openwrt/staging/blogic.git
7 years agonet: switchdev: add SET_SWITCHDEV_OPS helper
Simon Horman [Thu, 29 Jun 2017 20:08:11 +0000 (22:08 +0200)]
net: switchdev: add SET_SWITCHDEV_OPS helper

Add a helper to allow switchdev ops to be set if NET_SWITCHDEV is configured
and do nothing otherwise. This allows for slightly cleaner code which
uses switchdev but does not select NET_SWITCHDEV.

Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agosctp: remove an unnecessary check from sctp_endpoint_destroy
Xin Long [Thu, 29 Jun 2017 09:28:06 +0000 (17:28 +0800)]
sctp: remove an unnecessary check from sctp_endpoint_destroy

ep->base.sk gets it's value since sctp_endpoint_new, nowhere
will change it. So there's no need to check if it's null, as
it can never be null.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'net-refcount_t'
David S. Miller [Sat, 1 Jul 2017 14:39:09 +0000 (07:39 -0700)]
Merge branch 'net-refcount_t'

Elena Reshetova says:

====================
v3 net generic subsystem refcount conversions

Changes in v3:
Rebased on top of the net-next tree.

Changes in v2:
No changes in patches apart from rebases, but now by
default refcount_t = atomic_t (*) and uses all atomic standard operations
unless CONFIG_REFCOUNT_FULL is enabled. This is a compromise for the
systems that are critical on performance (such as net) and cannot accept even
slight delay on the refcounter operations.

This series, for core network subsystem components, replaces atomic_t reference
counters with the new refcount_t type and API (see include/linux/refcount.h).
By doing this we prevent intentional or accidental
underflows or overflows that can led to use-after-free vulnerabilities.
These patches contain only generic net pieces. Other changes will be sent separately.

The patches are fully independent and can be cherry-picked separately.
The big patches, such as conversions for sock structure, need a very detailed
look from maintainers: refcount managing is quite complex in them and while
it seems that they would benefit from the change, extra checking is needed.
The biggest corner issue is the fact that refcount_inc() does not increment
from zero.

If there are no objections to the patches, please merge them via respective trees.

* The respective change is currently merged into -next as
  "locking/refcount: Create unchecked atomic_t implementation".
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert packet_fanout.sk_ref from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:08:10 +0000 (13:08 +0300)]
net: convert packet_fanout.sk_ref from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert netlbl_lsm_cache.refcount from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:08:09 +0000 (13:08 +0300)]
net: convert netlbl_lsm_cache.refcount from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert net.passive from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:08:08 +0000 (13:08 +0300)]
net: convert net.passive from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert inet_frag_queue.refcnt from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:08:07 +0000 (13:08 +0300)]
net: convert inet_frag_queue.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert fib_rule.refcnt from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:08:06 +0000 (13:08 +0300)]
net: convert fib_rule.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert unix_address.refcnt from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:08:05 +0000 (13:08 +0300)]
net: convert unix_address.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert netpoll_info.refcnt from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:08:04 +0000 (13:08 +0300)]
net: convert netpoll_info.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert in_device.refcnt from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:08:03 +0000 (13:08 +0300)]
net: convert in_device.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert ip_mc_list.refcnt from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:08:02 +0000 (13:08 +0300)]
net: convert ip_mc_list.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert sock.sk_refcnt from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:08:01 +0000 (13:08 +0300)]
net: convert sock.sk_refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

This patch uses refcount_inc_not_zero() instead of
atomic_inc_not_zero_hint() due to absense of a _hint()
version of refcount API. If the hint() version must
be used, we might need to revisit API.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert sock.sk_wmem_alloc from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:08:00 +0000 (13:08 +0300)]
net: convert sock.sk_wmem_alloc from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert sk_buff_fclones.fclone_ref from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:07:59 +0000 (13:07 +0300)]
net: convert sk_buff_fclones.fclone_ref from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert sk_buff.users from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:07:58 +0000 (13:07 +0300)]
net: convert sk_buff.users from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert nf_bridge_info.use from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:07:57 +0000 (13:07 +0300)]
net: convert nf_bridge_info.use from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert neigh_params.refcnt from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:07:56 +0000 (13:07 +0300)]
net: convert neigh_params.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert neighbour.refcnt from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:07:55 +0000 (13:07 +0300)]
net: convert neighbour.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: convert inet_peer.refcnt from atomic_t to refcount_t
Reshetova, Elena [Fri, 30 Jun 2017 10:07:54 +0000 (13:07 +0300)]
net: convert inet_peer.refcnt from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
This conversion requires overall +1 on the whole
refcounting scheme.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'PTP-support-for-macb-driver'
David S. Miller [Fri, 30 Jun 2017 17:11:43 +0000 (13:11 -0400)]
Merge branch 'PTP-support-for-macb-driver'

Rafal Ozieblo says:

====================
PTP support for macb driver

This patch series adds support for PTP synchronization protocol
in Cadence GEM driver based on PHC.

v2 changes:
* removed alarm's support
* removed external time stamp support
* removed PTP event interrupt handling
* removed ptp_hw_support flag
* removed all extra sanity checks
* removed unnecessary #ifdef
* fixed coding style and alligment issues
* renamed macb.c to macb_main.c

v3 changes:
* added checking NULL ptr from ptp_clock_register()
* fixed error codes return
* locals list in "upside down Christmas tree" style
* fixed some other issues from review

v4 changes:
* respin to the newest next-next (28 Jun 2017)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: macb: Add hardware PTP support
Rafal Ozieblo [Thu, 29 Jun 2017 06:14:16 +0000 (07:14 +0100)]
net: macb: Add hardware PTP support

This patch is based on original Harini's patch and Andrei's patch,
implemented in a separate file to ease the review/maintanance
and integration with other platforms.

This driver supports GEM-GXL:
- Register ptp clock framework
- Initialize PTP related registers
- HW time stamp on the PTP Ethernet packets are received using the
  SO_TIMESTAMPING API. Time stamps are obtained from the dma buffer
  descriptors
- add macb_ptp to compilation chain

Signed-off-by: Rafal Ozieblo <rafalo@cadence.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: macb: macb.c changed to macb_main.c
Rafal Ozieblo [Thu, 29 Jun 2017 06:13:46 +0000 (07:13 +0100)]
net: macb: macb.c changed to macb_main.c

In case that macb is compiled as a module, macb.c has been renamed to
macb_main.c to avoid naming confusion in Makefile.

Signed-off-by: Rafal Ozieblo <rafalo@cadence.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: macb: Add tsu_clk to device tree
Rafal Ozieblo [Thu, 29 Jun 2017 06:13:20 +0000 (07:13 +0100)]
net: macb: Add tsu_clk to device tree

Signed-off-by: Rafal Ozieblo <rafalo@cadence.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: macb: Add support for PTP timestamps in DMA descriptors
Rafal Ozieblo [Thu, 29 Jun 2017 06:12:51 +0000 (07:12 +0100)]
net: macb: Add support for PTP timestamps in DMA descriptors

This patch adds support for PTP timestamps in
DMA buffer descriptors. It checks capability at runtime
and uses appropriate buffer descriptor.

Signed-off-by: Rafal Ozieblo <rafalo@cadence.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Fri, 30 Jun 2017 16:43:08 +0000 (12:43 -0400)]
Merge git://git./linux/kernel/git/davem/net

A set of overlapping changes in macvlan and the rocker
driver, nothing serious.

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
David S. Miller [Fri, 30 Jun 2017 13:27:09 +0000 (06:27 -0700)]
Merge git://git./linux/kernel/git/pablo/nf-next

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for your net-next
tree. This batch contains connection tracking updates for the cleanup
iteration path, patches from Florian Westphal:

X) Skip unconfirmed conntracks in nf_ct_iterate_cleanup_net(), just set
   dying bit to let the CPU release them.

X) Add nf_ct_iterate_destroy() to be used on module removal, to kill
   conntrack from all namespace.

X) Restart iteration on hashtable resizing, since both may occur at
   the same time.

X) Use the new nf_ct_iterate_destroy() to remove conntrack with NAT
   mapping on module removal.

X) Use nf_ct_iterate_destroy() to remove conntrack entries helper
   module removal, from Liping Zhang.

X) Use nf_ct_iterate_cleanup_net() to remove the timeout extension
   if user requests this, also from Liping.

X) Add net_ns_barrier() and use it from FTP helper, so make sure
   no concurrent namespace removal happens at the same time while
   the helper module is being removed.

X) Use NFPROTO_MAX in layer 3 conntrack protocol array, to reduce
   module size. Same thing in nf_tables.

Updates for the nf_tables infrastructure:

X) Prepare usage of the extended ACK reporting infrastructure for
   nf_tables.

X) Remove unnecessary forward declaration in nf_tables hash set.

X) Skip set size estimation if number of element is not specified.

X) Changes to accomodate a (faster) unresizable hash set implementation,
   for anonymous sets and dynamic size fixed sets with no timeouts.

X) Faster lookup function for unresizable hash table for 2 and 4
   bytes key.

And, finally, a bunch of asorted small updates and cleanups:

X) Do not hold reference to netdev from ipt_CLUSTER, instead subscribe
   to device events and look up for index from the packet path, this
   is fixing an issue that is present since the very beginning, patch
   from Xin Long.

X) Use nf_register_net_hook() in ipt_CLUSTER, from Florian Westphal.

X) Use ebt_invalid_target() whenever possible in the ebtables tree,
   from Gao Feng.

X) Calm down compilation warning in nf_dup infrastructure, patch from
   stephen hemminger.

X) Statify functions in nftables rt expression, also from stephen.

X) Update Makefile to use canonical method to specify nf_tables-objs.
   From Jike Song.

X) Use nf_conntrack_helpers_register() in amanda and H323.

X) Space cleanup for ctnetlink, from linzhang.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Thu, 29 Jun 2017 21:30:07 +0000 (14:30 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Need to access netdev->num_rx_queues behind an accessor in netvsc
    driver otherwise the build breaks with some configs, from Arnd
    Bergmann.

 2) Add dummy xfrm_dev_event() so that build doesn't fail when
    CONFIG_XFRM_OFFLOAD is not set. From Hangbin Liu.

 3) Don't OOPS when pfkey_msg2xfrm_state() signals an erros, from Dan
    Carpenter.

 4) Fix MCDI command size for filter operations in sfc driver, from
    Martin Habets.

 5) Fix UFO segmenting so that we don't calculate incorrect checksums,
    from Michal Kubecek.

 6) When ipv6 datagram connects fail, reset destination address and
    port. From Wei Wang.

 7) TCP disconnect must reset the cached receive DST, from WANG Cong.

 8) Fix sign extension bug on 32-bit in dev_get_stats(), from Eric
    Dumazet.

 9) fman driver has to depend on HAS_DMA, from Madalin Bucur.

10) Fix bpf pointer leak with xadd in verifier, from Daniel Borkmann.

11) Fix negative page counts with GFO, from Michal Kubecek.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits)
  sfc: fix attempt to translate invalid filter ID
  net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
  bpf: prevent leaking pointer via xadd on unpriviledged
  arcnet: com20020-pci: add missing pdev setup in netdev structure
  arcnet: com20020-pci: fix dev_id calculation
  arcnet: com20020: remove needless base_addr assignment
  Trivial fix to spelling mistake in arc_printk message
  arcnet: change irq handler to lock irqsave
  rocker: move dereference before free
  mlxsw: spectrum_router: Fix NULL pointer dereference
  net: sched: Fix one possible panic when no destroy callback
  virtio-net: serialize tx routine during reset
  net: usb: asix88179_178a: Add support for the Belkin B2B128
  fsl/fman: add dependency on HAS_DMA
  net: prevent sign extension in dev_get_stats()
  tcp: reset sk_rx_dst in tcp_disconnect()
  net: ipv6: reset daddr and dport in sk if connect() fails
  bnx2x: Don't log mc removal needlessly
  bnxt_en: Fix netpoll handling.
  bnxt_en: Add missing logic to handle TPA end error conditions.
  ...

7 years agoMerge tag 'for-4.12/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 29 Jun 2017 21:23:02 +0000 (14:23 -0700)]
Merge tag 'for-4.12/dm-fixes-5' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - dm thinp fix for crash that will occur when metadata device failure
   races with discard passdown to the underlying data device.

 - dm raid fix to not access the superblock's >= 1.9.0 'sectors' member
   unconditionally.

* tag 'for-4.12/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin: do not queue freed thin mapping for next stage processing
  dm raid: fix oops on upgrading to extended superblock format

7 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Thu, 29 Jun 2017 21:10:37 +0000 (14:10 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "Two fixes that should go into this release.

  One is an nvme regression fix from Keith, fixing a missing queue
  freeze if the controller is being reset. This causes the reset to
  hang.

  The other is a fix for a leak of the bio protection info, if smaller
  sized O_DIRECT is used. This fix should be more involved as we have
  other problematic paths in the kernel, but given as this isn't a
  regression in this series, we'll tackle those for 4.13"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: provide bio_uninit() free freeing integrity/task associations
  nvme/pci: Fix stuck nvme reset

7 years agosfc: fix attempt to translate invalid filter ID
Edward Cree [Thu, 29 Jun 2017 15:50:06 +0000 (16:50 +0100)]
sfc: fix attempt to translate invalid filter ID

When filter insertion fails with no rollback, we were trying to convert
 EFX_EF10_FILTER_ID_INVALID to an id to store in 'ids' (which is either
 vlan->uc or vlan->mc).  This would WARN_ON_ONCE and then record a bogus
 filter ID of 0x1fff, neither of which is a good thing.

Fixes: 0ccb998bf46d ("sfc: fix filter_id misinterpretation in edge case")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'mlx4-dynamic-tc-tx-queues'
David S. Miller [Thu, 29 Jun 2017 19:56:16 +0000 (15:56 -0400)]
Merge branch 'mlx4-dynamic-tc-tx-queues'

Tariq Toukan says:

====================
mlx4_en dynamic TC tx queues

This patchset from Inbar aligns the number of TX queues
to the actual need, according to the TC configuration.

Series generated against net-next commit:
2ee87db3a287 Merge branch 'nfp-get_phys_port_name-for-representors-and-SR-IOV-reorder'
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/mlx4_en: Do not allocate redundant TX queues when TC is disabled
Inbar Karmy [Thu, 29 Jun 2017 11:07:57 +0000 (14:07 +0300)]
net/mlx4_en: Do not allocate redundant TX queues when TC is disabled

Currently the number of TX queues that are allocated doesn't depend
on the number of TCs, the module always loads with max num of UP
per channel.
In order to prevent the allocation of unnecessary memory, the
module will load with minimum number of UPs per channel, and the
user will be able to control the number of TX queues per channel
by changing the number of TC to 8 using the tc command.
The variable num_up will hold the information about the current
number of UPs.
Due to the change, needed to remove the lines that set the value of
UP to be different than zero in the func "mlx4_en_select_queue",
since now the num of TX queues that are allocated is only one per channel
in default.
In order not to force the UP to be zero in case of only one TC, added
a condition before forcing it in the func "mlx4_en_fill_qp_context".

Tested:
After the module is loaded with minimum number of UP per channel, to
increase num of TCs to 8, use:
tc qdisc add dev ens8 root mqprio num_tc 8
In order to decrease the number of TCs to minimum number of UP per channel,
use:
tc qdisc del dev ens8 root

Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: Tarick Bedeir <tarick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/mlx4_en: Add dynamic variable to hold the number of user priorities (UP)
Inbar Karmy [Thu, 29 Jun 2017 11:07:56 +0000 (14:07 +0300)]
net/mlx4_en: Add dynamic variable to hold the number of user priorities (UP)

Until this patch, the number of UPs was hard coded for eight.
Replace this with a variable in struct "mlx4_en_port_profile".
Currently, the variable will hold the maximum number of UP,
as before.
The patch creates an infrastructure to add an option for dynamic
change of the actual number of TCs.

Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: Tarick Bedeir <tarick@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
Michal Kubeček [Thu, 29 Jun 2017 09:13:36 +0000 (11:13 +0200)]
net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()

Recently I started seeing warnings about pages with refcount -1. The
problem was traced to packets being reused after their head was merged into
a GRO packet by skb_gro_receive(). While bisecting the issue pointed to
commit c21b48cc1bbf ("net: adjust skb->truesize in ___pskb_trim()") and
I have never seen it on a kernel with it reverted, I believe the real
problem appeared earlier when the option to merge head frag in GRO was
implemented.

Handling NAPI_GRO_FREE_STOLEN_HEAD state was only added to GRO_MERGED_FREE
branch of napi_skb_finish() so that if the driver uses napi_gro_frags()
and head is merged (which in my case happens after the skb_condense()
call added by the commit mentioned above), the skb is reused including the
head that has been merged. As a result, we release the page reference
twice and eventually end up with negative page refcount.

To fix the problem, handle NAPI_GRO_FREE_STOLEN_HEAD in napi_frags_finish()
the same way it's done in napi_skb_finish().

Fixes: d7e8883cfcf4 ("net: make GRO aware of skb->head_frag")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: bridge: constify attribute_group structures.
Arvind Yadav [Thu, 29 Jun 2017 11:09:38 +0000 (16:39 +0530)]
net: bridge: constify attribute_group structures.

attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
   2645     896       0    3541     dd5 net/bridge/br_sysfs_br.o

File size After adding 'const':
   text    data     bss     dec     hex filename
   2701     832       0    3533     dcd net/bridge/br_sysfs_br.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: constify attribute_group structures.
Arvind Yadav [Thu, 29 Jun 2017 11:01:26 +0000 (16:31 +0530)]
net: constify attribute_group structures.

attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/device.h> work with const
attribute_group. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
   9968    3168      16   13152    3360 net/core/net-sysfs.o

File size After adding 'const':
   text    data     bss     dec     hex filename
  10160    2976      16   13152    3360 net/core/net-sysfs.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: freescale: gianfar : constify dev_pm_ops structures.
Arvind Yadav [Thu, 29 Jun 2017 05:56:06 +0000 (11:26 +0530)]
net: freescale: gianfar : constify dev_pm_ops structures.

dev_pm_ops are not supposed to change at runtime. All functions
working with dev_pm_ops provided by <linux/device.h> work with const
dev_pm_ops. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
  19057     392       0   19449    4bf9 drivers/net/ethernet/freescale/gianfar.o

File size After adding 'const':
   text    data     bss     dec     hex filename
  19249     192       0   19441    4bf1 drivers/net/ethernet/freescale/gianfar.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: smc91x: constify dev_pm_ops structures.
Arvind Yadav [Thu, 29 Jun 2017 05:51:00 +0000 (11:21 +0530)]
net: smc91x: constify dev_pm_ops structures.

dev_pm_ops are not supposed to change at runtime. All functions
working with dev_pm_ops provided by <linux/device.h> work with const
dev_pm_ops. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
  18709     401       0   19110    4aa6 drivers/net/ethernet/smsc/smc91x.o

File size After adding 'const':
   text    data     bss     dec     hex filename
  18901     201       0   19102    4a9e drivers/net/ethernet/smsc/smc91x.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ibm: ibmveth: constify dev_pm_ops structures.
Arvind Yadav [Thu, 29 Jun 2017 05:44:50 +0000 (11:14 +0530)]
net: ibm: ibmveth: constify dev_pm_ops structures.

dev_pm_ops are not supposed to change at runtime. All functions
working with dev_pm_ops provided by <linux/device.h> work with const
dev_pm_ops. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
  15426    1256       0   16682    412a drivers/net/ethernet/ibm/ibmveth.o

File size After adding 'const':
   text    data     bss     dec     hex filename
  15618    1064       0   16682    412a drivers/net/ethernet/ibm/ibmveth.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobpf: prevent leaking pointer via xadd on unpriviledged
Daniel Borkmann [Thu, 29 Jun 2017 01:04:59 +0000 (03:04 +0200)]
bpf: prevent leaking pointer via xadd on unpriviledged

Leaking kernel addresses on unpriviledged is generally disallowed,
for example, verifier rejects the following:

  0: (b7) r0 = 0
  1: (18) r2 = 0xffff897e82304400
  3: (7b) *(u64 *)(r1 +48) = r2
  R2 leaks addr into ctx

Doing pointer arithmetic on them is also forbidden, so that they
don't turn into unknown value and then get leaked out. However,
there's xadd as a special case, where we don't check the src reg
for being a pointer register, e.g. the following will pass:

  0: (b7) r0 = 0
  1: (7b) *(u64 *)(r1 +48) = r0
  2: (18) r2 = 0xffff897e82304400 ; map
  4: (db) lock *(u64 *)(r1 +48) += r2
  5: (95) exit

We could store the pointer into skb->cb, loose the type context,
and then read it out from there again to leak it eventually out
of a map value. Or more easily in a different variant, too:

   0: (bf) r6 = r1
   1: (7a) *(u64 *)(r10 -8) = 0
   2: (bf) r2 = r10
   3: (07) r2 += -8
   4: (18) r1 = 0x0
   6: (85) call bpf_map_lookup_elem#1
   7: (15) if r0 == 0x0 goto pc+3
   R0=map_value(ks=8,vs=8,id=0),min_value=0,max_value=0 R6=ctx R10=fp
   8: (b7) r3 = 0
   9: (7b) *(u64 *)(r0 +0) = r3
  10: (db) lock *(u64 *)(r0 +0) += r6
  11: (b7) r0 = 0
  12: (95) exit

  from 7 to 11: R0=inv,min_value=0,max_value=0 R6=ctx R10=fp
  11: (b7) r0 = 0
  12: (95) exit

Prevent this by checking xadd src reg for pointer types. Also
add a couple of test cases related to this.

Fixes: 1be7f75d1668 ("bpf: enable non-root eBPF programs")
Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoibmvnic: Fix assignment of RX/TX IRQ's
Thomas Falcon [Thu, 29 Jun 2017 00:55:54 +0000 (19:55 -0500)]
ibmvnic: Fix assignment of RX/TX IRQ's

The driver currently creates RX/TX queues during device probe, but
assigns IRQ's to them during device open. On reset, however,
IRQ's are assigned when resetting the queues. If there is a reset
while the device is closed and the device is later opened, the driver will
request IRQ's twice, causing the open to fail. This patch assigns
the IRQ's in the ibmvnic_init function after the queues are reset or
initialized, ensuring IRQ's are only requested once.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ipmr: Add ipmr_rtm_getroute
Donald Sharp [Wed, 28 Jun 2017 17:58:57 +0000 (13:58 -0400)]
net: ipmr: Add ipmr_rtm_getroute

Add to RTNL_FAMILY_IPMR, RTM_GETROUTE the ability
to retrieve one S,G mroute from a specified table.

*,G will return mroute information for just that
particular mroute if it exists.  This is because
it is entirely possible to have more S's then
can fit in one skb to return to the requesting
process.

Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobpf: Fix out-of-bound access on interpreters[]
Martin KaFai Lau [Wed, 28 Jun 2017 17:41:24 +0000 (10:41 -0700)]
bpf: Fix out-of-bound access on interpreters[]

The index is off-by-one when fp->aux->stack_depth
has already been rounded up to 32.  In particular,
if stack_depth is 512, the index will be 16.

The fix is to round_up and then takes -1 instead of round_down.

[   22.318680] ==================================================================
[   22.319745] BUG: KASAN: global-out-of-bounds in bpf_prog_select_runtime+0x48a/0x670
[   22.320737] Read of size 8 at addr ffffffff82aadae0 by task sockex3/1946
[   22.321646]
[   22.321858] CPU: 1 PID: 1946 Comm: sockex3 Tainted: G        W       4.12.0-rc6-01680-g2ee87db3a287 #22
[   22.323061] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.el7.centos 04/01/2014
[   22.324260] Call Trace:
[   22.324612]  dump_stack+0x67/0x99
[   22.325081]  print_address_description+0x1e8/0x290
[   22.325734]  ? bpf_prog_select_runtime+0x48a/0x670
[   22.326360]  kasan_report+0x265/0x350
[   22.326860]  __asan_report_load8_noabort+0x19/0x20
[   22.327484]  bpf_prog_select_runtime+0x48a/0x670
[   22.328109]  bpf_prog_load+0x626/0xd40
[   22.328637]  ? __bpf_prog_charge+0xc0/0xc0
[   22.329222]  ? check_nnp_nosuid.isra.61+0x100/0x100
[   22.329890]  ? __might_fault+0xf6/0x1b0
[   22.330446]  ? lock_acquire+0x360/0x360
[   22.331013]  SyS_bpf+0x67c/0x24d0
[   22.331491]  ? trace_hardirqs_on+0xd/0x10
[   22.332049]  ? __getnstimeofday64+0xaf/0x1c0
[   22.332635]  ? bpf_prog_get+0x20/0x20
[   22.333135]  ? __audit_syscall_entry+0x300/0x600
[   22.333770]  ? syscall_trace_enter+0x540/0xdd0
[   22.334339]  ? exit_to_usermode_loop+0xe0/0xe0
[   22.334950]  ? do_syscall_64+0x48/0x410
[   22.335446]  ? bpf_prog_get+0x20/0x20
[   22.335954]  do_syscall_64+0x181/0x410
[   22.336454]  entry_SYSCALL64_slow_path+0x25/0x25
[   22.337121] RIP: 0033:0x7f263fe81f19
[   22.337618] RSP: 002b:00007ffd9a3440c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141
[   22.338619] RAX: ffffffffffffffda RBX: 0000000000aac5fb RCX: 00007f263fe81f19
[   22.339600] RDX: 0000000000000030 RSI: 00007ffd9a3440d0 RDI: 0000000000000005
[   22.340470] RBP: 0000000000a9a1e0 R08: 0000000000a9a1e0 R09: 0000009d00000001
[   22.341430] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000010000
[   22.342411] R13: 0000000000a9a023 R14: 0000000000000001 R15: 0000000000000003
[   22.343369]
[   22.343593] The buggy address belongs to the variable:
[   22.344241]  interpreters+0x80/0x980
[   22.344708]
[   22.344908] Memory state around the buggy address:
[   22.345556]  ffffffff82aad980: 00 00 00 04 fa fa fa fa 04 fa fa fa fa fa fa fa
[   22.346449]  ffffffff82aada00: 00 00 00 00 00 fa fa fa fa fa fa fa 00 00 00 00
[   22.347361] >ffffffff82aada80: 00 00 00 00 00 00 00 00 00 00 00 00 fa fa fa fa
[   22.348301]                                                        ^
[   22.349142]  ffffffff82aadb00: 00 01 fa fa fa fa fa fa 00 00 00 00 00 00 00 00
[   22.350058]  ffffffff82aadb80: 00 00 07 fa fa fa fa fa 00 00 05 fa fa fa fa fa
[   22.350984] ==================================================================

Fixes: b870aa901f4b ("bpf: use different interpreter depending on required stack size")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: fix spelling mistake: "avialable" -> "available"
Colin Ian King [Wed, 28 Jun 2017 16:51:10 +0000 (17:51 +0100)]
amd-xgbe: fix spelling mistake: "avialable" -> "available"

Trivial fix to spelling mistake in netdev_err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'arcnet-features'
David S. Miller [Thu, 29 Jun 2017 19:26:14 +0000 (15:26 -0400)]
Merge branch 'arcnet-features'

Michael Grzeschik says:

====================
arcnet: Collection of latest features

Here we sum up the latest features to improve the arcnet framework. One
patch is used to get feedback from the transfer queue about failed xfers
by adding the err_skb message queue. Beside that we improve the
backplane status that can be read by the PCI-based cards and offer that
status via an extra sysfs attribute. In the last patch we add another
card type PCIFB2.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoarcnet: com20020-pci: add support for PCIFB2 card
Michael Grzeschik [Wed, 28 Jun 2017 16:32:21 +0000 (18:32 +0200)]
arcnet: com20020-pci: add support for PCIFB2 card

We add support for the PCIFB2 card from EAE.

Beside other cards, this card has the backplane mode enabled by default.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoarcnet: com20020-pci: handle backplane mode depending on card type
Michael Grzeschik [Wed, 28 Jun 2017 16:32:20 +0000 (18:32 +0200)]
arcnet: com20020-pci: handle backplane mode depending on card type

We read the backplane mode of each subcard from bits 2 and 3 of the misc
register.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoarcnet: com20020-pci: add attribute to readback backplane status
Michael Grzeschik [Wed, 28 Jun 2017 16:32:19 +0000 (18:32 +0200)]
arcnet: com20020-pci: add attribute to readback backplane status

We add the sysfs interface the read back the backplane
status of the interface.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoarcnet: add err_skb package for package status feedback
Michael Grzeschik [Wed, 28 Jun 2017 16:32:18 +0000 (18:32 +0200)]
arcnet: add err_skb package for package status feedback

We need to track the status of our queued packages. This way the driving
process knows if failed packages need to be retransmitted. For this
purpose we queue the transferred/failed packages back into the err_skb
message queue added with some status information.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'arcnet-fixes'
David S. Miller [Thu, 29 Jun 2017 19:18:38 +0000 (15:18 -0400)]
Merge branch 'arcnet-fixes'

Michael Grzeschik says:

====================
arcnet: Collection of latest fixes

Here we sum up the recent fixes I collected on the way to use and
stabilise the framework. Part of it is an possible deadlock that we
prevent as well to fix the calculation of the dev_id that can be setup
by an rotary encoder. Beside that we added an trivial spelling patch and
fix some wrong and missing assignments that improves the code footprint.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoarcnet: com20020-pci: add missing pdev setup in netdev structure
Michael Grzeschik [Wed, 28 Jun 2017 16:28:37 +0000 (18:28 +0200)]
arcnet: com20020-pci: add missing pdev setup in netdev structure

We add the pdev data to the pci devices netdev structure. This way
the interface get consistent device names in the userspace (udev).

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoarcnet: com20020-pci: fix dev_id calculation
Michael Grzeschik [Wed, 28 Jun 2017 16:28:36 +0000 (18:28 +0200)]
arcnet: com20020-pci: fix dev_id calculation

The dev_id was miscalculated. Only the two bits 4-5 are relevant for the
MA1 card. PCIARC1 and PCIFB2 use the four bits 4-7 for id selection.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoarcnet: com20020: remove needless base_addr assignment
Michael Grzeschik [Wed, 28 Jun 2017 16:28:35 +0000 (18:28 +0200)]
arcnet: com20020: remove needless base_addr assignment

The assignment is superfluous.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoTrivial fix to spelling mistake in arc_printk message
Colin Ian King [Wed, 28 Jun 2017 16:28:34 +0000 (18:28 +0200)]
Trivial fix to spelling mistake in arc_printk message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoarcnet: change irq handler to lock irqsave
Michael Grzeschik [Wed, 28 Jun 2017 16:28:33 +0000 (18:28 +0200)]
arcnet: change irq handler to lock irqsave

This patch prevents the arcnet driver from the following deadlock.

[   41.273910] ======================================================
[   41.280397] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[   41.287433] 4.4.0-00034-gc0ae784 #536 Not tainted
[   41.292366] ------------------------------------------------------
[   41.298863] arcecho/233 [HC0[0]:SC0[2]:HE0:SE0] is trying to acquire:
[   41.305628]  (&(&lp->lock)->rlock){+.+...}, at: [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[   41.315199]
[   41.315199] and this task is already holding:
[   41.321324]  (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8
[   41.329593] which would create a new lock dependency:
[   41.334893]  (_xmit_ARCNET#2){+.-...} -> (&(&lp->lock)->rlock){+.+...}
[   41.341801]
[   41.341801] but this new dependency connects a SOFTIRQ-irq-safe lock:
[   41.350108]  (_xmit_ARCNET#2){+.-...}
... which became SOFTIRQ-irq-safe at:
[   41.357539]   [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.362677]   [<c063ab8c>] dev_watchdog+0x5c/0x264
[   41.367723]   [<c0094edc>] call_timer_fn+0x6c/0xf4
[   41.372759]   [<c00950b8>] run_timer_softirq+0x154/0x210
[   41.378340]   [<c0036b30>] __do_softirq+0x144/0x298
[   41.383469]   [<c0036fb4>] irq_exit+0xcc/0x130
[   41.388138]   [<c0085c50>] __handle_domain_irq+0x60/0xb4
[   41.393728]   [<c0014578>] __irq_svc+0x58/0x78
[   41.398402]   [<c0010274>] arch_cpu_idle+0x24/0x3c
[   41.403443]   [<c007127c>] cpu_startup_entry+0x1f8/0x25c
[   41.409029]   [<c09adc90>] start_kernel+0x3c0/0x3cc
[   41.414170]
[   41.414170] to a SOFTIRQ-irq-unsafe lock:
[   41.419931]  (&(&lp->lock)->rlock){+.+...}
... which became SOFTIRQ-irq-unsafe at:
[   41.427996] ...  [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.433409]   [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[   41.439646]   [<c0089120>] handle_nested_irq+0x8c/0xec
[   41.445063]   [<c03c1170>] regmap_irq_thread+0x190/0x314
[   41.450661]   [<c0087244>] irq_thread_fn+0x1c/0x34
[   41.455700]   [<c0087548>] irq_thread+0x13c/0x1dc
[   41.460649]   [<c0050f10>] kthread+0xe4/0xf8
[   41.465158]   [<c000f810>] ret_from_fork+0x14/0x24
[   41.470207]
[   41.470207] other info that might help us debug this:
[   41.470207]
[   41.478627]  Possible interrupt unsafe locking scenario:
[   41.478627]
[   41.485763]        CPU0                    CPU1
[   41.490521]        ----                    ----
[   41.495279]   lock(&(&lp->lock)->rlock);
[   41.499414]                                local_irq_disable();
[   41.505636]                                lock(_xmit_ARCNET#2);
[   41.511967]                                lock(&(&lp->lock)->rlock);
[   41.518741]   <Interrupt>
[   41.521490]     lock(_xmit_ARCNET#2);
[   41.525356]
[   41.525356]  *** DEADLOCK ***
[   41.525356]
[   41.531587] 1 lock held by arcecho/233:
[   41.535617]  #0:  (_xmit_ARCNET#2){+.-...}, at: [<c06b934c>] packet_direct_xmit+0xfc/0x1c8
[   41.544355]
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
[   41.552362] -> (_xmit_ARCNET#2){+.-...} ops: 27 {
[   41.557357]    HARDIRQ-ON-W at:
[   41.560664]                     [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.567445]                     [<c063ba28>] dev_deactivate_many+0x114/0x304
[   41.574866]                     [<c063bc3c>] dev_deactivate+0x24/0x38
[   41.581646]                     [<c0630374>] linkwatch_do_dev+0x40/0x74
[   41.588613]                     [<c06305d8>] __linkwatch_run_queue+0xec/0x140
[   41.596120]                     [<c0630658>] linkwatch_event+0x2c/0x34
[   41.602991]                     [<c004af30>] process_one_work+0x188/0x40c
[   41.610131]                     [<c004b200>] worker_thread+0x4c/0x480
[   41.616912]                     [<c0050f10>] kthread+0xe4/0xf8
[   41.623048]                     [<c000f810>] ret_from_fork+0x14/0x24
[   41.629735]    IN-SOFTIRQ-W at:
[   41.633039]                     [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.639820]                     [<c063ab8c>] dev_watchdog+0x5c/0x264
[   41.646508]                     [<c0094edc>] call_timer_fn+0x6c/0xf4
[   41.653190]                     [<c00950b8>] run_timer_softirq+0x154/0x210
[   41.660425]                     [<c0036b30>] __do_softirq+0x144/0x298
[   41.667201]                     [<c0036fb4>] irq_exit+0xcc/0x130
[   41.673518]                     [<c0085c50>] __handle_domain_irq+0x60/0xb4
[   41.680754]                     [<c0014578>] __irq_svc+0x58/0x78
[   41.687077]                     [<c0010274>] arch_cpu_idle+0x24/0x3c
[   41.693769]                     [<c007127c>] cpu_startup_entry+0x1f8/0x25c
[   41.701006]                     [<c09adc90>] start_kernel+0x3c0/0x3cc
[   41.707791]    INITIAL USE at:
[   41.711003]                    [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.717696]                    [<c063ba28>] dev_deactivate_many+0x114/0x304
[   41.725026]                    [<c063bc3c>] dev_deactivate+0x24/0x38
[   41.731718]                    [<c0630374>] linkwatch_do_dev+0x40/0x74
[   41.738593]                    [<c06305d8>] __linkwatch_run_queue+0xec/0x140
[   41.746011]                    [<c0630658>] linkwatch_event+0x2c/0x34
[   41.752789]                    [<c004af30>] process_one_work+0x188/0x40c
[   41.759847]                    [<c004b200>] worker_thread+0x4c/0x480
[   41.766541]                    [<c0050f10>] kthread+0xe4/0xf8
[   41.772596]                    [<c000f810>] ret_from_fork+0x14/0x24
[   41.779198]  }
[   41.780945]  ... key      at: [<c124d620>] netdev_xmit_lock_key+0x38/0x1c8
[   41.788192]  ... acquired at:
[   41.791309]    [<c007bed8>] lock_acquire+0x70/0x90
[   41.796361]    [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54
[   41.802324]    [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[   41.808844]    [<c06b9380>] packet_direct_xmit+0x130/0x1c8
[   41.814622]    [<c06bc7e4>] packet_sendmsg+0x3b8/0x680
[   41.820034]    [<c05fe8b0>] sock_sendmsg+0x14/0x24
[   41.825091]    [<c05ffd68>] SyS_sendto+0xb8/0xe0
[   41.829956]    [<c05ffda8>] SyS_send+0x18/0x20
[   41.834638]    [<c000f780>] ret_fast_syscall+0x0/0x1c
[   41.839954]
[   41.841514]
the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock:
[   41.850302] -> (&(&lp->lock)->rlock){+.+...} ops: 5 {
[   41.855644]    HARDIRQ-ON-W at:
[   41.858945]                     [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.865726]                     [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[   41.873607]                     [<c0089120>] handle_nested_irq+0x8c/0xec
[   41.880666]                     [<c03c1170>] regmap_irq_thread+0x190/0x314
[   41.887901]                     [<c0087244>] irq_thread_fn+0x1c/0x34
[   41.894593]                     [<c0087548>] irq_thread+0x13c/0x1dc
[   41.901195]                     [<c0050f10>] kthread+0xe4/0xf8
[   41.907338]                     [<c000f810>] ret_from_fork+0x14/0x24
[   41.914025]    SOFTIRQ-ON-W at:
[   41.917328]                     [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.924106]                     [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[   41.931981]                     [<c0089120>] handle_nested_irq+0x8c/0xec
[   41.939028]                     [<c03c1170>] regmap_irq_thread+0x190/0x314
[   41.946264]                     [<c0087244>] irq_thread_fn+0x1c/0x34
[   41.952954]                     [<c0087548>] irq_thread+0x13c/0x1dc
[   41.959548]                     [<c0050f10>] kthread+0xe4/0xf8
[   41.965689]                     [<c000f810>] ret_from_fork+0x14/0x24
[   41.972379]    INITIAL USE at:
[   41.975595]                    [<c06f8fc8>] _raw_spin_lock+0x30/0x40
[   41.982283]                    [<bf083d54>] arcnet_interrupt+0x2c/0x800 [arcnet]
[   41.990063]                    [<c0089120>] handle_nested_irq+0x8c/0xec
[   41.997027]                    [<c03c1170>] regmap_irq_thread+0x190/0x314
[   42.004172]                    [<c0087244>] irq_thread_fn+0x1c/0x34
[   42.010766]                    [<c0087548>] irq_thread+0x13c/0x1dc
[   42.017267]                    [<c0050f10>] kthread+0xe4/0xf8
[   42.023314]                    [<c000f810>] ret_from_fork+0x14/0x24
[   42.029903]  }
[   42.031648]  ... key      at: [<bf0854cc>] __key.42091+0x0/0xfffff0f8 [arcnet]
[   42.039255]  ... acquired at:
[   42.042372]    [<c007bed8>] lock_acquire+0x70/0x90
[   42.047413]    [<c06f9140>] _raw_spin_lock_irqsave+0x40/0x54
[   42.053364]    [<bf083bc8>] arcnet_send_packet+0x60/0x1c0 [arcnet]
[   42.059872]    [<c06b9380>] packet_direct_xmit+0x130/0x1c8
[   42.065634]    [<c06bc7e4>] packet_sendmsg+0x3b8/0x680
[   42.071030]    [<c05fe8b0>] sock_sendmsg+0x14/0x24
[   42.076069]    [<c05ffd68>] SyS_sendto+0xb8/0xe0
[   42.080926]    [<c05ffda8>] SyS_send+0x18/0x20
[   42.085601]    [<c000f780>] ret_fast_syscall+0x0/0x1c
[   42.090918]
[   42.092481]
[   42.092481] stack backtrace:
[   42.097065] CPU: 0 PID: 233 Comm: arcecho Not tainted 4.4.0-00034-gc0ae784 #536
[   42.104751] Hardware name: Generic AM33XX (Flattened Device Tree)
[   42.111183] [<c0017ec8>] (unwind_backtrace) from [<c00139d0>] (show_stack+0x10/0x14)
[   42.119337] [<c00139d0>] (show_stack) from [<c02a82c4>] (dump_stack+0x8c/0x9c)
[   42.126937] [<c02a82c4>] (dump_stack) from [<c0078260>] (check_usage+0x4bc/0x63c)
[   42.134815] [<c0078260>] (check_usage) from [<c0078438>] (check_irq_usage+0x58/0xb0)
[   42.142964] [<c0078438>] (check_irq_usage) from [<c007aaa0>] (__lock_acquire+0x1524/0x20b0)
[   42.151740] [<c007aaa0>] (__lock_acquire) from [<c007bed8>] (lock_acquire+0x70/0x90)
[   42.159886] [<c007bed8>] (lock_acquire) from [<c06f9140>] (_raw_spin_lock_irqsave+0x40/0x54)
[   42.168768] [<c06f9140>] (_raw_spin_lock_irqsave) from [<bf083bc8>] (arcnet_send_packet+0x60/0x1c0 [arcnet])
[   42.179115] [<bf083bc8>] (arcnet_send_packet [arcnet]) from [<c06b9380>] (packet_direct_xmit+0x130/0x1c8)
[   42.189182] [<c06b9380>] (packet_direct_xmit) from [<c06bc7e4>] (packet_sendmsg+0x3b8/0x680)
[   42.198059] [<c06bc7e4>] (packet_sendmsg) from [<c05fe8b0>] (sock_sendmsg+0x14/0x24)
[   42.206199] [<c05fe8b0>] (sock_sendmsg) from [<c05ffd68>] (SyS_sendto+0xb8/0xe0)
[   42.213978] [<c05ffd68>] (SyS_sendto) from [<c05ffda8>] (SyS_send+0x18/0x20)
[   42.221388] [<c05ffda8>] (SyS_send) from [<c000f780>] (ret_fast_syscall+0x0/0x1c)

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
   ---
   v1 -> v2: removed unneeded zero assignment of flags
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'amd-xgbe-updates'
David S. Miller [Thu, 29 Jun 2017 19:14:20 +0000 (15:14 -0400)]
Merge branch 'amd-xgbe-updates'

Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver updates 2016-06-28

The following updates and fixes are included in this driver update series:

- Simplify mailbox interface code
- Fix SFP supported and advertising settings
- Fix PTP initialization register usage
- Insure there is timestamp skb present before using it
- Add a timeout to timestamp register updates
- Handle return code from software reset function
- Some fixes for handling 2.5Gbps rates
- Limit I2C error messages
- Fix non-DMA interrupt handling through tasklet usage
- Add NUMA affinity support for memory allocations
- Add NUMA affinity support for interrupts
- Prepare for more fine-grained cache coherency controls
- Simplify setting the DMA burst length programming
- Performance improvements

This patch series is based on net-next.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Adjust register settings to improve performance
Lendacky, Thomas [Wed, 28 Jun 2017 18:43:26 +0000 (13:43 -0500)]
amd-xgbe: Adjust register settings to improve performance

Add support to change some general performance settings and to provide
some performance settings based on the device that is probed.

This includes:

- Setting the maximum read/write outstanding request limit
- Reducing the AXI interface burst length size
- Selectively setting the Tx and Rx descriptor pre-fetch threshold
- Selectively setting additional cache coherency controls

Tested and verified on all versions of the hardware.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Simplify the burst length settings
Lendacky, Thomas [Wed, 28 Jun 2017 18:43:18 +0000 (13:43 -0500)]
amd-xgbe: Simplify the burst length settings

Currently the driver hardcodes the PBLx8 setting.  Remove the need for
specifying the PBLx8 setting and automatically calculate based on the
specified PBL value. Since the PBLx8 setting applies to both Tx and Rx
use the same PBL value for both of them.

Also, the driver currently uses a bit field to set the AXI master burst
len setting. Change to the full bit field range and set the burst length
based on the specified value.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Prepare for more fine grained cache coherency controls
Lendacky, Thomas [Wed, 28 Jun 2017 18:43:09 +0000 (13:43 -0500)]
amd-xgbe: Prepare for more fine grained cache coherency controls

In prep for setting fine grained read and write DMA cache coherency
controls, allow specific values to be used to set the cache coherency
registers.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Add NUMA affinity support for IRQ hints
Lendacky, Thomas [Wed, 28 Jun 2017 18:43:00 +0000 (13:43 -0500)]
amd-xgbe: Add NUMA affinity support for IRQ hints

For IRQ affinity, set the affinity hints for the IRQs to be (initially) on
the processors corresponding to the NUMA node of the device.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Add NUMA affinity support for memory allocations
Lendacky, Thomas [Wed, 28 Jun 2017 18:42:51 +0000 (13:42 -0500)]
amd-xgbe: Add NUMA affinity support for memory allocations

Add support to perform memory allocations on the node of the device. The
original allocation or the ring structure and Tx/Rx queues allocated all
of the memory at once and then carved it up for each channel and queue.
To best ensure that we get as much memory from the NUMA node as we can,
break the channel and ring allocations into individual allocations.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Re-issue interrupt if interrupt status not cleared
Lendacky, Thomas [Wed, 28 Jun 2017 18:42:42 +0000 (13:42 -0500)]
amd-xgbe: Re-issue interrupt if interrupt status not cleared

Some of the device interrupts should function as level interrupts. For
some hardware configurations this requires setting some control bits
so that if the interrupt status has not been cleared the interrupt
should be reissued.

Additionally, when using MSI or MSI-X interrupts, run the interrupt
service routine as a tasklet so that the re-issuance of the interrupt
is handled properly.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Limit the I2C error messages that are output
Lendacky, Thomas [Wed, 28 Jun 2017 18:42:35 +0000 (13:42 -0500)]
amd-xgbe: Limit the I2C error messages that are output

When I2C communication fails, it tends to always fail. Rather than
continuously issue an error message (once per second in most cases),
change the message to be issued just once.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Fixes for working with PHYs that support 2.5GbE
Lendacky, Thomas [Wed, 28 Jun 2017 18:42:25 +0000 (13:42 -0500)]
amd-xgbe: Fixes for working with PHYs that support 2.5GbE

The driver has some missing functionality when operating in the mode that
supports 2.5GbE.  Fix the driver to fully recognize and support this speed.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Handle return code from software reset function
Lendacky, Thomas [Wed, 28 Jun 2017 18:42:16 +0000 (13:42 -0500)]
amd-xgbe: Handle return code from software reset function

Currently the function that performs a software reset of the hardware
provides a return code.  During driver probe check this return code and
exit with an error if the software reset fails.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Prevent looping forever if timestamp update fails
Lendacky, Thomas [Wed, 28 Jun 2017 18:42:07 +0000 (13:42 -0500)]
amd-xgbe: Prevent looping forever if timestamp update fails

Just to be on the safe side, should the update of the timestamp registers
not complete, issue a warning rather than looping forever waiting for the
update to complete.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Add a check for an skb in the timestamp path
Lendacky, Thomas [Wed, 28 Jun 2017 18:41:58 +0000 (13:41 -0500)]
amd-xgbe: Add a check for an skb in the timestamp path

Spurious Tx timestamp interrupts can cause an oops in the Tx timestamp
processing function if a Tx timestamp skb is NULL. Add a check to insure
a Tx timestamp skb is present before attempting to use it.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Use the proper register during PTP initialization
Lendacky, Thomas [Wed, 28 Jun 2017 18:41:49 +0000 (13:41 -0500)]
amd-xgbe: Use the proper register during PTP initialization

During PTP initialization, the Timestamp Control register should be
cleared and not the Tx Configuration register.  While this typo causes
the wrong register to be cleared, the default value of each register and
and the fact that the Tx Configuration register is programmed afterwards
doesn't result in a bug, hence only fixing in net-next.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Fix SFP PHY supported/advertised settings
Lendacky, Thomas [Wed, 28 Jun 2017 18:41:40 +0000 (13:41 -0500)]
amd-xgbe: Fix SFP PHY supported/advertised settings

When using SFPs, the supported and advertised settings should be initially
based on the SFP that has been detected.  The code currently indicates the
overall support of the device as opposed to what the SFP is capable of.
Update the code to change the supported link modes, auto-negotiation, etc.
to be based on the installed SFP.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoamd-xgbe: Simplify mailbox interface rate change code
Lendacky, Thomas [Wed, 28 Jun 2017 18:41:32 +0000 (13:41 -0500)]
amd-xgbe: Simplify mailbox interface rate change code

Simplify and centralize the mailbox command rate change interface by
having a single function perform the writes to the mailbox registers
to issue the request.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agorocker: move dereference before free
Dan Carpenter [Wed, 28 Jun 2017 11:44:21 +0000 (14:44 +0300)]
rocker: move dereference before free

My static checker complains that ofdpa_neigh_del() can sometimes free
"found".   It just makes sense to use it first before deleting it.

Fixes: ecf244f753e0 ("rocker: fix maybe-uninitialized warning")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'bpf-Add-syscall-lookup-support-for-fd-array-and-htab'
David S. Miller [Thu, 29 Jun 2017 17:13:26 +0000 (13:13 -0400)]
Merge branch 'bpf-Add-syscall-lookup-support-for-fd-array-and-htab'

Martin KaFai Lau says:

====================
bpf: Add syscall lookup support for fd array and htab

This patchset adds BPF_MAP_LOOKUP_ELEM syscall support for
BPF_MAP_TYPE_PROG_ARRAY,
BPF_MAP_TYPE_ARRAY_OF_MAPS and
BPF_MAP_TYPE_HASH_OF_MAPS
====================

Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobpf: Add test for syscall on fd array/htab lookup
Martin KaFai Lau [Wed, 28 Jun 2017 06:08:35 +0000 (23:08 -0700)]
bpf: Add test for syscall on fd array/htab lookup

Checks are added to the existing sockex3 and test_map_in_map test.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agobpf: Add syscall lookup support for fd array and htab
Martin KaFai Lau [Wed, 28 Jun 2017 06:08:34 +0000 (23:08 -0700)]
bpf: Add syscall lookup support for fd array and htab

This patch allows userspace to do BPF_MAP_LOOKUP_ELEM on
BPF_MAP_TYPE_PROG_ARRAY,
BPF_MAP_TYPE_ARRAY_OF_MAPS and
BPF_MAP_TYPE_HASH_OF_MAPS.

The lookup returns a prog-id or map-id to the userspace.
The userspace can then use the BPF_PROG_GET_FD_BY_ID
or BPF_MAP_GET_FD_BY_ID to get a fd.

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agomlxsw: spectrum_router: Fix NULL pointer dereference
Ido Schimmel [Wed, 28 Jun 2017 06:03:12 +0000 (09:03 +0300)]
mlxsw: spectrum_router: Fix NULL pointer dereference

In case a VLAN device is enslaved to a bridge we shouldn't create a
router interface (RIF) for it when it's configured with an IP address.
This is already handled by the driver for other types of netdevs, such
as physical ports and LAG devices.

If this IP address is then removed and the interface is subsequently
unlinked from the bridge, a NULL pointer dereference can happen, as the
original 802.1d FID was replaced with an rFID which was then deleted.

To reproduce:
$ ip link set dev enp3s0np9 up
$ ip link add name enp3s0np9.111 link enp3s0np9 type vlan id 111
$ ip link set dev enp3s0np9.111 up
$ ip link add name br0 type bridge
$ ip link set dev br0 up
$ ip link set enp3s0np9.111 master br0
$ ip address add dev enp3s0np9.111 192.168.0.1/24
$ ip address del dev enp3s0np9.111 192.168.0.1/24
$ ip link set dev enp3s0np9.111 nomaster

Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Petr Machata <petrm@mellanox.com>
Tested-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: sched: Fix one possible panic when no destroy callback
Gao Feng [Wed, 28 Jun 2017 04:53:54 +0000 (12:53 +0800)]
net: sched: Fix one possible panic when no destroy callback

When qdisc fail to init, qdisc_create would invoke the destroy callback
to cleanup. But there is no check if the callback exists really. So it
would cause the panic if there is no real destroy callback like the qdisc
codel, fq, and so on.

Take codel as an example following:
When a malicious user constructs one invalid netlink msg, it would cause
codel_init->codel_change->nla_parse_nested failed.
Then kernel would invoke the destroy callback directly but qdisc codel
doesn't define one. It causes one panic as a result.

Now add one the check for destroy to avoid the possible panic.

Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agovirtio-net: serialize tx routine during reset
Jason Wang [Wed, 28 Jun 2017 01:51:03 +0000 (09:51 +0800)]
virtio-net: serialize tx routine during reset

We don't hold any tx lock when trying to disable TX during reset, this
would lead a use after free since ndo_start_xmit() tries to access
the virtqueue which has already been freed. Fix this by using
netif_tx_disable() before freeing the vqs, this could make sure no tx
after vq freeing.

Reported-by: Jean-Philippe Menil <jpmenil@gmail.com>
Tested-by: Jean-Philippe Menil <jpmenil@gmail.com>
Fixes commit f600b6905015 ("virtio_net: Add XDP support")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Robert McCabe <robert.mccabe@rockwellcollins.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: stmmac: Add additional registers for dwmac1000_dma ethtool
Thor Thayer [Tue, 27 Jun 2017 22:16:27 +0000 (17:16 -0500)]
net: stmmac: Add additional registers for dwmac1000_dma ethtool

Version 3.70a of the Designware has additional DMA registers so
add those to the ethtool DMA Register dump.
Offset 9  - Receive Interrupt Watchdog Timer Register
Offset 10 - AXI Bus Mode Register
Offset 11 - AHB or AXI Status Register
Offset 22 - HW Feature Register

Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge tag 'mlx5-updates-2017-06-27' of git://git.kernel.org/pub/scm/linux/kernel...
David S. Miller [Thu, 29 Jun 2017 16:30:16 +0000 (12:30 -0400)]
Merge tag 'mlx5-updates-2017-06-27' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2017-06-27 (Innova IPsec offload support)

This patchset adds support for Innova IPSec network interface card.

About Innova device:
--------------------
Innova is a network card with a ConnectX chip and an FPGA chip as a
 bump-on-the-wire.

               Internal
+----------+   Link       +-----------------+
|          +--------------+      FPGA       |  +------+
| ConnectX |              |  Shell          +--+ QSFP |
|          +--------------+    +-------+    |  | Port |
+----------+      I2C     |    |  SBU  |    |  +------+
                          |    +-------+    |
                          +--+----------+---+
                             |          |
                          +--+--+   +---+---+
                          | DDR |   | Flash |
                          +-----+   +-------+

The FPGA synthesized logic is loaded from dedicated flash storage and has
 access to its own dedicated DDR RAM.
The ConnectX chip firmware programs the FPGA by accessing its configuration
space over either the slow internal I2C link or the high-speed internal link.

The FPGA logic is divided into a "Shell" and a "Sandbox Unit" (SBU).
mlx5_core driver (with CONFIG_MLX5_FPGA) handles all shell functionality,
while other components may handle the various SBU functionalities.

The driver opens high-speed reliable communication channels with the shell and
the SBU over the internal link.
These channels may be used for high-bandwidth configuration or for SBU-specific
out-of-band data paths.

About Innova IPSec device:
--------------------------
Innova IPSec is a network card that allows offloading IPSec cryptography operations
from the host CPU to the NIC. It is an Innova card with an IPSec SBU.
The hardware keeps the database of IPSec Security Associations (SADB) in the FPGA's
DDR memory.

               Internal
+----------+   Link       +-----------------+
|          +--------------+      FPGA       |  +------+
| ConnectX |              |  Shell          +--+ QSFP |
|          +--------------+    +-------+    |  | Port |
+----------+ Internal I2C |    | IPSec |    |  +------+
                          |    |  SBU  |    |
                          |    +-------+    |
                          +--+----------+---+
                             |          |
                          +--+--+   +---+---+
                          | DDR |   |       |
                          |     |   | Flash |
                          |SADB |   |       |
                          +-----+   +-------+

Modes and ciphers:
Currently the following modes and ciphers are supported:
IPv4 and IPv6
ESP tunnel and transport modes
AES 128 and 256 bit encryption, with GCM authentication (RFC4106)

IV is generated using seqiv, in sync with Linux's geniv.

More modes and ciphers may be added later.

Notes:
In the future similar functionality will be included in a single-chip NIC.

About the driver:
-----------------
Patches 1-4 prepare some existing driver code for the new feature:
  * Add support for reserved GIDs in the hardware GID table
  * Allow multiple modules to enable hardware RoCE support independently
Patches 5-6 define structs and helper functions for QP work-queues.
Patches 7-11 add various FPGA-related features required for Innova.
IPSec.
Patch 12 adds abstraction layer for Mellanox IPSec-offload capable devices.
atches 13-16 add IPSec offload support to the mlx5 netdevice.

This driver services the new IPSec offload API introduced in commit
d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API")

Configuration Path:
If Innova IPSec device is detected, the mlx5e netdevice gets the new
NETIF_F_HW_ESP feature and the xdo callbacks, indicating ESP offload
capabilities, and also the matching TX checksum and GSO features.

The driver configures offloaded Security Associations (SAs) by sending
an ADD_SA or DEL_SA message to the IPSec SBU, which updates the SADB in DDR.
These messages and their responses are sent over a high-speed channel.
Counters for ethtool are retrieved by the driver from the SBU.

Data path:
On receive path, the SBU decrypts ESP packets which match the offloaded SADB,
but keeps them encapsulated.
The SBU injects metadata (Mellanox owned ethertype) indicating that crypto-offload
has taken place, the SA with which it was done, and the authentication result.

The ConnectX chip performs RX checksum offload on the packet, and RSS using the
ESP SPI value.  The driver detects the special ethertype, and attaches a struct
secpath to the RX SKB, including flags to indicate that crypto offload took place,
the authentication result, and which xfrm_state was used for decryption, in the
olen and ovec members. The RX SKB may have useful CHECKSUM_COMPLETE. A separate
patchset will add support for that in the xfrm stack.

On transmit path, the stack encapsulates the packet but does not encrypt it, and
indicates in the SKB's secpath that crypto offload is to be performed and the SA
to use to do so.
The driver avoids performing crypto-offload for ESP fragments, and packets with
IP options, as the SBU cannot currently do that.  For eligible packets, the driver
prepends a special ethertype with metadata instructing the hardware to perform crypto offload.
The stack builds regular (non-GSO) SKBs so that they contain a placeholder for the ESP trailer.
The driver trims it off, because the SBU automatically appends the trailer for offloaded packets.
The ConnectX chip performs TX checksum offload on inner UDP or TCP packets,
and GSO for TCP packets (duplicating the prepended metadata).
The segmented packets then undergo encryption in the SBU before going on the wire.

Performance:
We measure single stream of TCP on Intel(R) Xeon(R) CPU E5-2643 v2 @3.50GHz
Using AES-NI with ESP GSO we get constant 4.1 Gbps.
Using crypto offload we get constant 18 Gbps.

Note that these numbers require CHECKSUM_COMPLETE support in XFRM, which we submit separately.

-  Ilan Tayari
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoMerge branch 'net-fix-sw-timestamping'
David S. Miller [Thu, 29 Jun 2017 16:28:57 +0000 (12:28 -0400)]
Merge branch 'net-fix-sw-timestamping'

Ivan Khoronzhuk says:

====================
net: fix sw timestamping for non PTP packets

This series contains several corrections connected with timestamping
for cpsw and netcp drivers based on same cpts module.

Based on net/next
====================

Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ethernet: ti: netcp_ethss: use cpts to check if packet needs timestamping
Ivan Khoronzhuk [Tue, 27 Jun 2017 13:58:53 +0000 (16:58 +0300)]
net: ethernet: ti: netcp_ethss: use cpts to check if packet needs timestamping

There is cpts function to check if packet can be timstamped with cpts.
Seems that ptp_classify_raw cover all cases listed with "case".

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ethernet: ti: cpsw: fix sw timestamping for non PTP packets
Ivan Khoronzhuk [Tue, 27 Jun 2017 13:58:52 +0000 (16:58 +0300)]
net: ethernet: ti: cpsw: fix sw timestamping for non PTP packets

The cpts can timestmap only ptp packets at this moment, so driver
cannot mark every packet as though it's going to be timestamped,
only because h/w timestamping for given skb is enabled with
SKBTX_HW_TSTAMP. It doesn't allow to use sw timestamping, as result
outgoing packet is not timestamped at all if it's not PTP and h/w
timestamping is enabled. So, fix it by setting SKBTX_IN_PROGRESS
only for PTP packets.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: ethernet: ti: cpsw: move skb timestamp to packet_submit
Ivan Khoronzhuk [Tue, 27 Jun 2017 13:58:51 +0000 (16:58 +0300)]
net: ethernet: ti: cpsw: move skb timestamp to packet_submit

Move sw timestamp function close to channel submit function.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agocavium: thunder: Remove duplicate "netdev->name" logging output
Joe Perches [Tue, 27 Jun 2017 10:56:54 +0000 (03:56 -0700)]
cavium: thunder: Remove duplicate "netdev->name" logging output

Using netdev_<level>(netdev, "%s: ...", netdev->name) duplicates the
name in the output.  Remove those uses.

Miscellanea:

o Use the netif_<level> convenience macros at the same time

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet/mlx4: fix spelling mistake: "enforcment" -> "enforcement"
Colin Ian King [Tue, 27 Jun 2017 10:36:49 +0000 (11:36 +0100)]
net/mlx4: fix spelling mistake: "enforcment" -> "enforcement"

Trivial fix to spelling mistake in mlx4_dbg debug message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: atl1c: fix spelling mistake: "droppted" -> "dropped"
Colin Ian King [Tue, 27 Jun 2017 09:51:22 +0000 (10:51 +0100)]
net: atl1c: fix spelling mistake: "droppted" -> "dropped"

Trivial fix to spelling mistake in netif_info message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoarm: sun8i: orangepi-2: use internal phy-mode
LABBE Corentin [Tue, 27 Jun 2017 09:28:06 +0000 (11:28 +0200)]
arm: sun8i: orangepi-2: use internal phy-mode

Since the PHY used is internal, simply set phy-mode as internal.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoarm: sun8i: nanopi-neo: use internal phy-mode
LABBE Corentin [Tue, 27 Jun 2017 09:28:05 +0000 (11:28 +0200)]
arm: sun8i: nanopi-neo: use internal phy-mode

Since the PHY used is internal, simply set phy-mode as internal.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoarm: sun8i: orangepi-one: use internal phy-mode
LABBE Corentin [Tue, 27 Jun 2017 09:28:04 +0000 (11:28 +0200)]
arm: sun8i: orangepi-one: use internal phy-mode

Since the PHY used is internal, simply set phy-mode as internal.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoarm: sun8i: orangepi-zero: use internal phy-mode
LABBE Corentin [Tue, 27 Jun 2017 09:28:03 +0000 (11:28 +0200)]
arm: sun8i: orangepi-zero: use internal phy-mode

Since the PHY used is internal, simply set phy-mode as internal.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoarm: sun8i: orangepipc: use internal phy-mode
LABBE Corentin [Tue, 27 Jun 2017 09:28:02 +0000 (11:28 +0200)]
arm: sun8i: orangepipc: use internal phy-mode

Since the PHY used is internal, simply set phy-mode as internal.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agonet: stmmac: support future possible different internal phy mode
LABBE Corentin [Tue, 27 Jun 2017 09:28:01 +0000 (11:28 +0200)]
net: stmmac: support future possible different internal phy mode

The current way to find if the phy is internal is to compare DT phy-mode
and emac_variant/internal_phy.
But it will negate a possible future SoC where an external PHY use the
same phy mode than the internal one.

By using phy-mode = "internal" we permit to have an external PHY with
the same mode than the internal one.

Reported-by: André Przywara <andre.przywara@arm.com>
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoBonding: Convert multiple netdev_info messages to netdev_dbg
Michael Dilmore [Mon, 26 Jun 2017 15:49:46 +0000 (16:49 +0100)]
Bonding: Convert multiple netdev_info messages to netdev_dbg

The bond_options.c file contains multiple netdev_info statements that clutter kernel output.
This patch replaces all netdev_info with netdev_dbg and adds a netdev_dbg statement for the
packets per slave parameter. Also fixes misalignment at line 467.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael J Dilmore <michael.j.dilmore@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
7 years agoarch: remove unused macro/function thread_saved_pc()
Tobias Klauser [Wed, 28 Jun 2017 13:30:02 +0000 (15:30 +0200)]
arch: remove unused macro/function thread_saved_pc()

The only user of thread_saved_pc() in non-arch-specific code was removed
in commit 8243d5597793 ("sched/core: Remove pointless printout in
sched_show_task()").  Remove the implementations as well.

Some architectures use thread_saved_pc() in their arch-specific code.
Leave their thread_saved_pc() intact.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
7 years agoblock: provide bio_uninit() free freeing integrity/task associations
Jens Axboe [Wed, 28 Jun 2017 21:30:13 +0000 (15:30 -0600)]
block: provide bio_uninit() free freeing integrity/task associations

Wen reports significant memory leaks with DIF and O_DIRECT:

"With nvme devive + T10 enabled, On a system it has 256GB and started
logging /proc/meminfo & /proc/slabinfo for every minute and in an hour
it increased by 15968128 kB or ~15+GB.. Approximately 256 MB / minute
leaking.

/proc/meminfo | grep SUnreclaim...

SUnreclaim:      6752128 kB
SUnreclaim:      6874880 kB
SUnreclaim:      7238080 kB
....
SUnreclaim:     22307264 kB
SUnreclaim:     22485888 kB
SUnreclaim:     22720256 kB

When testcases with T10 enabled call into __blkdev_direct_IO_simple,
code doesn't free memory allocated by bio_integrity_alloc. The patch
fixes the issue. HTX has been run with +60 hours without failure."

Since __blkdev_direct_IO_simple() allocates the bio on the stack, it
doesn't go through the regular bio free. This means that any ancillary
data allocated with the bio through the stack is not freed. Hence, we
can leak the integrity data associated with the bio, if the device is
using DIF/DIX.

Fix this by providing a bio_uninit() and export it, so that we can use
it to free this data. Note that this is a minimal fix for this issue.
Any current user of bio's that are allocated outside of
bio_alloc_bioset() suffers from this issue, most notably some drivers.
We will fix those in a more comprehensive patch for 4.13. This also
means that the commit marked as being fixed by this isn't the real
culprit, it's just the most obvious one out there.

Fixes: 542ff7bf18c6 ("block: new direct I/O implementation")
Reported-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
7 years agoMerge tag 'nfs-for-4.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Linus Torvalds [Wed, 28 Jun 2017 20:27:15 +0000 (13:27 -0700)]
Merge tag 'nfs-for-4.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 "Bugfixes include:

   - stable fix for exclusive create if the server supports the umask
     attribute

   - trunking detection should handle ERESTARTSYS/EINTR

   - stable fix for a race in the LAYOUTGET function

   - stable fix to revert "nfs_rename() handle -ERESTARTSYS dentry left
     behind"

   - nfs4_callback_free_slot() cannot call nfs4_slot_tbl_drain_complete()"

* tag 'nfs-for-4.12-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4.1: nfs4_callback_free_slot() cannot call nfs4_slot_tbl_drain_complete()
  Revert "NFS: nfs_rename() handle -ERESTARTSYS dentry left behind"
  NFSv4.1: Fix a race in nfs4_proc_layoutget
  NFS: Trunking detection should handle ERESTARTSYS/EINTR
  NFSv4.2: Don't send mode again in post-EXCLUSIVE4_1 SETATTR with umask

7 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Wed, 28 Jun 2017 20:22:26 +0000 (13:22 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "This is the final set of fixes for -rc8, just a few i915 and one
  vmwgfx ones.

  I'm off on holidays for a week, so if anything shows up for fixes I've
  asked Daniel or Sean Paul to herd it in the right direction"

[ The additional etnaviv fixes were already herded towards me as seen in
  my previous pull - Linus ]

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr
  drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocations
  drm/i915: Hold struct_mutex for per-file stats in debugfs/i915_gem_object
  drm/i915: Retire the VMA's fence tracker before unbinding

7 years agoMerge branch 'etnaviv/fixes' of git://git.pengutronix.de/git/lst/linux
Linus Torvalds [Wed, 28 Jun 2017 20:13:48 +0000 (13:13 -0700)]
Merge branch 'etnaviv/fixes' of git://git.pengutronix.de/git/lst/linux

Pull drm/etnaviv fixes from Lucas Stach:
 "I realized I just missed the cut-off point for the final drm fixes
  pull, but I have 2 more etnaviv fixes that need to go into 4.12, as
  they fix fallout from the explicit sync work introduced in the last
  merge window"

[ Pulling directly because Dave is on vacation. Noted by Daniel Vetter,
  and acked by Dave Airlie  - Linus ]

* 'etnaviv/fixes' of git://git.pengutronix.de/git/lst/linux:
  drm/etnaviv: Fix implicit/explicit sync sense inversion
  drm/etnaviv: fix submit flags getting overwritten by BO content

7 years agodrm/etnaviv: Fix implicit/explicit sync sense inversion
Daniel Stone [Thu, 22 Jun 2017 11:22:22 +0000 (12:22 +0100)]
drm/etnaviv: Fix implicit/explicit sync sense inversion

We were reading the no-implicit sync flag the wrong way around,
synchronizing too much for the explicit case, and not at all for the
implicit case. Oops.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>