Hans Dedecker [Mon, 23 Apr 2018 07:50:31 +0000 (09:50 +0200)]
Merge pull request #5933 from alinnastac/rp-pppoe-improved-init-scripts
rp-pppoe: improve init scripts
Alin Nastac [Thu, 19 Apr 2018 06:33:17 +0000 (08:33 +0200)]
rp-pppoe: add support for logical interface names and fix interface triggers
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Jaehoon You [Mon, 9 Apr 2018 07:00:59 +0000 (16:00 +0900)]
coova-chilli: change PKG_MAINTAINER
Signed-off-by: Jaehoon You <teslamint@gmail.com>
Jaehoon You [Thu, 25 May 2017 05:44:24 +0000 (14:44 +0900)]
coova-chilli: switch to procd
Signed-off-by: Jaehoon You <teslamint@gmail.com>
Hannu Nyman [Sun, 22 Apr 2018 20:08:46 +0000 (23:08 +0300)]
Merge pull request #5954 from lucize/clamup
clamav: update to 0.100.0
Lucian Cristian [Sun, 22 Apr 2018 18:36:34 +0000 (21:36 +0300)]
clamav: update to 0.100.0
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Hannu Nyman [Sun, 22 Apr 2018 09:35:02 +0000 (12:35 +0300)]
Merge pull request #5919 from diizzyy/patch-3
utils/ncdu: Update to 1.13
Hannu Nyman [Sun, 22 Apr 2018 09:33:15 +0000 (12:33 +0300)]
Merge pull request #5950 from diizzyy/patch-4
utils/tio: Update to 1.30
Hannu Nyman [Sun, 22 Apr 2018 09:24:52 +0000 (12:24 +0300)]
Merge pull request #5941 from zhaojh329/wifidog-ng
wifidog-ng: Update to 1.5.6
Hannu Nyman [Sun, 22 Apr 2018 09:24:32 +0000 (12:24 +0300)]
Merge pull request #5944 from chris5560/master
ddns-scripts: fixes "sed: no previous regexp"
Nikos Mavrogiannopoulos [Sun, 22 Apr 2018 09:08:53 +0000 (11:08 +0200)]
ocserv: updated to 0.12.0
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
Daniel Engberg [Sun, 22 Apr 2018 07:05:48 +0000 (09:05 +0200)]
utils/tio: Update to 1.30
Update tio to 1.30
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Christian Schoenebeck [Sat, 21 Apr 2018 10:11:46 +0000 (12:11 +0200)]
ddns-scripts: fixes "sed: no previous regexp"
Rewritten Pull for #5885
When ran from the command line, the script prints
error messages like below. They are caused by supplying
empty "$password" and "$URL_PASS" for some log messages
like "130822 : Detect local IP on 'interface'".
The fix is to check if the values are not empty before running
through sed.
/etc/init.d/ddns start
sed: no previous regexp
Reported by Marc Benoit <marcb62185@gmail.com>
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
Daniel Golle [Fri, 20 Apr 2018 20:53:58 +0000 (22:53 +0200)]
gnurl: depend on libidn2 instead of libidn
Package configure script decided to use libidn2 already now that it
became available. This triggered a dependency error:
Package libgnurl is missing dependencies for the following libraries:
libidn2.so.0
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Michael Heimpold [Fri, 20 Apr 2018 20:18:25 +0000 (22:18 +0200)]
php7-pecl-libevent: update to latest commit
This includes several minor bugfixes.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Jianhui Zhao [Thu, 19 Apr 2018 12:59:35 +0000 (20:59 +0800)]
wifidog-ng: Update to 1.5.6
Signed-off-by: Jianhui Zhao <jianhuizhao329@gmail.com>
Zhong Jianxin [Thu, 12 Apr 2018 13:33:50 +0000 (21:33 +0800)]
acme: Add acme-dnsapi package
Signed-off-by: Zhong Jianxin <azuwis@gmail.com>
Zhong Jianxin [Wed, 11 Apr 2018 04:05:59 +0000 (12:05 +0800)]
acme: Support DNS mode
Tested with dynu.com ddns.
Install acme-dnsapi:
# opkg install acme-dnsapi
Example `/etc/config/acme`:
config acme
option state_dir '/etc/acme'
option account_email email@example.org'
option debug '0'
config cert 'foo'
option enabled '1'
option use_staging '1'
option keylength '2048'
option update_uhttpd '0'
option dns 'dns_dynu'
list domains 'foo.dynu.com'
list domains '*.foo.dynu.com'
list credentials 'Dynu_ClientId="xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"'
list credentials 'Dynu_Secret="yyyyyyyyyyyyyyyyyyyyyyyyy"'
Run:
# /etc/init.d/acme start
Signed-off-by: Zhong Jianxin <azuwis@gmail.com>
Jo-Philipp Wich [Thu, 19 Apr 2018 07:04:30 +0000 (09:04 +0200)]
bcp38: add init script
This commit adds a simple procd init script for bcp38 with the sole purpose
to register a configuration change trigger for /etc/config/bcp38.
The change will allow for automatic firewall reloads triggered by invoking
/sbin/reload_config or through ubus config change events emitted by LuCI.
With the init script in place and started, calling
ubus call service event '{"type":"config.change","data":{"package":"bcp38"}}'
or
/sbin/reload_config
will issue an /etc/init.d/firewall reload if /etc/config/bcp38 has been
modified since the last reload_config call.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Alin Nastac [Thu, 19 Apr 2018 06:30:07 +0000 (08:30 +0200)]
rp-pppoe: support for enabled uci parameters
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Alin Nastac [Thu, 19 Apr 2018 06:17:29 +0000 (08:17 +0200)]
rp-ppoe: fix init script indentation and add STOP level
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Michael Heimpold [Wed, 18 Apr 2018 20:38:31 +0000 (22:38 +0200)]
php7-pecl-propro: update to 2.1.0
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Michael Heimpold [Wed, 18 Apr 2018 20:29:19 +0000 (22:29 +0200)]
php7-pecl-http: fix build if libidn and libidn2 are both available
We now select libidn2 as dependency, but libidn -if available-
is also linked against.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Michael Heimpold [Wed, 18 Apr 2018 19:35:04 +0000 (21:35 +0200)]
libgpiod: update to 1.0.1
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Michael Heimpold [Wed, 18 Apr 2018 19:28:24 +0000 (21:28 +0200)]
mmc-utils: update to latest git version
Also drop obsolete patch.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Hannu Nyman [Wed, 18 Apr 2018 09:51:37 +0000 (12:51 +0300)]
Merge pull request #5929 from iamperson347/getdns-libidn2-update
getdns: Package update to replace libidn support with libidn2
David Mora [Tue, 17 Apr 2018 22:10:59 +0000 (18:10 -0400)]
getdns: Package update to replace libidn support with libidn2
Package update to replace libidn support with libidn2
Signed-off-by: David Mora <iamperson347+public@gmail.com>
Daniel Golle [Tue, 17 Apr 2018 19:13:14 +0000 (21:13 +0200)]
Merge pull request #5923 from aparcar/bmx7-dnsupdate
bmx7-dnsupdate: add package
Hannu Nyman [Tue, 17 Apr 2018 16:57:42 +0000 (19:57 +0300)]
Merge pull request #5921 from ClaymorePT/boost_1.67.0
boost: Package Version Update -> 1.67.0
Hannu Nyman [Tue, 17 Apr 2018 16:56:51 +0000 (19:56 +0300)]
Merge pull request #5928 from mstorchak/tmux
tmux: update to 2.7
Maxim Storchak [Tue, 17 Apr 2018 16:17:34 +0000 (19:17 +0300)]
tmux: update to 2.7
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
Ted Hess [Tue, 17 Apr 2018 15:24:50 +0000 (11:24 -0400)]
Merge pull request #5857 from diizzyy/sound-lame
sound/lame: Fix optimization
Hannu Nyman [Tue, 17 Apr 2018 14:03:29 +0000 (17:03 +0300)]
Merge pull request #5922 from diizzyy/utils-pcsctools
utils/pcsc-tools: Update to 1.5.3
Paul Spooren [Mon, 16 Apr 2018 08:34:26 +0000 (17:34 +0900)]
bmx7-dnsupdate: add package
Makes it easy to address bmx7 shorids and hostnames with ping, ssh, etc.
Both are stored in /tmp/hosts/ and so loaded by dnsmasq.
Instead of using a cron job which triggers the bmx7 deamon every so and
so, inotifywait is used to see creation or deletion of originators in
/var/run/bmx7/json/originators/
Signed-off-by: Paul Spooren <spooren@informatik.uni-leipzig.de>
Marko Ratkaj [Mon, 16 Apr 2018 13:07:56 +0000 (13:07 +0000)]
Merge pull request #5806 from sartura/mozilla_iot_gateway
node-mozilla-iot-gateway: add package
Dirk Brenken [Mon, 16 Apr 2018 13:03:59 +0000 (15:03 +0200)]
Merge pull request #5918 from doscott/easydnsfix
<ddns-scripts>: Add OK to valid easydns response.
Danny Scott [Mon, 16 Apr 2018 12:46:17 +0000 (09:46 -0300)]
ddns-scripts: Add OK to valid easydns resonse.
Signed-off-by: Danny Scott <doscott@gmail.com>'
Marko Ratkaj [Fri, 23 Mar 2018 12:50:44 +0000 (13:50 +0100)]
node-mozilla-iot-gateway: add new package
Signed-off-by: Arturo Rinaldi <arty.net2@gmail.com>
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
Dirk Brenken [Mon, 16 Apr 2018 11:18:45 +0000 (13:18 +0200)]
Merge pull request #5908 from mwarning/zerotier
zerotier: fix segfault on ARM
Daniel Engberg [Mon, 16 Apr 2018 07:27:22 +0000 (09:27 +0200)]
utils/pcsc-tools: Update to 1.5.3
Update pcsc-tools to 1.5.3
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Carlos Miguel Ferreira [Mon, 16 Apr 2018 00:53:38 +0000 (01:53 +0100)]
boost: Package Version Update -> 1.67.0
This package update provides two new libraries
- Contract (compiled library) [1]: Contract programming for C++.
All contract programming features are supported: Subcontracting,
class invariants, postconditions (with old and return values),
preconditions, customizable actions on assertion failure (e.g.,
terminate or throw), optional compilation and checking of
assertions, etc, from Lorenzo Caminiti.
- HOF (header-only library) [2]:
Higher-order functions for C++, from Paul Fultz II.
More info can be found at the usual place [3].
[1]: https://www.boost.org/libs/contract
[2]: https://www.boost.org/libs/hof
[3]: https://www.boost.org/users/history/version_1_67_0.html
Signed-off-by: Carlos Miguel Ferreira <carlosmf.pt@gmail.com>
Daniel Golle [Sun, 15 Apr 2018 20:53:27 +0000 (22:53 +0200)]
inotify-tools: add packages
Add packages for inotifywait, inotifywatch and libinotifytools.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Rosen Penev [Tue, 27 Mar 2018 01:21:33 +0000 (18:21 -0700)]
acme: Switch to normal releases + other fixes.
As acme.sh has releases, switch to using those. Update the version accordingly.
Also rearranged some stuff in the hope that uscan will start tracking releases instead of git commits. Makefile is more simple as a result.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Daniel Engberg [Sat, 14 Apr 2018 16:47:55 +0000 (18:47 +0200)]
utils/ncdu: Update to 1.13
Update ncdu to 1.13
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Hannu Nyman [Sat, 14 Apr 2018 07:33:14 +0000 (10:33 +0300)]
Merge pull request #5914 from Shulyaka/master
postfix: version update to 3.3.0
Hannu Nyman [Sat, 14 Apr 2018 07:32:17 +0000 (10:32 +0300)]
Merge pull request #5911 from val-kulkov/subversion-package
subversion: update to 1.10.0
Hannu Nyman [Fri, 13 Apr 2018 20:51:54 +0000 (23:51 +0300)]
Merge pull request #5913 from wvdakker/master
Shorewall: Bump to version 5.1.12.4
W. van den Akker [Fri, 13 Apr 2018 20:02:33 +0000 (22:02 +0200)]
Shorewall6: Bump to version 5.1.12.4
Signed-off-by: W. van den Akker <wvdakker@wilsoft.nl>
W. van den Akker [Fri, 13 Apr 2018 20:00:22 +0000 (22:00 +0200)]
Shorewall: Bump to version 5.1.12.4
Signed-off-by: W. van den Akker <wvdakker@wilsoft.nl>
W. van den Akker [Fri, 13 Apr 2018 19:58:42 +0000 (21:58 +0200)]
Shorewall6-lite: Bump to version 5.1.12.4
Signed-off-by: W. van den Akker <wvdakker@wilsoft.nl>
W. van den Akker [Fri, 13 Apr 2018 19:57:12 +0000 (21:57 +0200)]
Shorewall-lite: Bump to version 5.1.12.4
Signed-off-by: W. van den Akker <wvdakker@wilsoft.nl>
W. van den Akker [Fri, 13 Apr 2018 19:55:25 +0000 (21:55 +0200)]
Shorewall-core: Bump to version 5.1.12.4
Signed-off-by: W. van den Akker <wvdakker@wilsoft.nl>
Val Kulkov [Fri, 13 Apr 2018 16:02:59 +0000 (12:02 -0400)]
subversion: update to 1.10.0
Update from 1.9.7 to 1.10.0.
Signed-off-by: Val Kulkov <val.kulkov@gmail.com>
champtar [Thu, 12 Apr 2018 22:20:45 +0000 (15:20 -0700)]
Merge pull request #5854 from diizzyy/libs-sqlite
libs/sqlite: Update to 3.23.1
Daniel Engberg [Sun, 1 Apr 2018 09:30:05 +0000 (11:30 +0200)]
libs/sqlite: Update to 3.23.1
Update sqlite to 3.23.1
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Moritz Warning [Thu, 12 Apr 2018 15:54:59 +0000 (17:54 +0200)]
zerotier: bump package version
Signed-off-by: Moritz Warning <moritzwarning@web.de>
Moritz Warning [Thu, 12 Apr 2018 15:48:32 +0000 (17:48 +0200)]
zerotier: show message when section disabled
Signed-off-by: Moritz Warning <moritzwarning@web.de>
Moritz Warning [Thu, 12 Apr 2018 15:48:14 +0000 (17:48 +0200)]
zerotier: abort on zerotier-idtool error
Signed-off-by: Moritz Warning <moritzwarning@web.de>
Moritz Warning [Thu, 12 Apr 2018 15:43:36 +0000 (17:43 +0200)]
zerotier: log errors
Signed-off-by: Moritz Warning <moritzwarning@web.de>
Moritz Warning [Thu, 12 Apr 2018 15:43:13 +0000 (17:43 +0200)]
zerotier: remove broken option interface
Signed-off-by: Moritz Warning <moritzwarning@web.de>
Moritz Warning [Thu, 12 Apr 2018 15:41:42 +0000 (17:41 +0200)]
zerotier: disable -pie to avoid segfault
Signed-off-by: Moritz Warning <moritzwarning@web.de>
Florian Fainelli [Thu, 12 Apr 2018 18:36:37 +0000 (11:36 -0700)]
Merge pull request #5827 from neheb/patch-4
iptraf-ng: Fix Source URLs
Hannu Nyman [Thu, 12 Apr 2018 10:08:42 +0000 (13:08 +0300)]
Merge pull request #5900 from salzmdan/master
knot: update to 2.6.6
Dirk Brenken [Thu, 12 Apr 2018 09:37:49 +0000 (11:37 +0200)]
Merge pull request #5904 from TDT-AG/pr/
20180412-mwna3-fix-ubus
mwan3: in ubus rpcd script fix shell local issue
Florian Eckert [Thu, 12 Apr 2018 09:22:26 +0000 (11:22 +0200)]
net/mwan3: update version to 2.6.14
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Florian Eckert [Thu, 12 Apr 2018 08:27:00 +0000 (10:27 +0200)]
mwan3: in ubus rpcd script fix shell local issue
To fix the shell local issue in the ubus mwan3 rpcd shell script, move
the switch case statment into a function.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Philip Prindeville [Thu, 12 Apr 2018 03:10:17 +0000 (21:10 -0600)]
Merge pull request #5366 from brianjmurrell/dhcrelay-update
dhcrelay4: add support for up/downstream interfaces
Brian J. Murrell [Sun, 7 Jan 2018 15:44:19 +0000 (10:44 -0500)]
dhcrelay4: add support for up/downstream interfaces
dhcrelay has the ability to monitor interfaces for requests
in a single direction only rather than listening to all
interfaces for requests.
Doing this allows one to suppress the duplication of having
the relay forward requests from the same network that the
DHCP server is on.
Signed-off-by: Brian J. Murrell <brian@interlinx.bc.ca>
Dirk Brenken [Wed, 11 Apr 2018 18:34:20 +0000 (20:34 +0200)]
Merge pull request #5896 from allaudet/improve-autossh-config
autossh: add an 'enabled' option within the uci configuration file
Adrià Llaudet [Wed, 11 Apr 2018 18:22:17 +0000 (20:22 +0200)]
autossh: add an 'enabled' option within the uci configuration file
In a tool like this one, you really want an option to establish if the service
should start or not by default on boot time, especially when its configuration
file has to be customized by the user.
In the configuration file, the new 'enabled' option is setted to '0' by default
since the configuration provided by default will not be the one finally used.
In the init script, the new 'enabled' option is setted to '1' by default in
order to support the previous configuration file behaviour.
Signed-off-by: Adrià Llaudet <adria.llaudet@gmail.com>
Marko Ratkaj [Wed, 11 Apr 2018 12:46:15 +0000 (12:46 +0000)]
Merge pull request #5901 from sartura/openzwave_gcc_and_install_fix
openzwave: fix gcc7 compile and remove bad patch
Marko Ratkaj [Wed, 11 Apr 2018 09:04:42 +0000 (11:04 +0200)]
openzwave: fix gcc7 compile and remove bad patch
Patch 903-no-examples.patch removes MinOZW binary. This is wrong since
install section of openzwave is still using it. We can either remove the
patch or remove install section for openzwave. It seems people are using
this binary so we remove the patch.
After removing the patch the following issue appears with gcc7:
cc1plus: error: -Wformat-security ignored without -Wformat
This is resolved by adding the following to Makefile
TARGET_CPPFLAGS+=-Wno-format -Wno-format-security
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
Daniel Salzman [Wed, 11 Apr 2018 11:03:46 +0000 (13:03 +0200)]
knot: update to 2.6.6
Signed-off-by: Daniel Salzman <daniel.salzman@nic.cz>
Kevin Darbyshire-Bryant [Mon, 2 Apr 2018 21:17:22 +0000 (23:17 +0200)]
libidn2: v2.0.4 Add to repo
Add libidn2 & idn2 tool to repo
Heavily based on PR by Daniel Engberg <daniel.engberg.lists@pyret.net>
Added idn2 tool & heavily based on existing idn Makefile.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Philip Prindeville [Tue, 10 Apr 2018 18:33:26 +0000 (12:33 -0600)]
Merge pull request #5891 from pprindeville/add-per-host-dhcp-options
isc-dhcp: allow hosts to have dhcp options
Dirk Brenken [Tue, 10 Apr 2018 18:19:57 +0000 (20:19 +0200)]
Merge pull request #5893 from mwarning/zerotier
zerotier: fix 'unknown operand' error
Moritz Warning [Tue, 10 Apr 2018 08:05:55 +0000 (10:05 +0200)]
zerotier: fix 'unknown operand' error
Signed-off-by: Moritz Warning <moritzwarning@web.de>
Hannu Nyman [Tue, 10 Apr 2018 08:02:58 +0000 (11:02 +0300)]
Merge pull request #5892 from mlichvar/chrony-no-sechash
chrony: disable sechash support
Miroslav Lichvar [Tue, 10 Apr 2018 06:54:48 +0000 (08:54 +0200)]
chrony: disable sechash support
Don't use the Nettle library (or NSS, libtomcrypt) even if it is
available.
Signed-off-by: Miroslav Lichvar <mlichvar0@gmail.com>
Philip Prindeville [Tue, 10 Apr 2018 03:01:33 +0000 (21:01 -0600)]
isc-dhcp: allow hosts to have dhcp options
Sometimes it's necessary to set per-host options like:
list dhcp_option 'option:always-broadcast,true'
for hosts that don't understand unicast replies. There might
be other options you might want to set on a per-host basis,
such as extensions-path, dhcp-message-text, etc.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Hannu Nyman [Mon, 9 Apr 2018 14:32:33 +0000 (17:32 +0300)]
Merge pull request #5890 from wodu/linuxptp_maint
Bump linuxptp to version 1.9.2
Wojciech Dubowik [Mon, 9 Apr 2018 12:02:00 +0000 (14:02 +0200)]
Bump linuxptp to version 1.9.2
Signed-off-by: Wojciech Dubowik <klute99@gmail.com>
Philip Prindeville [Sun, 8 Apr 2018 22:40:26 +0000 (16:40 -0600)]
Merge pull request #5887 from pprindeville/fix-dhcpd.init-typeof
Fix dhcpd.init typeof
Philip Prindeville [Sun, 8 Apr 2018 22:07:01 +0000 (16:07 -0600)]
isc-dhcp: fix typeof regex for IP address pattern
Missing backslash in "\d+" for last digit of dotted quad.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Philip Prindeville [Fri, 30 Mar 2018 15:14:40 +0000 (09:14 -0600)]
isc-dhcp: make files/ consistent by flattening
Some /etc/config-destined files are in files/ and suffixed with
.conf while others are in files/etc/config/ which isn't consistent.
Put everything in files/ and call it good.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Peter Wagner [Sun, 8 Apr 2018 17:13:59 +0000 (19:13 +0200)]
openssh: update to 7.7p1
Signed-off-by: Peter Wagner <tripolar@gmx.at>
Peter Wagner [Sun, 8 Apr 2018 17:13:18 +0000 (19:13 +0200)]
glib2: update to 2.56.1
Signed-off-by: Peter Wagner <tripolar@gmx.at>
Daniel Golle [Sun, 8 Apr 2018 11:17:56 +0000 (13:17 +0200)]
Merge pull request #5859 from diizzyy/utils-ccid
utils/ccid: Update to 1.4.29
Rosen Penev [Tue, 27 Mar 2018 01:40:16 +0000 (18:40 -0700)]
znc: Update to 1.6.6 + HTTPS.
Fixed links and switched to HTTPS as the site defaults to it.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Tue, 27 Mar 2018 02:13:13 +0000 (19:13 -0700)]
unrar: Update to 5.6.1.
Change links to HTTPS and add CPE_ID.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Daniel Engberg [Sun, 1 Apr 2018 15:13:38 +0000 (17:13 +0200)]
utils/pcsc-lite: Update URLs
New URLs
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Florian Eckert [Fri, 6 Apr 2018 10:40:15 +0000 (12:40 +0200)]
net/mwan3: update version to 2.6.13
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Florian Eckert [Thu, 5 Apr 2018 11:15:18 +0000 (13:15 +0200)]
net/mwan3: also send connected action on initial_state offline
Move action into startup section will fix this.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Florian Eckert [Wed, 21 Mar 2018 13:13:57 +0000 (14:13 +0100)]
net/mwan3: add logging on ping success and fail
Add logging information during state change on ping success or fail
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Denis Shulyaka [Sat, 7 Apr 2018 21:37:49 +0000 (00:37 +0300)]
postfix: version update to 3.3.0
Signed-off-by: Denis Shulyaka <Shulyaka@gmail.com>
Daniel Engberg [Sun, 1 Apr 2018 09:20:40 +0000 (11:20 +0200)]
nmap: Update to 7.70
Update nmap suite to 7.70
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Hannu Nyman [Thu, 5 Apr 2018 18:11:53 +0000 (21:11 +0300)]
Merge pull request #5872 from diizzyy/patch-1
utils/tio: Update to 1.29
Dirk Brenken [Thu, 5 Apr 2018 12:41:36 +0000 (14:41 +0200)]
Merge pull request #5870 from dibdot/travelmate
travelmate: update 1.2.0
Dirk Brenken [Wed, 4 Apr 2018 12:30:30 +0000 (14:30 +0200)]
travelmate: update 1.2.0
* union 'automatic' and 'trigger' mode, now much more responsive
if an uplink suddenly disappears
* tidy up (disable) travelmate related uplink connections
if you disable the service
* change default config ('trm_automatic' removal)
* documentation update
* LuCI: remove needless 'automatic' and 'trigger' options
plus small fixes
Signed-off-by: Dirk Brenken <dev@brenken.org>
Daniel Engberg [Wed, 4 Apr 2018 15:52:39 +0000 (17:52 +0200)]
utils/tio: Update to 1.29
Update tio to 1.29
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
projects / feed / packages.git / log