Rafał Miłecki [Tue, 5 Jul 2011 21:54:07 +0000 (23:54 +0200)]
b43: make b43_wireless_init bus generic
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Fri, 8 Jul 2011 15:05:20 +0000 (11:05 -0400)]
Merge branch 'for-linville' of git://git./linux/kernel/git/luca/wl12xx
Arik Nemtsov [Thu, 7 Jul 2011 11:25:23 +0000 (14:25 +0300)]
wl12xx: start/stop queues according to global per-AC counters
Split tx_queue_count to count per-AC skb's queued, instead of relying on
the skb-queue len. The skb queues used were only valid in STA-mode, as
AP-mode uses per-link queues.
This fixes a major regression in AP-mode, caused by the patch
"wl12xx: implement Tx watermarks per AC". With that patch applied, we
effectively had no regulation of Tx queues in AP-mode. Therefore a
sustained high rate of Tx could cause exhaustion of the skb memory pool.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Gertjan van Wingerde [Wed, 6 Jul 2011 21:00:21 +0000 (23:00 +0200)]
rt2x00: Implement tx_frames_pending mac80211 callback function.
Implementing this callback function will cause mac80211 refrain from
going to powersave state when there are still untransmitted TX frames
in the queues.
This would exactly mimic the behaviour of the legacy vendor driver which
also doesn't go in powersave mode if there are still TX frames that are not
transmitted.
This should make powersaving and rt2x00 a better couple.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Gertjan van Wingerde [Wed, 6 Jul 2011 20:59:19 +0000 (22:59 +0200)]
rt2x00: Properly identify rt2800usb devices.
Sitecom WLA4000 (USB ID 0x0df6:0x0060) is an RT3072 chipset.
Sitecom WLA5000 (USB ID 0x0df6:0x0062) is an RT3572 chipset.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Gertjan van Wingerde [Wed, 6 Jul 2011 20:58:55 +0000 (22:58 +0200)]
rt2x00: Add device ID for RT539F device.
Reported-by: Wim Vander Schelden <wim@fixnum.org>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Gertjan van Wingerde [Wed, 6 Jul 2011 20:57:37 +0000 (22:57 +0200)]
rt2x00: Reduce window of a queue's tx lock.
Currently a lot of actions that can be done without the queue's tx lock
being held are done inside the locked area.
Move them out to have a leaner and meaner code that operates while the
tx lock is being held.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Gertjan van Wingerde [Wed, 6 Jul 2011 20:57:00 +0000 (22:57 +0200)]
rt2x00: Don't use queue entry as parameter when creating TX descriptor.
The functions that create the tx descriptor structure do not operate on
a queue entry at all. Signal this fact in the code by not providing a
queue entry as a parameter, but the rt2x00 device structure and the skb
directly.
This patch is a preparation for reducing the time a queue is locked for
a tx operation.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Gertjan van Wingerde [Wed, 6 Jul 2011 20:56:24 +0000 (22:56 +0200)]
rt2x00: Serialize TX operations on a queue.
The rt2x00 driver gets frequent occurrences of the following error message
when operating under load:
phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the
non-full queue 2.
This is caused by simultaneous attempts from mac80211 to send a frame via
rt2x00, which are not properly serialized inside rt2x00queue_write_tx_frame,
causing the second frame to fail sending with the above mentioned error
message.
Fix this by introducing a per-queue spinlock to serialize the TX operations
on that queue.
Reported-by: Andreas Hartmann <andihartmann@01019freenet.de>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Tue, 5 Jul 2011 17:48:26 +0000 (19:48 +0200)]
bcma: detect PCI core working in hostmode
We must not init it like clientmode one, it would break device (tested
by Hauke on BCM4718). Add stub hostmode driver for now.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Amitkumar Karwar [Wed, 6 Jul 2011 01:01:11 +0000 (18:01 -0700)]
mwifiex: modify SDIO aggregation Tx/Rx buffer size
The SDIO aggregation buffer size has been modified to an optimum
value which gives good throughput results.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jean Delvare [Tue, 5 Jul 2011 22:27:06 +0000 (00:27 +0200)]
ipw2100: Fix command list for debugging
There is a stray "undefined" string in the array, get rid of it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Tue, 5 Jul 2011 14:35:41 +0000 (16:35 +0200)]
mac80211: support GTK rekey offload
This adds the necessary mac80211 APIs to support
GTK rekey offload, mirroring the functionality
from cfg80211.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Tue, 5 Jul 2011 14:35:40 +0000 (16:35 +0200)]
cfg80211/nl80211: support GTK rekey offload
In certain circumstances, like WoWLAN scenarios,
devices may implement (partial) GTK rekeying on
the device to avoid waking up the host for it.
In order to successfully go through GTK rekeying,
the KEK, KCK and the replay counter are required.
Add API to let the supplicant hand the parameters
to the driver which may store it for future GTK
rekey operations.
Note that, of course, if GTK rekeying is done by
the device, the EAP frame must not be passed up
to userspace, instead a rekey event needs to be
sent to let userspace update its replay counter.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Tue, 5 Jul 2011 14:35:39 +0000 (16:35 +0200)]
mac80211: allow driver to iterate keys
When in suspend/wowlan, devices might implement crypto
offload differently (more features), and might require
reprogramming keys for the WoWLAN (as it is the case
for Intel devices that use another uCode image). Thus
allow the driver to iterate all keys in this context.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jon Mason [Thu, 30 Jun 2011 15:42:47 +0000 (10:42 -0500)]
iwlwifi: remove unnecessary read of PCI_CAP_ID_EXP
The PCIE capability offset is saved during PCI bus walking. It will
remove an unnecessary search in the PCI configuration space if this
value is referenced instead of reacquiring it.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Wed, 6 Jul 2011 19:03:16 +0000 (15:03 -0400)]
Merge branch 'for-linville' of git://git./linux/kernel/git/luca/wl12xx
Sergei Shtylyov [Fri, 1 Jul 2011 18:34:42 +0000 (22:34 +0400)]
ssb: use pci_dev->subsystem_{vendor,device}
The SSB code reads PCI subsystem IDs from the PCI configuration registers while
they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}'
fields of 'struct pci_dev'...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sergei Shtylyov [Fri, 1 Jul 2011 18:33:08 +0000 (22:33 +0400)]
ssb: use pci_dev->revision
The SSB code reads PCI revision ID from the PCI configuration register while
it's already stored by the PCI subsystem in the 'revision' field of 'struct
pci_dev'...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Michael Büsch [Mon, 4 Jul 2011 17:51:11 +0000 (19:51 +0200)]
b43: Add RX side DMA memory barrier
This adds a memory barrier to ensure the writes to the ring memory
are committed before the DMA ring pointer is updated.
We do a similar thing on the TX side already.
Signed-off-by: Michael Buesch <m@bues.ch>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Aloisio Almeida Jr [Fri, 1 Jul 2011 22:31:38 +0000 (19:31 -0300)]
NFC: add Documentation/networking/nfc.txt
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Aloisio Almeida Jr [Fri, 1 Jul 2011 22:31:37 +0000 (19:31 -0300)]
NFC: pn533: add NXP pn533 nfc device driver
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Lauro Ramos Venancio [Fri, 1 Jul 2011 22:31:36 +0000 (19:31 -0300)]
NFC: add the NFC socket raw protocol
This socket protocol is used to perform data exchange with NFC
targets.
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Aloisio Almeida Jr [Fri, 1 Jul 2011 22:31:35 +0000 (19:31 -0300)]
NFC: add NFC socket family
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Lauro Ramos Venancio [Fri, 1 Jul 2011 22:31:34 +0000 (19:31 -0300)]
NFC: add nfc generic netlink interface
The NFC generic netlink interface exports the NFC control operations
to the user space.
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Lauro Ramos Venancio [Fri, 1 Jul 2011 22:31:33 +0000 (19:31 -0300)]
NFC: add nfc subsystem core
The NFC subsystem core is responsible for providing the device driver
interface. It is also responsible for providing an interface to the control
operations and data exchange.
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Fri, 1 Jul 2011 22:02:01 +0000 (00:02 +0200)]
mac80211: allow driver to impose WoWLAN restrictions
If the driver can't support WoWLAN in the current
state, this patch allows it to return 1 from the
suspend callback to do the normal deconfiguration
instead of using suspend/resume calls. Note that
if it does this, resume won't be called.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sergei Shtylyov [Fri, 1 Jul 2011 18:35:28 +0000 (22:35 +0400)]
ssb: PCI revision ID register is 8-bit wide
The SSB code reads PCI revision ID register as 16-bit entity while the register
is actually 8-bit only (the next 8 bits are the programming interface register).
Fix the read and make the 'rev' field of 'struct ssb_boardinfo' 8-bit as well,
to match the register size.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Fri, 1 Jul 2011 13:56:11 +0000 (08:56 -0500)]
rtlwifi: rtl8192de: Fix error exit from hw_init
In routine rtl92de_hw_init(), there are two places where a failure is
not handled correctly.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Fri, 1 Jul 2011 13:50:48 +0000 (08:50 -0500)]
rtlwifi: rtl8192de: Replace loops calling udelay with single mdelay
There are a number of loops to implement delays. These are replaced with
single calls to mdelay().
The need for a fix was noted by Andrew Morton <akpm@linux-foundation.org>.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Fri, 1 Jul 2011 13:28:22 +0000 (15:28 +0200)]
carl9170: use carl9170 queue enums
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Thu, 30 Jun 2011 21:47:11 +0000 (16:47 -0500)]
rtlwifi: rtl8192de: Remove comparison of boolean with true
Tests of a boolean against "true" are not needed as non-zero is sufficient..
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mike McCormack [Thu, 30 Jun 2011 21:46:14 +0000 (16:46 -0500)]
rtlwifi: rtl8192{ce,cu,se} Remove irq_enabled
This should be unnecessary if synchronize_irq is used.
Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Thu, 30 Jun 2011 21:44:47 +0000 (16:44 -0500)]
rtlwifi: rtl8192de: Remove irq_enabled boolean
Prepare rtl8192de for the removal of irq_enaqbled.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Andrew Morton [Thu, 30 Jun 2011 21:28:50 +0000 (16:28 -0500)]
drivers/net/wireless/rtlwifi/rtl8192de/phy.c: fix udelay() usage
ERROR: "__bad_udelay" [drivers/net/wireless/rtlwifi/rtl8192de/rtl8192de.ko] undefined!
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Thu, 30 Jun 2011 19:08:43 +0000 (21:08 +0200)]
mac80211: fix smatch complains
mlme.c
l.757 ieee80211_dynamic_ps_enable_work(11)
variable dereferenced before check 'sdata'
mesh_pathtbl.c
l.650 mesh_path_del(20) double lock 'bottom_half'
l.663 mesh_path_del(33) double unlock 'bottom_half'
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Thu, 30 Jun 2011 18:34:54 +0000 (20:34 +0200)]
carl9170: allow PSM if the 5 GHz band is selected
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Thu, 30 Jun 2011 18:31:34 +0000 (20:31 +0200)]
carl9170: enable IEEE80211_HW_NEED_DTIM_PERIOD
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Christian Lamparter [Thu, 30 Jun 2011 18:27:47 +0000 (20:27 +0200)]
carl9170: import 1.9.4 firmware headers
This patch imports all shared header changes
from carl9170fw.git.
* update copyright boilerplate
* add some more strategic __aligned(4).
* WoWLAN
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jesper Juhl [Wed, 29 Jun 2011 20:49:33 +0000 (22:49 +0200)]
net, wireless: Don't return uninitialized in __cfg80211_stop_sched_scan()
If the 'driver_initiated' function argument to
__cfg80211_stop_sched_scan() is not 0 then we'll return an
uninitialized 'err' from the function.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Yogesh Ashok Powar [Tue, 28 Jun 2011 13:11:37 +0000 (18:41 +0530)]
mac80211: Skip tailroom reservation for full HW-crypto devices with race fix
Based on inputs from Johannes Berg <johannes@sipsolutions.net>
from http://article.gmane.org/gmane.linux.kernel.wireless.general/68193
and http://article.gmane.org/gmane.linux.kernel.wireless.general/71702
In xmit path, devices that do full hardware crypto (including
MMIC and ICV) need no tailroom. For such devices, tailroom
reservation can be skipped if all the keys are programmed into
the hardware (i.e software crypto is not used for any of the
keys) and none of the keys wants software to generate Michael
MIC and IV.
v2: Added check for IV along with MMIC.
Reported-by: Fabio Rossi <rossi.f@inwind.it>
Tested-by: Fabio Rossi <rossi.f@inwind.it>
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Cc: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
v3: Fixing races to avoid WARNING: at net/mac80211/wpa.c:397
ccmp_encrypt_skb+0xc4/0x1f0
Reported-by: Andreas Hartmann <andihartmann@01019freenet.de>
Tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
v4: Added links with message ID
Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arik Nemtsov [Mon, 27 Jun 2011 19:06:34 +0000 (22:06 +0300)]
wl12xx: always initialize AP-mode max power level
Sometimes we only get the Tx power level via op->config when the FW is
off. Record the received power level when this happens and use it to
initialize the firmware during boot.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Arik Nemtsov [Mon, 27 Jun 2011 19:06:33 +0000 (22:06 +0300)]
wl12xx: initialize max_power levels for 11a channels
Set the maximum FW supported power levels for 11a channels.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Mon, 27 Jun 2011 10:06:45 +0000 (13:06 +0300)]
wl12xx: implement cancel_hw_scan() callback
After implementing cancel_hw_scan(), there is no more need to
flush scan_complete_work on suspend.
scan_complete_work enqueues a new scan_work, that might lead
to the following warning (if the device was already suspended):
WARNING: at drivers/mmc/core/core.c:169 mmc_wait_for_req+0x1ac/0x2c8()
Backtrace:
[<
c004b50c>] (dump_backtrace+0x0/0x110)
[<
c04fda50>] (dump_stack+0x0/0x1c)
[<
c008f700>] (warn_slowpath_common+0x0/0x6c)
[<
c008f76c>] (warn_slowpath_null+0x0/0x2c)
[<
c034b058>] (mmc_wait_for_req+0x0/0x2c8)
[<
c034f804>] (mmc_io_rw_extended+0x0/0x1e4)
[<
c0350b5c>] (sdio_io_rw_ext_helper+0x0/0x1ac)
[<
c0350e00>] (sdio_memcpy_fromio+0x0/0x2c)
[<
bf194464>] (wl1271_sdio_raw_read+0x0/0x1bc [wl12xx_sdio])
[<
bf15ac14>] (wl1271_cmd_wait_for_event_or_timeout+0x0/0x19c [wl12xx])
[<
bf15adb0>] (wl1271_cmd_wait_for_event+0x0/0x30 [wl12xx])
[<
bf15b7dc>] (wl1271_cmd_disconnect+0x0/0x14c [wl12xx])
[<
bf158fd0>] (wl1271_unjoin+0x0/0x48 [wl12xx])
[<
bf159070>] (wl1271_op_config+0x0/0x490 [wl12xx])
[<
bf105084>] (ieee80211_hw_config+0x0/0x14c [mac80211])
[<
bf113120>] (ieee80211_recalc_idle+0x0/0x4c [mac80211])
[<
bf109a70>] (__ieee80211_scan_completed+0x0/0x1ac [mac80211])
[<
bf109fd4>] (ieee80211_scan_work+0x0/0x484 [mac80211])
[<
c00a197c>] (worker_thread+0x0/0x1e8)
[<
c00a5874>] (kthread+0x0/0x90)
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Mon, 27 Jun 2011 10:06:44 +0000 (13:06 +0300)]
wl12xx: add stop_scan command
define wl1271_scan_stop() to cancel an ongoing hw scan.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Eliad Peller [Mon, 27 Jun 2011 10:06:43 +0000 (13:06 +0300)]
wl12xx: configure suspend/resume only if associated/started
Configure the device (to wowlan) only if the sta/ap
is associated/started.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Ohad Ben-Cohen [Sun, 26 Jun 2011 15:00:11 +0000 (18:00 +0300)]
wl12xx: one SDIO initialization is enough
Skip manual device power on in case runtime PM is enabled for
our device.
This eliminates a secondary & redundant SDIO init sequence.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Arik Nemtsov [Fri, 24 Jun 2011 10:03:37 +0000 (13:03 +0300)]
wl12xx: implement Tx watermarks per AC
Each AC is stopped when its queue is filled up to the high watermark,
and restarted when its queue it lower than the low watermark. This
ensures congested ACs are not able to starve other ACs.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Ido Yariv [Fri, 24 Jun 2011 10:03:36 +0000 (13:03 +0300)]
wl12xx: Increase low & high TX watermarks
The current TX watermark settings cause the driver to stop queues too
frequently. Among other things, this can have a negative impact on WMM
prioritization, since mac80211 sorts pending packets by their ACs.
Fix this by increasing the high watermark to 256 packets. Increase the
low watermark to 32 to minimize periods with queues being stopped.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Arik Nemtsov [Fri, 24 Jun 2011 10:03:35 +0000 (13:03 +0300)]
wl12xx: schedule TX packets according to FW occupancy
When selecting packets for transmission, prefer the ACs that are least
occupied in the FW. When packets for multiple ACs are present in the FW,
it decides which to transmit according to WMM QoS parameters.
With these changes, lower priority ACs should not be starved when higher
priority traffic is present.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Arik Nemtsov [Sun, 26 Jun 2011 07:36:04 +0000 (10:36 +0300)]
wl12xx: use 802.11 header location after relocation to frame start
When operating with TKIP encryption, the function wl1271_tx_fill_hdr()
relocates the 802.11 header to the start of the frame, and leaves room
for the security header.
Some functions in the Tx path rely on the location of the header,
namely, for purposes of roaming in STA mode and connecting new stations
in AP mode. Call these functions only after the header is relocated.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Arik Nemtsov [Sun, 26 Jun 2011 07:36:03 +0000 (10:36 +0300)]
wl12xx: AP mode - support FW TX inactivity triggers
In AP mode we register for the MAX_TX_RETRY and INACTIVE_STA events.
Both are reported to the upper layers as a TX failure in the offending
stations.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Oz Krakowski [Sun, 26 Jun 2011 07:36:02 +0000 (10:36 +0300)]
wl12xx: fix Tx security sequence number handling
Do not reset the security sequence number when issuing a join command or
interface is removed. Instead, reset the counter only during the unjoin
command.
Added the notion of counter wrap-around to the LSB number in
wl1271_tx_complete_packet.
Added post recovery padding to adjust for potential security number
progress during the recovery process by the firmware and avoid
potential interop issues in encrypted networks.
Signed-off-by: Oz Krakowski <ozk@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Emmanuel Grumbach [Tue, 28 Jun 2011 20:13:59 +0000 (13:13 -0700)]
iwlagn: remove the indirection for the rx write pointer
Not needed since the driver split.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Fri, 1 Jul 2011 14:59:26 +0000 (07:59 -0700)]
iwlagn: remove hcmd ops
All "agn" devices use the same hcmd functions, no need to call indirectly.
remove hcmd_ops
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Tue, 28 Jun 2011 18:46:28 +0000 (11:46 -0700)]
iwlagn: call bt_coex directlly
Call the 2-wire and advanced bt-coex function directly to avoid mistake
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Tue, 28 Jun 2011 15:01:12 +0000 (08:01 -0700)]
iwlagn: scd memory boundary
Assign memory boundary for SCD context, tx status and translation table
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Tue, 28 Jun 2011 15:58:41 +0000 (08:58 -0700)]
iwlagn: move the tx allocation funcs to the transport layer
These functions allocate all the Tx context. Only the simple tx_init is exported as API.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Tue, 21 Jun 2011 11:25:45 +0000 (14:25 +0300)]
iwlagn: add rx_free to transport layer
The transport layer ness to release all rx ressources. This function is an API for it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Emmanuel Grumbach [Tue, 14 Jun 2011 07:13:24 +0000 (10:13 +0300)]
iwlagn: introduce transport layer and implement rx_init
The transport layer is responsible for all the queues, DMA rings etc...
This is the beginning of the separation of all the code that is tighly
related to HW design to the aforementioned transport layer.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Sat, 25 Jun 2011 16:17:41 +0000 (09:17 -0700)]
iwlagn: add module parameter to disable stuck queue watchdog timer
Add the parameter to disable stuck queue watchdog timer, different platforms
might have different timing. Provide the option to disable the timer to prevent
un-necessary firmware reload.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Fri, 1 Jul 2011 14:47:59 +0000 (07:47 -0700)]
iwlagn: add correct firmware name for 135 series
135 series are WiFi/BT combo and require different uCode from 105 series.
[A
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Wey-Yi Guy [Fri, 24 Jun 2011 16:02:44 +0000 (09:02 -0700)]
iwlagn: re-define the testmode cmd and attr enum
To make sure not having issues when adding new testmode commands or attributes
in the future, re-define the enum. no functional changes
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Johannes Berg [Mon, 27 Jun 2011 13:06:42 +0000 (06:06 -0700)]
iwlagn: verify mutex held for sync commands
Emmanuel noticed that there's no explicit checking
that prevents the driver from attempting to issue
multiple synchronous commands at the same time and
wrote a patch to check. However, his patch warns
only if a collision actually happened, an unlikely
thing since the driver mutex should be held for
synchronous command submissions.
So instead of checking that a collision happened
add a check that the mutex is held which ensures
that collisions can't happen.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Dan Carpenter [Wed, 29 Jun 2011 06:31:49 +0000 (09:31 +0300)]
rtlwifi: potential forever loop in rtl92de_hw_init()
"i" should be an int here because we are trying to use it to count
to 10000. The original code looks like it could hang in a forever
loop.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Larry Finger [Tue, 28 Jun 2011 23:55:50 +0000 (18:55 -0500)]
rtlwifi: rtl8192de: Fix build errors when using allyes configuration
After adding rtl8192de to linux-next, making the rtlwifi drivers be built-in
results in the following warnings:
LD drivers/net/wireless/rtlwifi/built-in.o
drivers/net/wireless/rtlwifi/rtl8192de/built-in.o: In function `rtl92ce_sw_led_on':
(.text+0x11fb6): multiple definition of `rtl92ce_sw_led_on'
drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.text+0xa326): first defined here
drivers/net/wireless/rtlwifi/rtl8192de/built-in.o:(.bss+0x0): multiple definition of `dm_digtable'
drivers/net/wireless/rtlwifi/rtl8192c/built-in.o:(.bss+0x0): first defined here
ld: Warning: size of symbol `dm_digtable' changed from 40 in drivers/net/wireless/rtlwifi/rtl8192c/built-in.o to 48 in drivers/net/wireless/rtlwifi/rtl8192de/built-in.o
drivers/net/wireless/rtlwifi/rtl8192de/built-in.o: In function `rtl92ce_sw_led_off':
(.text+0x11cfe): multiple definition of `rtl92ce_sw_led_off'
drivers/net/wireless/rtlwifi/rtl8192ce/built-in.o:(.text+0xa06e): first defined here
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Tue, 28 Jun 2011 22:56:49 +0000 (00:56 +0200)]
b43: HT-PHY: correct 0x2059 radio init
Sometimes additional steps are performed while initializing 2059 radio.
We did not find the condition yet, so make it always true for now.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mohammed Shafi Shajakhan [Tue, 28 Jun 2011 14:43:41 +0000 (20:13 +0530)]
ath9k_htc: Add device ID for Sony UWA-BR100
for more details please take a look at:
http://comments.gmane.org/gmane.linux.drivers.ath9k.devel/6541
http://www.wikidevi.com/wiki/Sony_UWA-BR100
Reported-by: Thomas Novin <thomas@xyz.pp.se>
Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mohammed Shafi Shajakhan [Tue, 28 Jun 2011 12:00:54 +0000 (17:30 +0530)]
ath9k: move few descriptor macros to ath9k.h
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Tue, 28 Jun 2011 07:28:39 +0000 (09:28 +0200)]
b43: HT-PHY: basic PHY init
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Tue, 28 Jun 2011 07:28:38 +0000 (09:28 +0200)]
b43: HT-PHY: add init tables
They were written from observing MMIO writes to registers 0x72 0x74 and
0x73 right after phy_write(0x017e) <- 0x3830 which finishes chennel
switching. RegExps were used to translate writes to arrays.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Mon, 27 Jun 2011 22:08:53 +0000 (00:08 +0200)]
b43: HT-PHY: init radio when enabling it
Masks and sets were found in MMIO dumps by using MMIO hacks. Shortly:
radio_write(0x0c51) <- 0x0070
radio_write(0x0c5a) <- 0x0003
radio_write(0x0146) <- 0x0003
radio_write(0x0546) <- 0x0003
radio_write(0x0946) <- 0x0003
radio_write(0x002e) <- 0x0078
radio_write(0x00c0) <- 0x0080
radio_write(0x002e) <- 0xff87
radio_write(0x00c0) <- 0xff7f
radio_write(0x0011) <- 0xfff7
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Mon, 27 Jun 2011 22:08:52 +0000 (00:08 +0200)]
b43: HT-PHY: replace radio routing magic numbers
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arik Nemtsov [Mon, 27 Jun 2011 20:58:46 +0000 (23:58 +0300)]
wl12xx: AP-mode - use mac80211 indication about STA WME support
When adding a station, use the information given in the mac80211
populated ieee80211_sta structure to determine if it supports WME.
Provide this information to the FW.
This patch depends on "mac80211: propagate information about
STA WME support down".
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arik Nemtsov [Mon, 27 Jun 2011 20:58:45 +0000 (23:58 +0300)]
mac80211: propagate information about STA WME support down
Add a memeber to the ieee80211_sta structure to indicate whether the STA
supports WME.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jon Mason [Mon, 27 Jun 2011 18:03:44 +0000 (13:03 -0500)]
rtlwifi: use PCI_VENDOR_ID_*
Use PCI_VENDOR_ID_* from pci_ids.h instead of creating #define locally.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jon Mason [Mon, 27 Jun 2011 17:50:14 +0000 (12:50 -0500)]
rtlwifi: remove unnecessary read of PCI_CAP_ID_EXP
The PCIE capability offset is saved during PCI bus walking. It will
remove an unnecessary search in the PCI configuration space if this
value is referenced instead of reacquiring it.
Also, remove unnecessary and unused #defines for PCI.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Jon Mason [Mon, 27 Jun 2011 17:48:54 +0000 (12:48 -0500)]
iwlegacy: remove unnecessary read of PCI_CAP_ID_EXP
The PCIE capability offset is saved during PCI bus walking. It will
remove an unnecessary search in the PCI configuration space if this
value is referenced instead of reacquiring it.
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Mon, 27 Jun 2011 13:04:47 +0000 (15:04 +0200)]
b43: HT-PHY: implement lacking 0x908 PHY reg op
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Mon, 27 Jun 2011 12:58:54 +0000 (14:58 +0200)]
b43: HT-PHY: add channel switching tables for 2 GHz band
Tables were taken from observing writes in MMIO dumps.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Mon, 27 Jun 2011 12:58:52 +0000 (14:58 +0200)]
b43: HT-PHY: perform some tables ops on channel switching
Starring at MMIO dumps around PHY channel switching has led to finding
serie of 3 similar ops this patch implements.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Mon, 27 Jun 2011 12:58:51 +0000 (14:58 +0200)]
b43: HT-PHY: upload PHY values when switching channel
After calibrating radio you can find few PHY writes in MMIO dumps:
phy_read(0x0009) -> 0x0000
phy_write(0x01ce) <- 0x03dd
phy_write(0x01cf) <- 0x03d9
phy_write(0x01d0) <- 0x03d5
phy_write(0x01d1) <- 0x0424
phy_write(0x01d2) <- 0x0429
phy_write(0x01d3) <- 0x042d
By comparing to N-PHY code we found out that they are PHY tables for
channel switching plus band info read at the beginning.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rafał Miłecki [Mon, 27 Jun 2011 12:58:50 +0000 (14:58 +0200)]
b43: HT-PHY: prepare place for HT-PHY tables
They are big arrays uploaded to the hardware on init, calibration, etc.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
John W. Linville [Tue, 28 Jun 2011 17:53:32 +0000 (13:53 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6
Conflicts:
drivers/net/wireless/iwlwifi/iwl-tx.c
John W. Linville [Mon, 27 Jun 2011 19:38:05 +0000 (15:38 -0400)]
iwlagn: use PCI_DMA_* for pci_* operations
"iwlagn: map command buffers BIDI" uses the DMA_* enumerations for DMA
directions, even though the pci_* DMA API is still in use. That patch
was undoubtedly developed on top of "iwlagn: don't use the PCI wrappers
for DMA operation", which is due in the next release.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arik Nemtsov [Sun, 26 Jun 2011 09:06:54 +0000 (12:06 +0300)]
mac80211: dynamic PS - don't enter PS when TX frames are pending
Use the tx_frames_pending() driver callback to determine if Tx frames are
pending for its internal queues. If so postpone the dynamic PS timeout
to avoid interrupting Tx traffic.
The commit
e8306f989483e4b97a8b37dd268de6c8c6f35e75 enabled this
behavior for drivers with IEEE80211_HW_PS_NULLFUNC_STACK. We enable this
for all drivers supporting dynamic PS.
This patch helps improve performance in noisy environments.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Geert Uytterhoeven [Sun, 26 Jun 2011 08:19:44 +0000 (10:19 +0200)]
bcma: main.c needs to include <linux/slab.h>
m68k allmodconfig:
drivers/bcma/main.c: In function ‘bcma_release_core_dev’:
drivers/bcma/main.c:68: error: implicit declaration of function ‘kfree’
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
--
http://kisskb.ellerman.id.au/kisskb/buildresult/
4243344/
drivers/bcma/main.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sergei Shtylyov [Fri, 24 Jun 2011 15:39:37 +0000 (19:39 +0400)]
iwlwifi: use pci_dev->revision, again
Commit
ff938e43d39e926de74b32a3656c190f979ab642 (net: use pci_dev->revision,
again) already converted this driver to using the 'revision' field of 'struct
pci_dev' but commit
084dd79172cb3aad11d2b7ee5628d57badca7c6e (iwlagn: move PCI
related operations from probe and remove to PCI layer) has again added the code
to read the PCI revision ID register...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Dan Carpenter [Fri, 24 Jun 2011 13:33:35 +0000 (16:33 +0300)]
mwifiex: restore handling of NULL parameters
Prior to
a5ffddb70c5cab "mwifiex: remove casts of void pointers" the
code assumed that the data_buf parameter could be a NULL pointer.
The patch preserved some NULL checks but not consistently, so there
was a potential for NULL dereferences and it changed the behavior.
This patch restores the original behavior.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Fri, 24 Jun 2011 12:08:13 +0000 (17:38 +0530)]
ath9k: Fix locking issue during tx completion
The received tx status of aggregated frame without BlockAck may
cause deaf state in AR5416 cards. So the driver does a reset to
recover. When this happens, we release the pcu_lock before doing
a reset as ath_rest acquires pcu_lock. This is ugly and also not
atomic. Fixing this addresses the TX DMA failure also.
ath_tx_complete_aggr can be called from different paths which
takes different variants of spin_lock. This patch also addresses
the following warning.
WARNING: at kernel/timer.c:1011 del_timer_sync+0x4e/0x50()
Call Trace:
<IRQ> [<
ffffffff8104be3a>] warn_slowpath_common+0x7a/0xb0
[<
ffffffff8104be85>] warn_slowpath_null+0x15/0x20
[<
ffffffff8105915e>] del_timer_sync+0x4e/0x50
[<
ffffffffa03726be>] ath_reset+0x3e/0x210 [ath9k]
[<
ffffffff8135cdaf>] ? _raw_spin_unlock_bh+0x1f/0x30
[<
ffffffffa037760a>] ath_tx_complete_aggr.isra.26+0x54a/0xa40 [ath9k]
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Stanislaw Gruszka [Fri, 24 Jun 2011 09:34:34 +0000 (11:34 +0200)]
iwlagn: fix rmmod crash
priv->bus.bus_specific pointer is used after priv structures was freed,
in iwl_pci_remove(), what make ugly rmmod crash. This bug was introduced
by current pci changes.
On the way remove fake check, if prober error code is returned from
.probe() function, .remove() will never be called be null drvdata.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Joe Perches [Thu, 23 Jun 2011 22:35:18 +0000 (15:35 -0700)]
rt2x00: Fix unspeficied typo
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Paul Stewart [Thu, 23 Jun 2011 17:00:11 +0000 (09:00 -0800)]
mac80211: Drop DS Channel PARAM in directed probe
Do not send DS Channel parameter for directed probe requests
in order to maximize the chance that we get a response. Some
badly-behaved APs don't respond when this parameter is included.
Signed-off-by: Paul Stewart <pstew@chromium.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Sergei Shtylyov [Thu, 23 Jun 2011 14:49:52 +0000 (18:49 +0400)]
ssb: use pci_dev->revision
The bus scan code reads PCI revision ID from the PCI configuration register
while it's already stored by PCI subsystem in the 'revision' field of 'struct
pci_dev'...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mohammed Shafi Shajakhan [Thu, 23 Jun 2011 14:44:29 +0000 (20:14 +0530)]
ath9k_hw: make use of the gain_table_entry macro
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Mohammed Shafi Shajakhan [Thu, 23 Jun 2011 14:33:38 +0000 (20:03 +0530)]
ath9k_hw: Add carrier leak correction in desired gain calculation
Cc: muddin@qca.qualcomm.com
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Rajkumar Manoharan [Thu, 23 Jun 2011 08:09:13 +0000 (13:39 +0530)]
ath9k_hw: Fix false tx hung detection in AR9003 chips
The edma based (AR9003 family) chips update tx status
descriptors in a common ring buffer for all transmitted
frames. Whenever tx interrupt is raised, the descriptors
are processed and tx status index is moved.
The complete tx stauts ring are updated with beacons tx status
when there are no data frames to be sent for a period of time.
In this state, transmitting data frames causes the driver to
wait for the tx status on an incorrect tx status index though
the status was updated by hw properly. The driver detects this
condition as a h/w hang and does unnecessary chip resets.
This issue was orginally reported in adhoc mode while sending
frames after an idle time.
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Arik Nemtsov [Wed, 22 Jun 2011 22:15:27 +0000 (01:15 +0300)]
mac80211: reestablish mis-configured existing Rx BA sessions
When forming a Rx BA session, sometimes the ADDBA response gets lost.
This leads to a situation where the session is configured locally, but
doesn't exist on the remote side. Subsequent ADDBA requests are declined
by mac80211.
Fix this by assuming the session state of the initiator is the correct
one. When receiving an unexpected ADDBA request on a TID with an active
Rx BA session, delete the existing one and establish a new session.
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Randy Dunlap [Wed, 22 Jun 2011 17:08:11 +0000 (10:08 -0700)]
bluetooth: uses crypto interfaces, select CRYPTO
Recent changes to hci_core.c use crypto interfaces, so select CRYPTO
to make sure that those interfaces are present.
Fixes these build errors when CRYPTO is not enabled:
net/built-in.o: In function `hci_register_dev':
(.text+0x4cf86): undefined reference to `crypto_alloc_base'
net/built-in.o: In function `hci_unregister_dev':
(.text+0x4f912): undefined reference to `crypto_destroy_tfm'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Johannes Berg [Wed, 22 Jun 2011 14:43:48 +0000 (16:43 +0200)]
mac80211: restrict advertised HW scan rates
Advertise only user-requested bitrates in a HW scan.
Note that the hw_scan API doesn't currently have a
way of asking for a specific probe request bitrate,
so we might end up using a bitrate that we don't
advertise as supported. I'll fix that later.
Also add a hexdump printk to hwsim to verify this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
projects / openwrt / staging / blogic.git / log