compat: backport sock_recv_ts_and_drops

This is needed for bluetooth

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: fix a crash in the netlink backport

Do not set the .doit wrapper if there is no .doit function.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

compat: rename member in struct mmc_host.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport some more kfifo stuff

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport netlink changes used in the nl80211 cleanup

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

compat: fix build error in init_dummy_netdev

In kernel <= 2.6.28 the member napi_list in struct net_device is only
availabe if CONFIG_NETPOLL is set. We should initialize it only if it
is available.

This should fix the problem reported by Philip.

This should also go into stable.

CC: philipp_subx@redfish-solutions.com
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: pcmcia/cs.h is removed form new kernels

On older kernel versions we have to include pcmcia/cs_types.h and
pcmcia/cs.h before pcmcia/cistpl.h.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: move pmcia backport code into compat-2.6.36.h

We have all out backport headers in include/linux/compat-2.6.XX.h also the pcmcia
part there.

CC: Kshitij Kulshreshtha <kkhere.geo@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport some usb urb functions

These functions have to be backported, because they were thread-unsafe.
This is commit b3e670443b7fb8a2d29831b62b44a039c283e351 in mainline kernel.

CC: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport PCMCIA API changes.

This backports the API change to pcmcia_enable_device

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport list_for_each_entry_continue_rcu

This is needed for new driver carl9170.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport loff_t noop_llseek

This is needed by some debug parts of mac80211.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport printk_once

This is needed by brcm80211.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport skb_checksum_none_assert

This is needed by atlx, b44, atl1c and atl1e.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport linux/pci-aspm.h

pci-aspm.h was introduced in kernel 2.6.25 and is used by the ath5k and iwlwifi driver.

v2: Do not place the empty functions into pci-aspm.h. Now we do not
have to change pci-aspm.h when it changes in the mainline kernel only
compat-2.6.26.h has to be changed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: add support for ndo_init backport

ath6kl uses this.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat: define PM_EVENT_SLEEP only if not defined

This fixes a compilation warning on Ubuntu's 2.6.24
kernel which added the PM_EVENT_SLEEP even though upstream
Linux 2.6.24.7 (the last 2.6.24) does not have it. Its
a trivial change and I'm willing to support it to avoid
compilation.

Tested against /lib/modules/2.6.24-27-lpia/build

These kernel headers can be foudn here:

http://kernel.org/pub/linux/kernel/people/mcgrof/ubuntu/debs/kernel-headers/

Install with dpkg -i --force-architecture *.deb

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat: fix warning in device_rename

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport net_ns_type_operations

net_ns_type_operations needs to be exported. This only works for kernel
>= 2.6.35 because struct kobj_ns_type_operations was introduced in
kernel 2.6.35.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport init_dummy_netdev

NETREG_DUMMY is not available for older kernels, it should be set to
something not normal. NETREG_DUMMY is set to 5 in new kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport SDIO_CLASS_BT_AMP

This is needed by drivers/bluetooth/btsdio.c

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: update compat_firmware_class.c

Refresh code based on recent version in linux-next.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: fix compiler warning

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: move va_format to compat-2.6.36.h

This struct was introduced in kernel 2.6.36 and not 2.6.35.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport n_tty_ioctl_helper

This function is needed by some bluetooth drivers

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: add br_port_exists() and ask for inclusion upstream

The br_port_exists() call is used internally on private bridge
code on net/bridge/ to check if a netdevice is a bridge port.
The way to check if a netdevice is a bridge port has changed
for 2.6.36 from checking the netdev->br_port pointer to
checking for a IFF_BRIDGE_PORT flag on the netdev->priv_flags.

Instead of requiring backport code to ifdef the checks lets
move the private br_port_exists() to a public header accessible
by drivers and consistantly use it to check for the bridge
port.

I'll submit a patch upstream to move br_port_exists() to a public
header so that we don't have to later even require a patch on
backported code. We'll see if it gets accepted though.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat: move struct va_format to 2.6.35 header

This was added as of the 2.6.35-rc1 kernel.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat: backport pcmcia_{read,write}_config byte from v2.6.36

Signed-off-by: Kshitij Kulshreshtha <kkhere.geo@gmail.com>

compat: define struct va_format introduced in v2.6.36

Signed-off-by: Kshitij Kulshreshtha <kkhere.geo@gmail.com>

compat: header <pcmcia/cs_types.h> was removed in v2.6.36

the header <pcmcia/cs.h> in versions < 2.6.36 requires types defined
in <pcmcia/cs_types.h> so include it first.

Signed-off-by: Kshitij Kulshreshtha <kkhere.geo@gmail.com>

compat: backport hex_to_bin first introduced in v2.6.35

Signed-off-by: Kshitij Kulshreshtha <kkhere.geo@gmail.com>

compat: fix build if CONFIG_PCCARD=y and CONFIG_PCMCIA=n

The includes are needed for pccard_loop_tuple.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: fix tracpoint building

trace/define_trace.h can be included more often and it have to.

This fixes some errors like this:
WARNING: "__tracepoint_iwlwifi_dev_rx" [/home/hauke/compat-wireless/compat-wireless-git/drivers/net/wireless/iwlwifi/iwlcore.ko] undefined!

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: Fix panic caused by NULL pointer derefence in rtnl_fill_ifinfo

get stats netdev ops is blindy called for older kernels (< 2.6.29) and
so assigning a NULL pointer from netdev_attach_ops causes a NULL pointer
dereference.

By default, netdev alloc provides an internal stats reference. So fill
this only if ndo_get_stats is defined.

Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>

compat: backport skb_queue_splice_init

This is needed by iwmc3200wifi.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport lockdep_assert_held

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport sdio_writeb_readb

This is needed by wl1251_sdio.c
Use sdio_readb instead of sdio_writeb_readb as long as sdio_writeb_readb was not realy backported.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport dma_set_coherent_mask

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: use kernel pm_qos_params.h

Do not use pm_qos_params.h from compat-wireless if the kernel also
ships this file. In kernel 2.6.35 pm_qos_params.h changed and the in
kernel header file is needed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport small functions and defines

Backport of some functions and defines needed by compat-wireless.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: move kparam_{block,unblock}_sysfs_write

kparam_block_sysfs_write and kparam_unblock_sysfs_write are not in
kernel 2.6.35, move them to backport from kernel 2.6.36.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: update bitops.h and wireless.h

copy files from linux-next next-20100604

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport USHRT_MAX, SHRT_MAX and SHRT_MIN

This backports this patch:

Author: Alexey Dobriyan <adobriyan@gmail.com>
Date:   Mon May 24 14:33:03 2010 -0700

    kernel-wide: replace USHORT_MAX, SHORT_MAX and SHORT_MIN with USHRT_MAX, SHRT_MAX and SHRT_MIN

    - C99 knows about USHRT_MAX/SHRT_MAX/SHRT_MIN, not
      USHORT_MAX/SHORT_MAX/SHORT_MIN.

    - Make SHRT_MIN of type s16, not int, for consistency.

    [akpm@linux-foundation.org: fix drivers/dma/timb_dma.c]
    [akpm@linux-foundation.org: fix security/keys/keyring.c]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat: create the udev directories for compat_firmware file

In case the directories are non existant create them.

Reported-by: Jaroslav Fojtik <jafojtik@seznam.cz>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Remove the stupid SET_NETDEVOP

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Fix the syntax for the defines passed for compat

Spaces would not have worked without this.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Add a COMPAT_PROJECT tag

This will be used to identify the backport project
only during initialization, there is no associated
module parameter for this as there is no need for it.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Add the COMPAT_BASE_TREE and COMPAT_BASE_TREE_VERSION

These are to be used by projects using this tree for their
own backport projects.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Modify the compat print

This uses the COMPAT_VERSION on the print

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat: add compat_version read-only module parameter

This will allow you to supply a version tag for the
backport you use. Compat-wireless will re-use this and
give it its own value based on the kernel we backport
from. It will use either the linux-next git describe
or the stable kernel git describe. Any delta on top of
the git tree should also be reflected then in case of
custom private trees/releases.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat: move usb_{alloc,free}_coherent

usb_alloc_coherent and usb_free_coherent were introduced in kernel 2.6.34.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: move kparam_{block,unblock}_sysfs_write

kparam_block_sysfs_write and kparam_unblock_sysfs_write will introduced
in kernel 2.6.35 and not 2.6.33.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport eth_change_mtu and eth_validate_addr

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: add the ndo_select_queue for netdev_attach_ops()

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat: add the rest of the missing netdev_attach_ops()

If you don't see your net_device_ops implemented on
netdev_attach_ops() then you are shit out of luck and
you must do the nasty ifdef magic.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat: add new way to backport the usage of net_device_ops

We tend to #ifdef code that uses the new net_device_ops
on kernels older than 2.6.29. This tends to create a burden
on the upkeeping of the hunks. We can minimize our work by
instead definining a new netdev_attach_ops() which will do
our backport work for the older kernels and simply attach
the ops for newer kernels.

This should simplify backporting of network drivers
considerably.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat: backport usb_alloc_coherent() and usb_free_coherent()

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport sk_sleep

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: update compat_firmware_class.c to new version

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: fix uevent_suppress on 2.6.29 or older kernels

Missing uevent_suppress is causing two uevents instead of one, which is
confusing udev and sometimes causing firmware load to fail due to race
condition, so let's add it.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>

compat: backport convert multicast list to list_head.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: Add linux/version.h include before using it.

This causes problems if theses header files are used without including
linux/compat-2.6.h

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: Add definitions needed for libertas sdio driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: add rcu_dereference_check

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

compat: add net/net_namespace.h stub for Linux 2.6.23 and older

This obviates a good part of 06-header-changes.patch in compat-wireless.

Signed-off-by: Pavel Roskin <proski@gnu.org>

compat: add stub headers linux/tracepoint.h and trace/define_trace.h

This should make 13-trace.patch in compat-wireless unnecessary.

Signed-off-by: Pavel Roskin <proski@gnu.org>

compat: add device_create() implementation for Linux 2.6.26 and older

This should make 25-device_create.patch in compat-wireless unnecessary.

Signed-off-by: Pavel Roskin <proski@gnu.org>

compat: Backport clamp

This is needed by the ath5k driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: add qdisc_all_tx_empty for Linux 2.6.26 and older

compat: add compat-2.6.35.h and IW_HANDLER

compat: add compat-2.6.35.h and IW_HANDLER

Signed-off-by: Pavel Roskin <proski@gnu.org>

compat: backport PCMCIA_DEVICE_PROD_ID3

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: update bitops.h

Copy header from recent linux-next

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport device_{lock,trylock,unlock}

This fixes build of ar9170.

CC: Gus Wirth <gwirth79@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: fix some build problems with kernel 2.6.24

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: define KEY_RFKILL, which appeared in Linux 2.6.33

It is used in net/rfkill/input.c

Signed-off-by: Pavel Roskin <proski@gnu.org>

compat: backport some more of the netdev debug printk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: move debugfs_remove_recursive() to compat-2.6.27

debugfs_remove_recursive() appeared in Linux 2.6.27, so it should be in
compat-2.6.27, not in compat-2.6.26.  Don't compile it if
CONFIG_DEBUG_FS is disabled.

Signed-off-by: Pavel Roskin <proski@gnu.org>

compat: backport debugfs_remove_recursive()

This avoids using the internal globals by the internal
kernel debugfs implementation.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat: backport for ARM dma_sync_single_range_*() helpers

This backports for ARM dma_sync_single_range_for_cpu()
and dma_sync_single_range_for_device() needed by the
b44 Ethernet driver.

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat: backport some netdevice.h defs

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: backport genlmsg_unicast

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: fix build on arm

ARM does not provided the include file asm/compat.h. Use linux/compat.h
instead, it includes asm/compat.h if needed.
This patch is from OpenWRT:
https://dev.openwrt.org/browser/trunk/package/mac80211/patches/020-fix_compat_h.patch?rev=19063

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: fix build with CONFIG_USB=m

The usb compat code was not build if usb was build as module in kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Install udev rules and scripts needed for compat_firmware_class

If you are a distribution maintainer and your distribution has
lsb_release and if you disagree with the way we handle the
uknown case just go ahead and add a case for yourself in
scripts/compat_firmware_install along with a directory and
your own files.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Fix build with CONFIG_USB disabled

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Fix build with CONFIG_PCMCIA disabled

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Only build compat_firmware_class if CONFIG_FW_LOADER was enabled

This prevents bothering with building compat_firmware_class if your
kernel lacks CONFIG_FW_LOADER support.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat: fix firmware class compile on linux 2.6.32

The firmware class API change happened after 2.6.32, so move the compat
code to the 2.6.33 header file.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

Fix loading of compat_firmware_class due to class name conflict

This fixes this warning:

[  869.248771] ------------[ cut here ]------------
[  869.248779] WARNING: at fs/sysfs/dir.c:463 sysfs_add_one+0x51/0x60()
[  869.248784] sysfs: duplicate filename 'firmware' can not be created
[  869.248788] Modules linked in: compat_firmware_class(+) aes_generic binfmt_misc ppdev i915 drm snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi rfcomm snd_rawmidi sco arc4 snd_seq_midi_event bridge stp snd_seq bnep mac80211 snd_timer pcmcia l2cap ath snd_seq_device btusb iptable_filter yenta_socket bluetooth cfg80211 psmouse snd thinkpad_acpi rfkill_backport ip_tables rsrc_nonstatic video serio_raw compat soundcore output x_tables nvram pcmcia_core led_class joydev lp parport usbhid ohci1394 ieee1394 e1000e intel_agp [last unloaded: ath5k]
[  869.248885] Pid: 6096, comm: modprobe Not tainted 2.6.27.41 #1
[  869.248890]
[  869.248892] Call Trace:
[  869.248902]  [<ffffffff8024cf18>] warn_slowpath+0x98/0xd0
[  869.248912]  [<ffffffff803cf518>] ? idr_get_empty_slot+0x108/0x2c0
[  869.248920]  [<ffffffff803cf780>] ? ida_get_new_above+0xb0/0x220
[  869.248927]  [<ffffffff80340559>] ? sysfs_ilookup_test+0x9/0x20
[  869.248934]  [<ffffffff802f8df4>] ? find_inode+0x54/0xa0
[  869.248940]  [<ffffffff80340550>] ? sysfs_ilookup_test+0x0/0x20
[  869.248948]  [<ffffffff802f8479>] ? __iget+0x9/0x70
[  869.248954]  [<ffffffff80340865>] ? sysfs_find_dirent+0x35/0x50
[  869.248961]  [<ffffffff80341811>] sysfs_add_one+0x51/0x60
[  869.248967]  [<ffffffff80341888>] create_dir+0x68/0xb0
[  869.248975]  [<ffffffff80341909>] sysfs_create_dir+0x39/0x50
[  869.248982]  [<ffffffff803d05ba>] ? kobject_get+0x1a/0x30
[  869.248989]  [<ffffffff803d0716>] kobject_add_internal+0xb6/0x200
[  869.248998]  [<ffffffff803d088f>] kset_register+0x2f/0x60
[  869.249009]  [<ffffffff8046869f>] __class_register+0xcf/0x1b0
[  869.249020]  [<ffffffffa000b000>] ? firmware_class_init+0x0/0x7e [compat_firmware_class]
[  869.249029]  [<ffffffffa000b021>] firmware_class_init+0x21/0x7e [compat_firmware_class]
[  869.249038]  [<ffffffff8020a041>] do_one_initcall+0x41/0x170
[  869.249047]  [<ffffffff80269411>] ? __blocking_notifier_call_chain+0x21/0x80
[  869.249059]  [<ffffffff8027974f>] sys_init_module+0xaf/0x1e0
[  869.249068]  [<ffffffff802116fa>] system_call_fastpath+0x16/0x1b
[  869.249072]
[  869.249075] ---[ end trace c1a363c5ede5a470 ]---
[  869.249082] kobject_add_internal failed for firmware with -EEXIST, don't try to register things with the same name in the same directory.
[  869.249092] Pid: 6096, comm: modprobe Tainted: G        W 2.6.27.41 #1
[  869.249096]
[  869.249097] Call Trace:
[  869.249104]  [<ffffffff803d07bd>] kobject_add_internal+0x15d/0x200
[  869.249112]  [<ffffffff803d088f>] kset_register+0x2f/0x60
[  869.249120]  [<ffffffff8046869f>] __class_register+0xcf/0x1b0
[  869.249130]  [<ffffffffa000b000>] ? firmware_class_init+0x0/0x7e [compat_firmware_class]
[  869.249139]  [<ffffffffa000b021>] firmware_class_init+0x21/0x7e [compat_firmware_class]
[  869.249146]  [<ffffffff8020a041>] do_one_initcall+0x41/0x170
[  869.249153]  [<ffffffff80269411>] ? __blocking_notifier_call_chain+0x21/0x80
[  869.249163]  [<ffffffff8027974f>] sys_init_module+0xaf/0x1e0
[  869.249170]  [<ffffffff802116fa>] system_call_fastpath+0x16/0x1b
[  869.249174]
[  869.249178] firmware_class_init: class_register failed

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Export CONFIG_COMPAT_FIRMWARE_CLASS

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Enable 2.6.33 compatibility

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Enable the compat_firmware_class to be built only on < 2.6.32

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Backport the new firmware_class from > 2.6.33 down to 2.6.23

My main concern with this backport was the usage of the
core driver "base.h" but as it turns out firmware_class doesn't
even need it. This allowed the backport to go through.

This new backport allows drivers which use the new modified firmware
API request_firmware_nowait() on older kernels. You should not
need to chagne the your request_firmware_nowait() calls at all;
the compat-2.6.32.h header ensures that your calls get mapped
to compat_request_firmware_nowait()

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Update for next-20100113

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

compat: build pccard and pcmcia condituinaly

If the kernel does not include pcmcia, compat.o should not relay on
methods provided by it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: autoconf.h moved from linux/ to generated/ with kernel 2.6.33

Changed the headers, because autoconf.h moved from linux/ into
generated/

All compat-2.6.XX.h files are included by compat-2.6.h, so only
compat-2.6.h needs to include autoconf.h. There is no situation known to
me where you want to include any compat-2.6.XX.h file directly.

This fixes build with kernel 2.6.33, without it complains about a
missing import:
/include/linux/compat-2.6.h:4:28: error: linux/autoconf.h: No such file or directory

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

compat: fix two return types

This fixes a build error introduced in 7d2b68df6301937a8299bca8bef135ae951b569c:
/include/linux/compat-2.6.25.h:172: error: two or more data types in declaration specifiers

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Add notes about why debugfs_remove_recursive() cannot be backported

You should just disable debugging for older kernels if this is used.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Add module load print to know where we backported from

For stable kernels this will be more important. I'll soon start
a branch based on new kernel releases so if anyone wants to
base their code only up to a specific point release they can use
that.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>

Fix dev_set_name() for kernel 2.6.23

Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>