Kumar Gala [Fri, 15 Feb 2008 02:44:42 +0000 (20:44 -0600)]
Add setexpr command
Add a simple expr style command that will set an env variable as the result
of the command. This allows us to do simple math in shell. The following
operations are supported: &, |, ^, +, -, *, /.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Yuri Tikhonov [Mon, 24 Mar 2008 10:30:54 +0000 (11:30 +0100)]
lwmon5 SYSMON POST: fix backlight control
If the LWMON5 config has SYSMON POST among CONFIG_POSTs which may be
run on the board, then the SYSMON POST controls the display backlight
(doesn't switch backlight ON if POST FAILED, and does switch the
backlight ON if PASSED).
If not, then the video driver controls the display backlight (just
switch ON the backlight upon initialization).
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Yuri Tikhonov [Mon, 24 Mar 2008 10:29:14 +0000 (11:29 +0100)]
lwmon5 SYSMON POST: fix handling of negative temperatures
Fix errors in the LWMON5 Sysmon POST for negative temperatures.
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Wolfgang Denk [Mon, 24 Mar 2008 23:12:54 +0000 (00:12 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/master/
Nobuhiro Iwamatsu [Fri, 7 Mar 2008 07:04:25 +0000 (16:04 +0900)]
pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option
In current source code, when the device number of PCI is 0, process PCI
bridge without fail. However, when the device number is 0, it is not PCI
always bridge. There are times when device of PCI allocates.
When CONFIG_PCI_SKIP_HOST_BRIDGE is enable, this problem is solved when
use this patch.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Sat, 22 Mar 2008 23:57:40 +0000 (00:57 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-tq-group
Wolfgang Denk [Sat, 22 Mar 2008 23:53:43 +0000 (00:53 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-cfi-flash
Wolfgang Denk [Sat, 22 Mar 2008 23:52:58 +0000 (00:52 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-fdt
Wolfgang Denk [Sat, 22 Mar 2008 22:27:43 +0000 (23:27 +0100)]
Merge branch 'master' of /home/wd/git/u-boot/work
Yuri Tikhonov [Fri, 21 Mar 2008 08:18:40 +0000 (09:18 +0100)]
LWMON5: fix dsPIC POST
Add test for DPIC_SYS_ERROR_REG to be zero in the LWMON5 dsPIC POST.
Signed-off-by: Yuri Tikhonov <yur@emcraft.com> ---
Gerald Van Baren [Fri, 21 Mar 2008 15:58:22 +0000 (11:58 -0400)]
Merge git://www.denx.de/git/u-boot into uboot
Wolfgang Denk [Thu, 20 Mar 2008 21:01:38 +0000 (22:01 +0100)]
lwmon5 POST: remove unreachable code
plus some coding style cleanup
Signed-off-by: Wolfgang Denk <wd@denx.de>
Yuri Tikhonov [Thu, 20 Mar 2008 14:56:04 +0000 (17:56 +0300)]
LWMON5: POST RTC fix
Modify the RTC API to provide one a status for the time reported by
the rtc_get() function:
0 - a reliable time is guaranteed,
< 0 - a reliable time isn't guaranteed (power fault, clock issues,
and so on).
The RTC chip drivers are responsible for providing this info if the
corresponding chip supports such functionality. If not - always
report that the time is reliable.
The POST RTC test was modified to detect the RTC faults utilizing
this new rtc_get() feature.
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Martin Krause [Wed, 19 Mar 2008 13:25:14 +0000 (14:25 +0100)]
TQM5200B: update MTD partition layout
- insert partition for dtb blob to TQM5200B MTD layout
- set env variables dependent on the configured board
(TQM5200 or TQM5200B)
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Stefan Roese [Wed, 19 Mar 2008 06:09:26 +0000 (07:09 +0100)]
CFI: Small cleanup for FLASH_SHOW_PROGRESS
With this patch we don't need that many #ifdef's in the code. It moves
the subtraction into the macro and defines a NOP-macro when
CONFIG_FLASH_SHOW_PROGRESS is not defined.
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
Jerry Van Baren [Sat, 8 Mar 2008 18:48:01 +0000 (13:48 -0500)]
Flash programming progress countdown.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
David Gibson [Mon, 18 Feb 2008 07:09:04 +0000 (18:09 +1100)]
libfdt: Remove no longer used code from fdt_node_offset_by_compatible()
Since fdt_node_offset_by_compatible() was converted to the new
fdt_next_node() iterator, a chunk of initialization code became
redundant, but was not removed by oversight. This patch cleans it up.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Mon, 18 Feb 2008 07:06:31 +0000 (18:06 +1100)]
libfdt: Trivial cleanup for CHECK_HEADER)
Currently the CHECK_HEADER() macro is defined local to fdt_ro.c.
However, there are a handful of functions (fdt_move, rw_check_header,
fdt_open_into) from other files which could also use it (currently
they open-code something more-or-less identical). Therefore, this
patch moves CHECK_HEADER() to libfdt_internal.h and uses it in those
places.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Kumar Gala [Wed, 20 Feb 2008 20:32:36 +0000 (14:32 -0600)]
Fix fdt boardsetup command parsing
The introduciton of the 'fdt bootcpu' broke parsing for 'fdt boardsetup'.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Fri, 15 Feb 2008 09:34:36 +0000 (03:34 -0600)]
Add sub-commands to fdt
fdt header - Display header info
fdt bootcpu <id> - Set boot cpuid
fdt memory <addr> <size> - Add/Update memory node
fdt rsvmem print - Show current mem reserves
fdt rsvmem add <addr> <size> - Add a mem reserve
fdt rsvmem delete <index> - Delete a mem reserves
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
David Gibson [Thu, 14 Feb 2008 05:50:34 +0000 (16:50 +1100)]
libfdt: Fix NOP handling bug in fdt_add_subnode_namelen()
fdt_add_subnode_namelen() has a bug if asked to add a subnode to a
node which has NOP tags interspersed with its properties. In this
case fdt_add_subnode_namelen() will put the new subnode before the
first NOP tag, even if there are properties after it, which will
result in an invalid blob.
This patch fixes the bug, and adds a testcase for it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Tue, 12 Feb 2008 00:58:31 +0000 (11:58 +1100)]
libfdt: Add and use a node iteration helper function.
This patch adds an fdt_next_node() function which can be used to
iterate through nodes of the tree while keeping track of depth. This
function is used to simplify the iteration code in a lot of other
functions, and is also exported for use by library users.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Fri, 11 Jan 2008 03:55:05 +0000 (14:55 +1100)]
libfdt: Add fdt_set_name() function
This patch adds an fdt_set_name() function to libfdt, mirroring
fdt_get_name(). This is a r/w function which alters the name of a
given device tree node.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Yuri Tikhonov [Tue, 18 Mar 2008 12:33:30 +0000 (13:33 +0100)]
lwmon5: Fix register test logic to match the specific GDC h/w.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Yuri Tikhonov [Tue, 18 Mar 2008 12:27:57 +0000 (13:27 +0100)]
Fix backlight in the lwmon5 POST.
Backlight was switched on even when temperature was too low.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Yuri Tikhonov [Wed, 6 Feb 2008 17:48:36 +0000 (18:48 +0100)]
The patch introduces the alternative configuration of the log buffer for the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., PPC440EPX_GPT0_COMP5).
To enable this, alternative, configuration the U-Boot board configuration
file for lwmon5 includes the definitions of alternative addresses for header
(CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR).
The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set,
and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the
lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h).
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Yuri Tikhonov [Mon, 4 Feb 2008 16:11:53 +0000 (17:11 +0100)]
Add support for the lwmon5 board reset via GPIO58.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Yuri Tikhonov [Mon, 4 Feb 2008 16:09:55 +0000 (17:09 +0100)]
Some fixes to dspic, fpga, and gdc post tests for lwmon5. Disable external watch-dog for now.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Yuri Tikhonov [Mon, 4 Feb 2008 13:11:03 +0000 (14:11 +0100)]
The patch introduces the CRITICAL feature of POST tests. If the test marked as POST_CRITICAL fails then the alternative, post_critical, boot-command is used. If this command is not defined then U-Boot enters into interactive mode.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Yuri Tikhonov [Mon, 4 Feb 2008 13:10:42 +0000 (14:10 +0100)]
The patch adds new POST tests for the Lwmon5 board. These are:
* External Watchdog test;
* dsPIC tests;
* FPGA test;
* GDC test;
* Sysmon tests.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Yuri Tikhonov [Mon, 4 Feb 2008 13:10:01 +0000 (14:10 +0100)]
Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP.
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Wolfgang Denk [Tue, 18 Mar 2008 21:15:58 +0000 (22:15 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-blackfin
Wolfgang Denk [Tue, 18 Mar 2008 16:35:51 +0000 (17:35 +0100)]
HMI1001: fix compile problem.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Mike Frysinger [Mon, 18 Feb 2008 10:32:30 +0000 (05:32 -0500)]
Blackfin: BF537-stamp: drop board-specific flash driver for CFI
The parallel flash on the BF537-STAMP is CFI compliant, so there is no need
for the board specific driver at all. Just use the common CFI driver.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 19 Feb 2008 05:36:14 +0000 (00:36 -0500)]
Blackfin: add proper ELF markings to some assembly functions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 19 Feb 2008 05:35:17 +0000 (00:35 -0500)]
Blackfin: new cplbinfo command for viewing cplb tables
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 18 Feb 2008 10:37:51 +0000 (05:37 -0500)]
Blackfin: update MAINTAINERS list
Add maintainer information for the Blackfin boards.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 18 Feb 2008 10:26:48 +0000 (05:26 -0500)]
Blackfin: convert BFIN_CPU to CONFIG_BFIN_CPU
Stop tying things to the processor that should be tied to other defines and
change BFIN_CPU to CONFIG_BFIN_CPU so that it can be used in the build
system to select the -mcpu option.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sat, 16 Feb 2008 12:40:36 +0000 (07:40 -0500)]
Blackfin: move bootldr command to common code
This moves the Blackfin-common bootldr command out of the BF537-STAMP
specific board directory and into the common directory so that all Blackfin
boards may utilize it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Sun, 16 Mar 2008 00:50:18 +0000 (01:50 +0100)]
Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master
Conflicts:
drivers/rtc/Makefile
Signed-off-by: Wolfgang Denk <wd@denx.de>
Heiko Schocher [Fri, 14 Mar 2008 10:05:20 +0000 (11:05 +0100)]
mgcoge: update configuration
Fix configuration for mgcoge board
Signed-off-by: Heiko Schocher <hs@denx.de>
Wolfgang Denk [Sun, 16 Mar 2008 00:22:59 +0000 (01:22 +0100)]
drivers/rtc/Makefile: keep list sorted
Signed-off-by: Wolfgang Denk <wd@denx.de>
Tor Krill [Sat, 15 Mar 2008 14:40:26 +0000 (15:40 +0100)]
Add support for Intersil isl1208 RTC
Signed-off-by: Tor Krill <tor@excito.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 15 Mar 2008 16:36:41 +0000 (17:36 +0100)]
cramfs: Fix ifdef
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Sun, 16 Mar 2008 00:12:58 +0000 (01:12 +0100)]
Conding style cleanup
Signed-off-by: Wolfgang Denk <wd@denx.de>
Stefan Roese [Wed, 5 Mar 2008 11:31:53 +0000 (12:31 +0100)]
ppc4xx: Add USB OHCI support to AMCC Canyonlands 460EX eval board
This patch adds USB OHCI support to the Canyonlands board port. It also
enables EXT2 support.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Wed, 5 Mar 2008 11:29:32 +0000 (12:29 +0100)]
usb: Add CFG_OHCI_USE_NPS to common USB-OHCI driver
This patch adds CFG_OHCI_USE_NPS to the common USB-OHCI driver. This
way a board just needs to define this new option to enable the "force
NoPowerSwitching mode" instead of adding new CPU/architecture defines
to the USB source itself.
This new option will be used first with the new AMCC 460EX Canyonlands
board port, which will be posted in a few days.
This patch also fixes a small compilation problem when DEBUG is enabled.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Mon, 3 Mar 2008 16:27:02 +0000 (17:27 +0100)]
ppc4xx: Add Canyonlands NAND booting support
460EX doesn't support a fixed bootstrap option to boot from 512 byte page
NAND devices. The only bootstrap option for NAND booting is option F for
2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
EEPROM needs to be programmed accordingly.
This patch adds basic NAND booting support for the AMCC Canyonlands aval
board and also adds support to the "bootstrap" command, to enable NAND
booting I2C setting.
Tested with 512 byte page NAND device (32MByte) on Canyonlands.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 11 Mar 2008 15:53:00 +0000 (16:53 +0100)]
ppc4xx: Add AMCC Canyonlands support (460EX) (3/3)
This patch adds support for the AMCC Canyonlands 460EX evaluation
board.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 11 Mar 2008 15:52:24 +0000 (16:52 +0100)]
ppc4xx: Add AMCC Canyonlands support (460EX) (2/3)
This patch adds support for the AMCC Canyonlands 460EX evaluation
board.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 11 Mar 2008 15:51:17 +0000 (16:51 +0100)]
ppc4xx: Add AMCC Canyonlands support (460EX) (1/3)
This patch adds support for the AMCC Canyonlands 460EX evaluation
board.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 11 Mar 2008 14:11:43 +0000 (15:11 +0100)]
ppc4xx: Add basic support for AMCC 460EX/460GT (5/5)
This patch adds basic support for the AMCC 460EX/460GT PPC's.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 11 Mar 2008 14:11:18 +0000 (15:11 +0100)]
ppc4xx: Add basic support for AMCC 460EX/460GT (4/5)
This patch adds basic support for the AMCC 460EX/460GT PPC's.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 11 Mar 2008 14:07:10 +0000 (15:07 +0100)]
ppc4xx: Add basic support for AMCC 460EX/460GT (3/5)
This patch adds basic support for the AMCC 460EX/460GT PPC's.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 11 Mar 2008 14:05:50 +0000 (15:05 +0100)]
ppc4xx: Add basic support for AMCC 460EX/460GT (2/5)
This patch adds basic support for the AMCC 460EX/460GT PPC's.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 11 Mar 2008 14:05:26 +0000 (15:05 +0100)]
ppc4xx: Add basic support for AMCC 460EX/460GT (1/5)
This patch adds basic support for the AMCC 460EX/460GT PPC's.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 19 Feb 2008 21:07:57 +0000 (22:07 +0100)]
ppc4xx: interrupt.c reworked
This patch is a rework of the 4xx interrupt handling done while
adding the 460EX/GT support. Interrupts are needed on 4xx for the
EMAC driver.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 19 Feb 2008 21:01:57 +0000 (22:01 +0100)]
ppc4xx: program_tlb now uses 64bit physical addess
This patch changes the physical addess parameter from 32bit to 64bit.
This is needed for 36bit 4xx platforms to access areas located
beyond the 4GB border, like SoC peripherals (EBC etc.).
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 19 Feb 2008 20:58:25 +0000 (21:58 +0100)]
ppc4xx: miiphy.c reworked
While adding the 460EX/GT support I reworked the 4xx miiphy code. It
badly neede some cleanup.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 19 Feb 2008 15:21:49 +0000 (16:21 +0100)]
rtc: Add M41T62 support
This patch add support for the STM M41T62 RTC. It is used and tested
on the AMCC Canyonlands 406EX platform.
Signed-off-by: Stefan Roese <sr@denx.de>
Niklaus Giger [Mon, 25 Feb 2008 17:46:43 +0000 (18:46 +0100)]
ppc4xx: Add 405GPr based MCU25 board specific files
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Niklaus Giger [Mon, 25 Feb 2008 17:46:42 +0000 (18:46 +0100)]
ppc4xx: Add 405GPr based MCU25 board config file
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Niklaus Giger [Mon, 25 Feb 2008 17:46:41 +0000 (18:46 +0100)]
ppc4xx: Add 405GPr based MCU25 board. Global files
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Niklaus Giger [Mon, 25 Feb 2008 17:37:02 +0000 (18:37 +0100)]
ppc4xx: HCU4/5. remove obsolete hcu_flash.c
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Niklaus Giger [Mon, 25 Feb 2008 17:37:01 +0000 (18:37 +0100)]
ppc4xx: HCU4/5. Use FLASH_CFI_LEGACY
Cleanup: Remove custom flash driver for 8 bit boot-eprom and replace it with
the FLASH_CFI_LEGACY et al. config options.
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Stefan Roese [Tue, 11 Mar 2008 12:52:25 +0000 (13:52 +0100)]
ppc4xx: Fix comment in 405EX DDR2 init code
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Fri, 14 Mar 2008 15:04:54 +0000 (16:04 +0100)]
tools/setlocalversion: use a git-describe-ish format
Change the automatic local version to have the form -nnnnn-gSHA1SUMID,
where 'nnnnn' is the number of commits since the last tag (i.e.,
1.3.2-rc3). This makes it much easier to recognize "newer" versions
and to see how much has been changed since the referenced tag.
Stolen from Linux kernel's scripts/setlocalversio, see commit
d882421f.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 13 Mar 2008 13:32:03 +0000 (14:32 +0100)]
HMI1001: add support for MPC5200 Rev. B processors.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 13 Mar 2008 13:29:49 +0000 (14:29 +0100)]
TQM5200: remove dead code
This board never used a MGT5100 processor.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 9 Mar 2008 15:20:02 +0000 (16:20 +0100)]
Release v1.3.2
Update CHANGELOG for release.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 9 Mar 2008 13:52:11 +0000 (14:52 +0100)]
SCM: fix 'packed' attribute ignored for field of type 'can_msg_t' warnings
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Jean-Christophe PLAGNIOL-VILLARD [Sun, 9 Mar 2008 09:44:01 +0000 (10:44 +0100)]
scb9328: Fix flash warning: type qualifiers ignored on function return type
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Wolfgang Denk [Sun, 9 Mar 2008 09:50:41 +0000 (10:50 +0100)]
esd/common/fpga.c: fix indentation.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 9 Mar 2008 09:33:31 +0000 (10:33 +0100)]
common/kgdb.c: fix 'dereferencing type-punned pointer' warning
and get rid of a couple of unneeded casts.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 9 Mar 2008 09:09:53 +0000 (10:09 +0100)]
esd/common/fpga.c: fix 'assignment of read-only location' error
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 9 Mar 2008 01:13:19 +0000 (02:13 +0100)]
Makefile: make build silently again.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 9 Mar 2008 01:07:49 +0000 (02:07 +0100)]
m501sk: Fix out of tree building
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 8 Mar 2008 23:06:09 +0000 (00:06 +0100)]
ADS5121: fix out of tree build
and simplify Makefile a bit.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 8 Mar 2008 21:35:31 +0000 (22:35 +0100)]
Release v1.3.2
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 8 Mar 2008 21:35:04 +0000 (22:35 +0100)]
Update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 8 Mar 2008 20:30:04 +0000 (21:30 +0100)]
esd: Fix warning: passing argument 1 of 'fpga_boot' discards qualifiers from pointer target type
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Nobuhiro Iwamatsu [Sat, 8 Mar 2008 00:25:49 +0000 (09:25 +0900)]
net: rtl8169: Add processing when OWNbit did't enable in rtl_recv()
When rtl_recv() of rtl8169 is called, OWNbit of status register
is not enable occasionally.
rtl_recv() doesn't work normally when the driver doesn't do
appropriate processing.
This patch fix this problem.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Wolfgang Denk [Sat, 8 Mar 2008 09:55:46 +0000 (10:55 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc83xx
Wolfgang Denk [Sat, 8 Mar 2008 09:51:53 +0000 (10:51 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx
Heiko Schocher [Fri, 7 Mar 2008 07:15:28 +0000 (08:15 +0100)]
mgsuvd: update board configuration
initialize the UPIOx controller.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 7 Mar 2008 07:13:41 +0000 (08:13 +0100)]
mgcoge: update board configuration
add support for the config Flash.
initialize the UPIOx controller.
Signed-off-by: Heiko Schocher <hs@denx.de>
Kim Phillips [Fri, 7 Mar 2008 18:27:31 +0000 (12:27 -0600)]
mpc83xx: make dtb basename file references equal those of linux
the dts file basenames were updated in linux - this helps avoid
inadvertently loading any old dtbs laying around.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Wed, 27 Feb 2008 22:08:22 +0000 (16:08 -0600)]
net: uec_phy: actually increment the timeout counter
allow u-boot to recover (and, e.g., switch to another interface) in the
case where a PHY does not report autonegotiation is complete within its
two second timeout value.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Markus Brunner [Wed, 5 Mar 2008 20:38:12 +0000 (21:38 +0100)]
fix taihu soft spi_read
The taihu board used gpio_read_out_bit which reads the output register and not
the pin state.
Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
Stefan Roese [Fri, 7 Mar 2008 07:01:43 +0000 (08:01 +0100)]
ppc4xx: Sequoia: Add device tree (fdt) Linux booting default env variables
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 7 Mar 2008 06:47:30 +0000 (07:47 +0100)]
Merge branch 'master' of /home/stefan/git/u-boot/u-boot
Dave Liu [Tue, 4 Mar 2008 08:59:22 +0000 (16:59 +0800)]
837xEMDS: Improve the system performance
1. Make the CSB bus pipeline depth as 4, and enable
the repeat mode;
2. Raise the eTSEC emergency priority;
3. Use the highest IP blocks clock.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Detlev Zundel [Thu, 6 Mar 2008 15:45:53 +0000 (16:45 +0100)]
Replace "run load; run update" with conditionalized "run load update".
The latter version stops when "run load" fails for whatever reasons
rendering the combination *a lot* more secure.
Signed-off-by: Detlev Zundel <dzu@denx.de>
Stefan Roese [Wed, 5 Mar 2008 16:22:06 +0000 (17:22 +0100)]
Merge branch 'master' of /home/stefan/git/u-boot/u-boot
Wolfgang Denk [Tue, 4 Mar 2008 23:21:37 +0000 (00:21 +0100)]
Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master
Stefan Roese [Tue, 4 Mar 2008 16:40:41 +0000 (17:40 +0100)]
net: Print error message upon net usage when no ethernet-interface is found
This patch fixes a problem seen on PPC4xx boards, when no MAC address is
defined. Then no ethernet interface is available but a simple "tftp"
command will return without any error message which is quite confusing.
Signed-off-by: Stefan Roese <sr@denx.de>
Jon Loeliger [Tue, 4 Mar 2008 16:03:03 +0000 (10:03 -0600)]
Remove erroneous or extra spd.h #includers.
Many of the spd.h #includers don't need it,
and wanted to have spd_sdram() declared instead.
Since they didn't get that, some also had open
coded extern declarations of it instead or as well.
Fix it all up by using spd_sdram.h where needed.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Wolfgang Denk [Tue, 4 Mar 2008 16:41:28 +0000 (17:41 +0100)]
PCS440EP: fix build problems (redundant #define)
Signed-off-by: Wolfgang Denk <wd@denx.de>
Stefan Roese [Tue, 4 Mar 2008 16:39:25 +0000 (17:39 +0100)]
net: Print error message upon net usage when no ethernet-interface is found
This patch fixes a problem seen on PPC4xx boards, when no MAC address is
defined. Then no ethernet interface is available but a simple "tftp"
command will return without any error message which is quite confusing.
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Tue, 4 Mar 2008 16:38:50 +0000 (17:38 +0100)]
W7OLMC/W7OLMG: fix build problems (redundant #define)
Signed-off-by: Wolfgang Denk <wd@denx.de>
projects / project / bcm63xx / u-boot.git / log