drbd: fix list corruption (recent regression)

The commit 288f422ec13667de40b278535d2a5fb5c77352c4
 drbd: Track all IO requests on the TL, not writes only
moved a list_add_tail(req, ) into a region where req
may have just been freed due to conflict detection.

Fix this by adding a proper cleanup section for that code path.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Initialize all members of sync_conf to their defaults [Bugz 315]

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Make sure tl_restart(, resend) can not get called multiple times for a new connection

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Do not try to free tl_hash in drbd_disconnect() when IO is suspended

We may not free tl_hash when IO is suspended, since we can not wait
until ap_bio_cnt reaches zero.

We can do this after susp reched 0, since then tl_clear was called

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Allow attach while IO is suspended

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Allow tl_restart() to do IO completion while IO is suspended

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Fixed a deadlock, probably only affected UP machines

After disconnect (most likely mdev->net_cnt == 0) and we are
still in an unstable state (!drbd_state_is_stable()). When we
get an IO request in drbd_get_max_buffers() (called from
__inc_ap_bio_cond(), called from inc_ap_bio()) we wake up
misc_wait. Misc_wait is also used in inc_ap_bio() to sleep
until the outcome of __inc_ap_bio_cond() changes. => Busy loop!

Solution: Have a dedicated wait queue for get_net_conf() and
put_net_conf().

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Do not do a hard state change when establishing a connection [bugz 304]

Make sure the state engine can deny two primaries to connect

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Ensure that the peer was not rebootet in the meantime before resending TL

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Delayed creation of current-UUID

When a fencing policy of "resource-and-stonith" is configured,
and DRBD looses connection to it's peer, we can delay the
creation of a new current-UUID until IO gets thawed.

That allows one to deploy fence-peer handlers that actually
commit suicide on the machine they get started.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Run the fence-peer helper asynchronously

Since we can not thaw the transfer log, the next logical step is
to allow reconnects while the fence-peer handler runs.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Reduce the verbosity of some state transitions

State transitions in the space of non-allowed states used
to be very noisy. Reduce that, since that has little value
for the majority of the user base.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Removing a by now obsolete clause in the state sanitizing

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Now we need to handle the ed_uuid of an diskless, unconnected primary correctly

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Disabled the crashed_primary detection for re-attach of last data while IO is frozen

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Do not allow a fencing-policy of resource-and-stonith with protocol A

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Finished the "on-no-data-accessible suspend-io;" functionality

When no data is accessible (no connection to the peer, nor a local disk)
allow the user to select to freeze all IO operations instead of getting
IO errors.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Removed redundant error checks in the request code path

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: factored drbd_req_make_private_bio() out of drbd_req_new()

Preparing tl_thaw_dio()

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Do not send two barriers without any writes between them

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: factored tl_restart() out of tl_clear().

If IO was frozen for a temporal network outage, resend the
content of the transfer-log into the newly established connection.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: mod_req has now a return value

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: Track all IO requests on the TL, not writes only

With that the drbd_fail_pending_reads() function becomes obsolete.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

drbd: renamed drbd_tl_epoch.n_req to drbd_tl_epoch.n_writes

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>

amiga floppy: Compile failure fixes

o Compile fixes for amiga floppy driver.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

atari floppy: Stop sharing request queue across multiple gendisks

o Use one request queue per gendisk instead of sharing the queue.

o Don't have hardware. No compile testing or run time testing done. Completely
  untested.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

amiga floppy: Stop sharing request queue across multiple gendisks

o Use one request queue per gendisk instead of sharing request queue

o Don't have hardware. No compile testing or run time testing done. Completely
  untested.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

floppy: switch to one queue per drive instead of sharing a queue

Pretty straight forward conversion. Note that we do round-robin
between the drives that have available requests, before we simply
used the drive that the IO scheduler told us to. Since the IO
scheduler doesn't care about multiple devices per queue, the resulting
sort would not have made sense.

Fixed by Vivek to get rid of a double lock problem in set_next_request()

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>

cciss: remove some superfluous tests from cciss_bigpassthru()

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

cciss: factor out cciss_big_passthru

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

cciss: factor out cciss_passthru

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

cciss: factor out cciss_getluninfo

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

cciss: factor out cciss_getdrivver

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

cciss: factor out cciss_getfirmver

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

cciss: factor out cciss_getbustypes

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

cciss: factor out cciss_getheartbeat

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

cciss: factor out cciss_setnodename

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

cciss: factor out cciss_getnodename

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

cciss: factor out cciss_setintinfo

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

cciss: factor out cciss_getintinfo

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

cciss: factor out cciss_getpciinfo

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

loop: add some basic read-only sysfs attributes

Create /sys/block/loopX/loop directory and provide these attributes:
 - backing_file
 - autoclear
 - offset
 - sizelimit

This loop directory is present only if loop device is configured.

To be used in util-linux-ng (and possibly elsewhere like udev rules)
where code need to get loop attributes from kernel (and not store
duplicate info in userspace).

Moreover loop ioctls are not even able to provide full backing
file info because of buffer limits.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

Merge branch 'radix-tree' of git://git./linux/kernel/git/dgc/xfsdev

* 'radix-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev:
  radix-tree: radix_tree_range_tag_if_tagged() can set incorrect tags
  radix-tree: clear all tags in radix_tree_node_rcu_free

Linux 2.6.36-rc2

radix-tree: radix_tree_range_tag_if_tagged() can set incorrect tags

Commit ebf8aa44beed48cd17893a83d92a4403e5f9d9e2 ("radix-tree:
omplement function radix_tree_range_tag_if_tagged") does not safely
set tags on on intermediate tree nodes. The code walks down the tree
setting tags before it has fully resolved the path to the leaf under
the assumption there will be a leaf slot with the tag set in the
range it is searching.

Unfortunately, this is not a valid assumption - we can abort after
setting a tag on an intermediate node if we overrun the number of
tags we are allowed to set in a batch, or stop scanning because we
we have passed the last scan index before we reach a leaf slot with
the tag we are searching for set.

As a result, we can leave the function with tags set on intemediate
nodes which can be tripped over later by tag-based lookups. The
result of these stale tags is that lookup may end prematurely or
livelock because the lookup cannot make progress.

The fix for the problem involves reocrding the traversal path we
take to the leaf nodes, and only propagating the tags back up the
tree once the tag is set in the leaf node slot. We are already
recording the path for efficient traversal, so there is no
additional overhead to do the intermediately node tag setting in
this manner.

This fixes a radix tree lookup livelock triggered by the new
writeback sync livelock avoidance code introduced in commit
f446daaea9d4a420d16c606f755f3689dcb2d0ce ("mm: implement writeback
livelock avoidance using page tagging").

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>

radix-tree: clear all tags in radix_tree_node_rcu_free

Commit f446daaea9d4a420d16c606f755f3689dcb2d0ce ("mm: implement
writeback livelock avoidance using page tagging") introduced a new
radix tree tag, increasing the number of tags in each node from 2 to
3. It did not, however, fix up the code in
radix_tree_node_rcu_free() that cleans up after radix_tree_shrink()
and hence could leave stray tags set in the new tag array.

The result is that the livelock avoidance code added in the the
above commit would hit stale tags when doing tag based lookups,
resulting in livelocks when trying to traverse the tree.

Fix this problem in radix_tree_node_rcu_free() so it doesn't happen
again in the future by using a loop to walk all the tags up to
RADIX_TREE_MAX_TAGS to clear the stray tags radix_tree_shrink()
leaves behind.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Nick Piggin <npiggin@kernel.dk>
Acked-by: Jan Kara <jack@suse.cz>

Merge branch 'kvm-updates/2.6.36' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PIT: free irq source id in handling error path
  KVM: destroy workqueue on kvm_create_pit() failures
  KVM: fix poison overwritten caused by using wrong xstate size

Merge branch 'for-linus' of git://git./linux/kernel/git/anholt/drm-intel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (58 commits)
  drm/i915,intel_agp: Add support for Sandybridge D0
  drm/i915: fix render pipe control notify on sandybridge
  agp/intel: set 40-bit dma mask on Sandybridge
  drm/i915: Remove the conflicting BUG_ON()
  drm/i915/suspend: s/IS_IRONLAKE/HAS_PCH_SPLIT/
  drm/i915/suspend: Flush register writes before busy-waiting.
  i915: disable DAC on Ironlake also when doing CRT load detection.
  drm/i915: wait for actual vblank, not just 20ms
  drm/i915: make sure eDP PLL is enabled at the right time
  drm/i915: fix VGA plane disable for Ironlake+
  drm/i915: eDP mode set sequence corrections
  drm/i915: add panel reset workaround
  drm/i915: Enable RC6 on Ironlake.
  drm/i915/sdvo: Only set is_lvds if we have a valid fixed mode.
  drm/i915: Set up a render context on Ironlake
  drm/i915 invalidate indirect state pointers at end of ring exec
  drm/i915: Wake-up wait_request() from elapsed hang-check (v2)
  drm/i915: Apply i830 errata for cursor alignment
  drm/i915: Only update i845/i865 CURBASE when disabled (v2)
  drm/i915: FBC is updated within set_base() so remove second call in mode_set()
  ...

Merge branch 'for-linus' of git://git./linux/kernel/git/penberg/slab-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slab: fix object alignment
  slub: add missing __percpu markup in mm/slub_def.h

Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: wait for discard to finish

drm/i915,intel_agp: Add support for Sandybridge D0

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

drm/i915: fix render pipe control notify on sandybridge

This one is missed in last pipe control fix for sandybridge,
that really unmask interrupt bit for notify in render engine IMR.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

agp/intel: set 40-bit dma mask on Sandybridge

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

drm/i915: Remove the conflicting BUG_ON()

We now attempt to free "active" objects following a GPU hang as either
the GPU will be reset or the hang is permenant. In either case, the GPU
writes will not be flushed to main memory and it should be safe to
return that memory back to the system.

The BUG_ON(active) is thus overkill and can erroneously fire after a
EIO.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

drm/i915/suspend: s/IS_IRONLAKE/HAS_PCH_SPLIT/

For the shared paths on the next generation chipsets.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

drm/i915/suspend: Flush register writes before busy-waiting.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

i915: disable DAC on Ironlake also when doing CRT load detection.

Like on Sandybridge, disabling the DAC here when doing CRT load detect
avoids forever hangs waiting on the hardware.

test procedure on HP 2740p:
boot with no VGA plugged in, start X,
plug in VGA monitor (1280x1024)
chvt 3
machine hangs waiting forever.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

drm/i915: wait for actual vblank, not just 20ms

Waiting for a hard coded 20ms isn't always enough to make sure a vblank
period has actually occurred, so add code to make sure we really have
passed through a vblank period (or that the pipe is off when disabling).

This prevents problems with mode setting and link training, and seems to
fix a bug like https://bugs.freedesktop.org/show_bug.cgi?id=29278, but
on an HP 8440p instead.  Hopefully also fixes
https://bugs.freedesktop.org/show_bug.cgi?id=29141.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

workqueue: Add basic tracepoints to track workqueue execution

With the introduction of the new unified work queue thread pools,
we lost one feature: It's no longer possible to know which worker
is causing the CPU to wake out of idle. The result is that PowerTOP
now reports a lot of "kworker/a:b" instead of more readable results.

This patch adds a pair of tracepoints to the new workqueue code,
similar in style to the timer/hrtimer tracepoints.

With this pair of tracepoints, the next PowerTOP can correctly
report which work item caused the wakeup (and how long it took):

Interrupt (43)            i915      time   3.51ms    wakeups 141
Work      ieee80211_iface_work      time   0.81ms    wakeups  29
Work              do_dbs_timer      time   0.55ms    wakeups  24
Process                   Xorg      time  21.36ms    wakeups   4
Timer    sched_rt_period_timer      time   0.01ms    wakeups   1

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6:
  mtd: nand: Fix probe of Samsung NAND chips
  mtd: nand: Fix regression in BBM detection
  pxa3xx: fix ns2cycle equation

Replace Configure with Enable in description of MAXSMP

The "Configure" word tends to make user believe they have to say 'yes'
to be able to choose the number of procs/nodes.  "Enable" should be
unambiguous enough.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: make stack guard page logic use vm_prev pointer

Like the mlock() change previously, this makes the stack guard check
code use vma->vm_prev to see what the mapping below the current stack
is, rather than have to look it up with find_vma().

Also, accept an abutting stack segment, since that happens naturally if
you split the stack with mlock or mprotect.

Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: make the mlock() stack guard page checks stricter

If we've split the stack vma, only the lowest one has the guard page.
Now that we have a doubly linked list of vma's, checking this is trivial.

Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: make the vma list be doubly linked

It's a really simple list, and several of the users want to go backwards
in it to find the previous vma.  So rather than have to look up the
previous entry with 'find_vma_prev()' or something similar, just make it
doubly linked instead.

Tested-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mtd: nand: Fix probe of Samsung NAND chips

Apparently, the check for a 6-byte ID string introduced by commit
426c457a3216fac74e3d44dd39729b0689f4c7ab ("mtd: nand: extend NAND flash
detection to new MLC chips") is NOT sufficient to determine whether or
not a Samsung chip uses their new MLC detection scheme or the old,
standard scheme. This adds a condition to check cell type.

Signed-off-by: Tilman Sauerbeck <tilman@code-monkey.de>
Signed-off-by: Brian Norris <norris@broadcom.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org

Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, apic: Fix apic=debug boot crash
  x86, hotplug: Serialize CPU hotplug to avoid bringup concurrency issues
  x86-32: Fix dummy trampoline-related inline stubs
  x86-32: Separate 1:1 pagetables from swapper_pg_dir
  x86, cpu: Fix regression in AMD errata checking code

Documentation: fix ozlabs.org mailing list address

This list moved to lists.ozlabs.org quite some time ago.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: Fix ozlabs.org mailing list addresses

All these lists moved to lists.ozlabs.org quite a while ago.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation: kernel-locking: mutex_trylock cannot be used in interrupt context

Chapter 6 is right about mutex_trylock, but chapter 10 wasn't.  This error
was introduced during semaphore-to-mutex conversion of the Unreliable
guide.  :-)

If user context which performs mutex_lock() or mutex_trylock() is
preempted by interrupt context which performs mutex_trylock() on the same
mutex instance, a deadlock occurs.  This is because these functions do not
disable local IRQs when they operate on mutex->wait_lock.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/scsi/qla4xxx: fix build

gcc-4.0.2:

  drivers/scsi/qla4xxx/ql4_os.c: In function 'qla4_8xxx_error_recovery':
  drivers/scsi/qla4xxx/ql4_glbl.h:135: sorry, unimplemented: inlining failed in call to 'qla4_8xxx_set_drv_active': function body not available
  drivers/scsi/qla4xxx/ql4_os.c:2377: sorry, unimplemented: called from here
  drivers/scsi/qla4xxx/ql4_glbl.h:135: sorry, unimplemented: inlining failed in call to 'qla4_8xxx_set_drv_active': function body not available
  drivers/scsi/qla4xxx/ql4_os.c:2393: sorry, unimplemented: called from here

Cc: Ravi Anand <ravi.anand@qlogic.com>
Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: fix compile error in dma_get_cache_alignment()

Fix uml compile error:

  include/linux/dma-mapping.h:145: error: redefinition of 'dma_get_cache_alignment'
  arch/um/include/asm/dma-mapping.h:99: note: previous definition of 'dma_get_cache_alignment' was here

Introduced by commit 4565f0170dfc ("dma-mapping: unify
dma_get_cache_alignment implementations")

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

oom: __task_cred() need rcu_read_lock()

dump_tasks() needs to hold the RCU read lock around its access of the
target task's UID.  To this end it should use task_uid() as it only needs
that one thing from the creds.

The fact that dump_tasks() holds tasklist_lock is insufficient to prevent the
target process replacing its credentials on another CPU.

Then, this patch change to call rcu_read_lock() explicitly.

===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
mm/oom_kill.c:410 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 1
4 locks held by kworker/1:2/651:
 #0:  (events){+.+.+.}, at: [<ffffffff8106aae7>]
process_one_work+0x137/0x4a0
 #1:  (moom_work){+.+...}, at: [<ffffffff8106aae7>]
process_one_work+0x137/0x4a0
 #2:  (tasklist_lock){.+.+..}, at: [<ffffffff810fafd4>]
out_of_memory+0x164/0x3f0
 #3:  (&(&p->alloc_lock)->rlock){+.+...}, at: [<ffffffff810fa48e>]
find_lock_task_mm+0x2e/0x70

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

oom: fix tasklist_lock leak

Commit 0aad4b3124 ("oom: fold __out_of_memory into out_of_memory")
introduced a tasklist_lock leak.  Then it caused following obvious
danger warnings and panic.

    ================================================
    [ BUG: lock held when returning to user space! ]
    ------------------------------------------------
    rsyslogd/1422 is leaving the kernel with locks still held!
    1 lock held by rsyslogd/1422:
     #0:  (tasklist_lock){.+.+.+}, at: [<ffffffff810faf64>] out_of_memory+0x164/0x3f0
    BUG: scheduling while atomic: rsyslogd/1422/0x00000002
    INFO: lockdep is turned off.

This patch fixes it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

oom: fix NULL pointer dereference

Commit b940fd7035 ("oom: remove unnecessary code and cleanup") added an
unnecessary NULL pointer dereference.  remove it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/mmc/host/sdhci-s3c.c: use the correct mutex and card detect function

There's some merge problem between sdhic core and sdhci-s3c host.  After
mutex is changed to spinlock.  It needs to use use spin lock functions and
use the correct card detection function.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sdhci: add no hi-speed bit quirk support

Some SDHCI controllers like s5pc110 don't have an HISPD bit in the HOSTCTL
register.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s5pc110: SDHCI-s3c support on s5pc110

s5pc110 (aka s5pv210) uses the same SDHCI IP.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s5pc110: SDHCI-s3c can override host capabilities

Each board can override the default sdhci host capabilities.
Some board has broken features by hardwares and support 8-bit bandwidth.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/radix-tree.c: fix overflow in radix_tree_range_tag_if_tagged()

When radix_tree_maxindex() is ~0UL, it can happen that scanning overflows
index and tree traversal code goes astray reading memory until it hits
unreadable memory.  Check for overflow and exit in that case.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

revert "hwmon: f71882fg: add support for the Fintek F71808E"

Revert commit 7721fea3d0fd93fb4d000eb737b444369358d6d3 ("hwmon:
f71882fg: add support for the Fintek F71808E").

Hans said:

: A second review after I've received a data sheet for this device from
: Fintek has turned up a few bugs.
:
: Unfortunately Giel (nor I) have time to fix this in time for the 2.6.36
: cycle.  Therefor I would like to see this patch reverted as not having any
: support for the hwmon function of this superio chip is better then having
: unreliable support.

Cc: Giel van Schijndel <me@mortis.eu>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kfifo: add explicit error checking in all the examples

Provide a check in all the kfifo examples to validate the correct
execution of each testcase.

Signed-off-by: Andrea Righi <arighi@develer.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kfifo: fix a memory leak in dma example

We use a dynamically allocated kfifo in the dma example, so we need to
free it when unloading the module.

Signed-off-by: Andrea Righi <arighi@develer.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kfifo: fix kernel BUG in dma example

The scatterlist is used uninitialized in kfifo_dma_in_prepare().  This
triggers the following bug if CONFIG_DEBUG_SG=y:

  ------------[ cut here ]------------
  kernel BUG at include/linux/scatterlist.h:65!
  invalid opcode: 0000 [#1] PREEMPT SMP
  ...
  Call Trace:
   [<ffffffff810a1eab>] setup_sgl+0x6b/0xe0
   [<ffffffffa03d7000>] ? example_init+0x0/0x265 [dma_example]
   [<ffffffff810a2021>] __kfifo_dma_in_prepare+0x21/0x30
   [<ffffffffa03d7124>] example_init+0x124/0x265 [dma_example]
   [<ffffffff810f9c55>] ? trace_module_notify+0x25/0x370
   [<ffffffff81110c6e>] ? free_pages_prepare+0x11e/0x1e0
   [<ffffffff8106f2b1>] ? get_parent_ip+0x11/0x50
   [<ffffffff810f9c55>] ? trace_module_notify+0x25/0x370
   [<ffffffff810b65fd>] ? trace_hardirqs_on+0xd/0x10
   [<ffffffff814beade>] ? mutex_unlock+0xe/0x10
   [<ffffffff810f9c71>] ? trace_module_notify+0x41/0x370
   [<ffffffff810a77d5>] ? __blocking_notifier_call_chain+0x45/0x80
   [<ffffffff81137b7a>] ? vfree+0x2a/0x30
   [<ffffffff810a6ac3>] ? up_read+0x23/0x40
   [<ffffffff810a77f5>] ? __blocking_notifier_call_chain+0x65/0x80
   [<ffffffff810001e3>] do_one_initcall+0x43/0x180
   [<ffffffff810c577a>] sys_init_module+0xba/0x200
   [<ffffffff8103819b>] system_call_fastpath+0x16/0x1b
  RIP  [<ffffffff810a1e31>] setup_sgl_buf+0x1a1/0x1b0
   RSP <ffff88006720dc98>
  ---[ end trace a72b979fd3c1d3a5 ]---

Add the proper initialization to avoid the bug.

Signed-off-by: Andrea Righi <arighi@develer.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kfifo: add explicit error checking in byte stream example

Provide a static array of expected items that kfifo should contain at the
end of the test to validate it.

Signed-off-by: Andrea Righi <arighi@develer.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kfifo: add kfifo_skip() testcase

Add a testcase for kfifo_skip() to the byte stream fifo example.

Signed-off-by: Andrea Righi <arighi@develer.com>
Cc: Greg KH <greg@kroah.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kfifo: implement missing __kfifo_skip_r()

kfifo_skip() is currently broken, due to the missing of the internal
helper function.  Add it.

Signed-off-by: Andrea Righi <arighi@develer.com>
Cc: Greg KH <greg@kroah.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

matroxfb: fix incorrect use of memcpy_toio()

Screen is completely corrupted since 2.6.34.  Bisection revealed that it's
caused by commit 6175ddf06b61720 ("x86: Clean up mem*io functions.").

H.  Peter Anvin explained that memcpy_toio() does not copy data in 32bit
chunks anymore on x86.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: <stable@kernel.org> [2.6.34.x, 2.6.35.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86, apic: Fix apic=debug boot crash

Fix a boot crash when apic=debug is used and the APIC is
not properly initialized.

This issue appears during Xen Dom0 kernel boot but the
fix is generic and the crash could occur on real hardware
as well.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Cc: xen-devel@lists.xensource.com
Cc: konrad.wilk@oracle.com
Cc: jeremy@goop.org
Cc: <stable@kernel.org> # .35.x, .34.x, .33.x, .32.x
LKML-Reference: <20100819224616.GB9967@router-fw-old.local.net-space.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

x86, hotplug: Serialize CPU hotplug to avoid bringup concurrency issues

When testing cpu hotplug code on 32-bit we kept hitting the "CPU%d:
Stuck ??" message due to multiple cores concurrently accessing the
cpu_callin_mask, among others.

Since these codepaths are not protected from concurrent access due to
the fact that there's no sane reason for making an already complex
code unnecessarily more complex - we hit the issue only when insanely
switching cores off- and online - serialize hotplugging cores on the
sysfs level and be done with it.

[ v2.1: fix !HOTPLUG_CPU build ]

Cc: <stable@kernel.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20100819181029.GC17171@aftab>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  kprobes/x86: Fix the return address of multiple kretprobes
  perf tools: Fix build error on read only source.
  perf, x86: Fix Intel-nhm PMU programming errata workaround

mtd: nand: Fix regression in BBM detection

Commit c7b28e25cb9beb943aead770ff14551b55fa8c79 ("mtd: nand: refactor BB
marker detection") caused a regression in detection of factory-set bad
block markers, especially for certain small-page NAND. This fix removes
some unneeded constraints on using NAND_SMALL_BADBLOCK_POS, making the
detection code more correct.

This regression can be seen, for example, in Hynix HY27US081G1M and
similar.

Signed-off-by: Brian Norris <norris@broadcom.com>
Tested-by: Michael Guntsche <mike@it-loops.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

kprobes/x86: Fix the return address of multiple kretprobes

Fix the return address of subsequent kretprobes when multiple
kretprobes are set on the same function.

For example:

 # cd /sys/kernel/debug/tracing
 # echo "r:event1 sys_symlink" > kprobe_events
 # echo "r:event2 sys_symlink" >> kprobe_events
 # echo 1 > events/kprobes/enable
 # ln -s /tmp/foo /tmp/bar

(without this patch)

 # cat trace
              ln-897   [000] 20404.133727: event1: (kretprobe_trampoline+0x0/0x4c <- sys_symlink)
              ln-897   [000] 20404.133747: event2: (system_call_fastpath+0x16/0x1b <- sys_symlink)

(with this patch)

 # cat trace
              ln-740   [000] 13799.491076: event1: (system_call_fastpath+0x16/0x1b <- sys_symlink)
              ln-740   [000] 13799.491096: event2: (system_call_fastpath+0x16/0x1b <- sys_symlink)

Signed-off-by: KUMANO Syuhei <kumano.prog@gmail.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
LKML-Reference: <1281853084.3254.11.camel@camp10-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'perf/urgent' of git://git./linux/kernel/git/acme/linux-2.6 into perf/urgent

Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Fix an Oops in the NFSv4 atomic open code
  NFS: Fix the selection of security flavours in Kconfig
  NFS: fix the return value of nfs_file_fsync()
  rpcrdma: Fix SQ size calculation when memreg is FRMR
  xprtrdma: Do not truncate iova_start values in frmr registrations.
  nfs: Remove redundant NULL check upon kfree()
  nfs: Add "lookupcache" to displayed mount options
  NFS: allow close-to-open cache semantics to apply to root of NFS filesystem
  SUNRPC: fix NFS client over TCP hangs due to packet loss (Bug 16494)

Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  USB HID: Add ID for eGalax Multitouch used in JooJoo tablet
  HID: hiddev: fix memory corruption due to invalid intfdata
  HID: hiddev: protect against disconnect/NULL-dereference race
  HID: picolcd: correct ordering of framebuffer freeing
  HID: picolcd: testing the wrong variable

Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix build error: conflicting types for ‘sys_execve’

drm/i915: make sure eDP PLL is enabled at the right time

We need to make sure the eDP PLL is enabled before the pipes or planes,
so do it as part of the DP prepare mode set function.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

drm/i915: fix VGA plane disable for Ironlake+

We need to use I/O port instructions to access VGA registers on
Ironlake+, and it doesn't hurt on other platforms, so switch the VGA
plane disable function over to using them.  Move it to init time as well
while we're at it, no need to repeatedly disable the VGA plane with
every mode set and DPMS event.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

drm/i915: eDP mode set sequence corrections

We should disable the panel first when shutting down an eDP link.  And
when turning one on, the panel needs to be enabled before link training
or eDP I/O won't be enabled.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

drm/i915: add panel reset workaround

Ironlake requires that we clear the reset panel bit during power
sequences and restore it afterwards.  Uncondtionally add code to do that
since it should be harmless on SNB+.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>