Hauke Mehrtens [Tue, 27 Dec 2022 23:11:00 +0000 (00:11 +0100)]
px5g-mbedtls: Use getrandom()
Instead of accessing /dev/urandom use the getrandom syscall. This way we
do not have to keep the file open all the time.
This also fixes a compile error with glibc:
--------
px5g-mbedtls.c: In function '_urandom':
px5g-mbedtls.c:48:9: error: ignoring return value of 'read' declared with attribute 'warn_unused_result' [-Werror=unused-result]
48 | read(urandom_fd, out, len);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
--------
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Dmitry Sokolov [Sun, 15 Jan 2023 21:52:27 +0000 (02:52 +0500)]
ramips: mt7621: add support for Xiaomi Mi Router 4A Gigabit v2
Device is the same as Xiaomi Mi Router 4A Gigabit, except of:
- 5G WiFi is MT7663
- addresses of leds, wifi and eth ports are slightly changed
Specs:
SoC: MT7621
CPU: 2 x 880 MHz
ROM: 16 MB
RAM: 128 MB
WLAN: MT7603, MT7663
MAC addresses:
WAN **** factory 0xe006 (label)
LAN *:f7 factory 0xe000
2.4 GHz *:f8 factory 0x0000+0x4 (mtd-eeprom+0x4)
5 GHz *:f9 factory 0x8000+0x4 (mtd-eeprom+0x4)
Installation:
Factory firmware is based on a custom OpenWrt 17.x.
Installation is the same as for Xiaomi Mi Router 4A Gigabit.
Probably the easiest way to install is to use the script from
this repository: https://github.com/acecilia/OpenWRTInvasion/pull/155
In a more advanced case, you can do everything yourself:
- gain access to the device through one of the exploits described
in the link above
- upload sysupgrade image to /tmp
- overwrite stock firmware:
# mtd -e OS1 -r write /tmp/sysupgrade.bin OS1
Recovery:
Recovery procedure is the same as for Xiaomi Mi Router 4A Gigabit.
Possible options can be found here:
https://openwrt.org/inbox/toh/xiaomi/xiaomi_mi_router_4a_gigabit_edition
One of the ways is to use another router with OpenWrt:
- connect both routers by their LAN ports
- download stock firmware from [1]
- place it inside /tmp/test.bin on the main router
- configure PXE/TFTP on the main router
- power off 4Av2, hold Reset button, power on
- as soon as image download via TFTP starts, Reset can be released
- blinking blue wan LED will indicate the end of the flashing process,
now router can be rebooted
[1] http://cdn.cnbj1.fds.api.mi-img.com/xiaoqiang/rom/r4av2/miwifi_r4av2_firmware_release_2.30.28.bin
Signed-off-by: Dmitry Sokolov <e323w@proton.me>
Maxim Anisimov [Fri, 20 Jan 2023 11:23:40 +0000 (14:23 +0300)]
ramips: improve support for Zyxel Keenetic Extra II
- drop unneeded default-state for led_power
- concat firmware partitions to extend available free space
- increase spi flash frequency to 32 Mhz (value from stock firmware bootlog)
- drop broken-flash-reset because of onboard flash chip W25Q256FV has reset support
- add compatible for pcie wifi according to kernel documetation
- switch to wan mac address with offset 0x28 in rf-eeprom
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Maxim Anisimov [Fri, 20 Jan 2023 13:09:09 +0000 (16:09 +0300)]
ramips: use hex value in zyimage command for Keenetic KN-3010
This is cosmetic change. The hex value is related to the device
model and more human friendly.
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Tom Herbers [Sat, 10 Sep 2022 14:45:42 +0000 (16:45 +0200)]
ath79: add LTE packages for GL-XE300
Add LTE packages required for operating the LTE modems shipped with
the GL-XE300.
Example configuration for an unauthenticated dual-stack APN:
network.wwan0=interface
network.wwan0.proto='qmi'
network.wwan0.device='/dev/cdc-wdm0'
network.wwan0.apn='internet'
network.wwan0.auth='none'
network.wwan0.delay='10'
network.wwan0.pdptype='IPV4V6'
Signed-off-by: Tom Herbers <mail@tomherbers.de>
Shiji Yang [Fri, 20 Jan 2023 03:16:33 +0000 (03:16 +0000)]
ath79: improve support for Letv LBA-047-CH
1. Convert wireless calibration data to NVMEM.
2. Enable control green status LED and change default LED behaviors.
The three LEDs of LBA-047-CH are in the same position, and the green
LED will be completely covered by the other two LEDs. So don's use
green LED as WAN indicator to ensure that only one LED is on at a time.
LED Factory OpenWrt
blue internet fail failsafe && upgrade
green internet okay run
red boot boot
3. Reduce the SPI clock to 30 MHz because the ath79 target does not
support 50 MHz SPI operation well. Keep the fast-read support to
ensure the spi-mem feature (
b3f9842330) is enabled.
4. Remove unused package "uboot-envtools".
5. Split the factory image into two parts: rootfs and kernel.
This change can reduce the factory image size and allow users to
upgrade the OpenWrt kernel loader uImage (OKLI) independently.
The new installation method: First, rename "squashfs-kernel.bin" to
"openwrt-ar71xx-generic-ap147-16M-kernel.bin" and rename "rootfs.bin"
to "openwrt-ar71xx-generic-ap147-16M-rootfs-squashfs.bin". Then we
can press reset button for about 5 seconds to enter tftp download mode.
Finally, set IP address to 192.168.67.100 and upload the above two
parts via tftp server.
Tested on Letv LBA-047-CH
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Edward Chow [Mon, 2 Jan 2023 11:24:20 +0000 (19:24 +0800)]
ath79: calibrate dlink dir-825 c1 and dir-835 a1 with nvmem
Driver for both soc (2.4GHz Wifi) and pci (5 GHz) now pull the calibration
data from the nvmem subsystem.
This allows us to move the userspace caldata extraction for the pci-e ath9k
supported wifi into the device-tree definition of the device.
Currently, "mac-address-ascii" cells only works for ethernet and wmac devices,
so PCI ath9k device uses the old method to calibrate.
Signed-off-by: Edward Chow <equu@openmail.cc>
Tony Butler [Wed, 7 Dec 2022 00:39:27 +0000 (16:39 -0800)]
kernel: add kmod-lib-842
"842" is a compression scheme and this is the software implementation
which is too slow to really use beyond a proof of concept. It can be
selected in ZRAM, ZSWAP, or `fs/pstore`, and is here for completeness.
In general you need a Power8 or better with 842-in-hardware for it to
be fast, but other 842-accelerators are emerging.
Signed-off-by: Tony Butler <spudz76@gmail.com>
Tom Herbers [Tue, 24 Jan 2023 13:14:58 +0000 (14:14 +0100)]
ath79: add label-mac-device for GL-XE300
This adds an label-mac-device alias which refrences the mac which is
printed on the Label of the device.
Signed-off-by: Tom Herbers <mail@tomherbers.de>
Daniel Groth [Sat, 14 Jan 2023 14:32:00 +0000 (15:32 +0100)]
realtek: dgs-1210-10mp: update sfp phy-handle
Adjust the wrong phy-handle definitions for the sfp ports so that they
match the correct switch ports.
Fixes: 89eb8b50d18d ("realtek: dgs-1210-10mp: add full sfp description")
Signed-off-by: Daniel Groth <flygarn12@gmail.com>
Michael Pratt [Fri, 13 Jan 2023 05:37:10 +0000 (00:37 -0500)]
ath79: add support for Senao Engenius EWS660AP
FCC ID: A8J-EWS660AP
Engenius EWS660AP is an outdoor wireless access point with
2 gigabit ethernet ports, dual-band wireless,
internal antenna plates, and 802.3at PoE+
**Specification:**
- QCA9558 SOC 2.4 GHz, 3x3
- QCA9880 WLAN mini PCIe card, 5 GHz, 3x3, 26dBm
- AR8035-A PHY RGMII GbE with PoE+ IN
- AR8033 PHY SGMII GbE with PoE+ OUT
- 40 MHz clock
- 16 MB FLASH MX25L12845EMI-10G
- 2x 64 MB RAM
- UART at J1 populated, RX grounded
- 6 internal antenna plates (5 dbi, omni-directional)
- 5 LEDs, 1 button (power, eth0, eth1, 2G, 5G) (reset)
**MAC addresses:**
Base MAC addressed labeled as "MAC"
Only one Vendor MAC address in flash
eth0 *:d4 MAC art 0x0
eth1 *:d5 --- art 0x0 +1
phy1 *:d6 --- art 0x0 +2
phy0 *:d7 --- art 0x0 +3
**Serial Access:**
the RX line on the board for UART is shorted to ground by resistor R176
therefore it must be removed to use the console
but it is not necessary to remove to view boot log
optionally, R175 can be replaced with a solder bridge short
the resistors R175 and R176 are next to the UART RX pin
**Installation:**
2 ways to flash factory.bin from OEM:
Method 1: Firmware upgrade page:
OEM webpage at 192.168.1.1
username and password "admin"
Navigate to "Firmware Upgrade" page from left pane
Click Browse and select the factory.bin image
Upload and verify checksum
Click Continue to confirm and wait 3 minutes
Method 2: Serial to load Failsafe webpage:
After connecting to serial console and rebooting...
Interrupt uboot with any key pressed rapidly
execute `run failsafe_boot` OR `bootm 0x9fd70000`
wait a minute
connect to ethernet and navigate to
"192.168.1.1/index.htm"
Select the factory.bin image and upload
wait about 3 minutes
**Return to OEM:**
If you have a serial cable, see Serial Failsafe instructions
otherwise, uboot-env can be used to make uboot load the failsafe image
ssh into openwrt and run
`fw_setenv rootfs_checksum 0`
reboot, wait 3 minutes
connect to ethernet and navigate to 192.168.1.1/index.htm
select OEM firmware image from Engenius and click upgrade
**TFTP recovery:**
Requires serial console, reset button does nothing
rename initramfs.bin to '
0101A8C0.img'
make available on TFTP server at 192.168.1.101
power board, interrupt boot
execute tftpboot and bootm 0x81000000
**Format of OEM firmware image:**
The OEM software of EWS660AP is a heavily modified version
of Openwrt Kamikaze. One of the many modifications
is to the sysupgrade program. Image verification is performed
simply by the successful ungzip and untar of the supplied file
and name check and header verification of the resulting contents.
To form a factory.bin that is accepted by OEM Openwrt build,
the kernel and rootfs must have specific names...
openwrt-ar71xx-generic-ews660ap-uImage-lzma.bin
openwrt-ar71xx-generic-ews660ap-root.squashfs
and begin with the respective headers (uImage, squashfs).
Then the files must be tarballed and gzipped.
The resulting binary is actually a tar.gz file in disguise.
This can be verified by using binwalk on the OEM firmware images,
ungzipping then untaring.
Newer EnGenius software requires more checks but their script
includes a way to skip them, otherwise the tar must include
a text file with the version and md5sums in a deprecated format.
The OEM upgrade script is at /etc/fwupgrade.sh.
OKLI kernel loader is required because the OEM software
expects the kernel to be no greater than 1536k
and the factory.bin upgrade procedure would otherwise
overwrite part of the kernel when writing rootfs.
Note on PLL-data cells:
The default PLL register values will not work
because of the external AR8035 switch between
the SOC and the ethernet port.
For QCA955x series, the PLL registers for eth0 and eth1
can be see in the DTSI as 0x28 and 0x48 respectively.
Therefore the PLL registers can be read from uboot
for each link speed after attempting tftpboot
or another network action using that link speed
with `md 0x18050028 1` and `md 0x18050048 1`.
The clock delay required for RGMII can be applied
at the PHY side, using the at803x driver `phy-mode`.
Therefore the PLL registers for GMAC0
do not need the bits for delay on the MAC side.
This is possible due to fixes in at803x driver
since Linux 5.1 and 5.3
Tested-by: Niklas Arnitz <openwrt@arnitz.email>
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Michael Pratt [Wed, 25 Jan 2023 18:02:56 +0000 (13:02 -0500)]
ath79: add pcie1 wifi device to Senao qca955x AP DTSI
Each individual device DTS now enables either pcie0 or pcie1.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Nick Hainke [Wed, 25 Jan 2023 08:07:51 +0000 (09:07 +0100)]
ethtool: update to 6.1
Release notes:
https://lore.kernel.org/netdev/
20221219225600.r54vejiqapn266cm@lion.mk-sys.cz/T/
Add patches fixing compilation:
- 100-uapi-Bring-in-if-h.patch
- 101-netlink-Fix-maybe-uninitialized-meters-variable.patch
- 102-raw-marvell-c-Fix-build-with-musl-libc.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Hauke Mehrtens [Sat, 28 Jan 2023 19:23:20 +0000 (20:23 +0100)]
relayd: bump to version 2023-01-28
f646ba4 route: Fix compile warning with glibc
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 22 Jan 2023 16:17:14 +0000 (17:17 +0100)]
pistachio: Cleanup kernel configuration
This removes some kernel configuration options which are not needed.
This brings the target closer to the OpenWrt standard configuration.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 28 Jan 2023 18:49:51 +0000 (19:49 +0100)]
realtek: Refresh kernel patches
Make the patches apply cleanly again.
Fixes: 4db8598e4296 ("realtek: Do not set KERNEL_ENTRY just to avoid NO_EXCEPT_FILL")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 28 Jan 2023 18:27:51 +0000 (19:27 +0100)]
uhttpd: update to latest Git HEAD
47561aa mimetypes: add audio/video support for apple airplay
6341357 ucode: respect all arguments passed to send()
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Olliver Schinagl [Sat, 28 Jan 2023 14:26:35 +0000 (15:26 +0100)]
realtek: timer: Fix cosmetic whitespace in comments
Comments are a bit weird in the timer driver, lets fix those.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Olliver Schinagl [Thu, 29 Dec 2022 10:27:54 +0000 (11:27 +0100)]
realtek: timer: Remove CEVT_RTL9300 completely
As the timer has been fixed now, we can drop the CEVT_RTL9300 timer all
together.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Olliver Schinagl [Wed, 14 Sep 2022 12:50:38 +0000 (14:50 +0200)]
realtek: timer: Activate for RTL930x devices
Use the new timer driver for the RTL930x devices.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
[remove old clock provider, select MIPS_EXTERNAL_TIMER and refresh
kernel config]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Sander Vanheule [Fri, 27 Jan 2023 22:35:47 +0000 (23:35 +0100)]
realtek: timer: Register enabled scheduler clock
Before calling sched_clock_register(), the timer used to drive the
scheduling clock should already be enabled. Otherwise the kernel log
will show strange time jumps during, and the watchdog might not be
pinged in a timely fashion, resulting in reboots.
[ 0.160281] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 78.104319] clocksource: Switched to clocksource realtek_otto_timer
Fixes: 3cc801117118 ("realtek: resurrect timer driver")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
David Bauer [Sat, 28 Jan 2023 12:50:17 +0000 (13:50 +0100)]
mac80211: use 802.11ax iw modes
This adds missing HE modes to mac80211_prepare_ht_modes.
Previously mesh without wpa_supplicant would be initialized with 802.11g
/NO-HT only, as this method did not parse channel bandwidth for HE
operation.
Signed-off-by: David Bauer <mail@david-bauer.net>
Zoltan HERPAI [Tue, 24 Jan 2023 18:34:22 +0000 (19:34 +0100)]
mxs: fix SD-card image generation for OLinuXino boards
Fixes: mxs: add generic subtarget (64ef920)
Adding the generic target caused the TARGET_BOOTFS_PARTSIZE to stay
hidden for these boards, crashing the FAT filesystem creation.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Olliver Schinagl [Tue, 24 Jan 2023 12:48:53 +0000 (13:48 +0100)]
realtek: eth: Fix missing end of comment marker
Because this comment is followed by another comment, nothing luckily
breaks, so only a cosmetic change.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Petr Štetiar [Thu, 26 Jan 2023 09:34:31 +0000 (10:34 +0100)]
ubus: update to version 2022-06-15
Update which contains just a following fix:
* ubusd: add lookup command queuing support
Defers and continues a client's lookup command to avoid unnecessary
buffering under load.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Wed, 11 Jan 2023 09:26:16 +0000 (10:26 +0100)]
ci: allow custom kernel and target jobs based on labels
Current job triggers based on matching of changed paths is quite
limited, so lets make it possible to additionally trigger manual CI jobs
by adding CI specific pull request build labels:
* `ci:target:x86:64` label is going to trigger CI target check jobs for
x86/64 (sub)target.
* `ci:kernel:x86:64` label is going to trigger CI kernel check jobs for
x86/64 (sub)target.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Nick Hainke [Wed, 25 Jan 2023 20:29:13 +0000 (21:29 +0100)]
linux-firmware: update to
20230117
Changes:
32d3199 linux-firmware: Update firmware file for Intel Bluetooth AX201
2da8a7a linux-firmware: Update firmware file for Intel Bluetooth AX201
8b5ddf4 linux-firmware: Update firmware file for Intel Bluetooth AX211
4219dac linux-firmware: Update firmware file for Intel Bluetooth AX211
fb34135 linux-firmware: Update firmware file for Intel Bluetooth AX210
becd3fc linux-firmware: Update firmware file for Intel Bluetooth AX200
7101c57 linux-firmware: Update firmware file for Intel Bluetooth AX201
49e87fa linux-firmware: Update firmware file for Intel Bluetooth 9560
86b73ce linux-firmware: Update firmware file for Intel Bluetooth 9260
3723b48 brcm: add configuration files for CyberTan WC121
7f626ef qcom: add firmware files for Adreno A200
fc5a25f rtw89: 8852c: update fw to v0.27.56.10
2ba1bea QCA: Add Bluetooth firmware for QCA2066
a1ad1d5 amdgpu: add VCN4.0.4 firmware from amd-5.4
9e01e17 amdgpu: add SMU13.0.7 firmware from amd-5.4
3a50eb8 amdgpu: add SDMA6.0.2 firmware from amd-5.4
19995fb amdgpu: add PSP13.0.7 firmware from amd-5.4
32e7c93 amdgpu: add GC11.0.2 firmware from amd-5.4
20c8060 amdgpu: add DCN3.2.1 firmware from amd-5.4
5c8e895 amdgpu: update VCN4.0.0 firmware from amd-5.4
66b3435 amdgpu: update SMU13.0.0 firmware from amd-5.4
604df78 amdgpu: update SDMA6.0.0 firmware from amd-5.4
3e9169a amdgpu: update PSP13.0.0 firmware from amd-5.4
bd1b7f7 amdgpu: update GC11.0.0 firmware from amd-5.4
c8ff1f4 iwlwifi: add new FWs from core76-35 release
5630963 iwlwifi: update cc/Qu/QuZ firmwares for core76-35 release
8bbec22 iwlwifi: add new FWs from core75-47 release
e20a687 iwlwifi: update 9000-family firmwares to core75-47
504b691 amdgpu: update renoir DMCUB firmware
1ed02d5 amdgpu: Update renoir PSP firmware
d0598c3 amdgpu: update copyright date for LICENSE.amdgpu
cee86df linux-firmware: update firmware for MT7921 WiFi device
e2d1174 linux-firmware: update firmware for MT7922 WiFi device
ce7cc73 linux-firmware: update firmware for mediatek bluetooth chip (MT7921)
91f4c6b linux-firmware: update firmware for mediatek bluetooth chip (MT7922)
52e62d6 cxgb4: Update firmware to revision 1.27.1.0
4704e25 qca: Update firmware files for BT chip WCN6750
c9c1958 rtw89: 8852c: update fw to v0.27.56.9
9e91f0c rtw89: 8852c: update fw to v0.27.56.8
Signed-off-by: Nick Hainke <vincent@systemli.org>
Shiji Yang [Thu, 19 Jan 2023 14:20:59 +0000 (14:20 +0000)]
ath79: add support for D-Link DIR-629 A1
Specifications:
SOC: QCA9588 CPU 720 MHz AHB 200 MHz
Switch: AR8236
RAM: 64 MiB DDR2-600
Flash: 8 MiB
WLAN: Wi-Fi4 2.4 GHz 3*3
LAN: LAN ports *4
WAN: WAN port *1
Buttons: reset *1 + wps *1
LEDs: ethernet *5, power, wlan, wps
MAC Address:
use address source
label 70:62:b8:xx:xx:96 lan && wlan
lan 70:62:b8:xx:xx:96 mfcdata@0x35
wan 70:62:b8:xx:xx:97 mfcdata@0x6a
wlan 70:62:b8:xx:xx:96 mfcdata@0x51
Install via Web UI:
Apply factory image in the stock firmware's Web UI.
Install via Emergency Room Mode:
DIR-629 A1 will enter recovery mode when the system fails to boot or
press reset button for about 10 seconds.
First, set IP address to 192.168.0.1 and server IP to 192.168.0.10.
Then we can open http://192.168.0.1 in the web browser to upload
OpenWrt factory image or stock firmware. Some modern browsers may
need to turn on compatibility mode.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Linhui Liu [Mon, 23 Jan 2023 12:15:36 +0000 (20:15 +0800)]
firmware: intel-microcode: update to
20221108
Changelog:
* New Microcodes:
sig 0x000606c1, pf_mask 0x10, 2022-08-07, rev 0x1000201, size 286720
sig 0x000b0671, pf_mask 0x32, 2022-09-07, rev 0x010e, size 204800
* Updated Microcodes:
sig 0x000706e5, pf_mask 0x80, 2022-08-02, rev 0x00b6, size 113664
sig 0x000806c1, pf_mask 0x80, 2022-06-28, rev 0x00a6, size 110592
sig 0x000806d1, pf_mask 0xc2, 2022-06-28, rev 0x0042, size 102400
sig 0x000806ec, pf_mask 0x94, 2022-07-31, rev 0x00f4, size 105472
sig 0x00090661, pf_mask 0x01, 2022-07-15, rev 0x0017, size 20480
sig 0x00090672, pf_mask 0x07, 2022-09-19, rev 0x0026, size 218112
sig 0x00090675, pf_mask 0x07, 2022-09-19, rev 0x0026
sig 0x000b06f2, pf_mask 0x07, 2022-09-19, rev 0x0026
sig 0x000b06f5, pf_mask 0x07, 2022-09-19, rev 0x0026
sig 0x000906a3, pf_mask 0x80, 2022-09-19, rev 0x0424, size 217088
sig 0x000906a4, pf_mask 0x80, 2022-09-19, rev 0x0424
sig 0x000906ed, pf_mask 0x22, 2022-07-31, rev 0x00f4, size 104448
sig 0x000a0652, pf_mask 0x20, 2022-07-31, rev 0x00f4, size 96256
sig 0x000a0653, pf_mask 0x22, 2022-07-31, rev 0x00f4, size 97280
sig 0x000a0655, pf_mask 0x22, 2022-07-31, rev 0x00f4, size 96256
sig 0x000a0660, pf_mask 0x80, 2022-07-31, rev 0x00f4, size 97280
sig 0x000a0661, pf_mask 0x80, 2022-07-31, rev 0x00f4, size 96256
sig 0x000a0671, pf_mask 0x02, 2022-08-02, rev 0x0056, size 103424
We need to update to this version because
https://ftp.debian.org/debian/pool/non-free/i/intel-microcode/intel-microcode_3.
20220809.1.tar.xz
has been removed.
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Nick Hainke [Tue, 24 Jan 2023 23:22:01 +0000 (00:22 +0100)]
tcpdump: update to 4.99.3
Changes:
https://git.tcpdump.org/tcpdump/blob/
032e4923e5202ea4d5a6d1cead83ed1927135874:/CHANGES
Signed-off-by: Nick Hainke <vincent@systemli.org>
John Audia [Tue, 24 Jan 2023 12:43:03 +0000 (07:43 -0500)]
kernel: bump 5.15 to 5.15.90
All patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
Sander Vanheule [Wed, 25 Jan 2023 21:18:42 +0000 (22:18 +0100)]
realtek: rtl931x: drop LINKER_LOAD_ADDRESS bypass
RTL931x kernel builds were patched to bypass the LINKER_LOAD_ADDRESS
parameter, and hardcode it to 0x80220000. This doesn't make much sense,
since value of LINKER_LOAD_ADDRESS, load-ld, only appears to be a copy
of load-y, adjusted to the linker's taste.
Dropping the hacks for bypassing LINKER_LOAD_ADDRESS results in a kernel
that actually starts booting on an RTL9313 (Netgear MS510TXM), but
currently still hangs when the kernel switches timers.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Wenli Looi [Mon, 23 Jan 2023 18:37:07 +0000 (18:37 +0000)]
ath79: convert Netgear EX7300 caldata to nvmem
Transition to specify caldata in the DTS.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Wenli Looi [Tue, 22 Nov 2022 18:34:37 +0000 (18:34 +0000)]
ath79: consolidate Netgear EX7300 series images
This change consolidates Netgear EX7300 series devices into two images
corresponding to devices that share the same manufacturer firmware
image. Similar to the manufacturer firmware, the actual device model is
detected at runtime. The logic is taken from the netgear GPL dumps in a
file called generate_board_conf.sh.
Hardware details for EX7300 v2 variants
---------------------------------------
SoC: QCN5502
Flash: 16 MiB
RAM: 128 MiB
Ethernet: 1 gigabit port
Wireless 2.4GHz (currently unsupported due to lack of ath9k support):
- EX6250 / EX6400 v2 / EX6410 / EX6420: QCN5502 3x3
- EX7300 v2 / EX7320: QCN5502 4x4
Wireless 5GHz:
- EX6250: QCA9986 3x3 (detected by ath10k as QCA9984 3x3)
- EX6400 v2 / EX6410 / EX6420 / EX7300 v2 / EX7320: QCA9984 4x4
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Wenli Looi [Tue, 22 Nov 2022 18:26:34 +0000 (18:26 +0000)]
build: add ALT3 and ALT4 vendor/model/variant
This is needed for the Netgear EX7300 series v2.
Signed-off-by: Wenli Looi <wlooi@ucalgary.ca>
Christian Marangi [Tue, 24 Jan 2023 22:23:56 +0000 (23:23 +0100)]
CI: push-containers: limit to one concurrent run
We may find in a situation where due the queue an old run finish after
the last run, resulting in the containers getting overwritten with an
old version.
Limit the push-containers workflow to one concurrent run and cancel any
run in progress.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Linhui Liu [Sun, 22 Jan 2023 07:23:00 +0000 (15:23 +0800)]
tools/cmake: update to 3.25.2
Release Notes:
https://cmake.org/cmake/help/latest/release/3.25.html#id2
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Nick Hainke [Sat, 29 Oct 2022 08:22:36 +0000 (10:22 +0200)]
tools/ninja: update to 1.11.1
Release Notes:
https://github.com/ninja-build/ninja/releases/tag/v1.11.1
Sync the "100-make_jobserver_support.patch" with the PR:
https://github.com/ninja-build/ninja/pull/1140
Signed-off-by: Nick Hainke <vincent@systemli.org>
John Audia [Tue, 24 Jan 2023 12:36:07 +0000 (07:36 -0500)]
kernel: bump 5.10 to 5.10.165
All patches automatically rebased.
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Wed, 18 Jan 2023 19:45:07 +0000 (14:45 -0500)]
kernel: bump 5.10 to 5.10.164
All patches automatically rebased
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
Lorenz Brun [Wed, 28 Dec 2022 19:54:21 +0000 (20:54 +0100)]
realtek: dsa: support active-high LEDs
The TP-LINK TL-ST1008F has active-high LEDs, so we need a device tree
property to express this.
Signed-off-by: Lorenz Brun <lorenz@brun.one>
[Tidy up code, restrict changes to 5.15]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Sander Vanheule [Tue, 24 Jan 2023 20:34:58 +0000 (21:34 +0100)]
realtek: rtl931x: drop CONFIG_NO_EXCEPT_FILL hack
On RTL931x builds, CONFIG_RTL931X was used as a stand-in for
CONFIG_NO_EXCEPT_FILL. Now that the latter is always selected for
devices in the realtek target, this hack can be removed. Resulting
device images are binary identical.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Olliver Schinagl [Mon, 9 Jan 2023 13:39:45 +0000 (14:39 +0100)]
realtek: Refresh kernel config with no_except_fill
Update the config files with the previous commit.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Olliver Schinagl [Sun, 8 Jan 2023 16:30:07 +0000 (17:30 +0100)]
realtek: Do not set KERNEL_ENTRY just to avoid NO_EXCEPT_FILL
It seems like we are offsetting the KERNEL_ENTRY to +0x400, which is
also accomplished by the NO_EXCEPT_FILL configuration option.
Since this is the default for MIPS_GENERIC_KERNEL, lets push a little
bit closer to that one by doing the same thing.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Nick Hainke [Sun, 22 Jan 2023 20:09:21 +0000 (21:09 +0100)]
pistachio: switch to 5.15 by default
It appears that only a few users are using the pistachio SoC. The most
active user of the target has already approved the testing kernel and
so it is very unlikely bugs will be reported in the near future.
Therefore, the target should be directly bumped to 5.15.
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Wed, 28 Sep 2022 12:14:13 +0000 (14:14 +0200)]
pistachio: add 5.15 testing kernel
Manually refreshed:
- 903-MIPS-DTS-img-marduk-Add-NXP-SC16IS752IPW.patch
- 905-MIPS-DTS-img-marduk-Add-led-aliases.patch (led node was renamed to led-1)
Automatically refreshed:
- 109-MIPS-DTS-img-marduk-switch-mmc-to-1-bit-mode.patch
- 401-mtd-nor-support-mtd-name-from-device-tree.patch
- 901-MIPS-DTS-img-marduk-Add-SPI-NAND-flash.patch
- 902-MIPS-DTS-img-marduk-Add-Cascoda-CA8210-6LoWPAN.patch
- 904-MIPS-DTS-img-marduk-Add-partition-name.patch
Enable testing kernel.
Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Wed, 28 Sep 2022 12:12:13 +0000 (14:12 +0200)]
pistachio: 5:15: copy config and patch from 5.10
Copy config and patch from kernel 5.10 to kernel 5.15.
Signed-off-by: Nick Hainke <vincent@systemli.org>
[Updated the copy]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Christian Marangi [Thu, 10 Nov 2022 18:53:15 +0000 (19:53 +0100)]
CI: tools: directly copy prebuilt tools in container
Directly copy prebuilt tools in container instead of creating an
archieve and extracting it later in other workflows.
Update build workflow to support this new implementation.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Fri, 11 Nov 2022 15:50:27 +0000 (16:50 +0100)]
CI: tools: skip including dl dir in prebuilt tools tar
We can now drop the dl dir in the prebuilt tools tar as package archieve
is not a requirement anymore and won't trigger a package recompile.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Fri, 11 Nov 2022 15:40:45 +0000 (16:40 +0100)]
build: skip download for host build with AUTOREMOVE if already compiled
Packages in general use 4 check to trigger a recompile:
- timestamp for the build_dir
- timestamp for the staging stamp dir
- depends hash for the build_dir prepared file
- presence of package archieve in dl
If host tools are prebuilt and shipped in a container or manually
installed from an archieve, it would be ideal to skip including the
package archieve and just provide the build_dir prepared files and the
staging stamp file (and the actualy prebuilt tools).
Add some logic to skip dl download for host tools if AUTOREMOVE is
selected and checks for the presence of staging dir stamp file and build
dir stamp file.
If one of these requirements are not met, the package is redownloaded
and rebuilt.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 10 Nov 2022 18:50:39 +0000 (19:50 +0100)]
scripts: ext-tools: add option to only refresh timestamps
It's possible to have prebuilt tools already extracted. Add option to
just refresh the timestamps.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Fri, 11 Nov 2022 01:32:15 +0000 (02:32 +0100)]
scripts: ext-tools: follow links for host tools path
Host tools path may be a symbolic link. Use -H with find to follow path
links passed from command line to find command.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Robert Marko [Sun, 22 Jan 2023 10:47:23 +0000 (11:47 +0100)]
generic: backport fix for #nvmem-cell-cells false warning
Recent backport of NVMEM layout support as well as acommpanying OF changes
introduced a false #nvmem-cell-cells warning as #nvmem-cell-cells are
fully optional.
So, backport an upstream fix for this.
Fixes: 11759a5bf3c6 ("kernel: backport of changes & helpers")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Rosen Penev [Sat, 21 Jan 2023 22:59:27 +0000 (14:59 -0800)]
CI: tools: add gnu-getopt to macOS CI
This used to be implicit. No longer for some reason.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Christian Marangi [Sun, 22 Jan 2023 18:51:39 +0000 (19:51 +0100)]
rssileds: bump PKG_RELEASE due to libiwinfo ABI change
Bump PKG_RELEASE due to libiwinfo ABI change to trigger a package
rebuild.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sun, 22 Jan 2023 18:50:04 +0000 (19:50 +0100)]
rpcd: bump libiwinfo abi requirement to >= 2023-01-21
Bump libiwinfo abi requirement to >= 2023-01-21 for rpcd.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 23 Jan 2023 12:51:43 +0000 (13:51 +0100)]
iwinfo: update to latest Git HEAD
1e4e709 iwinfo: readd missing define for IWINFO_AUTH in header
Fixes: #11860
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sun, 22 Jan 2023 16:27:04 +0000 (17:27 +0100)]
fstool: bump to latest Git HEAD
1ea5855 partname: Introduce fstools_partname_fallback_scan option
While at it also drop AUTORELEASE from PKG_RELEASE.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Nikolay Martynov [Sat, 7 Jan 2023 03:44:10 +0000 (22:44 -0500)]
ramips: Fix root volume for tplink-er605-v2
This device has two sets of volumes: main ones (`kernel`, `rootfs`, etc) and
'backup' (`kernel.b`, `rootfs.b`, etc). Bootloader tries to determine which set of
volumes to use by looking at contens of `extra-para` and `extra-para.b` volumes.
These volumes contain JSON that looks like this:
```
{
"dbootFlag": "1",
"integerFlag": "1",
"fwFlag": "GOOD",
"score":1
}
```
It looks like the bootloader looks for `"fwFlag": "GOOD"` (as opposed to `BAD`)
then it compares `score` field - whichever 'good' volume has bigger score wins.
This determines which set of volumes to use to boot.
So for example if `extra-para` is good and has bigger score then `kernel`,
`rootfs`, etc volumes are used. This means bootloader needs to explain to the
kernel which volume to use for the rootfs. After looking at bootloader code with
disassembler I think it contains a bug. Relevant part of code looks something
like this:
```
if (image_id == 0) {
rootfs_volume_id = 8;
rootfs_volume_name = "rootfs";
}
else {
rootfs_volume_id = 0xf;
rootfs_volume_name = "rootfs.b";
}
sprintf(
&buffer,
0x800,
"console=ttyS0,115200 noinitrd ubi.mtd=3,2048 ubi.block=0,%s
root=/dev/ubiblock0_%d DKMGT_IMAGE_ID=%d DKMGT_IMAGE_TYPE=ubi",
rootfs_volume_name,
rootfs_volume_id,
image_id
);
```
Where `image_id == 0` if 'normal' (not '*.b' set of volumes is used).
However from device dumps we know that from the factory `rootfs.b` has id 8 and
`rootfs` has id 15.
So from above we can see that ids and names of rootfs volumes do not match. More
over - they are hardcoded in the bootloader.
Both things are problematic for OpwnWRT which completely removes volumes on
update meaning that volume ids may actually change.
So instead of relying on bootloader to provide the kernel with root device this
patch forces kernel to determine root automatically - and it defaults to
`rootfs` volume which is correct for our purposes.
Overall this makes image boot fine from flash after sysupgrade from inirams.
assuming `extra-para*` volumes make bootloader use non-'*.b' set of volumes.
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Alexey Smirnov [Tue, 17 Jan 2023 04:37:59 +0000 (07:37 +0300)]
omap: refresh config
Refresh target config by running:
make kernel_nconfig CONFIG_TARGET=target
Signed-off-by: Alexey Smirnov <s.alexey@gmail.com>
Alexey Smirnov [Mon, 16 Jan 2023 12:34:48 +0000 (15:34 +0300)]
omap: enable ARM Accelerated Cryptographic Algorithms
This selects cryptographic algorithms implemented
using ARM specific CPU features.
Signed-off-by: Alexey Smirnov <s.alexey@gmail.com>
Alexey Smirnov [Mon, 16 Jan 2023 12:21:59 +0000 (15:21 +0300)]
omap: enable cpuidle driver
This enables generic cpuidle driver for ARM.
Signed-off-by: Alexey Smirnov <s.alexey@gmail.com>
Hauke Mehrtens [Tue, 10 Jan 2023 18:50:12 +0000 (19:50 +0100)]
toolchain: musl: Fix symbol loading in gdb
Fix DT_DEBUG handling on MIPS in musl libc.
With this change gdb will load the symbol files for shared libraries on MIPS too.
This patch was taken from this thread: https://www.openwall.com/lists/musl/2022/01/09/4
Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com>
John Audia [Wed, 18 Jan 2023 19:46:43 +0000 (14:46 -0500)]
kernel: bump 5.15 to 5.15.89
Removed upstreamed:
ipq806x/patches-5.15/007-v6.3-ASoC-qcom-lpass-cpu-Fix-fallback-SD-line-index-handl.patch[1]
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.89&id=
d4fa65960a9d0cb87a1102d47145675ceed7a4e6
All other patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
ValdikSS ValdikSS [Fri, 20 Jan 2023 11:41:35 +0000 (14:41 +0300)]
openssl: fix VIA Padlock AES-192 and 256 encryption
Byte swapping code incorrectly uses the number of AES rounds to swap expanded
AES key, while swapping only a single dword in a loop, resulting in swapped
key and partially swapped expanded keys, breaking AES encryption and
decryption on VIA Padlock hardware.
This commit correctly sets the number of swapping loops to be done.
Upstream: https://github.com/openssl/openssl/commit/
2bcf8e69bd92e33d84c48e7d108d3d46b22f8a6d
Acked-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Signed-off-by: ValdikSS ValdikSS <iam@valdikss.org.ru>
INAGAKI Hiroshi [Sat, 24 Dec 2022 12:34:29 +0000 (21:34 +0900)]
realtek: use irq_force_affinity on otto timer instead
After commit
e0d2c59ee995 ("genirq: Always limit the affinity to online
CPUs", 5.10) on Linux, the cpumask passed to irq_set_affinity of irqchip
driver is limited to online CPUs. When irq_do_set_affinity called from
otto timer driver with only one secondary CPU, that CPU is not marked as
online yet, filtered out by cpu_online_mask and fall to error path.
Then, fail to set affinity for that CPU and it leads to instability of
timer on secondary CPU(s).
At least, RTL839x system will be affected.
log:
[ 37.560020] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 37.638025] rcu: 1-...!: (0 ticks this GP) idle=6ac/0/0x0 softirq=0/0 fqs=1 (false positive?)
[ 37.752683] (detected by 0, t=6002 jiffies, g=-1179, q=26293)
[ 37.829510] Sending NMI from CPU 0 to CPUs 1:
[ 37.886857] NMI backtrace for cpu 1 skipped: idling at r4k_wait_irqoff+0x1c/0x24
[ 37.984801] rcu: rcu_sched kthread timer wakeup didn't happen for 5999 jiffies! g-1179 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
[ 38.132743] rcu: Possible timer handling issue on cpu=1 timer-softirq=0
[ 38.221033] rcu: rcu_sched kthread starved for 6000 jiffies! g-1179 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=1
[ 38.356336] rcu: Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior.
[ 38.474440] rcu: RCU grace-period kthread stack dump:
...
Replace to irq_force_affinity from irq_set_affinity and ignore
cpu_online_mask to fix the issue.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Tested-by: Olliver Schinagl <oliver@schinagl.nl>
Linhui Liu [Sun, 15 Jan 2023 04:39:06 +0000 (12:39 +0800)]
toolchain/binutils: add support for version 2.40
Release notes:
https://sourceware.org/pipermail/binutils/2023-January/125671.html
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Linhui Liu [Tue, 17 Jan 2023 01:27:38 +0000 (09:27 +0800)]
trusted-firmware-a.mk: fix build with binutils 2.39+
Starting from version 2.39 binutils now warns about sections with rwx
permissions. While this is generally desirable it breaks building
ARM TrustedFirmware-A bl2 which treats warnings as errors.
Disable the warning/error for now to fix build.
Reference:
0579d9f5bc4b3a3d1b32526c71a6b77c4888bfcb
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Linhui Liu [Sun, 15 Jan 2023 09:48:08 +0000 (17:48 +0800)]
toolchain/binutils: remove old sha256sum
Fixes: b3b0a25ee8cf5f508f06822d53af0b60e3116d8a
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Hannu Nyman [Sun, 27 Nov 2022 20:27:06 +0000 (22:27 +0200)]
dnsmasq: set an increased cachesize default value
Dnsmasq DNS cache size is only 150 by default.
Set the uci default value to 1000, so that cache gets used more
and unnecessary DNS queries to upstream can be avoided.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Chuanhong Guo [Sat, 21 Jan 2023 02:47:59 +0000 (10:47 +0800)]
kernel: mtk-bmt: fix usage of _oob_read
_oob_read returns number of bitflips on success while
bbt_nand_read should return 0.
Fixes: 2d49e49b18 ("mediatek: bmt: use generic mtd api")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Christian Marangi [Sat, 21 Jan 2023 00:26:05 +0000 (01:26 +0100)]
rpcd: update to latest Git HEAD
c0df2a7 iwinfo: add "band" and "mhz" to the scan output
06ad60f iwinfo: add "band" to the freqlist output
b32fd32 iwinfo: add flags to freqlist output
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Sat, 21 Jan 2023 00:23:22 +0000 (01:23 +0100)]
iwinfo: update to latest Git HEAD
Bump ABI to
20230121 due to struct changes
f766138 cli: print the flags on the frequency list
8ee7971 lib: add IWINFO_FREQ_FLAG_NAMES
81184d2 nl80211: fix some comments
2c4ee84 nl80211: prefer non-supplicant-based devices
6194aaf nl80211: simplify iterating over phy's devices
acbf4fe nl80211: remove redundant check in nl80211_phy2ifname()
0172c97 cli: print the frequency and band on the scan list
bbe424f cli: print the band on the frequency list
afa147c nl80211: add "mhz" and "band" to iwinfo_scanlist_entry
0d5ea34 nl80211: add "band" to iwinfo_freqlist_entry
dba0f06 nl80211: add support for radiation and indoor chan restriction
7e3d7de iwinfo: reorganize iwinfo header to enum and defines
9b47b03 devices: add USB devices supported by the mt76 driver
c0fda7c utils: skip comment lines when parsing devices.txt
dbc0ee7 cli: describe USB devices as such
891acee devices: add MediaTek MT7628 card
fac0787 devices: add support for declaring compatible matched devices
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Brian Norris [Fri, 13 Jan 2023 05:32:22 +0000 (21:32 -0800)]
ipq806x: Initial TP-Link and ASUS OnHub support
TP-Link and ASUS OnHub devices are very similar, sharing many of the
same characteristics and much of their Device Tree. They both run a
version of ChromeOS for their factory firmware, and so installation
instructions look very similar to Google Wifi [1].
Things I've tested, and are working:
* Ethernet
* WiFi (2.4 and 5 GHz)
* LEDs
* USB
* eMMC
* Serial console (if you wire it up yourself)
* 2x CPU
* Speaker
== Installation instructions summary ==
1. Flash *-factory.bin to a USB drive (e.g., with `dd`)
2. Insert USB drive, to boot OpenWrt from USB
3. Copy the same *-factory.bin over to device, and flash it to eMMC to
make OpenWrt permanent
== Developer mode, booting from USB (Step 2) ==
To enter Developer Mode and boot OpenWrt from a USB stick:
1. Unplug power
2. Gain access to the "developer switch" through the bottom of the
device
3. Hold down the "reset switch" (near the USB port / power plug)
4. Plug power back in
5. The LED on the device should turn white, then blink orange, then
red. Release the reset switch.
6. Insert USB drive with OpenWrt factory.bin
7. Press the hidden developer switch under the device to boot to USB;
you should see some activity lights (if you have any) on your USB
drive
8. Depending on your configuration, the router's LED(s) should come on.
You're now running OpenWrt off a USB stick.
These instructions are derived from:
https://www.exploitee.rs/index.php/Rooting_The_Google_OnHub#Enabling_%22Developer_Mode%22_on_the_OnHub
https://www.exploitee.rs/index.php/Asus_OnHub#Enabling_%22Developer_Mode%22_on_the_OnHub
~~Finding the developer switch:~~ for TP-Link, the developer switch is
on the bottom of the device, underneath some of the rubber padding and a
screw. For ASUS, remove the entire base, via 4 screws under the rubber
feet. See the Exploitee instructions for more info and photos.
== Making OpenWrt permanent (on eMMC) (Step 3) ==
Once you're running OpenWrt via USB:
1. Connect Ethernet to the LAN port; router's LAN address should be at
192.168.1.1
2. Connect another system to the router's LAN, and copy the factory.bin
image over, via SCP and SSH:
scp -O openwrt-ipq806x-chromium-tplink_onhub-squashfs-factory.bin root@192.168.1.1:
ssh root@192.168.1.1 -C "dd if=/dev/zero bs=512 seek=
7552991 of=/dev/mmcblk0 count=33 && \
dd if=/root/openwrt-ipq806x-chromium-tplink_onhub-squashfs-factory.bin of=/dev/mmcblk0"
3. Reboot and remove the USB drive.
== Developer mode beep ==
Note that every time you boot the OnHub in developer mode, the device
will play a loud "beep" after a few seconds. This is described in the
Chromium docs [2], and is intended to make it clear that the device is
not running Google software. It is nontrivial to completely disable this
beep, although it's possible to "acknowledge" developer mode (and skip
the beep) by using a USB keyboard to press CTRL+D every time you boot.
[1] https://openwrt.org/toh/google/wifi
[2] https://chromium.googlesource.com/chromiumos/docs/+/HEAD/developer_mode.md
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Christian Marangi [Fri, 20 Jan 2023 14:06:11 +0000 (15:06 +0100)]
fstools: bump to latest Git HEAD
e9b59f0 partname: Ignore root=PARTUUID...
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Brian Norris [Fri, 13 Jan 2023 05:32:20 +0000 (21:32 -0800)]
ipq806x: Add kmod-sound-soc-ipq8064-storm
For IPQ8064 systems based off the "Google Storm" reference platform,
such as the TP-Link OnHub.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Brian Norris [Fri, 13 Jan 2023 05:32:19 +0000 (21:32 -0800)]
ipq806x: ASoC: qcom: lpass-cpu: Fix fallback SD line index handling
This fixes device tree registration for 'qcom,lpass-cpu' as used by
qcom-ipq8064 SoCs, and allows speaker audio to function.
This patch has been submitted (and merged, for -next; likely v6.3)
upstream.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Brian Norris [Fri, 13 Jan 2023 05:32:18 +0000 (21:32 -0800)]
ipq806x: config-5.15: Normalize
Refresh target config with `make kernel_menuconfig`, then save the
result. This drops missing symbols or otherwise accounts for defaults.
It should not change any functionality.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Brian Norris [Fri, 13 Jan 2023 05:32:17 +0000 (21:32 -0800)]
ipq806x: Point to externally compiled dtbs in recipes
Similar to commit
4d8b42d8a777 ("ipq40xx: point to externally compiled
dtbs in recipes").
Currently, we patch our DTS files into the kernel source tree, so the
kernel build process will produce DTBs for us. The kernel-to-DTS
dependency can cause buildroot to perform excessive rebuilds of the
kernel though, which slows down device development iteration.
Buildroot also compiles DTBs on its own, to
$(KDIR)/image-$(DEVICE_DTS).dtb. With small adjustments, we can leverage
this, and stop patching DTS files into the kernel Makefile at the same
time.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Brian Norris [Fri, 13 Jan 2023 05:32:16 +0000 (21:32 -0800)]
base-files: Remove nand.sh dependency from emmc upgrade
emmc_do_upgrade() relies on identify() from the nand.sh upgrade helper.
This only works because FEATURES=emmc targets also tend to include
FEATURES=nand.
Rename identify_magic() to identify_magic_long() to match the common.sh
style and make it clear it pairs with other *_long() variants (and not,
say *_word()).
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Brian Norris [Fri, 13 Jan 2023 05:32:21 +0000 (21:32 -0800)]
ucode: update to latest Git HEAD
To bring in isatty() support.
Includes new commits:
be30472bfdbb fs: add `isatty()` function
0a58d510529e nl80211: add support for NL80211_ATTR_MPATH_INFO
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
[ remove additional merge commit ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Josef Schlehofer [Thu, 19 Jan 2023 08:10:41 +0000 (09:10 +0100)]
mvebu: cortexa9: use renamed U-boot binaries
Due to upstream change in U-boot the binaries were renamed [1].
[1] https://source.denx.de/u-boot/u-boot/-/commit/
87ac4b4b4ca5f00e2ddcdac41c9dc691ab2aecf1
Fixes: 2f83369e3e97 ("uboot-mvebu: update to version 2023.01")
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Christian Marangi [Fri, 20 Jan 2023 14:13:21 +0000 (15:13 +0100)]
CI: kernel: enable target testing also for pull request event
Testing target changes was only set for push events. Enable this also
for pull request events to enable testing pr making specific target
changes.
Fixes: 57a02cbbff5b ("CI: kernel: test each target with additional changes than target/linux")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
André Valentin [Tue, 3 Jan 2023 18:23:41 +0000 (19:23 +0100)]
ipq807x: Add ZyXEL NBG7815
ZyXEL NBG7815 is a premium 802.11ax "tri"-band router/AP.
Specifications:
* CPU: Qualcomm IPQ8072A Quad core Cortex-A53 2.2GHz
* RAM: 1 GB 2x Nanya NT5CC256M16ER-EK
* Storage:
* 8MB serial flash Winbond W25Q64DW
* 4GB eMMC flash Kingston EMMC04G-M627
* Ethernet:
* 4x1G RJ45 ports (QCA8074A) with 1x status LED per port
* 1x2.5G RJ45 port (QCA8081) with 1x status LED
* 1x10G RJ45 port (AQR113C) with 1x status LED
* Switch: Qualcomm Atheros QCA8075
* WLAN:
* 2.4GHz: Qualcomm QCN5024 4x4@40MHz 802.11b/g/n/ax 1147 Mbps PHY rate
* 2x 5GHz: Qualcomm QCN5054 4x4 802.11a/b/g/n/ac/ax 2402 PHY rate
* Bluetooth CSR8811 using HSUART, currently unsupported
* USB: 1x USB3.0 Type-A port
* LED-s currently not supported:
* White
* Dark Blu
* Amber
* Purple
* Purple and dark blue
* Red
* Buttons:
* 1x Soft reset
* Power: 12V DC Jack
Installation instructions:
* Disconnect WAN
* Reset device to factory defaults by pushing reset button 15 sec,
LEDs should lit orange color.
* After 5-10 minutes, when the LEDs turn constant dark blue,
put your LAN cable and connect at address 192.168.123.1 by telnet on port 23
* Login with
NBG7815 login: root
password: nbg7815@2019
* cd /tmp/ApplicationData
* wget -O openwrt-ipq807x-generic-zyxel_nbg7815-squashfs-sysupgrade.bin http://...
* wget https://github.com/itorK/nbg7815_tools/blob/main/flash_to_openwrt.sh
* run flash_to_openwrt.sh
If you can't use wget, you can transfer the files via nc.
See https://openwrt.org/inbox/toh/zyxel/nbg7815_armor_g5 for installation details.
Bluetooth usage:
* you need at least package bluez-utils, recommended bluez-daemon
* run following commands to enable and start
hciattach /dev/ttyMSM1 bcsp
hciconfig hci0 up
Many thanks to itorK for his work on this device:
https://github.com/itorK/openwrt/tree/nbg7815
Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: André Valentin <avalentin@marcant.net>
André Valentin [Tue, 17 Jan 2023 22:07:42 +0000 (23:07 +0100)]
ipq807x: add nvmem uboot-env support
Enabling kernel symbol CONFIG_NVMEM_U_BOOT_ENV allows to use u-boot
environement variable ethaddr with nvmen. That way it is possible to assign
the MAC address to the ethernet device driver.
Example of usage in dts:
....
partition@600000 {
compatible = "u-boot,env";
label = "0:appsblenv";
reg = <0x600000 0x10000>;
macaddr_lan: ethaddr {
};
};
....
&dp5 {
status = "okay";
phy-handle = <&qca8081>;
label = "wan";
nvmem-cells = <&macaddr_lan>;
nvmem-cell-names = "mac-address-ascii";
mac-address-increment = <1>;
};
This is needed for Zyxel NBG7815.
Signed-off-by: André Valentin <avalentin@marcant.net>
Christian Marangi [Wed, 18 Jan 2023 11:22:12 +0000 (12:22 +0100)]
bpf: ignore missing LLVM bins on package for non compile steps
To download a package the LLVM bins are not strictly needed.
Currently with an example run of make package/bridger/download V=s, the
build fail with
make[2]: Entering directory '/home/ansuel/openwrt-ansuel/openwrt/package/network/services/bridger'
bash: line 1: /home/ansuel/openwrt-ansuel/openwrt/staging_dir/host/llvm-bpf/bin/clang: No such file or directory
bash: line 1: [: : integer expression expected
/home/ansuel/openwrt-ansuel/openwrt/include/bpf.mk:71: *** ERROR: LLVM/clang version too old. Minimum required: 12, found: . Stop.
make[2]: Leaving directory '/home/ansuel/openwrt-ansuel/openwrt/package/network/services/bridger'
time: package/network/services/bridger/download#0.04#0.00#0.06
ERROR: package/network/services/bridger failed to build.
This is wrong since it may be needed to download the required packages
first and then compile them later.
Fix this by ignoring the LLVM bin check on non compile steps.
Tested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
David Bauer [Wed, 18 Jan 2023 21:06:36 +0000 (22:06 +0100)]
mbedtls: move source modification to patch
Patch the mbedtls source instead of modifying the compile-targets
in the prepare buildstep within OpenWrt.
Signed-off-by: David Bauer <mail@david-bauer.net>
Jo Deisenhofer [Tue, 17 Jan 2023 18:46:04 +0000 (19:46 +0100)]
uboot-mediatek: Fix ramips/mt76x8 buildbot
Move defines from header to defconfig
The package build and the Buildbot hang in 'make syncconfig' for
u-boot-ravpower_rp-wd009 because CONFIG_SYS_MIPS_TIMER_FREQ is not in
the .config, causing a console prompt. Also moved two other defines in
defconfig causing duplicate definition warnings.
Fixes: 3d5c5427e17a ("uboot-mediatek: update to U-Boot 2023.01")
Signed-off-by: Jo Deisenhofer <jo.deisenhofer@gmail.com>
Vincent Tremblay [Tue, 17 Jan 2023 14:02:38 +0000 (09:02 -0500)]
uboot-envtools: ipq40xx: fix WHW03V2 mtd partition
The configured u_env partition for the Linksys WHW03 V2 was not correct.
It should have been set to mtd6.
This fix allow to flash the OEM firmware from OpenWRT and to change the
boot partition using fw_setenv.
Fixes: 9e4ede8344d6 ("ipq40xx: add support for Linksys WHW03 V2")
Signed-off-by: Vincent Tremblay <vincent@vtremblay.dev>
James Andrewartha [Tue, 17 Jan 2023 07:02:02 +0000 (15:02 +0800)]
ipq40xx: convert Extreme AP3915i to DSA
Convert and re-enabled Extreme AP3915i to DSA.
Signed-off-by: James Andrewartha <trs80@ucc.asn.au>
Josef Schlehofer [Thu, 12 Jan 2023 16:27:14 +0000 (17:27 +0100)]
uboot-mvebu: update to version 2023.01
In the version 2023.01, the U-boot image was renamed because of the
upstream change [1]
[1] https://source.denx.de/u-boot/u-boot/-/commit/
87ac4b4b4ca5f00e2ddcdac41c9dc691ab2aecf1
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Nick Hainke [Sun, 15 Jan 2023 18:53:35 +0000 (19:53 +0100)]
libpcap: update to 1.10.3
Changelog:
https://git.tcpdump.org/libpcap/blob/
95691ebe7564afa3faa5c6ba0dbd17e351be455a:/CHANGES
Refresh patch:
- 300-Add-support-for-B.A.T.M.A.N.-Advanced.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Fri, 30 Dec 2022 20:00:10 +0000 (21:00 +0100)]
ipset: update to 7.17
Release notes:
https://lwn.net/Articles/918784/
Signed-off-by: Nick Hainke <vincent@systemli.org>
Rosen Penev [Sat, 7 Jan 2023 08:18:34 +0000 (00:18 -0800)]
include: use libdeflate's gzip to decompress
libdeflate decompresses much faster than gzip.
Example:
~/d/openwrt> time gzip -dc dl/cmake-3.25.1.tar.gz > /dev/null
________________________________________________________
Executed in 1.01 secs fish external
usr time 912.61 millis 1.67 millis 910.94 millis
sys time 32.21 millis 0.25 millis 31.96 millis
~/d/openwrt> time libdeflate-gzip -dc dl/cmake-3.25.1.tar.gz > /dev/null
________________________________________________________
Executed in 523.04 millis fish external
usr time 415.48 millis 1.07 millis 414.41 millis
sys time 107.74 millis 0.15 millis 107.59 millis
~/d/openwrt> time gzip -dc dl/tessdata-4.1.0.tar.gz > /dev/null
________________________________________________________
Executed in 8.99 secs fish external
usr time 8.90 secs 530.00 micros 8.90 secs
sys time 0.07 secs 63.00 micros 0.07 secs
~/d/openwrt> time libdeflate-gzip -dc dl/tessdata-4.1.0.tar.gz > /dev/null
________________________________________________________
Executed in 2.74 secs fish external
usr time 2.38 secs 537.00 micros 2.38 secs
sys time 0.35 secs 66.00 micros 0.35 secs
Place libdeflate into tools-core as it is needed to decompress other
archives.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Olliver Schinagl [Fri, 13 Jan 2023 09:50:30 +0000 (10:50 +0100)]
libdeflate: Avoid circular dependencies
CMake depends on (libdeflate-)gunzip, libdeflate depends on Cmake, so we
can't win.
Luckily libdeflate is _very_ easy to build, without any build system, so
lets just manually compile it and be done with it.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Olliver Schinagl [Sun, 15 Jan 2023 14:28:59 +0000 (15:28 +0100)]
libdeflate: Update to v1.17
The new version of libdeflate makes it a little easier to build it
without any build system.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Olliver Schinagl [Tue, 17 Jan 2023 19:54:05 +0000 (20:54 +0100)]
tools: Improve diffability/maintainability
Like with commit
ae614fb397c2 ("tools: Improve diffability/maintainability")
we also want tools-core to be easy to maintain. While a smaller target,
it's still usefull and makes things nice and consistent.
To avoid duplicating any tools in the comment, simplify the comment
instead.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Tony Butler [Tue, 29 Nov 2022 01:37:20 +0000 (17:37 -0800)]
build: fix incomplete initramfs compression options
Requires: tools/lz4, tools/lzop
complete the wiring so that these options work:
* `CONFIG_KERNEL_INITRAMFS_COMPRESSION_LZO`
* `CONFIG_KERNEL_INITRAMFS_COMPRESSION_LZ4`
Signed-off-by: Tony Butler <spudz76@gmail.com>
[remove blocking dependencies for separate ramdisk, fix lzop options]
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Tony Butler [Tue, 29 Nov 2022 01:32:11 +0000 (17:32 -0800)]
tools/lzop: add `lzop` binaries
Depends: `tools/liblzo`
`lzop` is the standard executable for LZO compression
the initramfs generator offers the LZO option but there was no
executable to support it actually working
Signed-off-by: Tony Butler <spudz76@gmail.com>
Tony Butler [Tue, 29 Nov 2022 01:06:46 +0000 (17:06 -0800)]
tools/liblzo: add `liblzo` library
prerequisite of upcoming `tools/lzop` addition, and subsequent initramfs
and squashfs cleanups
same as `packages/lzo` modified to be a HOST/tools type build,
and should always be the same version and sources when either one is
bumped
because this (and `packages/lzo`) only provide liblzo and no
executables, use the clearer name `tools/liblzo`
Signed-off-by: Tony Butler <spudz76@gmail.com>
projects / openwrt / staging / rmilecki.git / log