Imre Kaloz [Fri, 31 Jul 2015 18:08:12 +0000 (18:08 +0000)]
mvebu: fix gpio config on the WRT1200AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46527
Zoltan Herpai [Fri, 31 Jul 2015 12:25:35 +0000 (12:25 +0000)]
mxs: switch to 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46526
Zoltan Herpai [Fri, 31 Jul 2015 12:22:12 +0000 (12:22 +0000)]
mxs: add support for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46525
Zoltan Herpai [Fri, 31 Jul 2015 11:58:24 +0000 (11:58 +0000)]
mxs: build sound-soc-mxs only on 3.18 for now
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46524
Zoltan Herpai [Fri, 31 Jul 2015 11:52:48 +0000 (11:52 +0000)]
packages: uboot-mxs: bump to 2015.07, refresh Duckbill patch
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46523
Steven Barth [Thu, 30 Jul 2015 08:53:43 +0000 (08:53 +0000)]
dnsmasq: Bump to dnsmasq2.74
Bump to dnsmasq2.74 & refresh patches to fix fuzz
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
SVN-Revision: 46522
Imre Kaloz [Thu, 30 Jul 2015 06:41:25 +0000 (06:41 +0000)]
mwlwifi: upgrade to latest rev with fixed firmware
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46520
Felix Fietkau [Wed, 29 Jul 2015 16:01:55 +0000 (16:01 +0000)]
mt76: update to the latest version, fixes more tx power related issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46519
Steven Barth [Wed, 29 Jul 2015 06:13:15 +0000 (06:13 +0000)]
odhcp6c: minor fixes
Better synchronize RA & DHCPv6 events
Accumulate some events to avoid flooding
Restart softwires for address and prefix changes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46518
Luka Perkov [Tue, 28 Jul 2015 21:54:44 +0000 (21:54 +0000)]
openssl: add one more mirror
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 46517
Jo-Philipp Wich [Mon, 27 Jul 2015 23:45:15 +0000 (23:45 +0000)]
sdk: provide explicit CONFIG_MODULES kconfig symbol
Extend the SDK Config.in file to explicitely declare a MODULES symbol with
the "option modules" flag set in order to prevent a kconfig segmentation fault
whenever a "depends m" dependency is encountered.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46514
Felix Fietkau [Mon, 27 Jul 2015 18:46:42 +0000 (18:46 +0000)]
mt76: update to the latest version, fixes some compile errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46513
Steven Barth [Mon, 27 Jul 2015 11:47:20 +0000 (11:47 +0000)]
firewall: fix typo in ESP rule
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46506
Hauke Mehrtens [Sun, 26 Jul 2015 15:53:44 +0000 (15:53 +0000)]
oprofile: update to 1.1.0-rc2 and make it work with musl
This brings oprifle to version 1.1.0-rc2 and adds some fixes for musl.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46505
Hauke Mehrtens [Sun, 26 Jul 2015 15:52:59 +0000 (15:52 +0000)]
bcm53xx: update Disable MMU and Dcache during decompression
This replaces the old patch with the version from Florian.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46504
Hauke Mehrtens [Sun, 26 Jul 2015 15:52:34 +0000 (15:52 +0000)]
kernel: add missing CONFIG_ARM_CCI400_PMU config option
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46503
Hauke Mehrtens [Sun, 26 Jul 2015 15:52:17 +0000 (15:52 +0000)]
gpio-button-hotplug: handle EPROBE_DEFER and other errors
of_get_gpio_flags() could return an error like EPROBE_DEFER which was
not handled before. This patch takes the code from gpio_keys_polled.c
for error handling and also improves some other unrelated small parts.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46502
Hauke Mehrtens [Sun, 26 Jul 2015 15:51:59 +0000 (15:51 +0000)]
kernel: add CONFIG_REGMAP_MMIO config option
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46501
Hauke Mehrtens [Sun, 26 Jul 2015 15:51:37 +0000 (15:51 +0000)]
bcm53xx: update config
This activates CONFIG_MULTIUSER and sets the maximal number of cpus to 2.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46500
Felix Fietkau [Sun, 26 Jul 2015 13:01:43 +0000 (13:01 +0000)]
ramips: swap radio calibration data pointers for DIR-860L
Fixes low 5 GHz tx power issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46497
Felix Fietkau [Sun, 26 Jul 2015 11:42:27 +0000 (11:42 +0000)]
image: fix device variable exports for initramfs images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46496
Hauke Mehrtens [Sun, 26 Jul 2015 09:16:03 +0000 (09:16 +0000)]
kernel: add kmod-lp again
This was deactivated in r21954 because it depended on kernel 2.4, but
this module also compiles with kernel 3.18.
This closes #20199.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46495
Hauke Mehrtens [Sat, 25 Jul 2015 13:41:21 +0000 (13:41 +0000)]
kernel: cdc_ncm: Add support for moving NDP to end of NCM frame
This patch was missing for kernel 4.0 and 4.1 in r46464. I also
replaced the version in OpenWrt with the version which went upstream
into the Linux mainline kernel.
This closes #20193 and #20192
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46493
Hauke Mehrtens [Sat, 25 Jul 2015 13:40:43 +0000 (13:40 +0000)]
mac80211: do not add debugfs_create_devm_seqfile() on recent kernel versions
An #ifdef for the kernel version was missing around the header of
debugfs_create_devm_seqfile() and the LINUX_BACKPORT() was also not
done.
This closes #20181
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46492
Jonas Gorski [Sat, 25 Jul 2015 12:12:28 +0000 (12:12 +0000)]
opkg: ensure image provided feeds are available after sysupgrade
Split the opkg.conf into three files, to make it easier to support custom
feeds and configs:
* /etc/opkg.conf -> base opkg configuration
* /etc/opkg/distfeeds.conf -> default Openwrt package feeds
* /etc/opkg/customfeeds.conf -> custom package feeds
Of these three, only the base opkg.conf and the customfeeds.conf is marked
as to be kept, so that the distfeeds.conf from the image is always used.
To ease migration, a script is added that moves any feeds from /etc/opkg.conf
to /etc/opkg/customfeeds.conf on first boot.
Also ensure that any keys used for verification are also kept in upgrade.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46491
Jonas Gorski [Sat, 25 Jul 2015 12:12:11 +0000 (12:12 +0000)]
brcm63xx: switch to new image building system
Switches BCM63xx to the new IB system.
Images are generated per device definitions.
There are no changes in the produced images except for some name changes,
caused by the new IB system.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46490
Jonas Gorski [Sat, 25 Jul 2015 12:12:06 +0000 (12:12 +0000)]
brcm63xx: use new tool for generating redboot images
Simplify image/Makefile by using the new perl script for RedBoot.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46489
Jonas Gorski [Sat, 25 Jul 2015 12:12:03 +0000 (12:12 +0000)]
scripts: add tool for generating redboot scripts
This tool avoids generating the redboot script directly from Makefile, which
can get really complicated when adapting image/Makefile to the new IB system.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46488
Jonas Gorski [Sat, 25 Jul 2015 09:55:32 +0000 (09:55 +0000)]
kmod-regmap: make regmap-mmio user selectable
REGMAP_MMIO is a hidden symbol, so it cannot be directly selected. If nothing
selects it, it will fail the build with:
ERROR: module '/store/buildbot/slave/slave/rb532/build/build_dir/target-mipsel_mips32_musl-1.1.10/linux-rb532/linux-3.18.19/drivers/base/regmap/regmap-mmio.ko' is missing.
make[2]: *** [/store/buildbot/slave/slave/rb532/build/bin/rb532/packages/base/kmod-regmap_3.18.19-1_rb532.ipk] Error 1
Fix this by adding a description to allow selecting it manually.
Fixes: r46451 ("kmod-regmap: enable MMIO support")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46485
Steven Barth [Fri, 24 Jul 2015 22:26:44 +0000 (22:26 +0000)]
mbedtls: package version 2.0, make polarssl compatible
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46484
Felix Fietkau [Fri, 24 Jul 2015 15:36:08 +0000 (15:36 +0000)]
kernel: remove kmod-crypto-aes, AES crypto support is always built into the kernel
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46483
Felix Fietkau [Fri, 24 Jul 2015 15:36:02 +0000 (15:36 +0000)]
kernel: fix oprofile performance counter interrupt handling on mips
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46482
Felix Fietkau [Fri, 24 Jul 2015 15:35:55 +0000 (15:35 +0000)]
musl: update to latest git version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46481
Steven Barth [Fri, 24 Jul 2015 13:51:45 +0000 (13:51 +0000)]
fortify-headers: update to 0.7
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46480
Steven Barth [Fri, 24 Jul 2015 13:51:43 +0000 (13:51 +0000)]
odhcpd: fix RA lifetimes
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46479
Steven Barth [Fri, 24 Jul 2015 10:00:45 +0000 (10:00 +0000)]
firewall: comply with REC-22, REC-24 of RFC 6092
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46478
John Crispin [Fri, 24 Jul 2015 09:12:21 +0000 (09:12 +0000)]
ramips: add additional uarts to mt7628.dtsi
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46477
John Crispin [Fri, 24 Jul 2015 09:12:16 +0000 (09:12 +0000)]
ramips: make sd driver depend on mt7688
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46476
John Crispin [Fri, 24 Jul 2015 09:12:10 +0000 (09:12 +0000)]
ramips: add CD polling to sd driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46475
John Crispin [Fri, 24 Jul 2015 09:12:02 +0000 (09:12 +0000)]
ramips: various mt7688 pinmux fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46474
John Crispin [Fri, 24 Jul 2015 09:11:56 +0000 (09:11 +0000)]
ramips: add subtarget for mt7688
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46473
John Crispin [Fri, 24 Jul 2015 09:11:42 +0000 (09:11 +0000)]
ramips: add clock strecthing support to i2c driver
fixes #19816
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46472
John Crispin [Fri, 24 Jul 2015 09:11:35 +0000 (09:11 +0000)]
buttons: make all button handler scripts return 0
this is required by the new button timeout feature
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46471
John Crispin [Fri, 24 Jul 2015 09:11:29 +0000 (09:11 +0000)]
bzip2: add host build
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46470
John Crispin [Fri, 24 Jul 2015 09:11:24 +0000 (09:11 +0000)]
firmware-utils mktplinkfw: print amount of exceeding bytes
This is very useful for trimming images towards 4 MiB flash size.
Signed-off-by: Stephan Maka <stephan@spaceboyz.net>
SVN-Revision: 46469
John Crispin [Fri, 24 Jul 2015 09:11:17 +0000 (09:11 +0000)]
mac80211: Clarify ath9k & ath10k debug selection
Ath debug mode applies to ath10k as well as ath9k.
Update Makefile help text to clarify.
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
SVN-Revision: 46468
John Crispin [Fri, 24 Jul 2015 09:11:06 +0000 (09:11 +0000)]
dnsmasq: add some missing files to the jail
found with strace, not sure we got all of them though
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
SVN-Revision: 46467
John Crispin [Fri, 24 Jul 2015 09:11:00 +0000 (09:11 +0000)]
base-files: fix /tmp/.jail permissions
We need a+x rights on the path to the root of the jails
so we can use users other than root (like nobody)
This partly fixes jailed dnsmasq
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
SVN-Revision: 46466
John Crispin [Fri, 24 Jul 2015 09:10:55 +0000 (09:10 +0000)]
procd: update to latest git HEAD
fixes http://patchwork.ozlabs.org/patch/497899/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46465
John Crispin [Fri, 24 Jul 2015 09:10:47 +0000 (09:10 +0000)]
generic: cdc_ncm: Add support for moving NDP to end of NCM frame
NCM specs are not actually mandating a specific position in the frame for
the NDP (Network Datagram Pointer). However, some Huawei devices will
ignore our aggregates if it is not placed after the datagrams it points
to. Add support for doing just this, in a per-device configurable way.
While at it, update NCM subdrivers, disabling this functionality in all of
them, except in huawei_cdc_ncm where it is enabled instead.
We aren't making any distinction between different Huawei NCM devices,
based on what the vendor driver does. Standard NCM devices are left
unaffected: if they are compliant, they should be always usable, still
stay on the safe side.
This change has been tested and working with a Huawei E3131 device (which
works regardless of NDP position) and an E3372 device (which mandates NDP
to be after indexed datagrams).
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 46464
John Crispin [Fri, 24 Jul 2015 09:10:41 +0000 (09:10 +0000)]
generic: Add missing symbols when tracing is enabled
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46463
John Crispin [Fri, 24 Jul 2015 09:10:19 +0000 (09:10 +0000)]
generic: add missing symbol
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46462
John Crispin [Fri, 24 Jul 2015 09:10:14 +0000 (09:10 +0000)]
brcm2708: add kmod-sound-soc-bcm2708-i2s support
This adds support for I2S SoC Audio modules.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46461
John Crispin [Fri, 24 Jul 2015 09:10:05 +0000 (09:10 +0000)]
brcm2708: add kmod-video-bcm2835 support
This adds BCM2835 camera interface driver as a kernel module.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46460
John Crispin [Fri, 24 Jul 2015 09:10:00 +0000 (09:10 +0000)]
ar71xx: Allow to use ath79_gpio_output_select on QCA955x
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46459
John Crispin [Fri, 24 Jul 2015 09:09:49 +0000 (09:09 +0000)]
ar71xx: add support for Onion Omega
This patch adds support for the Onion Omega.
https://onion.io/omega
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: Boken Lin <bl@onion.io>
Tested-by: Jacky Huang <huangfangcheng@163.com>
SVN-Revision: 46458
John Crispin [Fri, 24 Jul 2015 09:09:42 +0000 (09:09 +0000)]
ar71xx: Add support for AP147-010 reference board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46457
John Crispin [Fri, 24 Jul 2015 09:09:31 +0000 (09:09 +0000)]
ar71xx: Add support for PCIe on QCA953x
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46456
John Crispin [Fri, 24 Jul 2015 09:09:27 +0000 (09:09 +0000)]
ar71xx: fix wndr3700_board_detect for some NETGEAR WNDR3700v2
There are a few NETGEAR devices which don't terminate the model name in the
ART with a NUL byte, at least some NETGEAR WNDR3700v2. The current awk
expression doesn't match 0xFF bytes, so AR71XX_MODEL contains lots of
trailing 0xFF garbage in this case.
Fix this by matching for the first non-printable character and explicitly
setting LC_CTYPE=C (probably not strictly necessary on OpenWrt, but will
definitely work like this, even when awk supports locales and LANG is set).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46455
John Crispin [Fri, 24 Jul 2015 09:09:22 +0000 (09:09 +0000)]
ramips: add support for STORYLiNK SAP-G3200U3
STORYLiNK SAP-G3200U3 is an AC1200 router based on MT7621AT+MT7602EN+MT7612EN.
It has 128MB DDR3, 8MB NOR FLASH, 5-port Gbps switch and 1x USB 3.0.
The following patch adds support for this device.
Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons
* ethernet switch and USB diag LEDs
* UART
* GPIOs
Tested and not working:
* LEDs for WiFi radios (connected with WiFi chips, not supported in mt76?)
* failsafe mode (known problem, needs workaround like other MTK based devices)
More information in Wiki: http://wiki.openwrt.org/toh/storylink/sap-g3200u3
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
SVN-Revision: 46454
John Crispin [Fri, 24 Jul 2015 09:09:07 +0000 (09:09 +0000)]
lantiq: Silence the PCIe error interrupt printk also in 4.1
This ports
9e2a7b779e6f0914395da3657b00f0ac00209bfd to the 4.1 patches.
I forgot this when preparing the initial 4.1 patch.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46453
John Crispin [Fri, 24 Jul 2015 09:09:02 +0000 (09:09 +0000)]
lantiq: Fix ifxos driver on linux 4.1
request_mem_region returns NULL when requesting the region failed, and
a valid pointer when it was successful. Currently the condition is
inverted.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46452
John Crispin [Fri, 24 Jul 2015 09:08:57 +0000 (09:08 +0000)]
kmod-regmap: enable MMIO support
This adds MMIO support for kmod-regmap.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46451
Jonas Gorski [Wed, 22 Jul 2015 12:51:11 +0000 (12:51 +0000)]
kernel: refresh patches for 4.1
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46441
Jonas Gorski [Wed, 22 Jul 2015 12:51:04 +0000 (12:51 +0000)]
kernel: update 4.0 to 4.0.9
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.9
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46440
Jonas Gorski [Wed, 22 Jul 2015 12:50:59 +0000 (12:50 +0000)]
kernel: update 3.18 to 3.18.19
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.19
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46439
Felix Fietkau [Wed, 22 Jul 2015 12:45:12 +0000 (12:45 +0000)]
ar71xx: refresh kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46438
Felix Fietkau [Wed, 22 Jul 2015 12:45:07 +0000 (12:45 +0000)]
kernel: update to linux 4.1.3
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46437
Felix Fietkau [Wed, 22 Jul 2015 12:45:03 +0000 (12:45 +0000)]
mac80211: update to wireless-testing 2015-07-21
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46436
Felix Fietkau [Wed, 22 Jul 2015 12:44:55 +0000 (12:44 +0000)]
generic: add more missing linux 4.1 symbols
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 46435
Felix Fietkau [Mon, 20 Jul 2015 10:50:46 +0000 (10:50 +0000)]
tools: drop circular dependency between patch and ccache, build patch without ccache (fixes #20132)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46434
Felix Fietkau [Mon, 20 Jul 2015 06:01:18 +0000 (06:01 +0000)]
ar71xx: remove the use of the obsolete IRQF_DISABLED flag in the NAND flash driver (fixes #20125)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46433
Felix Fietkau [Sun, 19 Jul 2015 17:59:20 +0000 (17:59 +0000)]
ar71xx: switch to linux 4.1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46432
Felix Fietkau [Sun, 19 Jul 2015 17:59:15 +0000 (17:59 +0000)]
ar71xx: add missing patch chunk to 4.1 unaligned access hacks
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46431
Felix Fietkau [Sun, 19 Jul 2015 17:59:08 +0000 (17:59 +0000)]
ar71xx: reorganize 4.1 patch directory layout
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46430
Felix Fietkau [Sun, 19 Jul 2015 17:59:00 +0000 (17:59 +0000)]
ar71xx: refresh kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46429
Felix Fietkau [Sun, 19 Jul 2015 17:58:53 +0000 (17:58 +0000)]
kernel: add missing config symbols for 4.1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46428
Felix Fietkau [Sun, 19 Jul 2015 17:58:46 +0000 (17:58 +0000)]
ar71xx: refresh 4.1 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46427
Felix Fietkau [Sun, 19 Jul 2015 17:58:40 +0000 (17:58 +0000)]
ar71xx: add 4.1 support
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 46426
Felix Fietkau [Sun, 19 Jul 2015 17:58:27 +0000 (17:58 +0000)]
Revert "ar71xx: Add support for Cisco-Linksys WAP4410N" (r46250)
The commit is incomplete, it does not even build the mach-* file
This reverts commit
6e6adcf7a197b1802cb728ddcccf05f890ca0574
SVN-Revision: 46425
Felix Fietkau [Sun, 19 Jul 2015 14:59:26 +0000 (14:59 +0000)]
mkimage: cross compile fix: pass HOST_*FLAGS in to uboot's makefile
The HOST_*FLAGS are for compiling programs which will run on the machine that is
running the build. Setting these flags is frequently required for unusual
cross-compiles.
Signed-off-by: Lawrence D'Anna <larry@elder-gods.org>
SVN-Revision: 46424
Felix Fietkau [Sun, 19 Jul 2015 14:59:16 +0000 (14:59 +0000)]
strace: add kernel headers include to host cflags to fix build on non-linux systems
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46423
Felix Fietkau [Sun, 19 Jul 2015 14:59:09 +0000 (14:59 +0000)]
strace: cross compile fix: pass HOST_*FLAGS in to ./configure
The HOST_*FLAGS are for compiling programs which will run on the machine that is
running the build. Setting these flags is frequently required for unusual
cross-compiles.
Signed-off-by: Lawrence D'Anna <larry@elder-gods.org>
SVN-Revision: 46422
Felix Fietkau [Sat, 18 Jul 2015 23:14:19 +0000 (23:14 +0000)]
netifd: update to the latest version, fixes setting RPS/XPS for wlan devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46421
Felix Fietkau [Sat, 18 Jul 2015 22:49:39 +0000 (22:49 +0000)]
kernel: fix sched_getaffinity on MIPS SMP systems (fixes enabling RPS/XPS in netifd with musl)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46420
John Crispin [Sat, 18 Jul 2015 21:15:42 +0000 (21:15 +0000)]
ar71xx: Enable ath10k calibration data loading for EnGenius ESR1750 and EPG500.
As r46245 disabled the board.bin template workaround, 5GHz wifi stopped working
on these devices. This adds them to the calibration data loading introduced in
r46244 and thus makes 5GHz work again for these devices.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
SVN-Revision: 46415
John Crispin [Sat, 18 Jul 2015 21:15:36 +0000 (21:15 +0000)]
ar71xx: use automatic firmware partition splitting for devolo dLAN devices
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
SVN-Revision: 46414
Felix Fietkau [Sat, 18 Jul 2015 19:10:38 +0000 (19:10 +0000)]
cfg80211: fix a locking issue (#20098)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46413
Felix Fietkau [Sat, 18 Jul 2015 16:47:05 +0000 (16:47 +0000)]
ramips: enable mt76 by default for mt7621
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46410
Felix Fietkau [Sat, 18 Jul 2015 16:04:58 +0000 (16:04 +0000)]
mt76: update to the latest version, fixes rx buffer allocation issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46409
Steven Barth [Sat, 18 Jul 2015 05:44:50 +0000 (05:44 +0000)]
odhcp6c: add option "sourcefilter" to disable source filter
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46408
Hauke Mehrtens [Fri, 17 Jul 2015 17:55:17 +0000 (17:55 +0000)]
kernel: fix dependecy of kmod-ieee802154_6lowpan
This module also depends on kmod-ieee802154
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46407
John Crispin [Fri, 17 Jul 2015 12:51:24 +0000 (12:51 +0000)]
swconfig: libsw.so should be installed into /usr/lib/
otherwise it's not picked up by toolchain:
staging_dir/toolchain-mipsel_24kec+dsp_gcc-4.8-linaro_musl-1.1.10/lib/gcc/mipsel-openwrt-linux-musl/4.8.3/../../../../mipsel-openwrt-linux-musl/bin/ld: cannot find -lsw
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 46406
John Crispin [Fri, 17 Jul 2015 12:51:08 +0000 (12:51 +0000)]
ramips: add support for Planex MZK-DP150N
This patch add support for Planex MZK-DP150N.
a mini router on the MT7620A SoC with one Ethernet port and a 802.11n 2.4 GHz radio.
Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
SVN-Revision: 46405
John Crispin [Fri, 17 Jul 2015 12:50:52 +0000 (12:50 +0000)]
brcm2708: add gzip image compression
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46404
John Crispin [Fri, 17 Jul 2015 12:49:27 +0000 (12:49 +0000)]
brcm2708: add Raspberry Pi Compute Module support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46403
John Crispin [Fri, 17 Jul 2015 12:49:09 +0000 (12:49 +0000)]
brcm2708: switch to linux 4.1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46402
John Crispin [Fri, 17 Jul 2015 12:48:59 +0000 (12:48 +0000)]
brcm2708: add upstream (bcm2835) modules and improve downstream ones (bcm2708)
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46401
John Crispin [Fri, 17 Jul 2015 12:48:51 +0000 (12:48 +0000)]
generic: add missing linux 4.1 symbols
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46400
John Crispin [Fri, 17 Jul 2015 12:48:39 +0000 (12:48 +0000)]
brcm2708: add linux 4.1 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46399
projects / openwrt / staging / chunkeey.git / log