and load compressed
events.
The issue can be reproduced like this:
$ perf record -z -- some_long_running_workload
$ perf report --stdio -vv
decomp (B): 44519 to 163000
decomp (B): 48119 to 174800
decomp (B): 65527 to 131072
fetch_mmaped_event: head=0x1ffe0 event->header_size=0x28, mmap_size=0x20000: fuzzed perf.data?
Error:
failed to process sample
...
Testing:
71: Zstd perf.data compression/decompression : Ok
$ tools/perf/perf report -vv --stdio
decomp (B): 59593 to 262160
decomp (B): 4438 to 16512
decomp (B): 285 to 880
Looking at the vmlinux_path (8 entries long)
Using vmlinux for symbols
decomp (B): 57474 to 261248
prefetch_event: head=0x3fc78 event->header_size=0x28, mmap_size=0x3fc80: fuzzed or compressed perf.data?
decomp (B): 25 to 32
decomp (B): 52 to 120
...
Fixes: 57fc032ad643 ("perf session: Avoid infinite loop when seeing invalid header.size")
Link: https://marc.info/?l=linux-kernel&m=156580812427554&w=2
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/cf782c34-f3f8-2f9f-d6ab-145cee0d5322@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 19 Nov 2019 21:44:22 +0000 (18:44 -0300)]
perf dso: Move dso_id from 'struct map' to 'struct dso'
And take it into account when looking up DSOs when we have the dso_id
fields obtained from somewhere, like from PERF_RECORD_MMAP2 records.
Instances of struct map pointing to the same DSO pathname but with
anything in dso_id different are in fact different DSOs, so better have
different 'struct dso' instances to reflect that. At some point we may
want to get copies of the contents of the different objects if we want
to do correct annotation or other analysis.
With this we get 'struct map' 24 bytes leaner:
$ pahole -C map ~/bin/perf
struct map {
union {
struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */
struct list_head node; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 24 */
u64 start; /* 24 8 */
u64 end; /* 32 8 */
_Bool erange_warned:1; /* 40: 0 1 */
_Bool priv:1; /* 40: 1 1 */
/* XXX 6 bits hole, try to pack */
/* XXX 3 bytes hole, try to pack */
u32 prot; /* 44 4 */
u64 pgoff; /* 48 8 */
u64 reloc; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u64 (*map_ip)(struct map *, u64); /* 64 8 */
u64 (*unmap_ip)(struct map *, u64); /* 72 8 */
struct dso * dso; /* 80 8 */
refcount_t refcnt; /* 88 4 */
u32 flags; /* 92 4 */
/* size: 96, cachelines: 2, members: 13 */
/* sum members: 92, holes: 1, sum holes: 3 */
/* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */
/* forced alignments: 1 */
/* last cacheline: 32 bytes */
} __attribute__((__aligned__(8)));
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-g4hxxmraplo7wfjmk384mfsb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 19 Nov 2019 20:51:34 +0000 (17:51 -0300)]
perf dsos: Remove unused dsos__find() method
Not used anywhere, nuke it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-teqz0eqcw43mnt7i3me44esw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 19 Nov 2019 19:30:56 +0000 (16:30 -0300)]
perf map: Move comparision of map's dso_id to a separate function
We'll use it when doing DSO lookups using dso_ids.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-u2nr1oq03o0i29w2ay9jx03s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 19 Nov 2019 15:40:29 +0000 (12:40 -0300)]
perf map: Pass a dso_id to map__new()
Instead of the 4 fields, a step in the direction of moving this to
struct dso.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-gp5s1xgxacurmih5d1l94ymy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 19 Nov 2019 15:26:19 +0000 (12:26 -0300)]
perf map: Move maj/min/ino/ino_generation to separate struct
And this patch highlights where these fields are being used: in the sort
order where it uses it to compare maps and classify samples taking into
account not just the DSO, but those DSO id fields.
I think these should be used to differentiate DSOs with the same name
but different 'struct dso_id' fields, i.e. these fields should move to
'struct dso' and then be used as part of the key when doing lookups for
DSOs, in addition to the DSO name.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8v5isitqy0dup47nnwkpc80f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Tue, 19 Nov 2019 11:59:03 +0000 (12:59 +0100)]
Merge tag 'perf-core-for-mingo-5.5-
20191119' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
x86/insn:
Adrian Hunter:
- Add some more Intel instructions to the opcode map:
cldemote, encls, enclu, enclv, enqcmd, enqcmds, movdir64b,
movdiri, pconfig, tpause, umonitor, umwait, wbnoinvd.
- The instruction decoding can be tested using the perf tools'
"x86 instruction decoder - new instructions" test as folllows:
$ perf test -v "new " 2>&1 | grep -i cldemote
Decoded ok: 0f 1c 00 cldemote (%eax)
Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8)
Decoded ok: 0f 1c 00 cldemote (%rax)
Decoded ok: 41 0f 1c 00 cldemote (%r8)
Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8)
Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8)
$ perf test -v "new " 2>&1 | grep -i tpause
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 41 0f ae f0 tpause %r8d
callchains:
Adrian Hunter:
- Fix segfault in thread__resolve_callchain_sample().
perf probe:
- Line fixes to show only lines where probes can be used with 'perf probe -L',
and when reporting them via 'perf probe -l'.
- Support multiprobe events.
perf scripts python:
Adrian Hunter:
- Fix use of TRUE with SQLite < 3.23 in exported-sql-viewer.py.
perf maps:
- Trim 'struct map' by removing the rb_node member for sorting
by map name, as that is only needed for processing kernel maps,
and only when classifying symbols by section at load time.
Sort them by name using qsort() and do lookups using bsearch()
when map_groups__find_by_name() is used.
perf parse:
Ian Rogers:
- Report initial event parsing error, providing a less cryptic message
to state that a PMU wasn't found in the system.
perf vendor events:
James Clark:
- Fix commas so that PMU event files for arm64, power8 and power nine
become valid JSON.
libtraceevent:
Konstantin Khlebnikov:
- Fix parsing of event %o and %X argument types.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ian Rogers [Sat, 16 Nov 2019 07:46:52 +0000 (23:46 -0800)]
perf parse: Report initial event parsing error
Record the first event parsing error and report. Implementing feedback
from Jiri Olsa:
https://lkml.org/lkml/2019/10/28/680
An example error is:
$ tools/perf/perf stat -e c/c/
WARNING: multiple event parsing errors
event syntax error: 'c/c/'
\___ unknown term
valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore
Initial error:
event syntax error: 'c/c/'
\___ Cannot find PMU `c'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20191116074652.9960-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Mon, 18 Nov 2019 08:12:49 +0000 (17:12 +0900)]
perf probe: Trace a magic number if variable is not found
Trace a magic number as immediate value if the target variable is not
found at some probe points which is based on one probe event.
This feature is good for the case if you trace a source code line with
some local variables, which is compiled into several instructions and
some of the variables are optimized out on some instructions.
Even if so, with this feature, perf probe trace a magic number instead
of such disappeared variables and fold those probes on one event.
E.g. without this patch:
# perf probe -D "pud_page_vaddr pud"
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
Failed to find 'pud' in this function.
p:probe/pud_page_vaddr _text+
23480787 pud=%ax:x64
p:probe/pud_page_vaddr _text+
23808453 pud=%bp:x64
p:probe/pud_page_vaddr _text+
23558082 pud=%ax:x64
p:probe/pud_page_vaddr _text+328373 pud=%r8:x64
p:probe/pud_page_vaddr _text+348448 pud=%bx:x64
p:probe/pud_page_vaddr _text+
23816818 pud=%bx:x64
With this patch:
# perf probe -D "pud_page_vaddr pud" | head
spurious_kernel_fault is blacklisted function, skip it.
vmalloc_fault is blacklisted function, skip it.
p:probe/pud_page_vaddr _text+
23480787 pud=%ax:x64
p:probe/pud_page_vaddr _text+149051 pud=\
deade12d:x64
p:probe/pud_page_vaddr _text+
23808453 pud=%bp:x64
p:probe/pud_page_vaddr _text+315926 pud=\
deade12d:x64
p:probe/pud_page_vaddr _text+
23807209 pud=\
deade12d:x64
p:probe/pud_page_vaddr _text+
23557365 pud=%ax:x64
p:probe/pud_page_vaddr _text+314097 pud=%di:x64
p:probe/pud_page_vaddr _text+314015 pud=\
deade12d:x64
p:probe/pud_page_vaddr _text+313893 pud=\
deade12d:x64
p:probe/pud_page_vaddr _text+324083 pud=\
deade12d:x64
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406476931.24476.6261475888681844285.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Mon, 18 Nov 2019 08:12:40 +0000 (17:12 +0900)]
perf probe: Support DW_AT_const_value constant value
Support DW_AT_const_value for variable assignment instead of location.
Note that this requires ftrace supporting immediate value.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406476012.24476.16096289871757175775.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Mon, 18 Nov 2019 08:12:30 +0000 (17:12 +0900)]
perf probe: Support multiprobe event
Support multiprobe event if the event is based on function and lines and
kernel supports it. In this case, perf probe creates the first probe
with an event, and tries to append following probes on that event, since
those probes must be on the same source code line.
Before this patch;
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18_1 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18_1 -aR sleep 1
#
After this patch (on multiprobe supported kernel)
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18 -aR sleep 1
#
Committer testing:
On a kernel that doesn't support multiprobe events, after this patch:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
# grep append /sys/kernel/debug/tracing/README
be modified by appending '.descending' or '.ascending' to a
can be modified by appending any of the following modifiers
#
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18_1 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18_1 -aR sleep 1
# perf probe -l
probe:vfs_read_L18 (on vfs_read:18@fs/read_write.c)
probe:vfs_read_L18_1 (on vfs_read:18@fs/read_write.c)
#
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406475010.24476.586290752591512351.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Mon, 18 Nov 2019 08:12:20 +0000 (17:12 +0900)]
perf probe: Generate event name with line number
Generate event name from function name with line number as
<function>_L<line_number>. Note that this is only for the new event
which is defined by the line number of function (except for line 0).
If there is another event on same line, you have to use
"-f" option. In that case, the new event has "_1" suffix.
e.g.
# perf probe -a kernel_read:2
Added new event:
probe:kernel_read_L2 (on kernel_read:2)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read_L2 -aR sleep 1
But if we omit the line number or 0th line, it will
have no suffix.
# perf probe -a kernel_read:0
Added new event:
probe:kernel_read (on kernel_read)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
probe:kernel_read (on kernel_read@linux-5.0.0/fs/read_write.c)
probe:kernel_read_L2 (on kernel_read:2@linux-5.0.0/fs/read_write.c)
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406474026.24476.2828897745502059569.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Mon, 18 Nov 2019 08:12:10 +0000 (17:12 +0900)]
perf probe: Do not show non representive lines by perf-probe -L
Since perf probe -L shows non representive lines, it can be mislead
users where user can put probes. This prevents to show such non
representive lines so that user can understand which lines user can
probe.
# perf probe -L kernel_read
<kernel_read@/build/linux-pvZVvI/linux-5.0.0/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
{
2 mm_segment_t old_fs;
ssize_t result;
old_fs = get_fs();
6 set_fs(get_ds());
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
Committer testing:
Before:
# perf probe -L kernel_read
<kernel_read@/usr/src/debug/kernel-5.3.fc30/linux-5.3.8-200.fc30.x86_64/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
1 {
2 mm_segment_t old_fs;
3 ssize_t result;
5 old_fs = get_fs();
6 set_fs(KERNEL_DS);
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
#
See the 1, 3, 5 lines? They shouldn't be there, after this patch:
# perf probe -L kernel_read
<kernel_read@/usr/src/debug/kernel-5.3.fc30/linux-5.3.8-200.fc30.x86_64/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
{
2 mm_segment_t old_fs;
ssize_t result;
old_fs = get_fs();
6 set_fs(KERNEL_DS);
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
#
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406473064.24476.2913278267727587314.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Mon, 18 Nov 2019 08:12:00 +0000 (17:12 +0900)]
perf probe: Verify given line is a representive line
Verify user given probe line is a representive line (which doesn't share
the address with other lines or the line is the least line among the
lines which shares same address), and if not, it shows what is the
representive line.
Without this fix, user can put a probe on the lines which is not a a
representive line. But since this is not a representive line, perf probe
-l shows a representive line number instead of user given line number.
e.g. (put kernel_read:3, but listed as kernel_read:2)
# perf probe -a kernel_read:3
Added new event:
probe:kernel_read (on kernel_read:3)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
# perf probe -l
probe:kernel_read (on kernel_read:2@linux-5.0.0/fs/read_write.c)
With this fix, perf probe doesn't allow user to put a probe on a
representive line, and tell what is the representive line.
# perf probe -a kernel_read:3
This line is sharing the addrees with other lines.
Please try to probe at kernel_read:2 instead.
Error: Failed to add events.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406472071.24476.14915451439785001021.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Mon, 18 Nov 2019 08:11:50 +0000 (17:11 +0900)]
perf probe: Show correct statement line number by perf probe -l
The dwarf_getsrc_die() can return the line which is not a statement nor
the least line number among the lines which shares same address.
This can lead perf probe --list shows incorrect line number for probed
address.
To fix this, this introduces cu_getsrc_die() which returns only a
statement line and which is the least line number (we call it the
representive line for an address), and use it in cu_find_lineinfo().
Also, if the given address is the entry address of a real function,
cu_find_lineinfo() returns the function declared line number instead of
the start line number of the function body.
For example, without this change perf probe -l shows incorrect line as
below.
# perf probe -a kernel_read:2
Added new event:
probe:kernel_read (on kernel_read:2)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
# perf probe -l
probe:kernel_read (on kernel_read:1@linux-5.0.0/fs/read_write.c)
With this fix, it shows correct line number as below;
# perf probe -l
probe:kernel_read (on kernel_read:2@linux-5.0.0/fs/read_write.c)
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406471067.24476.17463149618465494448.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2019 13:54:47 +0000 (15:54 +0200)]
x86/insn: Add some Intel instructions to the opcode map
Add to the opcode map the following instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).
The instruction decoding can be tested using the perf tools'
"x86 instruction decoder - new instructions" test as folllows:
$ perf test -v "new " 2>&1 | grep -i cldemote
Decoded ok: 0f 1c 00 cldemote (%eax)
Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8)
Decoded ok: 0f 1c 00 cldemote (%rax)
Decoded ok: 41 0f 1c 00 cldemote (%r8)
Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8)
Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8)
$ perf test -v "new " 2>&1 | grep -i tpause
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 41 0f ae f0 tpause %r8d
$ perf test -v "new " 2>&1 | grep -i umonitor
Decoded ok: 67 f3 0f ae f0 umonitor %ax
Decoded ok: f3 0f ae f0 umonitor %eax
Decoded ok: 67 f3 0f ae f0 umonitor %eax
Decoded ok: f3 0f ae f0 umonitor %rax
Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d
$ perf test -v "new " 2>&1 | grep -i umwait
Decoded ok: f2 0f ae f0 umwait %eax
Decoded ok: f2 0f ae f0 umwait %eax
Decoded ok: f2 41 0f ae f0 umwait %r8d
$ perf test -v "new " 2>&1 | grep -i movdiri
Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx)
Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax)
Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx)
Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax)
$ perf test -v "new " 2>&1 | grep -i movdir64b
Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx
Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx
Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx
Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx
Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx
Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx
Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx
Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i enqcmd
Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx
Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx
Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx
Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx
Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx
Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx
Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx
Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx
Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx
Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx
Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx
Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i enqcmds
Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx
Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx
Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx
Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i encls
Decoded ok: 0f 01 cf encls
Decoded ok: 0f 01 cf encls
$ perf test -v "new " 2>&1 | grep -i enclu
Decoded ok: 0f 01 d7 enclu
Decoded ok: 0f 01 d7 enclu
$ perf test -v "new " 2>&1 | grep -i enclv
Decoded ok: 0f 01 c0 enclv
Decoded ok: 0f 01 c0 enclv
$ perf test -v "new " 2>&1 | grep -i pconfig
Decoded ok: 0f 01 c5 pconfig
Decoded ok: 0f 01 c5 pconfig
$ perf test -v "new " 2>&1 | grep -i wbnoinvd
Decoded ok: f3 0f 09 wbnoinvd
Decoded ok: f3 0f 09 wbnoinvd
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191115135447.6519-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2019 13:54:46 +0000 (15:54 +0200)]
x86/insn: perf tools: Add some instructions to the new instructions test
Add to the "x86 instruction decoder - new instructions" test the following
instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191115135447.6519-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 18 Nov 2019 19:51:00 +0000 (16:51 -0300)]
perf map: Move seldom used ->flags field to second cacheline
So we start with:
$ pahole -C map ~/bin/perf
struct map {
union {
struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */
struct list_head node; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 24 */
u64 start; /* 24 8 */
u64 end; /* 32 8 */
_Bool erange_warned:1; /* 40: 0 1 */
_Bool priv:1; /* 40: 1 1 */
/* XXX 6 bits hole, try to pack */
/* XXX 3 bytes hole, try to pack */
u32 prot; /* 44 4 */
u32 flags; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
u64 pgoff; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u64 reloc; /* 64 8 */
u32 maj; /* 72 4 */
u32 min; /* 76 4 */
u64 ino; /* 80 8 */
u64 ino_generation; /* 88 8 */
u64 (*map_ip)(struct map *, u64); /* 96 8 */
u64 (*unmap_ip)(struct map *, u64); /* 104 8 */
struct dso * dso; /* 112 8 */
refcount_t refcnt; /* 120 4 */
/* size: 128, cachelines: 2, members: 17 */
/* sum members: 116, holes: 2, sum holes: 7 */
/* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */
/* padding: 4 */
/* forced alignments: 1 */
} __attribute__((__aligned__(8)));
$
and 'flags' is seldom used when printing details about the map or with
the "cacheline" sort order, we can move them it to the second cacheline,
that will allow combining it with 'refcnt', that is only four bytes:
$ pahole -C map ~/bin/perf
struct map {
union {
struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */
struct list_head node; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 24 */
u64 start; /* 24 8 */
u64 end; /* 32 8 */
_Bool erange_warned:1; /* 40: 0 1 */
_Bool priv:1; /* 40: 1 1 */
/* XXX 6 bits hole, try to pack */
/* XXX 3 bytes hole, try to pack */
u32 prot; /* 44 4 */
u64 pgoff; /* 48 8 */
u64 reloc; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u32 maj; /* 64 4 */
u32 min; /* 68 4 */
u64 ino; /* 72 8 */
u64 ino_generation; /* 80 8 */
u64 (*map_ip)(struct map *, u64); /* 88 8 */
u64 (*unmap_ip)(struct map *, u64); /* 96 8 */
struct dso * dso; /* 104 8 */
refcount_t refcnt; /* 112 4 */
u32 flags; /* 116 4 */
/* size: 120, cachelines: 2, members: 17 */
/* sum members: 116, holes: 1, sum holes: 3 */
/* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */
/* forced alignments: 1 */
/* last cacheline: 56 bytes */
} __attribute__((__aligned__(8)));
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-2cdw3zlw1mkamaf7nqtdlxfi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 18 Nov 2019 19:26:29 +0000 (16:26 -0300)]
perf map: Use bitmap for booleans
The map->priv and map->erange_warned are seldom used, the first only in
tests/vmlinux-kallsyms.c, the later only when hist_entry__inc_addr_samples()
returns -ERANGE in 'perf top', which are really rare occasions, so make
them a bool bitfield.
This will open up space for other members on the first cacheline.
$ pahole -C map ~/bin/perf
struct map {
union {
struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */
struct list_head node; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 24 */
u64 start; /* 24 8 */
u64 end; /* 32 8 */
_Bool erange_warned:1; /* 40: 0 1 */
_Bool priv:1; /* 40: 1 1 */
/* XXX 6 bits hole, try to pack */
/* XXX 3 bytes hole, try to pack */
u32 prot; /* 44 4 */
u32 flags; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
u64 pgoff; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u64 reloc; /* 64 8 */
u32 maj; /* 72 4 */
u32 min; /* 76 4 */
u64 ino; /* 80 8 */
u64 ino_generation; /* 88 8 */
u64 (*map_ip)(struct map *, u64); /* 96 8 */
u64 (*unmap_ip)(struct map *, u64); /* 104 8 */
struct dso * dso; /* 112 8 */
refcount_t refcnt; /* 120 4 */
/* size: 128, cachelines: 2, members: 17 */
/* sum members: 116, holes: 2, sum holes: 7 */
/* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */
/* padding: 4 */
/* forced alignments: 1 */
} __attribute__((__aligned__(8)));
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-g5545pcq4ff0wr17tfb1piqt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Konstantin Khlebnikov [Sun, 10 Nov 2019 10:11:01 +0000 (13:11 +0300)]
libtraceevent: Fix parsing of event %o and %X argument types
Add missing "%o" and "%X". Ext4 events use "%o" for printing i_mode.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Link: http://lore.kernel.org/lkml/157338066113.6548.11461421296091086041.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 14 Nov 2019 14:25:38 +0000 (16:25 +0200)]
perf callchain: Fix segfault in thread__resolve_callchain_sample()
Do not dereference 'chain' when it is NULL.
$ perf record -e intel_pt//u -e branch-misses:u uname
$ perf report --itrace=l --branch-history
perf: Segmentation fault
Fixes: e9024d519d89 ("perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc}")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20191114142538.4097-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sun, 17 Nov 2019 14:38:13 +0000 (11:38 -0300)]
perf map_groups: Auto sort maps by name, if needed
There are still lots of lookups by name, even if just when loading
vmlinux, till that code is studied to figure out if its possible to do
away with those map lookup by names, provide a way to sort it using
libc's qsort/bsearch.
Doing it at the first lookup defers the sorting a bit, and as the code
stands now, is never done for user maps, just for the kernel ones.
# perf probe -l
# perf probe -x ~/bin/perf -L __map_groups__find_by_name
<__map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0>
0 static struct map *__map_groups__find_by_name(struct map_groups *mg, const char *name)
1 {
struct map **mapp;
4 if (mg->maps_by_name == NULL &&
5 map__groups__sort_by_name_from_rbtree(mg))
6 return NULL;
8 mapp = bsearch(name, mg->maps_by_name, mg->nr_maps, sizeof(*mapp), map__strcmp_name);
9 if (mapp)
10 return *mapp;
11 return NULL;
12 }
struct map *map_groups__find_by_name(struct map_groups *mg, const char *name)
{
# perf probe -x ~/bin/perf 'found=__map_groups__find_by_name:10 name:string'
Added new event:
probe_perf:found (on __map_groups__find_by_name:10 in /home/acme/bin/perf with name:string)
You can now use it in all perf tools, such as:
perf record -e probe_perf:found -aR sleep 1
#
# perf probe -x ~/bin/perf -L map_groups__find_by_name
<map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0>
0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name)
1 {
2 struct maps *maps = &mg->maps;
struct map *map;
5 down_read(&maps->lock);
7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) {
8 map = mg->last_search_by_name;
9 goto out_unlock;
}
/*
* If we have mg->maps_by_name, then the name isn't in the rbtree,
* as mg->maps_by_name mirrors the rbtree when lookups by name are
* made.
*/
16 map = __map_groups__find_by_name(mg, name);
17 if (map || mg->maps_by_name != NULL)
18 goto out_unlock;
/* Fallback to traversing the rbtree... */
21 maps__for_each_entry(maps, map)
22 if (strcmp(map->dso->short_name, name) == 0) {
23 mg->last_search_by_name = map;
24 goto out_unlock;
}
27 map = NULL;
out_unlock:
30 up_read(&maps->lock);
31 return map;
32 }
int dso__load_vmlinux(struct dso *dso, struct map *map,
const char *vmlinux, bool vmlinux_allocated)
# perf probe -x ~/bin/perf 'fallback=map_groups__find_by_name:21 name:string'
Added new events:
probe_perf:fallback (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string)
probe_perf:fallback_1 (on map_groups__find_by_name:21 in /home/acme/bin/perf with name:string)
You can now use it in all perf tools, such as:
perf record -e probe_perf:fallback_1 -aR sleep 1
#
# perf probe -l
probe_perf:fallback (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string)
probe_perf:fallback_1 (on map_groups__find_by_name:21@util/symbol.c in /home/acme/bin/perf with name_string)
probe_perf:found (on __map_groups__find_by_name:10@util/symbol.c in /home/acme/bin/perf with name_string)
#
# perf stat -e probe_perf:*
Now run 'perf top' in another term and then, after a while, stop 'perf stat':
Furthermore, if we ask for interval printing, we can see that that is done just
at the start of the workload:
# perf stat -I1000 -e probe_perf:*
# time counts unit events
1.
000319513 0 probe_perf:found
1.
000319513 0 probe_perf:fallback_1
1.
000319513 0 probe_perf:fallback
2.
001868092 23,251 probe_perf:found
2.
001868092 0 probe_perf:fallback_1
2.
001868092 0 probe_perf:fallback
3.
002901597 0 probe_perf:found
3.
002901597 0 probe_perf:fallback_1
3.
002901597 0 probe_perf:fallback
4.
003358591 0 probe_perf:found
4.
003358591 0 probe_perf:fallback_1
4.
003358591 0 probe_perf:fallback
^C
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-c5lmbyr14x448rcfii7y6t3k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 14 Nov 2019 15:28:41 +0000 (12:28 -0300)]
perf machine: No need to check if kernel module maps pre-exist
We'only populating maps for kernel modules either from perf.data file
PERF_RECORD_MMAP records or when parsing /proc/modules, so there is no
need to first look if we already have those module maps in the list,
that would mean the kernel has duplicate entries.
So ditch one use of looking up maps by name.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-gnzjg2hhuz6jnrw91m35059y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 14 Nov 2019 15:15:34 +0000 (12:15 -0300)]
perf record: No need to process the synthesized MMAP events twice
At the end of a 'perf record' session, by default, we'll process all
samples and populate the threads, maps, etc so as to find out which of
the DSOs got samples, to reduce the size of the build-id table we'll
add to the perf.data headers.
But we don't need to process the PERF_RECORD_MMAP events synthesized
for the kernel modules, as we have those already via
perf_session__create_kernel_maps(), so add mmap/mmap2 handlers that
first look at event->header.misc to see if the event is for a user map,
bailing out if not.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mofoxvcx2dryppcw3o689jdd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 14 Nov 2019 13:46:45 +0000 (10:46 -0300)]
perf map: No need to adjust the long name of modules
At some point in the past we needed to make sure we would get the long
name of modules and not just what we get from /proc/modules, but that
need, as described in the cset that introduced the adjustment function:
Fixes: c03d5184f0e9 ("perf machine: Adjust dso->long_name for offline module")
Without using the buildid-cache:
# lsmod | grep trusted
# insmod trusted.ko
# lsmod | grep trusted
trusted 24576 0
# strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/.debug/root/trusted.ko/
dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
probe:key_seal (on key_seal in trusted)
# perf probe -l
probe:key_seal (on key_seal in trusted)
#
No attempt at opening '[trusted]'.
Now using the build-id cache:
# rmmod trusted
# perf buildid-cache --add ./trusted.ko
# insmod trusted.ko
# strace -e open,openat perf probe -m ./trusted.ko key_seal |& grep trusted
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/sys/module/trusted/notes/.note.gnu.build-id", O_RDONLY) = 7
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/.debug/root/trusted.ko/
dd3d355d567394d540f527e093e0f64b95879584/probes", O_RDWR|O_CREAT, 0644) = 3
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/root/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/.debug/trusted.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, ".debug/trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "trusted.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 4
openat(AT_FDCWD, "/root/trusted.ko", O_RDONLY) = 3
#
Again, no attempt at reading '[trusted]'.
Finally, adding a probe to that function and then using:
[root@quaco ~]# perf trace -e probe_perf:*/max-stack=16/ --max-events=2
0.000 perf/13456 probe_perf:dso__adjust_kmod_long_name(__probe_ip:
5492263)
dso__adjust_kmod_long_name (/home/acme/bin/perf)
machine__process_kernel_mmap_event (/home/acme/bin/perf)
machine__process_mmap_event (/home/acme/bin/perf)
perf_event__process_mmap (/home/acme/bin/perf)
machines__deliver_event (/home/acme/bin/perf)
perf_session__deliver_event (/home/acme/bin/perf)
perf_session__process_event (/home/acme/bin/perf)
process_simple (/home/acme/bin/perf)
reader__process_events (/home/acme/bin/perf)
__perf_session__process_events (/home/acme/bin/perf)
perf_session__process_events (/home/acme/bin/perf)
process_buildids (/home/acme/bin/perf)
record__finish_output (/home/acme/bin/perf)
__cmd_record (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
0.055 perf/13456 probe_perf:dso__adjust_kmod_long_name(__probe_ip:
5492263)
dso__adjust_kmod_long_name (/home/acme/bin/perf)
machine__process_kernel_mmap_event (/home/acme/bin/perf)
machine__process_mmap_event (/home/acme/bin/perf)
perf_event__process_mmap (/home/acme/bin/perf)
machines__deliver_event (/home/acme/bin/perf)
perf_session__deliver_event (/home/acme/bin/perf)
perf_session__process_event (/home/acme/bin/perf)
process_simple (/home/acme/bin/perf)
reader__process_events (/home/acme/bin/perf)
__perf_session__process_events (/home/acme/bin/perf)
perf_session__process_events (/home/acme/bin/perf)
process_buildids (/home/acme/bin/perf)
record__finish_output (/home/acme/bin/perf)
__cmd_record (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
#
This was the only path I could find using the perf tools that reach at this
function, then as of november/2019, if we put a probe in the line where the
actuall setting of the dso->long_name is done:
# perf trace -e probe_perf:*
^C[root@quaco ~]
# perf stat -e probe_perf:* -I 2000
2.
000404265 0 probe_perf:dso__adjust_kmod_long_name
4.
001142200 0 probe_perf:dso__adjust_kmod_long_name
6.
001704120 0 probe_perf:dso__adjust_kmod_long_name
8.
002398316 0 probe_perf:dso__adjust_kmod_long_name
10.
002984010 0 probe_perf:dso__adjust_kmod_long_name
12.
003597851 0 probe_perf:dso__adjust_kmod_long_name
14.
004113303 0 probe_perf:dso__adjust_kmod_long_name
16.
004582773 0 probe_perf:dso__adjust_kmod_long_name
18.
005176373 0 probe_perf:dso__adjust_kmod_long_name
20.
005801605 0 probe_perf:dso__adjust_kmod_long_name
22.
006467540 0 probe_perf:dso__adjust_kmod_long_name
^C 23.
683261941 0 probe_perf:dso__adjust_kmod_long_name
#
Its not being used at all.
To further test this I used kvm.ko as the offline module, i.e. removed
if from the buildid-cache by nuking it completely (rm -rf ~/.debug) and
moved it from the normal kernel distro path, removed the modules, stoped
the kvm guest, and then installed it manually, etc.
# rmmod kvm-intel
# rmmod kvm
# lsmod | grep kvm
# modprobe kvm-intel
modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x55d3b1722260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
modprobe: ERROR: could not insert 'kvm_intel': Unknown symbol in module, or unknown parameter (see dmesg)
# insmod ./kvm.ko
# modprobe kvm-intel
modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
modprobe: ERROR: ctx=0x562f34026260 path=/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm/kvm.ko.xz error=No such file or directory
# lsmod | grep kvm
kvm_intel 299008 0
kvm 765952 1 kvm_intel
irqbypass 16384 1 kvm
#
# perf probe -x ~/bin/perf machine__findnew_module_map:12 mname=m.name:string filename=filename:string 'dso_long_name=map->dso->long_name:string' 'dso_name=map->dso->name:string'
# perf probe -l
probe_perf:machine__findnew_module_map (on machine__findnew_module_map:12@util/machine.c in /home/acme/bin/perf with mname filename dso_long_name dso_name)
# perf record
^C[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 3.416 MB perf.data (33956 samples) ]
# perf trace -e probe_perf:machine*
<SNIP>
6.322 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip:
5492493, mname: "[salsa20_generic]", filename: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_long_name: "/lib/modules/5.3.8-200.fc30.x86_64/kernel/crypto/salsa20_generic.ko.xz", dso_name: "[salsa20_generic]")
6.375 perf/23099 probe_perf:machine__findnew_module_map(__probe_ip:
5492493, mname: "[kvm]", filename: "[kvm]", dso_long_name: "[kvm]", dso_name: "[kvm]")
<SNIP>
The filename doesn't come with the path, no point in trying to set the dso->long_name.
[root@quaco ~]# strace -e open,openat perf probe -m ./kvm.ko kvm_apic_local_deliver |& egrep 'open.*kvm'
openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/sys/module/kvm/notes/.note.gnu.build-id", O_RDONLY) = 4
openat(AT_FDCWD, "/lib/modules/5.3.8-200.fc30.x86_64/kernel/arch/x86/kvm", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 7
openat(AT_FDCWD, "/sys/module/kvm_intel/notes/.note.gnu.build-id", O_RDONLY) = 8
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/.debug/root/kvm.ko/
5955f426cb93f03f30f3e876814be2db80ab0b55/probes", O_RDWR|O_CREAT, 0644) = 3
openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/usr/lib/debug/root/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/.debug/kvm.ko", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, ".debug/kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "kvm.ko.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 4
openat(AT_FDCWD, "/root/kvm.ko", O_RDONLY) = 3
[root@quaco ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-jlfew3lyb24d58egrp0o72o2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 13 Nov 2019 19:33:33 +0000 (16:33 -0300)]
perf map_groups: Add a front end cache for map lookups by name
Lets see if it helps:
First look at the probeable lines for the function that does lookups by
name in a map_groups struct:
# perf probe -x ~/bin/perf -L map_groups__find_by_name
<map_groups__find_by_name@/home/acme/git/perf/tools/perf/util/symbol.c:0>
0 struct map *map_groups__find_by_name(struct map_groups *mg, const char *name)
1 {
2 struct maps *maps = &mg->maps;
struct map *map;
5 down_read(&maps->lock);
7 if (mg->last_search_by_name && strcmp(mg->last_search_by_name->dso->short_name, name) == 0) {
8 map = mg->last_search_by_name;
9 goto out_unlock;
}
12 maps__for_each_entry(maps, map)
13 if (strcmp(map->dso->short_name, name) == 0) {
14 mg->last_search_by_name = map;
15 goto out_unlock;
}
18 map = NULL;
out_unlock:
21 up_read(&maps->lock);
22 return map;
23 }
int dso__load_vmlinux(struct dso *dso, struct map *map,
const char *vmlinux, bool vmlinux_allocated)
#
Now add a probe to the place where we reuse the last search:
# perf probe -x ~/bin/perf map_groups__find_by_name:8
Added new event:
probe_perf:map_groups__find_by_name (on map_groups__find_by_name:8 in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:map_groups__find_by_name -aR sleep 1
#
Now lets do a system wide 'perf stat' counting those events:
# perf stat -e probe_perf:*
Leave it running and lets do a 'perf top', then, after a while, stop the
'perf stat':
# perf stat -e probe_perf:*
^C
Performance counter stats for 'system wide':
3,603 probe_perf:map_groups__find_by_name
44.
565253139 seconds time elapsed
#
yeah, good to have.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-tcz37g3nxv3tvxw3q90vga3p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 13 Nov 2019 19:16:25 +0000 (16:16 -0300)]
perf maps: Do not use an rbtree to sort by map name
This is only used for the kernel maps, shave 24 bytes out 'struct map'
and just traverse the existing per ip rbtree to look for maps by name,
use a front end cache to reuse the last search if its the same name.
After this 'struct map' is down to just two cachelines:
$ pahole -C map ~/bin/perf
struct map {
union {
struct rb_node rb_node __attribute__((__aligned__(8))); /* 0 24 */
struct list_head node; /* 0 16 */
} __attribute__((__aligned__(8))); /* 0 24 */
u64 start; /* 24 8 */
u64 end; /* 32 8 */
_Bool erange_warned; /* 40 1 */
/* XXX 3 bytes hole, try to pack */
u32 priv; /* 44 4 */
u32 prot; /* 48 4 */
u32 flags; /* 52 4 */
u64 pgoff; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u64 reloc; /* 64 8 */
u32 maj; /* 72 4 */
u32 min; /* 76 4 */
u64 ino; /* 80 8 */
u64 ino_generation; /* 88 8 */
u64 (*map_ip)(struct map *, u64); /* 96 8 */
u64 (*unmap_ip)(struct map *, u64); /* 104 8 */
struct dso * dso; /* 112 8 */
refcount_t refcnt; /* 120 4 */
/* size: 128, cachelines: 2, members: 17 */
/* sum members: 121, holes: 1, sum holes: 3 */
/* padding: 4 */
/* forced alignments: 1 */
} __attribute__((__aligned__(8)));
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-bvr8fqfgzxtgnhnwt5sssx5g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Fri, 15 Nov 2019 07:33:54 +0000 (08:33 +0100)]
Merge tag 'perf-core-for-mingo-5.5-
20191112' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf record:
Ravi Bangoria:
- Provide an option to print perf_event_open args and syscall return value.
This was already possible using -v, but then lots of other debug info
would be output as well, provide a way to show just the syscall args
and return value, e.g.:
# perf --debug perf-event-open=1 record
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID
disabled 1
inherit 1
<SNIP>
ksymbol 1
bpf_event 1
------------------------------------------------------------
sys_perf_event_open: pid 4308 cpu 0 group_fd -1 flags 0x8 = 4
core:
- Remove map->groups, we can get that information in other ways, reduces
the size of a key data structure and paves the way to have it shared
by multiple threads.
- Use 'struct map_symbol' in more places, where we already were using a
'struct map' + 'struct symbol', this helps passing that usual pair of
information across callchain, browser code, etc.
- Add 'struct map_groups' (where the map_symbol->map is) to 'struct map_symbol',
to ease annotation code, for instance, where we call from functions in one map
we're browsing to functions in another DSO, mapped in another 'struct map'.
event parsing:
Ian Rogers:
- Use YYABORT to clear stack after failure, plugging leaks
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnaldo Carvalho de Melo [Wed, 13 Nov 2019 19:06:28 +0000 (16:06 -0300)]
perf maps: Purge the entries from maps->names in __maps__purge()
No need to iterate via the ->names rbtree, as all the entries there
as in maps->entries as well, reuse __maps__purge() for that.
Doing it this way we can kill maps__for_each_entry_by_name(),
maps__for_each_entry_by_name_safe(), maps__{first,next}_by_name().
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ps0nrio8pydyo23rr2s696ue@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 13 Nov 2019 12:02:06 +0000 (14:02 +0200)]
perf scripts python: exported-sql-viewer.py: Fix use of TRUE with SQLite
Prior to version 3.23 SQLite does not support TRUE or FALSE, so always
use 1 and 0 for SQLite.
Fixes: 26c11206f433 ("perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.3+
Link: http://lore.kernel.org/lkml/20191113120206.26957-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Alexander Shishkin [Tue, 5 Nov 2019 08:27:01 +0000 (10:27 +0200)]
perf/x86/intel/pt: Prevent redundant WRMSRs
With recent optimizations to AUX and PT buffer management code (high order
AUX allocations, opportunistic Single Range Output), it is far more likely
now that the output MSRs won't need reprogramming on every sched-in.
To avoid needless WRMSRs of those registers, cache their values and only
write them when needed.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191105082701.78442-3-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexander Shishkin [Tue, 5 Nov 2019 08:27:00 +0000 (10:27 +0200)]
perf/x86/intel/pt: Opportunistically use single range output mode
Most of PT implementations support Single Range Output mode, which is
an alternative to ToPA that can be used for a single contiguous buffer
and if we don't require an interrupt, that is, in AUX snapshot mode.
Now that perf core will use high order allocations for the AUX buffer,
in many cases the first condition will also be satisfied.
The two most obvious benefits of the Single Range Output mode over the
ToPA are:
* not having to allocate the ToPA table(s),
* not using the ToPA walk hardware.
Make use of this functionality where available and appropriate.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191105082701.78442-2-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexander Shishkin [Fri, 25 Oct 2019 14:08:35 +0000 (17:08 +0300)]
perf/x86/intel/pt: Add sampling support
Add AUX sampling support to the PT PMU: implement an NMI-safe callback
that takes a snapshot of the buffer without touching the event states.
This is done for PT events that don't use PMIs, that is, snapshot mode
(RO mapping of the AUX area).
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: adrian.hunter@intel.com
Cc: mathieu.poirier@linaro.org
Link: https://lkml.kernel.org/r/20191025140835.53665-4-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexander Shishkin [Fri, 25 Oct 2019 14:08:34 +0000 (17:08 +0300)]
perf/x86/intel/pt: Factor out pt_config_start()
PT trace is now enabled at the bottom of the event configuration
function that takes care of all configuration bits related to a given
event, including the address filter update. This is only needed where
the event configuration changes, that is, in ->add()/->start().
In the interrupt path we can use a lighter version that keeps the
configuration intact, since it hasn't changed, and only flips the
enable bit.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: adrian.hunter@intel.com
Cc: mathieu.poirier@linaro.org
Link: https://lkml.kernel.org/r/20191025140835.53665-3-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexander Shishkin [Fri, 25 Oct 2019 14:08:33 +0000 (17:08 +0300)]
perf/aux: Allow using AUX data in perf samples
AUX data can be used to annotate perf events such as performance counters
or tracepoints/breakpoints by including it in sample records when
PERF_SAMPLE_AUX flag is set. Such samples would be instrumental in debugging
and profiling by providing, for example, a history of instruction flow
leading up to the event's overflow.
The implementation makes use of grouping an AUX event with all the events
that wish to take samples of the AUX data, such that the former is the
group leader. The samplees should also specify the desired size of the AUX
sample via attr.aux_sample_size.
AUX capable PMUs need to explicitly add support for sampling, because it
relies on a new callback to take a snapshot of the buffer without touching
the event states.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: adrian.hunter@intel.com
Cc: mathieu.poirier@linaro.org
Link: https://lkml.kernel.org/r/20191025140835.53665-2-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Qian Cai [Wed, 6 Nov 2019 05:29:35 +0000 (00:29 -0500)]
perf/core: Fix unlock balance in perf_init_event()
Commit:
66d258c5b048 ("perf/core: Optimize perf_init_event()")
introduced an unlock imbalance in perf_init_event() where it calls
"goto again" and then only repeat rcu_read_unlock().
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 66d258c5b048 ("perf/core: Optimize perf_init_event()")
Link: https://lkml.kernel.org/r/20191106052935.8352-1-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Wed, 13 Nov 2019 10:04:43 +0000 (11:04 +0100)]
Merge branch 'perf/urgent' into perf/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ben Dooks (Codethink) [Wed, 6 Nov 2019 13:25:27 +0000 (13:25 +0000)]
perf/core: Fix missing static inline on perf_cgroup_switch()
It looks like a "static inline" has been missed in front
of the empty definition of perf_cgroup_switch() under
certain configurations.
Fixes the following sparse warning:
kernel/events/core.c:1035:1: warning: symbol 'perf_cgroup_switch' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191106132527.19977-1-ben.dooks@codethink.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexander Shishkin [Tue, 5 Nov 2019 07:57:02 +0000 (09:57 +0200)]
perf/core: Consistently fail fork on allocation failures
Commit:
313ccb9615948 ("perf: Allocate context task_ctx_data for child event")
makes the inherit path skip over the current event in case of task_ctx_data
allocation failure. This, however, is inconsistent with allocation failures
in perf_event_alloc(), which would abort the fork.
Correct this by returning an error code on task_ctx_data allocation
failure and failing the fork in that case.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191105075702.60319-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexander Shishkin [Wed, 30 Oct 2019 13:47:31 +0000 (15:47 +0200)]
perf/aux: Disallow aux_output for kernel events
Commit
ab43762ef0109 ("perf: Allow normal events to output AUX data")
added 'aux_output' bit to the attribute structure, which relies on AUX
events and grouping, neither of which is supported for the kernel events.
This notwithstanding, attempts have been made to use it in the kernel
code, suggesting the necessity of an explicit hard -EINVAL.
Fix this by rejecting attributes with aux_output set for kernel events.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191030134731.5437-3-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexander Shishkin [Wed, 30 Oct 2019 13:47:30 +0000 (15:47 +0200)]
perf/core: Reattach a misplaced comment
A comment is in a wrong place in perf_event_create_kernel_counter().
Fix that.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lkml.kernel.org/r/20191030134731.5437-2-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexander Shishkin [Fri, 1 Nov 2019 15:12:48 +0000 (17:12 +0200)]
perf/aux: Fix the aux_output group inheritance fix
Commit
f733c6b508bc ("perf/core: Fix inheritance of aux_output groups")
adds a NULL pointer dereference in case inherit_group() races with
perf_release(), which causes the below crash:
> BUG: kernel NULL pointer dereference, address:
000000000000010b
> #PF: supervisor read access in kernel mode
> #PF: error_code(0x0000) - not-present page
> PGD
3b203b067 P4D
3b203b067 PUD
3b2040067 PMD 0
> Oops: 0000 [#1] SMP KASAN
> CPU: 0 PID: 315 Comm: exclusive-group Tainted: G B
5.4.0-rc3-00181-g72e1839403cb-dirty #878
> RIP: 0010:perf_get_aux_event+0x86/0x270
> Call Trace:
> ? __perf_read_group_add+0x3b0/0x3b0
> ? __kasan_check_write+0x14/0x20
> ? __perf_event_init_context+0x154/0x170
> inherit_task_group.isra.0.part.0+0x14b/0x170
> perf_event_init_task+0x296/0x4b0
Fix this by skipping over events that are getting closed, in the
inheritance path.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: f733c6b508bc ("perf/core: Fix inheritance of aux_output groups")
Link: https://lkml.kernel.org/r/20191101151248.47327-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 6 Nov 2019 11:51:04 +0000 (12:51 +0100)]
perf/core: Disallow uncore-cgroup events
While discussing uncore event scheduling, I noticed we do not in fact
seem to dis-allow making uncore-cgroup events. Such events make no
sense what so ever because the cgroup is a CPU local state where
uncore counts across a number of CPUs.
Disallow them.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
James Clark [Tue, 12 Nov 2019 16:03:41 +0000 (16:03 +0000)]
perf vendor events power9: Fix commas so PMU event files are valid JSON
No functional change.
Remove extra commas in the power9 JSON files so that the files
can be parsed and validated by other utilities such as Python
that fail to parse invalid JSON.
Before:
$ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done
tools/perf/pmu-events/arch/powerpc/power9/cache.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x300
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/floating-point.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x141
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/frontend.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x250
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/marked.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x301
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/memory.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x300
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/other.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x308
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/pipeline.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x4D0
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/pmc.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x200
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power9/translation.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x1E"
(right here) ------^
JSON is invalid
$
After:
$ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done
tools/perf/pmu-events/arch/powerpc/power9/cache.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/floating-point.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/frontend.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/marked.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/memory.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/other.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/pipeline.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/pmc.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power9/translation.json
JSON is valid
$
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kevin Mooney <kevin.mooney@arm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: nd@arm.com
Link: http://lore.kernel.org/lkml/20191112160342.26470-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Tue, 12 Nov 2019 16:03:40 +0000 (16:03 +0000)]
perf vendor events power8: Fix commas so PMU event files are valid JSON
No functional change.
Remove extra commas in the power8 JSON files so that the files
can be parsed and validated by other utilities such as Python
that fail to parse invalid JSON.
Committer testing:
Before:
$ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done
tools/perf/pmu-events/arch/powerpc/power8/cache.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x4c0
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/floating-point.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x200
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/frontend.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x250
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/marked.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x351
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/memory.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x100
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/other.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x1f0
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/pipeline.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x100
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/pmc.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x200
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/powerpc/power8/translation.json
parse error: invalid object key (must be a string)
[ {, "EventCode": "0x4c0
(right here) ------^
JSON is invalid
$
After:
$ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done
tools/perf/pmu-events/arch/powerpc/power8/cache.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/floating-point.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/frontend.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/marked.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/memory.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/other.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/pipeline.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/pmc.json
JSON is valid
tools/perf/pmu-events/arch/powerpc/power8/translation.json
JSON is valid
$
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kevin Mooney <kevin.mooney@arm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: nd@arm.com
Link: http://lore.kernel.org/lkml/20191112160342.26470-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Tue, 12 Nov 2019 16:03:39 +0000 (16:03 +0000)]
perf vendor events arm64: Fix commas so PMU event files are valid JSON
No functional change.
Add and remove extra commas in the arm64 JSON files so that the files
can be parsed and validated by other utilities such as Python that fail
to parse invalid JSON.
Committer testing:
Before:
$ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done
tools/perf/pmu-events/arch/arm64/ampere/emag/branch.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/bus.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/cache.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/clock.json
parse error: unallowed token at this point in JSON text
[ { "PublicDescrip
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/exception.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/instruction.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/intrinsic.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/memory.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/ampere/emag/pipeline.json
parse error: unallowed token at this point in JSON text
[ { "PublicDescrip
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/arm/cortex-a53/branch.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent": "BR
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/arm/cortex-a53/bus.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent":
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/arm/cortex-a53/other.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent":
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/arm/cortex-a57-a72/core-imp-def.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/armv8-recommended.json
parse error: after array element, I expect ',' or ']'
[ { "PublicDescrip
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/cavium/thunderx2/core-imp-def.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/core-imp-def.json
parse error: invalid object key (must be a string)
[ { "ArchStdEvent"
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-ddrc.json
parse error: invalid object key (must be a string)
[ { "EventCode": "0x00
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-hha.json
parse error: invalid object key (must be a string)
[ { "EventCode": "0x00
(right here) ------^
JSON is invalid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-l3c.json
parse error: invalid object key (must be a string)
[ { "EventCode": "0x00
(right here) ------^
JSON is invalid
$
After:
$ diffstat -l -p1 /wb/1.patch | while read filename ; do echo $filename ; cat $filename | json_verify ; done
tools/perf/pmu-events/arch/arm64/ampere/emag/branch.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/bus.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/cache.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/clock.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/exception.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/instruction.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/intrinsic.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/memory.json
JSON is valid
tools/perf/pmu-events/arch/arm64/ampere/emag/pipeline.json
JSON is valid
tools/perf/pmu-events/arch/arm64/arm/cortex-a53/branch.json
JSON is valid
tools/perf/pmu-events/arch/arm64/arm/cortex-a53/bus.json
JSON is valid
tools/perf/pmu-events/arch/arm64/arm/cortex-a53/other.json
JSON is valid
tools/perf/pmu-events/arch/arm64/arm/cortex-a57-a72/core-imp-def.json
JSON is valid
tools/perf/pmu-events/arch/arm64/armv8-recommended.json
JSON is valid
tools/perf/pmu-events/arch/arm64/cavium/thunderx2/core-imp-def.json
JSON is valid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/core-imp-def.json
JSON is valid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-ddrc.json
JSON is valid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-hha.json
JSON is valid
tools/perf/pmu-events/arch/arm64/hisilicon/hip08/uncore-l3c.json
JSON is valid
$
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kevin Mooney <kevin.mooney@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: nd@arm.com
Link: http://lore.kernel.org/lkml/20191112160342.26470-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Sat, 9 Nov 2019 07:58:40 +0000 (23:58 -0800)]
perf parse: Use YYABORT to clear stack after failure, plugging leaks
Using return rather than YYABORT means that the stack isn't cleared up
following a failure. The change to YYABORT means the return value is 1
rather than -1, but the callers just check for a result of 0 (success).
Add missing free of a list when an error occurs in event_pmu.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20191109075840.181231-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria [Fri, 8 Nov 2019 09:41:28 +0000 (15:11 +0530)]
perf tool: Provide an option to print perf_event_open args and return value
Perf record with verbose=2 already prints this information along with
whole lot of other traces which requires lot of scrolling. Introduce
an option to print only perf_event_open() arguments and return value.
Sample o/p:
$ perf --debug perf-event-open=1 record -- ls > /dev/null
------------------------------------------------------------
perf_event_attr:
size 112
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|PERIOD
read_format ID
disabled 1
inherit 1
exclude_kernel 1
mmap 1
comm 1
freq 1
enable_on_exec 1
task 1
precise_ip 3
sample_id_all 1
exclude_guest 1
mmap2 1
comm_exec 1
ksymbol 1
bpf_event 1
------------------------------------------------------------
sys_perf_event_open: pid 4308 cpu 0 group_fd -1 flags 0x8 = 4
sys_perf_event_open: pid 4308 cpu 1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid 4308 cpu 2 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid 4308 cpu 3 group_fd -1 flags 0x8 = 8
sys_perf_event_open: pid 4308 cpu 4 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid 4308 cpu 5 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid 4308 cpu 6 group_fd -1 flags 0x8 = 11
sys_perf_event_open: pid 4308 cpu 7 group_fd -1 flags 0x8 = 12
------------------------------------------------------------
perf_event_attr:
type 1
size 112
config 0x9
watermark 1
sample_id_all 1
bpf_event 1
{ wakeup_events, wakeup_watermark } 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8
sys_perf_event_open failed, error -13
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (9 samples) ]
Committer notes:
Just like the 'verbose' variable this new 'debug_peo_args' needs to be
added to util/python.c, since we don't link the debug.o file in the
python binding, which ended up making 'perf test python' fail with:
# perf test -v python
18: 'import perf' in python :
--- start ---
test child forked, pid 19237
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf/python/perf.so: undefined symbol: debug_peo_args
test child finished with -1
---- end ----
'import perf' in python: FAILED!
#
After adding that new variable to util/python.c:
# perf test -v python
18: 'import perf' in python :
--- start ---
test child forked, pid 22364
test child finished with 0
---- end ----
'import perf' in python: Ok
#
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20191108094128.28769-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Nov 2019 19:55:53 +0000 (16:55 -0300)]
perf map: Remove ->groups from 'struct map'
With this 'struct map' uses a bit over 3 cachelines:
$ pahole -C map ~/bin/perf
<SNIP>
/* --- cacheline 2 boundary (128 bytes) --- */
u64 (*unmap_ip)(struct map *, u64); /* 128 8 */
struct dso * dso; /* 136 8 */
refcount_t refcnt; /* 144 4 */
/* size: 152, cachelines: 3, members: 18 */
/* sum members: 145, holes: 1, sum holes: 3 */
/* padding: 4 */
/* forced alignments: 2 */
/* last cacheline: 24 bytes */
} __attribute__((__aligned__(8)));
$
We probably can move map->map/unmap_ip() moved to 'struct map_groups',
that will shave more 16 bytes, getting this almost to two cachelines.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ymlv3nzpofv2fugnjnizkrwy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 1 Nov 2019 20:53:02 +0000 (17:53 -0300)]
perf map: Combine maps__fixup_overlappings with its only use
In the process we can kill some of the struct map->groups usage, trying
to get rid of this per-full struct map fields getting in the way of
sharing a map across father/parent processes.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-e50eqtqw3za24vmbjnqmmcs6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Nov 2019 19:52:19 +0000 (16:52 -0300)]
perf annotate: Stop using map->groups, use map_symbol->mg instead
These were the last uses of map->groups, next cset will nuke it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-n3g0foos7l7uxq9nar0zo0vj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Nov 2019 19:02:35 +0000 (16:02 -0300)]
perf tools: Add a 'struct map_groups' pointer to 'struct map_symbol'
And fill it whenever we setup a a 'struct map_symbol', now we need to
use it, next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-fzwfcnddenz1o7uj1fzw3g46@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Nov 2019 19:25:11 +0000 (16:25 -0300)]
perf symbols: Use kmaps(map)->machine when we know its a kernel map
And then stop using map->groups to achieve that.
To test that that branch is being taken, probe the function that is only
called from there and then run something like 'perf top' in another
xterm:
# perf probe -x ~/bin/perf machine__map_x86_64_entry_trampolines
Added new event:
probe_perf:machine__map_x86_64_entry_trampolines (on machine__map_x86_64_entry_trampolines in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:machine__map_x86_64_entry_trampolines -aR sleep 1
# perf trace -e probe_perf:*
0.000 bash/10614 probe_perf:machine__map_x86_64_entry_trampolines(__probe_ip:
5224944)
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-lgrrzdxo2p9liq2keivcg887@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Nov 2019 18:57:38 +0000 (15:57 -0300)]
pref tools: Make 'struct addr_map_symbol' contain 'struct map_symbol'
So that we pass that substructure around and with it consolidate lots of
functions that receive a (map, symbol) pair and now can receive just a
'struct map_symbol' pointer.
This further paves the way to add 'struct map_groups' to 'struct
map_symbol' so that we can have all we need for annotation so that we
can ditch 'struct map'->groups, i.e. have the map_groups pointer in a
more central place, avoiding the pointer in the 'struct map' that have
tons of instances.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-fs90ttd9q12l7989fo7pw81q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Nov 2019 15:14:32 +0000 (12:14 -0300)]
perf callchain: Use 'struct map_symbol' in 'struct callchain_cursor_node'
To ease passing around map+symbol, just like done for other parts of the
tree recently.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Nov 2019 14:58:21 +0000 (11:58 -0300)]
perf unwind: Use 'struct map_symbol' in 'struct unwind_entry'
To help in passing that info around to callchain routines that, for the
same reason, are moving to use 'struct map_symbol'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-epsiibeprpxa8qpwji47uskc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Nov 2019 14:10:00 +0000 (11:10 -0300)]
perf annotate: Pass a 'map_symbol' in places receiving a pair of 'map' and 'symbol' pointers
We are already passing things like:
symbol__annotate(ms->sym, ms->map, ...)
So shorten the signature of such functions to receive the 'map_symbol'
pointer.
This also paves the way to having the 'struct map_groups' pointer in the
'struct map_symbol' so that we can get rid of 'struct map'->groups.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-23yx8v1t41nzpkpi7rdrozww@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Nov 2019 12:59:48 +0000 (09:59 -0300)]
perf tools: Add map_groups to 'struct addr_location'
From there we can get al->mg->machine, so replace that field with the
more useful 'struct map_groups' that for now we're obtaining from
al->map->groups, and that is one thing getting into the way of maps
being fully shareable.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-4qdducrm32tgrjupcp0kjh1e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Nov 2019 13:14:05 +0000 (10:14 -0300)]
perf map_groups: Pass the object to map_groups__find_ams()
We were just passing a map to look for and reuse its map->groups member,
but the idea is that this is going away, as a map can be in multiple
rb_trees when being reused via a map_node, so do as all the other
map_groups methods and pass as its first arg the object being operated
on.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-nmi2pbggqloogwl6vxrvex5a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Nov 2019 19:09:48 +0000 (16:09 -0300)]
perf symbols: Stop using map->groups, we can use kmaps instead
To test that that function is being called I just added a probe on that
place, enabled it via 'perf trace' asking for at most 16 levels of
backtraces, system wide, and then ran 'perf top' on another xterm,
voilà:
# perf probe -x ~/bin/perf dso__process_kernel_symbol
Added new event:
probe_perf:dso__process_kernel_symbol (on dso__process_kernel_symbol in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:dso__process_kernel_symbol -aR sleep 1
# perf trace -e probe_perf:dso__process_kernel_symbol/max-stack=16/ --max-events=2
# perf trace -e probe_perf:dso__process_kernel_symbol/max-stack=16/ --max-events=2
0.000 :17345/17345 probe_perf:dso__process_kernel_symbol(__probe_ip:
5680224)
dso__process_kernel_symbol (/home/acme/bin/perf)
dso__load_vmlinux (/home/acme/bin/perf)
dso__load_vmlinux_path (/home/acme/bin/perf)
dso__load (/home/acme/bin/perf)
map__load (/home/acme/bin/perf)
thread__find_map (/home/acme/bin/perf)
machine__resolve (/home/acme/bin/perf)
deliver_event (/home/acme/bin/perf)
__ordered_events__flush.part.0 (/home/acme/bin/perf)
process_thread (/home/acme/bin/perf)
start_thread (/usr/lib64/libpthread-2.29.so)
0.064 :17345/17345 probe_perf:dso__process_kernel_symbol(__probe_ip:
5680224)
dso__process_kernel_symbol (/home/acme/bin/perf)
dso__load_vmlinux (/home/acme/bin/perf)
dso__load_vmlinux_path (/home/acme/bin/perf)
dso__load (/home/acme/bin/perf)
map__load (/home/acme/bin/perf)
thread__find_map (/home/acme/bin/perf)
machine__resolve (/home/acme/bin/perf)
deliver_event (/home/acme/bin/perf)
__ordered_events__flush.part.0 (/home/acme/bin/perf)
process_thread (/home/acme/bin/perf)
start_thread (/usr/lib64/libpthread-2.29.so)
#
# perf stat -e probe_perf:dso__process_kernel_symbol
^C
Performance counter stats for 'system wide':
107,308 probe_perf:dso__process_kernel_symbol
8.
215399813 seconds time elapsed
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5fy66x5hr5ct9pmw84jkiwvm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 4 Nov 2019 19:31:33 +0000 (16:31 -0300)]
perf map: Use map->dso->kernel + map__kmaps() in map__kmaps()
Its equivalent to using map->groups to obtain the machine struct.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-bdbazuj4ggrmzxdviaqdrdwh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Tue, 12 Nov 2019 11:06:08 +0000 (12:06 +0100)]
Merge tag 'perf-core-for-mingo-5.5-
20191107' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf report:
Jin Yao:
- Introduce --total-cycles, for basic block profiling, further using data
obtained from LBR, an example should suffice:
# perf record -b
^C[ perf record: Woken up 595 times to write data ]
[ perf record: Captured and wrote 156.672 MB perf.data (196873 samples) ]
# perf evlist -v
cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: ANY
# perf report --total-cycles --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 6M of event 'cycles'
# Event count (approx.):
6299936
#
# Sampled Sampled Avg Avg
# Cycles% Cycles Cycles% Cycles [Program Block Range] Shared Object
# ....... ...... ....... ..... .................................... ................
#
2.17% 1.7M 0.08% 607 [compiler.h:199 -> common.c:221] [kernel.vmlinux]
0.72% 544.5K 0.03% 230 [entry_64.S:657 -> entry_64.S:662] [kernel.vmlinux]
0.56% 541.8K 0.09% 672 [compiler.h:199 -> common.c:300] [kernel.vmlinux]
0.39% 293.2K 0.01% 104 [list_debug.c:43 -> list_debug.c:61] [kernel.vmlinux]
0.36% 278.6K 0.03% 272 [entry_64.S:1289 -> entry_64.S:1308] [kernel.vmlinux]
perf record:
Adrian Hunter:
- Allow storing perf.data in a directory together with a copy of /proc/kcore.
Jiwei Sun:
- Add support for limit perf output file size, i.e.:
# perf record --all-cpus -F 10000 --max-size=4M sleep 10h
[ perf record: perf size limit reached (4097 KB), stopping session ]
[ perf record: Woken up 6 times to write data ]
[ perf record: Captured and wrote 4.048 MB perf.data (54094 samples) ]
Terminated
# ls -lah perf.data
-rw-------. 1 root root 4.1M Nov 7 15:27 perf.data
#
perf stat:
Jiri Olsa:
- Add --per-node agregation support:
In live mode:
# perf stat -a -I 1000 -e cycles --per-node
# time node cpus counts unit events
1.
000542550 N0 20 6,202,097 cycles
1.
000542550 N1 20 639,559 cycles
2.
002040063 N0 20 7,412,495 cycles
2.
002040063 N1 20 2,185,577 cycles
3.
003451699 N0 20 6,508,917 cycles
3.
003451699 N1 20 765,607 cycles
...
Or in the record/report stat session:
# perf stat record -a -I 1000 -e cycles
# time counts unit events
1.
000536937 10,008,468 cycles
2.
002090152 9,578,539 cycles
3.
003625233 7,647,869 cycles
4.
005135036 7,032,086 cycles
^C 4.
340902364 3,923,893 cycles
# perf stat report --per-node
# time node cpus counts unit events
1.
000536937 N0 20 9,355,086 cycles
1.
000536937 N1 20 653,382 cycles
2.
002090152 N0 20 7,712,838 cycles
2.
002090152 N1 20 1,865,701 cycles
...
perf probe:
Masami Hiramatsu:
Various fixes related to recent additions to the DWARF format:
- Fix to find range-only function instance
- Walk function lines in lexical blocks
- Fix to show function entry line as probe-able
- Fix wrong address verification
- Fix to probe a function which has no entry pc
- Fix to probe an inline function which has no entry pc
- Fix to list probe event with correct line number
- Fix to show inlined function callsite without entry_pc
- Fix to show ranges of variables in functions without entry_pc
- Return a better scope DIE if there is no best scope
- Skip end-of-sequence and non statement lines
- Filter out instances except for inlined subroutine and subprogram
- Fix to show calling lines of inlined functions
- Skip overlapped location on searching variables
perf inject:
Adrian Hunter:
- Do not strip evsels with --strip, as they are needed for create_gcov
(see the autofdo example in tools/perf/Documentation/intel-pt.txt).
Intel PT:
Adrian Hunter:
- Intel PT uses an auxtrace_cache to store the results of code-walking, to avoid
repeated decoding. Add an auxtrace_cache__remove to handle text poke events.
core:
Andi Kleen:
- Always preserve errno while cleaning up perf_event_open failures.
llvm:
Arnaldo Carvalho de Melo:
- No need to tell that the request for saving a .o file for BPF events, as
expressed in ~/.perfconfig was satisfied, make that a debug message.
perf vendor events:
Intel:
Haiyan Song:
- Update CascadelakeX events to v1.05.
- Update all the Intel JSON metrics from TMAM 3.6.
Treewide:
Ian Rogers:
- Improve error paths, plugging leaks found using LLVM tools
such as libFuzzer.
jevents:
Yunfeng Ye:
- Fix resource leak in process_mapfile() and main()
perf kvm:
Igor Lubashev:
- Use evlist layer api when possible.
libsubcmd:
James Clark:
- Move EXTRA_FLAGS to the end to allow overriding existing flags.
- Use -O0 with DEBUG=1
perf diff:
Jin Yao:
- Don't use hack to skip column length calculation
CoreSight ETM:
Leo yan:
- Fix definition of macro TO_CS_QUEUE_NR
ARM64:
John Garry:
- Do not try to include libelf header files when its feature detection
failed, fixing the cross build for ARM64.
perf tests:
Leo Yan:
- Fix out of bounds memory access in the backward ring buffer test.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Zheng Yongjun [Sun, 10 Nov 2019 09:44:53 +0000 (17:44 +0800)]
perf/x86/amd: Remove set but not used variable 'active'
'-Wunused-but-set-variable' triggers this warning:
arch/x86/events/amd/core.c: In function amd_pmu_handle_irq:
arch/x86/events/amd/core.c:656:6: warning: variable active set but not used [-Wunused-but-set-variable]
GCC is right, 'active' is not used anymore.
This variable was introduced earlier this year and then removed in:
df4d29732fdad perf/x86/amd: Change/fix NMI latency mitigation to use a timestamp
[ mingo: Improved the changelog, fixed build warning caused by this fix, improved surrounding code. ]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Cc: <acme@kernel.org>
Cc: <alexander.shishkin@linux.intel.com>
Cc: <mark.rutland@arm.com>
Cc: <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191110094453.113001-1-zhengyongjun3@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Mon, 11 Nov 2019 06:59:06 +0000 (07:59 +0100)]
Merge tag 'v5.4-rc7' into perf/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Mon, 11 Nov 2019 00:17:15 +0000 (16:17 -0800)]
Linux 5.4-rc7
Linus Torvalds [Sun, 10 Nov 2019 21:41:59 +0000 (13:41 -0800)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A set of fixes that have trickled in over the last couple of weeks:
- MAINTAINER update for Cavium/Marvell ThunderX2
- stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for
CAN interfaces
- i.MX fixes for voltage regulator GPIO mappings, fixes voltage
scaling issues
- More i.MX fixes for various issues on i.MX eval boards: interrupt
storm due to u-boot leaving pins in new states, fixing power button
config, a couple of compatible-string corrections.
- Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets
- A few documentation tweaks and a fix of a memory leak in the reset
subsystem"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: update Cavium ThunderX2 maintainers
ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
arm64: dts: zii-ultra: fix ARM regulator GPIO handle
ARM: sunxi: Fix CPU powerdown on A83T
ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend
arm64: dts: imx8mn: fix compatible string for sdma
arm64: dts: imx8mm: fix compatible string for sdma
reset: fix reset_control_ops kerneldoc comment
ARM: dts: imx6-logicpd: Re-enable SNVS power key
soc: imx: gpc: fix initialiser format
ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts
arm64: dts: ls1028a: fix a compatible issue
reset: fix reset_control_get_exclusive kerneldoc comment
reset: fix reset_control_lookup kerneldoc comment
reset: fix of_reset_control_get_count kerneldoc comment
reset: fix of_reset_simple_xlate kerneldoc comment
reset: Fix memory leak in reset_control_array_put()
Linus Torvalds [Sun, 10 Nov 2019 21:29:12 +0000 (13:29 -0800)]
Merge tag 'staging-5.4-rc7' of git://git./linux/kernel/git/gregkh/staging
Pull IIO fixes and staging driver from Greg KH:
"Here is a mix of a number of IIO driver fixes for 5.4-rc7, and a whole
new staging driver.
The IIO fixes resolve some reported issues, all are tiny.
The staging driver addition is the vboxsf filesystem, which is the
VirtualBox guest shared folder code. Hans has been trying to get
filesystem reviewers to review the code for many months now, and
Christoph finally said to just merge it in staging now as it is
stand-alone and the filesystem people can review it easier over time
that way.
I know it's late for this big of an addition, but it is stand-alone.
The code has been in linux-next for a while, long enough to pick up a
few tiny fixes for it already so people are looking at it.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: Fix error return code in vboxsf_fill_super()
staging: vboxsf: fix dereference of pointer dentry before it is null checked
staging: vboxsf: Remove unused including <linux/version.h>
staging: Add VirtualBox guest shared folder (vboxsf) support
iio: adc: stm32-adc: fix stopping dma
iio: imu: inv_mpu6050: fix no data on MPU6050
iio: srf04: fix wrong limitation in distance measuring
iio: imu: adis16480: make sure provided frequency is positive
Linus Torvalds [Sun, 10 Nov 2019 21:14:48 +0000 (13:14 -0800)]
Merge tag 'char-misc-5.4-rc7' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of late-arrival driver fixes for issues reported for
some char/misc drivers for 5.4-rc7
These all come from the different subsystem/driver maintainers as
things that they had reports for and wanted to see fixed.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
intel_th: pci: Add Jasper Lake PCH support
intel_th: pci: Add Comet Lake PCH support
intel_th: msu: Fix possible memory leak in mode_store()
intel_th: msu: Fix overflow in shift of an unsigned int
intel_th: msu: Fix missing allocation failure check on a kstrndup
intel_th: msu: Fix an uninitialized mutex
intel_th: gth: Fix the window switching sequence
soundwire: slave: fix scanf format
soundwire: intel: fix intel_register_dai PDI offsets and numbers
interconnect: Add locking in icc_set_tag()
interconnect: qcom: Fix icc_onecell_data allocation
soundwire: depend on ACPI || OF
soundwire: depend on ACPI
thunderbolt: Drop unnecessary read when writing LC command in Ice Lake
thunderbolt: Fix lockdep circular locking depedency warning
thunderbolt: Read DP IN adapter first two dwords in one go
Linus Torvalds [Sun, 10 Nov 2019 20:59:34 +0000 (12:59 -0800)]
Merge tag 'configfs-for-5.4-2' of git://git.infradead.org/users/hch/configfs
Pull configfs regression fix from Christoph Hellwig:
"Fix a regression from this merge window in the configfs symlink
handling (Honggang Li)"
* tag 'configfs-for-5.4-2' of git://git.infradead.org/users/hch/configfs:
configfs: calculate the depth of parent item
Linus Torvalds [Sun, 10 Nov 2019 20:07:47 +0000 (12:07 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of fixes for x86:
- Make the tsc=reliable/nowatchdog command line parameter work again.
It was broken with the introduction of the early TSC clocksource.
- Prevent the evaluation of exception stacks before they are set up.
This causes a crash in dumpstack because the stack walk termination
gets screwed up.
- Prevent a NULL pointer dereference in the rescource control file
system.
- Avoid bogus warnings about APIC id mismatch related to the LDR
which can happen when the LDR is not in use and therefore not
initialized. Only evaluate that when the APIC is in logical
destination mode"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Respect tsc command line paraemeter for clocksource_tsc_early
x86/dumpstack/64: Don't evaluate exception stacks before setup
x86/apic/32: Avoid bogus LDR warnings
x86/resctrl: Prevent NULL pointer dereference when reading mondata
Linus Torvalds [Sun, 10 Nov 2019 20:03:58 +0000 (12:03 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for timekeepoing and clocksource drivers:
- VDSO data was updated conditional on the availability of a VDSO
capable clocksource. This causes the VDSO functions which do not
depend on a VDSO capable clocksource to operate on stale data.
Always update unconditionally.
- Prevent a double free in the mediatek driver
- Use the proper helper in the sh_mtu2 driver so it won't attempt to
initialize non-existing interrupts"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping/vsyscall: Update VDSO data unconditionally
clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name()
clocksource/drivers/mediatek: Fix error handling
Linus Torvalds [Sun, 10 Nov 2019 20:00:47 +0000 (12:00 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Two fixes for scheduler regressions:
- Plug a subtle race condition which was introduced with the rework
of the next task selection functionality. The change of task
properties became unprotected which can be observed inconsistently
causing state corruption.
- A trivial compile fix for CONFIG_CGROUPS=n"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix pick_next_task() vs 'change' pattern race
sched/core: Fix compilation error when cgroup not selected
Linus Torvalds [Sun, 10 Nov 2019 19:55:53 +0000 (11:55 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf tooling fixes from Thomas Gleixner:
- Fix the time sorting algorithm which was broken due to truncation of
big numbers
- Fix the python script generator fail caused by a broken tracepoint
array iterator
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix time sorting
perf tools: Remove unused trace_find_next_event()
perf scripting engines: Iterate on tep event arrays directly
Linus Torvalds [Sun, 10 Nov 2019 19:51:11 +0000 (11:51 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fixlet from Thomas Gleixner:
"A trivial fix for a kernel doc regression where an argument change was
not reflected in the documentation"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq/irqdomain: Update __irq_domain_alloc_fwnode() function documentation
Linus Torvalds [Sun, 10 Nov 2019 19:47:39 +0000 (11:47 -0800)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull stacktrace fix from Thomas Gleixner:
"A small fix for a stacktrace regression.
Saving a stacktrace for a foreign task skipped an extra entry which
makes e.g. the output of /proc/$PID/stack incomplete"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stacktrace: Don't skip first entry on noncurrent tasks
Linus Torvalds [Sun, 10 Nov 2019 19:43:18 +0000 (11:43 -0800)]
Merge tag '5.4-rc7-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fix from Steve French:
"Small fix for an smb3 reconnect bug (also marked for stable)"
* tag '5.4-rc7-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
SMB3: Fix persistent handles reconnect
Corentin Labbe [Sun, 10 Nov 2019 16:27:54 +0000 (16:27 +0000)]
lib: Remove select of inexistant GENERIC_IO
config option GENERIC_IO was removed but still selected by lib/kconfig
This patch finish the cleaning.
Fixes: 9de8da47742b ("kconfig: kill off GENERIC_IO option")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 10 Nov 2019 00:47:34 +0000 (16:47 -0800)]
Merge tag 'pinctrl-v5.4-3' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix glitch risks in the Intel GPIO
- Fix the Intel Cherryview valid irq mask calculation.
- Allocate the Intel Cherryview irqchip dynamically.
- Fix the valid mask init sequency on the ST STMFX driver.
* tag 'pinctrl-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: stmfx: fix valid_mask init sequence
pinctrl: cherryview: Allocate IRQ chip dynamic
pinctrl: cherryview: Fix irq_valid_mask calculation
pinctrl: intel: Avoid potential glitches if pin is in GPIO mode
Linus Torvalds [Sat, 9 Nov 2019 16:51:37 +0000 (08:51 -0800)]
Merge tag 'for-5.4-rc6-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few regressions and fixes for stable.
Regressions:
- fix a race leading to metadata space leak after task received a
signal
- un-deprecate 2 ioctls, marked as deprecated by mistake
Fixes:
- fix limit check for number of devices during chunk allocation
- fix a race due to double evaluation of i_size_read inside max()
macro, can cause a crash
- remove wrong device id check in tree-checker"
* tag 'for-5.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: un-deprecate ioctls START_SYNC and WAIT_SYNC
btrfs: save i_size to avoid double evaluation of i_size_read in compress_file_range
Btrfs: fix race leading to metadata space leak after task received signal
btrfs: tree-checker: Fix wrong check on max devid
btrfs: Consider system chunk array size for new SYSTEM chunks
Linus Torvalds [Sat, 9 Nov 2019 16:47:03 +0000 (08:47 -0800)]
Merge tag 'linux-watchdog-5.4-rc7' of git://linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
- cpwd: fix build regression
- pm8916_wdt: fix pretimeout registration flow
- meson: Fix the wrong value of left time
- imx_sc_wdt: Pretimeout should follow SCU firmware format
-
bd70528: Add MODULE_ALIAS to allow module auto loading
* tag 'linux-watchdog-5.4-rc7' of git://www.linux-watchdog.org/linux-watchdog:
watchdog:
bd70528: Add MODULE_ALIAS to allow module auto loading
watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware format
watchdog: meson: Fix the wrong value of left time
watchdog: pm8916_wdt: fix pretimeout registration flow
watchdog: cpwd: fix build regression
Linus Torvalds [Sat, 9 Nov 2019 02:21:05 +0000 (18:21 -0800)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) BPF sample build fixes from Björn Töpel
2) Fix powerpc bpf tail call implementation, from Eric Dumazet.
3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet.
4) Fix crash in ebtables when using dnat target, from Florian Westphal.
5) Fix port disable handling whne removing bcm_sf2 driver, from Florian
Fainelli.
6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski.
7) Various KCSAN fixes all over the networking, from Eric Dumazet.
8) Memory leaks in mlx5 driver, from Alex Vesker.
9) SMC interface refcounting fix, from Ursula Braun.
10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu.
11) Add a TX lock to synchonize the kTLS TX path properly with crypto
operations. From Jakub Kicinski.
12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano
Garzarella.
13) Infinite loop in Intel ice driver, from Colin Ian King.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
ixgbe: need_wakeup flag might not be set for Tx
i40e: need_wakeup flag might not be set for Tx
igb/igc: use ktime accessors for skb->tstamp
i40e: Fix for ethtool -m issue on X722 NIC
iavf: initialize ITRN registers with correct values
ice: fix potential infinite loop because loop counter being too small
qede: fix NULL pointer deref in __qede_remove()
net: fix data-race in neigh_event_send()
vsock/virtio: fix sock refcnt holding during the shutdown
net: ethernet: octeon_mgmt: Account for second possible VLAN header
mac80211: fix station inactive_time shortly after boot
net/fq_impl: Switch to kvmalloc() for memory allocation
mac80211: fix ieee80211_txq_setup_flows() failure path
ipv4: Fix table id reference in fib_sync_down_addr
ipv6: fixes rt6_probe() and fib6_nh->last_probe init
net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
net: usb: qmi_wwan: add support for DW5821e with eSIM support
CDC-NCM: handle incomplete transfer of MTU
nfc: netlink: fix double device reference drop
NFC: st21nfca: fix double free
...
Linus Torvalds [Sat, 9 Nov 2019 02:15:55 +0000 (18:15 -0800)]
Merge tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Two NVMe device removal crash fixes, and a compat fixup for for an
ioctl that was introduced in this release (Anton, Charles, Max - via
Keith)
- Missing error path mutex unlock for drbd (Dan)
- cgroup writeback fixup on dead memcg (Tejun)
- blkcg online stats print fix (Tejun)
* tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block:
cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead
block: drbd: remove a stray unlock in __drbd_send_protocol()
blkcg: make blkcg_print_stat() print stats only for online blkgs
nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme-rdma: fix a segmentation fault during module unload
David S. Miller [Sat, 9 Nov 2019 00:50:14 +0000 (16:50 -0800)]
Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/net-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2019-11-08
This series contains fixes to igb, igc, ixgbe, i40e, iavf and ice
drivers.
Colin Ian King fixes a potentially wrap-around counter in a for-loop.
Nick fixes the default ITR values for the iavf driver to 50 usecs
interval.
Arkadiusz fixes 'ethtool -m' for X722 devices where the correct value
cannot be obtained from the firmware, so add X722 to the check to ensure
the wrong value is not returned.
Jake fixes igb and igc drivers in their implementation of launch time
support by declaring skb->tstamp value as ktime_t instead of s64.
Magnus fixes ixgbe and i40e where the need_wakeup flag for transmit may
not be set for AF_XDP sockets that are only used to send packets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Magnus Karlsson [Fri, 8 Nov 2019 19:58:10 +0000 (20:58 +0100)]
ixgbe: need_wakeup flag might not be set for Tx
The need_wakeup flag for Tx might not be set for AF_XDP sockets that
are only used to send packets. This happens if there is at least one
outstanding packet that has not been completed by the hardware and we
get that corresponding completion (which will not generate an
interrupt since interrupts are disabled in the napi poll loop) between
the time we stopped processing the Tx completions and interrupts are
enabled again. In this case, the need_wakeup flag will have been
cleared at the end of the Tx completion processing as we believe we
will get an interrupt from the outstanding completion at a later point
in time. But if this completion interrupt occurs before interrupts
are enable, we lose it and should at that point really have set the
need_wakeup flag since there are no more outstanding completions that
can generate an interrupt to continue the processing. When this
happens, user space will see a Tx queue need_wakeup of 0 and skip
issuing a syscall, which means will never get into the Tx processing
again and we have a deadlock.
This patch introduces a quick fix for this issue by just setting the
need_wakeup flag for Tx to 1 all the time. I am working on a proper
fix for this that will toggle the flag appropriately, but it is more
challenging than I anticipated and I am afraid that this patch will
not be completed before the merge window closes, therefore this easier
fix for now. This fix has a negative performance impact in the range
of 0% to 4%. Towards the higher end of the scale if you have driver
and application on the same core and issue a lot of packets, and
towards no negative impact if you use two cores, lower transmission
speeds and/or a workload that also receives packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Magnus Karlsson [Fri, 8 Nov 2019 19:58:09 +0000 (20:58 +0100)]
i40e: need_wakeup flag might not be set for Tx
The need_wakeup flag for Tx might not be set for AF_XDP sockets that
are only used to send packets. This happens if there is at least one
outstanding packet that has not been completed by the hardware and we
get that corresponding completion (which will not generate an
interrupt since interrupts are disabled in the napi poll loop) between
the time we stopped processing the Tx completions and interrupts are
enabled again. In this case, the need_wakeup flag will have been
cleared at the end of the Tx completion processing as we believe we
will get an interrupt from the outstanding completion at a later point
in time. But if this completion interrupt occurs before interrupts
are enable, we lose it and should at that point really have set the
need_wakeup flag since there are no more outstanding completions that
can generate an interrupt to continue the processing. When this
happens, user space will see a Tx queue need_wakeup of 0 and skip
issuing a syscall, which means will never get into the Tx processing
again and we have a deadlock.
This patch introduces a quick fix for this issue by just setting the
need_wakeup flag for Tx to 1 all the time. I am working on a proper
fix for this that will toggle the flag appropriately, but it is more
challenging than I anticipated and I am afraid that this patch will
not be completed before the merge window closes, therefore this easier
fix for now. This fix has a negative performance impact in the range
of 0% to 4%. Towards the higher end of the scale if you have driver
and application on the same core and issue a lot of packets, and
towards no negative impact if you use two cores, lower transmission
speeds and/or a workload that also receives packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
projects / openwrt / staging / blogic.git / log