Merge tag 'perf-core-for-mingo-5.4-20190816' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo:

report/script/trace/top:

  Arnaldo Carvalho de Melo:

  - Allow specifying marker events demarcating when to consider the other events,
    i.e. one now can state something like:

        # perf probe kernel_function
        # perf record -e cycles,probe:kernel_function

    And then, in 'perf script' or 'perf report' say:

        # perf report --switch-on=probe:kernel_function

    And then the cycles event samples will be considered only after we
    find the first probe:kernel_function event.

    There is also --switch-off=event, to make it stop considering events
    out of some window, say to avoid some winding down of a workload.

    The same can be done with the "live mode" tools: 'perf top' and 'perf trace'.

    There are examples in the cset comments showing how to use it with
    SDT events in things like 'systemtap', that have those tracepoint-like
    events for the start/end of passes, etc.

    Another example involves selecting scheduler events + entry/exit of
    a syscall, using the syscalls tracepoints, one can then see the
    scheduler events that take place while that syscall is being processed.

    In the future this should be possible in record/top/trace via eBPF
    where the perf tools would hook into the marker events and enable events
    put in place but not enabled when the on/off conditions are the desired
    ones, reducing the amount of events sampled, but this userspace only
    solution should be good enough for many scenarios.

perf vendor events intel:

  Haiyan Song:

  - Add Tremontx event file v1.02.

unwind:

  John Keeping:

  - Fix callchain unwinding when tid != pid, that was working only for the
    thread group leader.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----

iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXVcMPgAKCRCyPKLppCJ+
J6ipAP9F5+TitM1zln/wUUP7/Ug4ZPDsdvA+Ggc8x0Ns7URJQwD/RHk43MgDC1fG
VXbpQ7byj339Wo7SpjadzLl9xPlh/Qw=
=IaYE
-----END PGP SIGNATURE-----

commit e2736219e6ca3117e10651e215b96d66775220da
Author: John Keeping <john@metanate.com>
Date:   Thu Aug 15 11:01:46 2019 +0100

    perf unwind: Remove unnecessary test

    If dwarf_callchain_users is false, then unwind__prepare_access() will
    not set unwind_libunwind_ops so the remaining test here is sufficient.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: john keeping <john@metanate.com>
Link: http://lkml.kernel.org/r/20190815100146.28842-3-john@metanate.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
diff --git a/tools/perf/util/unwind-libunwind.c b/tools/perf/util/unwind-libunwind.c
index b843f9d0a9ea..6499b22b158b 100644
--- a/tools/perf/util/unwind-libunwind.c
+++ b/tools/perf/util/unwind-libunwind.c
@@ -69,18 +69,12 @@ int unwind__prepare_access(struct map_groups *mg, struct map *map,

 void unwind__flush_access(struct map_groups *mg)
 {
- if (!dwarf_callchain_users)
- return;
-
  if (mg->unwind_libunwind_ops)
  mg->unwind_libunwind_ops->flush_access(mg);
 }

 void unwind__finish_access(struct map_groups *mg)
 {
- if (!dwarf_callchain_users)
- return;
-
  if (mg->unwind_libunwind_ops)
  mg->unwind_libunwind_ops->finish_access(mg);
 }

perf unwind: Remove unnecessary test

If dwarf_callchain_users is false, then unwind__prepare_access() will
not set unwind_libunwind_ops so the remaining test here is sufficient.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: john keeping <john@metanate.com>
Link: http://lkml.kernel.org/r/20190815100146.28842-3-john@metanate.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf unwind: Fix libunwind when tid != pid

Commit e5adfc3e7e77 ("perf map: Synthesize maps only for thread group
leader") changed the recording side so that we no longer get mmap events
for threads other than the thread group leader (when synthesising these
events for threads which exist before perf is started).

When a file recorded after this change is loaded, the lack of mmap
records mean that unwinding is not set up for any other threads.

This can be seen in a simple record/report scenario:

perf record --call-graph=dwarf -t $TID
perf report

If $TID is a process ID then the report will show call graphs, but if
$TID is a secondary thread the output is as if --call-graph=none was
specified.

Following the rationale in that commit, move the libunwind fields into
struct map_groups and update the libunwind functions to take this
instead of the struct thread.  This is only required for
unwind__finish_access which must now be called from map_groups__delete
and the others are changed for symmetry.

Note that unwind__get_entries keeps the thread argument since it is
required for symbol lookup and the libdw unwind provider uses the thread
ID.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: e5adfc3e7e77 ("perf map: Synthesize maps only for thread group leader")
Link: http://lkml.kernel.org/r/20190815100146.28842-2-john@metanate.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf map: Use zalloc for map_groups

In the next commit we will add new fields to map_groups and we need
these to be null if no value is assigned.  The simplest way to achieve
this is to request zeroed memory from the allocator.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: john keeping <john@metanate.com>
Link: http://lkml.kernel.org/r/20190815100146.28842-1-john@metanate.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Add --switch-on/--switch-off events

Since 'perf top' shares the histogram browser with 'perf report', then
the same explanation in the previous cset applies.

An additional example uses a pair of SDT events available for systemtap:

  # perf probe --exec=/usr/bin/stap '%*:*'
  Added new events:
    sdt_stap:benchmark__thread__start (on %* in /usr/bin/stap)
    sdt_stap:benchmark   (on %* in /usr/bin/stap)
    sdt_stap:benchmark__thread__end (on %* in /usr/bin/stap)
    sdt_stap:pass6__start (on %* in /usr/bin/stap)
    sdt_stap:pass6__end  (on %* in /usr/bin/stap)
    sdt_stap:pass5__start (on %* in /usr/bin/stap)
    sdt_stap:pass5__end  (on %* in /usr/bin/stap)
    sdt_stap:pass0__start (on %* in /usr/bin/stap)
    sdt_stap:pass0__end  (on %* in /usr/bin/stap)
    sdt_stap:pass1a__start (on %* in /usr/bin/stap)
    sdt_stap:pass1b__start (on %* in /usr/bin/stap)
    sdt_stap:pass1__end  (on %* in /usr/bin/stap)
    sdt_stap:pass2__start (on %* in /usr/bin/stap)
    sdt_stap:pass2__end  (on %* in /usr/bin/stap)
    sdt_stap:pass3__start (on %* in /usr/bin/stap)
    sdt_stap:pass3__end  (on %* in /usr/bin/stap)
    sdt_stap:pass4__start (on %* in /usr/bin/stap)
    sdt_stap:pass4__end  (on %* in /usr/bin/stap)
    sdt_stap:benchmark__start (on %* in /usr/bin/stap)
    sdt_stap:benchmark__end (on %* in /usr/bin/stap)
    sdt_stap:cache__get  (on %* in /usr/bin/stap)
    sdt_stap:cache__clean (on %* in /usr/bin/stap)
    sdt_stap:cache__add__module (on %* in /usr/bin/stap)
    sdt_stap:cache__add__source (on %* in /usr/bin/stap)
    sdt_stap:stap_system__complete (on %* in /usr/bin/stap)
    sdt_stap:stap_system__start (on %* in /usr/bin/stap)
    sdt_stap:stap_system__spawn (on %* in /usr/bin/stap)
    sdt_stap:stap_system__fork (on %* in /usr/bin/stap)
    sdt_stap:intern_string (on %* in /usr/bin/stap)
    sdt_stap:client__start (on %* in /usr/bin/stap)
    sdt_stap:client__end (on %* in /usr/bin/stap)

  You can now use it in all perf tools, such as:

   perf record -e sdt_stap:client__end -aR sleep 1

  #

From these we're use the two below to run systemtap's test suite:

  # perf record -e sdt_stap:pass2__*,cycles:P make installcheck > /dev/null
  ^C[ perf record: Woken up 8 times to write data ]
  [ perf record: Captured and wrote 2.691 MB perf.data (39638 samples) ]
  Terminated
  # perf script | grep sdt_stap
              stap 28979 [000] 19424.302660: sdt_stap:pass2__start: (561b9a537de3) arg1=140730364262544
              stap 28979 [000] 19424.333083:   sdt_stap:pass2__end: (561b9a53a9e1) arg1=140730364262544
              stap 29045 [006] 19424.933460: sdt_stap:pass2__start: (563edddcede3) arg1=140722674883152
              stap 29045 [006] 19424.963794:   sdt_stap:pass2__end: (563edddd19e1) arg1=140722674883152
  # perf script | grep cycles |  wc -l
  39634
  #

Looking at the whole perf.data file:

  [root@quaco testsuite]# perf report | grep cycles:P -A25
  # Samples: 39K of event 'cycles:P'
  # Event count (approx.): 34044267368
  #
  # Overhead  Command  Shared Object         Symbol
  # ........  .......  ....................  ................................
  #
       3.50%  cc1      cc1                   [.] ht_lookup_with_hash
       3.04%  cc1      cc1                   [.] _cpp_lex_token
       2.11%  cc1      cc1                   [.] ggc_internal_alloc
       1.83%  cc1      cc1                   [.] cpp_get_token_with_location
       1.68%  cc1      libc-2.29.so          [.] _int_malloc
       1.41%  cc1      cc1                   [.] linemap_position_for_column
       1.25%  cc1      cc1                   [.] ggc_internal_cleared_alloc
       1.20%  cc1      cc1                   [.] c_lex_with_flags
       1.18%  cc1      cc1                   [.] get_combined_adhoc_loc
       1.05%  cc1      libc-2.29.so          [.] malloc
       1.01%  cc1      libc-2.29.so          [.] _int_free
       0.96%  stap     stap                  [.] std::_Hashtable<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::allocator<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > >, std::__detail::_Identity, std::equal_to<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > >, stringtable_hash, std::__detail::_Mod_range_hashing, std::__detail::_Default_ranged_hash, std::__detail::_Prime_rehash_policy, std::__detail::_Hashtable_traits<true, true, true> >::_M_insert<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__detail::_AllocNode<std::allocator<std::__detail::_Hash_node<std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> >, true> > > >
       0.78%  stap     stap                  [.] lexer::scan
       0.74%  cc1      cc1                   [.] _cpp_lex_direct
       0.70%  cc1      cc1                   [.] pop_scope
       0.70%  cc1      cc1                   [.] c_parser_declspecs
       0.69%  stap     libc-2.29.so          [.] _int_malloc
       0.68%  cc1      cc1                   [.] htab_find_slot
       0.68%  cc1      [kernel.vmlinux]      [k] prepare_exit_to_usermode
       0.64%  cc1      [kernel.vmlinux]      [k] clear_page_erms
  [root@quaco testsuite]#

And now only what happens in slices demarcated by those start/end SDT
events:

  [root@quaco testsuite]# perf report --switch-on=sdt_stap:pass2__start --switch-off=sdt_stap:pass2__end | grep cycles:P -A100
  # Samples: 240  of event 'cycles:P'
  # Event count (approx.): 206491934
  #
  # Overhead  Command  Shared Object        Symbol
  # ........  .......  ...................  ................................................
  #
      38.99%  stap     stap                 [.] systemtap_session::register_library_aliases
      19.47%  stap     stap                 [.] match_key::operator<
      15.01%  stap     libc-2.29.so         [.] __memcmp_avx2_movbe
       5.19%  stap     libc-2.29.so         [.] _int_malloc
       2.50%  stap     libstdc++.so.6.0.26  [.] std::_Rb_tree_insert_and_rebalance
       2.30%  stap     stap                 [.] match_node::build_no_more
       2.07%  stap     libc-2.29.so         [.] malloc
       1.66%  stap     stap                 [.] std::_Rb_tree<match_key, std::pair<match_key const, match_node*>, std::_Select1st<std::pair<match_key const, match_node*> >, std::less<match_key>, std::allocator<std::pair<match_key const, match_node*> > >::find
       1.66%  stap     stap                 [.] match_node::bind
       1.58%  stap     [kernel.vmlinux]     [k] prepare_exit_to_usermode
       1.17%  stap     [kernel.vmlinux]     [k] native_irq_return_iret
       0.87%  stap     stap                 [.] 0x0000000000032ec4
       0.77%  stap     libstdc++.so.6.0.26  [.] std::_Rb_tree_increment
       0.47%  stap     stap                 [.] std::vector<derived_probe_builder*, std::allocator<derived_probe_builder*> >::_M_realloc_insert<derived_probe_builder* const&>
       0.47%  stap     [kernel.vmlinux]     [k] get_page_from_freelist
       0.47%  stap     [kernel.vmlinux]     [k] swapgs_restore_regs_and_return_to_usermode
       0.47%  stap     [kernel.vmlinux]     [k] do_user_addr_fault
       0.46%  stap     [kernel.vmlinux]     [k] __pagevec_lru_add_fn
       0.46%  stap     stap                 [.] std::_Rb_tree<match_key, std::pair<match_key const, match_node*>, std::_Select1st<std::pair<match_key const, match_node*> >, std::less<match_key>, std::allocator<std::pair<match_key const, match_node*> > >::_M_emplace_unique<std::pair<match_key, match_node*> >
       0.42%  stap     libstdc++.so.6.0.26  [.] 0x00000000000c18fa
       0.40%  stap     [kernel.vmlinux]     [k] interrupt_entry
       0.40%  stap     [kernel.vmlinux]     [k] update_load_avg
       0.40%  stap     [kernel.vmlinux]     [k] __intel_pmu_disable_all
       0.40%  stap     [kernel.vmlinux]     [k] clear_page_erms
       0.39%  stap     [kernel.vmlinux]     [k] __mod_node_page_state
       0.39%  stap     [kernel.vmlinux]     [k] error_entry
       0.39%  stap     [kernel.vmlinux]     [k] sync_regs
       0.38%  stap     [kernel.vmlinux]     [k] __handle_mm_fault
       0.38%  stap     stap                 [.] derive_probes

  #
  # (Tip: System-wide collection from all CPUs: perf record -a)
  #
  [root@quaco testsuite]#

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-408hvumcnyn93a0auihnawew@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf top: Add --switch-on/--switch-off events

Just like 'perf trace' and 'perf script', should be useful for instance
to only consider samples after the initialization phase of some
workload.

The man page has some examples and considerations about its current
interface, that still doesn't handle the on/off events in a special way,
behaving just like when multiple events are specified, i.e.:

- In non-group mode (when the event list is not enclosed in {}) show a
  a menu to allow choosing which event the user wants to see in the
  histograms browser

- In group mode, be it using {} or asking for --group, show one column
  per event.

Try for instance:

  # perf top -e '{cycles,instructions,probe:icmp_rcv}' --switch-on=probe:icmp_rcv

Replace probe:icmp_rcv, that I put in place using:

  # perf probe icmp_rcv:59

To hit when broadcast packets arrive, with a probe installed after an
initialization phase is over or after some other point of interest, some
garbage collection, etc, and also use --switch-off, for instance, on a
probe installed after said garbage collection is over.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-c7q7qjeqtyvc9mkeipxza6ne@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf trace: Add --switch-on/--switch-off events

Just like with 'perf script':

  # perf trace -e sched:*,syscalls:*sleep* sleep 1
       0.000 :28345/28345 sched:sched_waking:comm=perf pid=28346 prio=120 target_cpu=005
       0.005 :28345/28345 sched:sched_wakeup:perf:28346 [120] success=1 CPU:005
       0.383 sleep/28346 sched:sched_process_exec:filename=/usr/bin/sleep pid=28346 old_pid=28346
       0.613 sleep/28346 sched:sched_stat_runtime:comm=sleep pid=28346 runtime=607375 [ns] vruntime=23289041218 [ns]
       0.689 sleep/28346 syscalls:sys_enter_nanosleep:rqtp: 0x7ffc491789b0
       0.693 sleep/28346 sched:sched_stat_runtime:comm=sleep pid=28346 runtime=72021 [ns] vruntime=23289113239 [ns]
       0.694 sleep/28346 sched:sched_switch:sleep:28346 [120] S ==> swapper/5:0 [120]
    1000.787 :0/0 sched:sched_waking:comm=sleep pid=28346 prio=120 target_cpu=005
    1000.824 :0/0 sched:sched_wakeup:sleep:28346 [120] success=1 CPU:005
    1000.908 sleep/28346 syscalls:sys_exit_nanosleep:0x0
    1001.218 sleep/28346 sched:sched_process_exit:comm=sleep pid=28346 prio=120
  # perf trace -e sched:*,syscalls:*sleep* --switch-on=syscalls:sys_enter_nanosleep sleep 1
       0.000 sleep/28349 sched:sched_stat_runtime:comm=sleep pid=28349 runtime=603036 [ns] vruntime=23873537697 [ns]
       0.001 sleep/28349 sched:sched_switch:sleep:28349 [120] S ==> swapper/4:0 [120]
    1000.392 :0/0 sched:sched_waking:comm=sleep pid=28349 prio=120 target_cpu=004
    1000.443 :0/0 sched:sched_wakeup:sleep:28349 [120] success=1 CPU:004
    1000.540 sleep/28349 syscalls:sys_exit_nanosleep:0x0
    1000.852 sleep/28349 sched:sched_process_exit:comm=sleep pid=28349 prio=120
  # perf trace -e sched:*,syscalls:*sleep* --switch-on=syscalls:sys_enter_nanosleep --switch-off=syscalls:sys_exit_nanosleep sleep 1
       0.000 sleep/28352 sched:sched_stat_runtime:comm=sleep pid=28352 runtime=610543 [ns] vruntime=24811686681 [ns]
       0.001 sleep/28352 sched:sched_switch:sleep:28352 [120] S ==> swapper/0:0 [120]
    1000.397 :0/0 sched:sched_waking:comm=sleep pid=28352 prio=120 target_cpu=000
    1000.440 :0/0 sched:sched_wakeup:sleep:28352 [120] success=1 CPU:000
  #
  # perf trace -e sched:*,syscalls:*sleep* --switch-on=syscalls:sys_enter_nanosleep --switch-off=syscalls:sys_exit_nanosleep --show-on-off sleep 1
       0.000 sleep/28367 syscalls:sys_enter_nanosleep:rqtp: 0x7fffd1a25fc0
       0.004 sleep/28367 sched:sched_stat_runtime:comm=sleep pid=28367 runtime=628760 [ns] vruntime=22170052672 [ns]
       0.005 sleep/28367 sched:sched_switch:sleep:28367 [120] S ==> swapper/2:0 [120]
    1000.367 :0/0 sched:sched_waking:comm=sleep pid=28367 prio=120 target_cpu=002
    1000.412 :0/0 sched:sched_wakeup:sleep:28367 [120] success=1 CPU:002
    1000.512 sleep/28367 syscalls:sys_exit_nanosleep:0x0
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-t3ngpt1brcc1fm9gep9gxm4q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evswitch: Add hint when not finding specified on/off events

If the user specifies a on or off switch event and it isn't in the
perf.data file, provide a hint about how to see the events in the
perf.data evlist:

  # perf script --switch-on=syscall:sys_enter_nanosleep --switch-off=syscalls:sys_exit_nanosleep
  ERROR: event_on event not found (syscall:sys_enter_nanosleep)
  HINT:  use 'perf evlist' to see the available event names
  #
  # perf evlist
  sched:sched_kthread_stop
  sched:sched_kthread_stop_ret
  sched:sched_waking
  sched:sched_wakeup
  sched:sched_wakeup_new
  sched:sched_switch
  sched:sched_migrate_task
  sched:sched_process_free
  sched:sched_process_exit
  sched:sched_wait_task
  sched:sched_process_wait
  sched:sched_process_fork
  sched:sched_process_exec
  sched:sched_stat_wait
  sched:sched_stat_sleep
  sched:sched_stat_iowait
  sched:sched_stat_blocked
  sched:sched_stat_runtime
  sched:sched_pi_setprio
  sched:sched_move_numa
  sched:sched_stick_numa
  sched:sched_swap_numa
  sched:sched_wake_idle_without_ipi
  syscalls:sys_enter_clock_nanosleep
  syscalls:sys_exit_clock_nanosleep
  syscalls:sys_enter_nanosleep
  syscalls:sys_exit_nanosleep
  # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
  #
  # perf script --switch-on=syscalls:sys_enter_nanosleep --switch-off=syscalls:sys_exit_nanosleep
       sleep 20919 [001] 109866.144411:  sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [ns]
       sleep 20919 [001] 109866.144412:        sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120]
     swapper     0 [001] 109867.144568:        sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001
     swapper     0 [001] 109867.144586:        sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-iijjvdlyad973oskdq8gmi5w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evswitch: Move enoent error message printing to separate function

Allows adding hints there, will be done in followup patch.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-1kvrdi7weuz3hxycwvarcu6v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evswitch: Introduce init() method to set the on/off evsels from the command line

Another step in having all the boilerplate in just one place to then use
in the other tools.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-snreb1wmwyjei3eefwotxp1l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evswitch: Introduce OPTS_EVSWITCH() for cmd line processing

All tools will want those, so provide a convenient way to get them.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-v16pe3sbf3wjmn152u18f649@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evswitch: Add the names of on/off events

So that we can have macros for the OPT_ entries and also for finding
those in an evlist, this way other tools will use this very easily.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-q0og1xoqqi0w38ve5u0a43k2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evswitch: Move switch logic to use in other tools

Now other tools that want switching can use an evswitch for that, just
set it up and add it to the PERF_RECORD_SAMPLE processing function.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-b1trj1q97qwfv251l66q3noj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evswitch: Move struct to a separate header to use in other tools

Now that we see that the simple userspace-based "slicing" of events
using delimiter events ("markers") works, lets move it to a separate
header to make it available to other tools, next step will be having
the switch on/off check done at the PERF_RECORD_SAMPLE processing
function moved too.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-z0cyi9ifzlr37cedr9xztc1k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Allow specifying event to switch off processing of other events

Counterpart of --switch-on:

  # perf record -e sched:*,syscalls:sys_*_nanosleep sleep 1
  [ perf record: Woken up 36 times to write data ]
  [ perf record: Captured and wrote 0.032 MB perf.data (10 samples) ]
  #
  # perf script
      :20918 20918 [002] 109866.143696:            sched:sched_waking: comm=perf pid=20919 prio=120 target_cpu=001
      :20918 20918 [002] 109866.143702:            sched:sched_wakeup: perf:20919 [120] success=1 CPU:001
       sleep 20919 [001] 109866.144081:      sched:sched_process_exec: filename=/usr/bin/sleep pid=20919 old_pid=20919
       sleep 20919 [001] 109866.144408:  syscalls:sys_enter_nanosleep: rqtp: 0x7ffc2384fef0, rmtp: 0x00000000
       sleep 20919 [001] 109866.144411:      sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n>
       sleep 20919 [001] 109866.144412:            sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120]
     swapper     0 [001] 109867.144568:            sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001
     swapper     0 [001] 109867.144586:            sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001
       sleep 20919 [001] 109867.144614:   syscalls:sys_exit_nanosleep: 0x0
       sleep 20919 [001] 109867.144753:      sched:sched_process_exit: comm=sleep pid=20919 prio=120
  #
  # perf script --switch-off syscalls:sys_exit_nanosleep
      :20918 20918 [002] 109866.143696:            sched:sched_waking: comm=perf pid=20919 prio=120 target_cpu=001
      :20918 20918 [002] 109866.143702:            sched:sched_wakeup: perf:20919 [120] success=1 CPU:001
       sleep 20919 [001] 109866.144081:      sched:sched_process_exec: filename=/usr/bin/sleep pid=20919 old_pid=20919
       sleep 20919 [001] 109866.144408:  syscalls:sys_enter_nanosleep: rqtp: 0x7ffc2384fef0, rmtp: 0x00000000
       sleep 20919 [001] 109866.144411:      sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n>
       sleep 20919 [001] 109866.144412:            sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120]
     swapper     0 [001] 109867.144568:            sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001
     swapper     0 [001] 109867.144586:            sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001
       sleep 20919 [001] 109867.144753:      sched:sched_process_exit: comm=sleep pid=20919 prio=120
  #
  # perf script --switch-on syscalls:sys_enter_nanosleep --switch-off syscalls:sys_exit_nanosleep
       sleep 20919 [001] 109866.144411:      sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n>
       sleep 20919 [001] 109866.144412:            sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120]
     swapper     0 [001] 109867.144568:            sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001
     swapper     0 [001] 109867.144586:            sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001
  #
  # perf script --switch-on syscalls:sys_enter_nanosleep --switch-off syscalls:sys_exit_nanosleep --show-on-off
       sleep 20919 [001] 109866.144408:  syscalls:sys_enter_nanosleep: rqtp: 0x7ffc2384fef0, rmtp: 0x00000000
       sleep 20919 [001] 109866.144411:      sched:sched_stat_runtime: comm=sleep pid=20919 runtime=521249 [ns] vruntime=202919398131 [n>
       sleep 20919 [001] 109866.144412:            sched:sched_switch: sleep:20919 [120] S ==> swapper/1:0 [120]
     swapper     0 [001] 109867.144568:            sched:sched_waking: comm=sleep pid=20919 prio=120 target_cpu=001
     swapper     0 [001] 109867.144586:            sched:sched_wakeup: sleep:20919 [120] success=1 CPU:001
       sleep 20919 [001] 109867.144614:   syscalls:sys_exit_nanosleep: 0x0
  #

Now think about using this together with 'perf probe' to create custom on/off
events in your app :-)

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-li3j01c4tmj9kw6ydsl8swej@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Allow showing the --switch-on event

One may want to see the --switch-on event as well, allow for that, using
the previous cset example:

  # perf script --switch-on syscalls:sys_enter_nanosleep --show-on-off
        sleep 13638 [001] 108237.582286: syscalls:sys_enter_nanosleep: rqtp: 0x7fff1948ac40, rmtp: 0x00000000
        sleep 13638 [001] 108237.582289:     sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns]
        sleep 13638 [001] 108237.582291:           sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120]
      swapper     0 [001] 108238.582428:           sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001
      swapper     0 [001] 108238.582458:           sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001
        sleep 13638 [001] 108238.582698:     sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns]
        sleep 13638 [001] 108238.582782:     sched:sched_process_exit: comm=sleep pid=13638 prio=120
  #
  # perf script --switch-on syscalls:sys_enter_nanosleep
        sleep 13638 [001] 108237.582289:     sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns]
        sleep 13638 [001] 108237.582291:           sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120]
      swapper     0 [001] 108238.582428:           sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001
      swapper     0 [001] 108238.582458:           sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001
        sleep 13638 [001] 108238.582698:     sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns]
        sleep 13638 [001] 108238.582782:     sched:sched_process_exit: comm=sleep pid=13638 prio=120
  #

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Cc: Florian Weimer <fweimer@redhat.com>
Link: https://lkml.kernel.org/n/tip-0omwwoywj1v63gu8cz0tr0cy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Allow specifying event to switch on processing of other events

Sometime we want to only consider events after something happens, so
allow discarding events till such events is found, e.g.:

Record all scheduler tracepoints and the sys_enter_nanosleep syscall
event for the 'sleep 1' workload:

  # perf record -e sched:*,syscalls:sys_enter_nanosleep sleep 1
  [ perf record: Woken up 31 times to write data ]
  [ perf record: Captured and wrote 0.032 MB perf.data (10 samples) ]
  #

So we have these events in the generated perf data file:

  # perf evlist
  sched:sched_kthread_stop
  sched:sched_kthread_stop_ret
  sched:sched_waking
  sched:sched_wakeup
  sched:sched_wakeup_new
  sched:sched_switch
  sched:sched_migrate_task
  sched:sched_process_free
  sched:sched_process_exit
  sched:sched_wait_task
  sched:sched_process_wait
  sched:sched_process_fork
  sched:sched_process_exec
  sched:sched_stat_wait
  sched:sched_stat_sleep
  sched:sched_stat_iowait
  sched:sched_stat_blocked
  sched:sched_stat_runtime
  sched:sched_pi_setprio
  sched:sched_move_numa
  sched:sched_stick_numa
  sched:sched_swap_numa
  sched:sched_wake_idle_without_ipi
  syscalls:sys_enter_nanosleep
  # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
  #

Then show all of the events that actually took place in this 'perf record' session:

  # perf script
          :13637 13637 [002] 108237.581529:            sched:sched_waking: comm=perf pid=13638 prio=120 target_cpu=001
          :13637 13637 [002] 108237.581537:            sched:sched_wakeup: perf:13638 [120] success=1 CPU:001
           sleep 13638 [001] 108237.581992:      sched:sched_process_exec: filename=/usr/bin/sleep pid=13638 old_pid=13638
           sleep 13638 [001] 108237.582286:  syscalls:sys_enter_nanosleep: rqtp: 0x7fff1948ac40, rmtp: 0x00000000
           sleep 13638 [001] 108237.582289:      sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns]
           sleep 13638 [001] 108237.582291:            sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120]
         swapper     0 [001] 108238.582428:            sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001
         swapper     0 [001] 108238.582458:            sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001
           sleep 13638 [001] 108238.582698:      sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns]
           sleep 13638 [001] 108238.582782:      sched:sched_process_exit: comm=sleep pid=13638 prio=120
  #

Now lets see only the ones that took place after a certain "marker":

  # perf script --switch-on syscalls:sys_enter_nanosleep
           sleep 13638 [001] 108237.582289:      sched:sched_stat_runtime: comm=sleep pid=13638 runtime=578104 [ns] vruntime=202889459556 [ns]
           sleep 13638 [001] 108237.582291:            sched:sched_switch: sleep:13638 [120] S ==> swapper/1:0 [120]
         swapper     0 [001] 108238.582428:            sched:sched_waking: comm=sleep pid=13638 prio=120 target_cpu=001
         swapper     0 [001] 108238.582458:            sched:sched_wakeup: sleep:13638 [120] success=1 CPU:001
           sleep 13638 [001] 108238.582698:      sched:sched_stat_runtime: comm=sleep pid=13638 runtime=173915 [ns] vruntime=202889633471 [ns]
           sleep 13638 [001] 108238.582782:      sched:sched_process_exit: comm=sleep pid=13638 prio=120
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: William Cohen <wcohen@redhat.com>
Link: https://lkml.kernel.org/n/tip-f1oo0ufdhrkx6nhy2lj1ierm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events intel: Add Tremontx event file v1.02

Add a Intel event file for perf.

Signed-off-by: Haiyan Song <haiyanx.song@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190815035942.30602-1-haiyanx.song@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-5.4-20190814' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo:

Intel PT:

  Adrian Hunter:

  - Add PEBS via Intel PT support, the kernel bits went via PeterZ.

perf record:

  Alexander Shishkin:

  - Add an option to take an AUX snapshot on exit.

  Tan Xiaojun:

  - Support aarch64 random socket_id assignment, just like was fixed for S/390.

tools:

  Andy Shevchenko:

  - Keep list of tools in alphabetical order on 'make -C tools help'.

perf session:

  Arnaldo Carvalho de Melo:

  - Avoid infinite loop when seeing invalid header.size, reported by
    Vince Weaver using a perf.data fuzzer.

Documentation:

  Vince Weaver:

  - Clarify HEADER_SAMPLE_TOPOLOGY format in the perf.data spec.

perf config:

  Arnaldo Carvalho de Melo:

  - Honour $PERF_CONFIG env var to specify alternate .perfconfig.

perf test:

  Arnaldo Carvalho de Melo:

  - Disable ~/.perfconfig to get default output in 'perf trace' tests.

perf top:

  Arnaldo Carvalho de Melo:

  - Set display thread COMM to help with debugging.

  - Collapse and resort evsels in a group, so that we have output
    similar to 'perf report' when using event groups, i.e.

      perf top -e '{cycles,instructions}'

    Will have two columns, and the instructions one will work.

core:

  Igor Lubashev:

  - Detect if libcap development files are available so that we
    can use capabilities to match the checks made by the kernel instead
    of using plain (geteuid() == 0).

Intel:

  Haiyan Song:

  - Add Icelake V1.00 event file.

perf trace:

  Leo Yan:

  - Fix segmentation fault when access syscall info on arm64.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf ui: No need to set ui_browser to 1 twice

We need to do it only when fallbacking from GTK to the TUI.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dda0acxqef1k72n9z4myjbjt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf record: Support aarch64 random socket_id assignment

Same as in the commit 01766229533f ("perf record: Support s390 random
socket_id assignment"), aarch64 also have this problem.

Without this fix:

  [root@localhost perf]# ./perf report --header -I -v
  ...
  socket_id number is too big.You may need to upgrade the perf tool.

  # ========
  # captured on    : Thu Aug  1 22:58:38 2019
  # header version : 1
  ...
  # Core ID and Socket ID information is not available
  ...

With this fix:
  [root@localhost perf]# ./perf report --header -I -v
  ...
  cpumask list: 0-31
  cpumask list: 32-63
  cpumask list: 64-95
  cpumask list: 96-127

  # ========
  # captured on    : Thu Aug  1 22:58:38 2019
  # header version : 1
  ...
  # CPU 0: Core ID 0, Socket ID 36
  # CPU 1: Core ID 1, Socket ID 36
  ...
  # CPU 126: Core ID 126, Socket ID 8442
  # CPU 127: Core ID 127, Socket ID 8442
  ...

Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Link: http://lkml.kernel.org/r/1564717737-21602-1-git-send-email-tanxiaojun@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf.data documentation: Clarify HEADER_SAMPLE_TOPOLOGY format

The perf.data file format documentation for HEADER_SAMPLE_TOPOLOGY
specifies the layout in a confusing manner that doesn't match the rest
of the document.  This patch attempts to describe things consistent with
the rest of the file.

Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1908011425240.14303@macbook-air
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools: Keep list of tools in alphabetical order

When `make help` is executed it lists the possible tools to build,
though couple of entries is kept unordered. Fix it here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-0ke3p64ksa0hnbueh52n3v3q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evsel: Provide meaningful warning when trying to use 'aux_output' on older kernels

Just like we do with the 'write_backwards' feature:

Before:

  # perf record -e {intel_pt/branch=0/,cycles/aux-output/ppp} uname
  Error:
  The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cycles/aux-output/ppp).
  /bin/dmesg | grep -i perf may provide additional information.

  #

After:

  # perf record -e {intel_pt/branch=0/,cycles/aux-output/ppp} uname
  Error:
  The 'aux_output' feature is not supported, update the kernel.
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-wgjsjroe1e150c0metgwmqwd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf intel-pt: Add brief documentation for PEBS via Intel PT

Document how to select PEBS via Intel PT and how to display synthesized
PEBS samples.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-8-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
[ Update the example to use a group with intel_pt// as the group leader, as per Alex comment ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add aux-output config term

Expose the aux_output attribute flag to the user to configure, by adding a
config term 'aux-output'. For events that support it, selection of
'aux-output' causes the generation of AUX records instead of event records.
This requires that an AUX area event is also provided.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-7-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf intel-pt: Process options for PEBS event synthesis

Process synth_opts.other_events and attr.aux_output to set up for
synthesizing PEBs via Intel PT events.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-6-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
[ Fixed up libbperf clashes, i.e. some places using perf_evsel (now in libperf)
  need to use instead 'evsel' (a tools/perf only abstraction) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add itrace option 'o' to synthesize aux-output events

Add itrace option 'o' to synthesize events recorded in the AUX area due
to the use of perf record's aux-output config term.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-5-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add aux_output attribute flag

Add aux_output attribute flag to match the kernel's perf_event.h file.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806084606.4021-4-alexander.shishkin@linux.intel.com
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf record: Add an option to take an AUX snapshot on exit

It is sometimes useful to generate a snapshot when perf record exits;
I've been using a wrapper script around the workload that would do a
killall -USR2 perf when the workload exits.

This patch makes it easier and also works when perf record is attached
to a pre-existing task. A new snapshot option 'e' can be specified in
-S to enable this behavior:

root@elsewhere:~# perf record -e intel_pt// -Se sleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.085 MB perf.data ]

Co-developed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190806144101.62892-1-alexander.shishkin@linux.intel.com
[ Fixed up !HAVE_AUXTRACE_SUPPORT build in builtin-record.c, adding 2 missing __maybe_unused ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf ftrace: Improve error message about capability to use ftrace

If we link against libcap, then we can state that CAP_SYS_ADMIN is
needed, if not, fallback to telling the user it needs to be root, as was
before linking against libcap.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/n/tip-hhnbjdo8r67054of9zm2kxtl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf ftrace: Use CAP_SYS_ADMIN instead of euid==0

The kernel requires CAP_SYS_ADMIN instead of euid==0 to mount debugfs
for ftrace.  Make perf do the same.

Signed-off-by: Igor Lubashev <ilubashe@akamai.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/bd8763b72ed4d58d0b42d44fbc7eb474d32e53a3.1565188228.git.ilubashe@akamai.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add CAP_SYSLOG define for older systems

Some of the systems I test don't have that define, provide it
conditionally since we'll use it in the kptr_restrict checks in the next
patch.

Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/n/tip-dcize2v6jjab7tds5ngz97dk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add NO_LIBCAP=1 to the minimal build test

We need to add these so that we test building without all selectable
features.

Acked-by: Igor Lubashev <ilubashe@akamai.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lkml.kernel.org/n/tip-eknnvp22elznj0cl5a39hc4v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add helpers to use capabilities if present

Add utilities to help checking capabilities of the running procss.  Make
perf link with libcap, if it is available. If no libcap-dev[el],
fallback to the geteuid() == 0 test used before.

Committer notes:

  $ perf test python
  18: 'import perf' in python                               : FAILED!
  $ perf test -v python
  Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
  18: 'import perf' in python                               :
  --- start ---
  test child forked, pid 23288
  Traceback (most recent call last):
    File "<stdin>", line 1, in <module>
  ImportError: /tmp/build/perf/python/perf.so: undefined symbol: cap_get_flag
  test child finished with -1
  ---- end ----
  'import perf' in python: FAILED!
  $

This happens because differently from the perf binary generated with
this patch applied:

  $ ldd /tmp/build/perf/perf | grep libcap
   libcap.so.2 => /lib64/libcap.so.2 (0x00007f724a4ef000)
  $

The python binding isn't linking with libcap:

  $ ldd /tmp/build/perf/python/perf.so | grep libcap
  $

So add 'cap' to the 'extra_libraries' variable in
tools/perf/util/setup.py, and rebuild:

  $ perf test python
  18: 'import perf' in python                               : Ok
  $

If we explicitely disable libcap it also continues to work:

  $ make NO_LIBCAP=1 -C tools/perf O=/tmp/build/perf install-bin
    $ ldd /tmp/build/perf/perf | grep libcap
  $ ldd /tmp/build/perf/python/perf.so | grep libcap
  $ perf test python
  18: 'import perf' in python                               : Ok
  $

Signed-off-by: Igor Lubashev <ilubashe@akamai.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
[ split from a larger patch ]
Link: http://lkml.kernel.org/r/8a1e76cf5c7c9796d0d4d240fbaa85305298aafa.1565188228.git.ilubashe@akamai.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools build: Add capability-related feature detection

Add utilities to help checking capabilities of the running procss.  Make
perf link with libcap, if it is available. If no libcap-dev[el], assume
no capabilities.

Committer testing:

  $ make O=/tmp/build/perf -C tools/perf install-bin
  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j8' parallel build

  Auto-detecting system features:
  <SNIP>
  ...                        libbfd: [ on  ]
  ...                        libcap: [ OFF ]
  ...                        libelf: [ on  ]
  <SNIP>
  Makefile.config:833: No libcap found, disables capability support, please install libcap-devel/libcap-dev
  <SNIP>
  $ grep libcap /tmp/build/perf/FEATURE-DUMP
  feature-libcap=0
  $ cat /tmp/build/perf/feature/test-libcap.make.output
  test-libcap.c:2:10: fatal error: sys/capability.h: No such file or directory
      2 | #include <sys/capability.h>
        |          ^~~~~~~~~~~~~~~~~~
  compilation terminated.
  $

Now install libcap-devel and try again:

  $ make O=/tmp/build/perf -C tools/perf install-bin
  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j8' parallel build
  Warning: Kernel ABI header at 'tools/include/linux/bits.h' differs from latest version at 'include/linux/bits.h'
  diff -u tools/include/linux/bits.h include/linux/bits.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h

  Auto-detecting system features:
  <SNIP>
  ...                        libbfd: [ on  ]
  ...                        libcap: [ on  ]
  ...                        libelf: [ on  ]
  <SNIP>>
    CC       /tmp/build/perf/jvmti/libjvmti.o
  <SNIP>>
  $ grep libcap /tmp/build/perf/FEATURE-DUMP
  feature-libcap=1
  $ cat /tmp/build/perf/feature/test-libcap.make.output
  $ ldd /tmp/build/perf/feature/test-libcap.make.bin
  ldd: /tmp/build/perf/feature/test-libcap.make.bin: No such file or directory
  $ ldd /tmp/build/perf/feature/test-libcap.bin
   linux-vdso.so.1 (0x00007ffc35bfe000)
   libcap.so.2 => /lib64/libcap.so.2 (0x00007ff9c62ff000)
   libc.so.6 => /lib64/libc.so.6 (0x00007ff9c6139000)
   /lib64/ld-linux-x86-64.so.2 (0x00007ff9c6326000)
  $

Signed-off-by: Igor Lubashev <ilubashe@akamai.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
[ split from a larger patch ]
Link: http://lkml.kernel.org/r/8a1e76cf5c7c9796d0d4d240fbaa85305298aafa.1565188228.git.ilubashe@akamai.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf top: Collapse and resort all evsels in a group

And link them, i.e. find the hist entries in the non-leader events and
link them to the ones in the leader.

This should be the same thing already done for the 'perf report' case,
but now we do it periodically.

With this in place we get percentages in from the second overhead column
on, not just on the first (the leader).

Try it using:

  perf top --stdio -e '{cycles,instructions}'

You should see something like:

   PerfTop:   20776 irqs/sec  kernel:68.7%  exact:  0.0% lost: 0/0 drop: 0/0 [cycles],  (all, 8 CPUs)
  ---------------------------------------------------------------------------------------------------

     4.44%   0.44%  [kernel]                 [k] do_syscall_64
     2.27%   0.17%  [kernel]                 [k] entry_SYSCALL_64
     1.73%   0.27%  [kernel]                 [k] syscall_return_via_sysret
     1.60%   0.91%  [kernel]                 [k] _raw_spin_lock_irqsave
     1.45%   3.53%  libglib-2.0.so.0.6000.4  [.] g_string_insert_unichar
     1.39%   0.21%  [kernel]                 [k] copy_user_enhanced_fast_string
     1.26%   1.15%  [kernel]                 [k] psi_task_change
     1.16%   0.14%  libpixman-1.so.0.38.0    [.] 0x000000000006f403
     1.00%   0.32%  [kernel]                 [k] __sched_text_start
     0.97%   2.11%  [kernel]                 [k] n_tty_write
     0.96%   0.04%  [kernel]                 [k] queued_spin_lock_slowpath
     0.93%   0.88%  [kernel]                 [k] menu_select
     0.87%   0.14%  [kernel]                 [k] try_to_wake_up
     0.77%   0.10%  libpixman-1.so.0.38.0    [.] 0x000000000006f40b
     0.73%   0.09%  libpixman-1.so.0.38.0    [.] 0x000000000006f413
     0.69%   0.48%  libc-2.29.so             [.] __memmove_avx_unaligned_erms
     0.68%   0.29%  [kernel]                 [k] _raw_spin_lock_irq
     0.61%   0.04%  libpixman-1.so.0.38.0    [.] 0x000000000006f423
     0.60%   0.37%  [kernel]                 [k] native_sched_clock
     0.57%   0.23%  [kernel]                 [k] do_idle
     0.57%   0.23%  [kernel]                 [k] __fget
     0.56%   0.30%  [kernel]                 [k] __switch_to_asm
     0.56%   0.00%  libc-2.29.so             [.] __memset_avx2_erms
     0.52%   0.32%  [kernel]                 [k] _raw_spin_lock
     0.49%   0.24%  [kernel]                 [k] n_tty_poll
     0.49%   0.54%  libglib-2.0.so.0.6000.4  [.] g_mutex_lock
     0.48%   0.62%  [kernel]                 [k] _raw_spin_unlock_irqrestore
     0.47%   0.27%  [kernel]                 [k] __switch_to
     0.47%   0.25%  [kernel]                 [k] pick_next_task_fair
     0.45%   0.17%  [kernel]                 [k] filldir64
     0.40%   0.16%  [kernel]                 [k] update_rq_clock
     0.39%   0.19%  [kernel]                 [k] enqueue_task_fair
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-uw8cjeifxvjpkjp6x2iil0ar@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hist: Remove dummy entries when finding real ones.

When he have an event group we have multiple struct hist instances, one
per evsel, and in each of these hists we may have hist_entries that
point to the same thing being observed, say a symbol, i.e. if we're
looking at instructions and cycles, then we'll have one hist_entry in
the "instructions" evsel and another in the "cycles" evsel.

We need to link those to then show one column for each. When we're
looking at some other pair of events, say instructions and cache misses,
we may have just the "instructions" hist entry and not one for "cache
misses", as instructions not necessarily generate cache misses, as the
logic expects one hist_entry per evsel, we end up adding "dummy"
hist_entries.

This is enough for 'perf report', that does this matching operation
(hists__match()) just once after processing all events, but for 'perf
top', we do this at each refresh, so we may finally find events matching
and then we need to trow away the dummies and link with the real events.

So if we find a match, traverse the link of matches and trow away
dummies for that hists.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dwvtjqqifsbsczeb35q6mqkk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf trace: Fix segmentation fault when access syscall info on arm64

'perf trace' reports the segmentation fault as below on Arm64:

  # perf trace -e string -e augmented_raw_syscalls.c
  LLVM: dumping tools/perf/examples/bpf/augmented_raw_syscalls.o
  perf: Segmentation fault
  Obtained 12 stack frames.
  perf(sighandler_dump_stack+0x47) [0xaaaaac96ac87]
  linux-vdso.so.1(+0x5b7) [0xffffadbeb5b7]
  /lib/aarch64-linux-gnu/libc.so.6(strlen+0x10) [0xfffface7d5d0]
  /lib/aarch64-linux-gnu/libc.so.6(_IO_vfprintf+0x1ac7) [0xfffface49f97]
  /lib/aarch64-linux-gnu/libc.so.6(__vsnprintf_chk+0xc7) [0xffffacedfbe7]
  perf(scnprintf+0x97) [0xaaaaac9ca3ff]
  perf(+0x997bb) [0xaaaaac8e37bb]
  perf(cmd_trace+0x28e7) [0xaaaaac8ec09f]
  perf(+0xd4a13) [0xaaaaac91ea13]
  perf(main+0x62f) [0xaaaaac8a147f]
  /lib/aarch64-linux-gnu/libc.so.6(__libc_start_main+0xe3) [0xfffface22d23]
  perf(+0x57723) [0xaaaaac8a1723]
  Segmentation fault

This issue is introduced by commit 30a910d7d3e0 ("perf trace:
Preallocate the syscall table"), it allocates trace->syscalls.table[]
array and the element count is 'trace->sctbl->syscalls.nr_entries'; but
on Arm64, the system call number is not continuously used; e.g. the
syscall maximum id is 436 but the real entries is only 281.

So the table is allocated with 'nr_entries' as the element count, but it
accesses the table with the syscall id, which might be out of the bound
of the array and cause the segmentation fault.

This patch allocates trace->syscalls.table[] with the element count is
'trace->sctbl->syscalls.max_id + 1', this allows any id to access the
table without out of the bound.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Fixes: 30a910d7d3e0 ("perf trace: Preallocate the syscall table")
Link: http://lkml.kernel.org/r/20190809104752.27338-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists: Do not link a pair if already linked

When we have multiple events in a group we link hist_entries in the
non-leader evsel hists to the one in the leader that points to the same
sorting criteria, in hists__match().

For 'perf report' we do this just once and then print the results, but
for 'perf top' we need to look if this was already done in the previous
refresh of the screen, so check for that and don't try to link again.

This is part of having 'perf top' using the hists browser for showing
multiple events in multiple columns.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-iwvb37rgb7upswhruwpcdnhw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf top: Set display thread COMM to help with debugging

When we want to attach just to the thread that updates the display it
helps having its COMM stand out, so change it from the default "perf" to
"perf-top-UI".

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-5w0hmlk3zfvysxvpsh763k9w@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf vendor events intel: Add Icelake V1.00 event file

Add a Intel event file for perf.

Signed-off-by: Haiyan Song <haiyanx.song@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/8859095e-5b02-d6b7-fbdc-3f42b714bae0@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix paths in include statements

These paths point to the wrong location but still work because they get
picked up by a -I flag that happens to direct to the correct file. Fix
paths to lead to the actual file location without help from include
flags.

Signed-off-by: Luke Mujica <lukemujica@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190719202253.220261-1-lukemujica@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test vfs_getname: Disable ~/.perfconfig to get default output

To get the expected output we have to ignore whatever changes the user
has in its ~/.perfconfig file, so set PERF_CONFIG to /dev/null to
achieve that.

Before:

  # egrep 'trace|show_' ~/.perfconfig
  [trace]
   show_zeros = yes
   show_duration = no
   show_timestamp = no
   show_arg_names = no
   show_prefix = yes
  # echo $PERF_CONFIG

  # perf test "trace + vfs_getname"
  70: Check open filename arg using perf trace + vfs_getname: FAILED!
  # export PERF_CONFIG=/dev/null
  # perf test "trace + vfs_getname"
  70: Check open filename arg using perf trace + vfs_getname: Ok
  #

After:

  # egrep 'trace|show_' ~/.perfconfig
  [trace]
   show_zeros = yes
   show_duration = no
   show_timestamp = no
   show_arg_names = no
   show_prefix = yes
  # echo $PERF_CONFIG

  # perf test "trace + vfs_getname"
  70: Check open filename arg using perf trace + vfs_getname: Ok
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: https://lkml.kernel.org/n/tip-3up27pexg5i3exuzqrvt4m8u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf config: Document the PERF_CONFIG environment variable

There was a provision for setting this variable, but not the
getenv("PERF_CONFIG") call to set it, as this was fixed in the previous
cset, document that it can be used to ask for using an alternative
.perfconfig file or to disable reading whatever file exists in the
system or home directory, i.e. using:

  export PERF_CONFIG=/dev/null

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: https://lkml.kernel.org/n/tip-0u4o967hsk7j0o50zp9ctn89@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf config: Honour $PERF_CONFIG env var to specify alternate .perfconfig

We had this comment in Documentation/perf_counter/config.c, i.e. since
when we got this from the git sources, but never really did that
getenv("PERF_CONFIG"), do it now as I need to disable whatever
~/.perfconfig root has so that tests parsing tool output are done for
the expected default output or that we specify an alternate config file
that when read will make the tools produce expected output.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Fixes: 078006012401 ("perf_counter tools: add in basic glue from Git")
Link: https://lkml.kernel.org/n/tip-jo209zac9rut0dz1rqvbdlgm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf session: Avoid infinite loop when seeing invalid header.size

Vince reported that when fuzzing the userland perf tool with a bogus
perf.data file he got into a infinite loop in 'perf report'.

Changing the return of fetch_mmaped_event() to ERR_PTR(-EINVAL) for that
case gets us out of that infinite loop.

Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726211415.GE24867@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge remote-tracking branch 'torvalds/master' into perf/core

To get closer to upstream and check if we need to sync more UAPI
headers, pick up fixes for libbpf that prevent perf's container tests
from completing successfuly, etc.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Linux 5.3-rc4

Merge tag 'dax-fixes-5.3-rc4' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull dax fixes from Dan Williams:
 "A filesystem-dax and device-dax fix for v5.3.

  The filesystem-dax fix is tagged for stable as the implementation has
  been mistakenly throwing away all cow pages on any truncate or hole
  punch operation as part of the solution to coordinate device-dma vs
  truncate to dax pages.

  The device-dax change fixes up a regression this cycle from the
  introduction of a common 'internal per-cpu-ref' implementation.

  Summary:

   - Fix dax_layout_busy_page() to not discard private cow pages of
     fs/dax private mappings.

   - Update the memremap_pages core to properly cleanup on behalf of
     internal reference-count users like device-dax"

* tag 'dax-fixes-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  mm/memremap: Fix reuse of pgmap instances with internal references
  dax: dax_layout_busy_page() should not unmap cow pages

Merge tag 'ntb-5.3-bugfixes' of git://github.com/jonmason/ntb

Pull NTB fix from Jon Mason:
 "Bug fix for NTB MSI kernel compile warning"

* tag 'ntb-5.3-bugfixes' of git://github.com/jonmason/ntb:
  NTB/msi: remove incorrect MODULE defines

Merge tag 'riscv/for-v5.3-rc4' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V updates from Paul Walmsley:
 "A few minor RISC-V updates for v5.3-rc4:

   - Remove __udivdi3() from the 32-bit Linux port, converting the only
     upstream user to use do_div(), per Linux policy

   - Convert the RISC-V standard clocksource away from per-cpu data
     structures, since only one is used by Linux, even on a multi-CPU
     system

   - A set of DT binding updates that remove an obsolete text binding in
     favor of a YAML binding, fix a bogus compatible string in the
     schema (thus fixing a "make dtbs_check" warning), and clarifies the
     future values expected in one of the RISC-V CPU properties"

* tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board
  dt-bindings: riscv: remove obsolete cpus.txt
  RISC-V: Remove udivdi3
  riscv: delay: use do_div() instead of __udivdi3()
  dt-bindings: Update the riscv,isa string description
  RISC-V: Remove per cpu clocksource

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A few fixes for x86:

   - Don't reset the carefully adjusted build flags for the purgatory
     and remove the unwanted flags instead. The 'reset all' approach led
     to build fails under certain circumstances.

   - Unbreak CLANG build of the purgatory by avoiding the builtin
     memcpy/memset implementations.

   - Address missing prototype warnings by including the proper header

   - Fix yet more fall-through issues"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/lib/cpu: Address missing prototypes warning
  x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS
  x86/purgatory: Do not use __builtin_memcpy and __builtin_memset
  x86: mtrr: cyrix: Mark expected switch fall-through
  x86/ptrace: Mark expected switch fall-through

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf tooling fixes from Thomas Gleixner:
 "Perf tooling fixes all over the place:

   - Fix the selection of the main thread COMM in db-export

   - Fix the disassemmbly display for BPF in annotate

   - Fix cpumap mask setup in perf ftrace when only one CPU is present

   - Add the missing 'cpu_clk_unhalted.core' event

   - Fix CPU 0 bindings in NUMA benchmarks

   - Fix the module size calculations for s390

   - Handle the gap between kernel end and module start on s390
     correctly

   - Build and typo fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf pmu-events: Fix missing "cpu_clk_unhalted.core" event
  perf annotate: Fix s390 gap between kernel end and module start
  perf record: Fix module size on s390
  perf tools: Fix include paths in ui directory
  perf tools: Fix a typo in a variable name in the Documentation Makefile
  perf cpumap: Fix writing to illegal memory in handling cpumap mask
  perf ftrace: Fix failure to set cpumask when only one cpu is present
  perf db-export: Fix thread__exec_comm()
  perf annotate: Fix printing of unaugmented disassembled instructions from BPF
  perf bench numa: Fix cpu0 binding

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Thomas Gleixner:
 "Three fixlets for the scheduler:

   - Avoid double bandwidth accounting in the push & pull code

   - Use a sane FIFO priority for the Pressure Stall Information (PSI)
     thread.

   - Avoid permission checks when setting the scheduler params for the
     PSI thread"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/psi: Do not require setsched permission from the trigger creator
  sched/psi: Reduce psimon FIFO priority
  sched/deadline: Fix double accounting of rq/running bw in push & pull

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Thomas Gleixner:
 "A small fix for the affinity spreading code.

  It failed to handle situations where a single vector was requested
  either due to only one CPU being available or vector exhaustion
  causing only a single interrupt to be granted.

  The fix is to simply remove the requirement in the affinity spreading
  code for more than one interrupt being available"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/affinity: Create affinity mask for single vector

Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull objtool warning fix from Thomas Gleixner:
 "The recent objtool fixes/enhancements unearthed a unbalanced CLAC in
  the i915 driver.

  Chris asked me to pick the fix up and route it through"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  drm/i915: Remove redundant user_access_end() from __copy_from_user() error path

Merge tag 'gfs2-v5.3-rc3.fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 fix from Andreas Gruenbacher:
 "Fix incorrect lseek / fiemap results"

* tag 'gfs2-v5.3-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: gfs2_walk_metadata fix

Makefile: Convert -Wimplicit-fallthrough=3 to just -Wimplicit-fallthrough for clang

A compilation -Wimplicit-fallthrough warning was enabled by commit
a035d552a93b ("Makefile: Globally enable fall-through warning")

Even though clang 10.0.0 does not currently support this warning without
a patch, clang currently does not support a value for this option.

Link: https://bugs.llvm.org/show_bug.cgi?id=39382
The gcc default for this warning is 3 so removing the =3 has no effect
for gcc and enables the warning for patched versions of clang.

Also remove the =3 from an existing use in a parisc Makefile:
arch/parisc/math-emu/Makefile

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'char-misc-5.3-rc4' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes Greg KH:
 "Here are some small char/misc driver fixes for 5.3-rc4.

  Two of these are for the habanalabs driver for issues found when
  running on a big-endian system (are they still alive?) The others are
  tiny fixes reported by people, and a MAINTAINERS update about the
  location of the fpga development tree.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  coresight: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute
  MAINTAINERS: Move linux-fpga tree to new location
  nvmem: Use the same permissions for eeprom as for nvmem
  habanalabs: fix host memory polling in BE architecture
  habanalabs: fix F/W download in BE architecture

Merge tag 'driver-core-5.3-rc4' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are two small fixes for some driver core issues that have been
  reported. There is also a kernfs "fix" here, which was then reverted
  because it was found to cause problems in linux-next.

  The driver core fixes both resolve reported issues, one with gpioint
  stuff that showed up in 5.3-rc1, and the other finally (and hopefully)
  resolves a very long standing race when removing glue directories.
  It's nice to get that issue finally resolved and the developers
  involved should be applauded for the persistence it took to get this
  patch finally accepted.

  All of these have been in linux-next for a while with no reported
  issues. Well, the one reported issue, hence the revert :)"

* tag 'driver-core-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Revert "kernfs: fix memleak in kernel_ops_readdir()"
  kernfs: fix memleak in kernel_ops_readdir()
  driver core: Fix use-after-free and double free on glue directory
  driver core: platform: return -ENXIO for missing GpioInt

Merge tag 'tty-5.3-rc4' of git://git./linux/kernel/git/gregkh/tty

Pull tty fix from Greg KH:
 "Here is a single tty kgdb fix for 5.3-rc4.

  It fixes an annoying log message that has caused kdb to become
  useless. It's another fallout from commit ddde3c18b700 ("vt: More
  locking checks") which tries to enforce locking checks more strictly
  in the tty layer, unfortunatly when kdb is stopped, there's no need
  for locks :)

  This patch has been linux-next for a while with no reported issues"

* tag 'tty-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  kgdboc: disable the console lock when in kgdb

Merge tag 'staging-5.3-rc4' of git://git./linux/kernel/git/gregkh/staging

Pull staging / IIO driver fixes from Greg KH:
 "Here are some small staging and IIO driver fixes for 5.3-rc4.

  Nothing major, just resolutions for a number of small reported issues,
  full details in the shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'staging-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: adc: gyroadc: fix uninitialized return code
  docs: generic-counter.rst: fix broken references for ABI file
  staging: android: ion: Bail out upon SIGKILL when allocating memory.
  Staging: fbtft: Fix GPIO handling
  staging: unisys: visornic: Update the description of 'poll_for_irq()'
  staging: wilc1000: flush the workqueue before deinit the host
  staging: gasket: apex: fix copy-paste typo
  Staging: fbtft: Fix reset assertion when using gpio descriptor
  Staging: fbtft: Fix probing of gpio descriptor
  iio: imu: mpu6050: add missing available scan masks
  iio: cros_ec_accel_legacy: Fix incorrect channel setting
  IIO: Ingenic JZ47xx: Set clock divider on probe
  iio: adc: max9611: Fix misuse of GENMASK macro

Merge tag 'usb-5.3-rc4' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.3-rc4.

  The "biggest" one here is moving code from one file to another in
  order to fix a long-standing race condition with the creation of sysfs
  files for USB devices. Turns out that there are now userspace tools
  out there that are hitting this long-known bug, so it's time to fix
  them. Thankfully the tool-maker in this case fixed the issue :)

  The other patches in here are all fixes for reported issues. Now that
  syzbot knows how to fuzz USB drivers better, and is starting to now
  fuzz the userspace facing side of them at the same time, there will be
  more and more small fixes like these coming, which is a good thing.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: setup authorized_default attributes using usb_bus_notify
  usb: iowarrior: fix deadlock on disconnect
  Revert "USB: rio500: simplify locking"
  usb: usbfs: fix double-free of usb memory upon submiturb error
  usb: yurex: Fix use-after-free in yurex_delete
  usb: typec: tcpm: Ignore unsupported/unknown alternate mode requests
  xhci: Fix NULL pointer dereference at endpoint zero reset.
  usb: host: xhci-rcar: Fix timeout in xhci_suspend()
  usb: typec: ucsi: ccg: Fix uninitilized symbol error
  usb: typec: tcpm: remove tcpm dir if no children
  usb: typec: tcpm: free log buf memory when remove debug file
  usb: typec: tcpm: Add NULL check before dereferencing config

Merge tag 'pinctrl-v5.3-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

 - Delay acquisition of regmaps in the Aspeed G5 driver.

 - Make a symbol static to reduce compiler noise.

* tag 'pinctrl-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: aspeed: Make aspeed_pinmux_ips static
  pinctrl: aspeed-g5: Delay acquisition of regmaps

Merge tag 'powerpc-5.3-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fix from Michael Ellerman:
 "Just one fix, a revert of a commit that was meant to be a minor
  improvement to some inline asm, but ended up having no real benefit
  with GCC and broke booting 32-bit machines when using Clang.

  Thanks to: Arnd Bergmann, Christophe Leroy, Nathan Chancellor, Nick
  Desaulniers, Segher Boessenkool"

* tag 'powerpc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  Revert "powerpc: slightly improve cache helpers"

Merge tag 'Wimplicit-fallthrough-5.3-rc4' of git://git./linux/kernel/git/gustavoars/linux

Pull fall-through fixes from Gustavo A. R. Silva:
 "Mark more switch cases where we are expecting to fall through, fixing
  fall-through warnings in arm, sparc64, mips, i386 and s390"

* tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  ARM: ep93xx: Mark expected switch fall-through
  scsi: fas216: Mark expected switch fall-throughs
  pcmcia: db1xxx_ss: Mark expected switch fall-throughs
  video: fbdev: omapfb_main: Mark expected switch fall-throughs
  watchdog: riowd: Mark expected switch fall-through
  s390/net: Mark expected switch fall-throughs
  crypto: ux500/crypt: Mark expected switch fall-throughs
  watchdog: wdt977: Mark expected switch fall-through
  watchdog: scx200_wdt: Mark expected switch fall-through
  watchdog: Mark expected switch fall-throughs
  ARM: signal: Mark expected switch fall-through
  mfd: omap-usb-host: Mark expected switch fall-throughs
  mfd: db8500-prcmu: Mark expected switch fall-throughs
  ARM: OMAP: dma: Mark expected switch fall-throughs
  ARM: alignment: Mark expected switch fall-throughs
  ARM: tegra: Mark expected switch fall-through
  ARM/hw_breakpoint: Mark expected switch fall-throughs

Merge tag 'kbuild-fixes-v5.3-3' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - revive single target %.ko

 - do not create built-in.a where it is unneeded

 - do not create modules.order where it is unneeded

 - show a warning if subdir-y/m is used to visit a module Makefile

* tag 'kbuild-fixes-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: show hint if subdir-y/m is used to visit module Makefile
  kbuild: generate modules.order only in directories visited by obj-y/m
  kbuild: fix false-positive need-builtin calculation
  kbuild: revive single target %.ko

ARM: ep93xx: Mark expected switch fall-through

Mark switch cases where we are expecting to fall through.

Fix the following warnings (Building: arm-ep93xx_defconfig arm):

arch/arm/mach-ep93xx/crunch.c: In function 'crunch_do':
arch/arm/mach-ep93xx/crunch.c:46:3: warning: this statement may
fall through [-Wimplicit-fallthrough=]
      memset(crunch_state, 0, sizeof(*crunch_state));
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   arch/arm/mach-ep93xx/crunch.c:53:2: note: here
     case THREAD_NOTIFY_EXIT:
     ^~~~

Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

scsi: fas216: Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

Fix the following warnings (Building: rpc_defconfig arm):

drivers/scsi/arm/fas216.c: In function ‘fas216_disconnect_intr’:
drivers/scsi/arm/fas216.c:913:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) {
      ^
drivers/scsi/arm/fas216.c:919:2: note: here
  default:    /* huh?     */
  ^~~~~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_kick’:
drivers/scsi/arm/fas216.c:1959:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   fas216_allocate_tag(info, SCpnt);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1960:2: note: here
  case TYPE_OTHER:
  ^~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_busservice_intr’:
drivers/scsi/arm/fas216.c:1413:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   fas216_stoptransfer(info);
   ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1414:2: note: here
  case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status       */
  ^~~~
drivers/scsi/arm/fas216.c:1424:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   fas216_stoptransfer(info);
   ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1425:2: note: here
  case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */
  ^~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_funcdone_intr’:
drivers/scsi/arm/fas216.c:1573:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if ((stat & STAT_BUSMASK) == STAT_MESGIN) {
      ^
drivers/scsi/arm/fas216.c:1579:2: note: here
  default:
  ^~~~~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_handlesync’:
drivers/scsi/arm/fas216.c:605:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
   info->scsi.phase = PHASE_MSGOUT_EXPECT;
   ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:607:2: note: here
  case async:
  ^~~~

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

pcmcia: db1xxx_ss: Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings (Building: db1xxx_defconfig mips):

drivers/pcmcia/db1xxx_ss.c:257:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/pcmcia/db1xxx_ss.c:269:3: warning: this statement may fall through [-Wimplicit-fallthrough=]

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

video: fbdev: omapfb_main: Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: omap1_defconfig arm):

drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/watchdog/ar7_wdt.c:237:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:449:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1549:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1547:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1545:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1543:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1540:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1538:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1535:3: warning: this statement may fall through [-Wimplicit-fallthrough=]

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

watchdog: riowd: Mark expected switch fall-through

Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings (Building: sparc64):

drivers/watchdog/riowd.c: In function ‘riowd_ioctl’:
drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   riowd_writereg(p, riowd_timeout, WDTO_INDEX);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/watchdog/riowd.c:139:2: note: here
  case WDIOC_GETTIMEOUT:
  ^~~~

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

s390/net: Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings (Building: s390):

drivers/s390/net/ctcm_fsms.c: In function ‘ctcmpc_chx_attnbusy’:
drivers/s390/net/ctcm_fsms.c:1703:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (grp->changed_side == 1) {
      ^
drivers/s390/net/ctcm_fsms.c:1707:2: note: here
  case MPCG_STATE_XID0IOWAIX:
  ^~~~

drivers/s390/net/ctcm_mpc.c: In function ‘ctc_mpc_alloc_channel’:
drivers/s390/net/ctcm_mpc.c:358:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (callback)
      ^
drivers/s390/net/ctcm_mpc.c:360:2: note: here
  case MPCG_STATE_XID0IOWAIT:
  ^~~~

drivers/s390/net/ctcm_mpc.c: In function ‘mpc_action_timeout’:
drivers/s390/net/ctcm_mpc.c:1469:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if ((fsm_getstate(rch->fsm) == CH_XID0_PENDING) &&
      ^
drivers/s390/net/ctcm_mpc.c:1472:2: note: here
  default:
  ^~~~~~~
drivers/s390/net/ctcm_mpc.c: In function ‘mpc_send_qllc_discontact’:
drivers/s390/net/ctcm_mpc.c:2087:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (grp->estconnfunc) {
      ^
drivers/s390/net/ctcm_mpc.c:2092:2: note: here
  case MPCG_STATE_FLOWC:
  ^~~~

drivers/s390/net/qeth_l2_main.c: In function ‘qeth_l2_process_inbound_buffer’:
drivers/s390/net/qeth_l2_main.c:328:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
    if (IS_OSN(card)) {
       ^
drivers/s390/net/qeth_l2_main.c:337:3: note: here
   default:
   ^~~~~~~

Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

crypto: ux500/crypt: Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: arm):

drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_save_device_context’:
drivers/crypto/ux500/cryp/cryp.c:316:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
   ctx->key_4_r = readl_relaxed(&src_reg->key_4_r);
drivers/crypto/ux500/cryp/cryp.c:318:2: note: here
  case CRYP_KEY_SIZE_192:
  ^~~~
drivers/crypto/ux500/cryp/cryp.c:320:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
   ctx->key_3_r = readl_relaxed(&src_reg->key_3_r);
drivers/crypto/ux500/cryp/cryp.c:322:2: note: here
  case CRYP_KEY_SIZE_128:
  ^~~~
drivers/crypto/ux500/cryp/cryp.c:324:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
   ctx->key_2_r = readl_relaxed(&src_reg->key_2_r);
drivers/crypto/ux500/cryp/cryp.c:326:2: note: here
  default:
  ^~~~~~~
In file included from ./include/linux/io.h:13:0,
                 from drivers/crypto/ux500/cryp/cryp_p.h:14,
                 from drivers/crypto/ux500/cryp/cryp.c:15:
drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_restore_device_context’:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
 #define __raw_writel __raw_writel
                      ^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
 #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
                             ^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:363:3: note: in expansion of macro ‘writel_relaxed’
   writel_relaxed(ctx->key_4_r, &reg->key_4_r);
   ^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:365:2: note: here
  case CRYP_KEY_SIZE_192:
  ^~~~
In file included from ./include/linux/io.h:13:0,
                 from drivers/crypto/ux500/cryp/cryp_p.h:14,
                 from drivers/crypto/ux500/cryp/cryp.c:15:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
 #define __raw_writel __raw_writel
                      ^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
 #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
                             ^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:367:3: note: in expansion of macro ‘writel_relaxed’
   writel_relaxed(ctx->key_3_r, &reg->key_3_r);
   ^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:369:2: note: here
  case CRYP_KEY_SIZE_128:
  ^~~~
In file included from ./include/linux/io.h:13:0,
                 from drivers/crypto/ux500/cryp/cryp_p.h:14,
                 from drivers/crypto/ux500/cryp/cryp.c:15:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
 #define __raw_writel __raw_writel
                      ^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
 #define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
                             ^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:371:3: note: in expansion of macro ‘writel_relaxed’
   writel_relaxed(ctx->key_2_r, &reg->key_2_r);
   ^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:373:2: note: here
  default:
  ^~~~~~~

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

watchdog: wdt977: Mark expected switch fall-through

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: arm):

drivers/watchdog/wdt977.c: In function ‘wdt977_ioctl’:
  LD [M]  drivers/media/platform/vicodec/vicodec.o
drivers/watchdog/wdt977.c:400:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   wdt977_keepalive();
   ^~~~~~~~~~~~~~~~~~
drivers/watchdog/wdt977.c:403:2: note: here
  case WDIOC_GETTIMEOUT:
  ^~~~

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

watchdog: scx200_wdt: Mark expected switch fall-through

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: i386):

drivers/watchdog/scx200_wdt.c: In function ‘scx200_wdt_ioctl’:
drivers/watchdog/scx200_wdt.c:188:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   scx200_wdt_ping();
   ^~~~~~~~~~~~~~~~~
drivers/watchdog/scx200_wdt.c:189:2: note: here
  case WDIOC_GETTIMEOUT:
  ^~~~

Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

watchdog: Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings:

drivers/watchdog/ar7_wdt.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]:  => 237:3
drivers/watchdog/pcwd.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]:  => 653:3
drivers/watchdog/sb_wdog.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]:  => 204:3
drivers/watchdog/wdt.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]:  => 391:3

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

ARM: signal: Mark expected switch fall-through

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning:

arch/arm/kernel/signal.c: In function 'do_signal':
arch/arm/kernel/signal.c:598:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
    restart -= 2;
    ~~~~~~~~^~~~
arch/arm/kernel/signal.c:599:3: note: here
   case -ERESTARTNOHAND:
   ^~~~

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

mfd: omap-usb-host: Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings:

drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_resume':
drivers/mfd/omap-usb-host.c:303:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
    if (!IS_ERR(omap->hsic480m_clk[i])) {
       ^
drivers/mfd/omap-usb-host.c:313:3: note: here
   case OMAP_EHCI_PORT_MODE_TLL:
   ^~~~
drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_suspend':
drivers/mfd/omap-usb-host.c:345:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
    if (!IS_ERR(omap->hsic480m_clk[i]))
       ^
drivers/mfd/omap-usb-host.c:349:3: note: here
   case OMAP_EHCI_PORT_MODE_TLL:
   ^~~~

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

mfd: db8500-prcmu: Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings:

drivers/mfd/db8500-prcmu.c: In function 'dsiclk_rate':
drivers/mfd/db8500-prcmu.c:1592:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
   div *= 2;
   ~~~~^~~~
drivers/mfd/db8500-prcmu.c:1593:2: note: here
  case PRCM_DSI_PLLOUT_SEL_PHI_2:
  ^~~~
drivers/mfd/db8500-prcmu.c:1594:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
   div *= 2;
   ~~~~^~~~
drivers/mfd/db8500-prcmu.c:1595:2: note: here
  case PRCM_DSI_PLLOUT_SEL_PHI:
  ^~~~

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

ARM: OMAP: dma: Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings:

arch/arm/plat-omap/dma.c: In function 'omap_set_dma_src_burst_mode':
arch/arm/plat-omap/dma.c:384:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (dma_omap2plus()) {
      ^
arch/arm/plat-omap/dma.c:393:2: note: here
  case OMAP_DMA_DATA_BURST_16:
  ^~~~
arch/arm/plat-omap/dma.c:394:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (dma_omap2plus()) {
      ^
arch/arm/plat-omap/dma.c:402:2: note: here
  default:
  ^~~~~~~
arch/arm/plat-omap/dma.c: In function 'omap_set_dma_dest_burst_mode':
arch/arm/plat-omap/dma.c:473:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (dma_omap2plus()) {
      ^
arch/arm/plat-omap/dma.c:481:2: note: here
  default:
  ^~~~~~~

Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

ARM: alignment: Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings:

arch/arm/mm/alignment.c: In function 'thumb2arm':
arch/arm/mm/alignment.c:688:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if ((tinstr & (3 << 9)) == 0x0400) {
      ^
arch/arm/mm/alignment.c:700:2: note: here
  default:
  ^~~~~~~
arch/arm/mm/alignment.c: In function 'do_alignment_t32_to_handler':
arch/arm/mm/alignment.c:753:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
   poffset->un = (tinst2 & 0xff) << 2;
   ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
arch/arm/mm/alignment.c:754:2: note: here
  case 0xe940:
  ^~~~

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

ARM: tegra: Mark expected switch fall-through

Mark switch cases where we are expecting to fall through.

This patch fixes the following warning:

arch/arm/mach-tegra/reset.c: In function 'tegra_cpu_reset_handler_enable':
arch/arm/mach-tegra/reset.c:72:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   tegra_cpu_reset_handler_set(reset_address);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-tegra/reset.c:74:2: note: here
  case 0:
  ^~~~

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

ARM/hw_breakpoint: Mark expected switch fall-throughs

Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings:

arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_arch_parse':
arch/arm/kernel/hw_breakpoint.c:609:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2)
      ^
arch/arm/kernel/hw_breakpoint.c:611:2: note: here
  case 3:
  ^~~~
arch/arm/kernel/hw_breakpoint.c:613:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1)
      ^
arch/arm/kernel/hw_breakpoint.c:615:2: note: here
  default:
  ^~~~~~~
arch/arm/kernel/hw_breakpoint.c: In function 'arch_build_bp_info':
arch/arm/kernel/hw_breakpoint.c:544:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if ((hw->ctrl.type != ARM_BREAKPOINT_EXECUTE)
      ^
arch/arm/kernel/hw_breakpoint.c:547:2: note: here
  default:
  ^~~~~~~
In file included from include/linux/kernel.h:11,
                 from include/linux/list.h:9,
                 from include/linux/preempt.h:11,
                 from include/linux/hardirq.h:5,
                 from arch/arm/kernel/hw_breakpoint.c:16:
arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_pending':
include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
 # define unlikely(x) __builtin_expect(!!(x), 0)
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/bug.h:136:2: note: in expansion of macro 'unlikely'
  unlikely(__ret_warn_on);     \
  ^~~~~~~~
arch/arm/kernel/hw_breakpoint.c:863:3: note: in expansion of macro 'WARN'
   WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
   ^~~~
arch/arm/kernel/hw_breakpoint.c:864:2: note: here
  case ARM_ENTRY_SYNC_WATCHPOINT:
  ^~~~
arch/arm/kernel/hw_breakpoint.c: In function 'core_has_os_save_restore':
arch/arm/kernel/hw_breakpoint.c:910:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (oslsr & ARM_OSLSR_OSLM0)
      ^
arch/arm/kernel/hw_breakpoint.c:912:2: note: here
  default:
  ^~~~~~~

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "Bugfixes (arm and x86) and cleanups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  selftests: kvm: Adding config fragments
  KVM: selftests: Update gitignore file for latest changes
  kvm: remove unnecessary PageReserved check
  KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable
  KVM: arm: Don't write junk to CP15 registers on reset
  KVM: arm64: Don't write junk to sysregs on reset
  KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block
  x86: kvm: remove useless calls to kvm_para_available
  KVM: no need to check return value of debugfs_create functions
  KVM: remove kvm_arch_has_vcpu_debugfs()
  KVM: Fix leak vCPU's VMCS value into other pCPU
  KVM: Check preempted_in_kernel for involuntary preemption
  KVM: LAPIC: Don't need to wakeup vCPU twice afer timer fire
  arm64: KVM: hyp: debug-sr: Mark expected switch fall-through
  KVM: arm64: Update kvm_arm_exception_class and esr_class_str for new EC
  KVM: arm: vgic-v3: Mark expected switch fall-through
  arm64: KVM: regmap: Fix unexpected switch fall-through
  KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - newer systems with Elan touchpads will be switched over to SMBus

 - HP Spectre X360 will be using SMbus/RMI4

 - checks for invalid USB descriptors in kbtab and iforce

 - build fixes for applespi driver (misconfigs)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: iforce - add sanity checks
  Input: applespi - use struct_size() helper
  Input: kbtab - sanity check for endpoint type
  Input: usbtouchscreen - initialize PM mutex before using it
  Input: applespi - add dependency on LEDS_CLASS
  Input: synaptics - enable RMI mode for HP Spectre X360
  Input: elantech - annotate fall-through case in elantech_use_host_notify()
  Input: elantech - enable SMBus on new (2018+) systems
  Input: applespi - fix trivial typo in struct description
  Input: applespi - select CRC16 module
  Input: applespi - fix warnings detected by sparse

mm/memremap: Fix reuse of pgmap instances with internal references

Currently, attempts to shutdown and re-enable a device-dax instance
trigger:

    Missing reference count teardown definition
    WARNING: CPU: 37 PID: 1608 at mm/memremap.c:211 devm_memremap_pages+0x234/0x850
    [..]
    RIP: 0010:devm_memremap_pages+0x234/0x850
    [..]
    Call Trace:
     dev_dax_probe+0x66/0x190 [device_dax]
     really_probe+0xef/0x390
     driver_probe_device+0xb4/0x100
     device_driver_attach+0x4f/0x60

Given that the setup path initializes pgmap->ref, arrange for it to be
also torn down so devm_memremap_pages() is ready to be called again and
not be mistaken for the 3rd-party per-cpu-ref case.

Fixes: 24917f6b1041 ("memremap: provide an optional internal refcount in struct dev_pagemap")
Reported-by: Fan Du <fan.du@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/156530042781.2068700.8733813683117819799.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

drm/i915: Remove redundant user_access_end() from __copy_from_user() error path

Objtool reports:

  drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0x36: redundant UACCESS disable

__copy_from_user() already does both STAC and CLAC, so the
user_access_end() in its error path adds an extra unnecessary CLAC.

Fixes: 0b2c8f8b6b0c ("i915: fix missing user_access_end() in page fault exception case")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://github.com/ClangBuiltLinux/linux/issues/617
Link: https://lkml.kernel.org/r/51a4155c5bc2ca847a9cbe85c1c11918bb193141.1564086017.git.jpoimboe@redhat.com

kbuild: show hint if subdir-y/m is used to visit module Makefile

Since commit ff9b45c55b26 ("kbuild: modpost: read modules.order instead
of $(MODVERDIR)/*.mod"), a module is no longer built in the following
pattern:

  [Makefile]
  subdir-y := some-module

  [some-module/Makefile]
  obj-m := some-module.o

You cannot write Makefile this way in upstream because modules.order is
not correctly generated. subdir-y is used to descend to a sub-directory
that builds tools, device trees, etc.

For external modules, the modules order does not matter. So, the
Makefile above was known to work.

I believe the Makefile should be re-written as follows:

  [Makefile]
  obj-m := some-module/

  [some-module/Makefile]
  obj-m := some-module.o

However, people will have no idea if their Makefile suddenly stops
working. In fact, I received questions from multiple people.

Show a warning for a while if obj-m is specified in a Makefile visited
by subdir-y or subdir-m.

I touched the %/ rule to avoid false-positive warnings for the single
target.

Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Tom Stonecypher <thomas.edwardx.stonecypher@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>

kbuild: generate modules.order only in directories visited by obj-y/m

The modules.order files in directories visited by the chain of obj-y
or obj-m are merged to the upper-level ones, and become parts of the
top-level modules.order. On the other hand, there is no need to
generate modules.order in directories visited by subdir-y or subdir-m
since they would become orphan anyway.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

kbuild: fix false-positive need-builtin calculation

The current implementation of need-builtin is false-positive,
for example, in the following Makefile:

  obj-m := foo/
  obj-y := foo/bar/

..., where foo/built-in.a is not required.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

kbuild: revive single target %.ko

I removed the single target %.ko in commit ff9b45c55b26 ("kbuild:
modpost: read modules.order instead of $(MODVERDIR)/*.mod") because
the modpost stage does not work reliably. For instance, the module
dependency, modversion, etc. do not work if we lack symbol information
from the other modules.

Yet, some people still want to build only one module in their interest,
and it may be still useful if it is used within those limitations.

Fixes: ff9b45c55b26 ("kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod")
Reported-by: Don Brace <don.brace@microsemi.com>
Reported-by: Arend Van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Merge tag 'drm-fixes-2019-08-09' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Usual fixes roundup. Nothing too crazy or serious, one non-released
  ioctl is removed in the amdkfd driver.

  core:
   - mode parser strncpy fix

  i915:
   - GLK DSI escape clock setting
   - HDCP memleak fix

  tegra:
   - one gpiod/of regression fix

  amdgpu:
   - fix VCN to handle the latest navi10 firmware
   - fix for fan control on navi10
   - properly handle SMU metrics table on navi10
   - fix a resume regression on Stoney
   - kfd revert a GWS ioctl

  vmwgfx:
   - memory leak fix

  rockchip:
   - suspend fix"

* tag 'drm-fixes-2019-08-09' of git://anongit.freedesktop.org/drm/drm:
  drm/vmwgfx: fix memory leak when too many retries have occurred
  Revert "drm/amdkfd: New IOCTL to allocate queue GWS"
  Revert "drm/amdgpu: fix transform feedback GDS hang on gfx10 (v2)"
  drm/amdgpu: pin the csb buffer on hw init for gfx v8
  drm/rockchip: Suspend DP late
  drm/i915: Fix wrong escape clock divisor init for GLK
  drm/i915: fix possible memory leak in intel_hdcp_auth_downstream()
  drm/modes: Fix unterminated strncpy
  drm/amd/powerplay: correct navi10 vcn powergate
  drm/amd/powerplay: honor hw limit on fetching metrics data for navi10
  drm/amd/powerplay: Allow changing of fan_control in smu_v11_0
  drm/amd/amdgpu/vcn_v2_0: Move VCN 2.0 specific dec ring test to vcn_v2_0
  drm/amd/amdgpu/vcn_v2_0: Mark RB commands as KMD commands
  drm/tegra: Fix gpiod_get_from_of_node() regression

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fix from Catalin Marinas:
 "Fix bad_pte warning caused by pte_mkdevmap() not setting PTE_SPECIAL"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: add missing PTE_SPECIAL in pte_mkdevmap on arm64

Merge tag 's390-5.3-5' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

 - Map vdso also for statically linked binaries like all other
   architectures.

 - Fix no .bss usage compile-time check to account common objects with
   the help of binutils size tool. Top level Makefile change acked-by
   Masahiro.

 - A fix to make perf happy with _etext symbol type.

 - Fix dump_pagetables which is broken since p*d_offset implementation
   change to comply with mm/gup.c expectations.

 - Revert memory sharing for diag calls in protected virtualization,
   since this is not required after all.

 - Couple of other minor code cleanups.

* tag 's390-5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/vdso: map vdso also for statically linked binaries
  s390/build: use size command to perform empty .bss check
  kbuild: add OBJSIZE variable for the size tool
  s390: put _stext and _etext into .text section
  s390/head64: cleanup unused labels
  s390/unwind: remove stack recursion warning
  s390/setup: adjust start_code of init_mm to _text
  s390/mm: fix dump_pagetables top level page table walking
  s390/protvirt: avoid memory sharing for diag 308 set/store

Merge tag 'for-linus-20190809' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - Revert of a bcache patch that caused an oops for some (Coly)

 - ata rb532 unused warning fix (Gustavo)

 - AoE kernel crash fix (He)

 - Error handling fixup for blkdev_get() (Jan)

 - libata read/write translation and SFF PIO fix (me)

 - Use after free and error handling fix for O_DIRECT fragments. There's
   still a nowait + sync oddity in there, we'll nail that start next
   week. If all else fails, I'll queue a revert of the NOWAIT change.
   (me)

 - Loop GFP_KERNEL -> GFP_NOIO deadlock fix (Mikulas)

 - Two BFQ regression fixes that caused crashes (Paolo)

* tag 'for-linus-20190809' of git://git.kernel.dk/linux-block:
  bcache: Revert "bcache: use sysfs_match_string() instead of __sysfs_match_string()"
  loop: set PF_MEMALLOC_NOIO for the worker thread
  bdev: Fixup error handling in blkdev_get()
  block, bfq: handle NULL return value by bfq_init_rq()
  block, bfq: move update of waker and woken list to queue freeing
  block, bfq: reset last_completed_rq_bfqq if the pointed queue is freed
  block: aoe: Fix kernel crash due to atomic sleep when exiting
  libata: add SG safety checks in SFF pio transfers
  libata: have ata_scsi_rw_xlat() fail invalid passthrough requests
  block: fix O_DIRECT error handling for bio fragments
  ata: rb532_cf: Fix unused variable warning in rb532_pata_driver_probe

Merge tag 'mmc-v5.3-rc3' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:

 - cavium: Fix DMA support

 - sdhci-sprd: Fix soft reset when runtime resuming"

* tag 'mmc-v5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: cavium: Add the missing dma unmap when the dma has finished.
  mmc: cavium: Set the correct dma max segment size for mmc_host
  mmc: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming

Merge tag 'fbdev-v5.3-rc4' of git://github.com/bzolnier/linux

Pull fbdev fix from Bartlomiej Zolnierkiewicz:
 "fbdev patches will now go to upstream through drm-misc tree for
  improved maintainership and better integration testing so update
  MAINTAINERS file accordingly"

* tag 'fbdev-v5.3-rc4' of git://github.com/bzolnier/linux:
  MAINTAINERS: handle fbdev changes through drm-misc tree

Merge tag 'pwm/for-5.3-rc4' of git://git./linux/kernel/git/thierry.reding/linux-pwm

Pull pwm fix from Thierry Reding:
 "A single fix for a backlight brightness regression introduced in
  this merge window"

* tag 'pwm/for-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Fallback to the static lookup-list when acpi_pwm_get fails