John Crispin [Sun, 6 Jan 2013 10:01:53 +0000 (10:01 +0000)]
missing underscore in 3.3 regmap patch
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35018
Felix Fietkau [Sat, 5 Jan 2013 13:33:44 +0000 (13:33 +0000)]
kernel: port the regmap fix to 3.6 (#12749), refresh patches for other versions
SVN-Revision: 35016
John Crispin [Sat, 5 Jan 2013 00:20:05 +0000 (00:20 +0000)]
fix regmap debloat patch
SVN-Revision: 35015
Felix Fietkau [Fri, 4 Jan 2013 17:41:23 +0000 (17:41 +0000)]
mac80211: add dependency of PACKAGE_MAC80211_DEBUGFS
I wanted to use some statistics from /sys/kernel/debug/ieee80211,
so I enabled PACKAGE_MAC80211_DEBUGFS. But I could not use it,
because CONFIG_KERNEL_DEBUG_FS was not set and it's a little bit
hidden. After manually setting CONFIG_KERNEL_DEBUG_FS to y,
everything was fine. This patch automatically selects
CONFIG_KERNEL_DEBUG_FS if PACKAGE_MAC80211_DEBUGFS is set.
Additionally, the help text says "Say N unless you know you need this.",
but it's default y. This help text is copied verbatim from the
kernel's Kconfig and not true for us. So remove this part of the
help text
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
SVN-Revision: 35014
Felix Fietkau [Fri, 4 Jan 2013 16:10:17 +0000 (16:10 +0000)]
uci: update to latest version, adds list delete, removes unused plugin support
SVN-Revision: 35013
Steven Barth [Fri, 4 Jan 2013 15:59:28 +0000 (15:59 +0000)]
firewall: Add ULA site border for IPv6 traffic This prevents private traffic from leaking out to the internet
SVN-Revision: 35012
Jonas Gorski [Fri, 4 Jan 2013 14:47:57 +0000 (14:47 +0000)]
bcm63xx: Add Huawei HG556a support
Add Huawei EchoLife HG556a support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: added some code style fixes]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35011
Jonas Gorski [Fri, 4 Jan 2013 14:47:50 +0000 (14:47 +0000)]
bcm63xx: Fix caldata partition mtd patch
Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash.
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 35010
Jonas Gorski [Fri, 4 Jan 2013 14:47:43 +0000 (14:47 +0000)]
bcm63xx: remove 3.3 support
3.6 is tested enough to be considered stable.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35009
Jo-Philipp Wich [Fri, 4 Jan 2013 14:08:08 +0000 (14:08 +0000)]
iwinfo: don't use the txpower value from debugfs for now, it does not match the values reported via wext
SVN-Revision: 35007
John Crispin [Fri, 4 Jan 2013 09:32:06 +0000 (09:32 +0000)]
don't depend on lua
Delete +lua from libiwinfo-lua.
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
SVN-Revision: 35005
Felix Fietkau [Thu, 3 Jan 2013 18:52:15 +0000 (18:52 +0000)]
kernel: add a config option for direct i/o support
SVN-Revision: 35001
Hauke Mehrtens [Thu, 3 Jan 2013 18:52:08 +0000 (18:52 +0000)]
mac80211: b43: add firmware for HT-PHY by default.
remove firmware for LP-Phy core rev 14, I have never seen such a device.
SVN-Revision: 35000
Felix Fietkau [Thu, 3 Jan 2013 18:39:50 +0000 (18:39 +0000)]
kernel: move regmap bloat out of the kernel image if it is only being used in modules
SVN-Revision: 34999
Felix Fietkau [Thu, 3 Jan 2013 18:04:04 +0000 (18:04 +0000)]
add kmod-fs-configfs to replace kernel bloat added by selecting kmod-mmc-over-gpio
SVN-Revision: 34998
Hauke Mehrtens [Thu, 3 Jan 2013 16:56:54 +0000 (16:56 +0000)]
brcm47xx: various fixes and code cleanups for irq code
This is based on a patch send by Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34997
Hauke Mehrtens [Thu, 3 Jan 2013 02:07:11 +0000 (02:07 +0000)]
broadcom-diag: add diag support for Linksys E1000 V1
This adds diag leds/buttons support for Linksys E1000 V1. It worked on
my router, however it may need some tweaking by people more familiar
with openwrt and c to make it fit for commiting.
Thank you hhm for this patch.
SVN-Revision: 34996
Hauke Mehrtens [Thu, 3 Jan 2013 02:05:22 +0000 (02:05 +0000)]
brcm47xx: add bgmac driver
This Ethernet driver is in early development stage and still has some problems.
This was working on my bcm4716 based device.
Thanks to Rafał Miłecki <zajec5@gmail.com> for writing this driver.
SVN-Revision: 34995
Hauke Mehrtens [Thu, 3 Jan 2013 02:00:25 +0000 (02:00 +0000)]
brcm47xx: build b44 as a module
SVN-Revision: 34994
Hauke Mehrtens [Thu, 3 Jan 2013 01:59:43 +0000 (01:59 +0000)]
brcm47xx: run ifup before starting the switch
In addition check_module is not needed, nobody checks the return value.
SVN-Revision: 34993
Hauke Mehrtens [Thu, 3 Jan 2013 01:58:01 +0000 (01:58 +0000)]
switch: ROBO Switch Gigabit MII Support
I wrote this patch some time ago because I had a need for one of the
Gigabit ports (Linksys E3000) to be forced to 100FD. This is based
on the robocfg sources included w/ the RT-N16 sources from ASUS.
Since work is progressing on a BGMAC driver that could be included in
OpenWRT, this may be useful to someone else.
In testing, forcing the speed to 10/100 or 1000 worked fine; however,
when trying to force full-duplex mode, the result was always
half-duplex. I was not able to isolate the source of the problem
(this patch, driver or H/W limitation). The only way I could get it
to work was to set the port to Auto, but then only advertise 100FD
(not included in this patch).
I have a modified version of the robocfg package as well, I'd have to
clean it up a little first (remove the full-duplex hack) before
submitting it if there is interest.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34992
Hauke Mehrtens [Thu, 3 Jan 2013 01:57:19 +0000 (01:57 +0000)]
switch: improve error messages
This is in part based on a patch send by Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34991
Hauke Mehrtens [Thu, 3 Jan 2013 01:56:13 +0000 (01:56 +0000)]
brcm47xx: BCMA - IRQ Update - Fix IRQ Flag for I2S Core
Adjust the IRQ Flag value from 8 to 7 for I2S Core for BCM4716 and
BCM4748 (per the Broadcom SDK). IRQ Flag values greater than 7 are
ignored when setting the interrupt masks.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34990
Hauke Mehrtens [Thu, 3 Jan 2013 01:55:34 +0000 (01:55 +0000)]
brcm47xx: improve IRQ handling for bcma based devices
This was party inspirited by patches send by Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34989
Hauke Mehrtens [Thu, 3 Jan 2013 01:53:30 +0000 (01:53 +0000)]
brcm47xx: add a new version of the nvram rewrite patch
This is the version like it was send for mainline inclusion.
SVN-Revision: 34988
Hauke Mehrtens [Thu, 3 Jan 2013 01:51:31 +0000 (01:51 +0000)]
brcm47xx: move patches already in the mainline kernel to the front
SVN-Revision: 34987
Hauke Mehrtens [Thu, 3 Jan 2013 01:48:43 +0000 (01:48 +0000)]
brcm47xx: remove support for kernel version 3.3
SVN-Revision: 34986
Steven Barth [Wed, 2 Jan 2013 23:05:44 +0000 (23:05 +0000)]
ipv6-support: Update iteration * Add support for blocking forwarding while address assignments * Fix relay restarting function
SVN-Revision: 34985
Steven Barth [Wed, 2 Jan 2013 23:05:39 +0000 (23:05 +0000)]
odhcp6c: Add support for SNTP and SIP options
SVN-Revision: 34984
Steven Barth [Wed, 2 Jan 2013 23:05:35 +0000 (23:05 +0000)]
6relayd: Announce RDNSS and DNSSL via RA
SVN-Revision: 34983
Jo-Philipp Wich [Wed, 2 Jan 2013 19:10:29 +0000 (19:10 +0000)]
iwinfo: replace more wext calls with nl80211 equivalents, attempt to infer nl80211 tx power from debugfs before querying wext
SVN-Revision: 34982
Jo-Philipp Wich [Wed, 2 Jan 2013 19:10:24 +0000 (19:10 +0000)]
generic: add some missing kernel config symbols spotted on x86
SVN-Revision: 34981
Felix Fietkau [Wed, 2 Jan 2013 17:37:30 +0000 (17:37 +0000)]
ath9k: disable TX_IQ_ON_AGC_CAL on AR934x, should improve stability
SVN-Revision: 34979
Jo-Philipp Wich [Wed, 2 Jan 2013 16:21:30 +0000 (16:21 +0000)]
sysupgrade: clarify online help
Fixes #12346.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 34975
Jo-Philipp Wich [Wed, 2 Jan 2013 16:21:26 +0000 (16:21 +0000)]
sysupgrade: do not require an extra argument after --restore-backup
Neither --create-backup nor --restore-backup need an image name (following
the backup filename). Treat them in uniform way.
Mostly fixes #12346.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 34974
Felix Fietkau [Wed, 2 Jan 2013 16:09:23 +0000 (16:09 +0000)]
x86: fix typo in alix2/net5501 default packages
SVN-Revision: 34972
Jo-Philipp Wich [Wed, 2 Jan 2013 15:14:19 +0000 (15:14 +0000)]
dnsmasq: allow dhcp host entries without mac addresses (#11928)
SVN-Revision: 34971
Jo-Philipp Wich [Wed, 2 Jan 2013 14:35:43 +0000 (14:35 +0000)]
lldpd: various enhancements
- introduce "list interface" options to specify the ifaces to listen on, takes uci- or network device name
- set the default system description to distrib @ hostname, e.g. "OpenWrt Barrier Breaker r34744 @ vbox"
- introduce "option lldp_description" to override the automatically generated description
SVN-Revision: 34970
John Crispin [Wed, 2 Jan 2013 11:28:21 +0000 (11:28 +0000)]
rt5350 switch support fix
RT5350 frame engine need reset frame engine and embedded switch together.
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
SVN-Revision: 34969
John Crispin [Wed, 2 Jan 2013 11:28:11 +0000 (11:28 +0000)]
Remove remaining etrax references
SVN-Revision: 34968
John Crispin [Wed, 2 Jan 2013 10:29:45 +0000 (10:29 +0000)]
fix typo in HFS kernel module
Signed-off-by: Ian Leonard <antonlacon@gmail.com>
SVN-Revision: 34963
John Crispin [Wed, 2 Jan 2013 10:08:54 +0000 (10:08 +0000)]
fixes libertas firmware install path
fixes #12712
SVN-Revision: 34961
John Crispin [Wed, 2 Jan 2013 09:43:07 +0000 (09:43 +0000)]
fix video modules package generation
The folder layout changed between 3.6 and 3.7
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 34960
Gabor Juhos [Wed, 2 Jan 2013 08:53:07 +0000 (08:53 +0000)]
generic: fix UBIFS build error if XZ compression is disabled
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34959
Steven Barth [Tue, 1 Jan 2013 21:41:37 +0000 (21:41 +0000)]
6relayd: Detect changes of default routes for RAs
SVN-Revision: 34958
Steven Barth [Tue, 1 Jan 2013 21:41:32 +0000 (21:41 +0000)]
ipv6-support: Remove unnecessary code
SVN-Revision: 34957
Gabor Juhos [Tue, 1 Jan 2013 19:04:20 +0000 (19:04 +0000)]
package/kernel: select crypto-sha256 for cifs on 3.7+
Based on a patch from #12711
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34956
Gabor Juhos [Tue, 1 Jan 2013 19:04:17 +0000 (19:04 +0000)]
package/kernel: create separate package for the sha256 crypto module
Based on a patch from #12711
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34955
Gabor Juhos [Tue, 1 Jan 2013 13:15:49 +0000 (13:15 +0000)]
adm5120: add support for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34954
Gabor Juhos [Tue, 1 Jan 2013 13:15:44 +0000 (13:15 +0000)]
adm5120: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34953
Gabor Juhos [Tue, 1 Jan 2013 13:15:41 +0000 (13:15 +0000)]
adm5120: switch to 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34952
Gabor Juhos [Tue, 1 Jan 2013 13:15:36 +0000 (13:15 +0000)]
adm5120: add support for 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34951
Gabor Juhos [Tue, 1 Jan 2013 13:15:30 +0000 (13:15 +0000)]
adm5120: remove NAND_NO_AUTOINCR flag from rb1xx.c
Also add a compatibility patch for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34950
Gabor Juhos [Tue, 1 Jan 2013 13:15:20 +0000 (13:15 +0000)]
adm5120: use mtd_read helper in trxsplit.c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34949
Gabor Juhos [Tue, 1 Jan 2013 13:15:16 +0000 (13:15 +0000)]
adm5120: don't include asm/system.h in adm5120-hcd.c
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34948
Gabor Juhos [Tue, 1 Jan 2013 13:15:11 +0000 (13:15 +0000)]
generic: add missing symbol for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34947
Gabor Juhos [Tue, 1 Jan 2013 13:10:41 +0000 (13:10 +0000)]
ar71xx: register the NAND flash controller device on the AP135/136 boards
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34946
Gabor Juhos [Tue, 1 Jan 2013 13:10:36 +0000 (13:10 +0000)]
ar71xx: allow to register the NAND flash controller on the QCA955x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34945
Gabor Juhos [Tue, 1 Jan 2013 13:10:34 +0000 (13:10 +0000)]
ar71xxx: allow to select ATH79_DEV_NFC for QCA955x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34944
Gabor Juhos [Tue, 1 Jan 2013 13:10:29 +0000 (13:10 +0000)]
ar71xxx: allow to build the ar934x_nfc driver for QCA955x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34943
Gabor Juhos [Tue, 1 Jan 2013 13:10:26 +0000 (13:10 +0000)]
ar71xx: fix NAND controller base for QCA955x SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34942
Gabor Juhos [Tue, 1 Jan 2013 13:10:22 +0000 (13:10 +0000)]
ar71xx: fold AP135 patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34941
Steven Barth [Mon, 31 Dec 2012 09:38:59 +0000 (09:38 +0000)]
ipv6-support: Fix typo in dhcpv6-script * thanks to KarlHegbloom for reporting
SVN-Revision: 34940
John Crispin [Sun, 30 Dec 2012 21:31:10 +0000 (21:31 +0000)]
adds missing symbol
SVN-Revision: 34939
Hauke Mehrtens [Sun, 30 Dec 2012 15:32:53 +0000 (15:32 +0000)]
rtc-rv5c386a: fix compilation for kernel >= 3.4
SVN-Revision: 34938
Hauke Mehrtens [Sun, 30 Dec 2012 15:28:28 +0000 (15:28 +0000)]
acx-mac80211: fix compilation
Some header files from mac80211 are now moved to the uapi dir.
SVN-Revision: 34937
Felix Fietkau [Sun, 30 Dec 2012 14:58:37 +0000 (14:58 +0000)]
uci: disable parallel builds again, the lua<->libuci dependency is not safe
SVN-Revision: 34936
John Crispin [Sun, 30 Dec 2012 12:38:40 +0000 (12:38 +0000)]
fixes usb port on arv 4518
SVN-Revision: 34935
Gabor Juhos [Sun, 30 Dec 2012 08:23:48 +0000 (08:23 +0000)]
ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34934
Gabor Juhos [Sat, 29 Dec 2012 17:50:40 +0000 (17:50 +0000)]
ramips: build firmware image for the Planex MZK-W300NH2 Router
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34927
Gabor Juhos [Sat, 29 Dec 2012 17:50:38 +0000 (17:50 +0000)]
ramips: add user-space support for the Planex MZK-W300NH2 Router
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34926
Gabor Juhos [Sat, 29 Dec 2012 17:50:35 +0000 (17:50 +0000)]
ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router
This is a Japanese market router, for details check
http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB
RAM, but base OpenWRT install worked fine for days without issues.
Even an image with built-in Luci worked, but don't expect smooth
experience, due to the lack of RAM. Wifi was not extensively tested,
but seems it is working. GPIO LEDs & buttons, factory flash image and
switch config are confirmed working. Tested against revision 34882 +
this patch.
[juhosg: move user-space support and image generation changes into
separate patches]
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34925
Gabor Juhos [Sat, 29 Dec 2012 17:50:34 +0000 (17:50 +0000)]
ramips: build image for Airlive AIR3GII
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34924
Gabor Juhos [Sat, 29 Dec 2012 17:50:32 +0000 (17:50 +0000)]
ramips: add user-space support for Airlive AIR3GII
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34923
Gabor Juhos [Sat, 29 Dec 2012 17:50:28 +0000 (17:50 +0000)]
ramips: rt305x: add kernel support for AirLive AIR3GII
AirLive AIR3GII is Ralink RT5350F based device with
100Mbps switch, USB port, 4MB flash and 32MB ram.
Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button
[ 13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected.
[ 13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
Other problem: LAN leds is reverse (lights when not cable
connected and vice versa)
[juhosg: move user-space support and image generation changes into
separate patches]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34922
Gabor Juhos [Sat, 29 Dec 2012 16:02:31 +0000 (16:02 +0000)]
ar71xx: add support for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34920
Gabor Juhos [Sat, 29 Dec 2012 16:02:28 +0000 (16:02 +0000)]
ar71xx: Build the AP135 images
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34919
Gabor Juhos [Sat, 29 Dec 2012 16:02:27 +0000 (16:02 +0000)]
ar71xx: Add userspace support for AP135
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34918
Gabor Juhos [Sat, 29 Dec 2012 16:02:24 +0000 (16:02 +0000)]
ar71xx: Add support for AP135
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34917
Gabor Juhos [Sat, 29 Dec 2012 13:52:38 +0000 (13:52 +0000)]
ar71xx: use a backported patch to fix AR933x UART baud rate calculation
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34915
Felix Fietkau [Sat, 29 Dec 2012 11:12:31 +0000 (11:12 +0000)]
cmake.mk: add support for overriding the source dir, and define the cmake prefix path to avoid picking up host libraries for target builds (patch by Henning Rogge)
SVN-Revision: 34914
Steven Barth [Sat, 29 Dec 2012 10:12:31 +0000 (10:12 +0000)]
ipv6-support: Use more consistent default values
SVN-Revision: 34913
Felix Fietkau [Fri, 28 Dec 2012 21:30:24 +0000 (21:30 +0000)]
ar71xx: change the unaligned access hack to assume an alignment of 2 bytes, slightly improves performance and code size
SVN-Revision: 34912
Felix Fietkau [Fri, 28 Dec 2012 21:05:57 +0000 (21:05 +0000)]
mac80211: refresh patches
SVN-Revision: 34911
Felix Fietkau [Fri, 28 Dec 2012 21:05:49 +0000 (21:05 +0000)]
mac80211: assume 2-byte aligning for 802.11 packets, slightly improves code size and performance
SVN-Revision: 34910
Felix Fietkau [Fri, 28 Dec 2012 19:17:19 +0000 (19:17 +0000)]
mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration
SVN-Revision: 34909
Steven Barth [Fri, 28 Dec 2012 12:02:22 +0000 (12:02 +0000)]
ipv6-support: Updated functionality * Add site-border feature again * Add option to always announce a default router
SVN-Revision: 34908
Steven Barth [Fri, 28 Dec 2012 12:02:17 +0000 (12:02 +0000)]
6distributed: Add null-route for delegated prefix * Fixes forwarding loops for unused subprefixes
SVN-Revision: 34907
Steven Barth [Fri, 28 Dec 2012 12:02:12 +0000 (12:02 +0000)]
6relayd: Announce DNS search domain via DHCPv6
SVN-Revision: 34906
Felix Fietkau [Thu, 27 Dec 2012 22:59:51 +0000 (22:59 +0000)]
kernel: remove the cisco SIP NAT patch, at least on 3.6 it crashes
SVN-Revision: 34901
Hauke Mehrtens [Thu, 27 Dec 2012 19:18:40 +0000 (19:18 +0000)]
brcm47xx: bcma: correct M25P32 serial flash ID
Thank you Rafał Miłecki.
SVN-Revision: 34900
Felix Fietkau [Thu, 27 Dec 2012 17:37:10 +0000 (17:37 +0000)]
uci: update to latest version (adds list delete support), enable parallel build
SVN-Revision: 34899
Steven Barth [Thu, 27 Dec 2012 15:47:53 +0000 (15:47 +0000)]
ipv6-support: Remove site-border feature * was causing routing problems * will be reimplemented using firewall
SVN-Revision: 34898
Steven Barth [Thu, 27 Dec 2012 15:47:47 +0000 (15:47 +0000)]
Remove site-border routing filter due to problems
SVN-Revision: 34897
Steven Barth [Thu, 27 Dec 2012 14:10:17 +0000 (14:10 +0000)]
ipv6-support: * Automatically detect and propagate MTU from upstream interfaces * Add site-border feature (RFC 6204, ULA-4) * Fix a typo
SVN-Revision: 34896
Steven Barth [Thu, 27 Dec 2012 14:10:12 +0000 (14:10 +0000)]
6distributed: feature update * Add feature to decrease IPv6-specific MTU on-demand * Add commands to enable / disable a site-border
SVN-Revision: 34895
Steven Barth [Thu, 27 Dec 2012 14:10:07 +0000 (14:10 +0000)]
6relayd: Advertise IPv6-specific MTU instead of generic * Fixes announced MTU when using tunnels
SVN-Revision: 34894
Steven Barth [Thu, 27 Dec 2012 14:10:01 +0000 (14:10 +0000)]
base-files: Fix a typo in config_list_foreach
SVN-Revision: 34893
Gabor Juhos [Wed, 26 Dec 2012 10:40:54 +0000 (10:40 +0000)]
mpc83xx: add support for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34892
Gabor Juhos [Wed, 26 Dec 2012 10:40:51 +0000 (10:40 +0000)]
mpc83xx: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34891
projects / openwrt / staging / stintel.git / log