project/bcm63xx/u-boot.git
11 years agomips: don't hardcode Malta env baudrate
Paul Burton [Tue, 26 Nov 2013 17:45:25 +0000 (17:45 +0000)]
mips: don't hardcode Malta env baudrate

The baudrate passed to Linux in the environment was hardcoded at 38400.
Instead pass the correct baudrate from global data, allowing Linux to
correctly inherit the baudrate used by U-boot when console setup is not
explicitly specified.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
11 years agoPrepare v2014.01-rc1
Tom Rini [Mon, 25 Nov 2013 21:49:32 +0000 (16:49 -0500)]
Prepare v2014.01-rc1

Signed-off-by: Tom Rini <trini@ti.com>
11 years agoMerge branch 'sandbox1' of http://git.denx.de/u-boot-x86
Tom Rini [Mon, 25 Nov 2013 15:42:53 +0000 (10:42 -0500)]
Merge branch 'sandbox1' of git.denx.de/u-boot-x86

11 years agoMerge branch 'master' of git://git.denx.de/u-boot-net
Tom Rini [Mon, 25 Nov 2013 15:42:19 +0000 (10:42 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-net

11 years agoMerge branch 'master' of git://git.denx.de/u-boot-nand-flash
Tom Rini [Mon, 25 Nov 2013 15:42:13 +0000 (10:42 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

11 years agoMerge branch 'buildpatman' of http://git.denx.de/u-boot-x86
Tom Rini [Mon, 25 Nov 2013 15:42:05 +0000 (10:42 -0500)]
Merge branch 'buildpatman' of git.denx.de/u-boot-x86

11 years agosparc: Correct arch/sparc/cpu/leon3/start.S from SPDX conversion
Tom Rini [Mon, 18 Nov 2013 13:31:56 +0000 (08:31 -0500)]
sparc: Correct arch/sparc/cpu/leon3/start.S from SPDX conversion

The SPDX tag conversion ate part of this file, put things back to the
way they should be.

Signed-off-by: Tom Rini <trini@ti.com>
11 years agoblackfin: don't use 'bool' when it causes problems
Wolfgang Denk [Tue, 19 Nov 2013 07:01:44 +0000 (08:01 +0100)]
blackfin: don't use 'bool' when it causes problems

The use of 'bool' data types in globally used header files cases build
errors like this:

In file included from arch/blackfin/include/asm/blackfin.h:13:0,
                 from include/common.h:92,
                 from cmd_test.c:17:
arch/blackfin/include/asm/blackfin_local.h:54:1: error: unknown type name 'bool'

Use plain 'int' instead to avoid such kind of trouble.

Signed-off-by: Wolfgang Denk <wd@denx.de>
11 years agoMAKEALL: add -b (--board) option
Masahiro Yamada [Thu, 21 Nov 2013 10:06:58 +0000 (19:06 +0900)]
MAKEALL: add -b (--board) option

Some board have multiple configurations.
For example, the board "m54455evb" has many configurations:
M54455EVB, M54455EVB_a66, M54455EVB_i66, M54455EVB_intel, ...

When we modify board-related files, we need to test
all configurations based on such a board.

In such a case, the new option -b is useful.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agobios_emulator: delete an unnecessary include path
Masahiro Yamada [Wed, 20 Nov 2013 09:14:23 +0000 (18:14 +0900)]
bios_emulator: delete an unnecessary include path

-I$(TOPDIR)/include is defined in the top config.mk.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agonand_spl: trivial refactoring of makefiles
Masahiro Yamada [Wed, 20 Nov 2013 09:11:57 +0000 (18:11 +0900)]
nand_spl: trivial refactoring of makefiles

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agoMakefile: descend into subdirectories only when CONFIG_API is defined
Masahiro Yamada [Wed, 20 Nov 2013 03:45:56 +0000 (12:45 +0900)]
Makefile: descend into subdirectories only when CONFIG_API is defined

All objects under api/ and examples/api/ directories are selected
by CONFIG_API.
So we can move CONFIG_API switch to the top Makefile.

In order to use CONFIG_API, the definition of SUBDIR_EXAMPLES-y
must be moved after "sinlude $(obj)include/autoconf.mk".

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agocommon: Delete unnecessary rules.
Masahiro Yamada [Mon, 18 Nov 2013 07:24:58 +0000 (16:24 +0900)]
common: Delete unnecessary rules.

The directory tools/ is always built before common/.
So when envcrc tool is necessary in common/Makefile,
it already exists.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agodrivers: delete unnecessary HOSTCFLAGS
Masahiro Yamada [Mon, 18 Nov 2013 02:18:57 +0000 (11:18 +0900)]
drivers: delete unnecessary HOSTCFLAGS

HOSTCFLAGS is meaningless because no host programs
are compiled there.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agoMakefile: move some libraries to lib/Makefile
Masahiro Yamada [Mon, 18 Nov 2013 02:17:30 +0000 (11:17 +0900)]
Makefile: move some libraries to lib/Makefile

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agoMakefile: descend into subdirectories only when CONFIG_API is defined
Masahiro Yamada [Mon, 18 Nov 2013 02:08:35 +0000 (11:08 +0900)]
Makefile: descend into subdirectories only when CONFIG_API is defined

All objects under api/ and examples/api/ directories are selected
by CONFIG_API.
So we can move CONFIG_API switch to the top Makefile.

In order to use CONFIG_API, the definition of SUBDIR_EXAMPLES-y
must be moved after "sinlude $(obj)include/autoconf.mk".

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agoexamples: delete unnecessary CPPFLAGS
Masahiro Yamada [Mon, 18 Nov 2013 02:06:00 +0000 (11:06 +0900)]
examples: delete unnecessary CPPFLAGS

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agoboard: tqm5200: delete its own object make rule
Masahiro Yamada [Mon, 18 Nov 2013 01:39:39 +0000 (10:39 +0900)]
board: tqm5200: delete its own object make rule

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agospieval: Remove remainders of dead board
Masahiro Yamada [Mon, 18 Nov 2013 01:34:36 +0000 (10:34 +0900)]
spieval: Remove remainders of dead board

Commit 69434e4c deleted spieval board support
but it missed to clean up include/configs/spieval.h file.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agopost: remove unnecessary include path settings
Masahiro Yamada [Mon, 18 Nov 2013 01:25:41 +0000 (10:25 +0900)]
post: remove unnecessary include path settings

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agoboard: h2200: Delete an unnecessary make rule
Masahiro Yamada [Mon, 18 Nov 2013 00:44:54 +0000 (09:44 +0900)]
board: h2200: Delete an unnecessary make rule

We have a generic rule to generate .o file from *.S
in $(TOPDIR)/config.mk.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agotools: updater: Remove remainders of dead board
Masahiro Yamada [Thu, 14 Nov 2013 02:00:30 +0000 (11:00 +0900)]
tools: updater: Remove remainders of dead board

tools/updater needs board/MAI/AmigaOneG3SE board
for compiling.
But AmigaOneG3SE board was already deleted
by Commit 953b7e6.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agotools: imls: Remove a broken and unused tool.
Masahiro Yamada [Thu, 14 Nov 2013 01:58:56 +0000 (10:58 +0900)]
tools: imls: Remove a broken and unused tool.

It looks like tools/imls/Makefile is invoked from nowhere.
And also it is broken.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agogpio_led: add support for inverted polarity
Igor Grinberg [Thu, 7 Nov 2013 23:03:52 +0000 (01:03 +0200)]
gpio_led: add support for inverted polarity

Some GPIO connected LEDs have inverted polarity.
Introduce new config option: CONFIG_GPIO_LED_INVERTED_TABLE for the
specifying the inverted GPIO LEDs list and add support for this in the
gpio_led driver.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Tested-by: Ilya Ledvich <ilya@compulab.co.il>
11 years agogpio_led: check gpio_request() return value
Igor Grinberg [Thu, 7 Nov 2013 23:03:51 +0000 (01:03 +0200)]
gpio_led: check gpio_request() return value

Add a check for the gpio_request() function return value and do not try
to configure the GPIO if the gpio_request() call fails.
Also, print an error message indicating the gpio_request() has failed.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Tested-by: Ilya Ledvich <ilya@compulab.co.il>
11 years agoREADME: document the CONFIG_GPIO_LED symbol
Igor Grinberg [Thu, 7 Nov 2013 23:03:50 +0000 (01:03 +0200)]
README: document the CONFIG_GPIO_LED symbol

The CONFIG_GPIO_LED symbol does not have any documentation in the README
file. Document the CONFIG_GPIO_LED symbol.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
11 years agohash.c: Correct non-hash subcommand crc32 addr-save support
Tom Rini [Thu, 7 Nov 2013 12:39:48 +0000 (07:39 -0500)]
hash.c: Correct non-hash subcommand crc32 addr-save support

In the case of not having CONFIG_CMD_HASH but having CONFIG_CMD_CRC32
enabled (and not CONFIG_CRC32_VERIFY), we end up in this part of the
code path on hash_command().  However, we will only have exactly 3 args
here, and 3 > 3 is false, and we will not try and store the hash at the
address given as arg #3.  The next problem however is that we've been
moving argv around so the third value is now in argv[0] not argv[3].

Confirmed on AM335x Beaglebone White.

Signed-off-by: Tom Rini <trini@ti.com>
11 years agonet: rtl8169: Add support for RTL8168d/8111d
Thierry Reding [Fri, 20 Sep 2013 14:03:43 +0000 (16:03 +0200)]
net: rtl8169: Add support for RTL8168d/8111d

This chip is compatible with the existing driver, except that it uses
BAR2 instead of BAR1 for the I/O memory region. Using this patch I can
use the PCIe ethernet interface on the CompuLab Trimslice to boot from
the network.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Patch: 276477

11 years agonet: rtl8169: Improve cache maintenance
Thierry Reding [Fri, 20 Sep 2013 14:03:42 +0000 (16:03 +0200)]
net: rtl8169: Improve cache maintenance

Instead of directly calling the low-level invalidate_dcache_range() and
flush_cache() functions, provide thin wrappers that take into account
alignment requirements.

While at it, fix a case where the cache was flushed but should have been
invalidated, two cases where the buffer data was flushed instead of the
descriptor and a missing cache invalidation before reading the packet
data that the NIC just wrote to memory.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Patch: 276474

11 years agonet: zynq_gem: Add d-cache support
Srikanth Thokala [Fri, 8 Nov 2013 17:25:48 +0000 (22:55 +0530)]
net: zynq_gem: Add d-cache support

Added d-cache support for zynq_gem.c,
Observed a difference of +0.8 MiB/s when downloading
a file of size of 3007944Bytes.

With d-cache OFF:
----------------
Filename 'uImage'.
Load address: 0x800
Loading: #################################################################
         #################################################################
         #################################################################
         ##########
         1.3 MiB/s
done
Bytes transferred = 3007944 (2de5c8 hex)

With d-cache ON:
---------------
Filename 'uImage'.
Load address: 0x800
Loading: #################################################################
         #################################################################
         #################################################################
         ##########
         2.1 MiB/s
done
Bytes transferred = 3007944 (2de5c8 hex)

Changes on zynq_gem for d-cache support:
- Tx and Rx buffers are cache-aligned
- Updated logic for invalidating Rx buffers and flushing Tx buffers.
- Tx and Rx BD's are allocated from non-cacheable region.
  (When BDs are cached, we don't see a consistent link)
- Use TX BD status intead of txsr status checks.

Signed-off-by: Srikanth Thokala <sthokal@xilinx.com>
Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
11 years agophy: Use general phy code for smsc lan8720a
David Dueck [Tue, 5 Nov 2013 16:23:03 +0000 (17:23 +0100)]
phy: Use general phy code for smsc lan8720a

Signed-off-by: David Dueck <davidcdueck@googlemail.com>
11 years agophy: Use supported field during autonegotiation
David Dueck [Tue, 5 Nov 2013 16:23:02 +0000 (17:23 +0100)]
phy: Use supported field during autonegotiation

The current code incorrectly detects gigabit capabilities for some
100Mbit/s phys. (lan8720a)

Signed-off-by: David Dueck <davidcdueck@googlemail.com>
11 years agonet: dm9000: random mac address support
Andrew Ruder [Wed, 23 Oct 2013 00:09:02 +0000 (19:09 -0500)]
net: dm9000: random mac address support

When an unprogrammed EEPROM is attached to a dm9000, the dm9000 will
come up with a invalid MAC address of ff:ff:ff:ff:ff:ff.  Add code that
gets enabled if CONFIG_RANDOM_MACADDR is enabled that generates a random
(and valid) locally administered MAC address that allows the system to
network boot until a real MAC address can be configured.

Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
11 years agodrivers/net/e1000: Introduce CONFIG_E1000_NO_NVM
Rojhalat Ibrahim [Mon, 7 Oct 2013 16:30:39 +0000 (18:30 +0200)]
drivers/net/e1000: Introduce CONFIG_E1000_NO_NVM

The e1000 driver expects to always have some kind of non-volatile memory
attached directly to the ethernet controller chip. This means that I would
have to add an additional separate flash chip to my custom board just to
store essentially the MAC address. Since I don't want to do that, this patch
introduces a new config option CONFIG_E1000_NO_NVM. If defined it disables
all accesses to the NVM. I have tested the patch with a 82574 controller.

Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
11 years agonet: tftpsrv: Get correct client MAC address
Andrew Ruder [Wed, 23 Oct 2013 00:10:28 +0000 (19:10 -0500)]
net: tftpsrv: Get correct client MAC address

NetServerEther was not being cleared in the tftp server code, so the
destination MAC address would be whatever the last destination MAC
address was.

Scenario:
U-Boot:
dhcp
tftpsrv
Host:
Send device WRQ
Device:
Responds with ACK to dhcp server mac address with
host ip address

By clearing NetServerEther, we force a lookup of the host MAC address
to go with the associated host IP.

Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
11 years agonet: phy: atheros: Fix masks for AR8035 and AR8021
Fabio Estevam [Sat, 2 Nov 2013 18:40:42 +0000 (16:40 -0200)]
net: phy: atheros: Fix masks for AR8035 and AR8021

The masks were ignoring the last 4 bits which didn't allow detection differences
between the ar8031 and ar8035.

Signed-off-by: Jon Nettleton <jon.nettleton@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Patch: 288018

11 years agonet/phy: Fix the phy id mask of AR8031
Chunhe Lan [Fri, 1 Nov 2013 09:17:44 +0000 (17:17 +0800)]
net/phy: Fix the phy id mask of AR8031

The both AR8031 and AR8035 belong to Atheros 803x serial PHY.
So the phy id mask of AR8031 is the same to the phy id mask
of AR8035. The right mask value is 0x4fffff.

This patch has been tested on the P1010 and P1023.

Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Patch: 287748

11 years agonet: tsec: Fix mac addr setup portability, cleanup
Claudiu Manoil [Mon, 30 Sep 2013 09:44:47 +0000 (12:44 +0300)]
net: tsec: Fix mac addr setup portability, cleanup

Fix the 32-bit memory access that is not "endianess safe",
i.e. not giving the desired byte layout for LE cpus:
tempval = *((uint *) (tmpbuf + 4)), where 'char tmpbuf[]'.

Free the stack from rendundant local vars:
tmpbuf[] and i.

Use a portable type (u32) for the 32bit tsec register value
holder: tempval.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
11 years agonet: tsec: Use portable regs type (uint->u32)
Claudiu Manoil [Mon, 30 Sep 2013 09:44:46 +0000 (12:44 +0300)]
net: tsec: Use portable regs type (uint->u32)

Use cross arch portable u32 instead of uint for the
tsec registers.  Remove the typedefs for the register
struct definitions in the process.  Fix long lines.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
11 years agonet: tsec: Use portable types and accessors for BDs
Claudiu Manoil [Fri, 4 Oct 2013 16:13:53 +0000 (19:13 +0300)]
net: tsec: Use portable types and accessors for BDs

Currently, the buffer descriptor (BD) fields cannot be
correctly accessed by a little endian processor.  This
patch fixes the issue by making the access of BDs to be
portable among different cpu architectures.

Use portable data types for the Rx/Tx buffer descriptor
fields.  Use portable I/O accessors to insure that the
big endian BDs are correctly accessed by little endian
cpus too, and to insure proper sync with the H/W.
Removed the redundant RTXBD "volatile" type, as proper
synchronization around BD data accesses is provided by
the I/O accessors now.
The "sparse" tool was also used to verify the correctness
of these changes.

Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
11 years agonet: tsec: Fix CamelCase issues around BD code
Claudiu Manoil [Mon, 30 Sep 2013 09:44:44 +0000 (12:44 +0300)]
net: tsec: Fix CamelCase issues around BD code

Fix bufPtr and the rxIdx/ txIdx occurrences to
solve the related checkpatch warnings for the
coming patches.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
11 years agonet: fsl_mdio: Fix warnings for __iomem pointers
Claudiu Manoil [Mon, 30 Sep 2013 09:44:43 +0000 (12:44 +0300)]
net: fsl_mdio: Fix warnings for __iomem pointers

Add the __iomem address space marker for the tsec pointers
to struct tsec_mii_mng memory mapped register regions.
This solves the sparse warnings for mixig normal pointers with
__iomem pointers for tsec. E.g.:

fsl_mdio.c:34:19: warning: incorrect type in argument 1 (different
address spaces)
fsl_mdio.c:34:19:    expected unsigned int volatile [noderef]
<asn:2>*addr
fsl_mdio.c:34:19:    got unsigned int *<noident>
[...]

tsec.c:91:35: warning: incorrect type in argument 1 (different address
spaces)
tsec.c:91:35:    expected struct tsec_mii_mng *phyregs
tsec.c:91:35:    got struct tsec_mii_mng [noderef] <asn:2>*phyregs_sgmii
[...]

tsec.c:680:19: warning: incorrect type in assignment (different address
spaces)
tsec.c:680:19:    expected struct tsec_mii_mng *regs
tsec.c:680:19:    got struct tsec_mii_mng [noderef] <asn:2>*<noident>
[...]

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
11 years agonet: tsec: Cleanup tsec regs init and fix __iomem warns
Claudiu Manoil [Mon, 30 Sep 2013 09:44:42 +0000 (12:44 +0300)]
net: tsec: Cleanup tsec regs init and fix __iomem warns

Remove tsec_t typedef.  Define macros as getters of
tsec and mdio register memory regions, for consistent
initialization of various 'regs' fields and also to
manage overly long initialization lines.
Use the __iomem address space marker to address sparse
warnings in tsec.c where IO accessors are used, like:

tsec.c:394:19: warning: incorrect type in argument 1 (different
address spaces)
tsec.c:394:19:    expected unsigned int volatile [noderef]
<asn:2>*addr
tsec.c:394:19:    got unsigned int *<noident>
[...]

Add the __iomem address space marker for the tsec pointers
to struct tsec_mii_mng memory mapped register regions.
This solves the sparse warnings for mixig normal pointers
with __iomem pointers for tsec.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
11 years agonet: tsec: Fix priv pointer in tsec_mcast_addr()
Claudiu Manoil [Mon, 30 Sep 2013 09:44:41 +0000 (12:44 +0300)]
net: tsec: Fix priv pointer in tsec_mcast_addr()

Access to privlist[1] (hardcoded referece to the 2nd tsec's
priv area) is neither correct nor does it make sense in the
current context.  Each tsec dev has access to its own priv
instance only, and hence to its own set of group address
registers (GADDR) to filter multicast addresses.

This fix leads to removal of the unused (faulty) privlist[]
and related global static vars.  Note that mcast() can be
called only after eth_device allocation and init, and hence
after priv area allocation, so dev->priv is correctly
initialized upon mcast() call.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Patch: 278990

11 years agonet: tsec: Fix and cleanup tsec_mcast_addr()
Claudiu Manoil [Mon, 30 Sep 2013 09:44:40 +0000 (12:44 +0300)]
net: tsec: Fix and cleanup tsec_mcast_addr()

There are several implementation issues for tsec_mcast_addr()
addressed by this patch:
* unmanaged, not portable r/w access to registers; fixed with
setbits_be32()/ clrbits_be32()
* use of volatile pointers
* unnecessary forced cast to u8 for the ether_crc() result
* removed redundant parens
* corrected some comment slips

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Patch: 279000

11 years agonet: Fix mcast function pointer prototype
Claudiu Manoil [Mon, 30 Sep 2013 09:44:39 +0000 (12:44 +0300)]
net: Fix mcast function pointer prototype

This fixes the following compiler warnings when activating
CONFIG_MCAST_TFTP:

tsec.c: In function 'tsec_mcast_addr':
tsec.c:130:2: warning: passing argument 2 of 'ether_crc' makes pointer
from integer without a cast [enabled by default]
In file included from /work/u-boot-net/include/common.h:874:0,
                 from tsec.c:15:
/work/u-boot-net/include/net.h:189:5: note: expected 'const unsigned
char *' but argument is of type 'u8'
tsec.c: In function 'tsec_initialize':
tsec.c:646:13: warning: assignment from incompatible pointer type
[enabled by default]
eth.c: In function 'eth_mcast_join':
eth.c:358:2: warning: passing argument 2 of 'eth_current->mcast' makes
integer from pointer without a cast [enabled by default]
eth.c:358:2: note: expected 'u32' but argument is of type 'u8 *'

In the eth_mcast_join() implementation, eth_current->mcast()
takes a u8 pointer to the multicast mac address and not a ip
address value as implied by its prototype.

Fix parameter type mismatch for tsec_macst_addr() (tsec.c):
ether_crc() takes a u8 pointer not a u8 value.
mcast() is given a u8 pointer to the multicats mac address.
Update parameter type for the rest of mcast() instances.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Patch: 278989

11 years agonet: designware: Fix alignment of buffer descriptors
Alexey Brodkin [Wed, 25 Sep 2013 15:27:48 +0000 (19:27 +0400)]
net: designware: Fix alignment of buffer descriptors

It's important that buffer descriptors are aligned in accordance to GMAC
data bus width (32/64/128-bit). It's safe to align to 128-bit (16-bytes)
for every bus width type.

If buffer descriptor is improperly aligned GMAC discards lower bits of
provided address and as a result reads from improper location that
doesn't match expected fields.

Commit ef76025a99247cdb8f927a2c9f15400678dfb599 "net: Multiple
updates/enhancements to designware.c" introduced another structure
member "link_printed" right before buffer descriptors while "padding"
member was left untouched. This together with alignment of structure
itself to 16-byte boundary forces buffer descriptoprs always to be
4-byte aligned that causes driver complete disfunction if GMAC bus width
is 64 or 128-bit.

Proposed change makes sure all buffer descriptors are 16-byte (128-bit)
aligned.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Patch: 277902

11 years agonet: designware: Respect "bus mode" register contents on SW reset
Alexey Brodkin [Wed, 25 Sep 2013 13:33:10 +0000 (17:33 +0400)]
net: designware: Respect "bus mode" register contents on SW reset

"bus mode" register contains lots of fields and some of them don't
expect to be written with 0 (zero). So since we're only interested in
resetting MAC (which is done with setting the least significant bit of
this register with "0") I believe it's better to modify only 1 bit of
the register.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Vipin Kumar <vipin.kumar@st.com>
Patch: 277864

11 years agonet: sh-eth: Add support R8A7791
Nobuhiro Iwamatsu [Tue, 24 Sep 2013 06:38:33 +0000 (15:38 +0900)]
net: sh-eth: Add support R8A7791

R8A7791 has the same sh-ether IP core as other SH/rmobile.
This patch adds support of R8A7791.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Joe Hershberger <joe.hershberger@gmail.com>
11 years agonet, phy: fix AR8031 phy_mask
Heiko Schocher [Sun, 22 Sep 2013 07:55:49 +0000 (09:55 +0200)]
net, phy: fix AR8031 phy_mask

AR8035 driver will be never applied because of wrong mask for
AR8031 driver. Fix this.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reported-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru>
Cc: Andy Fleming <afleming@freescale.com>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Patch: 276944

11 years agonet: rtl8169: Add support for RTL8168evl/8111evl
Thierry Reding [Fri, 20 Sep 2013 14:03:44 +0000 (16:03 +0200)]
net: rtl8169: Add support for RTL8168evl/8111evl

This chip is compatible with other RTL8168 chips and can be found on the
NVIDIA Cardhu and Beaver boards.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Patch: 276475

11 years agonet: rtl8169: Fix format string
Thierry Reding [Fri, 20 Sep 2013 14:03:41 +0000 (16:03 +0200)]
net: rtl8169: Fix format string

currticks() is defined as get_timer(0), which returns an unsigned long,
so use %lu instead of %d to print the result.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Patch: 276473

11 years agonet: add support for extended registers to mdio command
Stefano Babic [Mon, 2 Sep 2013 13:42:32 +0000 (15:42 +0200)]
net: add support for extended registers to mdio command

Some phys (Micrel) have additional registers that can
be accessed using a special sequence. This patch allows
to use standard "mdio" command to accesss these registers.

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agonet: add function to read/write extended registers in Micrel Phy
Stefano Babic [Mon, 2 Sep 2013 13:42:31 +0000 (15:42 +0200)]
net: add function to read/write extended registers in Micrel Phy

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agonet: add extended function to phy API
Stefano Babic [Mon, 2 Sep 2013 13:42:30 +0000 (15:42 +0200)]
net: add extended function to phy API

Some phys (Micrel) has extended registers that must be
accessed in a special way. Add pointers to the phy driver
structure to allow to use these functions with mdio command.

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agonet: fix mask for phy Micrel KSZ9031
Stefano Babic [Mon, 2 Sep 2013 13:42:29 +0000 (15:42 +0200)]
net: fix mask for phy Micrel KSZ9031

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agophy: add missing constants for Micrel KSZ9031
Stefano Babic [Mon, 2 Sep 2013 13:42:28 +0000 (15:42 +0200)]
phy: add missing constants for Micrel KSZ9031

Signed-off-by: Stefano Babic <sbabic@denx.de>
11 years agonet/phy: realtek: Fix the PHY ID mask to ensure the correct Realtek PHY is detected
Bhupesh Sharma [Sat, 31 Aug 2013 23:10:52 +0000 (04:40 +0530)]
net/phy: realtek: Fix the PHY ID mask to ensure the correct Realtek PHY is detected

The 'get_phy_driver' code in 'drivers/net/phy/phy.c' uses the following
method to determine which driver is to be loaded for a particular PHY
module:

list_for_each(entry, &phy_drivers) {
drv = list_entry(entry, struct phy_driver, list);
if ((drv->uid & drv->mask) == (phy_id & drv->mask))
return drv;
}

This means that a drv->mask of 0xfffff0 will return incorrect phy driver
for the logic above, even if the drv->uid is anything other than
something ending with a 0x0.

For e.g. if the RTL8211E drv->uid is 0x1cc915 and drv->mask is 0xffffff
and the RTL8211B drv->uid is 0x1cc910 and drv->mask is 0xffffff0, then
the phy driver selected will always be RTL8211B even though the
underlying phy connected on the board is a 8211E module.

This patch fixes this issue.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
11 years agonet: phy/vitesse: Add support for VSC8514 phy module
Arpit Goel [Fri, 23 Aug 2013 14:48:05 +0000 (20:18 +0530)]
net: phy/vitesse: Add support for VSC8514 phy module

This patch adds support for VSC8514 PHY module which can be
found on Freescale's T1040RDB boards.

Signed-off-by: Arpit Goel <B44344@freescale.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
11 years agonet: sh-eth: Add support R8A7790
Nobuhiro Iwamatsu [Thu, 22 Aug 2013 04:22:04 +0000 (13:22 +0900)]
net: sh-eth: Add support R8A7790

R8A7790 has the same sh-ether IP core as other SH/rmobile.
This patch adds support of R8A7790.

Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
11 years agonet: sh-eth: Add invalidate cache control for rmobile (ARM SoC)
Nobuhiro Iwamatsu [Thu, 22 Aug 2013 04:22:03 +0000 (13:22 +0900)]
net: sh-eth: Add invalidate cache control for rmobile (ARM SoC)

The sh-eth of rmobile needs to use invalidate_cache* function.
This patch adds invalidate_cache* function.

Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Patch: 268948

11 years agonet: sh-eth: Add control for padding size of packet descriptor
Nobuhiro Iwamatsu [Thu, 22 Aug 2013 04:22:02 +0000 (13:22 +0900)]
net: sh-eth: Add control for padding size of packet descriptor

sh-eth can change the alignment size of a packet descriptor according to BUS
size. This patch adds this function.

Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
11 years agonet: sh-eth: Change cache API of SH
Nobuhiro Iwamatsu [Thu, 22 Aug 2013 04:22:01 +0000 (13:22 +0900)]
net: sh-eth: Change cache API of SH

The cache API of SH was changed from dcache_wback_range to flush_dcache_range.
sh-eth uses dcache_wback_range. This patch changes to flush_dcache_range.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
11 years agoNET: mvgbe: avoid unused variable warning when used without phylib support
Sascha Silbe [Sun, 11 Aug 2013 15:08:23 +0000 (17:08 +0200)]
NET: mvgbe: avoid unused variable warning when used without phylib support

Avoid a recently introduced unused variable warning for boards that
use mvgbe but not phylib.

Signed-off-by: Sascha Silbe <t-uboot@infra-silbe.de>
Patch: 266334

11 years agonet: trivial: Fix typos in mii field descriptions
Stephan Bauroth [Thu, 8 Aug 2013 11:44:41 +0000 (13:44 +0200)]
net: trivial: Fix typos in mii field descriptions

Signed-off-by: Stephan Bauroth <stephan.bauroth@iav.de>
Patch: 265707

11 years agophylib: update atheros ar803x phy
Shengzhou Liu [Thu, 8 Aug 2013 08:33:35 +0000 (16:33 +0800)]
phylib: update atheros ar803x phy

As AR8031 and AR8033 have same PHY ID 0x4dd074, they use the
common driver. Currently AR8031_driver didn't work for AR8033,
hence updated it to have it work on AR8031/AR8033.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
11 years agonet: tftp: Make sure timeout will not effect wrap offset
rockly [Sat, 3 Aug 2013 10:09:05 +0000 (18:09 +0800)]
net: tftp: Make sure timeout will not effect wrap offset

When the block 0 store to the memory of client and timeout at this
moment. Because of no ACK packet, the server will send block 0 again,
if this client reconnect to the server at this time,
TftpBlockWrapOffset will become larger than it should be.

Signed-off-by: Rockly <rocklygnome@gmail.com>
Patch: 264417

11 years agosandbox: Make map_to_sysmem() use a constant pointer
Simon Glass [Thu, 7 Nov 2013 16:31:58 +0000 (09:31 -0700)]
sandbox: Make map_to_sysmem() use a constant pointer

Very often a constant pointer is passed to this function, so we should
declare this, since map_to_sysmem() does not change the pointer.

Signed-off-by: Simon Glass <sjg@chromium.org>
11 years agosandbox: Correct data sizes and printf() strings in fdtdec.c
Simon Glass [Sun, 10 Nov 2013 17:26:54 +0000 (10:26 -0700)]
sandbox: Correct data sizes and printf() strings in fdtdec.c

There are a few wwrnings in this file when building for sandbox. Addresses
coming from the device tree need to be treated as ulong as elsewhere in
U-Boot and we must use map_sysmem() to convert to a pointer when needed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Hung-ying Tyan <tyanh@chromium.org>
11 years agosandbox: config: Don't use 64-bit physical memory
Simon Glass [Sun, 10 Nov 2013 17:26:53 +0000 (10:26 -0700)]
sandbox: config: Don't use 64-bit physical memory

Sandbox uses an emulated memory map which is quite small. We don't need the
CONFIG_PHYS_64BIT option since we can address memory with a 32-bit offset
into our ram_buf.

Adjust the phys_addr_t and phys_size_t types accordingly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Hung-ying Tyan <tyanh@chromium.org>
11 years agosandbox: Use system headers first for sandbox's os.c
Simon Glass [Sun, 10 Nov 2013 17:26:48 +0000 (10:26 -0700)]
sandbox: Use system headers first for sandbox's os.c

This file must be compiled with system headers, even if U-Boot has headers
of the same name. The existing solution for this is good enough for libfdt,
but fails when we have headers like stdint.h in U-Boot.

Use -idirafter instead of -I, and remove the -nostdinc and other things
that we don't want for this file. The best way to do this is to keep a
copy of the original flags, rather than trying to filter them later.

Signed-off-by: Simon Glass <sjg@chromium.org>
11 years agosandbox: Use uint64_t instead of u64 for time
Simon Glass [Sun, 19 May 2013 23:45:35 +0000 (16:45 -0700)]
sandbox: Use uint64_t instead of u64 for time

The uint64_t type is defined in linux/types.h, so is safer than u64, which
is not actually a Linux type.

Change-Id: Ifc9a369e6543250c49117b8d3cb3a676eee43e04
Signed-off-by: Simon Glass <sjg@chromium.org>
11 years agobuildman: make board selector argument a regex
Stephen Warren [Thu, 10 Oct 2013 16:00:20 +0000 (10:00 -0600)]
buildman: make board selector argument a regex

A common use-case is to build all boards for a particular SoC. This can
be achieved by:

./tools/buildman/buildman -b mainline_dev tegra20

However, when the SoC is a member of a family of SoCs, and each SoC has
a different name, it would be even more useful to build all boards for
every SoC in that family. This currently isn't possible since buildman's
board selection command-line arguments are compared to board definitions
using pure string equality.

To enable this, compare using a regex match instead. This matches
MAKEALL's handling of command-line arguments. This enables:

(all Tegra)
./tools/buildman/buildman -b mainline_dev tegra

(all Tegra)
./tools/buildman/buildman -b mainline_dev '^tegra.*$'

(all Tegra20, Tegra30 boards, but not Tegra114)
./tools/buildman/buildman -b mainline_dev 'tegra[23]'

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
11 years agobuildman: fix README
Andreas Bießmann [Tue, 5 Nov 2013 09:37:09 +0000 (10:37 +0100)]
buildman: fix README

This is a trivial fix for c'n'p error.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Acked-by: Simon Glass <sjg@chromium.org>
11 years agopatman: add Commit-notes tag and section
Albert ARIBAUD [Tue, 12 Nov 2013 10:14:41 +0000 (11:14 +0100)]
patman: add Commit-notes tag and section

Sometimes a commit should have notes enclosed with it rather
than withing the cover letter -- possibly even because there
is no cover letter. Add a 'Commit-notes' tag, similar to the
'Series-notes' one; lines between this tag and the next END
line are inserted in the patch right after the '---' commit
delimiter.

Change-Id: I01e99ae125607dc6dec08f3be8a5a0b37f0a483d
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: Simon Glass <sjg@chromium.org>
(Updated README)

11 years agoam335x: fix GPMC config for NAND and NOR SPL boot
pekon gupta [Mon, 18 Nov 2013 13:33:02 +0000 (19:03 +0530)]
am335x: fix GPMC config for NAND and NOR SPL boot

GPMC controller is common IP to interface with both NAND and NOR flash devices.
Also, it supports max 8 chip-selects, which can be independently connected to
any of the devices.
But ROM code expects the boot-device to be connected to only chip-select[0].
Thus to resolve conflict between NOR and NAND boot. This patch:
- combines NOR and NAND configs spread in board files to common gpmc_init()
- configures GPMC based on boot-mode selected for SPL boot.

Signed-off-by: Pekon Gupta <pekon@ti.com>
11 years agomtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme
pekon gupta [Mon, 18 Nov 2013 13:33:01 +0000 (19:03 +0530)]
mtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme

This patch adds new CONFIG_NAND_OMAP_ECCSCHEME, replacing other distributed
CONFIG_xx used for selecting NAND ecc-schemes.
This patch aims at solving following issues.

1) Currently ecc-scheme is tied to SoC platform, which prevents user to select
   other ecc-schemes also supported in hardware. like;
 - most of OMAP3 SoC platforms use only 1-bit Hamming ecc-scheme, inspite
   the fact that they can use higher ecc-schemes like 8-bit ecc-schemes with
   software based error detection (OMAP_ECC_BCH4_CODE_HW_DETECTION_SW).
 - most of AM33xx SoC plaforms use 8-bit BCH ecc-scheme for now, but hardware
   supports BCH16 ecc-scheme also.

2) Different platforms use different CONFIG_xx to select ecc-schemes, which
   adds confusion for user while migrating platforms.
 - *CONFIG_NAND_OMAP_ELM* which enables ELM hardware engine, selects only
    8-bit BCH ecc-scheme with h/w based error-correction (OMAP_ECC_BCH8_CODE_HW)
    whereas ELM hardware engine supports other ecc-schemes also like; BCH4,
    and BCH16 (in future).
 - *CONFIG_NAND_OMAP_BCH8* selects 8-bit BCH ecc-scheme with s/w based error
    correction (OMAP_ECC_BCH8_CODE_HW_DETECTION_SW).
 - *CONFIG_SPL_NAND_SOFTECC* selects 1-bit Hamming ecc-scheme using s/w library

Thus adding new *CONFIG_NAND_OMAP_ECCSCHEME* de-couples ecc-scheme dependency
on SoC platform and NAND driver. And user can select ecc-scheme independently
foreach board.
However, selection some hardware based ecc-schemes (OMAP_ECC_BCHx_CODE_HW) still
depends on presence of ELM hardware engine on SoC. (Refer doc/README.nand)

Signed-off-by: Pekon Gupta <pekon@ti.com>
11 years agomtd: nand: omap: enable BCH ECC scheme using ELM for generic platform
pekon gupta [Mon, 18 Nov 2013 13:33:00 +0000 (19:03 +0530)]
mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform

BCH8_ECC scheme implemented in omap_gpmc.c driver has following favours
+-----------------------------------+-----------------+-----------------+
|ECC Scheme                         | ECC Calculation | Error Detection |
+-----------------------------------+-----------------+-----------------+
|OMAP_ECC_BCH8_CODE_HW              |GPMC             |ELM H/W engine   |
|OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |GPMC             |S/W BCH library  |
+-----------------------------------+-----------------+-----------------+

Current implementation limits the BCH8_CODE_HW only for AM33xx device family.
(using CONFIG_AM33XX). However, other SoC families (like TI81xx) also have
ELM hardware module, and can support ECC error detection using ELM.

This patch
- removes CONFIG_AM33xx
Thus this driver can be reused by all devices having ELM h/w engine.
- adds omap_select_ecc_scheme()
A common function to handle ecc-scheme related configurations. This
can be used both during device-probe and via user-space u-boot commads
to change ecc-scheme. During device probe ecc-scheme is selected based
on CONFIG_NAND_OMAP_ELM or CONFIG_NAND_OMAP_BCH8
- enables CONFIG_BCH
S/W library (lib/bch.c) required by OMAP_ECC_BCHx_CODE_HW_DETECTION_SW
   is enabled by CONFIG_BCH.
- enables CONFIG_SYS_NAND_ONFI_DETECTION
for auto-detection of ONFI compliant NAND devices
- updates following README doc
doc/README.nand
board/ti/am335x/README
doc/README.omap3

Signed-off-by: Pekon Gupta <pekon@ti.com>
[scottwood@freescale.com: fixed unused variable warning]
Signed-off-by: Scott Wood <scottwood@freescale.com>
11 years agomtd: nand: omap: make am33xx/elm.c as common driver for all OMAPx and AMxxxx platforms
pekon gupta [Mon, 18 Nov 2013 13:32:59 +0000 (19:02 +0530)]
mtd: nand: omap: make am33xx/elm.c as common driver for all OMAPx and AMxxxx platforms

ELM hardware engine which is used for ECC error detection, is present on all
latest OMAP SoC (like OMAP4xxx, OMAP5xxx, DRA7xxx, AM33xx, AM43xx). Thus ELM
driver should be moved to common drivers/mtd/nand/ folder so that all SoC
having on-chip ELM hardware engine can re-use it.
This patch has following changes:
- mv arch/arm/include/asm/arch-am33xx/elm.h arch/arm/include/asm/omap_elm.h
- mv arch/arm/cpu/armv7/am33xx/elm.c drivers/mtd/nand/omap_elm.c
- update Makefiles
- update #include <asm/elm.h>
- add CONFIG_NAND_OMAP_ELM to compile driver/mtd/nand/omap_elm.c
and include in all board configs using AM33xx SoC platform.

Signed-off-by: Pekon Gupta <pekon@ti.com>
11 years agomtd: atmel_nand: use dev_xxx instead of printk
Wu, Josh [Fri, 18 Oct 2013 09:46:34 +0000 (17:46 +0800)]
mtd: atmel_nand: use dev_xxx instead of printk

Signed-off-by: Josh Wu <josh.wu@atmel.com>
11 years agomtd: atmel_nand: don't print bit correction message in driver
Wu, Josh [Fri, 18 Oct 2013 09:46:33 +0000 (17:46 +0800)]
mtd: atmel_nand: don't print bit correction message in driver

Since for some MLC nand, bit errors happened too often. Just disable it
to avoid noise

Signed-off-by: Josh Wu <josh.wu@atmel.com>
11 years agosama5d3xek: support larger than 4G nand flash
Wu, Josh [Fri, 18 Oct 2013 09:46:32 +0000 (17:46 +0800)]
sama5d3xek: support larger than 4G nand flash

Signed-off-by: Josh Wu <josh.wu@atmel.com>
11 years agomtd: atmel_nand: enable PMECC support for 8k bytes page NAND flash
Wu, Josh [Fri, 18 Oct 2013 09:46:31 +0000 (17:46 +0800)]
mtd: atmel_nand: enable PMECC support for 8k bytes page NAND flash

increase the delay to 75us to support the 8k bytes page nand flash

Signed-off-by: Josh Wu <josh.wu@atmel.com>
11 years agoboard/c29xpcie: Add support of 8K page size NAND flash
Prabhakar Kushwaha [Fri, 4 Oct 2013 04:35:50 +0000 (10:05 +0530)]
board/c29xpcie: Add support of 8K page size NAND flash

Defines constants required to support 8K page size NAND flash.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
11 years agomtd/ifc: Add support of 8K page size NAND flash
Prabhakar Kushwaha [Fri, 4 Oct 2013 04:35:36 +0000 (10:05 +0530)]
mtd/ifc: Add support of 8K page size NAND flash

Current IFC driver supports till 4K page size NAND flash.
Add support of 8K NAND flash
  - Program Spare region size in csor_ext
  - Add nand_ecclayout for 4 bit & 8 bit ecc
  - Defines constants
  - Add support of 8K NAND boot.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
CC: Liu Po <po.liu@freescale.com>
11 years agomtd: move & update nand_ecclayout structure (plus board changes)
Prabhakar Kushwaha [Fri, 4 Oct 2013 08:17:58 +0000 (13:47 +0530)]
mtd: move & update nand_ecclayout structure (plus board changes)

nand_ecclayout is present in mtd.h at Linux.
Move this structure to mtd.h to comply with Linux.

Also, increase the ecc placement locations to 640 to suport device having
writesize/oobsize of 8KB/640B. This means that the maximum oobsize has gone
up to 640 bytes and consequently the maximum ecc placement locations have
also gone up to 640.

Changes from Prabhabkar's version (squashed into one patch to preserve
bisectability):
 - Added _LARGE to MTD_MAX_*_ENTRIES

   This makes the names match current Linux source, and resolves
   a conflict between
   http://patchwork.ozlabs.org/patch/280488/
   and
   http://patchwork.ozlabs.org/patch/284513/

   The former was posted first and is closer to matching Linux, but
   unlike Linux it does not add _LARGE to the names.  The second adds
   _LARGE to one of the names, and depends on it in a subsequent patch
   (http://patchwork.ozlabs.org/patch/284512/).

 - Made max oobfree/eccpos configurable, and used this on tricorder,
   alpr, ASH405, T4160QDS, and T4240QDS (these boards failed to build
   for me without doing so, due to a size increase).

   On tricorder SPL, this saves 2576 bytes (and makes the SPL build
   again) versus the new default of 640 eccpos and 32 oobfree, and
   saves 336 bytes versus the old default of 128 eccpos and 8 oobfree.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
CC: Vipin Kumar <vipin.kumar@st.com>
[scottwood@freescale.com: changes as described above]
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Thomas Weber <weber@corscience.de>
Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Cc: Stefan Roese <sr@denx.de>
Cc: York Sun <yorksun@freescale.com>
Cc: Tom Rini <trini@ti.com>
Reviewed-by: Stefan Roese <sr@denx.de>
11 years agoMerge branch 'master' of git://git.denx.de/u-boot-mips
Tom Rini [Sun, 17 Nov 2013 01:23:22 +0000 (20:23 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-mips

11 years agofs: descend into sub directories when it is necessary
Masahiro Yamada [Mon, 11 Nov 2013 05:36:10 +0000 (14:36 +0900)]
fs: descend into sub directories when it is necessary

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agoMakefile: move fs/fat/ entry to drivers/Makefile
Masahiro Yamada [Mon, 11 Nov 2013 05:36:09 +0000 (14:36 +0900)]
Makefile: move fs/fat/ entry to drivers/Makefile

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
11 years agoarm: rmobile: Do not create a symbolic link to sh timer
Masahiro Yamada [Mon, 11 Nov 2013 05:36:08 +0000 (14:36 +0900)]
arm: rmobile: Do not create a symbolic link to sh timer

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
11 years agopowerpc: mpc824x: Do not create a symbolic link to bedbug_603e.c
Masahiro Yamada [Mon, 11 Nov 2013 05:36:07 +0000 (14:36 +0900)]
powerpc: mpc824x: Do not create a symbolic link to bedbug_603e.c

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agopowerpc: mpc83xx: Do not create a symbolic link to ddr-gen2.c
Masahiro Yamada [Mon, 11 Nov 2013 05:36:06 +0000 (14:36 +0900)]
powerpc: mpc83xx: Do not create a symbolic link to ddr-gen2.c

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agopowerpc: mpc83xx: delete unused rules
Masahiro Yamada [Mon, 11 Nov 2013 05:36:05 +0000 (14:36 +0900)]
powerpc: mpc83xx: delete unused rules

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agoMakefile: delete unused lines
Masahiro Yamada [Mon, 11 Nov 2013 05:36:04 +0000 (14:36 +0900)]
Makefile: delete unused lines

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agotools: Makefile: delete redundant lines
Masahiro Yamada [Mon, 11 Nov 2013 05:36:03 +0000 (14:36 +0900)]
tools: Makefile: delete redundant lines

HOSTOS is defined and exported at the top Makefile.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agoconfig.mk: delete unnecessary lines
Masahiro Yamada [Mon, 11 Nov 2013 05:36:02 +0000 (14:36 +0900)]
config.mk: delete unnecessary lines

SPL_BIN is already defined in spl/Makefile
and it is used only in spl/Makefile.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agoMakefile: refactor a little
Masahiro Yamada [Mon, 11 Nov 2013 05:36:01 +0000 (14:36 +0900)]
Makefile: refactor a little

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agoMakefile: rename all libraries to built-in.o
Masahiro Yamada [Mon, 11 Nov 2013 05:36:00 +0000 (14:36 +0900)]
Makefile: rename all libraries to built-in.o

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agodrivers/net/npe: descend only when CONFIG_IXP4XX_NPE=y
Masahiro Yamada [Mon, 11 Nov 2013 05:35:59 +0000 (14:35 +0900)]
drivers/net/npe: descend only when CONFIG_IXP4XX_NPE=y

CONFIG_IXP4XX_NPE is defined only for CPU ixp.
It is not necessary to filter by CPU ixp.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
11 years agodrivers/net/fm: descend only when CONFIG_FMAN_ENET=y
Masahiro Yamada [Mon, 11 Nov 2013 05:35:58 +0000 (14:35 +0900)]
drivers/net/fm: descend only when CONFIG_FMAN_ENET=y

CONFIG_FMAN_ENET is defined only for CPU mpc85xx.
We do not need to filter by CPU mpc85xx.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>