Hauke Mehrtens [Sat, 7 Jun 2014 17:00:53 +0000 (17:00 +0000)]
broadcom-wl: fix build with bcma or ssb deactivated
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41046
Felix Fietkau [Sat, 7 Jun 2014 16:14:47 +0000 (16:14 +0000)]
base-files: fix argument order to date in sysfixtime so that it also works with musl
Seems like the reverse order relies on GNU specific getopt hackery which
musl does not replicate
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41045
Felix Fietkau [Sat, 7 Jun 2014 16:14:43 +0000 (16:14 +0000)]
musl: update to version 1.1.2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41044
Hauke Mehrtens [Sat, 7 Jun 2014 15:42:33 +0000 (15:42 +0000)]
brcm47xx: mips74k: optimize kernel config
This saves abount 15 kB of compressed kernel size.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41043
Hauke Mehrtens [Sat, 7 Jun 2014 15:41:41 +0000 (15:41 +0000)]
bcm47xx: use eth0 for switch name
This fixes some strange problems with tg3. I assume that the Ethernet
driver was not brought up if the switch was named switch0.
This was reported and tested by ernesto (Faulp3lz).
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41042
Felix Fietkau [Sat, 7 Jun 2014 15:19:40 +0000 (15:19 +0000)]
brcm47xx: add a "legacy" subtarget that is usable for low-end 802.11g devices like WRT54G
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41041
Felix Fietkau [Sat, 7 Jun 2014 12:04:55 +0000 (12:04 +0000)]
mac80211: b43: fix B43_USE_SSB dependency
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 41040
Felix Fietkau [Sat, 7 Jun 2014 11:54:13 +0000 (11:54 +0000)]
procd: Fix USB cellular modems hotplug events
Without this patch, /etc/hotplug.d/tty/30-3g won't be called when you insert or remove a USB-serial cellular modem.
(see Ticket #14117)
Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
SVN-Revision: 41039
Steven Barth [Sat, 7 Jun 2014 10:35:34 +0000 (10:35 +0000)]
odhcpd: improve DHCPv4 range defaults
SVN-Revision: 41038
Felix Fietkau [Fri, 6 Jun 2014 16:24:21 +0000 (16:24 +0000)]
b43: fix ssb/bcma dependencies
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41037
Felix Fietkau [Fri, 6 Jun 2014 10:51:47 +0000 (10:51 +0000)]
binutils: decouple from toolchain selection, use version 2.24, fix libiberty installation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41036
Felix Fietkau [Fri, 6 Jun 2014 10:51:44 +0000 (10:51 +0000)]
oprofile: update to 0.9.9, fix compile error
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41035
Felix Fietkau [Fri, 6 Jun 2014 10:51:40 +0000 (10:51 +0000)]
toolchain/binutils: remove obsolete patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41034
John Crispin [Fri, 6 Jun 2014 09:34:47 +0000 (09:34 +0000)]
ubi-utils: bump to version 1.5.1 for ubiblock support
ubiblock allows creating and removing read-only block devices
on top of ubi volumes.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 41033
John Crispin [Fri, 6 Jun 2014 09:34:38 +0000 (09:34 +0000)]
igmpproxy: report an error and dont start the instance if one of the interfaces is not up
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41032
John Crispin [Fri, 6 Jun 2014 09:34:30 +0000 (09:34 +0000)]
procd: service instances can now report an error of why they failed to start.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41031
Felix Fietkau [Fri, 6 Jun 2014 09:20:15 +0000 (09:20 +0000)]
kernel: fix duplicate KERNEL_PERF_EVENTS with wrong dependency
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41030
Felix Fietkau [Thu, 5 Jun 2014 23:33:57 +0000 (23:33 +0000)]
ath9k: add a fix for rx overrun processing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41029
Felix Fietkau [Thu, 5 Jun 2014 23:33:54 +0000 (23:33 +0000)]
ath9k: add a fix for ANI related stability issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41028
Hauke Mehrtens [Thu, 5 Jun 2014 21:32:36 +0000 (21:32 +0000)]
openssl: version bump to 1.0.1h
today appeared another serious vulnerability in openssl. More info is
here http://ccsinjection.lepidum.co.jp. Users are advised to update to
openssl 1.0.1h.
Signed-off-by: Martin Strbacka <martin.strbacka@nic.cz>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41026
Hauke Mehrtens [Thu, 5 Jun 2014 21:25:03 +0000 (21:25 +0000)]
brcm47xx: add mips74k subtarget for newer devices
All new devices (with MIPS 74K CPU) are based on BCMA SoC and have
Ethernet core supported by bgmac. Create a new subtarget to generate
optimized builds.
This is just a beginning, further tweaks (like kernel configuration)
are still possible. This decreases default root.squashfs by ~128 kB.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41025
Hauke Mehrtens [Thu, 5 Jun 2014 21:23:58 +0000 (21:23 +0000)]
brcm47xx: move current target to "generic" subtarget
This allows creating more subtargets and optimize builds per family.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41024
Felix Fietkau [Thu, 5 Jun 2014 21:14:02 +0000 (21:14 +0000)]
hostapd: fix wpad-mini compile error (#16700)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41023
Felix Fietkau [Thu, 5 Jun 2014 15:58:01 +0000 (15:58 +0000)]
hostapd: update to 2014-06-03
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41022
Felix Fietkau [Thu, 5 Jun 2014 15:13:28 +0000 (15:13 +0000)]
ath9k: fix enabling PC-OEM card support (#16624)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41021
Felix Fietkau [Thu, 5 Jun 2014 14:55:14 +0000 (14:55 +0000)]
procd: update to the latest version, fixes a crash on early boot
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41020
Felix Fietkau [Thu, 5 Jun 2014 14:55:10 +0000 (14:55 +0000)]
wpa_supplicant: fix locking hostapd to 20MHz (#12720)
Fixed wpa_supplicant when the radio is in 40MHz mode so that it no
longer restarts hostapd with the second channel disabled.
Signed-off-by: Lance Chaney <furryfur1@gmail.com>
SVN-Revision: 41019
Felix Fietkau [Thu, 5 Jun 2014 14:55:07 +0000 (14:55 +0000)]
mac80211: merge a series of cleanups/fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41018
Felix Fietkau [Thu, 5 Jun 2014 14:55:03 +0000 (14:55 +0000)]
ath9k: merge a p2p powersave handling fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41017
Felix Fietkau [Thu, 5 Jun 2014 14:09:14 +0000 (14:09 +0000)]
rt2x00: merge beacon setup fixes, disable unused hw beacon slots
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41016
Felix Fietkau [Thu, 5 Jun 2014 13:51:15 +0000 (13:51 +0000)]
mac80211: b43: make support for SSB optional
Now we have a choice submenu, just like b43 in the mainline.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 41015
Felix Fietkau [Thu, 5 Jun 2014 13:51:11 +0000 (13:51 +0000)]
mac80211: b43: update BCM4716 patch to compile without SSB
B43_SSB is optional after recent upstream changes.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 41014
Felix Fietkau [Thu, 5 Jun 2014 13:51:08 +0000 (13:51 +0000)]
libubox: update to the latest version, adds static vlist initializer macros
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41013
Felix Fietkau [Thu, 5 Jun 2014 11:55:36 +0000 (11:55 +0000)]
hostapd: move reading of rsn_preauth out of auth_type=eap context
rsn_preauth is used outside of "case $auth_type", so if it is set
for an EAP-enabled SSID, it would also be set for the following
non-EAP-enabled SSIDs, because it would not be read again.
Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>
SVN-Revision: 41012
John Crispin [Thu, 5 Jun 2014 10:56:18 +0000 (10:56 +0000)]
igmpproxy: register interface change triggers
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41011
John Crispin [Thu, 5 Jun 2014 10:56:14 +0000 (10:56 +0000)]
netfid: make procd watch the network.interface object for events
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41010
John Crispin [Thu, 5 Jun 2014 10:56:10 +0000 (10:56 +0000)]
netifd: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41009
John Crispin [Thu, 5 Jun 2014 10:56:06 +0000 (10:56 +0000)]
procd: add wrapper calls for interface triggers
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41008
John Crispin [Thu, 5 Jun 2014 10:56:02 +0000 (10:56 +0000)]
procd: update to latest git head
adds support for ubus event based triggers
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41007
John Crispin [Thu, 5 Jun 2014 08:19:59 +0000 (08:19 +0000)]
procd: rename local variable in uci_validate_section
Allow to use "package", "type", "name", "error" and "result"
as config option names:
package some_service
config section 'foo'
option name 'bar'
option type 'unknown'
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
SVN-Revision: 41006
John Crispin [Thu, 5 Jun 2014 08:19:52 +0000 (08:19 +0000)]
lantiq: fix eep handling patch
0b79a4a66d17d2c7c12cde8d13637c1b0e5152c2 broke the patch
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41005
Luka Perkov [Wed, 4 Jun 2014 23:01:30 +0000 (23:01 +0000)]
imx6: kernel: update 3.14 pcie patches
Remove old irq map patch and replace it with the propper upstream patches
allowing IMX6 PCIe devices behind PCIe switches to work properly.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 41004
Steven Barth [Wed, 4 Jun 2014 14:58:40 +0000 (14:58 +0000)]
map: add support for map-t if available
SVN-Revision: 41003
Felix Fietkau [Wed, 4 Jun 2014 11:51:59 +0000 (11:51 +0000)]
hostapd: replace undefined $bridge with $network_bridge
Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>
SVN-Revision: 41002
Steven Barth [Wed, 4 Jun 2014 09:59:45 +0000 (09:59 +0000)]
dhcpv6: set default solicit timeout back to 120s
This deliberatly breaks RFC 7083 since its not really user-friendly.
SVN-Revision: 41001
John Crispin [Wed, 4 Jun 2014 07:20:31 +0000 (07:20 +0000)]
package: swconfig: let variable name be local
Let the first parameter of function config_get be local, because there
is a chance that config_get won't export the variable.
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
SVN-Revision: 41000
John Crispin [Wed, 4 Jun 2014 07:20:22 +0000 (07:20 +0000)]
lantiq: ath5k fix in wifi and ethernet eeprom handling patch.
ath5k fix in wifi and ethernet eeprom handling patch.
Without the line that adds the patch of_ath5k_eeprom_probe cause a
kernel panic, at least with the ARV4518PW.
Tested only in the modem-router mentioned above.
This patch is based in Bruno's hack present in patch #5454.
Signed off by: Bruno Rodríguez <bruno.rodriguez.1980@gmail.com>
Signed off by: José Vázquez Fernández <ppvazquezfer@gmail.com>
SVN-Revision: 40999
John Crispin [Wed, 4 Jun 2014 07:20:02 +0000 (07:20 +0000)]
libusb-compat: create directory for libusb-config
Fix a build regression caused by r39975 by making sure $(STAGING_DIR)/host
directory exists before trying to copy files to it.
Cc: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40998
John Crispin [Wed, 4 Jun 2014 07:19:51 +0000 (07:19 +0000)]
igmpproxy: update init.d script to procd and add a hotplug script
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40997
Felix Fietkau [Tue, 3 Jun 2014 13:59:43 +0000 (13:59 +0000)]
mac80211: backport a powersave related fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40995
Felix Fietkau [Tue, 3 Jun 2014 13:59:24 +0000 (13:59 +0000)]
mac80211: refresh patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40994
John Crispin [Tue, 3 Jun 2014 06:52:46 +0000 (06:52 +0000)]
base-files: /etc/rc.button/power should be executable
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40993
John Crispin [Tue, 3 Jun 2014 05:49:34 +0000 (05:49 +0000)]
kernel: fix kernel build for chipidea w/o usb-gadget
This resolves a module dependency kernel regression in r40905 with the
usb-chipidea module if usb-gadget was not selected.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40992
Luka Perkov [Mon, 2 Jun 2014 21:23:36 +0000 (21:23 +0000)]
imx6: ventana: remove non-trunk packages from defaults
The canutils package is in the packages repo and not part of trunk, so we
should not enable them by default.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40991
Luka Perkov [Mon, 2 Jun 2014 21:23:35 +0000 (21:23 +0000)]
imx6: ventana: add default kernel modules
Add the following kernel modules by default (which are present on most Ventana
baseboards):
- kmod-leds-gpio (user leds)
- kmod-sound-core (required as a dependency of the other sound modules)
- kmod-pps-gpio (Pulse-Per-Second)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40990
Luka Perkov [Mon, 2 Jun 2014 21:23:34 +0000 (21:23 +0000)]
imx6: update board names per device-tree updates
The Gateworks Ventana board names have been adjusted per upstream patches
to include all IMX6 SoC variants.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40989
Luka Perkov [Mon, 2 Jun 2014 21:23:32 +0000 (21:23 +0000)]
imx6: update 3.14 ventana dts with upstream fixes
update the Ventana DTS files with upstream fixes:
- The 'model' property in the imx-audio-sgtl5000 binding specifies the
user-visible name of the audio device. This should be something common and
not baseboard specific.
- removed obsolete crts
- fix include typo: The imx6q-gw51xx needs to include imx6qdl-gw51xx.dtsi
- fix gw52xx clock for sgtl5000 ananlog audio codec
- fix LVDS mapping for Ventana GW52xx/GW53xx/GW54xx
- add LVDS backlight for Ventana
- update model descriptions for all processor variants
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40988
Luka Perkov [Mon, 2 Jun 2014 21:23:29 +0000 (21:23 +0000)]
imx6: update 3.10 ventana dts
update the Ventana DTS files with upstream fixes:
- The 'model' property in the imx-audio-sgtl5000 binding specifies the
user-visible name of the audio device. This should be something common an
not baseboard specific.
- update model descriptions for all processor variants
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40987
Luka Perkov [Mon, 2 Jun 2014 19:48:22 +0000 (19:48 +0000)]
kernel: add another new config symbol for kernel 3.14
It was augmented by CONFIG_USB_GADGET...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 40986
Felix Fietkau [Mon, 2 Jun 2014 18:17:48 +0000 (18:17 +0000)]
mac80211: b43: make support for BCMA optional
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 40985
Felix Fietkau [Mon, 2 Jun 2014 18:17:44 +0000 (18:17 +0000)]
mac80211: b43: make B43_PHY_LP configurable
This allows saving 11772 B if disabled.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 40984
Felix Fietkau [Mon, 2 Jun 2014 18:13:38 +0000 (18:13 +0000)]
netfilter: split off header matching modules not used by the default config (reduces rootfs size and memory usage)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40983
Felix Fietkau [Mon, 2 Jun 2014 17:04:45 +0000 (17:04 +0000)]
brcm47xx: enable the low-memory feature flag
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40982
Felix Fietkau [Mon, 2 Jun 2014 17:04:41 +0000 (17:04 +0000)]
build: set default squashfs block size to 64k for low-memory systems
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40981
Felix Fietkau [Mon, 2 Jun 2014 17:04:38 +0000 (17:04 +0000)]
build: add a feature flag for low-memory systems
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40980
Felix Fietkau [Mon, 2 Jun 2014 17:04:34 +0000 (17:04 +0000)]
build: make the squashfs block size configurable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40979
Felix Fietkau [Mon, 2 Jun 2014 16:24:12 +0000 (16:24 +0000)]
ar71xx: fix compile error in r40969, refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40977
John Crispin [Mon, 2 Jun 2014 15:02:54 +0000 (15:02 +0000)]
ar71xx: WNDAP360 adding wifi LED support
I added WIFI LED support (so now AP blinks nicely), I removed WPS
button GPIO (as it doesn't exist) and changed GPIO for reset button.
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
SVN-Revision: 40976
John Crispin [Mon, 2 Jun 2014 14:56:41 +0000 (14:56 +0000)]
ar71xx: add profile and build image for HiWiFi HC6361.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 40975
John Crispin [Mon, 2 Jun 2014 14:56:35 +0000 (14:56 +0000)]
ar71xx: add user-space support for HiWiFi HC6361 board.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 40974
John Crispin [Mon, 2 Jun 2014 14:56:24 +0000 (14:56 +0000)]
ar71xx: add kernel support for HiWiFi HC6361.
This board manufactured by HiWiFi has the following features.
- Atheros 9331 SoC.
- 16MB flash and 64MB RAM.
- 4GB eMMC storage via SK6226 USB 2.0 controller.
- 2 LAN and 1 WAN ethernet ports with LEDs on them.
- 3 blue LEDs on the front panel.
- 1 button labeled as "reset".
- Powered by a USB cable.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 40973
John Crispin [Mon, 2 Jun 2014 14:45:25 +0000 (14:45 +0000)]
ar71xx: add support to TP-LINK TL-WA730RE v1
The TL-WA730RE seems to be almost identical to TL-WA701ND, just
that it comes without PoE and a stock-firmware claiming the device
to be a "Range Extender".
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 40972
John Crispin [Mon, 2 Jun 2014 14:45:21 +0000 (14:45 +0000)]
ar71xx: fix board detection for TL-WA7510N
Detect TL-WA7510N v1 by the board name as defined in mach-tl-wa901nd.c
and add hardware ID to tplink_board_detect
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 40971
John Crispin [Mon, 2 Jun 2014 14:45:17 +0000 (14:45 +0000)]
ar71xx: enable sysupgrade on wnr2000-v3
tested, works.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 40970
John Crispin [Mon, 2 Jun 2014 14:43:35 +0000 (14:43 +0000)]
ar71xx: add support for dlink dir-615-e1
Dlink dir-615-e1 can use dir-600-a1's image, but the image can't be
uploaded through dlink's normal firmware update web page.
Add profile for dir-615-e1 so the generated image can be uploaded
through the firmware update web page.
Signed-off-by: Zhao, Gang <gamerh2o@gmail.com>
SVN-Revision: 40969
Felix Fietkau [Mon, 2 Jun 2014 13:27:31 +0000 (13:27 +0000)]
target/imagebuilder: add missing package index (fixes #16675)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40968
Felix Fietkau [Mon, 2 Jun 2014 13:27:23 +0000 (13:27 +0000)]
scripts/bundle-libraries: fall back to only copying binaries if ldd is unavailable (e.g. non-linux system)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40967
John Crispin [Mon, 2 Jun 2014 13:21:52 +0000 (13:21 +0000)]
ar71xx: adjust OM2P profile for the OpenMesh OM2P-HSv2 board
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40966
John Crispin [Mon, 2 Jun 2014 13:21:47 +0000 (13:21 +0000)]
package/uboot-envtools: add OpenMesh OM2P-HSv2 support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40965
John Crispin [Mon, 2 Jun 2014 13:21:43 +0000 (13:21 +0000)]
package/om-watchdog: add OpenMesh OM2P-HSv2 support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40964
John Crispin [Mon, 2 Jun 2014 13:21:38 +0000 (13:21 +0000)]
ar71xx: add sysupgrade support for OpenMesh OM2P-HSv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40963
John Crispin [Mon, 2 Jun 2014 13:21:31 +0000 (13:21 +0000)]
ar71xx: add user-space support for OpenMesh OM2P-HSv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40962
John Crispin [Mon, 2 Jun 2014 13:21:26 +0000 (13:21 +0000)]
ar71xx: add kernel support for the OpenMesh OM2P-HSv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40961
John Crispin [Mon, 2 Jun 2014 13:21:22 +0000 (13:21 +0000)]
ar71xx: adjust OM2P profile for the OpenMesh OM2Pv2 board
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40960
John Crispin [Mon, 2 Jun 2014 13:21:17 +0000 (13:21 +0000)]
package/uboot-envtools: add OpenMesh OM2Pv2 support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40959
John Crispin [Mon, 2 Jun 2014 13:21:11 +0000 (13:21 +0000)]
package/om-watchdog: add OpenMesh OM2Pv2 support
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40958
John Crispin [Mon, 2 Jun 2014 13:21:07 +0000 (13:21 +0000)]
ar71xx: add sysupgrade support for OpenMesh OM2Pv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40957
John Crispin [Mon, 2 Jun 2014 13:21:02 +0000 (13:21 +0000)]
ar71xx: add user-space support for OpenMesh OM2Pv2
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40956
John Crispin [Mon, 2 Jun 2014 13:20:52 +0000 (13:20 +0000)]
ar71xx: add kernel support for the OpenMesh OM2Pv2 board
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 40955
John Crispin [Mon, 2 Jun 2014 13:10:53 +0000 (13:10 +0000)]
iwinfo: update nl80211 api to the latest one
modified version of http://patchwork.openwrt.org/patch/4533/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40954
John Crispin [Mon, 2 Jun 2014 13:10:49 +0000 (13:10 +0000)]
iwinfo: add 802.11ac hwmode support
In case of .11ac device the hwmode was not properly displayed.
This patch fixes it.
Signed-off-by: Marek Kwaczynski <marek.kwaczynski@tieto.com>
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
SVN-Revision: 40953
John Crispin [Mon, 2 Jun 2014 13:10:44 +0000 (13:10 +0000)]
iwinfo: add Atheros AR9580 to hardware.txt
Signed-off-by: Stefan Agner <stefan@agner.ch>
SVN-Revision: 40952
John Crispin [Mon, 2 Jun 2014 13:03:15 +0000 (13:03 +0000)]
config/Config-images.in: the ext4 series introduced a regression
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40951
Felix Fietkau [Mon, 2 Jun 2014 13:01:48 +0000 (13:01 +0000)]
polarssl: enable parallel build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40950
Felix Fietkau [Mon, 2 Jun 2014 13:01:44 +0000 (13:01 +0000)]
polarssl: remove polarssl-progs, it is just a random collection of test programs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40949
John Crispin [Mon, 2 Jun 2014 12:45:29 +0000 (12:45 +0000)]
lantiq: fix up eth_mac and ath_eep support
this patch got messed up by the last rebase
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40948
John Crispin [Mon, 2 Jun 2014 12:45:25 +0000 (12:45 +0000)]
x86: Compile xen-pci-frontend as module
modified version of -> http://patchwork.openwrt.org/patch/5535/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40947
John Crispin [Mon, 2 Jun 2014 12:45:22 +0000 (12:45 +0000)]
include: Allow git kernel branch selection
This allows the selection of a specific branch in the menuconfig
when using a kernel downloaded from GIT.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 40946
John Crispin [Mon, 2 Jun 2014 12:45:19 +0000 (12:45 +0000)]
include: Clean-up kernel git command options management
The way git options are managed in kernel-defaults.mk makes additions
difficult. If requires different code path for each option; it's
ok so far as we handle only one option, but if we want to make the git
clone mechanism more flexible, more option will be required, which
will become tedious.
So; we'll move the GIT options into a variable, that may or may not be
set depending on the configuration, and we'll pass this variable to the
git command.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 40945
John Crispin [Mon, 2 Jun 2014 12:45:16 +0000 (12:45 +0000)]
config: Remove KERNEL_GIT_LOCAL_REPOSITORY option
The GIT_LOCAL_REPOSITORY option adds the --reference argument to the
git clone kernel command line, if KERNEL_GIT_CLONE_URI is set.
This option is intended to speed-up the repo creation by using local
objets rather than downloading it. However, a local repo can be cloned
much faster by setting GIT_LOCAL_REPOSITORY directly to the local tree.
In that case, git clone will bypass the normal "git aware" transport
mechanism and clone the repository by copying and hardlinking objects
rather than downloading it, resulting in a significant speed increase.
That makes the GIT_LOCAL_REPOSITORY option pretty useless so we'll just
remove it and recommand the usage of KERNEL_GIT_CLONE_URI directly.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 40944
projects / openwrt / staging / stintel.git / log