drm/mcde: Reuse global DSI command defs

The MCDE DSI include file redefines some commands that
already exist in the common <video/mipi_display.h> header.

Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191122072457.25619-1-linus.walleij@linaro.org

drm/mediatek: don't open-code drm_gem_fb_create

Aside: There's a few other fb_create implementations which
simply check for valid buffer format (or an approximation thereof),
and then call drm_gem_fb_create. For atomic drivers at least we could
walk all planes and make sure the format/modifier combo is valid,
and remove even more code.

For non-atomic drivers that's not possible, since the format list for
the primary buffer might be garbage (and most likely it is).

Also delete mtk_drm_fb.[hc] since it would now only contain one
function.

Acked-by: CK Hu <ck.hu@mediatek.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115092120.4445-4-daniel.vetter@ffwll.ch

drm/msm: Don't init ww_mutec acquire ctx before needed

For locking semantics it really doesn't matter when we grab the
ticket. But for lockdep validation it does: the acquire ctx is a fake
lockdep. Since other drivers might want to do a full multi-lock dance
in their fault-handler, not just lock a single dma_resv. Therefore we
must init the acquire_ctx only after we've done all the copy_*_user or
anything else that might trigger a pagefault. For msm this means we
need to move it past submit_lookup_objects.

Aside: Why is msm still using struct_mutex, it seems to be using
dma_resv_lock for general buffer state protection?

v2:
- Add comment to explain why the ww ticket setup is separate (Rob)
- Fix up error handling, we need to make sure we don't call
  ww_acquire_fini without _init.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-and-tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191120105607.3023-1-daniel.vetter@ffwll.ch

dma-resv: Also prime acquire ctx for lockdep

Semnatically it really doesn't matter where we grab the ticket. But
since the ticket is a fake lockdep lock, it matters for lockdep
validation purposes.

This means stuff like grabbing a ticket and then doing
copy_from/to_user isn't allowed anymore. This is a changed compared to
the current ttm fault handler, which doesn't bother with having a full
reservation. Since I'm looking into fixing the TODO entry in
ttm_mem_evict_wait_busy() I think that'll have to change sooner or
later anyway, better get started. A bit more context on why I'm
looking into this: For backwards compat with existing i915 gem code I
think we'll have to do full slowpath locking in the i915 equivalent of
the eviction code. And with dynamic dma-buf that will leak across
drivers, so another thing we need to standardize and make sure it's
done the same way everyway.

Unfortunately this means another full audit of all drivers:

- gem helpers: acquire_init is done right before taking locks, so no
  problem. Same for acquire_fini and unlocking, which means nothing
  that's not already covered by the dma_resv_lock rules will be caught
  with this extension here to the acquire_ctx.

- etnaviv: An absolute massive amount of code is run between the
  acquire_init and the first lock acquisition in submit_lock_objects.
  But nothing that would touch user memory and could cause a fault.
  Furthermore nothing that uses the ticket, so even if I missed
  something, it would be easy to fix by pushing the acquire_init right
  before the first use. Similar on the unlock/acquire_fini side.

- i915: Right now (and this will likely change a lot rsn) the acquire
  ctx and actual locks are right next to each another. No problem.

- msm has a problem: submit_create calls acquire_init, but then
  submit_lookup_objects() has a bunch of copy_from_user to do the
  object lookups. That's the only thing before submit_lock_objects
  call dma_resv_lock(). Despite all the copypasta to etnaviv, etnaviv
  does not have this issue since it copies all the userspace structs
  earlier. submit_cleanup does not have any such issues.

  With the prep patch to pull out the acquire_ctx and reorder it msm
  is going to be safe too.

- nouveau: acquire_init is right next to ttm_bo_reserve, so all good.
  Similar on the acquire_fini/ttm_bo_unreserve side.

- ttm execbuf utils: acquire context and locking are even in the same
  functions here (one function to reserve everything, the other to
  unreserve), so all good.

- vc4: Another case where acquire context and locking are handled in
  the same functions (one function to lock everything, the other to
  unlock).

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: Huang Rui <ray.huang@amd.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119210844.16947-3-daniel.vetter@ffwll.ch

drm/modeset: Prime modeset lock vs dma_resv

It's kinda really hard to get this wrong on a driver with both display
and dma_resv locking. But who ever knows, so better to make sure that
really all drivers nest these the same way.

For actual lock semantics the acquire context nesting doesn't matter.
But to teach lockdep what's going on with ww_mutex the acquire ctx is
a fake lockdep lock, hence from a lockdep pov it does matter. That's
why I figured better to include it.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119210844.16947-2-daniel.vetter@ffwll.ch

MAINTAINERS: Remove myself from drm-misc entry

Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115205302.246625-1-sean@poorly.run

drm/dp_mst: fix multiple frees of tx->bytes

Currently tx->bytes is being freed r->num_transactions number of
times because tx is not being set correctly. Fix this by setting
tx to &r->transactions[i] so that the correct objects are being
freed on each loop iteration.

Addresses-Coverity: ("Double free")
Fixes: 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing + selftests")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120173509.347490-1-colin.king@canonical.com

drm/mgag200: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120133625.11478-1-krzk@kernel.org

drm/bridge: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120133634.11601-1-krzk@kernel.org

drm/lima: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120133629.11543-1-krzk@kernel.org

drm/nouveau: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120133619.11415-1-krzk@kernel.org

drm/omap: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120133615.11329-1-krzk@kernel.org

drm/rockchip: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120133348.6640-1-krzk@kernel.org

drm/udl: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120133341.6582-1-krzk@kernel.org

vga: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120133327.6519-1-krzk@kernel.org

Merge tag 'topic/drm-mipi-dsi-dsc-updates-2019-11-11' of ssh://git.freedesktop.org/git/drm-intel into drm-misc-next

Core Changes:
- Update DSI data type and command definitions
- Add helpers for sending compression mode and PPS packets

Driver Changes:
- Update tiny/st7586 to reflect a definition change

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87tv7a4eq3.fsf@intel.com

dma_resv: prime lockdep annotations

From d07ea81611ed6e4fb8cc290f42d23dbcca2da2f8 Mon Sep 17 00:00:00 2001
From: Steven Price <steven.price@arm.com>
Date: Mon, 11 Nov 2019 13:07:19 +0000
Subject: [PATCH] dma_resv: Correct return type of dma_resv_lockdep()

subsys_initcall() expects a function which returns 'int'. Fix
dma_resv_lockdep() so it returns an 'int' error code.

Fixes: b2a8116e2592 ("dma_resv: prime lockdep annotations")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c0a0c70d-e6fe-1103-2888-1ce1425f4a5d@arm.com

drm/r128: make ATI PCI GART part of its only user, r128

The ATI Rage 128 driver has been the only user of ATI PCI GART code
since Radeon dropped UMS support in commit 8333f607a631 ("drm/radeon:
remove UMS support"). Clean up the drm top level directory, Kconfig and
Makefile by making ati_pcigart.[ch] part of r128. Drop the
CONFIG_DRM_ATI_PCIGART config option made redundant by the change.

This reduces drm.ko module size slightly when legacy drivers are
enabled, and moves the baggage to r128.ko instead.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119100536.12024-1-jani.nikula@intel.com

drm/virtio: factor out virtio_gpu_update_dumb_bo

No functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20191023062539.11728-4-kraxel@redhat.com

drm/virtio: Simplify virtio_gpu_primary_plane_update workflow.

Return early for the no framebuffer (or disabled output) case.
Results in a simpler code flow for the remaining cases.
No functional change.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20191023062539.11728-3-kraxel@redhat.com

drm/virtio: fix byteorder handling in virtio_gpu_cmd_transfer_{from, to}_host_3d functions

Be consistent with the rest of the code base.
No functional change.

v2:
 - fix sparse warnings for virtio_gpu_cmd_transfer_to_host_2d call.
 - move convert_to_hw_box helper function.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20191023062539.11728-2-kraxel@redhat.com

drm/xen: Simplify fb_create

The current code is a pretty good wtf moment, since we drop the
reference before we use it. It's not a big deal, because a) we only
use the pointer, so doesn't blow up and the real reason b) fb->obj[0]
already holds a full reference for us.

Might as well take the real pointer ins't of complicated games that
baffle.

Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: xen-devel@lists.xenproject.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191115092120.4445-7-daniel.vetter@ffwll.ch

drm/tilcdc: Drop drm_gem_fb_create wrapper

Doesn't do anything.

Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115092120.4445-6-daniel.vetter@ffwll.ch

drm/atmel: ditch fb_create wrapper

Spotted while looking through them all.

Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191115092120.4445-3-daniel.vetter@ffwll.ch

drm/gma500: Fixup fbdev stolen size usage evaluation

psbfb_probe performs an evaluation of the required size from the stolen
GTT memory, but gets it wrong in two distinct ways:
- The resulting size must be page-size-aligned;
- The size to allocate is derived from the surface dimensions, not the fb
  dimensions.

When two connectors are connected with different modes, the smallest will
be stored in the fb dimensions, but the size that needs to be allocated must
match the largest (surface) dimensions. This is what is used in the actual
allocation code.

Fix this by correcting the evaluation to conform to the two points above.
It allows correctly switching to 16bpp when one connector is e.g. 1920x1080
and the other is 1024x768.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107153048.843881-1-paul.kocialkowski@bootlin.com

fbdev: Unexport unlink_framebuffer()

There are no external callers of unlink_framebuffer() left. Make the
function an internal interface.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114125106.28347-4-tzimmermann@suse.de

drm/fb-helper: Remove drm_fb_helper_unlink_fbi()

There are no callers of drm_fb_helper_unlink_fbi() left. Remove the
function.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114125106.28347-3-tzimmermann@suse.de

drm/udl: Replace fbdev code with generic emulation

The udl driver can use the generic fbdev implementation. Convert it.

v5:
* initialize console after registering device
v4:
* hardcode console bpp to 16
v3:
* remove module parameter fb_bpp in favor of fbdev's video
* call drm_fbdev_generic_setup() directly; remove udl_fbdev_init()
* use default for struct drm_mode_config_funcs.output_poll_changed
* use default for struct drm_driver.lastclose

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114125106.28347-2-tzimmermann@suse.de

drm/komeda: Clean warnings: candidate for 'gnu_printf’ format attribute

komeda/komeda_event.c: In function ‘komeda_sprintf’:
komeda/komeda_event.c:31:2: warning: function ‘komeda_sprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
  num = vsnprintf(str->str + str->len, free_sz, fmt, args);

v2: Update the comment msg.

Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114100421.30510-1-james.qian.wang@arm.com

drm/gma500: remove set but not used variable 'channel_eq'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/gma500/cdv_intel_dp.c: In function cdv_intel_dp_complete_link_train:
drivers/gpu/drm/gma500/cdv_intel_dp.c:1596:7: warning: variable channel_eq set but not used [-Wunused-but-set-variable]

It is never used, so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1573902268-117518-1-git-send-email-zhengbin13@huawei.com

drm/fbdev: Fallback to non tiled mode if all tiles not present

In case of tiled displays, if we hotplug just one connector,
fbcon currently just selects the preferred mode and if it is
tiled mode then that becomes a problem if rest of the tiles are
not present.
So in the fbdev driver on hotplug when we probe the client modeset,
if we dont find all the connectors for all tiles, then on a connector
with one tile, just fallback to the first available non tiled mode
to display over a single connector.
On the hotplug of the consecutive tiled connectors, if the tiled mode
no longer exists because of fbcon size limitation, then return
no modes for consecutive tiles but retain the non tiled mode
on the 0th tile.
Use the same logic in case of connected boot case as well.
This has been tested with Dell UP328K tiled monitor.

v2:
* Set the modes on consecutive hotplugged tiles to no mode
if tiled mode is pruned (Dave)
v1:
* Just handle the 1st connector hotplug case
* v1 Reviewed-by: Dave Airlie <airlied@redhat.com>

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Dave Airlie <airlied@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113222952.9231-1-manasi.d.navare@intel.com

drm/edid: no CEA v3 extension is not an error

It is fine for displays without audio functionality to not implement
CEA v3 extension in their EDID. Do not return an error in that case,
instead return 0 as if there was a CEA v3 extension with no audio or
speaker block.

This fixes the second half of bug fdo#107825:
https://bugs.freedesktop.org/show_bug.cgi?id=107825

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191115170736.7d88593d@endymion

drm/gma500: remove set but not used variable 'is_hdmi','is_crt'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/gma500/cdv_intel_display.c: In function cdv_intel_crtc_mode_set:
drivers/gpu/drm/gma500/cdv_intel_display.c:594:7: warning: variable is_hdmi set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/gma500/cdv_intel_display.c: In function cdv_intel_crtc_mode_set:
drivers/gpu/drm/gma500/cdv_intel_display.c:593:7: warning: variable is_crt set but not used [-Wunused-but-set-variable]

They are not used since commit acd7ef927e06 ("gma500:
Update the Cedarview clock handling")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1573828027-122323-4-git-send-email-zhengbin13@huawei.com

drm/gma500: remove set but not used variable 'error'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/gma500/psb_irq.c: In function psb_sgx_interrupt:
drivers/gpu/drm/gma500/psb_irq.c:210:6: warning: variable error set but not used [-Wunused-but-set-variable]

It is introduced by commit 64a4aff283ac ("drm/gma500:
Add support for SGX interrupts"), but never used, so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1573828027-122323-3-git-send-email-zhengbin13@huawei.com

drm/gma500: remove set but not used variable 'htotal'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/gma500/oaktrail_hdmi.c: In function htotal_calculate:
drivers/gpu/drm/gma500/oaktrail_hdmi.c:160:6: warning: variable htotal set but not used [-Wunused-but-set-variable]

It is introduced by commit 39ec748f7174 ("gma600: Enable HDMI support"),
but never used, so remove it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1573828027-122323-2-git-send-email-zhengbin13@huawei.com

drm/panel: Add DT bindings for Sony ACX424AKP

This adds device tree bindings for the Sony ACX424AKP panel.
Let's use YAML.

Cc: devicetree@vger.kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114131525.3988-1-linus.walleij@linaro.org

drm/ast: Call struct drm_driver.{load, unload} before registering device

Both callbacks are deprecated. Remove them and call functions explicitly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113155857.9507-3-tzimmermann@suse.de

drm/ast: Replace drm_get_pci_device() and drm_put_dev()

Both functions are deprecated. Open-code them them in preparation
of removing struct drm_driver.{load,unload}.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113155857.9507-2-tzimmermann@suse.de

drm/print: group logging functions by prink or device based

In preparation for adding struct drm_device based logging, group the
existing functions by prink or struct device based logging. No
functional changes.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/51c70d80e7dd06c49ba3be56fbb6ae70edddc102.1572258936.git.jani.nikula@intel.com

drm/print: convert debug category macros into an enum

Mostly for improved documentation, convert the debug category macros
into an enum. Drop unused DRM_UT_NONE. Document previously undocumented
categories.

Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/96582479e7829d92b89adb805f829e23043ca85c.1572258936.git.jani.nikula@intel.com

drm/print: underscore prefix functions that should be private to print

We don't want people calling the functions directly. No functional
changes.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6b236ed4d2e6d2987eaaeb9cb737f9c3699281cc.1572258936.git.jani.nikula@intel.com

drm/print: rename drm_debug to __drm_debug to discourage use

drm_debug_enabled() is the way to check. __drm_debug is now reserved for
drm print code only. No functional changes.

v2: Rebase on move unlikely() to drm_debug_enabled()

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/840ff7292d1a39512bac2fcb1f45de9d50694bf1.1572258936.git.jani.nikula@intel.com

drm/amdgpu: use drm_debug_enabled() to check for debug categories

Allow better abstraction of the drm_debug global variable in the
future. No functional changes.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David (ChunMing) Zhou <David1.Zhou@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e30ddbd627be1fe1c67dd007e0d36f81a094bc91.1572258936.git.jani.nikula@intel.com

drm/nouveau: use drm_debug_enabled() to check for debug categories

Allow better abstraction of the drm_debug global variable in the
future. No functional changes.

v2: move unlikely() to drm_debug_enabled()

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/34a1e7db6eab6467c6607d9a57581d1de75d87da.1572258936.git.jani.nikula@intel.com

drm/i915: use drm_debug_enabled() to check for debug categories

Allow better abstraction of the drm_debug global variable in the
future. No functional changes.

Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e94fe4977c5b8cac68556318be81f8e422e973fd.1572258936.git.jani.nikula@intel.com

drm/komeda: Adds gamma and color-transform support for DOU-IPS

Adds gamma and color-transform support for DOU-IPS.
Adds two caps members fgamma_coeffs and ctm_coeffs to komeda_improc_state.
If color management changed, set gamma and color-transform accordingly.

v5: Rebase with drm-misc-next

Signed-off-by: Lowry Li (Arm Technology China) <lowry.li@arm.com>
Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112110927.20931-5-james.qian.wang@arm.com

drm/komeda: Add drm_ctm_to_coeffs()

This function is for converting drm_color_ctm matrix to komeda hardware
required required Q2.12 2's complement CSC matrix.

v2:
  Move the fixpoint conversion function s31_32_to_q2_12() to drm core
  as a shared helper.

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112110927.20931-4-james.qian.wang@arm.com

drm/komeda: Add drm_lut_to_fgamma_coeffs()

This function is used to convert drm color lut to komeda HW required curve
coeffs values.

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112110927.20931-3-james.qian.wang@arm.com

drm: Add a new helper drm_color_ctm_s31_32_to_qm_n()

Add a new helper function drm_color_ctm_s31_32_to_qm_n() for driver to
convert S31.32 sign-magnitude to Qm.n 2's complement that supported by
hardware.

V4: Address Mihai, Daniel and Ilia's review comments.
V5: Includes the sign bit in the value of m (Qm.n).
V6: Allows m = 0 according to Mihail's comments.
V7: Address Mihail's comments.
V8: Use type 'u32' to replace 'uint32_t'
V9: Rebase.

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112110927.20931-2-james.qian.wang@arm.com

drm/fb-helper: unexport drm_fb_helper_generic_probe

Not sure we don't yet have this as a patch somewhere ...

Motivation is that the automatic lifetime management of the generic fbdev
code is quite tricky, and it'll get even more tricky. Allowing drivers
to just use the fb_probe looks like a recipe for disaster.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112175048.1581-1-daniel.vetter@ffwll.ch

drm/bridge: anx6345: Fix compilation breakage on systems without CONFIG_OF

The driver assumes that the platform uses the device tree, and thus relies
on some fields (of_node) being declared in some structures (drm_bridge).

This isn't true for all platforms, so make sure we can only compile the
ANX6345 on platforms where DT support is selected.

Cc: Torsten Duwe <duwe@lst.de>
Fixes: 6aa192698089 ("drm/bridge: Add Analogix anx6345 support")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112204551.541449-1-maxime@cerno.tech

drm/komeda: Fix komeda driver build error

Fix the build errors lead by

'commit 4039f0293bbd ("drm/komeda: Add option to print WARN- and INFO-level IRQ events")'

Signed-off-by: james qian wang (Arm Technology China) <james.qian.wang@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191113013114.3013-1-james.qian.wang@arm.com

drm/bridge: fix anx6345 compilation for v5.5

The anx6345 driver originally was copied from anx78xx.c, which has meanwhile
seen a few changes. In particular, the removal of drm_dp_link helpers and the
discontinuation to include drm_bridge.h from drm_crtc.h breaks compilation
in linux-5.5. Apply equivalents of these changes to anx6345.c.

Fixes: 6aa192698089 ("drm/bridge: Add Analogix anx6345 support")
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191112175940.GA13539@lst.de

drm/virtgpu: fix double unregistration

drm_put_dev also calls drm_dev_unregister, so dev will be unregistered
twice.
Replace it with drm_dev_put to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191109075417.29808-1-hslester96@gmail.com

drm/komeda: add rate limiting disable to err_verbosity

It's possible to get multiple events in a single frame/flip, so add an
option to print them all.

Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-6-mihail.atanassov@arm.com

drm/komeda: Add option to print WARN- and INFO-level IRQ events

Extra detail (normally off) almost never hurts.

Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-5-mihail.atanassov@arm.com

drm/komeda: Optionally dump DRM state on interrupts

It's potentially useful information when diagnosing error/warn IRQs, so
dump it to dmesg with a drm_info_printer. Hide this extra debug dumping
behind another komeda_dev->err_verbosity bit.

Note that there's not much sense in dumping it for INFO events,
since the VSYNC event will swamp the log.

Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-4-mihail.atanassov@arm.com

drm/komeda: Remove CONFIG_KOMEDA_ERROR_PRINT

Now that there's a debugfs node to control the same, remove the
config option.

Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-3-mihail.atanassov@arm.com

drm/komeda: Add debugfs node to control error verbosity

Named 'err_verbosity', currently with only 1 active bit in that
replicates the existing level - print error events once per flip.

Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-2-mihail.atanassov@arm.com

drm/mcde: Handle pending vblank while disabling display

Disabling the display using MCDE currently results in a warning
together with a delay caused by some timeouts:

    mcde a0350000.mcde: MCDE display is disabled
    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 20 at drivers/gpu/drm/drm_atomic_helper.c:2258 drm_atomic_helper_commit_hw_done+0xe0/0xe4
    Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support)
    Workqueue: events drm_mode_rmfb_work_fn
    [<c010f468>] (unwind_backtrace) from [<c010b54c>] (show_stack+0x10/0x14)
    [<c010b54c>] (show_stack) from [<c079dd90>] (dump_stack+0x84/0x98)
    [<c079dd90>] (dump_stack) from [<c011d1b0>] (__warn+0xb8/0xd4)
    [<c011d1b0>] (__warn) from [<c011d230>] (warn_slowpath_fmt+0x64/0xc4)
    [<c011d230>] (warn_slowpath_fmt) from [<c0413048>] (drm_atomic_helper_commit_hw_done+0xe0/0xe4)
    [<c0413048>] (drm_atomic_helper_commit_hw_done) from [<c04159cc>] (drm_atomic_helper_commit_tail_rpm+0x44/0x6c)
    [<c04159cc>] (drm_atomic_helper_commit_tail_rpm) from [<c0415f5c>] (commit_tail+0x50/0x10c)
    [<c0415f5c>] (commit_tail) from [<c04160dc>] (drm_atomic_helper_commit+0xbc/0x128)
    [<c04160dc>] (drm_atomic_helper_commit) from [<c0430790>] (drm_framebuffer_remove+0x390/0x428)
    [<c0430790>] (drm_framebuffer_remove) from [<c0430860>] (drm_mode_rmfb_work_fn+0x38/0x48)
    [<c0430860>] (drm_mode_rmfb_work_fn) from [<c01368a8>] (process_one_work+0x1f0/0x43c)
    [<c01368a8>] (process_one_work) from [<c0136d48>] (worker_thread+0x254/0x55c)
    [<c0136d48>] (worker_thread) from [<c013c014>] (kthread+0x124/0x150)
    [<c013c014>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
    Exception stack(0xeb14dfb0 to 0xeb14dff8)
    dfa0:                                     00000000 00000000 00000000 00000000
    dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
    ---[ end trace 314909bcd4c7d50c ]---
    [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:crtc-0] flip_done timed out
    [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:DSI-1] flip_done timed out
    [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] flip_done timed out

The reason for this is that there is a vblank event pending, but we
never handle it after disabling the vblank interrupts.

Check if there is an vblank event pending when disabling the display,
and clear it by sending a fake vblank event in that case.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-8-stephan@gerhold.net

drm/mcde: dsi: Enable clocks in pre_enable() instead of mode_set()

The DSI initialization sequence incorrectly assumes that the mode_set()
function of the DRM bridge is always called when (re-)enabling the display.
This is not necessarily the case.

Keeping the device idle in the framebuffer console for a while results
in the display being turned off using the disable() function. However,
as soon as any key is pressed only (pre_)enable() are called.
mode_set() is skipped because the mode has not been changed.

In this case, the DSI HS/LP clocks are never turned back on,
preventing the display from working.

Fix this by moving a part of the initialization sequence from
mode_set() to pre_enable(). Keep most of the video mode setup in
mode_set() since most of the registers are only dependent on the mode
that is set for the panel - there is no need to write them again each
time we re-enable the display.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-7-stephan@gerhold.net

drm/mcde: dsi: Fix duplicated DSI connector

Using a (single) DSI display with MCDE currently results in
two "connected" connectors:

  Connector: DSI-1
          id             : 34
          encoder id     : 0
          conn           : connected
          size           : 0x0 (mm)
          count_modes    : 0
          count_props    : 5
          props          : 1 2 5 6 4
          count_encoders : 1
          encoders       : 33
  Connector: DSI-2
          id             : 35
          encoder id     : 33
          conn           : connected
          size           : 53x89 (mm)
          count_modes    : 1
          count_props    : 5
          props          : 1 2 5 6 4
          count_encoders : 1
          encoders       : 33
    Mode: "480x800" 480x800 60

Although both show up as connected, the first one does not have
any size and no available modes. This confuses userspace tools
(e.g. kmscube) who look for available modes for the first connector.

The reason for the duplicated connector is that mcde_dsi.c and the
DRM panel bridge helper both set up a DSI connector, with more or less
the same code. The connector set up by the DRM panel bridge is the
one that is correctly set up in the example above.

Therefore we can just remove the connector setup from mcde_dsi.c
and let the DRM core handle all the hard work.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-6-stephan@gerhold.net

drm/mcde: dsi: Delay start of video stream generator

The initialization order for DSI video mode is important - if we
enable the video stream generator (VSG) before the MCDE DSI formatter
starts sending pixel data, it will immediately run into an error and
disable itself again.

Avoid this problem by delaying the activation of the VSG
until the MCDE DSI formatter is properly set up and running
(i.e. when mcde_dsi_bridge_enable() is called).

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-5-stephan@gerhold.net

drm/mcde: dsi: Make video mode errors more verbose

Triggering an error conditions in DSI video mode only results in
a very generic "some video mode error status" error message
at the moment.

Make this more clear by adding separate error messages for each bit.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-4-stephan@gerhold.net

drm/mcde: Fix frame sync setup for video mode panels

The MCDE driver differentiates only between "te_sync"
(for hardware TE0 sync) and software sync
(i.e. manually triggered updates) at the moment.

However, none of these options work correctly for video mode panels.
Therefore, we need to make some changes to make them work correctly:

  - Select hardware sync coming from the (DSI) formatter.
  - Keep the FIFO permanently enabled (otherwise MCDE will stop
    feeding data to the panel).
  - Skip manual software sync (this is not necessary in video mode).

Automatically detect if the connected panel is using video mode
and enable the necessary changes in that case.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-3-stephan@gerhold.net

drm/mcde: Provide vblank handling unconditionally

At the moment, vblank handling is only enabled together with
TE synchronization. However, the vblank IRQ is also working with
on displays without TE synchronization (e.g. DSI video mode panels).
It seems like the vblank IRQ is actually generated by the
MCDE hardware for the channel.

Therefore, the vblank handling should be working correctly in
all the cases and we can enable it unconditionally.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-2-stephan@gerhold.net

drm/rockchip: use DRM_DEV_ERROR for log output

Replace the use of the dev_err macro with the DRM_DEV_ERROR
DRM helper macro. rockchip driver uses almost exclusively DRM_* logging
(aside from 2 dev_* instances, one of which is converted in this patch),
so this makes things more consistent.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
[seanpaul expanded on the commit message]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107092945.15513-1-wambui.karugax@gmail.com

drm/udl: Remove struct udl_gem_object and functions

Simply removes all the obsolete GEM code from udl. No functional
changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107094307.19870-5-tzimmermann@suse.de

drm/udl: Switch to SHMEM

Udl's GEM code and the generic SHMEM are almost identical. Replace
the former with SHMEM. The dmabuf support in udl is being replaced
with generic GEM PRIME functions.

The main difference is in the caching flags for mmap pages. By
default, SHMEM always sets (uncached) write combining. In udl's
memory management code, only imported buffers use write combining.
Memory pages of locally created buffer objects are mmap'ed with
caching enabled. To keep the optimization, udl provides its own
mmap function for GEM objects where it fixes up the mapping flags.

v3:
- restore udl vmap that enables caching
v2:
- remove obsolete code in a separate patch

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107094307.19870-4-tzimmermann@suse.de

drm/udl: Allocate GEM object via struct drm_driver.gem_create_object

In preparation of a switch to SHMEM, udl now allocates its GEM
objects via struct drm_driver.gem_create_object. No functional
changes are made.

For SHMEM GEM objects, udl will require the use of a special mmap
function, which we set though the create-object function.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107094307.19870-3-tzimmermann@suse.de

drm/udl: Remove flags field from struct udl_gem_object

The flags field in struct udl_gem controls mapping parameters: cached
access for local buffers, write-combined access for imported buffers.

We can drop the field and distinguish both cases by testing whether
struct drm_gem_object.import_attach is NULL.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107094307.19870-2-tzimmermann@suse.de

drm/radeon: finally fix the racy VMA setup

Finally clean up the VMA setup for radeon now that TTM exports the
necessary functions.

No functional change, but only compile tested.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/339354/

drm/ttm: also export ttm_bo_vm_fault v2

That is needed by at least a cleanup in radeon.

v2: also export ttm_bo_vm_access

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/339353/

drm/ast: Enable atomic modesetting

This commit sets the remaining atomic-modesetting helpers and the flag
DRIVER_ATOMIC. Legacy cursor functions are removed in favor of the cursor
plane. For power management, atomic helpers replace the indvidual
operations that the driver currently runs.

Atomic modesetting is enabled with this commit.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-10-tzimmermann@suse.de

drm/ast: Add cursor plane

The cursor plane uses an internal format of ARGB4444. To userspace, we
announce ARGB8888 and do the transformation internally.

v2:
* don't set plane call-back functions to NULL explicitly
* define plane format array in global scope

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-9-tzimmermann@suse.de

drm/ast: Add CRTC helpers for atomic modesetting

As the CRTC code has already been prepared for a split between mode
setting and plane handling, most of the CRTC's atomic modesetting is
build upon primitives of the non-atomic implementation.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-8-tzimmermann@suse.de

drm/ast: Add primary plane

Like the original mode-setting code, the primary plane supports XRGB888,
RGB565 and C8. The plane itself only pins BOs and sets the base address
and scanline offset. The mode-setting code will be located in the CRTC's
atomic helpers.

v2:
* don't set plane call-back functions to NULL explicitly
* define plane format array in global scope

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-7-tzimmermann@suse.de

drm/ast: Split ast_set_vbios_mode_info()

The implementation of ast_set_vbios_mode() converts a DRM display mode
and framebuffer into an adjusted mode and stores information for the
video BIOS to several scratch regsiters.

Here we split the function into individual functions that do the
conversion, set the VBIOS mode information and format information.
This makes it compatible with support for primary planes and atomic
modesetting.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-6-tzimmermann@suse.de

drm/ast: Split ast_set_ext_reg() into color and threshold function

In ast_set_ext_reg() sets several framebuffer options and CRT threshold
parameters. The former is mostly state of the primary plane; the latter
is constant. Hence, split the function in two and make it work with
atomic modesetting.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-5-tzimmermann@suse.de

drm/ast: Don't clear base address and offset with default values

The content of the base-address and offset registers are state of
the primary plane. Clearing it to default values will interfere with
plane functions for atomic mode setting.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-4-tzimmermann@suse.de

drm/ast: Check video-mode requirements against VRAM size

Each video mode's primary plane requires a minimum amount of video
memory. For double buffering, this is at most half the available
VRAM. Check this constraint.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-3-tzimmermann@suse.de

drm/ast: Remove last traces of struct ast_gem_object

The ast driver has switched to struct drm_vram_gem_object a while ago.
This patch removes a function and forward declaration that were forgotten
before.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-2-tzimmermann@suse.de

drm/bridge: Add Analogix anx6345 support

The ANX6345 is an ultra-low power DisplayPower/eDP transmitter designed
for portable devices. This driver adds initial support for RGB to eDP
mode, without HPD and interrupts.

This is a configuration usually seen in eDP applications.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135220.590D968BFE@verein.lst.de

drm/bridge: Prepare Analogix anx6345 support

Add bit definitions required for the anx6345 and add a
sanity check in anx_dp_aux_transfer.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135218.01C2168C4E@verein.lst.de

drm/bridge: extract some Analogix I2C DP common code

Some code can be shared within different DP bridges by Analogix.
Extract them to analogix_dp.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135214.966BD68BFE@verein.lst.de

drm/bridge: split some definitions of ANX78xx to dedicated headers

Some definitions currently in analogix-anx78xx.h are not restricted to
the ANX78xx series, but also applicable to other DisplayPort
transmitters by Analogix.

Split out them to dedicated headers, and make analogix-anx78xx.h include
them.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135212.4D41E68BE1@verein.lst.de

drm/bridge: move ANA78xx driver to analogix subdirectory

As ANA78xx chips are designed and produced by Analogix Semiconductor,
Inc, move their driver codes into analogix subdirectory.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135202.2089C68BE1@verein.lst.de

drm/tilcdc: Provide ddc symlink in connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/
Link: https://patchwork.freedesktop.org/patch/msgid/
Link: https://patchwork.freedesktop.org/patch/msgid/

drm/mediatek: Provide ddc symlink in hdmi connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/

drm/exynos: Provide ddc symlink in connector's sysfs

Switch to using the ddc provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/

drm/msm/hdmi: Provide ddc symlink in hdmi connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/

drm: rockchip: Provide ddc symlink in inno_hdmi sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/

drm: rockchip: Provide ddc symlink in rk3066_hdmi sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/

drm/amdgpu: Provide ddc symlink in dm connector's sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/

drm/radeon: Provide ddc symlink in connector sysfs directory

Use the ddc pointer provided by the generic connector.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/

drm/dsi: add helpers for DSI compression mode and PPS packets

Add helper functions for sending the DSI compression mode and picture
parameter set data type packets. For the time being, limit the support
to using VESA DSC 1.1 and the default PPS. This may need updating if the
need arises for proprietary compression or non-default PPS, however keep
it simple for starters.

v2: Add missing EXPORT_SYMBOL

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-5-jani.nikula@intel.com

drm/dsi: rename MIPI_DCS_SET_PARTIAL_AREA to MIPI_DCS_SET_PARTIAL_ROWS

The DCS command has been named SET_PARTIAL_ROWS in the DCS spec since
v1.02, for more than a decade. Rename the enumeration to match the spec.

v2: add comment about the rename (David Lechner)

Cc: David Lechner <david@lechnology.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-4-jani.nikula@intel.com

drm/dsi: add missing DSI DCS commands

Update from the DCS specification.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-3-jani.nikula@intel.com

drm/dsi: add missing DSI data types

Add execute queue and compressed pixel stream packet data types for
completeness.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-2-jani.nikula@intel.com

drm/dsi: clean up DSI data type definitions

Rename picture parameter set (it's a long packet, not a long write) and
compression mode (it's not a DCS command) enumerations according to the
DSI specification. Order the types according to the spec. Use tabs
instead of spaces for indentation. Use all lower case for hex.

Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191028150047.22048-1-jani.nikula@intel.com