Jonas Gorski [Mon, 13 Jan 2014 12:13:15 +0000 (12:13 +0000)]
brcm63xx: remove non runtime detect and refresh affinity patches
Remove the non runtime detect code since its effectiveness is dubious
and almost never used.
Also update affinity patches to work on top of it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39268
Jonas Gorski [Mon, 13 Jan 2014 12:13:05 +0000 (12:13 +0000)]
brcm63xx: update bmips patches with upstream submission
Update bmips cleanup patches with upstream submission and backport a few
bmips fixes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39267
Jonas Gorski [Mon, 13 Jan 2014 12:12:50 +0000 (12:12 +0000)]
brcm63xx: spi flash on legacy spi controller needs the workaround
Fixes generic SPI flash accesses on BCM6358/BCM6368. BCM6338 still needs
additional fixes for M25P80, so it remains broken for now.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39266
Jonas Gorski [Mon, 13 Jan 2014 12:11:58 +0000 (12:11 +0000)]
brcm63xx: fix legacy spi tranfers >= 256 bytes
Fixes e.g. SPI flash access on BCM6358/BCM6368. Transfers < 256 bytes
are not affected.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39265
Jonas Gorski [Mon, 13 Jan 2014 12:11:45 +0000 (12:11 +0000)]
brcm63xx: update HSSPI driver with upstream submission
Update the HSSPI driver with the upstream submitted one that has a
workaround for the auto cs down issue.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39264
Zoltan Herpai [Sun, 12 Jan 2014 19:23:29 +0000 (19:23 +0000)]
sunxi: various changes - rename hstimer DT on sun5i to avoid confusion - add Cubietruck support - select watchdog by default - select rtc in profiles where appropriate - cosmetic changes
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39263
Hauke Mehrtens [Sun, 12 Jan 2014 19:17:49 +0000 (19:17 +0000)]
x86: remove unused code for kernel 3.7
There are no generic patches for kernel 3.7 any more, remove this stuff.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39262
Zoltan Herpai [Sun, 12 Jan 2014 19:16:35 +0000 (19:16 +0000)]
uboot-sunxi: - add support for Cubietruck - cosmetic change: have the options listed alphabetically
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39261
Hauke Mehrtens [Sun, 12 Jan 2014 19:04:54 +0000 (19:04 +0000)]
brcm47xx: add brcmsmac + bgmac profile
Signed-off-by: Cody P Schafer <devel@codyps.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39258
Hauke Mehrtens [Sun, 12 Jan 2014 18:57:16 +0000 (18:57 +0000)]
broadcom-diag: remove devices already supported by the kernel
This driver will soon be removed completely and the scripts are already
using the new API.
This also removes bcm57xx_init() which restarts the switch and is now
done by b53.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39257
Hauke Mehrtens [Sun, 12 Jan 2014 18:56:57 +0000 (18:56 +0000)]
brcm47xx: parse model from cpuinfo
Instead of looking into the proc entry provided by broadcom-diag use
the board info from /proc/cpuinfo to get the board we are on.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39256
Hauke Mehrtens [Sun, 12 Jan 2014 18:56:36 +0000 (18:56 +0000)]
brcm47xx: fix led indication
Use the new led api also on brcm47xx.
The led for failsafe indication is searched for.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39255
Hauke Mehrtens [Sun, 12 Jan 2014 18:56:15 +0000 (18:56 +0000)]
brcm47xx: fix network failsafe indication
Remove the code used on the old switch driver.
The Ethernet drive is loaded as a module and needs some time to get up
therefor we added some wait function.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39254
Hauke Mehrtens [Sun, 12 Jan 2014 18:55:52 +0000 (18:55 +0000)]
brcm47xx: do not use broadcom-diag
This makes brcm47xx target use the default gpio led and button driver
and not broadcom-diag any more.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39253
Hauke Mehrtens [Sun, 12 Jan 2014 18:55:25 +0000 (18:55 +0000)]
brcm47xx: add new led and button support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39252
Hauke Mehrtens [Sun, 12 Jan 2014 18:54:38 +0000 (18:54 +0000)]
brcm47xx: update some patches to versions in linux mainline
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39251
Hauke Mehrtens [Sun, 12 Jan 2014 18:51:45 +0000 (18:51 +0000)]
brcm74xx: fix patch for BCM4706 CPUs
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39250
Hauke Mehrtens [Sun, 12 Jan 2014 18:50:45 +0000 (18:50 +0000)]
brcm47xx: update mtd drivers
This backports some patches from linux upstream.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39249
John Crispin [Sun, 12 Jan 2014 17:26:24 +0000 (17:26 +0000)]
ralink: don't build mkhilinkfw untilt he ssl header dependency is resolved
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39248
Gabor Juhos [Sun, 12 Jan 2014 14:16:18 +0000 (14:16 +0000)]
mpc85xx: preallocate SPI transfer buffer
This helps to avoid high order alloction failures.
Closes #14702.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39247
John Crispin [Sun, 12 Jan 2014 14:07:01 +0000 (14:07 +0000)]
ubox: welcome to 2014
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39246
John Crispin [Sun, 12 Jan 2014 14:03:15 +0000 (14:03 +0000)]
ralink: fix eeprom loading
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39245
John Crispin [Sun, 12 Jan 2014 14:03:10 +0000 (14:03 +0000)]
ubox: update to latest git - fixes error reporting Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39244
John Crispin [Sun, 12 Jan 2014 14:03:05 +0000 (14:03 +0000)]
firmware-utils: mkhilinkfw breaks the build bots
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39243
John Crispin [Sun, 12 Jan 2014 12:27:32 +0000 (12:27 +0000)]
Fix build for individual profiles with dashes in names
Config symbols can have regular dashes, e.g.
CONFIG_TARGET_ramips_rt305x_UR-336UN=y
So no substitution should be performed on the last part of the symbol.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 39242
John Crispin [Sun, 12 Jan 2014 12:12:58 +0000 (12:12 +0000)]
ralink: fix WHR-600D and WHR-300HP image generation
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39241
John Crispin [Sun, 12 Jan 2014 12:12:53 +0000 (12:12 +0000)]
ralink: fix WHR-600D pcie support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39240
John Crispin [Sun, 12 Jan 2014 12:07:51 +0000 (12:07 +0000)]
mac80211: enable ralink ap+sta support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39239
John Crispin [Sun, 12 Jan 2014 12:07:46 +0000 (12:07 +0000)]
firmware-utils: add HLK-RM04 tool
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39238
John Crispin [Sun, 12 Jan 2014 12:07:40 +0000 (12:07 +0000)]
ralink: add HLK-RM04 support
https://github.com/JiapengLi/OpenWrt-HiLink-HLK-RM04
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39237
John Crispin [Sun, 12 Jan 2014 12:07:34 +0000 (12:07 +0000)]
ralink: switch to askconsole
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39236
John Crispin [Sun, 12 Jan 2014 12:07:30 +0000 (12:07 +0000)]
ralink: fix uartf memory range size
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39235
John Crispin [Sun, 12 Jan 2014 12:07:26 +0000 (12:07 +0000)]
ralink: honour memory@0 node
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39234
John Crispin [Sun, 12 Jan 2014 12:07:20 +0000 (12:07 +0000)]
ralink: fix rt5350 ethernet
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39233
John Crispin [Sun, 12 Jan 2014 12:07:15 +0000 (12:07 +0000)]
netifd: fix mac80211.sh to respect setting of mcast_rate
This patch fixes a bug in /lib/netifd/wireless/mac80211.sh, where
the UCI setting of wireless multicast traffic (in uci: mcast_rate)
is not respected within netifd. Especially in Freifunk mesh networks
the olsr routing as effected by this, as only the lowest mcast_rate
was used, even when uci ncast_rate was set to something else.
In function mac80211_setup_adhoc() the value of mcast_rate is missing
in json_get_vars.
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
SVN-Revision: 39232
John Crispin [Sun, 12 Jan 2014 12:07:11 +0000 (12:07 +0000)]
hostapd: fix frequency setting for IBSS/RSN
Introduced by ("netifd: add wireless configuration support and port mac80211 to
the new framework")
Reported-by: René van Weert <rene@sowifi.com>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
SVN-Revision: 39231
John Crispin [Sun, 12 Jan 2014 12:07:07 +0000 (12:07 +0000)]
lantiq: improve Arcadyan ARV4510PW support
Arcadyan ARV4510PW has already a build profile in OpenWrt, but it is
severely lacking. This patch brings it up-to-date.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 39230
John Crispin [Sun, 12 Jan 2014 12:07:01 +0000 (12:07 +0000)]
swconfig: improve usability when switch device incorrect
http://patchwork.openwrt.org/patch/4701/
Signed-off-by: Andreas Mohr <andim2@users.sf.net>
SVN-Revision: 39229
John Crispin [Sun, 12 Jan 2014 12:06:57 +0000 (12:06 +0000)]
libjson-c: also install .pc file for compatibility libjson
Older packages, which did not follow the renaming yet, do not
find the library otherwise via pkgconfig.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 39228
John Crispin [Sun, 12 Jan 2014 12:06:53 +0000 (12:06 +0000)]
samba: add browsable option
https://dev.openwrt.org/ticket/14682
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39227
John Crispin [Sun, 12 Jan 2014 12:06:47 +0000 (12:06 +0000)]
lantiq: fix atm compile
https://dev.openwrt.org/ticket/14633
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39226
John Crispin [Sun, 12 Jan 2014 12:06:39 +0000 (12:06 +0000)]
add git-src to .gitignore
Signed-off-by: Daniel Golle <daniel.golle@gmail.com>
SVN-Revision: 39225
Jo-Philipp Wich [Sun, 12 Jan 2014 11:52:40 +0000 (11:52 +0000)]
rpcd: build, uci and session api fixes
- fix CMakeFile to support rpcd out of tree builds
- fix a possible file descriptor leak in the session deserialization code
- add uci.state call which is equivalent to uci -P /var/state get ...
- make uci.changes "config" argument optional to allow listing all deltas in one go
- fix inverted check in uci.commit and uci.revert, resulting in eroorneous permission denied responses
- only trigger config change events if libuci was able to parse the config
- rename misleading "commit" argument of uci.apply to the more appropriate name "rollback"
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 39224
Zoltan Herpai [Sat, 11 Jan 2014 21:58:29 +0000 (21:58 +0000)]
sunxi: various changes - let LBDAF be set by generic config - add high-speed timer support - refresh sun5i USB patch
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39223
Zoltan Herpai [Sat, 11 Jan 2014 17:19:04 +0000 (17:19 +0000)]
sunxi: add support for Olinuxino A10 LIME
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39222
Zoltan Herpai [Sat, 11 Jan 2014 17:17:17 +0000 (17:17 +0000)]
uboot-sunxi: add support for Olinuxino A10 LIME
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39221
Gabor Juhos [Sat, 11 Jan 2014 16:06:37 +0000 (16:06 +0000)]
kernel: update 3.10 to 3.10.26
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39220
Gabor Juhos [Sat, 11 Jan 2014 11:15:30 +0000 (11:15 +0000)]
ar71xx: ag71xx: increase calculated max frame length value
The r39147 commit introduces a regression: at lease on some routers
with ar8216 switch large packets get lost if 802.1q tagged port is
used on the interface connected to the aforementioned switch.
The r39147 changes code in the way so interface is set to accept
packets no longer than max ethernet frame length for a given mtu.
Unfortunately ar8216 has a feature: it sends two additional bytes
as a packet header and those this header needs to be added to the
max frame length. Otherwise long enough packets get lost.
The problem only manuifests itself if interface is used in vlan
tagged mode. If interface is untagged then ar8216's header fits
into space used by 802.1q tag and not packets are lost.
Include two additional bytes in the max frame length calculation
to fix the issue.
This patch is tested and works with Trendnet TEW-632BRP.
Signed-off-by Nikolay Martynov <mar.kolya@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4656/
[juhosg:
- simplify the patch to include the additional bytes of the
switch header unconditionally,
- change subject and update commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39219
Zoltan Herpai [Fri, 10 Jan 2014 10:47:41 +0000 (10:47 +0000)]
sunxi: add/refresh patches for cubieboard2
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39218
Gabor Juhos [Fri, 10 Jan 2014 09:37:59 +0000 (09:37 +0000)]
ar71xx: my net n750: simplify LNA GPIO setup
Use the ath79_wmac_set_ext_lna_gpio helper instead
of exporting the GPIOs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39217
Gabor Juhos [Fri, 10 Jan 2014 09:37:58 +0000 (09:37 +0000)]
ar71xx: my net n600: simplify LNA GPIO setup
Use the ath79_wmac_set_ext_lna_gpio helper instead
of exporting the GPIOs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39216
Gabor Juhos [Fri, 10 Jan 2014 09:37:57 +0000 (09:37 +0000)]
ar71xx: add a helper function for external LNA GPIO setup
The built-in wireless MAC of the AR934x SoC can handle
external LNAs and the control signal of the LNAs can be
routed to any GPIO line. Add a helper function which
can be used to configure the GPIO lines.
The helper function will be used for AR934x boards
which are using externel LNAs to improve sensitivity.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39215
Gabor Juhos [Fri, 10 Jan 2014 09:07:12 +0000 (09:07 +0000)]
ar71xx: Fix WD My Net N600 weak signal issue
The LNAs need to be enabled by setting their respective GPIO to high even
though the original firmware's setting sets them to low on initialization.
Obviously the LNAs are then later initialized by the driver on the OEM
firmware. Without this fix the device is mostly "deaf".
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Tested-by: Steven Haigh <netwiz@crc.id.au>
Patchwork: http://patchwork.openwrt.org/patch/4689/
[juhosg:
- remove the GPIO LED changes, the My Net N600 has no yellow LEDs at all,
- change subject and update the commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39214
Gabor Juhos [Fri, 10 Jan 2014 09:07:11 +0000 (09:07 +0000)]
ar71xx: Fix WD My Net N750 weak signal issue
The LNAs need to be enabled by setting their respective GPIO to high even
though the original firmware's setting sets them to low on initialization.
Obviously the LNAs are then later initialized by the driver on the OEM
firmware. Without this fix the device is mostly "deaf".
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/4688/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39213
Gabor Juhos [Fri, 10 Jan 2014 09:05:31 +0000 (09:05 +0000)]
ath9k: add workaround for AR9331 USB host controller hang with USB1.1 devices
When wifi radio is reset, some bits in (undocumented) USB registers may
flip. Patch adds setting them after radio reset (channel change, up/down).
With this patch stability of USB1.1 full-speed devices, connected directly
to AR9331 host port (no USB2.0 hub) is improved.
See "ar9331's usb stability issue" OpenWrt forum thread for details:
<https://forum.openwrt.org/viewtopic.php?id=39956>
Based on QCA's Open HAL WAR_USB_DISABLE_PLL_LOCK_DETECT() macro:
<https://github.com/qca/qcamain_open_hal_public/blob/master/hal/ar9300/ar9300_reset.c#L74>
Adapted to Linux mac80211 driver for 8Devices Carambola2 board by Mantas Pucka:
<https://github.com/8devices/carambola2/commit/
b08b59ceb4e7f0bad4c0b17e703e1e5c4e168923>
Ported to latest OpenWrt BB branch and tested on TP-Link TL-WR703N by
Michel Stempin <michel.stempin@wanadoo.fr>.
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
[juhosg: refresh and clean up the ath9k patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39212
Jo-Philipp Wich [Wed, 8 Jan 2014 22:01:55 +0000 (22:01 +0000)]
jsonpath: make output in non-export mode more shell friendly
SVN-Revision: 39211
Imre Kaloz [Tue, 7 Jan 2014 15:03:55 +0000 (15:03 +0000)]
upgrade the Linaro binutils to 2.24-2013.12
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39210
Imre Kaloz [Tue, 7 Jan 2014 15:00:33 +0000 (15:00 +0000)]
upgrade Linaro GCC 4.8 to 4.8-2013.12
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39209
Imre Kaloz [Tue, 7 Jan 2014 12:23:35 +0000 (12:23 +0000)]
add x86_64 target support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39208
Imre Kaloz [Tue, 7 Jan 2014 10:21:31 +0000 (10:21 +0000)]
virtualbox emulates the e1000 for a long time now
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39207
Imre Kaloz [Tue, 7 Jan 2014 10:18:55 +0000 (10:18 +0000)]
move most of the x86 image generation options to the main file
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39206
Zoltan Herpai [Mon, 6 Jan 2014 23:34:31 +0000 (23:34 +0000)]
sunxi: refresh usb vbus patch
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39205
Zoltan Herpai [Mon, 6 Jan 2014 21:51:39 +0000 (21:51 +0000)]
sunxi: various fixes - DT: update USB vbus from 3.3v to 5v - emac: add missing free_irq - DT: add emac aliases - DT: fix interrupts on A20 - modules: add watchdog module - don't compile in mac80211 - don't compile in usbnet
Thanks to Hans de Goede, Zalan Blenessy et al.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39204
Hauke Mehrtens [Sat, 4 Jan 2014 23:46:44 +0000 (23:46 +0000)]
bcm53xx: make the l2x0 L2 cache controller work
This fixes the DMA problems with the Ethernet driver.
This also updates some other parts of the patches.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39203
Hauke Mehrtens [Sat, 4 Jan 2014 18:27:09 +0000 (18:27 +0000)]
bcm53xx: update the ethernet core hacks
The PHY always says there is no link
Instead of doing this dma sync a mdelay does the same trick and it is as unreliable.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39202
Hauke Mehrtens [Sat, 4 Jan 2014 18:25:05 +0000 (18:25 +0000)]
kernel: bgmac: update the driver patches to a version submitted for mainline kernel.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39201
Zoltan Herpai [Sat, 4 Jan 2014 17:33:44 +0000 (17:33 +0000)]
sunxi: emac changes - move emac into module - add into profiles where appropriate
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39200
Zoltan Herpai [Sat, 4 Jan 2014 16:39:31 +0000 (16:39 +0000)]
sunxi: add sata driver to profiles where appropriate
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39198
Zoltan Herpai [Sat, 4 Jan 2014 16:30:56 +0000 (16:30 +0000)]
sunxi: add sata driver for sun[47]i
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39197
Zoltan Herpai [Sat, 4 Jan 2014 13:46:43 +0000 (13:46 +0000)]
sunxi: move sunxi-sid (security ID) off to module
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39196
Zoltan Herpai [Sat, 4 Jan 2014 12:47:51 +0000 (12:47 +0000)]
sunxi: move rtc off to module
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39195
Zoltan Herpai [Sat, 4 Jan 2014 11:08:27 +0000 (11:08 +0000)]
sunxi: add the actual mmc driver
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39194
Zoltan Herpai [Sat, 4 Jan 2014 11:02:16 +0000 (11:02 +0000)]
sunxi: delete a31 reset for now in lack of the mach split
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39193
Zoltan Herpai [Sat, 4 Jan 2014 10:09:52 +0000 (10:09 +0000)]
add support for pcDuino board
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39192
Zoltan Herpai [Sat, 4 Jan 2014 10:08:31 +0000 (10:08 +0000)]
update version
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39191
Zoltan Herpai [Sat, 4 Jan 2014 10:06:17 +0000 (10:06 +0000)]
sunxi: add support for pcDuino board
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39190
Zoltan Herpai [Sat, 4 Jan 2014 10:02:01 +0000 (10:02 +0000)]
sunxi: add mmc support - add MMC support for sun457i - update kernel config to compile in MMC and ext4 - update kernel cmdline
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39189
Zoltan Herpai [Sat, 4 Jan 2014 09:55:41 +0000 (09:55 +0000)]
sunxi: various fixes - have Kconfig options ordered - add new olinuxino a13-micro board - various fixes for EHCI
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39188
Zoltan Herpai [Sat, 4 Jan 2014 09:49:44 +0000 (09:49 +0000)]
sunxi: remove sun6i/7i split for now
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39187
Zoltan Herpai [Sat, 4 Jan 2014 09:47:50 +0000 (09:47 +0000)]
sunxi: refresh clock framework
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39186
Jo-Philipp Wich [Thu, 2 Jan 2014 11:55:16 +0000 (11:55 +0000)]
Add jsonpath - a command line utility to extract values from JSON data using XPath-like expressions
SVN-Revision: 39185
Steven Barth [Thu, 2 Jan 2014 11:38:36 +0000 (11:38 +0000)]
6relayd: try to workaround race condition at startup
SVN-Revision: 39184
Felix Fietkau [Tue, 31 Dec 2013 13:09:20 +0000 (13:09 +0000)]
netifd: initialize the switch early at start time and on reload (fixes #13015)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39183
Luka Perkov [Mon, 30 Dec 2013 23:49:25 +0000 (23:49 +0000)]
ixp4xx: upgrade: don't copy extra binaries
hexdump is already added to new temporary file system while less is not used at
all. While at it, remove some trailing whitespaces.
Signed-off-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39181
Felix Fietkau [Sun, 29 Dec 2013 02:26:34 +0000 (02:26 +0000)]
netifd: update to the latest version, fixes wireless related segfaults on arm
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39180
Felix Fietkau [Sat, 28 Dec 2013 15:06:14 +0000 (15:06 +0000)]
uClibc: Fix lookup with DNS search in multi-threaded application.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
SVN-Revision: 39179
Felix Fietkau [Sat, 28 Dec 2013 15:06:04 +0000 (15:06 +0000)]
uClibc: make res_init() thread safe
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
SVN-Revision: 39178
Felix Fietkau [Sat, 28 Dec 2013 15:05:56 +0000 (15:05 +0000)]
uClibc: Fix threaded use of res_ functions.
This patch moves res_init() back above #undef _res. It fixes dns resolving issue in OpenWrt
(uClibc related - OpenWrt ticket #11929). It is a backport from uClibc master.
Further details are there:
http://git.uclibc.org/uClibc/commit/libc/inet/resolv.c?id=
20b69920b299585265eb100d0b67e1097ccb1092
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
SVN-Revision: 39177
Felix Fietkau [Sat, 28 Dec 2013 14:19:54 +0000 (14:19 +0000)]
netifd: update to the latest version, fixes wifi related segfaults
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39176
Felix Fietkau [Sat, 28 Dec 2013 11:07:37 +0000 (11:07 +0000)]
hostapd: fix mixed wep/wpa with netifd
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
SVN-Revision: 39174
Felix Fietkau [Sat, 28 Dec 2013 11:07:28 +0000 (11:07 +0000)]
hostapd: fix the uci option name for ap isolate
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39173
John Crispin [Fri, 27 Dec 2013 21:15:31 +0000 (21:15 +0000)]
firmware-utils: check_magic() in buffalo-lib.c always return 0
spotted with cppcheck
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 39171
John Crispin [Fri, 27 Dec 2013 21:15:20 +0000 (21:15 +0000)]
swconfig: remove useless variables, return -1 on errors
spotted with cppcheck
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 39170
John Crispin [Fri, 27 Dec 2013 21:15:09 +0000 (21:15 +0000)]
base-files: fix mount-utils incompatibility
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
SVN-Revision: 39169
John Crispin [Fri, 27 Dec 2013 21:14:49 +0000 (21:14 +0000)]
ralink: fix tso regression in the ethernet driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39168
Hauke Mehrtens [Thu, 26 Dec 2013 23:30:10 +0000 (23:30 +0000)]
brcm47xx: fix cpu wait for BCM4706
This was called to early.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39167
Hauke Mehrtens [Thu, 26 Dec 2013 23:27:52 +0000 (23:27 +0000)]
brcm47xx: b44: This updates the phylib patches to the version send upstream
This uses a fixed phy instead of a dummy one.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39166
Hauke Mehrtens [Thu, 26 Dec 2013 23:22:31 +0000 (23:22 +0000)]
kernel: bgmac: update patches
This updates the bgmac backport patch to the current upstream version
and adds some more patches mostly for BCM4707.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39165
Imre Kaloz [Thu, 26 Dec 2013 22:19:29 +0000 (22:19 +0000)]
handle the Linaro version as well
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39164
John Crispin [Wed, 25 Dec 2013 17:04:50 +0000 (17:04 +0000)]
ramips: add support for RT-N14U (mt7620n based) board
added dts file and userspace scripts modified to support Asus RT-N14U board
current support status:
usb works
ethernet works
buttons reset, wps
leds asus:blue:[usb|lan|wan|air|power]
i2c not tested
uart not tested
wifi not yet
Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>
SVN-Revision: 39163
projects / openwrt / staging / pepe2k.git / log