John Crispin [Tue, 14 Oct 2014 19:01:30 +0000 (19:01 +0000)]
base-files: default_postinst() force clear luci-indexcache
Inside every LuCI package you need to clear luci-indexcache and
sometimes when installing non LuCI pacakges it's also needed to clear
it. Easier put it into default_postinst().
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
SVN-Revision: 42923
John Crispin [Tue, 14 Oct 2014 19:01:21 +0000 (19:01 +0000)]
wr1043nd-v2: Change .code of the wi-fi button to KEY_RFKILL
This patch changes the code of the Wi-Fi On/Off button on the TP-Link WR1043ND v2
from KEY_WLAN to KEY_RFKILL (and renames a few constants to match). The reason
for this change is, that the KEY_WIFI button code is not recognized by the
hotplug subsystem. This means that the userspace is not notified about the
button being pressed which effectively renders it useless.
Signed-off-by: Josef Gajdusek <atx@atx.name>
SVN-Revision: 42922
John Crispin [Tue, 14 Oct 2014 19:01:16 +0000 (19:01 +0000)]
package: add libnetfilter-log.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42921
John Crispin [Tue, 14 Oct 2014 19:01:10 +0000 (19:01 +0000)]
lantiq xway: generate ramdisk image by default
The installation process on nand-based boards using ubi
like the BTHOMEHUBV2B makes use of a ramdisk image, so it
makes sense to generate this by default.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 42920
John Crispin [Tue, 14 Oct 2014 19:01:05 +0000 (19:01 +0000)]
base-files: the USERID code path did not check for duplicate groups
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42919
John Crispin [Tue, 14 Oct 2014 15:53:05 +0000 (15:53 +0000)]
procd: update to latest git
this adds the remaining patches that Michel Stam sent
Signed-off-by: Michel Stam <m.stam@fugro.nl>
SVN-Revision: 42918
John Crispin [Tue, 14 Oct 2014 15:53:00 +0000 (15:53 +0000)]
libubox: update to latest git
this adds a new helper for setting/overriding the signal handlers
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42917
John Crispin [Tue, 14 Oct 2014 12:57:39 +0000 (12:57 +0000)]
uClibc: Backport uClibc master git commit
fd355bc1dbcb794ae1abf0fad1459e28d8567ba0 (eventfd.h: Use new "bits/" scheme for arch-specific flags)
This patch adds missing architecture-specific headers for use with
eventfd(2). Fixes #16679.
Signed-off-by: Luis Dallos <ld@nkvd.ignorelist.com>
SVN-Revision: 42916
John Crispin [Tue, 14 Oct 2014 12:21:41 +0000 (12:21 +0000)]
ar71xx: fix seama factory type image generation.
Currently JFFS2 end-of-filesystem marker 0xdeadc0de is included the
computation of image's MD5 checksum as part of the seama header. But
OpenWrt will erase blocks including and after the marker thus
invalidating the checksum after the first boot.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42915
John Crispin [Tue, 14 Oct 2014 12:21:36 +0000 (12:21 +0000)]
ar71xx: qihoo-c301: reset imageNtrynum after each successful boot.
Qihoo C301 has 2 flash chips of which one is used as primary and the
other is used as backup. OEM U-Boot will try to boot an activeregion N
with imageNstatus=0 and imageNtrynum <= imagemaxtry. If such a region
is found, bootloader will try to increment imageNtrynum and boot it.
This patch tries to reset imageNtrynum after each successful boot (if
the boot process reaches the execution of /etc/init.d/done).
root@OpenWrt:/# hexdump -C -n 128 /dev/mtdblock9
00000000 9e f3 63 91 61 63 74 69 76 65 72 65 67 69 6f 6e |..c.activeregion|
00000010 3d 31 00 69 6d 61 67 65 31 73 74 61 74 75 73 3d |=1.image1status=|
00000020 30 00 69 6d 61 67 65 32 73 74 61 74 75 73 3d 30 |0.image2status=0|
00000030 00 69 6d 61 67 65 32 74 72 79 6e 75 6d 3d 30 00 |.image2trynum=0.|
00000040 69 6d 61 67 65 6d 61 78 74 72 79 3d 33 00 69 6d |imagemaxtry=3.im|
00000050 61 67 65 31 74 72 79 6e 75 6d 3d 30 00 00 00 00 |age1trynum=0....|
00000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42914
John Crispin [Tue, 14 Oct 2014 12:21:24 +0000 (12:21 +0000)]
udev/Config.in: help format, and fix spelling mistake
Formatting and spelling fixes.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
SVN-Revision: 42913
John Crispin [Tue, 14 Oct 2014 12:21:16 +0000 (12:21 +0000)]
target/toolchain/Config.in: Clarify packaging of toolchain.
Change the "help" info to emphasize that this option refers
specifically to packaging the toolchain that would be built anyway.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
SVN-Revision: 42912
John Crispin [Tue, 14 Oct 2014 12:21:11 +0000 (12:21 +0000)]
scripts: fix wrong usage of '==' operator
[base-files] shell-scripting: fix wrong usage of '==' operator
normally the '==' is used for invoking a regex parser and is a bashism.
all of the fixes just want to compare a string. the used busybox-ash
will silently "ignore" this mistake, but make it portable/clean at least.
this patch does not change the behavior/logic of the scripts.
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 42911
John Crispin [Tue, 14 Oct 2014 11:32:57 +0000 (11:32 +0000)]
rb532: switch to 3.14 and ath5k
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 42910
John Crispin [Tue, 14 Oct 2014 11:32:48 +0000 (11:32 +0000)]
generic: fix yaffs compilation on 3.14
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 42909
John Crispin [Tue, 14 Oct 2014 11:32:43 +0000 (11:32 +0000)]
rb532: add 3.14 support
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 42908
John Crispin [Tue, 14 Oct 2014 11:04:25 +0000 (11:04 +0000)]
lantiq: allow pcie to be disabled by dts + vgv7519 fix pci irq + disable pcie by dts
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
SVN-Revision: 42907
John Crispin [Tue, 14 Oct 2014 10:33:07 +0000 (10:33 +0000)]
ar71xx: Fix LED definitions for the DRAGINO2 board
This patch fixes LED definitions for the DRAGINO2 board.
1. It renames the Router/USB led to System, as it is now marked "SYS" on the board.
2. It gives control of the LAN and WAN leds and some other GPIOs to Linux.
3. It fixes the active_low property for the LAN and WAN leds.
4. It sets up WLAN, LAN and WAN leds in the UCI defaults.
5. It allows usage of the System led by the diag.sh script, so it will be used to indicate boot and failsafe status.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 42897
John Crispin [Tue, 14 Oct 2014 10:30:56 +0000 (10:30 +0000)]
mpc85xx: use wpad-mini in WDR4900 profile instead of wpad
This change makes the profile of WDR4900 more consistent with other router
specific profiles.
Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>
SVN-Revision: 42896
Rafał Miłecki [Tue, 14 Oct 2014 08:06:15 +0000 (08:06 +0000)]
bcm53xx: fix hangs in PCIe2 host driver
Accessing CFG regs with no card present results in SoC hang.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42895
Rafał Miłecki [Tue, 14 Oct 2014 05:31:54 +0000 (05:31 +0000)]
bcm53xx: add temp bcma workaround that allows debugging
This way we will get logs if case of hang/crash in bcma or related code.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42894
John Crispin [Mon, 13 Oct 2014 19:45:31 +0000 (19:45 +0000)]
at91: fix at91-adc dependencies
Error reported by buildbot:
Package kmod-at91-adc is missing dependencies for the following libraries:
input-core.ko
only compile tested
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 42893
John Crispin [Mon, 13 Oct 2014 19:41:36 +0000 (19:41 +0000)]
ralink: Build 8M image for 7Links PX-4885
7Links PX-4885 (clones) can also be purchased with 8MB flash.
Creating images for these routers, use dtsi for common part
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 42892
John Crispin [Mon, 13 Oct 2014 19:41:27 +0000 (19:41 +0000)]
scripts/feeds: handle missing/broken feeds better
pts/feeds update -a" can fail rather silently for feeds using git, as
the script does not pause when updating a feed fails. Instead it prints the
error message and calmly continues to the next feed. It is very easy to
overlook update errors with the feeds updated first, as their text scrolls
rapidly away from the screen.
This behaviour has not been a big problem with svn feeds, as svn update stops
with a conflict message and interactively forces the user to resolve or
postpone the conflict. In any case the svn error is noticed by the user.
Majority of the feeds use now git, so this silent failure can affect users
doing private builds in an increasing amount.
Below is an example of update failing and script continuing:
perus@v1404:/Openwrt/barrier$ ./scripts/feeds update -a
Updating feed 'packages' from
'https://github.com/openwrt/packages.git;for-14.07' ...
remote: Counting objects: 17, done.
remote: Compressing objects: 100% (15/15), done.
remote: Total 17 (delta 10), reused 8 (delta 1)
Unpacking objects: 100% (17/17), done.
From https://github.com/openwrt/packages
62031da..
dc26009 for-14.07 -> origin/for-14.07
Updating
62031da..
dc26009
error: Your local changes to the following files would be overwritten by merge:
utils/collectd/Makefile
Please, commit your changes or stash them before you can merge.
Aborting
failed.
Updating feed 'luci' from 'http://git.openwrt.org/project/luci.git;luci-0.12' ...
Already up-to-date.
Create index file './feeds/luci.index'
Updating feed 'routing' from
'https://github.com/openwrt-routing/packages.git;for-14.07' ...
...
The script prints "failed.", but does not break the updating process. The
"update_feed" function returns an error code 1, but that value is not checked
in the "update" function, which continues to the next feed.
Return 1 as error:
https://dev.openwrt.org/browser/trunk/scripts/feeds#L547
Call to update_feed without any error monitoring:
https://dev.openwrt.org/browser/trunk/scripts/feeds#L585
The included patch makes the feeds script to stop updating after failing to
update a feed.
The script continues to the refresh_config step despite a possible failure in
updating, so the stopping action just prevents the other feeds from updating
and makes the error more clearly visible.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 42891
John Crispin [Mon, 13 Oct 2014 19:41:16 +0000 (19:41 +0000)]
fstools: update to latest git HEAD
this adds support for overlayfs v23
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42890
Rafał Miłecki [Mon, 13 Oct 2014 05:53:33 +0000 (05:53 +0000)]
brcm47xx: image: create initramfs TRX nodictionary images
Signed-off-by: Stephen Parry <sgparry@mainscreen.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42889
Felix Fietkau [Sun, 12 Oct 2014 20:25:30 +0000 (20:25 +0000)]
x86: remove old soekris config hacks, install a more appropriate default /etc/config/network with lan+wan
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42888
Felix Fietkau [Sun, 12 Oct 2014 15:50:15 +0000 (15:50 +0000)]
procd: fix initial nand sysupgrade
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42884
Felix Fietkau [Sun, 12 Oct 2014 15:50:01 +0000 (15:50 +0000)]
procd: fix parsing of the has_env parameter
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42883
Felix Fietkau [Sun, 12 Oct 2014 15:49:38 +0000 (15:49 +0000)]
mac80211: remove NO-IR from channel 36-48
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42882
Felix Fietkau [Sun, 12 Oct 2014 15:01:08 +0000 (15:01 +0000)]
image.mk: remove legacy target rules
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42881
Felix Fietkau [Sun, 12 Oct 2014 15:01:01 +0000 (15:01 +0000)]
image.mk: parallelize cpio.gz and tar.gz filesystem build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42880
Felix Fietkau [Sun, 12 Oct 2014 15:00:55 +0000 (15:00 +0000)]
image.mk: split off jffs2-raw images into a separate make target to improve parallel build time
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42879
Felix Fietkau [Sun, 12 Oct 2014 15:00:49 +0000 (15:00 +0000)]
image.mk: clean up and parallelize mkfs calls
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42878
Felix Fietkau [Sun, 12 Oct 2014 15:00:41 +0000 (15:00 +0000)]
prereq.mk: only define .NOTPARALLEL when processing prereq checks
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42877
Felix Fietkau [Sun, 12 Oct 2014 15:00:19 +0000 (15:00 +0000)]
kernel-build.mk: add .NOTPARALLEL
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42876
Felix Fietkau [Sun, 12 Oct 2014 15:00:15 +0000 (15:00 +0000)]
tools/mtd-utils: fix a segfault in parsing the device table
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42875
Felix Fietkau [Sun, 12 Oct 2014 15:00:11 +0000 (15:00 +0000)]
image.mk: call mkfs/prepare for the image builder
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42874
Felix Fietkau [Sun, 12 Oct 2014 15:00:07 +0000 (15:00 +0000)]
image.mk: reduce code duplication, move prepare to a separate make target
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42873
Felix Fietkau [Sun, 12 Oct 2014 15:00:03 +0000 (15:00 +0000)]
image.mk: remove the unnecessary .NOTPARALLEL flag
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42872
Steven Barth [Sun, 12 Oct 2014 12:27:21 +0000 (12:27 +0000)]
netifd: Make mtu configurable of dynamic 6rd tunnel interface
Patch allows to configure the mtu of the dynamic 6rd tunnel interface when created by dhcp script.
In some setups it's desirable to have config control over the 6rd tunnel mtu to maximize the traffic throughput
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 42871
Steven Barth [Sun, 12 Oct 2014 12:18:33 +0000 (12:18 +0000)]
odhcp6c: fix parse errors with some dhcpv6 servers
SVN-Revision: 42869
John Crispin [Fri, 10 Oct 2014 08:56:53 +0000 (08:56 +0000)]
ralink: various i2c related fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42868
John Crispin [Fri, 10 Oct 2014 08:56:43 +0000 (08:56 +0000)]
ramips: add support for Nexx WT1520
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 42867
John Crispin [Fri, 10 Oct 2014 08:56:33 +0000 (08:56 +0000)]
comgt: add ncm proto support
This will not work for all board/dongle combinations until we hit 3.17.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 42866
Jo-Philipp Wich [Thu, 9 Oct 2014 21:27:26 +0000 (21:27 +0000)]
feeds: switch LuCI to Github repo
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42865
Rafał Miłecki [Thu, 9 Oct 2014 16:36:51 +0000 (16:36 +0000)]
bcm53xx: prepare to support Asus RT-N18U
DT file doesn't include any GPIOs yet, but let's add it as we got some
interest in this device on IRC.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42864
Rafał Miłecki [Thu, 9 Oct 2014 16:36:05 +0000 (16:36 +0000)]
bcm53xx: add support for Buffalo WZR-1750DHP
Let's generate a simple TRX file as we can't get encrypted one.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42863
Felix Fietkau [Thu, 9 Oct 2014 09:04:24 +0000 (09:04 +0000)]
mac80211: remove error from detect script
Signed-off-by: Michel Stam <m.stam@fugro.nl>
SVN-Revision: 42861
Steven Barth [Thu, 9 Oct 2014 07:38:25 +0000 (07:38 +0000)]
ppp: add unconditional autoipv6-trigger
SVN-Revision: 42860
Steven Barth [Thu, 9 Oct 2014 07:35:28 +0000 (07:35 +0000)]
ppp: remove ugly ipv6-workaround
This is not needed after all:
Omitting option ipv6 or setting it to 'auto' will
fire up a dhcpv6 subprotocol (this was added).
Setting ipv6 to 1 will only cause the IPv6 link to
be brought up and an accompanying dhcpv6 or static
interface with ifname @wan can be used to configure addresses.
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42859
Steven Barth [Thu, 9 Oct 2014 07:18:07 +0000 (07:18 +0000)]
kernel: add missing symbols for 3.14
spotted by buildbot brcm2708:
http://buildbot.openwrt.org:8010/builders/brcm2708/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 42858
Steven Barth [Thu, 9 Oct 2014 07:16:35 +0000 (07:16 +0000)]
dropbear: ensure the interface has an ip-address
Use network_get_ipaddrs_all to get all ip-addresses of an interface. If the
function fails, the interface does not exists or has not any suiteable ip
addresses assigned.
Use the returned ip-address(es) to construct the dropbear listen address.
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
SVN-Revision: 42857
Steven Barth [Thu, 9 Oct 2014 07:16:29 +0000 (07:16 +0000)]
base-files: add network_get_ipaddrs_all()
Return all IPv4 and IPv6 addresses.
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
SVN-Revision: 42856
Steven Barth [Thu, 9 Oct 2014 07:16:22 +0000 (07:16 +0000)]
autoconf: bump version to 2.69
Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 42855
Steven Barth [Wed, 8 Oct 2014 20:37:15 +0000 (20:37 +0000)]
ppp: allow auto-detecting and creation of ipv6 subinterface
this makes ipv6 with ppp a bit more comfortable
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42854
Steven Barth [Wed, 8 Oct 2014 15:27:17 +0000 (15:27 +0000)]
odhcp6c: fix typo in last commit
SVN-Revision: 42852
Steven Barth [Wed, 8 Oct 2014 15:16:19 +0000 (15:16 +0000)]
odhcp6c: don't assign addresses or prefixes prematurely
SVN-Revision: 42850
Felix Fietkau [Wed, 8 Oct 2014 15:09:53 +0000 (15:09 +0000)]
mac80211: add a few upstream ath9k / mac80211 fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42849
Steven Barth [Wed, 8 Oct 2014 13:08:05 +0000 (13:08 +0000)]
network: Unbind DHCPv6 from underlying interfaces
This allows IPv6 to set up without IPv4 being up thus
IPv6-only or IPv6+DS-Lite working with the default config.
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42848
Felix Fietkau [Wed, 8 Oct 2014 10:28:10 +0000 (10:28 +0000)]
cns3xxx: Adopt irq_domain support for cns3xxx gpio driver
Have gpio driver adopt irqdomain support so that there are
non-overlapping allocations of irq numbers mapped to gpio's.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 42844
Steven Barth [Wed, 8 Oct 2014 09:58:40 +0000 (09:58 +0000)]
odhcp6c: ensure signal-safety of signal handlers
SVN-Revision: 42841
John Crispin [Wed, 8 Oct 2014 08:01:39 +0000 (08:01 +0000)]
include/download.mk: Add download mirrors for tools from GNU Savannah (bug #15184)
I defined a new download method @SAVANNAH in include/download.mk and scripts/download.pl,
and converted quilt and qemu to use that method.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 42840
John Crispin [Wed, 8 Oct 2014 08:01:33 +0000 (08:01 +0000)]
lldp: make use of new USERID syntax
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42839
John Crispin [Wed, 8 Oct 2014 08:01:28 +0000 (08:01 +0000)]
base-files: extend USERID:=syntax
it is now possible to inlie the uid and gid in the syntax
USERID:=username=uid:group=gid:group2=gid2:...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42838
John Crispin [Wed, 8 Oct 2014 08:01:20 +0000 (08:01 +0000)]
wwan: add a generic 3g/4g proto
this proto handler will detect which of 3g, qmi, mbim, ncm or directip you need
for a stick and setup uci automagically
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42837
John Crispin [Wed, 8 Oct 2014 08:00:55 +0000 (08:00 +0000)]
comgt: split directip support into its own package
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42836
John Crispin [Wed, 8 Oct 2014 08:00:45 +0000 (08:00 +0000)]
uqmi: dont use proto_block_restart
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42835
John Crispin [Wed, 8 Oct 2014 08:00:21 +0000 (08:00 +0000)]
uqmi: make the proto depend on the usb driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42834
John Crispin [Wed, 8 Oct 2014 08:00:17 +0000 (08:00 +0000)]
umbim: dont use proto_block_restart
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42833
John Crispin [Wed, 8 Oct 2014 08:00:07 +0000 (08:00 +0000)]
umbim: work out the ifname instead of relying on it being in uci
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42832
John Crispin [Wed, 8 Oct 2014 08:00:01 +0000 (08:00 +0000)]
procd: handle hotplug events for the usbmisc subsystem
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42831
Felix Fietkau [Tue, 7 Oct 2014 10:37:48 +0000 (10:37 +0000)]
cns3xxx: fix shared PCI interrupt mapping
This patch originally failed to combine INTA/B/C/D onto a single ARM CPU
interrupt. Instead, it mapped INTA/B/C and excluded D. This patch
corrects the issue by mapping all four interrupts to the single ARM CPU
interrupt. The original intent of the patch still holds as the newer PCB
take advantage of isolated interrupts. This fix only applies to older
PCB's that do not route INTA/B/C/D to unique external ARM CPU
interrupts.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 42830
Felix Fietkau [Tue, 7 Oct 2014 10:37:09 +0000 (10:37 +0000)]
cns3xxx: fix register for enabling MMC/SD pins
also fixes a GPIO related regression from the upgrade to 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42829
Rafał Miłecki [Tue, 7 Oct 2014 07:35:17 +0000 (07:35 +0000)]
kernel: move old "rootfs" splitter into separated file
This will simplify removing it in the future.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42828
Rafał Miłecki [Mon, 6 Oct 2014 21:33:17 +0000 (21:33 +0000)]
bcm53xx: add Netgear R6300 V2 LEDs and buttons
Thanks tusc (our forum user) for checking GPIOs.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42827
John Crispin [Mon, 6 Oct 2014 20:27:31 +0000 (20:27 +0000)]
procd: r42814 added a bad git version
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42826
John Crispin [Mon, 6 Oct 2014 20:08:40 +0000 (20:08 +0000)]
at91: remove support for TQMa9263
This board is EOL, we should not bother anymore with it.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 42825
John Crispin [Mon, 6 Oct 2014 20:08:30 +0000 (20:08 +0000)]
lantiq - vgv7519: load rt5362 eeprom from bootloader param patition
SVN-Revision: 42824
John Crispin [Mon, 6 Oct 2014 20:08:18 +0000 (20:08 +0000)]
lantiq - vgv7519: enable pci bus
SVN-Revision: 42823
John Crispin [Mon, 6 Oct 2014 20:08:11 +0000 (20:08 +0000)]
lantiq - vgv7519: remove spi_cs4, since the board use this line for something else
SVN-Revision: 42822
John Crispin [Mon, 6 Oct 2014 20:08:04 +0000 (20:08 +0000)]
lantiq - vgv7519: fix open-drain configuration for stp
SVN-Revision: 42821
John Crispin [Mon, 6 Oct 2014 20:07:56 +0000 (20:07 +0000)]
lantiq - vgv7519: add pci-rst entry into dts
SVN-Revision: 42820
John Crispin [Mon, 6 Oct 2014 20:07:45 +0000 (20:07 +0000)]
lantiq - vgv7519: remove exin definition copied from dev-board dts
SVN-Revision: 42819
John Crispin [Mon, 6 Oct 2014 20:07:30 +0000 (20:07 +0000)]
lantiq - vgv7519: we don't have pcie bus so we don't need the reset device tree for this board
SVN-Revision: 42818
John Crispin [Mon, 6 Oct 2014 20:07:19 +0000 (20:07 +0000)]
lantiq - vgv7519: we don't have dual minipci-card so we don't need gnt1-req1 for pci handling
SVN-Revision: 42817
John Crispin [Mon, 6 Oct 2014 20:07:04 +0000 (20:07 +0000)]
lantiq - vgv7519: fix gphy led configuration (this set correct alt function to gpio and let peripherials on pci bus to comes up)
SVN-Revision: 42816
John Crispin [Mon, 6 Oct 2014 20:06:51 +0000 (20:06 +0000)]
lantiq: fix some alt function on pinctrl-xway
SVN-Revision: 42815
John Crispin [Mon, 6 Oct 2014 20:06:41 +0000 (20:06 +0000)]
procd: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42814
John Crispin [Mon, 6 Oct 2014 20:06:26 +0000 (20:06 +0000)]
ubox: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42813
John Crispin [Mon, 6 Oct 2014 20:06:15 +0000 (20:06 +0000)]
fstools: update to latest git
adds support for /dev/vd* virtual io
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42812
John Crispin [Mon, 6 Oct 2014 20:06:06 +0000 (20:06 +0000)]
octeon: add patches which are not upstreamed yet
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 42811
John Crispin [Mon, 6 Oct 2014 20:05:52 +0000 (20:05 +0000)]
octeon: remove kmod-ath9k from default packages
Looks like the targets are Ubiquiti routers which don't come with any wireless cards.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 42810
John Crispin [Mon, 6 Oct 2014 20:05:39 +0000 (20:05 +0000)]
octeon: prepare elf kernel image and md5sum for usb copying
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 42809
John Crispin [Mon, 6 Oct 2014 20:05:29 +0000 (20:05 +0000)]
octeon: fix serial console for 3.14 kernel
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 42808
John Crispin [Mon, 6 Oct 2014 20:05:13 +0000 (20:05 +0000)]
ralink: various i2c fixes
the driver did not handle all states correctly causing a deadlock of the i2c hw block.
Signed-off-by: Ing.Michele Mogioni <michele.mogioni@unimc.it>
SVN-Revision: 42807
Rafał Miłecki [Mon, 6 Oct 2014 15:07:54 +0000 (15:07 +0000)]
kernel: add some warnings to the old (built-in) rootfs splitter
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42806
Rafał Miłecki [Mon, 6 Oct 2014 14:02:06 +0000 (14:02 +0000)]
kernel: enable CONFIG_MTD_SPLIT_SQUASHFS_ROOT
This enables dedicated "rootfs" splitter by default. We still keep
CONFIG_MTD_SPLIT_SQUASHFS_ROOT, so the old (built-in) splitter will be
used as a fallback in case of problems.
Once we decide the dedicated partitioner works stable, we should remove
the old one completely.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42805
Rafał Miłecki [Mon, 6 Oct 2014 13:49:11 +0000 (13:49 +0000)]
kernel: allow rootfs splitters to work without CONFIG_MTD_ROOTFS_SPLIT
We want to remove that old (built-in) splitter at some point.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42804
Steven Barth [Mon, 6 Oct 2014 11:19:33 +0000 (11:19 +0000)]
odhcp6c: add route-workaround for broken IPv6-ISPs
Some ISP seem to only do stateful DHCPv6 and not sending RAs.
This is technically broken because plain DHCPv6 doesn't carry routes.
We work around here by faking a default route to the DHCPv6 server
if we do not receive a useful RA from the ISP.
This workaround can be turned off with: option fakeroutes 0
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 42803
projects / openwrt / staging / chunkeey.git / log