git.openwrt.org Git - openwrt/staging/blogic.git/log

net: netlink: rename NETLINK_DUMP_STRICT_CHK -> NETLINK_GET_STRICT_CHK

NETLINK_DUMP_STRICT_CHK can be used for all GET requests,
dumps as well as doit handlers. Replace the DUMP in the
name with GET make that clearer.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qed: Fix command number mismatch between driver and the mfw

The value for OEM_CFG_UPDATE command differs between driver and the
Management firmware (mfw). Fix this gap with adding a reserved field.

Fixes: cac6f691546b ("qed: Add support for Unified Fabric Port.")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mlx5-fixes-2018-12-13' of git://git./linux/kernel/git/saeed/linux

mlx5-fixes-2018-12-13

Subject: [pull request][net 0/9] Mellanox, mlx5 fixes 2018-12-13
Saeed Mahameed says:

====================
This series introduces some fixes to the mlx5 core and mlx5e netdevice
driver.

=======
Conflict with net-next: When merged with net-next this series will
cause a moderate conflict:

1) in drivers/net/ethernet/mellanox/mlx5/core/en_tc.c (2 hunks)
Take hunks from net only and just replace *attr->mirror_count to *attr->split_count
1.1) there is one more instance of slow_attr->mirror_count to be replaced
with slow_attr->split_count, it doesn't appear in the conflict, it will
cause a compilation error if left out.
2) in mlx5_ifc.h, take hunks only from net.

Example for the merge resolution can be found at:
https://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git/commit/?h=merge/mlx5-fixes&id=48830adf29804d85d77ed8a251d625db0eb5b8a8
branch merge/mlx5-fixes of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
(I simply merged this pull request tag into net-next and resolved the conflict)

I don't know if it's ok with you, but to save your time, you can just:
git pull git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux merge/mlx5-fixes
Into net-next, before your next net merge, and you will have a clean
merge of net into net-next (at least for mlx5 files).
======

Please pull and let me know if there's any problem.

For -stable v4.18
338d615be484 ('net/mlx5e: Cancel DIM work on close SQ')
91f40f9904ad ('net/mlx5e: RX, Verify MPWQE stride size is in range')

For -stable v4.19
c5c7e1c41bbe ('net/mlx5e: Remove unused UDP GSO remaining counter')
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: Cancel DIM work on close SQ

TXQ SQ closure is followed by closing the corresponding CQ. A pending
DIM work would try to modify the now non-existing CQ.
This would trigger an error:
[85535.835926] mlx5_core 0000:af:00.0: mlx5_cmd_check:769:(pid 124399):
MODIFY_CQ(0x403) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1d7771)

Fix by making sure to cancel any pending DIM work before destroying the SQ.

Fixes: cbce4f444798 ("net/mlx5e: Enable adaptive-TX moderation")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Remove unused UDP GSO remaining counter

Remove tx_udp_seg_rem counter from ethtool output, as it is no longer
being updated in the driver's data flow.

Fixes: 3f44899ef2ce ("net/mlx5e: Use PARTIAL_GSO for UDP segmentation")
Signed-off-by: Mikhael Goikhman <migo@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Avoid encap flows deletion attempt the 1st time a neigh is resolved

Currently, we are deleting offloaded encap flows in case the relevant neigh
becomes unconnected while the encap is valid (a sign that it used to be
connected), or if the curr neigh mac is different from the cached mac
(a sign that the remote side changed their mac).

The 2nd check also applies when the neigh becomes connected on the 1st
time (we start with zero mac). Before the offending commit, the deleting
handler was practically no op, as no flows were offloaded. But since
that commit, we offload neigh-less encap flows to slow path.

Under mirroring scheme, we go into the delete handler, attempt to unoffload a
mirror rule which was never set (as we were offloading to slow path) and crash.

Fix that by calling the delete handler only when the encap is valid,
which covers both cases mentioned above.

Fixes: 5dbe906ff1d5 ('net/mlx5e: Use a slow path rule instead if vxlan neighbour isn't available')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Properly initialize flow attributes for slow path eswitch rule deletion

When a neighbour is resolved, we delete the goto slow path rule from HW.

The eswitch flow attributes where not properly initialized on that case,
hence we mess up the eswitch refcounts for chain zero (the default one).

Fix that along with making sure to use semicolons and not commas on that code;

Fixes: 5dbe906ff1d5 ('net/mlx5e: Use a slow path rule instead if vxlan neighbour isn't available')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Avoid overriding the user provided priority for offloaded tc rules

Just a leftover which was wrongly left there, remove it while spawning
a message to suggest firmware upgrade.

Fixes: bf07aa730a04 ('net/mlx5e: Support offloading tc priorities and chains for eswitch flows')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Err if asked to mirror a goto chain tc eswitch rule

Currently we are not supporting this and not err-ing on that either.

For now, just err if asked to do that.

Fixes: bf07aa730a04 ('net/mlx5e: Support offloading tc priorities and chains for eswitch flows')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: RX, Verify MPWQE stride size is in range

Add check of MPWQE stride size is within range supported by HW. In case
calculated MPWQE stride size exceed range, linear SKB can't be used and
we should use non linear MPWQE instead.

Fixes: 619a8f2a42f1 ("net/mlx5e: Use linear SKB in Striding RQ")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: Fix default amount of channels for VF representors

The default amount of channels a representor opens was erroneously
changed from one to the maximum amount of channels, restore to its
intended value.

Fixes: 779d986d60de ("net/mlx5e: Do not ignore netdevice TX/RX queues number")
Signed-off-by: Gavi Teitz <gavi@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-Switch, Fix fdb cap bits swap

The cap bits locations for the fdb caps of multi path to table (used for
local mirroring) and multi encap (used for prio/chains) were wrongly used
in swapped locations. This went unnoted so far b/c we tested the offending
patch with CX5 FW that supports both of them. On different environments where
not both caps are supported, we will be messed up, fix that.

Fixes: b9aa0ba17af5 ('net/mlx5: Add cap bits for multi fdb encap')
Signed-off-by: Vu Pham <vu@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Tested-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Merge branch 'vhost-fixes'

Jason Wang says:

====================
Fix various issue of vhost

This series tries to fix various issues of vhost:

- Patch 1 adds a missing write barrier between used idx updating and
  logging.
- Patch 2-3 brings back the protection of device IOTLB through vq
  mutex, this fixes possible use after free in device IOTLB entries.

Please consider them for -stable.

Changes from V2:
- drop dirty page fix and make it for net-next
Changes from V1:
- silent compiler warning for 32bit.
- use mutex_trylock() on slowpath instead of mutex_lock() even on fast
  path.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "net: vhost: lock the vqs one by one"

This reverts commit 78139c94dc8c96a478e67dab3bee84dc6eccb5fd. We don't
protect device IOTLB with vq mutex, which will lead e.g use after free
for device IOTLB entries. And since we've switched to use
mutex_trylock() in previous patch, it's safe to revert it without
having deadlock.

Fixes: commit 78139c94dc8c ("net: vhost: lock the vqs one by one")
Cc: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost_net: switch to use mutex_trylock() in vhost_net_busy_poll()

We used to hold the mutex of paired virtqueue in
vhost_net_busy_poll(). But this will results an inconsistent lock
order which may cause deadlock if we try to bring back the protection
of device IOTLB with vq mutex that requires to hold mutex of all
virtqueues at the same time.

Fix this simply by switching to use mutex_trylock(), when fail just
skip the busy polling. This can happen when device IOTLB is under
updating which should be rare.

Fixes: commit 78139c94dc8c ("net: vhost: lock the vqs one by one")
Cc: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost: make sure used idx is seen before log in vhost_add_used_n()

We miss a write barrier that guarantees used idx is updated and seen
before log. This will let userspace sync and copy used ring before
used idx is update. Fix this by adding a barrier before log_write().

Fixes: 8dd014adfea6f ("vhost-net: mergeable buffers support")
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '40GbE' of git://git./linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Fixes 2018-12-12

This series contains fixes to i40e and ixgbe.

Stefan Assmann fixes an issue created by a previous fix, where
ether_addr_copy() was moved to avoid a race but did not take into
account that it alters the MAC address being handed to
i40e_del_mac_filter().

Michał Mirosław provides 2 fixes for i40e, first resolves issues in the
hardware VLAN offload where VLAN.TCI equal to 0 was being dropped and a
race between disabling VLAN receive feature in hardware and processing
the receive queue, where packets could have their VLAN information
dropped.

Ross Lagerwall fixes a racy condition during a ixgbe VF reset, where
writing the register to issue a reset and sending the reset message via
the mailbox API could result of the mailbox memory getting cleared
during the reset before the message gets successfully sent which results
in a VF driver malfunction.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix warnings suspicious rcu usage when handling base chain
   statistics, from Taehee Yoo.

2) Refetch pointer to tcp header from nf_ct_sack_adjust() since
   skb_make_writable() may reallocate data area, reported by Google
   folks patch from Florian.

3) Incorrect netlink nest end after previous cancellation from error
   path in ipset, from Pan Bian.

4) Use dst_hold_safe() from nf_xfrm_me_harder(), from Florian.

5) Use rb_link_node_rcu() for rcu-protected rbtree node in
   nf_conncount, from Taehee Yoo.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bnx2x-Fix-series'

Sudarsana Reddy Kalluru says:

====================
bnx2x: Fix series

The patch series addresses few important issues in the bnx2x driver.
Please consider applying it 'net' tree.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Send update-svid ramrod with retry/poll flags enabled

Driver sends update-SVID ramrod in the MFW notification path.
If there is a pending ramrod, driver doesn't retry the command
and storm firmware will never be updated with the SVID value.
The patch adds changes to send update-svid ramrod in process context with
retry/poll flags set.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Enable PTP only on the PF that initializes the port

There will be only one PHC clock per port. PTP should be enabled only on
one PF per port. The change enables PTP functionality on the PF that
initializes the port. The change is useful in multi-function modes e.g.,
NPAR where a port can have more than one PF.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Remove configured vlans as part of unload sequence.

Vlans are not getting removed when drivers are unloaded. The recent storm
firmware versions had added safeguards against re-configuring an already
configured vlan. As a result, PF inner reload flows (e.g., mtu change)
might trigger an assertion.
This change is going to remove vlans (same as we do for MACs) when doing
a chip cleanup during unload.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Clear fip MAC when fcoe offload support is disabled

On some customer setups it was observed that shmem contains a non-zero fip
MAC for 57711 which would lead to enabling of SW FCoE.
Add a software workaround to clear the bad fip mac address if no FCoE
connections are supported.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: nf_conncount: use rb_link_node_rcu() instead of rb_link_node()

rbnode in insert_tree() is rcu protected pointer.
So, in order to handle this pointer, _rcu function should be used.
rb_link_node_rcu() is a rcu version of rb_link_node().

Fixes: 34848d5c896e ("netfilter: nf_conncount: Split insert and traversal")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nat: can't use dst_hold on noref dst

The dst entry might already have a zero refcount, waiting on rcu list
to be free'd.  Using dst_hold() transitions its reference count to 1, and
next dst release will try to free it again -- resulting in a double free:

  WARNING: CPU: 1 PID: 0 at include/net/dst.h:239 nf_xfrm_me_harder+0xe7/0x130 [nf_nat]
  RIP: 0010:nf_xfrm_me_harder+0xe7/0x130 [nf_nat]
  Code: 48 8b 5c 24 60 65 48 33 1c 25 28 00 00 00 75 53 48 83 c4 68 5b 5d 41 5c c3 85 c0 74 0d 8d 48 01 f0 0f b1 0a 74 86 85 c0 75 f3 <0f> 0b e9 7b ff ff ff 29 c6 31 d2 b9 20 00 48 00 4c 89 e7 e8 31 27
  Call Trace:
  nf_nat_ipv4_out+0x78/0x90 [nf_nat_ipv4]
  nf_hook_slow+0x36/0xd0
  ip_output+0x9f/0xd0
  ip_forward+0x328/0x440
  ip_rcv+0x8a/0xb0

Use dst_hold_safe instead and bail out if we cannot take a reference.

Fixes: a4c2fd7f7891 ("net: remove DST_NOCACHE flag")
Reported-by: Martin Zaharinov <micron10@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: do not call ipset_nest_end after nla_nest_cancel

In the error handling block, nla_nest_cancel(skb, atd) is called to
cancel the nest operation. But then, ipset_nest_end(skb, atd) is
unexpected called to end the nest operation. This patch calls the
ipset_nest_end only on the branch that nla_nest_cancel is not called.

Fixes: 45040978c899 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

ixgbe: Fix race when the VF driver does a reset

When the VF driver does a reset, it (at least the Linux one) writes to
the VFCTRL register to issue a reset and then immediately sends a reset
message using the mailbox API. This is racy because when the PF driver
detects that the VFCTRL register reset pin has been asserted, it clears
the mailbox memory. Depending on ordering, the reset message sent by
the VF could be cleared by the PF driver. It then responds to the
cleared message with a NACK which causes the VF driver to malfunction.
Fix this by deferring clearing the mailbox memory until the reset
message is received.

Fixes: 939b701ad633 ("ixgbe: fix driver behaviour after issuing VFLR")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

i40e: DRY rx_ptype handling code

Move rx_ptype extracting to i40e_process_skb_fields() to avoid
duplicating the code.

Signed-off-by: Michał Mirosław <michal.miroslaw@atendesoftware.pl>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data

The function hso_probe reads if_num from the USB device (as an u8) and uses
it without a length check to index an array, resulting in an OOB memory read
in hso_probe or hso_get_config_data.

Add a length check for both locations and updated hso_probe to bail on
error.

This issue has been assigned CVE-2018-19985.

Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Mathias Payer <mathias.payer@nebelwelt.net>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

i40e: fix VLAN.TCI == 0 RX HW offload

This fixes two bugs in hardware VLAN offload:
1. VLAN.TCI == 0 was being dropped
2. there was a race between disabling of VLAN RX feature in hardware
and processing RX queue, where packets processed in this window
could have their VLAN information dropped

Fix moves the VLAN handling into i40e_process_skb_fields() to save on
duplicated code. i40e_receive_skb() becomes trivial and so is removed.

Signed-off-by: Michał Mirosław <michal.miroslaw@atendesoftware.pl>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

i40e: fix mac filter delete when setting mac address

A previous commit moved the ether_addr_copy() in i40e_set_mac() before
the mac filter del/add to avoid a race. However it wasn't taken into
account that this alters the mac address being handed to
i40e_del_mac_filter().

Also changed i40e_add_mac_filter() to operate on netdev->dev_addr,
hopefully that makes the code easier to read.

Fixes: 458867b2ca0c ("i40e: don't remove netdev->dev_addr when syncing uc list")
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

r8169: fix crash if CONFIG_DEBUG_SHIRQ is enabled

If CONFIG_DEBUG_SHIRQ is enabled __free_irq() intentionally fires
a spurious interrupt. This interrupt causes a crash because
tp->dev->phydev is NULL at that time.

Fixes: 38caff5a445b ("r8169: handle all interrupt events in the hard irq handler")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ieee802154-for-davem-2018-12-11' of git://git./linux/kernel/git/sschmidt/wpan

Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2018-12-11

An update from ieee802154 for your *net* tree.

Just two more fixes for ieee802154 dribver before the final 4.20 release.
Alexander Aring fixes a problem in the nested parsing code of the
hwsim driver interface.
A fix for a potential overflow in the ca8210 driver by Yue Habing.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ieee802154: ca8210: fix possible u8 overflow in ca8210_rx_done

gcc warning this:

drivers/net/ieee802154/ca8210.c:730:10: warning:
comparison is always false due to limited range of data type [-Wtype-limits]

'len' is u8 type, we get it from buf[1] adding 2, which can overflow.
This patch change the type of 'len' to unsigned int to avoid this,also fix
the gcc warning.

Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

nfp: flower: ensure TCP flags can be placed in IPv6 frame

Previously we did not ensure tcp flags have a place to be stored
when using IPv6. We correct this by including IPv6 key layer when
we match tcp flags and the IPv6 key layer has not been included
already.

Fixes: 07e1671cfca5 ("nfp: flower: refactor shared ip header in match offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ibmvnic-Fix-reset-work-item-locking-bugs'

Thomas Falcon says:

====================
net/ibmvnic: Fix reset work item locking bugs

This patch set fixes issues with scheduling reset work items in
a tasklet context. Since ibmvnic_reset can called in an interrupt,
it should not use a mutex or allocate memory non-atomically.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Fix non-atomic memory allocation in IRQ context

ibmvnic_reset allocated new reset work item objects in a non-atomic
context. This can be called from a tasklet, generating the output below.
Allocate work items with the GFP_ATOMIC flag instead.

BUG: sleeping function called from invalid context at mm/slab.h:421
in_atomic(): 1, irqs_disabled(): 1, pid: 93, name: kworker/0:2
INFO: lockdep is turned off.
irq event stamp: 66049
hardirqs last enabled at (66048): [<c000000000122468>] tasklet_action_common.isra.12+0x78/0x1c0
hardirqs last disabled at (66049): [<c000000000befce8>] _raw_spin_lock_irqsave+0x48/0xf0
softirqs last enabled at (66044): [<c000000000a8ac78>] dev_deactivate_queue.constprop.28+0xc8/0x160
softirqs last disabled at (66045): [<c0000000000306e0>] call_do_softirq+0x14/0x24
CPU: 0 PID: 93 Comm: kworker/0:2 Kdump: loaded Not tainted 4.20.0-rc6-00001-g1b50a8f03706 #7
Workqueue: events linkwatch_event
Call Trace:
[c0000003fffe7ae0] [c000000000bc83e4] dump_stack+0xe8/0x164 (unreliable)
[c0000003fffe7b30] [c00000000015ba0c] ___might_sleep+0x2dc/0x320
[c0000003fffe7bb0] [c000000000391514] kmem_cache_alloc_trace+0x3e4/0x440
[c0000003fffe7c30] [d000000005b2309c] ibmvnic_reset+0x16c/0x360 [ibmvnic]
[c0000003fffe7cc0] [d000000005b29834] ibmvnic_tasklet+0x1054/0x2010 [ibmvnic]
[c0000003fffe7e00] [c0000000001224c8] tasklet_action_common.isra.12+0xd8/0x1c0
[c0000003fffe7e60] [c000000000bf1238] __do_softirq+0x1a8/0x64c
[c0000003fffe7f90] [c0000000000306e0] call_do_softirq+0x14/0x24
[c0000003f3967980] [c00000000001ba50] do_softirq_own_stack+0x60/0xb0
[c0000003f39679c0] [c0000000001218a8] do_softirq+0xa8/0x100
[c0000003f39679f0] [c000000000121a74] __local_bh_enable_ip+0x174/0x180
[c0000003f3967a60] [c000000000bf003c] _raw_spin_unlock_bh+0x5c/0x80
[c0000003f3967a90] [c000000000a8ac78] dev_deactivate_queue.constprop.28+0xc8/0x160
[c0000003f3967ad0] [c000000000a8c8b0] dev_deactivate_many+0xd0/0x520
[c0000003f3967b70] [c000000000a8cd40] dev_deactivate+0x40/0x60
[c0000003f3967ba0] [c000000000a5e0c4] linkwatch_do_dev+0x74/0xd0
[c0000003f3967bd0] [c000000000a5e694] __linkwatch_run_queue+0x1a4/0x1f0
[c0000003f3967c30] [c000000000a5e728] linkwatch_event+0x48/0x60
[c0000003f3967c50] [c0000000001444e8] process_one_work+0x238/0x710
[c0000003f3967d20] [c000000000144a48] worker_thread+0x88/0x4e0
[c0000003f3967db0] [c00000000014e3a8] kthread+0x178/0x1c0
[c0000003f3967e20] [c00000000000bfd0] ret_from_kernel_thread+0x5c/0x6c

Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Convert reset work item mutex to spin lock

ibmvnic_reset can create and schedule a reset work item from
an IRQ context, so do not use a mutex, which can sleep. Convert
the reset work item mutex to a spin lock. Locking debugger generated
the trace output below.

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
in_atomic(): 1, irqs_disabled(): 1, pid: 120, name: kworker/8:1
4 locks held by kworker/8:1/120:
#0: 0000000017c05720 ((wq_completion)"events"){+.+.}, at: process_one_work+0x188/0x710
#1: 00000000ace90706 ((linkwatch_work).work){+.+.}, at: process_one_work+0x188/0x710
#2: 000000007632871f (rtnl_mutex){+.+.}, at: rtnl_lock+0x30/0x50
#3: 00000000fc36813a (&(&crq->lock)->rlock){..-.}, at: ibmvnic_tasklet+0x88/0x2010 [ibmvnic]
irq event stamp: 26293
hardirqs last enabled at (26292): [<c000000000122468>] tasklet_action_common.isra.12+0x78/0x1c0
hardirqs last disabled at (26293): [<c000000000befce8>] _raw_spin_lock_irqsave+0x48/0xf0
softirqs last enabled at (26288): [<c000000000a8ac78>] dev_deactivate_queue.constprop.28+0xc8/0x160
softirqs last disabled at (26289): [<c0000000000306e0>] call_do_softirq+0x14/0x24
CPU: 8 PID: 120 Comm: kworker/8:1 Kdump: loaded Not tainted 4.20.0-rc6 #6
Workqueue: events linkwatch_event
Call Trace:
[c0000003fffa7a50] [c000000000bc83e4] dump_stack+0xe8/0x164 (unreliable)
[c0000003fffa7aa0] [c00000000015ba0c] ___might_sleep+0x2dc/0x320
[c0000003fffa7b20] [c000000000be960c] __mutex_lock+0x8c/0xb40
[c0000003fffa7c30] [d000000006202ac8] ibmvnic_reset+0x78/0x330 [ibmvnic]
[c0000003fffa7cc0] [d0000000062097f4] ibmvnic_tasklet+0x1054/0x2010 [ibmvnic]
[c0000003fffa7e00] [c0000000001224c8] tasklet_action_common.isra.12+0xd8/0x1c0
[c0000003fffa7e60] [c000000000bf1238] __do_softirq+0x1a8/0x64c
[c0000003fffa7f90] [c0000000000306e0] call_do_softirq+0x14/0x24
[c0000003f3f87980] [c00000000001ba50] do_softirq_own_stack+0x60/0xb0
[c0000003f3f879c0] [c0000000001218a8] do_softirq+0xa8/0x100
[c0000003f3f879f0] [c000000000121a74] __local_bh_enable_ip+0x174/0x180
[c0000003f3f87a60] [c000000000bf003c] _raw_spin_unlock_bh+0x5c/0x80
[c0000003f3f87a90] [c000000000a8ac78] dev_deactivate_queue.constprop.28+0xc8/0x160
[c0000003f3f87ad0] [c000000000a8c8b0] dev_deactivate_many+0xd0/0x520
[c0000003f3f87b70] [c000000000a8cd40] dev_deactivate+0x40/0x60
[c0000003f3f87ba0] [c000000000a5e0c4] linkwatch_do_dev+0x74/0xd0
[c0000003f3f87bd0] [c000000000a5e694] __linkwatch_run_queue+0x1a4/0x1f0
[c0000003f3f87c30] [c000000000a5e728] linkwatch_event+0x48/0x60
[c0000003f3f87c50] [c0000000001444e8] process_one_work+0x238/0x710
[c0000003f3f87d20] [c000000000144a48] worker_thread+0x88/0x4e0
[c0000003f3f87db0] [c00000000014e3a8] kthread+0x178/0x1c0
[c0000003f3f87e20] [c00000000000bfd0] ret_from_kernel_thread+0x5c/0x6c

Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Fix potential Spectre v1 vulnerability

vr.vifi is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

net/ipv4/ipmr.c:1616 ipmr_ioctl() warn: potential spectre issue 'mrt->vif_table' [r] (local cap)
net/ipv4/ipmr.c:1690 ipmr_compat_ioctl() warn: potential spectre issue 'mrt->vif_table' [r] (local cap)

Fix this by sanitizing vr.vifi before using it to index mrt->vif_table'

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: initialize sin6_flowinfo for ipv6 addrs in sctp_inet6addr_event

syzbot reported a kernel-infoleak, which is caused by an uninitialized
field(sin6_flowinfo) of addr->a.v6 in sctp_inet6addr_event().
The call trace is as below:

  BUG: KMSAN: kernel-infoleak in _copy_to_user+0x19a/0x230 lib/usercopy.c:33
  CPU: 1 PID: 8164 Comm: syz-executor2 Not tainted 4.20.0-rc3+ #95
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
  Google 01/01/2011
  Call Trace:
    __dump_stack lib/dump_stack.c:77 [inline]
    dump_stack+0x32d/0x480 lib/dump_stack.c:113
    kmsan_report+0x12c/0x290 mm/kmsan/kmsan.c:683
    kmsan_internal_check_memory+0x32a/0xa50 mm/kmsan/kmsan.c:743
    kmsan_copy_to_user+0x78/0xd0 mm/kmsan/kmsan_hooks.c:634
    _copy_to_user+0x19a/0x230 lib/usercopy.c:33
    copy_to_user include/linux/uaccess.h:183 [inline]
    sctp_getsockopt_local_addrs net/sctp/socket.c:5998 [inline]
    sctp_getsockopt+0x15248/0x186f0 net/sctp/socket.c:7477
    sock_common_getsockopt+0x13f/0x180 net/core/sock.c:2937
    __sys_getsockopt+0x489/0x550 net/socket.c:1939
    __do_sys_getsockopt net/socket.c:1950 [inline]
    __se_sys_getsockopt+0xe1/0x100 net/socket.c:1947
    __x64_sys_getsockopt+0x62/0x80 net/socket.c:1947
    do_syscall_64+0xcf/0x110 arch/x86/entry/common.c:291
    entry_SYSCALL_64_after_hwframe+0x63/0xe7

sin6_flowinfo is not really used by SCTP, so it will be fixed by simply
setting it to 0.

The issue exists since very beginning.
Thanks Alexander for the reproducer provided.

Reported-by: syzbot+ad5d327e6936a2e284be@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Linux 4.20-rc6

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:
"A decent batch of fixes here. I'd say about half are for problems that
  have existed for a while, and half are for new regressions added in
  the 4.20 merge window.

   1) Fix 10G SFP phy module detection in mvpp2, from Baruch Siach.

   2) Revert bogus emac driver change, from Benjamin Herrenschmidt.

   3) Handle BPF exported data structure with pointers when building
      32-bit userland, from Daniel Borkmann.

   4) Memory leak fix in act_police, from Davide Caratti.

   5) Check RX checksum offload in RX descriptors properly in aquantia
      driver, from Dmitry Bogdanov.

   6) SKB unlink fix in various spots, from Edward Cree.

   7) ndo_dflt_fdb_dump() only works with ethernet, enforce this, from
      Eric Dumazet.

   8) Fix FID leak in mlxsw driver, from Ido Schimmel.

   9) IOTLB locking fix in vhost, from Jean-Philippe Brucker.

  10) Fix SKB truesize accounting in ipv4/ipv6/netfilter frag memory
      limits otherwise namespace exit can hang. From Jiri Wiesner.

  11) Address block parsing length fixes in x25 from Martin Schiller.

  12) IRQ and ring accounting fixes in bnxt_en, from Michael Chan.

  13) For tun interfaces, only iface delete works with rtnl ops, enforce
      this by disallowing add. From Nicolas Dichtel.

  14) Use after free in liquidio, from Pan Bian.

  15) Fix SKB use after passing to netif_receive_skb(), from Prashant
      Bhole.

  16) Static key accounting and other fixes in XPS from Sabrina Dubroca.

  17) Partially initialized flow key passed to ip6_route_output(), from
      Shmulik Ladkani.

  18) Fix RTNL deadlock during reset in ibmvnic driver, from Thomas
      Falcon.

  19) Several small TCP fixes (off-by-one on window probe abort, NULL
      deref in tail loss probe, SNMP mis-estimations) from Yuchung
      Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (93 commits)
  net/sched: cls_flower: Reject duplicated rules also under skip_sw
  bnxt_en: Fix _bnxt_get_max_rings() for 57500 chips.
  bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips.
  bnxt_en: Keep track of reserved IRQs.
  bnxt_en: Fix CNP CoS queue regression.
  net/mlx4_core: Correctly set PFC param if global pause is turned off.
  Revert "net/ibm/emac: wrong bit is used for STA control"
  neighbour: Avoid writing before skb->head in neigh_hh_output()
  ipv6: Check available headroom in ip6_xmit() even without options
  tcp: lack of available data can also cause TSO defer
  ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output
  mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl
  mlxsw: spectrum_router: Relax GRE decap matching check
  mlxsw: spectrum_switchdev: Avoid leaking FID's reference count
  mlxsw: spectrum_nve: Remove easily triggerable warnings
  ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes
  sctp: frag_point sanity check
  tcp: fix NULL ref in tail loss probe
  tcp: Do not underestimate rwnd_limited
  net: use skb_list_del_init() to remove from RX sublists
  ...

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"Three fixes: a boot parameter re-(re-)fix, a retpoline build artifact
  fix and an LLVM workaround"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Drop implicit common-page-size linker flag
  x86/build: Fix compiler support check for CONFIG_RETPOLINE
  x86/boot: Clear RSDP address in boot_params for broken loaders

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull kprobes fixes from Ingo Molnar:
"Two kprobes fixes: a blacklist fix and an instruction patching related
  corruption fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kprobes/x86: Blacklist non-attachable interrupt functions
  kprobes/x86: Fix instruction patching corruption when copying more than one RIP-relative instruction

Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Ingo Molnar:
"Two fixes: a large-system fix and an earlyprintk fix with certain
  resolutions"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/earlyprintk/efi: Fix infinite loop on some screen widths
  x86/efi: Allocate e820 buffer before calling efi_exit_boot_service

net/sched: cls_flower: Reject duplicated rules also under skip_sw

Currently, duplicated rules are rejected only for skip_hw or "none",
hence allowing users to push duplicates into HW for no reason.

Use the flower tables to protect for that.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reported-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bnxt_en-Bug-fixes'

Michael Chan says:

====================
bnxt_en: Bug fixes.

The first patch fixes a regression on CoS queue setup, introduced
recently by the 57500 new chip support patches. The rest are
fixes related to ring and resource accounting on the new 57500 chips.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix _bnxt_get_max_rings() for 57500 chips.

The CP rings are accounted differently on the new 57500 chips. There
must be enough CP rings for the sum of RX and TX rings on the new
chips. The current logic may be over-estimating the RX and TX rings.

The output parameter max_cp should be the maximum NQs capped by
MSIX vectors available for networking in the context of 57500 chips.
The existing code which uses CMPL rings capped by the MSIX vectors
works most of the time but is not always correct.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips.

The new 57500 chips have introduced the NQ structure in addition to
the existing CP rings in all chips.  We need to introduce a new
bnxt_nq_rings_in_use().  On legacy chips, the 2 functions are the
same and one will just call the other.  On the new chips, they
refer to the 2 separate ring structures.  The new function is now
called to determine the resource (NQ or CP rings) associated with
MSIX that are in use.

On 57500 chips, the RDMA driver does not use the CP rings so
we don't need to do the subtraction adjustment.

Fixes: 41e8d7983752 ("bnxt_en: Modify the ring reservation functions for 57500 series chips.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Keep track of reserved IRQs.

The new 57500 chips use 1 NQ per MSIX vector, whereas legacy chips use
1 CP ring per MSIX vector.  To better unify this, add a resv_irqs
field to struct bnxt_hw_resc.  On legacy chips, we initialize resv_irqs
with resv_cp_rings.  On new chips, we initialize it with the allocated
MSIX resources.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix CNP CoS queue regression.

Recent changes to support the 57500 devices have created this
regression. The bnxt_hwrm_queue_qportcfg() call was moved to be
called earlier before the RDMA support was determined, causing
the CoS queues configuration to be set before knowing whether RDMA
was supported or not. Fix it by moving it to the right place right
after RDMA support is determined.

Fixes: 98f04cf0f1fc ("bnxt_en: Check context memory requirements from firmware.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'char-misc-4.20-rc6' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes for 4.20-rc6.

  There is a hyperv fix that for some reaon took forever to get into a
  shape that could be applied to the tree properly, but resolves a much
  reported issue. The others are some gnss patches, one a bugfix and the
  two others updates to the MAINTAINERS file to properly match the gnss
  files in the tree.

  All have been in linux-next for a while with no reported issues"

* tag 'char-misc-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  MAINTAINERS: exclude gnss from SIRFPRIMA2 regex matching
  MAINTAINERS: add gnss scm tree
  gnss: sirf: fix activation retry handling
  Drivers: hv: vmbus: Offload the handling of channels to two workqueues

Merge tag 'staging-4.20-rc6' of git://git./linux/kernel/git/gregkh/staging

Pull staging fixes from Greg KH:
"Here are two staging driver bugfixes for 4.20-rc6.

  One is a revert of a previously incorrect patch that was merged a
  while ago, and the other resolves a possible buffer overrun that was
  found by code inspection.

  Both of these have been in the linux-next tree with no reported
  issues"

* tag 'staging-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Revert commit ef9209b642f "staging: rtl8723bs: Fix indenting errors and an off-by-one mistake in core/rtw_mlme_ext.c"
  staging: rtl8712: Fix possible buffer overrun

Merge tag 'tty-4.20-rc6' of git://git./linux/kernel/git/gregkh/tty

Pull tty driver fixes from Greg KH:
"Here are three small tty driver fixes for 4.20-rc6

  Nothing major, just some bug fixes for reported issues. Full details
  are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  kgdboc: fix KASAN global-out-of-bounds bug in param_set_kgdboc_var()
  tty: serial: 8250_mtk: always resume the device in probe.
  tty: do not set TTY_IO_ERROR flag if console port

Merge tag 'usb-4.20-rc6' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are some small USB fixes for 4.20-rc6

  The "largest" here are some xhci fixes for reported issues. Also here
  is a USB core fix, some quirk additions, and a usb-serial fix which
  required the export of one of the tty layer's functions to prevent
  code duplication. The tty maintainer agreed with this change.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: Prevent U1/U2 link pm states if exit latency is too long
  xhci: workaround CSS timeout on AMD SNPS 3.0 xHC
  USB: check usb_get_extra_descriptor for proper size
  USB: serial: console: fix reported terminal settings
  usb: quirk: add no-LPM quirk on SanDisk Ultra Flair device
  USB: Fix invalid-free bug in port_over_current_notify()
  usb: appledisplay: Add 27" Apple Cinema Display

Merge tag '4.20-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Three small fixes: a fix for smb3 direct i/o, a fix for CIFS DFS for
  stable and a minor cifs Kconfig fix"

* tag '4.20-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Avoid returning EBUSY to upper layer VFS
  cifs: Fix separator when building path from dentry
  cifs: In Kconfig CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs)

Merge tag 'dax-fixes-4.20-rc6' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull dax fixes from Dan Williams:
"The last of the known regression fixes and fallout from the Xarray
  conversion of the filesystem-dax implementation.

  On the path to debugging why the dax memory-failure injection test
  started failing after the Xarray conversion a couple more fixes for
  the dax_lock_mapping_entry(), now called dax_lock_page(), surfaced.
  Those plus the bug that started the hunt are now addressed. These
  patches have appeared in a -next release with no issues reported.

  Note the touches to mm/memory-failure.c are just the conversion to the
  new function signature for dax_lock_page().

  Summary:

   - Fix the Xarray conversion of fsdax to properly handle
     dax_lock_mapping_entry() in the presense of pmd entries

   - Fix inode destruction racing a new lock request"

* tag 'dax-fixes-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: Fix unlock mismatch with updated API
  dax: Don't access a freed inode
  dax: Check page->mapping isn't NULL

Merge tag 'libnvdimm-fixes-4.20-rc6' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
"A regression fix for the Address Range Scrub implementation, yes
  another one, and support for platforms that misalign persistent memory
  relative to the Linux memory hotplug section constraint. Longer term,
  support for sub-section memory hotplug would alleviate alignment
  waste, but until then this hack allows a 'struct page' memmap to be
  established for these misaligned memory regions.

  These have all appeared in a -next release, and thanks to Patrick for
  reporting and testing the alignment padding fix.

  Summary:

   - Unless and until the core mm handles memory hotplug units smaller
     than a section (128M), persistent memory namespaces must be padded
     to section alignment.

     The libnvdimm core already handled section collision with "System
     RAM", but some configurations overlap independent "Persistent
     Memory" ranges within a section, so additional padding injection is
     added for that case.

   - The recent reworks of the ARS (address range scrub) state machine
     to reduce the number of state flags inadvertantly missed a
     conversion of acpi_nfit_ars_rescan() call sites. Fix the regression
     whereby user-requested ARS results in a "short" scrub rather than a
     "long" scrub.

   - Fixup the unit tests to handle / test the 128M section alignment of
     mocked test resources.

* tag 'libnvdimm-fixes-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  acpi/nfit: Fix user-initiated ARS to be "ARS-long" rather than "ARS-short"
  libnvdimm, pfn: Pad pfn namespaces relative to other regions
  tools/testing/nvdimm: Align test resources to 128M

net/mlx4_core: Correctly set PFC param if global pause is turned off.

rx_ppp and tx_ppp can be set between 0 and 255, so don't clamp to 1.

Fixes: 6e8814ceb7e8 ("net/mlx4_en: Fix mixed PFC and Global pause user control requests")
Signed-off-by: Tarick Bedeir <tarick@google.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'fixes' of git://git./linux/kernel/git/evalenti/linux-soc-thermal

Pull thermal SoC fixes from Eduardo Valentin:
"Fixes for armada and broadcom thermal drivers"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: broadcom: constify thermal_zone_of_device_ops structure
  thermal: armada: constify thermal_zone_of_device_ops structure
  thermal: bcm2835: Switch to SPDX identifier
  thermal: armada: fix legacy resource fixup
  thermal: armada: fix legacy validity test sense

Merge tag 'asm-generic-4.20' of git://git./linux/kernel/git/arnd/asm-generic

Pull asm-generic fix from Arnd Bergmann:
"Multiple people reported a bug I introduced in asm-generic/unistd.h in
  4.20, this is the obvious bugfix to get glibc and others to correctly
  build again on new architectures that no longer provide the old
  fstatat64() family of system calls"

* tag 'asm-generic-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: unistd.h: fixup broken macro include.

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"A few clk driver fixes this time:

   - Introduce protected-clock DT binding to fix breakage on qcom
     sdm845-mtp boards where the qspi clks introduced this merge window
     cause the firmware on those boards to take down the system if we
     try to read the clk registers

   - Fix a couple off-by-one errors found by Dan Carpenter

   - Handle failure in zynq fixed factor clk driver to avoid using
     uninitialized data"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: zynqmp: Off by one in zynqmp_is_valid_clock()
  clk: mmp: Off by one in mmp_clk_add()
  clk: mvebu: Off by one bugs in cp110_of_clk_get()
  arm64: dts: qcom: sdm845-mtp: Mark protected gcc clocks
  clk: qcom: Support 'protected-clocks' property
  dt-bindings: clk: Introduce 'protected-clocks' property
  clk: zynqmp: handle fixed factor param query error

Merge tag 'xfs-4.20-fixes-3' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
"Here are hopefully the last set of fixes for 4.20.

  There's a fix for a longstanding statfs reporting problem with project
  quotas, a correction for page cache invalidation behaviors when
  fallocating near EOF, and a fix for a broken metadata verifier return
  code.

  Finally, the most important fix is to the pipe splicing code (aka the
  generic copy_file_range fallback) to avoid pointless short directio
  reads by only asking the filesystem for as much data as there are
  available pages in the pipe buffer. Our previous fix (simulated short
  directio reads because the number of pages didn't match the length of
  the read requested) caused subtle problems on overlayfs, so that part
  is reverted.

  Anyhow, this series passes fstests -g all on xfs and overlay+xfs, and
  has passed 17 billion fsx operations problem-free since I started
  testing

  Summary:

   - Fix broken project quota inode counts

   - Fix incorrect PAGE_MASK/PAGE_SIZE usage

   - Fix incorrect return value in btree verifier

   - Fix WARN_ON remap flags false positive

   - Fix splice read overflows"

* tag 'xfs-4.20-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: partially revert 4721a601099 (simulated directio short read on EFAULT)
  splice: don't read more than available pipe space
  vfs: allow some remap flags to be passed to vfs_clone_file_range
  xfs: fix inverted return from xfs_btree_sblock_verify_crc
  xfs: fix PAGE_MASK usage in xfs_free_file_space
  fs/xfs: fix f_ffree value for statfs when project quota is set

Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask"

This reverts commit 89c83fb539f95491be80cdd5158e6f0ce329e317.

This should have been done as part of 2f0799a0ffc0 ("mm, thp: restore
node-local hugepage allocations").  The movement of the thp allocation
policy from alloc_pages_vma() to alloc_hugepage_direct_gfpmask() was
intended to only set __GFP_THISNODE for mempolicies that are not
MPOL_BIND whereas the revert could set this regardless of mempolicy.

While the check for MPOL_BIND between alloc_hugepage_direct_gfpmask()
and alloc_pages_vma() was racy, that has since been removed since the
revert.  What is left is the possibility to use __GFP_THISNODE in
policy_node() when it is unexpected because the special handling for
hugepages in alloc_pages_vma()  was removed as part of the consolidation.

Secondly, prior to 89c83fb539f9, alloc_pages_vma() implemented a somewhat
different policy for hugepage allocations, which were allocated through
alloc_hugepage_vma().  For hugepage allocations, if the allocating
process's node is in the set of allowed nodes, allocate with
__GFP_THISNODE for that node (for MPOL_PREFERRED, use that node with
__GFP_THISNODE instead).  This was changed for shmem_alloc_hugepage() to
allow fallback to other nodes in 89c83fb539f9 as it did for new_page() in
mm/mempolicy.c which is functionally different behavior and removes the
requirement to only allocate hugepages locally.

So this commit does a full revert of 89c83fb539f9 instead of the partial
revert that was done in 2f0799a0ffc0.  The result is the same thp
allocation policy for 4.20 that was in 4.19.

Fixes: 89c83fb539f9 ("mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask")
Fixes: 2f0799a0ffc0 ("mm, thp: restore node-local hugepage allocations")
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "net/ibm/emac: wrong bit is used for STA control"

This reverts commit 624ca9c33c8a853a4a589836e310d776620f4ab9.

This commit is completely bogus. The STACR register has two formats, old
and new, depending on the version of the IP block used. There's a pair of
device-tree properties that can be used to specify the format used:

has-inverted-stacr-oc
has-new-stacr-staopc

What this commit did was to change the bit definition used with the old
parts to match the new parts. This of course breaks the driver on all
the old ones.

Instead, the author should have set the appropriate properties in the
device-tree for the variant used on his board.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'skb-headroom-slab-out-of-bounds'

Stefano Brivio says:

====================
Fix slab out-of-bounds on insufficient headroom for IPv6 packets

Patch 1/2 fixes a slab out-of-bounds occurring with short SCTP packets over
IPv4 over L2TP over IPv6 on a configuration with relatively low HEADER_MAX.

Patch 2/2 makes sure we avoid writing before the allocated buffer in
neigh_hh_output() in case the headroom is enough for the unaligned hardware
header size, but not enough for the aligned one, and that we warn if we hit
this condition.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

neighbour: Avoid writing before skb->head in neigh_hh_output()

While skb_push() makes the kernel panic if the skb headroom is less than
the unaligned hardware header size, it will proceed normally in case we
copy more than that because of alignment, and we'll silently corrupt
adjacent slabs.

In the case fixed by the previous patch,
"ipv6: Check available headroom in ip6_xmit() even without options", we
end up in neigh_hh_output() with 14 bytes headroom, 14 bytes hardware
header and write 16 bytes, starting 2 bytes before the allocated buffer.

Always check we're not writing before skb->head and, if the headroom is
not enough, warn and drop the packet.

v2:
- instead of panicking with BUG_ON(), WARN_ON_ONCE() and drop the packet
   (Eric Dumazet)
- if we avoid the panic, though, we need to explicitly check the headroom
   before the memcpy(), otherwise we'll have corrupted slabs on a running
   kernel, after we warn
- use __skb_push() instead of skb_push(), as the headroom check is
   already implemented here explicitly (Eric Dumazet)

Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Check available headroom in ip6_xmit() even without options

Even if we send an IPv6 packet without options, MAX_HEADER might not be
enough to account for the additional headroom required by alignment of
hardware headers.

On a configuration without HYPERV_NET, WLAN, AX25, and with IPV6_TUNNEL,
sending short SCTP packets over IPv4 over L2TP over IPv6, we start with
100 bytes of allocated headroom in sctp_packet_transmit(), end up with 54
bytes after l2tp_xmit_skb(), and 14 bytes in ip6_finish_output2().

Those would be enough to append our 14 bytes header, but we're going to
align that to 16 bytes, and write 2 bytes out of the allocated slab in
neigh_hh_output().

KASan says:

[  264.967848] ==================================================================
[  264.967861] BUG: KASAN: slab-out-of-bounds in ip6_finish_output2+0x1aec/0x1c70
[  264.967866] Write of size 16 at addr 000000006af1c7fe by task netperf/6201
[  264.967870]
[  264.967876] CPU: 0 PID: 6201 Comm: netperf Not tainted 4.20.0-rc4+ #1
[  264.967881] Hardware name: IBM 2827 H43 400 (z/VM 6.4.0)
[  264.967887] Call Trace:
[  264.967896] ([<00000000001347d6>] show_stack+0x56/0xa0)
[  264.967903]  [<00000000017e379c>] dump_stack+0x23c/0x290
[  264.967912]  [<00000000007bc594>] print_address_description+0xf4/0x290
[  264.967919]  [<00000000007bc8fc>] kasan_report+0x13c/0x240
[  264.967927]  [<000000000162f5e4>] ip6_finish_output2+0x1aec/0x1c70
[  264.967935]  [<000000000163f890>] ip6_finish_output+0x430/0x7f0
[  264.967943]  [<000000000163fe44>] ip6_output+0x1f4/0x580
[  264.967953]  [<000000000163882a>] ip6_xmit+0xfea/0x1ce8
[  264.967963]  [<00000000017396e2>] inet6_csk_xmit+0x282/0x3f8
[  264.968033]  [<000003ff805fb0ba>] l2tp_xmit_skb+0xe02/0x13e0 [l2tp_core]
[  264.968037]  [<000003ff80631192>] l2tp_eth_dev_xmit+0xda/0x150 [l2tp_eth]
[  264.968041]  [<0000000001220020>] dev_hard_start_xmit+0x268/0x928
[  264.968069]  [<0000000001330e8e>] sch_direct_xmit+0x7ae/0x1350
[  264.968071]  [<000000000122359c>] __dev_queue_xmit+0x2b7c/0x3478
[  264.968075]  [<00000000013d2862>] ip_finish_output2+0xce2/0x11a0
[  264.968078]  [<00000000013d9b14>] ip_finish_output+0x56c/0x8c8
[  264.968081]  [<00000000013ddd1e>] ip_output+0x226/0x4c0
[  264.968083]  [<00000000013dbd6c>] __ip_queue_xmit+0x894/0x1938
[  264.968100]  [<000003ff80bc3a5c>] sctp_packet_transmit+0x29d4/0x3648 [sctp]
[  264.968116]  [<000003ff80b7bf68>] sctp_outq_flush_ctrl.constprop.5+0x8d0/0xe50 [sctp]
[  264.968131]  [<000003ff80b7c716>] sctp_outq_flush+0x22e/0x7d8 [sctp]
[  264.968146]  [<000003ff80b35c68>] sctp_cmd_interpreter.isra.16+0x530/0x6800 [sctp]
[  264.968161]  [<000003ff80b3410a>] sctp_do_sm+0x222/0x648 [sctp]
[  264.968177]  [<000003ff80bbddac>] sctp_primitive_ASSOCIATE+0xbc/0xf8 [sctp]
[  264.968192]  [<000003ff80b93328>] __sctp_connect+0x830/0xc20 [sctp]
[  264.968208]  [<000003ff80bb11ce>] sctp_inet_connect+0x2e6/0x378 [sctp]
[  264.968212]  [<0000000001197942>] __sys_connect+0x21a/0x450
[  264.968215]  [<000000000119aff8>] sys_socketcall+0x3d0/0xb08
[  264.968218]  [<000000000184ea7a>] system_call+0x2a2/0x2c0

[...]

Just like ip_finish_output2() does for IPv4, check that we have enough
headroom in ip6_xmit(), and reallocate it if we don't.

This issue is older than git history.

Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: lack of available data can also cause TSO defer

tcp_tso_should_defer() can return true in three different cases :

1) We are cwnd-limited
2) We are rwnd-limited
3) We are application limited.

Neal pointed out that my recent fix went too far, since
it assumed that if we were not in 1) case, we must be rwnd-limited

Fix this by properly populating the is_cwnd_limited and
is_rwnd_limited booleans.

After this change, we can finally move the silly check for FIN
flag only for the application-limited case.

The same move for EOR bit will be handled in net-next,
since commit 1c09f7d073b1 ("tcp: do not try to defer skbs
with eor mark (MSG_EOR)") is scheduled for linux-4.21

Tested by running 200 concurrent netperf -t TCP_RR -- -r 60000,100
and checking none of them was rwnd_limited in the chrono_stat
output from "ss -ti" command.

Fixes: 41727549de3e ("tcp: Do not underestimate rwnd_limited")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull vhost/virtio fixes from Michael Tsirkin:
"A couple of last-minute fixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost/vsock: fix use-after-free in network stack callers
  virtio/s390: fix race in ccw_io_helper()
  virtio/s390: avoid race on vcdev->config
  vhost/vsock: fix reset orphans race with close timeout

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fix from Catalin Marinas:
"Avoid sending IPIs with interrupts disabled"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hibernate: Avoid sending cross-calling with interrupts disabled

Merge tag 'gcc-plugins-v4.20-rc6' of git://git./linux/kernel/git/kees/linux

Pull gcc stackleak plugin fixes from Kees Cook:

- Remove tracing for inserted stack depth marking function (Anders
   Roxell)

- Move gcc-plugin pass location to avoid objtool warnings (Alexander
   Popov)

* tag 'gcc-plugins-v4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  stackleak: Register the 'stackleak_cleanup' pass before the '*free_cfg' pass
  stackleak: Mark stackleak_track_stack() as notrace

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:

- Disable the new crypto stats interface as it's still being changed

- Fix potential uses-after-free in cbc/cfb/pcbc.

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: user - Disable statistics interface
crypto: do not free algorithm before using

Merge tag 'pci-v4.20-fixes-3' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
"Revert ASPM change that caused a regression"

* tag 'pci-v4.20-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI/ASPM: Do not initialize link state when aspm_disabled is set"

ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output

In 'seg6_output', stack variable 'struct flowi6 fl6' was missing
initialization.

Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-linus-20181207' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"Let's try this again...

  We're finally happy with the DM livelock issue, and it's also passed
  overnight testing and the corruption regression test. The end result
  is much nicer now too, which is great.

  Outside of that fix, there's a pull request for NVMe with two small
  fixes, and a regression fix for BFQ from this merge window. The BFQ
  fix looks bigger than it is, it's 90% comment updates"

* tag 'for-linus-20181207' of git://git.kernel.dk/linux-block:
  blk-mq: punt failed direct issue to dispatch list
  nvmet-rdma: fix response use after free
  nvme: validate controller state before rescheduling keep alive
  block, bfq: fix decrement of num_active_groups

Merge branch 'i2c/for-current-fixed' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"A set of driver bugfixes for the I2C subsystem"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: uniphier-f: fix violation of tLOW requirement for Fast-mode
  i2c: uniphier: fix violation of tLOW requirement for Fast-mode
  i2c: uniphier-f: fill TX-FIFO only in IRQ handler for repeated START
  i2c: uniphier-f: fix timeout error after reading 8 bytes
  i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node
  i2c: axxia: properly handle master timeout
  i2c: rcar: check bus state before reinitializing
  i2c: nvidia-gpu: limit reads also for combined messages
  i2c: nvidia-gpu: adhere to I2C fault codes

Merge tag 'dmaengine-fix-4.20-rc6' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:
"Another pull request for dmaengine. We got bunch of fixes early this
  week and all are tagged to stable. Hope this is last fix for this
  cycle:

   - Fix imx-sdma handling of channel terminations, this involves
     reverting two commits and implement async termination

   - Fix cppi dma channel deletion from pending list on stop

   - Fix FIFO size for dw controller in Intel Merrifield"

* tag 'dmaengine-fix-4.20-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: dw: Fix FIFO size for Intel Merrifield
  dmaengine: cppi41: delete channel from pending list when stop channel
  dmaengine: imx-sdma: use GFP_NOWAIT for dma descriptor allocations
  dmaengine: imx-sdma: implement channel termination via worker
  Revert "dmaengine: imx-sdma: alloclate bd memory from dma pool"
  Revert "dmaengine: imx-sdma: Use GFP_NOWAIT for dma allocations"

x86/vdso: Drop implicit common-page-size linker flag

GNU linker's -z common-page-size's default value is based on the target
architecture. arch/x86/entry/vdso/Makefile sets it to the architecture
default, which is implicit and redundant. Drop it.

Fixes: 2aae950b21e4 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu")
Reported-by: Dmitry Golovin <dima@golovin.in>
Reported-by: Bill Wendling <morbo@google.com>
Suggested-by: Dmitry Golovin <dima@golovin.in>
Suggested-by: Rui Ueyama <ruiu@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Fangrui Song <maskray@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181206191231.192355-1-ndesaulniers@google.com
Link: https://bugs.llvm.org/show_bug.cgi?id=38774
Link: https://github.com/ClangBuiltLinux/linux/issues/31

arm64: hibernate: Avoid sending cross-calling with interrupts disabled

Since commit 3b8c9f1cdfc50 ("arm64: IPI each CPU after invalidating the
I-cache for kernel mappings"), a call to flush_icache_range() will use
an IPI to cross-call other online CPUs so that any stale instructions
are flushed from their pipelines. This triggers a WARN during the
hibernation resume path, where flush_icache_range() is called with
interrupts disabled and is therefore prone to deadlock:

  | Disabling non-boot CPUs ...
  | CPU1: shutdown
  | psci: CPU1 killed.
  | CPU2: shutdown
  | psci: CPU2 killed.
  | CPU3: shutdown
  | psci: CPU3 killed.
  | WARNING: CPU: 0 PID: 1 at ../kernel/smp.c:416 smp_call_function_many+0xd4/0x350
  | Modules linked in:
  | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.20.0-rc4 #1

Since all secondary CPUs have been taken offline prior to invalidating
the I-cache, there's actually no need for an IPI and we can simply call
__flush_icache_range() instead.

Cc: <stable@vger.kernel.org>
Fixes: 3b8c9f1cdfc50 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings")
Reported-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Tested-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Merge branch 'nvme-4.20' of git://git.infradead.org/nvme into for-linus

Pull NVMe fixes from Christoph.

* 'nvme-4.20' of git://git.infradead.org/nvme:
nvmet-rdma: fix response use after free
nvme: validate controller state before rescheduling keep alive

blk-mq: punt failed direct issue to dispatch list

After the direct dispatch corruption fix, we permanently disallow direct
dispatch of non read/write requests. This works fine off the normal IO
path, as they will be retried like any other failed direct dispatch
request. But for the blk_insert_cloned_request() that only DM uses to
bypass the bottom level scheduler, we always first attempt direct
dispatch. For some types of requests, that's now a permanent failure,
and no amount of retrying will make that succeed. This results in a
livelock.

Instead of making special cases for what we can direct issue, and now
having to deal with DM solving the livelock while still retaining a BUSY
condition feedback loop, always just add a request that has been through
->queue_rq() to the hardware queue dispatch list. These are safe to use
as no merging can take place there. Additionally, if requests do have
prepped data from drivers, we aren't dependent on them not sharing space
in the request structure to safely add them to the IO scheduler lists.

This basically reverts ffe81d45322c and is based on a patch from Ming,
but with the list insert case covered as well.

Fixes: ffe81d45322c ("blk-mq: fix corruption with direct issue")
Cc: stable@vger.kernel.org
Suggested-by: Ming Lei <ming.lei@redhat.com>
Reported-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

nvmet-rdma: fix response use after free

nvmet_rdma_release_rsp() may free the response before using it at error
flow.

Fixes: 8407879 ("nvmet-rdma: fix possible bogus dereference under heavy load")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: validate controller state before rescheduling keep alive

Delete operations are seeing NULL pointer references in call_timer_fn.
Tracking these back, the timer appears to be the keep alive timer.

nvme_keep_alive_work() which is tied to the timer that is cancelled
by nvme_stop_keep_alive(), simply starts the keep alive io but doesn't
wait for it's completion. So nvme_stop_keep_alive() only stops a timer
when it's pending. When a keep alive is in flight, there is no timer
running and the nvme_stop_keep_alive() will have no affect on the keep
alive io. Thus, if the io completes successfully, the keep alive timer
will be rescheduled. In the failure case, delete is called, the
controller state is changed, the nvme_stop_keep_alive() is called while
the io is outstanding, and the delete path continues on. The keep
alive happens to successfully complete before the delete paths mark it
as aborted as part of the queue termination, so the timer is restarted.
The delete paths then tear down the controller, and later on the timer
code fires and the timer entry is now corrupt.

Fix by validating the controller state before rescheduling the keep
alive. Testing with the fix has confirmed the condition above was hit.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

block, bfq: fix decrement of num_active_groups

Since commit '2d29c9f89fcd ("block, bfq: improve asymmetric scenarios
detection")', if there are process groups with I/O requests waiting for
completion, then BFQ tags the scenario as 'asymmetric'. This detection
is needed for preserving service guarantees (for details, see comments
on the computation * of the variable asymmetric_scenario in the
function bfq_better_to_idle).

Unfortunately, commit '2d29c9f89fcd ("block, bfq: improve asymmetric
scenarios detection")' contains an error exactly in the updating of
the number of groups with I/O requests waiting for completion: if a
group has more than one descendant process, then the above number of
groups, which is renamed from num_active_groups to a more appropriate
num_groups_with_pending_reqs by this commit, may happen to be wrongly
decremented multiple times, namely every time one of the descendant
processes gets all its pending I/O requests completed.

A correct, complete solution should work as follows. Consider a group
that is inactive, i.e., that has no descendant process with pending
I/O inside BFQ queues. Then suppose that num_groups_with_pending_reqs
is still accounting for this group, because the group still has some
descendant process with some I/O request still in
flight. num_groups_with_pending_reqs should be decremented when the
in-flight request of the last descendant process is finally completed
(assuming that nothing else has changed for the group in the meantime,
in terms of composition of the group and active/inactive state of
child groups and processes). To accomplish this, an additional
pending-request counter must be added to entities, and must be
updated correctly.

To avoid this additional field and operations, this commit resorts to
the following tradeoff between simplicity and accuracy: for an
inactive group that is still counted in num_groups_with_pending_reqs,
this commit decrements num_groups_with_pending_reqs when the first
descendant process of the group remains with no request waiting for
completion.

This simplified scheme provides a fix to the unbalanced decrements
introduced by 2d29c9f89fcd. Since this error was also caused by lack
of comments on this non-trivial issue, this commit also adds related
comments.

Fixes: 2d29c9f89fcd ("block, bfq: improve asymmetric scenarios detection")
Reported-by: Steven Barrett <steven@liquorix.net>
Tested-by: Steven Barrett <steven@liquorix.net>
Tested-by: Lucjan Lucjanov <lucjan.lucjanov@gmail.com>
Reviewed-by: Federico Motta <federico@willer.it>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'gnss-4.20-rc6' of https://git./linux/kernel/git/johan/gnss into char-misc-linus

Johan writes:

GNSS fixes for 4.20-rc6

Here's a fix for a broken activation retry loop in the sirf driver.

Included are also two MAINTAINERS updates.

All have been in linux-next with no reported issues.

Signed-off-by: Johan Hovold <johan@kernel.org>
* tag 'gnss-4.20-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss:
  MAINTAINERS: exclude gnss from SIRFPRIMA2 regex matching
  MAINTAINERS: add gnss scm tree
  gnss: sirf: fix activation retry handling

netfilter: seqadj: re-load tcp header pointer after possible head reallocation

When adjusting sack block sequence numbers, skb_make_writable() gets
called to make sure tcp options are all in the linear area, and buffer
is not shared.

This can cause tcp header pointer to get reallocated, so we must
reaload it to avoid memory corruption.

This bug pre-dates git history.

Reported-by: Neel Mehta <nmehta@google.com>
Reported-by: Shane Huntley <shuntley@google.com>
Reported-by: Heather Adkins <argv@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

CIFS: Avoid returning EBUSY to upper layer VFS

EBUSY is not handled by VFS, and will be passed to user-mode. This is not
correct as we need to wait for more credits.

This patch also fixes a bug where rsize or wsize is used uninitialized when
the call to server->ops->wait_mtu_credits() fails.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

crypto: user - Disable statistics interface

Since this user-space API is still undergoing significant changes,
this patch disables it for the current merge window.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Merge tag 'drm-fixes-2018-12-07' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"There's a bit more in here than I'd like, and I'm hoping things calm
  down when I'm out.

  msm:
   - a bunch of display fixes for the new DPU
   - a couple of command submission fixes

  omap:
   - some DSI fixes

  ast:
   - driver unload crash fix

  core:
   - fix the lease uevent so userspace can distinguish it

  amd:
   - fix a bpc regression
   - fix lru handling regression
   - fixed firmware support for new GPUs
   - power management fixes for vega20"

* tag 'drm-fixes-2018-12-07' of git://anongit.freedesktop.org/drm/drm: (37 commits)
  drm/ast: Fix connector leak during driver unload
  drm/amdgpu/vcn: Update vcn.cur_state during suspend
  drm/amd/display: Fix overflow/truncation from strncpy.
  drm/amd/powerplay: improve OD code robustness
  drm/amdgpu: enlarge maximum waiting time of KIQ
  drm/fb-helper: Fix typo in parameter description
  drm/amd/powerplay: support SoftMin/Max setting for some specific DPM
  drm/amd/powerplay: issue pre-display settings for display change event
  drm/amd/powerplay: support new pptable upload on Vega20
  drm/amdgpu/gmc8: always load MC firmware in the driver
  drm/amdgpu/gmc8: update MC firmware for polaris
  drm/amdgpu: update mc firmware image for polaris12 variants
  drm/msm: Fix error return checking
  drm/msm/dpu: Ignore alpha for XBGR8888 format
  drm/msm: dpu: Fix "WARNING: invalid free of devm_ allocated data"
  drm/msm/hdmi: Drop pointless static qualifier in msm_hdmi_bind()
  drm/msm: Move fence put to where failure occurs
  drm/msm: dpu: Don't set legacy plane->crtc pointer
  drm/msm/gpu: Don't map command buffers with nr_relocs equal to 0
  drm/msm/hdmi: Enable HPD after HDMI IRQ is set up
  ...

Merge tag 'nfs-for-4.20-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
"This is mainly fallout from the updates to the SUNRPC code that is
  being triggered from less common combinations of NFS mount options.

  Highlights include:

  Stable fixes:
   - Fix a page leak when using RPCSEC_GSS/krb5p to encrypt data.

  Bugfixes:
   - Fix a regression that causes the RPC receive code to hang
   - Fix call_connect_status() so that it handles tasks that got
     transmitted while queued waiting for the socket lock.
   - Fix a memory leak in call_encode()
   - Fix several other connect races.
   - Fix receive code error handling.
   - Use the discard iterator rather than MSG_TRUNC for compatibility
     with AF_UNIX/AF_LOCAL sockets.
   - nfs: don't dirty kernel pages read by direct-io
   - pnfs/Flexfiles fix to enforce per-mirror stateid only for NFSv4
     data servers"

* tag 'nfs-for-4.20-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Don't force a redundant disconnection in xs_read_stream()
  SUNRPC: Fix up socket polling
  SUNRPC: Use the discard iterator rather than MSG_TRUNC
  SUNRPC: Treat EFAULT as a truncated message in xs_read_stream_request()
  SUNRPC: Fix up handling of the XDRBUF_SPARSE_PAGES flag
  SUNRPC: Fix RPC receive hangs
  SUNRPC: Fix a potential race in xprt_connect()
  SUNRPC: Fix a memory leak in call_encode()
  SUNRPC: Fix leak of krb5p encode pages
  SUNRPC: call_connect_status() must handle tasks that got transmitted
  nfs: don't dirty kernel pages read by direct-io
  flexfiles: enforce per-mirror stateid only for v4 DSes

Merge branch 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM spectre fix from Russell King:
"Exynos folk noticed that CPU hotplug wasn't working with their kernel
configuration, and have tested this as fixing the problem"

* 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: ensure that processor vtables is not lost after boot

Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
"Some small fixes that have been accumulated:

   - Chris Cole noticed that in a SMP environment, the DMA cache
     coherence handling can produce undesirable results in a corner
     case

   - Propagate that fix for ARMv7M as well

   - Fix a false positive with source fortification

   - Fix an uninitialised return that Nathan Jones spotted"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8816/1: dma-mapping: fix potential uninitialized return
  ARM: 8815/1: V7M: align v7m_dma_inv_range() with v7 counterpart
  ARM: 8814/1: mm: improve/fix ARM v7_dma_inv_range() unaligned address handling
  ARM: 8806/1: kprobes: Fix false positive with FORTIFY_SOURCE

i2c: uniphier-f: fix violation of tLOW requirement for Fast-mode

Currently, the clock duty is set as tLOW/tHIGH = 1/1. For Fast-mode,
tLOW is set to 1.25 us while the I2C spec requires tLOW >= 1.3 us.

tLOW/tHIGH = 5/4 would meet both Standard-mode and Fast-mode:
Standard-mode: tLOW = 5.56 us, tHIGH = 4.44 us
Fast-mode: tLOW = 1.39 us, tHIGH = 1.11 us

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

i2c: uniphier: fix violation of tLOW requirement for Fast-mode

Currently, the clock duty is set as tLOW/tHIGH = 1/1. For Fast-mode,
tLOW is set to 1.25 us while the I2C spec requires tLOW >= 1.3 us.

tLOW/tHIGH = 5/4 would meet both Standard-mode and Fast-mode:
Standard-mode: tLOW = 5.56 us, tHIGH = 4.44 us
Fast-mode: tLOW = 1.39 us, tHIGH = 1.11 us

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

i2c: uniphier-f: fill TX-FIFO only in IRQ handler for repeated START

- For a repeated START condition, this controller starts data transfer
immediately after the slave address is written to the TX-FIFO.

- Once the TX-FIFO empty interrupt is asserted, the controller makes
a pause even if additional data are written to the TX-FIFO.

Given those circumstances, the data after a repeated START may not be
transferred if the interrupt is asserted while the TX-FIFO is being
filled up. A more reliable way is to append TX data only in the
interrupt handler.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

i2c: uniphier-f: fix timeout error after reading 8 bytes

I was totally screwed up in commit eaba68785c2d ("i2c: uniphier-f:
fix race condition when IRQ is cleared"). Since that commit, if the
number of read bytes is multiple of the FIFO size (8, 16, 24... bytes),
the STOP condition could be issued twice, depending on the timing.
If this happens, the controller will go wrong, resulting in the timeout
error.

It was more than 3 years ago when I wrote this driver, so my memory
about this hardware was vague. Please let me correct the description
in the commit log of eaba68785c2d.

Clearing the IRQ status on exiting the IRQ handler is absolutely
fine. This controller makes a pause while any IRQ status is asserted.
If the IRQ status is cleared first, the hardware may start the next
transaction before the IRQ handler finishes what it supposed to do.

This partially reverts the bad commit with clear comments so that I
will never repeat this mistake.

I also investigated what is happening at the last moment of the read
mode. The UNIPHIER_FI2C_INT_RF interrupt is asserted a bit earlier
(by half a period of the clock cycle) than UNIPHIER_FI2C_INT_RB.

I consulted a hardware engineer, and I got the following information:

UNIPHIER_FI2C_INT_RF
asserted at the falling edge of SCL at the 8th bit.

UNIPHIER_FI2C_INT_RB
asserted at the rising edge of SCL at the 9th (ACK) bit.

In order to avoid calling uniphier_fi2c_stop() twice, check the latter
interrupt. I also commented this because it is obscure hardware internal.

Fixes: eaba68785c2d ("i2c: uniphier-f: fix race condition when IRQ is cleared")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node

Some AMD based HP laptops have a SMB0001 ACPI device node which does not
define any methods.

This leads to the following error in dmesg:

[ 5.222731] cmi: probe of SMB0001:00 failed with error -5

This commit makes acpi_smbus_cmi_add() return -ENODEV instead in this case
silencing the error. In case of a failure of the i2c_add_adapter() call
this commit now propagates the error from that call instead of -EIO.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

i2c: axxia: properly handle master timeout

According to Intel (R) Axxia TM Lionfish Communication Processor
Peripheral Subsystem Hardware Reference Manual, the AXXIA I2C module
have a programmable Master Wait Timer, which among others, checks the
time between commands send in manual mode. When a timeout (25ms) passes,
TSS bit is set in Master Interrupt Status register and a Stop command is
issued by the hardware.

The axxia_i2c_xfer(), does not properly handle this situation, however.
For each message a separate axxia_i2c_xfer_msg() is called and this
function incorrectly assumes that any interrupt might happen only when
waiting for completion. This is mostly correct but there is one
exception - a master timeout can trigger if enough time has passed
between individual transfers. It will, by definition, happen between
transfers when the interrupts are disabled by the code. If that happens,
the hardware issues Stop command.

The interrupt indicating timeout will not be triggered as soon as we
enable them since the Master Interrupt Status is cleared when master
mode is entered again (which happens before enabling irqs) meaning this
error is lost and the transfer is continued even though the Stop was
issued on the bus. The subsequent operations completes without error but
a bogus value (0xFF in case of read) is read as the client device is
confused because aborted transfer. No error is returned from
master_xfer() making caller believe that a valid value was read.

To fix the problem, the TSS bit (indicating timeout) in Master Interrupt
Status register is checked before each transfer. If it is set, there was
a timeout before this transfer and (as described above) the hardware
already issued Stop command so the transaction should be aborted thus
-ETIMEOUT is returned from the master_xfer() callback. In order to be
sure no timeout was issued we can't just read the status just before
starting new transaction as there will always be a small window of time
(few CPU cycles at best) where this might still happen. For this reason
we have to temporally disable the timer before checking for TSS bit.
Disabling it will, however, clear the TSS bit so in order to preserve
that information, we have to read it in ISR so we have to ensure that
the TSS interrupt is not masked between transfers of one transaction.
There is no need to call bus recovery or controller reinitialization if
that happens so it's skipped.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Merge branch 'mlxsw-Various-fixes'

Ido Schimmel says:

====================
mlxsw: Various fixes

Patches #1 and #2 fix two VxLAN related issues. The first patch removes
warnings that can currently be triggered from user space. Second patch
avoids leaking a FID in an error path.

Patch #3 fixes a too strict check that causes certain host routes not to
be promoted to perform GRE decapsulation in hardware.

Last patch avoids a use-after-free when deleting a VLAN device via an
ioctl when it is enslaved to a bridge. I have a patchset for net-next
that reworks this code and makes the driver more robust.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>