ath10k-ct: select mac80211 debugfs support

Trying to compile ath10k-ct without mac80211 debugfs support will result in:
openwrt/build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/linux-ipq806x_generic/ath10k-ct-regular/ath10k-ct-2024.07.30~ac71b14d/ath10k-6.10/wmi.h:8083:2: error: #warning Please enable ATH10K-DEBUGFS kernel option for optimal support for CT firmware. [-Werror=cpp]
 8083 | #warning Please enable ATH10K-DEBUGFS kernel option for optimal support for CT firmware.
      |  ^~~~~~~
cc1: all warnings being treated as errors

So, since the driver itself is saying that debugfs is required, then
lets make ath10k-ct select mac80211 debugfs support which is selected
by default anyway.

Fixes: #16302
Link: https://github.com/openwrt/openwrt/pull/16619
Signed-off-by: Robert Marko <robimarko@gmail.com>

cmake.mk: disable shared libs for host packages

Disable for host to avoid having to use rpath hacks.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16586
Signed-off-by: Robert Marko <robimarko@gmail.com>

mediatek: fix wrong compatible string

The u-boot,env driver does not have layout in compatible.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16616
Signed-off-by: Robert Marko <robimarko@gmail.com>

linux-firmware: intel: update BE200 wifi firmware

Kick to version 92 - that already support station
MLO correctly.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16558
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

hostapd: reload bss if a relevant ifindex changes

This can happen if the bridge or a stacked vlan device gets recreated.
Ensure that hostapd sees the change and handles it gracefully.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

ramips: ER605v2 fix LED function definition

commit 665c2154ef122d10dfffeca95538ebdff82653b5
added support for ER605v2

All three LEDs where configured with LED_FUNCTION_STATUS
which worked for 23.05 and kernel 5.15.

With the upgrade to kernel 6.6 this leads to a name collision.

Therefore the USB and Power LED now use the common.h function
LED_FUNCTION_USB and LED_FUNCTION_POWER respectivly.

* fixes https://github.com/openwrt/openwrt/issues/16596

Link: https://github.com/openwrt/openwrt/pull/16606
Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16606
Signed-off-by: Robert Marko <robimarko@gmail.com>

ramips: use OKLI loader for TP-Link RE200 v1 and RE210 v1

Using OKLI image to fix the booting stuck issue.

Tested with u-boot extracted from TP-Link stock images
"RE200(EU)_V1_171206.zip" and "RE210(US_CA)_V1_171205.zip".

Fixes: https://github.com/openwrt/openwrt/issues/16296
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16473
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ramips: introduce TP-Link v1 header OKLI image recipe

It can be used to workaround the booting stuck issue caused by the
u-boot LZMA decompression error.

The new kernel image structure:
+------+------------------+------------------+---------------+-----------------+
| name | tplink-v1 header | OKLI lzma-loader | uImage header | lzma kernel+dtb |
+------+------------------+------------------+---------------+-----------------+
| size |      0x200       |       0xe00      |     0x40      |     dynamic     |
+------+------------------+------------------+---------------+-----------------+

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16473
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ath10k-ct: switch to version 6.10

The mac80211 driver backport has been updated to version 6.11. Let's
also push ath10k-ct driver forward. The unsupported feature
'NL80211_EXT_FEATURE_ETHTOOL_VDEV_STATS' has been dropped since it
looks like something for debugging and not supported by the mainline.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16514
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel-build.mk: Fix multi-core build warning.

In the case of multi-core compilation, the warning prompts to add a "+" sign.
````
warning: jobserver unavailable: using -j1. Add `+' to parent make rule.
`````
Signed-off-by: Zxl hhyccc <zxlhhy@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16598
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel: ws2812b: use devm for mutex_init

Allows removal of _remove function.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16587
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel: leds-ws2812b: remove sub 6.6 support

5.15 and 6.1 are gone.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16587
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel: leds-ws2812b: use devm functions

Avoids having to free manually.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16587
Signed-off-by: Robert Marko <robimarko@gmail.com>

gemini: apm821xx: Ignore return value of e2fsck

This fixes the build of the gemini and the apm821xx target.
The e2fsck application returns an error code now and that makes the
build fail. The tune2fs command adds an extra option and the e2fsck
should later fix the file system. It is intentionally broken in this
place.

e2fsprogs was patched before to ignore this error.

Fixes: 95e4664b5efc ("tools: e2fsprogs: drop e2fsck patch")
Link: https://github.com/openwrt/openwrt/pull/16607
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

gemini: Use absolute paths for tools

Use the absolute path to access the e2fsprogs applications. It is also
working with relative paths, but this makes sure that we use our
versions.

Link: https://github.com/openwrt/openwrt/pull/16607
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

iproute2: fix tc-tiny build failure

htobe64 usage requires including endian.h, otherwise tc-tiny fails to build.

Fixes: 626236638197 ("iproute2: update to 6.11.0")
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16609
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

rockchip: config-6.6: remove CONFIG_FORTIFY_SOURCE

The symbol CONFIG_FORTIFY_SOURCE is enable in the generic CONFIG
so remove it from the rockchip CONFIG as is conflicts with the default 'y'
Fixes: https://github.com/openwrt/openwrt/issues/16600
Signed-off-by: Leo Barsky <leobrsky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16603
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: bump 6.6 to 6.6.54

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.54

Removed upstreamed:
generic/backport-6.6/780-24-v6.12-r8169-disable-ALDPS-per-default-for-RTL8125.patch[1]
generic/pending-6.6/360-selftests-bpf-portability-of-unprivileged-tests.patch[2]

Manually rebased:
bcm53xx/patches-6.6/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
bmips/patches-6.6/200-mips-bmips-automatically-detect-CPU-frequency.patch

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.54&id=50d062b6cc90c45a0de54e9bd9903c82777d66bf
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.6.54&id=103c0431c7fb4790affea121126840dbfb146341

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3
Run-tested: x86/64/AMD Cezanne, flogic/xiaomi_redmi-router-ax6000-ubootmod, ramips/tplink_archer-a6-v3

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16602
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

tools: mtd-utils: update to 2.2.1

Release notes:
https://lists.infradead.org/pipermail/linux-mtd/2024-September/106193.html

The rbtree implementation was moved, adapted the patches manually.

Link: https://github.com/openwrt/openwrt/pull/16594
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

utils: mtd-utils: update to 2.2.1

Release notes:
https://lists.infradead.org/pipermail/linux-mtd/2024-September/106193.html

Small size increase:
61380 bin/targets/ath79-old/nand/packages/nand-utils_2.2.0-r1_mips_24kc.ipk
92913 bin/targets/ath79-old/nand/packages/ubi-utils_2.2.0-r1_mips_24kc.ipk
61413 bin/targets/ath79-new/nand/packages/nand-utils_2.2.1-r1_mips_24kc.ipk
92640 bin/targets/ath79-new/nand/packages/ubi-utils_2.2.1-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16594
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

iproute2: update to 6.11.0

Release Notes:
https://lore.kernel.org/netdev/20240717090601.20b2871f@hermes.local/T/
https://lwn.net/Articles/990423/

Remove patch `401-bridge-vlan.c-bridge-vlan.c-fix-build-with-gcc-14-on.patch`
because it is upstream now.

Backport two patches to fix build problems in bridge/mst.c

Small size increase:
 38538 bin/packages/mips_24kc-old/base/devlink_6.9.0-r1_mips_24kc.ipk
  7713 bin/packages/mips_24kc-old/base/genl_6.9.0-r1_mips_24kc.ipk
 31875 bin/packages/mips_24kc-old/base/ip-bridge_6.9.0-r1_mips_24kc.ipk
187733 bin/packages/mips_24kc-old/base/ip-full_6.9.0-r1_mips_24kc.ipk
126538 bin/packages/mips_24kc-old/base/ip-tiny_6.9.0-r1_mips_24kc.ipk
  7619 bin/packages/mips_24kc-old/base/nstat_6.9.0-r1_mips_24kc.ipk
 20704 bin/packages/mips_24kc-old/base/rdma_6.9.0-r1_mips_24kc.ipk
 37607 bin/packages/mips_24kc-old/base/ss_6.9.0-r1_mips_24kc.ipk
158909 bin/packages/mips_24kc-old/base/tc-bpf_6.9.0-r1_mips_24kc.ipk
160459 bin/packages/mips_24kc-old/base/tc-full_6.9.0-r1_mips_24kc.ipk
135846 bin/packages/mips_24kc-old/base/tc-tiny_6.9.0-r1_mips_24kc.ipk
 38669 bin/packages/mips_24kc-new/base/devlink_6.11.0-r1_mips_24kc.ipk
  7719 bin/packages/mips_24kc-new/base/genl_6.11.0-r1_mips_24kc.ipk
 32676 bin/packages/mips_24kc-new/base/ip-bridge_6.11.0-r1_mips_24kc.ipk
188920 bin/packages/mips_24kc-new/base/ip-full_6.11.0-r1_mips_24kc.ipk
127313 bin/packages/mips_24kc-new/base/ip-tiny_6.11.0-r1_mips_24kc.ipk
  7612 bin/packages/mips_24kc-new/base/nstat_6.11.0-r1_mips_24kc.ipk
 21065 bin/packages/mips_24kc-new/base/rdma_6.11.0-r1_mips_24kc.ipk
 37726 bin/packages/mips_24kc-new/base/ss_6.11.0-r1_mips_24kc.ipk
158921 bin/packages/mips_24kc-new/base/tc-bpf_6.11.0-r1_mips_24kc.ipk
160510 bin/packages/mips_24kc-new/base/tc-full_6.11.0-r1_mips_24kc.ipk
136352 bin/packages/mips_24kc-new/base/tc-tiny_6.11.0-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16589
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ethtool: update to 6.10

Release Notes:
https://lore.kernel.org/netdev/20240128235634.4ni2lbvzqjlwbgi4@lion.mk-sys.cz/T/
https://lore.kernel.org/netdev/jylgitumxz72a2hfzsujnwvxpkuzcw3wcwebodthtpvtkfgmlp@rfoix5dyh2bg/T/
https://lore.kernel.org/netdev/ssn37ocuhjyx3k5xoq53uvb3voo2qxnwvuwgephb4cc5lbw5ei@5fkqwsfdzlcu/T/

Small size increase:
 34937 bin/packages/mips_24kc-old/base/ethtool_6.6-r1_mips_24kc.ipk
154818 bin/packages/mips_24kc-old/base/ethtool-full_6.6-r1_mips_24kc.ipk
 35780 bin/packages/mips_24kc-new/base/ethtool_6.10-r1_mips_24kc.ipk
157386 bin/packages/mips_24kc-new/base/ethtool-full_6.10-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16590
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

libnl: update to 3.10.0

Changes:
fa05d58e (tag: libnl3_10_0) libnl-3.10.0 release
490ffa07 python: fix flake8 warnings
6fc66dd8 doc: workaround LINK_DOC with empty libnl.dict
914812a9 lib: avoid overflow in computation of s_seq_next
5248e1a4 all: fix and enable "-Wsign-compare" warning
9451842e build: use AC_USE_SYSTEM_EXTENSIONS instead of defining _GNU_SOURCE
20664e1e build: move "-DPGKLIBDIR" and rename
81cab7da build: cleanup defining SYSCONFDIR on command line
cf47571c build: drop unnecessary "-Wno-missing-field-initializers" from default CFLAGS
131008f7 build: add "-Wvla" and "-Wdeclaration-after-statement" to default CFLAGS
7e05b622 lib: add internal _nla_len() helper
32688201 route: treat routes with via nexthops as universe scoped as well
c36c7faa format: reformat "include/base/nl-base-utils.h"
49f78229 tests: add a very basic test for route cache
2ebbc034 tests: add NLTstSelectRoute test helper
d784f2cb tests: set NLTST_IN_CI for not skipping tests accidentally
dcb9e2ef route: add missing priority to route_keygen() debug print
d44505ed tests: add helper to detect availablility of iproute2
774863b4 tests: add helper functions for tests
45a10f96 route: move "struct rtnl_nexthop" to "nl-priv-dynamic-route"
153f213b build: fix "check-progs" target in "Makefile.am"
a1e0b8b2 github: print test-suite.log in case of test failure
3e080631 route: expose nexthop id attribute
401c2488 tests: fix _nltst_object_to_string() to print one line only
529c2ab8 route: drop unused fields from "struct rtnl_route"
71e59e14 build: separate build tests from unit tests
8539b7d3 format: reformat "tests/nl-test-util.h" file
6db85366 route: merge branch 'bisdn:jogo_route_nh_cmp'
861fb809 route: use the new helper function for comparing nexthops
8cf29d7b nexthop: add a identical helper function
7cc72d19 utils: reserve the nl_has_capabiliy numbers for releases 3.10 - 3.12
30da5107 github,clang-format: update fedora version for clang-format
2301992b route: fix IPv6 ecmp route deleted nexthop matching
72e4d73f cache: merge branch 'ievenbach:aurora/cache-mgr-cb'
3381acef cache: use cleanup attribute in nl_cache_mngr_alloc_ex()
32cb9f39 cache: cleanup nl_cache_mngr_alloc_ex()
1dbdc30a cache: allow to allocate cache manager with custom refill socket
18b74e08 tests: test compiling all public headers with C++ compiler
691202bf tests: don't use $COMPILE for building header tests
15d90cbf include: add _NL_NO_WARN_DEPRECATED_HEADER for suppressing warning about deprecated headers
8a5f671a tests: avoid "-Wunused-parameter" warning in build headers test
db1a9d7d route: avoid compiler warning about calloc() arguments in rtnl_netem_set_delay_distribution()
3a43faa1 cache: fix new object in callback v2 on updated objects
46cae1bf socket: fix ubsan complaint about incorrect left-shift in generate_local_port()
96ddcd99 all: merge branch 'th/nl-debug'
13ab0122 github: test with --enable-debug=no configure option
264b244e utils: always define nl_debug_dp
dbe21b8d core: always define statements for NL_DBG()
e592dd89 build: always define NL_DEBUG
58734974 all: use defines for attributes
0c16c9cb route/bison: include "nl-default.h" in lex/yacc files
19d48b0f route: add support for layer 3 filtering on bridges
3646398d route: merge branch 'Cordell-O:main'
e21278ed tests: add test for bridge vlan attributes.
4f324f73 route: add support for vlan filtering on bridge ports.
bf071f2b route: Add support to set ageing time for dynamic bridge table entries
b76c3a5d tests: add unit test for `nl_addr_parse("default", AF_INET6, &addr6)`
8693347f lib/xfrm: add missing #include <time.h>

Small size increase:
   955 bin/packages/mips_24kc-old/base/libnl200_3.9.0-r1_mips_24kc.ipk
 11157 bin/packages/mips_24kc-old/base/libnl-cli200_3.9.0-r1_mips_24kc.ipk
 34896 bin/packages/mips_24kc-old/base/libnl-core200_3.9.0-r1_mips_24kc.ipk
  7698 bin/packages/mips_24kc-old/base/libnl-genl200_3.9.0-r1_mips_24kc.ipk
 25400 bin/packages/mips_24kc-old/base/libnl-nf200_3.9.0-r1_mips_24kc.ipk
148366 bin/packages/mips_24kc-old/base/libnl-route200_3.9.0-r1_mips_24kc.ipk
   956 bin/packages/mips_24kc-new/base/libnl200_3.10.0-r1_mips_24kc.ipk
 11154 bin/packages/mips_24kc-new/base/libnl-cli200_3.10.0-r1_mips_24kc.ipk
 34965 bin/packages/mips_24kc-new/base/libnl-core200_3.10.0-r1_mips_24kc.ipk
  7699 bin/packages/mips_24kc-new/base/libnl-genl200_3.10.0-r1_mips_24kc.ipk
 25385 bin/packages/mips_24kc-new/base/libnl-nf200_3.10.0-r1_mips_24kc.ipk
149852 bin/packages/mips_24kc-new/base/libnl-route200_3.10.0-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16592
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

libxml2: update to 2.13.4

Release Notes:
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.13.0
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.13.1
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.13.2
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.13.3
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.13.4

Small size reduction:
415095 bin/packages/mips_24kc-old/base/libxml2_2.12.6-r1_mips_24kc.ipk
 87175 bin/packages/mips_24kc-old/base/libxml2-dev_2.12.6-r1_mips_24kc.ipk
 20190 bin/packages/mips_24kc-old/base/libxml2-utils_2.12.6-r1_mips_24kc.ipk
398070 bin/packages/mips_24kc-new/base/libxml2_2.13.4-r1_mips_24kc.ipk
 86760 bin/packages/mips_24kc-new/base/libxml2-dev_2.13.4-r1_mips_24kc.ipk
 19479 bin/packages/mips_24kc-new/base/libxml2-utils_2.13.4-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16593
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

libxml2: update to 2.12.9

Release Notes:
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.7
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.8
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.12.9

This fixes:
CVE-2024-34459: Fix buffer overread with xmllint --htmlout
CVE-2024-40896: Fix XXE protection in downstream code

Link: https://github.com/openwrt/openwrt/pull/16593
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

libjson-c: update to 0.18

Release Notes:
https://github.com/json-c/json-c/blob/json-c-0.18-20240915/ChangeLog

This restores ABI compatibility with version 0.16 used in OpenWrt 23.05.

Small size increase:
24263 bin/packages/mips_24kc-old/base/libjson-c5_0.17-r1_mips_24kc.ipk
24403 bin/packages/mips_24kc-new/base/libjson-c5_0.18-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16591
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

strace: Update to version 6.11

Release Notes:
https://github.com/strace/strace/releases/tag/v6.8
https://github.com/strace/strace/releases/tag/v6.9
https://github.com/strace/strace/releases/tag/v6.10
https://github.com/strace/strace/releases/tag/v6.11

Small size increase:
323788 bin/packages/mips_24kc-old/base/strace_6.7-r1_mips_24kc.ipk
336988 bin/packages/mips_24kc-new/base/strace_6.11-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16585
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

valgrind: Update to version 3.23

Release notes:
https://valgrind.org/docs/manual/dist.news.html

The patch `130-fix_arm_arch_detection.patch` was added upstream in
https://sourceware.org/git/?p=valgrind.git;a=commitdiff;h=5bdb86cc9a962f04f2dd3816b7d3a96288b09b72

Replace `010-mips-Fix-new-syscall-numbers.patch` with backport from
upstream.

Backport patch `020-no-member-guest_IP_AT_SYSCALL.patch` to fix a
compile problem on MIPS.

Small size increase:
1527884 bin/packages/mips_24kc-old/base/valgrind_3.22.0-r1_mips_24kc.ipk
3352210 bin/packages/mips_24kc-old/base/valgrind-cachegrind_3.22.0-r1_mips_24kc.ipk
3522982 bin/packages/mips_24kc-old/base/valgrind-callgrind_3.22.0-r1_mips_24kc.ipk
3573577 bin/packages/mips_24kc-old/base/valgrind-drd_3.22.0-r1_mips_24kc.ipk
3647835 bin/packages/mips_24kc-old/base/valgrind-helgrind_3.22.0-r1_mips_24kc.ipk
3383239 bin/packages/mips_24kc-old/base/valgrind-massif_3.22.0-r1_mips_24kc.ipk
  22332 bin/packages/mips_24kc-old/base/valgrind-vgdb_3.22.0-r1_mips_24kc.ipk
1541969 bin/packages/mips_24kc-new/base/valgrind_3.23.0-r1_mips_24kc.ipk
3378595 bin/packages/mips_24kc-new/base/valgrind-cachegrind_3.23.0-r1_mips_24kc.ipk
3548415 bin/packages/mips_24kc-new/base/valgrind-callgrind_3.23.0-r1_mips_24kc.ipk
3592715 bin/packages/mips_24kc-new/base/valgrind-drd_3.23.0-r1_mips_24kc.ipk
3664706 bin/packages/mips_24kc-new/base/valgrind-helgrind_3.23.0-r1_mips_24kc.ipk
3411485 bin/packages/mips_24kc-new/base/valgrind-massif_3.23.0-r1_mips_24kc.ipk
  22869 bin/packages/mips_24kc-new/base/valgrind-vgdb_3.23.0-r1_mips_24kc.ipk

Link: https://github.com/openwrt/openwrt/pull/16584
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

mac80211: backport upstream DFS fixes

Mostly MLO related

Signed-off-by: Felix Fietkau <nbd@nbd.name>

ramips: dts: DNA EX400 has redundant type u-boot environment

Set compatible string and specify redundant type U-boot environment.

Fixes: fea2264d9fdd ("ramips: mt7621: Add DNA Valokuitu Plus EX400")
Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Link: https://github.com/openwrt/openwrt/pull/16573
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

mt7621: enable CONFIG_MTD_UBI_NVMEM, CONFIG_NVMEM_LAYOUT_U_BOOT_ENV

Enable above drivers for mt7621 targets. They are needed for retrieving a MAC
address stored in a U-boot environment residing on an UBI volume.

Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi>
Link: https://github.com/openwrt/openwrt/pull/16573
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

mac80211: update to version 6.11.2

Adds a number of minor fixes

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: add missing eeprom file for mt7992

Signed-off-by: Felix Fietkau <nbd@nbd.name>

base-files: configure LED when added

Currently LED configuration is only carried out once during boot.
Apply LED configuration also with a hotplug call when a new LED gets
added later.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

base-files: /etc/sysctl.conf: clarity in comment

Make it clear to users that they should not place a custom file
in /etc/sysctl.d/ for their values and expect it to survive a
reimage.

This change is needed since these directories (/etc/foo.d/) are
generally where such files are placed on other distros.

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16543
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

audit: update to 3.1.5

- Remove upstreamed patch: 0001-Implicit-builtin-functions.patch
- Fix package license info.
- Use git mirror instead of GitHub generated tarball.

Signed-off-by: Yanase Yuki <dev@zpc.st>
Link: https://github.com/openwrt/openwrt/pull/16388
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

meta: VS Code: add "Git: Always Sign Off" setting

VS Code setting to auto signoff commits.
This also corresponds to our GitHub Web workflow.

Signed-off-by: Andrey Butirsky <butirsky@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16540
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ath79: rb91x-key: replace fwnode with pdev

There's no specific fwnode handling here. Simpler to just use pdev.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16506
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ath79: rb91x-key: use more devm

Use devm_gpiochip_add_data to get rid of the remove function. No need
for it.

Also use dev_err_probe to simplify the error path and avoid having to
handle -EPROBE_DEFER manually.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16506
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

x86: generic: config-6.6: refresh config

Add CONFIG_ARCH_CONFIGURES_CPU_MITIGATIONS=y which was introduced
back in April of this year[1]

1. https://github.com/torvalds/linux/commit/ce0abef6a1d540acef85068e0e82bdf1fbeeb0e9

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16535
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ramips: modernize ralink i2c driver

Use more devm and remove _remove function.

Remove owner as the kernel sets it automatically.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16546
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: ubnt-ledbar: return directly

Removes ret variable.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16508
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: ubnt-ledbar: use dev_err_probe

Handles EPROBE_DEFER and simplifies the code.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16508
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

ramips: rename interfaces for tplink er605v2

Currently eth1 (which is the first "lan" interface) doesn't work on this device.
During boot the following can be seen in logs:

```
[    2.252804] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
[    2.266060] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 19
[    2.277889] mtk_soc_eth 1e100000.ethernet eth1: mediatek frame engine at 0xbe100000, irq 19
...
[    2.355157] mt7530-mdio mdio-bus:1f: MT7530 adapts as multi-chip module
[    2.390312] mt7530-mdio mdio-bus:1f: configuring for fixed/rgmii link mode
[    2.398597] mt7530-mdio mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx
[    2.403872] mt7530-mdio mdio-bus:1f eth1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=21)
[    2.416988] mtk_soc_eth 1e100000.ethernet eth0: error -17 registering interface eth1
[    2.426973] mt7530-mdio mdio-bus:1f eth2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=22)
[    2.440996] mt7530-mdio mdio-bus:1f eth3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=23)
[    2.454405] mt7530-mdio mdio-bus:1f eth4 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7530 PHY] (irq=24)
[    2.467198] mtk_soc_eth 1e100000.ethernet eth0: entered promiscuous mode
[    2.474117] DSA: tree 0 setup
...
[    6.820998] mtk_soc_eth 1e100000.ethernet dsa: renamed from eth0
[    6.919904] mtk_soc_eth 1e100000.ethernet wan: renamed from eth1
```

So the problem seems to be the fact that built-in gmacs get default
names (eth0/eth1) and are renamed after switch ports are initialized. This means
that when switch port with name `eth1` is brought up this name is still used by
gmac1 causing switch port's init to fail.

This patch just renames the ports to avoid name collision.
Note: this will break existing configs for this device because it renames all
the ports. This should not be major problem because this device doesn't have a
proper OEM image and is only flashable with serial access, meaning there should
not be many users.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15865
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

wifi-scripts: Fix typo in EHT320 name

All other places name it EHT320.

Fixes: b478b7b1f7b9 ("wifi-scripts: detect and configure EHT")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

kernel: packages: kmod-pstore: remove deprecated Kconfig options

The following options no longer exist in 6.6:

PSTORE_COMPRESS_DEFAULT
PSTORE_DEFLATE_COMPRESS
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/fs/pstore/Kconfig?h=v6.6

Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/16579
Signed-off-by: Robert Marko <robimarko@gmail.com>

mt76: mark mt7925 11BE capable

Build hostapd with 11BE support for
both mt7925e and mt7925u.

Signed-off-by: Marek Puzyniak <marek.puzyniak@holisticon.pl>
Link: https://github.com/openwrt/openwrt/pull/16571
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

mac80211: mark ath12k 80211BE capable

Build hostapd with 80211BE suport.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16571
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

generic: backport upstream r8169 patches

These patches have been added in linux v6.12 release.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

realtek: add support for Linksys LGS310C

Hardware specification
----------------------

* RTL8380M SoC, 1 MIPS 4KEc core @ 500MHz
* 256MB DRAM
* 32MB NOR Flash
* 8 x 10/100/1000BASE-T ports
* 2 x SFP ports
* Power LED, Fault LED
* Reset button on front panel
* UART (115200 8N1) via populated standard pin header marked JP1

TODO: The SFP ports use a shared SCL GPIO that the driver cannot handle.
The left SFP port (lan9) is defined and fully functional while the laser
on the right SFP port (lan10) is off by default.

UART pinout
-----------

[o]ooo|JP1
 | ||`------ GND
 | |`------- RX
 | `-------- TX
 `---------- Vcc (3V3)

Installation using OEM webinterface
-----------------------------------

1. Make sure you are running OEM firmware in secondary slot
2. Install squashfs-factory.imag to primary slot by upload via http

Installation using serial interface
-----------------------------------

1. Press "a" "c" "p" during message "Enter correct key to stop autoboot"
2. Load image with "upgrade runtime <TFTP IP>:squashfs-sysupgrade.bin" command
3. Switch to primary slot with "setsys bootpartition 0"
4. Store config with "savesys"
5. Boot the image with `boota` command

Dual-boot with stock firmware using writable u-boot-env
-------------------------------------------------------

From stock to OpenWrt / primary image 1 (CLI as admin):
   - > boot system image1
   - > reboot

From OpenWrt to stock / boot image 2: (shell as root)
   - # fw_setsys bootpartition 1
   - # reboot

Debrick using serial interface
------------------------------

1. Press "a" "c" "p" during message "Enter correct key to stop autoboot"
2. Load vendor image with "upgrade runtime <TFTP IP>:LGS310xxxxx.imag"
3. switch to primary partition "setsys bootpartition 0"
4. safe config "savesys"

Further documentation
---------------------
See https://openwrt.org/toh/linksys/lgs352c

It has been developed and tested on device with v1 revision.

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/16068
[Add missing 'w' in name of firmware partition]
Signed-off-by: Sander Vanheule <sander@svanheule.net>

wifi-scripts: add better defaults for 6 GHz interop

Indicate stationary AP and set default 6G regulatory power type to indoor

Signed-off-by: Felix Fietkau <nbd@nbd.name>

base-files: set root password if present inside board.json

Add code to set plain password or put the hash into /etc/shadow.

Signed-off-by: John Crispin <john@phrozen.org>

base-files: add timezone to UCI during config_generate

Signed-off-by: John Crispin <john@phrozen.org>

dropbear: add a uci-defaults script for loading authorized keys

Write the ssh authorized key to /etc/dropbear/ssh_authorized_keys if present
inside boad.json.

Signed-off-by: John Crispin <john@phrozen.org>

wifi-scripts: populate default wifi credentials and country code from board.json

Signed-off-by: John Crispin <john@phrozen.org>

uboot-envtools: add a board.d script to load defaults from the environment

This allows loading default wifi credentials, passwords and ssh keys on
firstboot.

Signed-off-by: John Crispin <john@phrozen.org>

uboot-envtools: add fw_loadenv tool

This tool will load the uboot environment to /var/run/uboot-env/. This allows
more efficient use when accessing multiple variables.

Signed-off-by: John Crispin <john@phrozen.org>

base-files: execute uboot-env script before calling config_generate

This allows /etc/board.d/* scripts to use values from the uboot environment.

Signed-off-by: John Crispin <john@phrozen.org>

base-files: uci-defaults: allow setting the number of MACs a radio can use

Introduce new uci-default functions:
- ucidef_set_wireless_mac_count [count]

Signed-off-by: John Crispin <john@phrozen.org>

base-files: uci-defaults: allow setting default timezone

Introduce new uci-default functions:
- ucidef_set_timezone TZ

Signed-off-by: John Crispin <john@phrozen.org>

base-files: uci-defaults: allow setting default credentials and ssh keys

Introduce new uci-default functions:
     - ucidef_set_root_password_hash [hash]
     - ucidef_set_root_password_plain [plaintext]
     - ucidef_set_ssh_authorized_key [ssh key]

Signed-off-by: John Crispin <john@phrozen.org>

base-files: uci-defaults: allow setting wireless defaults

Introduce new uci-default functions:
 - ucidef_set_wireless band ssid [encryption] [key]
 - ucidef_set_country cc

They are supposed to be used in /etc/board.d/* scripts to define
board-specific defaults for wireless.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: John Crispin <john@phrozen.org>

hostapd: send a notification via ubus when CSA completed

Signed-off-by: John Crispin <john@phrozen.org>

hostapd: add ifname to generic ubus notify code

Signed-off-by: John Crispin <john@phrozen.org>

hostapd: add ifname and vlan_id to sta-authorized notifications

Signed-off-by: John Crispin <john@phrozen.org>

hostapd: add the ifname to ubus events

Signed-off-by: John Crispin <john@phrozen.org>

umdns: update to latest HEAD

fbaca4b cache: improve update call by doing a full refresh probe
93c9036 dns: reply to A/AAAA questions for additional hostnames

Signed-off-by: John Crispin <john@phrozen.org>

wifi-scripts: detect and configure EHT

Check if EHT/11BE supported, configure in board.json
and config/wireless.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>

mt76: mark mt7996e 11BE capable

Build hostapd with 11BE support.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>

wifi-scripts: mac80211.sh: enable EHT320

For EHT320 we should also enable HE160.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>

wifi-scripts: mac80211.sh: allow EHT* sets

Allow to configure 80211BE.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>

hostapd: fix build when 80211BE enabled

In file included from hostapd-wpad-basic-mbedtls/hostapd-2024.03.09~695277a5/src/ap/ubus.h:11,
                 from hostapd-wpad-basic-mbedtls/hostapd-2024.03.09~695277a5/src/ap/hostapd.h:21,
                 from main.c:26:
hostapd-2024.03.09~695277a5/src/ap/sta_info.h: In function 'ap_sta_is_mld':
hostapd-2024.03.09~695277a5/src/ap/sta_info.h:425:20: error: invalid use of undefined type 'struct hostapd_data'
  425 |         return hapd->conf->mld_ap && sta && sta->mld_info.mld_sta;
      |                    ^~

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>

hostapd: add CONFIG_DRIVER_11BE_SUPPORT

Add option to enable 802.11BE support.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com>

ucode: update to latest HEAD

b610860 Merge pull request #223 from jow-/nl80211-add-eht-attributes
4e0456b nl80211: add EHT mac/phy capabilities
c938ee9 Merge pull request #218 from jonasjelonek/add-ioctl
56ebeec fs: add ioctl() file method
d0f423b Merge pull request #221 from mikma/fix-getenv
86f1121 lib: test if call to getenv() destroys environ
7af80d9 lib: use copy of environ pointer in getenv()
6ea37c8 ci: bump upload-artifact to v3
26d7292 Merge pull request #214 from jow-/ucode-test-runner
fbabec4 tests: replace test runner shell script with ucode implementation
e391ef5 main: prevent invalid memory access when executing empty stdin
b391fd7 Merge pull request #211 from jow-/hwsim-support
bc13278 nl80211: support the MAC80211_HWSIM netlink protocol family
f5b5a58 nl80211: drop unused structure members from connection context
f6ea6fc nl80211: support conversion from/to struct array attributes
115a84f nl80211: gracefully handle illegal netlink error code

Signed-off-by: John Crispin <john@phrozen.org>

iwinfo: update to latest HEAD

714e419 iwinfo: fix EHT mode reporting for STA interfaces
7eed433 devices: add device id for MediaTek MT7996e

Signed-off-by: John Crispin <john@phrozen.org>

mediatek: change the the default SUBTARGET to filogic

Signed-off-by: John Crispin <john@phrozen.org>

mac80211: do not pass a stopped vif to the driver on get_txpower

Fixes potential crashes in various drivers when checking the status of
interfaces that are down

Signed-off-by: Felix Fietkau <nbd@nbd.name>

kernel: bump 6.6 to 6.6.53

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.6.53

All patches automatically rebased.

Build system: x86/64
Build-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: x86/64/AMD Cezanne, flogic/glinet_gl-mt6000, flogic/xiaomi_redmi-router-ax6000-ubootmod

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/16554
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

lantiq: backport latest upstream patches

Backport patch that fixes memory disclosure in packet padding.
The downstream driver supports statistics, so when a packet
cannot be padded the statistics of dropped packets are incremented.
The other patches do not introduce any functional changes.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/16563
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

bmips: fix kernel panic caused by missing CBR address

The cbr-reg DTS property uses a wrong name causing the RAC kernel
panic again on BCM6358 BCM6368 boards.

Use the correct cbr-reg name property.

Fixes: 7c9644a7b5 ("bmips: backport upstreamed RAC patches")
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16561
Signed-off-by: Robert Marko <robimarko@gmail.com>

wifi-scripts: wifi-detect.uc: skip null entries on nl80211 phy dump

This can happen on incomplete device probe

Signed-off-by: Felix Fietkau <nbd@nbd.name>

generic: backport ("net: free_netdev: exit earlier if dummy")

Currently, when removing ath11k or any other driver that uses dummy netdev
kernel will crash with:
[  365.004961] ------------[ cut here ]------------
[  365.004992] kernel BUG at net/core/dev.c:10979!
[  365.008642] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[  365.012898] Modules linked in: pppoe ppp_async nft_fib_inet nf_flow_table_inet ath11k_ahb(O) ath11k(O) pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_c
[  365.064794] CPU: 3 PID: 3896 Comm: procd Tainted: G           O       6.6.52 #0
[  365.087031] Hardware name: QNAP 301w (DT)
[  365.094058] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  365.098229] pc : free_netdev+0x164/0x1a0
[  365.104994] lr : free_netdev+0xec/0x1a0
[  365.109159] sp : ffffffc081d33b90
[  365.112718] x29: ffffffc081d33b90 x28: ffffff80039d3c00 x27: ffffff800307f000
[  365.116199] x26: ffffff800538a000 x25: ffffff8005388000 x24: ffffff800538a4c0
[  365.123317] x23: 00000000000023a4 x22: ffffff8005388f68 x21: ffffff8004e37050
[  365.130434] x20: ffffff8004e37000 x19: ffffff8004e36ee8 x18: 0000000000000152
[  365.137552] x17: 63775f357636712e x16: 3030303030646320 x15: ffffffc081436e20
[  365.144670] x14: ffffff80033f261c x13: 00000000000000d9 x12: 0000000000000002
[  365.151789] x11: 0000000000000000 x10: 00000000000008a0 x9 : ffffffc081d33980
[  365.158906] x8 : ffffff80039d4500 x7 : ffffff803fdda6c0 x6 : 0000000000000007
[  365.166025] x5 : 0000000000000000 x4 : 00000000000000c1 x3 : 00000000000001f4
[  365.173143] x2 : ffffff803fdd4b78 x1 : ffffff8004e37050 x0 : 0000000000000005
[  365.180261] Call trace:
[  365.187370]  free_netdev+0x164/0x1a0
[  365.189630]  0xffffffc079b373f0
[  365.193447]  0xffffffc079b374c0
[  365.196311]  platform_shutdown+0x24/0x34
[  365.199438]  device_shutdown+0x160/0x268
[  365.203605]  kernel_restart+0x40/0xc0
[  365.207510]  __do_sys_reboot+0x104/0x220
[  365.211070]  __arm64_sys_reboot+0x24/0x30
[  365.215063]  invoke_syscall.constprop.0+0x5c/0x108
[  365.218971]  do_el0_svc+0x40/0xc8
[  365.223655]  el0_svc+0x30/0xb8
[  365.227041]  el0t_64_sync_handler+0x120/0x12c
[  365.229995]  el0t_64_sync+0x178/0x17c
[  365.234424] Code: f94013f5 a8c37bfd d50323bf d65f03c0 (d4210000)
[  365.238072] ---[ end trace 0000000000000000 ]---

Wireless backports include alloc_netdev_dummy() backport but they dont have
the required free_netdev change first, so backport it.

Fixes: #16531
Fixes: 384d079fd876 ("mac80211: update to version 6.11")
Link: https://github.com/openwrt/openwrt/pull/16549
Signed-off-by: Robert Marko <robimarko@gmail.com>

mt76: add missing eeprom for mt7992 firmware

Avoid the following errors:
[    9.219272] mt7996e 0000:01:00.0: Direct firmware load for mediatek/mt7996/mt7992_eeprom_2i5i.bin failed with error -2
[    9.229975] mt7996e 0000:01:00.0: Falling back to sysfs fallback for: mediatek/mt7996/mt7992_eeprom_2i5i.bin

Fixes: 2f7d22d ("mt76: update to Git HEAD (2024-09-29)")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>

mac80211: reorder patches in subsys/

Close some patch numbering gaps left behind by updates

Signed-off-by: Felix Fietkau <nbd@nbd.name>

tools/elfutils: prevent invalid include of stack binary

In some versions of Xcode, some C++ header has an include
of the standard C++ header "stack" while "." is in the include paths
which can conflict with the binary "stack" built by elfutils.
This leads to a decode error as the binary is interpreted as text.

Add an arbitrary dependency between stack and the C++ program.

Signed-off-by: Michael Pratt <mcpratt@pm.me>

mediatek: filogic: select MT7996 2+3+3 firmware

Select MT7996 2+3+3 firmware for the Adtran SmartRG SDG-8733A device
and also add it to the image for the BPi-R4 which supports both,
BE19000 (4+5+5) as well as BE14000 (2+3+3) Wi-Fi 7 modules.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

mt76: remove leftover api update patch

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: fix typo in last update

Fix broken dependency for mt7992 firmware

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: update to Git HEAD (2024-09-29)

1231d45dcb5e wifi: mt76: mt7915: check devm_kasprintf() returned value
042082027b3f wifi: mt76: mt7921: Check devm_kasprintf() returned value
4a95c1a81eee wifi: mt76: Avoid multiple -Wflex-array-member-not-at-end warnings
5fdb1841f726 wifi: mt76: mt7925: fix a potential association failure upon resuming
eeb51b527377 wifi: mt76: mt7925: convert comma to semicolon
d4b3b302ceb9 wifi: mt76: mt7615: check devm_kasprintf() returned value
922e515bd8e0 wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc
bec8cb851d99 wifi: mt76: mt7925: replace chan config with extend txpower config for clc
d10ce9d65dac wifi: mt76: remove mt76_calculate_default_rate()
6685a2f4c217 wifi: mt76: mt7996: remove phy->monitor_vif
a2a9d9826277 wifi: mt76: do not increase mcu skb refcount if retry is not supported
059342ca6a68 wifi: mt76: move mt76_tm_policy to from testmode.h to mt76.h
8bef11443290 wifi: mac80211: inform the low level if drv_stop() is a suspend
4b16d2bfdcbd wifi: mac80211: handle color change per link
4529cddb6718 wifi: mt76: mt7996: extend flexibility of mt7996_mcu_get_eeprom()
4364571e4b2b wifi: mt76: mt7996: add support for more variants
8c86aa304ea1 wifi: mt76: mt7996: set correct background radar capability
addfbd141863 firmware: add latest mt7996 + mt7992 firmware
5ba4981f8b92 wifi: mt76: mt792x: add P2P_DEVICE support
dc32780c7fcd wifi: mt76: mt7921s: fix a potential firmware freeze during startup
7b5d653ea90e wifi: mt76: mt7925: fix off by one in mt7925_load_clc()
1e57d2da94c9 wifi: mt76: mt7615: Convert comma to semicolon
7aca94abac47 wifi: mt76: mt7915: fix slot time for 5/6GHz
e3e6d490ab90 wifi: mt76: mt7915: Fix mesh scan on MT7916 DBDC
ee693260c521 firmware: move mt7996 firmware to the right place
867accf4f4aa wifi: mt76: mt7996: Add eht radiotap tlv
7c4d6e403381 wifi: mt76: Fix EHT NSS radiotap reporting.
71c3949fa8ac wifi: mt76: mt7921: fix a potential scan no APs
61641da04c9e mt76: mt76u_vendor_request: Do not print error messages when -EPROTO
680bc70f161f wifi: mt76: mt7921: fix using incorrect group cipher after disconnection.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

yafut: fix build on non-linux systems

Signed-off-by: Felix Fietkau <nbd@nbd.name>

ramips: mtk_eth_soc: don't allocate 4 queues

This driver does not support more than 1 queue.

Fixes: ba24b94e0b8 ("ramips: use more devm in mtk_eth_soc")
Signed-off-by: Rosen Penev <rosenp@gmail.com>

scripts: config.guess: update to 2024-07-27

This script hasn't seen an update in multiple years, update it to the
latest version provided upstream.

Both `config.guess` and `config.sub` are copied from upstream[1] and not
modified.

The full changelog is available within the upstream repository[1].

[1]: https://git.savannah.gnu.org/git/config.git

Link: https://github.com/openwrt/openwrt/pull/16536
Signed-off-by: Robert Marko <robimarko@gmail.com>

kernel: make 'no port node found' output a debug message

There are cases where an unavailable port is not an error, making
this error message a false-positive. The kernel log is flooded with
the messages like:
  OF: graph: no port node found in /soc@0/bus@42000000/i2c@42530000/usb-typec@50

Silence this message by making it a debug message.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/16524
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

CI: labeler: Add new targets

Some new targets were added, but we did not add them to the labeler.
Add them now.

Link: https://github.com/openwrt/openwrt/pull/16454
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

CI: labeler: remove bcm63xx

Some packages are now used by other targets, move them over

Fixes: 5cd8e037b506 ("bcm63xx: drop target")
Link: https://github.com/openwrt/openwrt/pull/16454
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

tools: fakeroot: update to 1.36

The type 'id_t' check has been moved to configure.ac in upstream commit:
819063eb4d27 ("test for id_t with autoconf instead of blind typedef, fixes FTBFS on FreeBSD")

changelog:
https://salsa.debian.org/clint/fakeroot/-/blob/e4780b1aad6fae0be1868a76cc7ffa6149afa912/debian/changelog

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/16530
Signed-off-by: Nick Hainke <vincent@systemli.org>

base-files: emmc: invalidate kernel image while rootfs is being written

Some setups have alternate boot actions in case the main OS fails to
boot. These can include a secondary copy of the OS, a recovery OS, a
fallback to TFTP boot, etc.

This commit invalidates the kernel image while rootfs is being written
which, if a sysupgrade is interrupted, will trigger an alternate boot
action in devices that support it. This results in safer sysupgrades.

Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>

mac80211: remove outdated patches

The only supported kernel in the main branch now is version 6.6. It's
time to clean up these useless codes and patches.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

mac80211: fix build error on kernel 6.6

The virtio_find_vqs() ABI has been changed since the 6.11 kernel.
Switch back to using the old ABI to fix the build error:

../mac80211-regular/backports-6.11/drivers/net/wireless/virtual/mac80211_hwsim.c: In function 'init_vqs':
../mac80211-regular/backports-6.11/drivers/net/wireless/virtual/mac80211_hwsim.c:6632:31: error: array type has incomplete element type 'struct virtqueue_info'
 6632 |         struct virtqueue_info vqs_info[HWSIM_NUM_VQS] = {
      |                               ^~~~~~~~
../mac80211-regular/backports-6.11/drivers/net/wireless/virtual/mac80211_hwsim.c:6637:16: error: too few arguments to function 'virtio_find_vqs'
 6637 |         return virtio_find_vqs(vdev, HWSIM_NUM_VQS,
      |                ^~~~~~~~~~~~~~~
In file included from ../mac80211-regular/backports-6.11/drivers/net/wireless/virtual/mac80211_hwsim.c:38:
./include/linux/virtio_config.h:224:5: note: declared here
  224 | int virtio_find_vqs(struct virtio_device *vdev, unsigned nvqs,
      |     ^~~~~~~~~~~~~~~
../mac80211-regular/backports-6.11/drivers/net/wireless/virtual/mac80211_hwsim.c:6632:31: error: unused variable 'vqs_info' [-Werror=unused-variable]
 6632 |         struct virtqueue_info vqs_info[HWSIM_NUM_VQS] = {
      |                               ^~~~~~~~
../mac80211-regular/backports-6.11/drivers/net/wireless/virtual/mac80211_hwsim.c:6639:1: error: control reaches end of non-void function [-Werror=return-type]
 6639 | }
      | ^

Signed-off-by: Shiji Yang <yangshiji66@qq.com>

ath79: Refresh kernel patches

Make the patches apply cleanly again.

Fixes: 774badd8a840 ("kernel: fix crashes after linearizing fraglist GSO skbs")
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/16517
Signed-off-by: Robert Marko <robimarko@gmail.com>