Erez Alfasi [Tue, 14 May 2019 10:55:22 +0000 (13:55 +0300)]
net/mlx5e: TX, Improve performance under GSO workload
__netdev_tx_sent_queue() was introduced by:
commit
3e59020abf0f ("net: bql: add __netdev_tx_sent_queue()")
BQL counters should be updated without flipping/caring about
BQL status, if the current skb has xmit_more set.
Using __netdev_tx_sent_queue() avoids messing with BQL stop
flag, increases performance on GSO workload by keeping
doorbells to the minimum required and also sparing atomic
operations.
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Oz Shlomo [Thu, 18 Apr 2019 13:45:29 +0000 (16:45 +0300)]
net/mlx5e: Use termination table for VLAN push actions
HW does not support push VLAN action in the RX direction (packets
arriving from the wire). The FW works around this limitation by haripining
the packet. The hairpin workaround applies only when the push VLAN action
is specified in a termination table, assuring that there are no actions
following the haripin.
Instantiate termination table for push VLAN actions. Re-use identical
terminating tables for increased HW cache efficiency.
Signed-off-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Yevgeny Kliteynik [Thu, 4 Apr 2019 00:37:36 +0000 (03:37 +0300)]
net/mlx5e: Geneve, Add support for encap/decap flows offload
Add HW offloading support for flows with Geneve encap/decap.
Notes about decap flows with Geneve TLV Options:
- Support offloading of 32-bit options data only
- At any given time, only one combination of class/type parameters
can be offloaded, but the same class/type combination can have
many different flows offloaded with different 32-bit option data
- Options with value of 0 can't be offloaded
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Yevgeny Kliteynik [Sun, 14 Apr 2019 14:50:01 +0000 (17:50 +0300)]
net/mlx5e: Rearrange tc tunnel code in a modular way
Rearrange tc tunnel code so that it would be easy to add future tunnels:
- Define tc tunnel object with the fields and callbacks that any
tunnel must implement.
- Define tc UDP tunnel object for UDP tunnels, such as VXLAN
- Move each tunnel code (GRE, VXLAN) to its own separate file
- Rewrite tc tunnel implementation in a general way - using only
the objects and their callbacks.
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Yevgeny Kliteynik [Tue, 12 Feb 2019 11:31:00 +0000 (13:31 +0200)]
net/mlx5e: Geneve, Keep tunnel info as pointer to the original struct
In mlx5e encap entry structure, IP tunnel info data structure is copied
by value. This approach worked till now, but it breaks when there are
encapsulation options, such as in case of Geneve.
These options are stored in the structure that is allocated adjacent to
the IP tunnel info struct, and not pointed at by any field in that struct.
Therefore, when copying the struct by value, we loose the address of the
original struct and can't get to the encapsulation options.
Fix the problem by storing the pointer to the tunnel info data instead.
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Yevgeny Kliteynik [Wed, 30 Jan 2019 15:21:55 +0000 (17:21 +0200)]
net/mlx5: Geneve, Manage Geneve TLV options
Use Geneve TLV Options object to manage the flex parser matching
on the 32-bit options data.
When the first flow with a certain class/type values is requested to
be offloaded, create a FW object with FW command (Geneve TLV Options
general object) and start counting the number of flows using this object.
During this time, any request with a different class/type values will
fail to be offloaded.
Once the refcount reaches 0, destroy the TLV options general object,
and can now offload a flow with any class/type parameters.
Geneve TLV Options object is added to core device.
It is currently used to manage Geneve TLV options general
object allocation in FW and its reference counting only.
In the future it will also be used for managing geneve ports
by registering callbacks for ndo_udp_tunnel_add/del.
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Yevgeny Kliteynik [Wed, 30 Jan 2019 13:52:35 +0000 (15:52 +0200)]
net/mlx5e: Enable setting multiple match criteria for flow group
When filling in flow spec match criteria, to allow previous
modifications of the match criteria, use "|=" rather than "=".
Tunnel options are parsed before the match criteria of the offloaded
flow are being set. If the the flow that we're about to offload has
encapsulation options, the flow group might need to match on additional
criteria.
For Geneve, an additional flow group matching parameter should
be used - misc3. The appropriate bit in the match criteria is set
while parsing the tunnel options, so the criteria value shouldn't
be overwritten.
This is a pre-step for supporting Geneve TLV options offload.
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Tonghao Zhang [Mon, 6 May 2019 18:28:37 +0000 (11:28 -0700)]
net/mlx5e: Allow matching only enc_key_id/enc_dst_port for decapsulation action
In some case, we don't care the enc_src_ip and enc_dst_ip, and
if we don't match the field enc_src_ip and enc_dst_ip, we can use
fewer flows in hardware when revice the tunnel packets. For example,
the tunnel packets may be sent from different hosts, we must offload
one rule for each host.
$ tc filter add dev vxlan0 protocol ip parent ffff: prio 1 \
flower dst_mac 00:11:22:33:44:00 \
enc_src_ip Host0_IP enc_dst_ip 2.2.2.100 \
enc_dst_port 4789 enc_key_id 100 \
action tunnel_key unset action mirred egress redirect dev eth0_1
$ tc filter add dev vxlan0 protocol ip parent ffff: prio 1 \
flower dst_mac 00:11:22:33:44:00 \
enc_src_ip Host1_IP enc_dst_ip 2.2.2.100 \
enc_dst_port 4789 enc_key_id 100 \
action tunnel_key unset action mirred egress redirect dev eth0_1
If we support flows which only match the enc_key_id and enc_dst_port,
a flow can process the packets sent to VM which (mac 00:11:22:33:44:00).
$ tc filter add dev vxlan0 protocol ip parent ffff: prio 1 \
flower dst_mac 00:11:22:33:44:00 \
enc_dst_port 4789 enc_key_id 100 \
action tunnel_key unset action mirred egress redirect dev eth0_1
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Vu Pham [Thu, 4 Apr 2019 15:27:33 +0000 (18:27 +0300)]
net/mlx5e: Generalize vport type in vport representor
Beside the special vports (PF/uplink/ecpf), the rest of the vports
are similar.
Remove vf_ prefix from function and variable names.
This patch does not change any functionality.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Saeed Mahameed [Fri, 31 May 2019 19:37:24 +0000 (12:37 -0700)]
Merge branch 'mlx5-next' of git://git./linux/kernel/git/mellanox/linux
This series provides some low level updates for mlx5 driver needed for
both rdma and netdev trees.
1) Termination flow steering table bits and hardware definitions.
2) Introduce the core dump HW access registers definitions.
3) Refactor and cleans-up VF representors functions handlers.
4) Renames host_params bits to function_changed bits and add the
support for eswitch functions change event in the eswitch general case.
(for both legacy and switchdev modes).
5) Potential error pointer dereference in error handling
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Parav Pandit [Wed, 29 May 2019 22:50:41 +0000 (22:50 +0000)]
{IB,net}/mlx5: Constify rep ops functions pointers
Currently for every representor type and for every single vport,
representer function pointers copy is stored even though they don't
change from one to other vport.
Additionally priv data entry for the rep is not passed during
registration, but its copied. It is used (set and cleared) by the user
of the reps.
As we want to scale vports, to simplify and also to split constants
from data,
1. Rename mlx5_eswitch_rep_if to mlx5_eswitch_rep_ops as to match _ops
prefix with other standard netdev, ibdev ops.
2. Constify the IB and Ethernet rep ops structure.
3. Instead of storing copy of all rep function pointers, store copy
per eswitch rep type.
4. Split data and function pointers to mlx5_eswitch_rep_ops and
mlx5_eswitch_rep_data.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Parav Pandit [Wed, 29 May 2019 22:50:39 +0000 (22:50 +0000)]
{IB, net}/mlx5: No need to typecast from void* to mlx5_ib_dev*
Avoid typecasting from void* to mlx5_ib_dev* or mlx5e_rep_priv*
as it is not needed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Vu Pham [Wed, 29 May 2019 22:50:37 +0000 (22:50 +0000)]
net/mlx5: E-Switch, Honor eswitch functions changed event cap
Whenever device supports eswitch functions changed event, honor
such device setting. Do not limit it to ECPF.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Vu Pham [Wed, 29 May 2019 22:50:34 +0000 (22:50 +0000)]
net/mlx5: E-Switch, Replace host_params event with functions_changed event
To support sriov on a E-Switch manager, num_vfs are queried
to the firmware whenever E-Switch manager is notified by
esw_functions_changed event.
Replace host_params event with esw_functions_changed event that reflects
more appropriate naming.
While at it, also correct num_vfs type from int to u16 as expected by
the function mlx5_esw_query_functions().
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Eli Britstein [Wed, 29 May 2019 22:50:29 +0000 (22:50 +0000)]
net/mlx5: Introduce termination table bits
Termination table is a flow table with a termination flag. The flag
allows the firmware to assume that the the specified actions are the last
actions list. This assumption allows the FW to safely perform potential
looping logic (e.g. hairpin). Introduce the bits for this attribute.
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Moshe Shemesh [Wed, 29 May 2019 22:50:24 +0000 (22:50 +0000)]
net/mlx5: Add core dump register access HW bits
Add Firmware core dump registers and HW definitions.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
David S. Miller [Fri, 31 May 2019 17:49:43 +0000 (10:49 -0700)]
Merge git://git./linux/kernel/git/davem/net
The phylink conflict was between a bug fix by Russell King
to make sure we have a consistent PHY interface mode, and
a change in net-next to pull some code in phylink_resolve()
into the helper functions phylink_mac_link_{up,down}()
On the dp83867 side it's mostly overlapping changes, with
the 'net' side removing a condition that was supposed to
trigger for RGMII but because of how it was coded never
actually could trigger.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Fri, 31 May 2019 09:15:26 +0000 (11:15 +0200)]
netfilter: nf_conntrack_bridge: fix CONFIG_IPV6=y
This patch fixes a few problems with CONFIG_IPV6=y and
CONFIG_NF_CONNTRACK_BRIDGE=m:
In file included from net/netfilter/utils.c:5:
include/linux/netfilter_ipv6.h: In function 'nf_ipv6_br_defrag':
include/linux/netfilter_ipv6.h:110:9: error: implicit declaration of function 'nf_ct_frag6_gather'; did you mean 'nf_ct_attach'? [-Werror=implicit-function-declaration]
And these too:
net/ipv6/netfilter.c:242:2: error: unknown field 'br_defrag' specified in initializer
net/ipv6/netfilter.c:243:2: error: unknown field 'br_fragment' specified in initializer
This patch includes an original chunk from wenxu.
Fixes: 764dd163ac92 ("netfilter: nf_conntrack_bridge: add support for IPv6")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Yuehaibing <yuehaibing@huawei.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 31 May 2019 04:11:22 +0000 (21:11 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix OOPS during nf_tables rule dump, from Florian Westphal.
2) Use after free in ip_vs_in, from Yue Haibing.
3) Fix various kTLS bugs (NULL deref during device removal resync,
netdev notification ignoring, etc.) From Jakub Kicinski.
4) Fix ipv6 redirects with VRF, from David Ahern.
5) Memory leak fix in igmpv3_del_delrec(), from Eric Dumazet.
6) Missing memory allocation failure check in ip6_ra_control(), from
Gen Zhang. And likewise fix ip_ra_control().
7) TX clean budget logic error in aquantia, from Igor Russkikh.
8) SKB leak in llc_build_and_send_ui_pkt(), from Eric Dumazet.
9) Double frees in mlx5, from Parav Pandit.
10) Fix lost MAC address in r8169 during PCI D3, from Heiner Kallweit.
11) Fix botched register access in mvpp2, from Antoine Tenart.
12) Use after free in napi_gro_frags(), from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (89 commits)
net: correct zerocopy refcnt with udp MSG_MORE
ethtool: Check for vlan etype or vlan tci when parsing flow_rule
net: don't clear sock->sk early to avoid trouble in strparser
net-gro: fix use-after-free read in napi_gro_frags()
net: dsa: tag_8021q: Create a stable binary format
net: dsa: tag_8021q: Change order of rx_vid setup
net: mvpp2: fix bad MVPP2_TXQ_SCHED_TOKEN_CNTR_REG queue value
ipv4: tcp_input: fix stack out of bounds when parsing TCP options.
mlxsw: spectrum: Prevent force of 56G
mlxsw: spectrum_acl: Avoid warning after identical rules insertion
net: dsa: mv88e6xxx: fix handling of upper half of STATS_TYPE_PORT
r8169: fix MAC address being lost in PCI D3
net: core: support XDP generic on stacked devices.
netvsc: unshare skb in VF rx handler
udp: Avoid post-GRO UDP checksum recalculation
net: phy: dp83867: Set up RGMII TX delay
net: phy: dp83867: do not call config_init twice
net: phy: dp83867: increase SGMII autoneg timer duration
net: phy: dp83867: fix speed 10 in sgmii mode
net: phy: marvell10g: report if the PHY fails to boot firmware
...
Linus Torvalds [Fri, 31 May 2019 04:05:23 +0000 (21:05 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The fixes are still trickling in for arm64, but the only really
significant one here is actually fixing a regression in the botched
module relocation range checking merged for -rc2.
Hopefully we've nailed it this time.
- Fix implementation of our set_personality() system call, which
wasn't being wrapped properly
- Fix system call function types to keep CFI happy
- Fix siginfo layout when delivering SIGKILL after a kernel fault
- Really fix module relocation range checking"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: use the correct function type for __arm64_sys_ni_syscall
arm64: use the correct function type in SYSCALL_DEFINE0
arm64: fix syscall_fn_t type
signal/arm64: Use force_sig not force_sig_fault for SIGKILL
arm64/module: revert to unsigned interpretation of ABS16/32 relocations
arm64: Fix the arm64_personality() syscall wrapper redirection
Linus Torvalds [Fri, 31 May 2019 03:52:40 +0000 (20:52 -0700)]
Merge tag 'for-5.2-rc2-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes for bugs reported by users, fuzzing tools and
regressions:
- fix crashes in relocation:
+ resuming interrupted balance operation does not properly clean
up orphan trees
+ with enabled qgroups, resuming needs to be more careful about
block groups due to limited context when updating qgroups
- fsync and logging fixes found by fuzzing
- incremental send fixes for no-holes and clone
- fix spin lock type used in timer function for zstd"
* tag 'for-5.2-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix race updating log root item during fsync
Btrfs: fix wrong ctime and mtime of a directory after log replay
Btrfs: fix fsync not persisting changed attributes of a directory
btrfs: qgroup: Check bg while resuming relocation to avoid NULL pointer dereference
btrfs: reloc: Also queue orphan reloc tree for cleanup to avoid BUG_ON()
Btrfs: incremental send, fix emission of invalid clone operations
Btrfs: incremental send, fix file corruption when no-holes feature is enabled
btrfs: correct zstd workspace manager lock to use spin_lock_bh()
btrfs: Ensure replaced device doesn't have pending chunk allocation
Linus Torvalds [Fri, 31 May 2019 03:35:48 +0000 (20:35 -0700)]
Merge tag 'configfs-for-5.2-2' of git://git.infradead.org/users/hch/configfs
Pull configs fix from Christoph Hellwig:
- fix a use after free in configfs_d_iput (Sahitya Tummala)
* tag 'configfs-for-5.2-2' of git://git.infradead.org/users/hch/configfs:
configfs: Fix use-after-free when accessing sd->s_dentry
Linus Torvalds [Fri, 31 May 2019 02:58:59 +0000 (19:58 -0700)]
Merge tag 'sound-5.2-rc3' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"No big surprises here, just a few device-specific fixes.
HD-audio received several fixes for Acer, Dell, Huawei and other
laptops as well as the workaround for the new Intel chipset. One
significant one-liner fix is the disablement of the node-power saving
on Realtek codecs, which may potentially cover annoying bugs like the
background noises or click noises on many devices.
Other than that, a fix for FireWire bit definitions, and another fix
for LINE6 USB audio bug that was discovered by syzkaller"
* tag 'sound-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: fireface: Use ULL suffixes for 64-bit constants
ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops
ALSA: line6: Assure canceling delayed work at disconnection
ALSA: hda - Force polling mode on CNL for fixing codec communication
ALSA: hda/realtek - Enable micmute LED for Huawei laptops
ALSA: hda/realtek - Set default power save node to 0
ALSA: hda/realtek - Check headset type by unplug and resume
Linus Torvalds [Thu, 30 May 2019 23:33:37 +0000 (16:33 -0700)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Don't expose the SiFive clk driver on non-RISCV architectures
- Fix some bits describing clks in the imx8mm driver
- Always call clk domain code in the TI driver so non-legacy platforms
work
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: ti: clkctrl: Fix clkdm_clk handling
clk: imx: imx8mm: fix int pll clk gate
clk: sifive: restrict Kconfig scope for the FU540 PRCI driver
Willem de Bruijn [Thu, 30 May 2019 22:01:21 +0000 (18:01 -0400)]
net: correct zerocopy refcnt with udp MSG_MORE
TCP zerocopy takes a uarg reference for every skb, plus one for the
tcp_sendmsg_locked datapath temporarily, to avoid reaching refcnt zero
as it builds, sends and frees skbs inside its inner loop.
UDP and RAW zerocopy do not send inside the inner loop so do not need
the extra sock_zerocopy_get + sock_zerocopy_put pair. Commit
52900d22288ed ("udp: elide zerocopy operation in hot path") introduced
extra_uref to pass the initial reference taken in sock_zerocopy_alloc
to the first generated skb.
But, sock_zerocopy_realloc takes this extra reference at the start of
every call. With MSG_MORE, no new skb may be generated to attach the
extra_uref to, so refcnt is incorrectly 2 with only one skb.
Do not take the extra ref if uarg && !tcp, which implies MSG_MORE.
Update extra_uref accordingly.
This conditional assignment triggers a false positive may be used
uninitialized warning, so have to initialize extra_uref at define.
Changes v1->v2: fix typo in Fixes SHA1
Fixes: 52900d22288e7 ("udp: elide zerocopy operation in hot path")
Reported-by: syzbot <syzkaller@googlegroups.com>
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 May 2019 22:17:05 +0000 (15:17 -0700)]
Merge branch '100GbE' of git://git./linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2019-05-30
This series contains updates to ice driver only.
Brett continues his work with interrupt handling by fixing an issue
where were writing to the incorrect register to disable all VF
interrupts.
Tony consolidates the unicast and multicast MAC filters into a single
new function.
Anirudh adds support for virtual channel vector mapping to receive and
transmit queues. This uses a bitmap to associate indicated queues with
the specified vector. Makes several cosmetic code cleanups, as well as
update the driver to align with the current specification for managing
MAC operation codes (opcodes).
Paul adds support for Forward Error Correction (FEC) and also adds the
ethtool get and set handlers to modify FEC parameters.
Bruce cleans up the driver code to fix a number of issues, such as,
reducing the scope of some local variables, reduce the number of
de-references by changing a local variable and reorder the code to
remove unnecessary "goto's".
Dave adds switch rules to be able to handle LLDP packets and in the
process, fix a couple of issues found, like stop treating DCBx state of
"not started" as an error and stop hard coding the filter information
flag to transmit.
Jacob updates the driver to allow for more granular debugging by
developers by using a distinct separate bit for dumping firmware logs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kevin 'ldir' Darbyshire-Bryant [Thu, 30 May 2019 17:10:43 +0000 (17:10 +0000)]
net: sched: act_ctinfo: minor size optimisation
Since the new parameter block is initialised to 0 by kzmalloc we don't
need to mask & clear unused operational mode bits, they are already
unset.
Drop the pointless code.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier [Thu, 30 May 2019 14:08:40 +0000 (16:08 +0200)]
ethtool: Check for vlan etype or vlan tci when parsing flow_rule
When parsing an ethtool flow spec to build a flow_rule, the code checks
if both the vlan etype and the vlan tci are specified by the user to add
a FLOW_DISSECTOR_KEY_VLAN match.
However, when the user only specified a vlan etype or a vlan tci, this
check silently ignores these parameters.
For example, the following rule :
ethtool -N eth0 flow-type udp4 vlan 0x0010 action -1 loc 0
will result in no error being issued, but the equivalent rule will be
created and passed to the NIC driver :
ethtool -N eth0 flow-type udp4 action -1 loc 0
In the end, neither the NIC driver using the rule nor the end user have
a way to know that these keys were dropped along the way, or that
incorrect parameters were entered.
This kind of check should be left to either the driver, or the ethtool
flow spec layer.
This commit makes so that ethtool parameters are forwarded as-is to the
NIC driver.
Since none of the users of ethtool_rx_flow_rule_create are using the
VLAN dissector, I don't think this qualifies as a regression.
Fixes: eca4205f9ec3 ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by: Pablo Neira Ayuso <pablo@gnumonks.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 May 2019 22:02:33 +0000 (15:02 -0700)]
Merge branch 'complex-c45-phys'
Heiner Kallweit says:
====================
net: phy: improve handling of more complex C45 PHY's
This series tries to address few problematic aspects raised by
Russell. Concrete example is the Marvell 88x3310, the changes
should be helpful for other complex C45 PHY's too.
v2:
- added patch enabling interrupts also if phylib state machine
isn't started
- removed patch dealing with the double link status read
This one needs little bit more thinking and will go separately.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 30 May 2019 13:11:06 +0000 (15:11 +0200)]
net: phy: export phy_queue_state_machine
We face the issue that link change interrupt and link status may be
reported by different PHY layers. As a result the link change
interrupt may occur before the link status changes.
Export phy_queue_state_machine to allow PHY drivers to specify a
delay between link status change interrupt and link status check.
v2:
- change jiffies parameter type to unsigned long
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Suggested-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 30 May 2019 13:10:06 +0000 (15:10 +0200)]
net: phy: add callback for custom interrupt handler to struct phy_driver
The phylib interrupt handler handles link change events only currently.
However PHY drivers may want to use other interrupt sources too,
e.g. to report temperature monitoring events. Therefore add a callback
to struct phy_driver allowing PHY drivers to implement a custom
interrupt handler.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Suggested-by: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 30 May 2019 13:09:15 +0000 (15:09 +0200)]
net: phy: enable interrupts when PHY is attached already
This patch is a step towards allowing PHY drivers to handle more
interrupt sources than just link change. E.g. several PHY's have
built-in temperature monitoring and can raise an interrupt if a
temperature threshold is exceeded. We may be interested in such
interrupts also if the phylib state machine isn't started.
Therefore move enabling interrupts to phy_request_interrupt().
v2:
- patch added to series
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon [Thu, 30 May 2019 12:20:40 +0000 (15:20 +0300)]
qed: Fix static checker warning
In some cases abs_ppfid could be printed without being initialized.
Fixes: 79284adeb99e ("qed: Add llh ppfid interface and 100g support for offload protocols")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Thu, 30 May 2019 06:09:07 +0000 (09:09 +0300)]
net: dsa: Add error path handling in dsa_tree_setup()
In case a call to dsa_tree_setup() fails, an attempt to cleanup is made
by calling dsa_tree_remove_switch(), which should take care of
removing/unregistering any resources previously allocated. This does not
happen because it is conditioned by dst->setup being true, which is set
only after _all_ setup steps were performed successfully.
This is especially interesting when the internal MDIO bus is registered
but afterwards, a port setup fails and the mdiobus_unregister() is never
called. This leads to a BUG_ON() complaining about the fact that it's
trying to free an MDIO bus that's still registered.
Add proper error handling in all functions branching from
dsa_tree_setup().
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 29 May 2019 23:33:23 +0000 (16:33 -0700)]
net: don't clear sock->sk early to avoid trouble in strparser
af_inet sets sock->sk to NULL which trips strparser over:
BUG: kernel NULL pointer dereference, address:
0000000000000012
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 7 PID: 0 Comm: swapper/7 Not tainted
5.2.0-rc1-00139-g14629453a6d3 #21
RIP: 0010:tcp_peek_len+0x10/0x60
RSP: 0018:
ffffc02e41c54b98 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
ffff9cf924c4e030 RCX:
0000000000000051
RDX:
0000000000000000 RSI:
000000000000000c RDI:
ffff9cf97128f480
RBP:
ffff9cf9365e0300 R08:
ffff9cf94fe7d2c0 R09:
0000000000000000
R10:
000000000000036b R11:
ffff9cf939735e00 R12:
ffff9cf91ad9ae40
R13:
ffff9cf924c4e000 R14:
ffff9cf9a8fcbaae R15:
0000000000000020
FS:
0000000000000000(0000) GS:
ffff9cf9af7c0000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000012 CR3:
000000013920a003 CR4:
00000000003606e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<IRQ>
strp_data_ready+0x48/0x90
tls_data_ready+0x22/0xd0 [tls]
tcp_rcv_established+0x569/0x620
tcp_v4_do_rcv+0x127/0x1e0
tcp_v4_rcv+0xad7/0xbf0
ip_protocol_deliver_rcu+0x2c/0x1c0
ip_local_deliver_finish+0x41/0x50
ip_local_deliver+0x6b/0xe0
? ip_protocol_deliver_rcu+0x1c0/0x1c0
ip_rcv+0x52/0xd0
? ip_rcv_finish_core.isra.20+0x380/0x380
__netif_receive_skb_one_core+0x7e/0x90
netif_receive_skb_internal+0x42/0xf0
napi_gro_receive+0xed/0x150
nfp_net_poll+0x7a2/0xd30 [nfp]
? kmem_cache_free_bulk+0x286/0x310
net_rx_action+0x149/0x3b0
__do_softirq+0xe3/0x30a
? handle_irq_event_percpu+0x6a/0x80
irq_exit+0xe8/0xf0
do_IRQ+0x85/0xd0
common_interrupt+0xf/0xf
</IRQ>
RIP: 0010:cpuidle_enter_state+0xbc/0x450
To avoid this issue set sock->sk after sk_prot->close.
My grepping and testing did not discover any code which
would depend on the current behaviour.
Fixes: c46234ebb4d1 ("tls: RX path for ktls")
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 29 May 2019 22:36:10 +0000 (15:36 -0700)]
net-gro: fix use-after-free read in napi_gro_frags()
If a network driver provides to napi_gro_frags() an
skb with a page fragment of exactly 14 bytes, the call
to gro_pull_from_frag0() will 'consume' the fragment
by calling skb_frag_unref(skb, 0), and the page might
be freed and reused.
Reading eth->h_proto at the end of napi_frags_skb() might
read mangled data, or crash under specific debugging features.
BUG: KASAN: use-after-free in napi_frags_skb net/core/dev.c:5833 [inline]
BUG: KASAN: use-after-free in napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841
Read of size 2 at addr
ffff88809366840c by task syz-executor599/8957
CPU: 1 PID: 8957 Comm: syz-executor599 Not tainted 5.2.0-rc1+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188
__kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
kasan_report+0x12/0x20 mm/kasan/common.c:614
__asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:142
napi_frags_skb net/core/dev.c:5833 [inline]
napi_gro_frags+0xc6f/0xd10 net/core/dev.c:5841
tun_get_user+0x2f3c/0x3ff0 drivers/net/tun.c:1991
tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2037
call_write_iter include/linux/fs.h:1872 [inline]
do_iter_readv_writev+0x5f8/0x8f0 fs/read_write.c:693
do_iter_write fs/read_write.c:970 [inline]
do_iter_write+0x184/0x610 fs/read_write.c:951
vfs_writev+0x1b3/0x2f0 fs/read_write.c:1015
do_writev+0x15b/0x330 fs/read_write.c:1058
Fixes: a50e233c50db ("net-gro: restore frag0 optimization")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 May 2019 21:47:14 +0000 (14:47 -0700)]
Merge branch 'Fixes-for-DSA-tagging-using-802-1Q'
Vladimir Oltean says:
====================
Fixes for DSA tagging using 802.1Q
During the prototyping for the "Decoupling PHYLINK from struct
net_device" patchset, the CPU port of the sja1105 driver was moved to a
different spot. This uncovered an issue in the tag_8021q DSA code,
which used to work by mistake - the CPU port was the last hardware port
numerically, and this was masking an ordering issue which is very likely
to be seen in other drivers that make use of 802.1Q tags.
A question was also raised whether the VID numbers bear any meaning, and
the conclusion was that they don't, at least not in an absolute sense.
The second patch defines bit fields inside the DSA 802.1Q VID so that
tcpdump can decode it unambiguously (although the meaning is now clear
even by visual inspection).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 29 May 2019 21:42:31 +0000 (00:42 +0300)]
net: dsa: tag_8021q: Create a stable binary format
Tools like tcpdump need to be able to decode the significance of fake
VLAN headers that DSA uses to separate switch ports.
But currently these have no global significance - they are simply an
ordered list of DSA_MAX_SWITCHES x DSA_MAX_PORTS numbers ending at 4095.
The reason why this is submitted as a fix is that the existing mapping
of VIDs should not enter into a stable kernel, so we can pretend that
only the new format exists. This way tcpdump won't need to try to make
something out of the VLAN tags on 5.2 kernels.
Fixes: f9bbe4477c30 ("net: dsa: Optional VLAN-based port separation for switches without tagging")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ioana Ciornei [Wed, 29 May 2019 21:42:30 +0000 (00:42 +0300)]
net: dsa: tag_8021q: Change order of rx_vid setup
The 802.1Q tagging performs an unbalanced setup in terms of RX VIDs on
the CPU port. For the ingress path of a 802.1Q switch to work, the RX
VID of a port needs to be seen as tagged egress on the CPU port.
While configuring the other front-panel ports to be part of this VID,
for bridge scenarios, the untagged flag is applied even on the CPU port
in dsa_switch_vlan_add. This happens because DSA applies the same flags
on the CPU port as on the (bridge-controlled) slave ports, and the
effect in this case is that the CPU port tagged settings get deleted.
Instead of fixing DSA by introducing a way to control VLAN flags on the
CPU port (and hence stop inheriting from the slave ports) - a hard,
perhaps intractable problem - avoid this situation by moving the setup
part of the RX VID on the CPU port after all the other front-panel ports
have been added to the VID.
Fixes: f9bbe4477c30 ("net: dsa: Optional VLAN-based port separation for switches without tagging")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 May 2019 21:39:25 +0000 (14:39 -0700)]
Merge branch 'r8169-fw'
Heiner Kallweit says:
====================
r8169: decouple firmware handling code from actual driver code
These two patches are a step towards eventually factoring out firmware
handling code to a separate source file.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 29 May 2019 19:15:06 +0000 (21:15 +0200)]
r8169: decouple rtl_phy_write_fw from actual driver code
This patch is a further step towards decoupling firmware handling from
the actual driver code. Firmware can be for PHY and/or MAC, and two
pairs of read/write functions are needed for handling PHY firmware and
MAC firmware respectively. Pass these functions via struct rtl_fw and
avoid the ugly switching of mdio_ops behind the back of rtl_writephy().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 29 May 2019 19:13:58 +0000 (21:13 +0200)]
r8169: improve rtl_fw_format_ok
Simplify the function a little bit and use strscpy() where appropriate.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 29 May 2019 18:52:03 +0000 (20:52 +0200)]
r8169: enable WoL speed down on more chip versions
Call the pll power down function also for chip versions 02..06 and
13..15. The MAC can't be powered down on these chip versions, but at
least they benefit from the speed-down power-saving if WoL is enabled.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matteo Croce [Wed, 29 May 2019 15:39:41 +0000 (17:39 +0200)]
sctp: deduplicate identical skb_checksum_ops
The same skb_checksum_ops struct is defined twice in two different places,
leading to code duplication. Declare it as a global variable into a common
header instead of allocating it on the stack on each function call.
bloat-o-meter reports a slight code shrink.
add/remove: 1/1 grow/shrink: 0/10 up/down: 128/-1282 (-1154)
Function old new delta
sctp_csum_ops - 128 +128
crc32c_csum_ops 16 - -16
sctp_rcv 6616 6583 -33
sctp_packet_pack 4542 4504 -38
nf_conntrack_sctp_packet 4980 4926 -54
execute_masked_set_action 6453 6389 -64
tcf_csum_sctp 575 428 -147
sctp_gso_segment 1292 1126 -166
sctp_csum_check 579 412 -167
sctp_snat_handler 957 772 -185
sctp_dnat_handler 1321 1132 -189
l4proto_manip_pkt 2536 2313 -223
Total: Before=
359297613, After=
359296459, chg -0.00%
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matteo Croce [Wed, 29 May 2019 15:13:48 +0000 (17:13 +0200)]
net: avoid indirect calls in L4 checksum calculation
Commit
283c16a2dfd3 ("indirect call wrappers: helpers to speed-up
indirect calls of builtin") introduces some macros to avoid doing
indirect calls.
Use these helpers to remove two indirect calls in the L4 checksum
calculation for devices which don't have hardware support for it.
As a test I generate packets with pktgen out to a dummy interface
with HW checksumming disabled, to have the checksum calculated in
every sent packet.
The packet rate measured with an i7-6700K CPU and a single pktgen
thread raised from 6143 to 6608 Kpps, an increase by 7.5%
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 29 May 2019 14:34:32 +0000 (22:34 +0800)]
net: dsa: sja1105: Make static_config_check_memory_size static
Fix sparse warning:
drivers/net/dsa/sja1105/sja1105_static_config.c:446:1: warning:
symbol 'static_config_check_memory_size' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Antoine Tenart [Wed, 29 May 2019 13:59:48 +0000 (15:59 +0200)]
net: mvpp2: fix bad MVPP2_TXQ_SCHED_TOKEN_CNTR_REG queue value
MVPP2_TXQ_SCHED_TOKEN_CNTR_REG() expects the logical queue id but
the current code is passing the global tx queue offset, so it ends
up writing to unknown registers (between 0x8280 and 0x82fc, which
seemed to be unused by the hardware). This fixes the issue by using
the logical queue id instead.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 May 2019 21:18:18 +0000 (14:18 -0700)]
Merge branch 'connection-tracking-support-for-bridge'
Pablo Neira Ayuso says:
====================
connection tracking support for bridge
This patchset adds native connection tracking support for the bridge.
Patch #1 and #2 extract code from IPv4/IPv6 fragmentation core and
introduce the fraglist splitter. That splits a skbuff fraglist into
independent fragments.
Patch #3 and #4 also extract code from IPv4/IPv6 fragmentation core
and introduce the skbuff into fragments transformer. This can be used
by linearized skbuffs (eg. coming from nfqueue and ct helpers) as well
as cloned skbuffs (that are either seen either with taps or with bridge
port flooding).
Patch #5 moves the specific IPCB() code from these new fragment
splitter/transformer APIs into the IPv4 stack. The bridge has a
different control buffer layout and it starts using this new APIs in
this patchset.
Patch #6 adds basic infrastructure that allows to register bridge
conntrack support.
Patch #7 adds bridge conntrack support (only for IPv4 in this patch).
Patch #8 adds IPv6 support for the bridge conntrack support.
Patch #9 registers the IPv4/IPv6 conntrack hooks in case the bridge
conntrack is used to deal with local traffic, ie. prerouting -> input
bridge hook path. This cover the bridge interface has a IP address
scenario.
Before this patchset, only chance for people to do stateful filtering is
to use the `br_netfilter` emulation layer, that turns bridge frame into
IPv4/IPv6 packets and inject them into the IPv4/IPv6 hooks. Apparently,
this module allows users to use iptables and all of its feature-set from
the bridge, including stateful filtering. However, this approach is
flawed in many aspects that have been discussed many times. This is a
step forward to deprecate `br_netfilter'.
v2: Fix English typo in commit message.
v3: Fix another English typo in commit message.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Wed, 29 May 2019 11:25:39 +0000 (13:25 +0200)]
netfilter: nf_conntrack_bridge: register inet conntrack for bridge
This patch enables IPv4 and IPv6 conntrack from the bridge to deal with
local traffic. Hence, packets that are passed up to the local input path
are confirmed later on from the {ipv4,ipv6}_confirm() hooks.
For packets leaving the IP stack (ie. output path), fragmentation occurs
after the inet postrouting hook. Therefore, the bridge local out and
postrouting bridge hooks see fragments with conntrack objects, which is
inconsistent. In this case, we could defragment again from the bridge
output hook, but this is expensive. The recommended filtering spot for
outgoing locally generated traffic leaving through the bridge interface
is to use the classic IPv4/IPv6 output hook, which comes earlier.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Wed, 29 May 2019 11:25:38 +0000 (13:25 +0200)]
netfilter: nf_conntrack_bridge: add support for IPv6
br_defrag() and br_fragment() indirections are added in case that IPv6
support comes as a module, to avoid pulling innecessary dependencies in.
The new fraglist iterator and fragment transformer APIs are used to
implement the refragmentation code.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Wed, 29 May 2019 11:25:37 +0000 (13:25 +0200)]
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Wed, 29 May 2019 11:25:36 +0000 (13:25 +0200)]
netfilter: nf_conntrack: allow to register bridge support
This patch adds infrastructure to register and to unregister bridge
support for the conntrack module via nf_ct_bridge_register() and
nf_ct_bridge_unregister().
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Wed, 29 May 2019 11:25:35 +0000 (13:25 +0200)]
net: ipv4: place control buffer handling away from fragmentation iterators
Deal with the IPCB() area away from the iterators.
The bridge codebase has its own control buffer layout, move specific
IP control buffer handling into the IPv4 codepath.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Wed, 29 May 2019 11:25:34 +0000 (13:25 +0200)]
net: ipv6: split skbuff into fragments transformer
This patch exposes a new API to refragment a skbuff. This allows you to
split either a linear skbuff or to force the refragmentation of an
existing fraglist using a different mtu. The API consists of:
* ip6_frag_init(), that initializes the internal state of the transformer.
* ip6_frag_next(), that allows you to fetch the next fragment. This function
internally allocates the skbuff that represents the fragment, it pushes
the IPv6 header, and it also copies the payload for each fragment.
The ip6_frag_state object stores the internal state of the splitter.
This code has been extracted from ip6_fragment(). Symbols are also
exported to allow to reuse this iterator from the bridge codepath to
build its own refragmentation routine by reusing the existing codebase.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Wed, 29 May 2019 11:25:33 +0000 (13:25 +0200)]
net: ipv4: split skbuff into fragments transformer
This patch exposes a new API to refragment a skbuff. This allows you to
split either a linear skbuff or to force the refragmentation of an
existing fraglist using a different mtu. The API consists of:
* ip_frag_init(), that initializes the internal state of the transformer.
* ip_frag_next(), that allows you to fetch the next fragment. This function
internally allocates the skbuff that represents the fragment, it pushes
the IPv4 header, and it also copies the payload for each fragment.
The ip_frag_state object stores the internal state of the splitter.
This code has been extracted from ip_do_fragment(). Symbols are also
exported to allow to reuse this iterator from the bridge codepath to
build its own refragmentation routine by reusing the existing codebase.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Wed, 29 May 2019 11:25:32 +0000 (13:25 +0200)]
net: ipv6: add skbuff fraglist splitter
This patch adds the skbuff fraglist split iterator. This API provides an
iterator to transform the fraglist into single skbuff objects, it
consists of:
* ip6_fraglist_init(), that initializes the internal state of the
fraglist iterator.
* ip6_fraglist_prepare(), that restores the IPv6 header on the fragment.
* ip6_fraglist_next(), that retrieves the fragment from the fraglist and
updates the internal state of the iterator to point to the next
fragment in the fraglist.
The ip6_fraglist_iter object stores the internal state of the iterator.
This code has been extracted from ip6_fragment(). Symbols are also
exported to allow to reuse this iterator from the bridge codepath to
build its own refragmentation routine by reusing the existing codebase.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso [Wed, 29 May 2019 11:25:31 +0000 (13:25 +0200)]
net: ipv4: add skbuff fraglist splitter
This patch adds the skbuff fraglist splitter. This API provides an
iterator to transform the fraglist into single skbuff objects, it
consists of:
* ip_fraglist_init(), that initializes the internal state of the
fraglist splitter.
* ip_fraglist_prepare(), that restores the IPv4 header on the
fragments.
* ip_fraglist_next(), that retrieves the fragment from the fraglist and
it updates the internal state of the splitter to point to the next
fragment skbuff in the fraglist.
The ip_fraglist_iter object stores the internal state of the iterator.
This code has been extracted from ip_do_fragment(). Symbols are also
exported to allow to reuse this iterator from the bridge codepath to
build its own refragmentation routine by reusing the existing codebase.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 May 2019 20:41:26 +0000 (13:41 -0700)]
Merge branch 'add-TFO-backup-key'
Jason Baron says:
====================
add TFO backup key
Christoph, Igor, and I have worked on an API that facilitates TFO key
rotation. This is a follow up to the series that Christoph previously
posted, with an API that meets both of our use-cases. Here's a
link to the previous work:
https://patchwork.ozlabs.org/cover/
1013753/
Changes in v2:
-spelling fixes in ip-sysctl.txt (Jeremy Sowden)
-re-base to latest net-next
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Baron [Wed, 29 May 2019 16:34:01 +0000 (12:34 -0400)]
selftests/net: add TFO key rotation selftest
Demonstrate how the primary and backup TFO keys can be rotated while
minimizing the number of client cookies that are rejected.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Baron [Wed, 29 May 2019 16:34:00 +0000 (12:34 -0400)]
Documentation: ip-sysctl.txt: Document tcp_fastopen_key
Add docs for /proc/sys/net/ipv4/tcp_fastopen_key
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Cc: Jeremy Sowden <jeremy@azazel.net>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Baron [Wed, 29 May 2019 16:33:59 +0000 (12:33 -0400)]
tcp: add support for optional TFO backup key to net.ipv4.tcp_fastopen_key
Add the ability to add a backup TFO key as:
# echo "x-x-x-x,x-x-x-x" > /proc/sys/net/ipv4/tcp_fastopen_key
The key before the comma acks as the primary TFO key and the key after the
comma is the backup TFO key. This change is intended to be backwards
compatible since if only one key is set, userspace will simply read back
that single key as follows:
# echo "x-x-x-x" > /proc/sys/net/ipv4/tcp_fastopen_key
# cat /proc/sys/net/ipv4/tcp_fastopen_key
x-x-x-x
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Baron [Wed, 29 May 2019 16:33:58 +0000 (12:33 -0400)]
tcp: add support to TCP_FASTOPEN_KEY for optional backup key
Add support for get/set of an optional backup key via TCP_FASTOPEN_KEY, in
addition to the current 'primary' key. The primary key is used to encrypt
and decrypt TFO cookies, while the backup is only used to decrypt TFO
cookies. The backup key is used to maximize successful TFO connections when
TFO keys are rotated.
Currently, TCP_FASTOPEN_KEY allows a single 16-byte primary key to be set.
This patch now allows a 32-byte value to be set, where the first 16 bytes
are used as the primary key and the second 16 bytes are used for the backup
key. Similarly, for getsockopt(), we can receive a 32-byte value as output
if requested. If a 16-byte value is used to set the primary key via
TCP_FASTOPEN_KEY, then any previously set backup key will be removed.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Baron [Wed, 29 May 2019 16:33:57 +0000 (12:33 -0400)]
tcp: add backup TFO key infrastructure
We would like to be able to rotate TFO keys while minimizing the number of
client cookies that are rejected. Currently, we have only one key which can
be used to generate and validate cookies, thus if we simply replace this
key clients can easily have cookies rejected upon rotation.
We propose having the ability to have both a primary key and a backup key.
The primary key is used to generate as well as to validate cookies.
The backup is only used to validate cookies. Thus, keys can be rotated as:
1) generate new key
2) add new key as the backup key
3) swap the primary and backup key, thus setting the new key as the primary
We don't simply set the new key as the primary key and move the old key to
the backup slot because the ip may be behind a load balancer and we further
allow for the fact that all machines behind the load balancer will not be
updated simultaneously.
We make use of this infrastructure in subsequent patches.
Suggested-by: Igor Lubashev <ilubashe@akamai.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christoph Paasch [Wed, 29 May 2019 16:33:56 +0000 (12:33 -0400)]
tcp: introduce __tcp_fastopen_cookie_gen_cipher()
Restructure __tcp_fastopen_cookie_gen() to take a 'struct crypto_cipher'
argument and rename it as __tcp_fastopen_cookie_gen_cipher(). Subsequent
patches will provide different ciphers based on which key is being used for
the cookie generation.
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 May 2019 19:59:53 +0000 (12:59 -0700)]
Merge branch 'mlxsw-Hardware-monitoring-enhancements'
Ido Schimmel says:
====================
mlxsw: Hardware monitoring enhancements
This patchset from Vadim provides various hardware monitoring related
improvements for mlxsw.
Patch #1 allows querying firmware version from the switch driver when
the underlying bus is I2C. This is useful for baseboard management
controller (BMC) systems that communicate with the ASIC over I2C.
Patch #2 improves driver's performance over I2C by utilizing larger
transactions sizes, if possible.
Patch #3 re-orders driver's initialization sequence to enforce a
specific firmware version before new firmware features are utilized.
This is a prerequisite for patches #4-#6.
Patches #4-#6 expose the temperature of inter-connect devices
(gearboxes) that are present in Mellanox SN3800 systems and split
2x50Gb/s lanes to 4x25Gb/s lanes.
Patches #7-#8 reduce the transaction size when reading SFP modules
temperatures, which is crucial when working over I2C.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Wed, 29 May 2019 08:47:22 +0000 (11:47 +0300)]
mlxsw: core: Reduce buffer size in transactions for SFP modules temperature readout
Obtain SFP modules temperatures through MTMP register instead of MTBR
register, because the first one utilizes shorter transaction buffer size
for request. It improves performance in case low frequency interface
(I2C) is used for communication with a chip.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Wed, 29 May 2019 08:47:21 +0000 (11:47 +0300)]
mlxsw: core: Extend the index size for temperature sensors readout
Extend sensor index size for Management Temperature Bulk Register
(MTBR) and Management Temperature Register (MTMP) upto 12 bits in
order to align registers description with new version of PRM document.
Add define for base sensor index for SFP modules temperature reading
for MTMP register.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Wed, 29 May 2019 08:47:20 +0000 (11:47 +0300)]
mlxsw: core: Extend hwmon interface with inter-connect temperature attributes
Add new attributes to hwmon object for exposing inter-connects temperature
input, highest, reset_history temperatures and label. Temperatures are read
from Management Temperature Register.
The number of inter-connect devices is read from Management General
Peripheral Information Register.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Wed, 29 May 2019 08:47:19 +0000 (11:47 +0300)]
mlxsw: reg: Add Management General Peripheral Information Register
Add MGPIR - Management General Peripheral Information Register, which
allows software to query the hardware and firmware general information
of peripheral entities as Gearboxes etc.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Wed, 29 May 2019 08:47:18 +0000 (11:47 +0300)]
mlxsw: reg: Extend sensor index field size of Management Temperature Register
Extend the size of sensor_index field of MTMP (Management Temperature
Register), from 8 to 12 bits due to hardware change.
Add define for sensor index for Gear Box (inter-connects) temperature
reading.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 29 May 2019 08:47:17 +0000 (11:47 +0300)]
mlxsw: core: Re-order initialization sequence
The driver core first registers with the hwmon and thermal subsystems
and only then proceeds to initialize the switch driver (e.g.,
mlxsw_spectrum). It is only during the last stage that the current
firmware version is validated and a newer one flashed, if necessary.
The above means that if a new firmware feature is utilized by the
hwmon/thermal code, the driver will not be able to load.
Solve this by re-ordering initializing the switch driver before
registering with the hwmon and thermal subsystems.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Shalom Toledo <shalomt@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Wed, 29 May 2019 08:47:16 +0000 (11:47 +0300)]
mlxsw: i2c: Allow flexible setting of I2C transactions size
Current implementation uses fixed size of I2C data transaction buffer.
Allow to set size of I2C transactions according to I2C physical adapter
capability. For that purpose adapter read and write size is obtained
from the I2C physical adapter and buffer size is set according to the
minimum of these two values. If adapter does not provide such info,
default buffer size is to be used.
It allows to improve performance of I2C access to silicon when long
size transactions are used.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Pasternak [Wed, 29 May 2019 08:47:15 +0000 (11:47 +0300)]
mlxsw: i2c: Extend initialization with querying firmware info
Extend initialization flow with query request for firmware info in
order to obtain firmware version info.
This info is to be provided to minimal driver to support ethtool
get_drvinfo() interface.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 May 2019 19:59:07 +0000 (12:59 -0700)]
Merge branch 'net-stmmac-selftests-Two-fixes'
Jose Abreu says:
====================
net: stmmac: selftests: Two fixes
Two fixes reported by kbuild.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 29 May 2019 08:30:26 +0000 (10:30 +0200)]
net: stmmac: selftests: Use kfree_skb() instead of kfree()
kfree_skb() shall be used instead of kfree(). Fix it.
Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jose Abreu [Wed, 29 May 2019 08:30:25 +0000 (10:30 +0200)]
net: stmmac: selftests: Fix sparse warning
Variable shall be __be16. Fix it.
Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Young Xiao [Wed, 29 May 2019 08:10:59 +0000 (16:10 +0800)]
ipv4: tcp_input: fix stack out of bounds when parsing TCP options.
The TCP option parsing routines in tcp_parse_options function could
read one byte out of the buffer of the TCP options.
1 while (length > 0) {
2 int opcode = *ptr++;
3 int opsize;
4
5 switch (opcode) {
6 case TCPOPT_EOL:
7 return;
8 case TCPOPT_NOP: /* Ref: RFC 793 section 3.1 */
9 length--;
10 continue;
11 default:
12 opsize = *ptr++; //out of bound access
If length = 1, then there is an access in line2.
And another access is occurred in line 12.
This would lead to out-of-bound access.
Therefore, in the patch we check that the available data length is
larger enough to pase both TCP option code and size.
Signed-off-by: Young Xiao <92siuyang@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 May 2019 19:30:47 +0000 (12:30 -0700)]
Merge branch 'mlxsw-Two-small-fixes'
Ido Schimmel says:
====================
mlxsw: Two small fixes
Patch #1 from Jiri fixes an issue specific to Spectrum-2 where the
insertion of two identical flower filters with different priorities
would trigger a warning.
Patch #2 from Amit prevents the driver from trying to configure a port
with a speed of 56Gb/s and autoneg off as this is not supported and
results in error messages from firmware.
Please consider patch #1 for stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Amit Cohen [Wed, 29 May 2019 07:59:45 +0000 (10:59 +0300)]
mlxsw: spectrum: Prevent force of 56G
Force of 56G is not supported by hardware in Ethernet devices. This
configuration fails with a bad parameter error from firmware.
Add check of this case. Instead of trying to set 56G with autoneg off,
return a meaningful error.
Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko [Wed, 29 May 2019 07:59:44 +0000 (10:59 +0300)]
mlxsw: spectrum_acl: Avoid warning after identical rules insertion
When identical rules are inserted, the latter one goes to C-TCAM. For
that, a second eRP with the same mask is created. These 2 eRPs by the
nature cannot be merged and also one cannot be parent of another.
Teach mlxsw_sp_acl_erp_delta_fill() about this possibility and handle it
gracefully.
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Fixes: c22291f7cf45 ("mlxsw: spectrum: acl: Implement delta for ERP")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rasmus Villemoes [Wed, 29 May 2019 07:02:11 +0000 (07:02 +0000)]
net: dsa: mv88e6xxx: fix handling of upper half of STATS_TYPE_PORT
Currently, the upper half of a 4-byte STATS_TYPE_PORT statistic ends
up in bits 47:32 of the return value, instead of bits 31:16 as they
should.
Fixes: 6e46e2d821bb ("net: dsa: mv88e6xxx: Fix u64 statistics")
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 29 May 2019 05:44:01 +0000 (07:44 +0200)]
r8169: fix MAC address being lost in PCI D3
(At least) RTL8168e forgets its MAC address in PCI D3. To fix this set
the MAC address when resuming. For resuming from runtime-suspend we
had this in place already, for resuming from S3/S5 it was missing.
The commit referenced as being fixed isn't wrong, it's just the first
one where the patch applies cleanly.
Fixes: 0f07bd850d36 ("r8169: use dev_get_drvdata where possible")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reported-by: Albert Astals Cid <aacid@kde.org>
Tested-by: Albert Astals Cid <aacid@kde.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Herbert Xu [Wed, 29 May 2019 05:40:26 +0000 (13:40 +0800)]
inet: frags: Remove unnecessary smp_store_release/READ_ONCE
The smp_store_release call in fqdir_exit cannot protect the setting
of fqdir->dead as claimed because its memory barrier is only
guaranteed to be one-way and the barrier precedes the setting of
fqdir->dead.
IOW it doesn't provide any barriers between fq->dir and the following
hash table destruction.
In fact, the code is safe anyway because call_rcu does provide both
the memory barrier as well as a guarantee that when the destruction
work starts executing all RCU readers will see the updated value for
fqdir->dead.
Therefore this patch removes the unnecessary smp_store_release call
as well as the corresponding READ_ONCE on the read-side in order to
not confuse future readers of this code. Comments have been added
in their places.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Wed, 29 May 2019 02:59:06 +0000 (10:59 +0800)]
net: mvpp2: cls: Remove unnessesary check in mvpp2_ethtool_cls_rule_ins
Fix smatch warning:
drivers/net/ethernet/marvell/mvpp2/mvpp2_cls.c:1236
mvpp2_ethtool_cls_rule_ins() warn: unsigned 'info->fs.location' is never less than zero.
'info->fs.location' is u32 type, never less than zero.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jisheng Zhang [Wed, 29 May 2019 02:26:07 +0000 (02:26 +0000)]
net: stmmac: Switch to devm_alloc_etherdev_mqs
Make use of devm_alloc_etherdev_mqs() to simplify the code.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 May 2019 18:36:15 +0000 (11:36 -0700)]
tua6100: Avoid build warnings.
Rename _P to _P_VAL and _R to _R_VAL to avoid global
namespace conflicts:
drivers/media/dvb-frontends/tua6100.c: In function ‘tua6100_set_params’:
drivers/media/dvb-frontends/tua6100.c:79: warning: "_P" redefined
#define _P 32
In file included from ./include/acpi/platform/aclinux.h:54,
from ./include/acpi/platform/acenv.h:152,
from ./include/acpi/acpi.h:22,
from ./include/linux/acpi.h:34,
from ./include/linux/i2c.h:17,
from drivers/media/dvb-frontends/tua6100.h:30,
from drivers/media/dvb-frontends/tua6100.c:32:
./include/linux/ctype.h:14: note: this is the location of the previous definition
#define _P 0x10 /* punct */
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 May 2019 18:34:38 +0000 (11:34 -0700)]
Merge tag 'mlx5-fixes-2019-05-28' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2019-05-28
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v4.13:
('net/mlx5: Allocate root ns memory using kzalloc to match kfree')
For -stable v4.16:
('net/mlx5: Avoid double free in fs init error unwinding path')
For -stable v4.18:
('net/mlx5e: Disable rxhash when CQE compress is enabled')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 May 2019 18:27:47 +0000 (11:27 -0700)]
Merge branch 'Enable-SFP-on-ACPI-based-systems'
Ruslan Babayev says:
====================
Enable SFP on ACPI based systems
Changes:
v2:
- more descriptive commit body
v3:
- made 'i2c_acpi_find_adapter_by_handle' static inline
v4:
- don't initialize i2c_adapter to NULL. Instead see below...
- handle the case of neither DT nor ACPI present as invalid.
- alphabetical includes.
- use has_acpi_companion().
- use the same argument name in i2c_acpi_find_adapter_by_handle()
in both stubbed and non-stubbed cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruslan Babayev [Tue, 28 May 2019 23:02:33 +0000 (16:02 -0700)]
net: phy: sfp: enable i2c-bus detection on ACPI based systems
Lookup I2C adapter using the "i2c-bus" device property on ACPI based
systems similar to how it's done with DT.
An example DSD describing an SFP on an ACPI based system:
Device (SFP0)
{
Name (_HID, "PRP0001")
Name (_CRS, ResourceTemplate()
{
GpioIo(Exclusive, PullDefault, 0, 0, IoRestrictionNone,
"\\_SB.PCI0.RP01.GPIO", 0, ResourceConsumer)
{ 0, 1, 2, 3, 4 }
})
Name (_DSD, Package ()
{
ToUUID ("
daffd814-6eba-4d8c-8a91-
bc9bbf4aa301"),
Package () {
Package () { "compatible", "sff,sfp" },
Package () { "i2c-bus", \_SB.PCI0.RP01.I2C.MUX.CH0 },
Package () { "maximum-power-milliwatt", 1000 },
Package () { "tx-disable-gpios", Package () { ^SFP0, 0, 0, 1} },
Package () { "reset-gpio", Package () { ^SFP0, 0, 1, 1} },
Package () { "mod-def0-gpios", Package () { ^SFP0, 0, 2, 1} },
Package () { "tx-fault-gpios", Package () { ^SFP0, 0, 3, 0} },
Package () { "los-gpios", Package () { ^SFP0, 0, 4, 1} },
},
})
}
Device (PHY0)
{
Name (_HID, "PRP0001")
Name (_DSD, Package ()
{
ToUUID ("
daffd814-6eba-4d8c-8a91-
bc9bbf4aa301"),
Package () {
Package () { "compatible", "ethernet-phy-ieee802.3-c45" },
Package () { "sfp", \_SB.PCI0.RP01.SFP0 },
Package () { "managed", "in-band-status" },
Package () { "phy-mode", "sgmii" },
},
})
}
Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
Cc: xe-linux-external@cisco.com
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ruslan Babayev [Tue, 28 May 2019 23:02:32 +0000 (16:02 -0700)]
i2c: acpi: export i2c_acpi_find_adapter_by_handle
This allows drivers to lookup i2c adapters on ACPI based systems similar to
of_get_i2c_adapter_by_node() with DT based systems.
Signed-off-by: Ruslan Babayev <ruslan@babayev.com>
Cc: xe-linux-external@cisco.com
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 30 May 2019 18:12:21 +0000 (11:12 -0700)]
Merge branch 'XDP-generic-fixes'
Stephen Hemminger says:
====================
XDP generic fixes
This set of patches came about while investigating XDP
generic on Azure. The split brain nature of the accelerated
networking exposed issues with the stack device model.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Tue, 28 May 2019 18:47:31 +0000 (11:47 -0700)]
net: core: support XDP generic on stacked devices.
When a device is stacked like (team, bonding, failsafe or netvsc) the
XDP generic program for the parent device was not called.
Move the call to XDP generic inside __netif_receive_skb_core where
it can be done multiple times for stacked case.
Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Hemminger [Tue, 28 May 2019 18:47:30 +0000 (11:47 -0700)]
netvsc: unshare skb in VF rx handler
The netvsc VF skb handler should make sure that skb is not
shared. Similar logic already exists in bonding and team device
drivers.
This is not an issue in practice because the VF devicex
does not send up shared skb's. But the netvsc driver
should do the right thing if it did.
Fixes: 0c195567a8f6 ("netvsc: transparent VF management")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Tranchetti [Tue, 28 May 2019 18:22:54 +0000 (12:22 -0600)]
udp: Avoid post-GRO UDP checksum recalculation
Currently, when resegmenting an unexpected UDP GRO packet, the full UDP
checksum will be calculated for every new SKB created by skb_segment()
because the netdev features passed in by udp_rcv_segment() lack any
information about checksum offload capabilities.
Usually, we have no need to perform this calculation again, as
1) The GRO implementation guarantees that any packets making it to the
udp_rcv_segment() function had correct checksums, and, more
importantly,
2) Upon the successful return of udp_rcv_segment(), we immediately pull
the UDP header off and either queue the segment to the socket or
hand it off to a new protocol handler.
Unless userspace has set the IP_CHECKSUM sockopt to indicate that they
want the final checksum values, we can pass the needed netdev feature
flags to __skb_gso_segment() to avoid checksumming each segment in
skb_segment().
Fixes: cf329aa42b66 ("udp: cope with UDP GRO packet misdirection")
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Anirudh Venkataramanan [Tue, 16 Apr 2019 17:35:03 +0000 (10:35 -0700)]
ice: Trivial cosmetic changes
This patch mostly capitalizes abbreviations in code comments. Fixed some
typos and removed some unnecessary newlines as well.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Anirudh Venkataramanan [Tue, 16 Apr 2019 17:35:02 +0000 (10:35 -0700)]
ice: Recognize higher speeds
In ice_print_link_msg, add cases for 50GB and 100GB speeds. This
results in the right speed being reported on load, instead of
"Unknownbps".
When VF link if forced (in ice_set_pfe_link_forced), report
max speed 100GB.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jacob Keller [Tue, 16 Apr 2019 17:35:01 +0000 (10:35 -0700)]
ice: Use a different ICE_DBG bit for firmware log messages
Replace the use of the ICE_DBG_AQ_MSG bit when dumping firmware logging
messages with a separate distinct type ICE_DBG_FW_LOG. This is useful
so that developers may enable ICE_DBG_FW_LOG and get firmware logging
messages, without also dumping AdminQ messages at the same time.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Anirudh Venkataramanan [Tue, 16 Apr 2019 17:35:00 +0000 (10:35 -0700)]
ice: Update function header
Add some details to the function header for ice_deinit_hw.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Anirudh Venkataramanan [Tue, 16 Apr 2019 17:34:59 +0000 (10:34 -0700)]
ice: Move define for ICE_AQC_DRIVER_UNLOADING
The define describing the bits for the struct field should be below
the field itself.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Anirudh Venkataramanan [Tue, 16 Apr 2019 17:34:58 +0000 (10:34 -0700)]
ice: Align to updated AQ command formats
The current specification has updates to the command formats for
manage MAC opcodes (opcodes 0x0107 and 0x0108) and get PHY caps
(opcode 0x0600). Update the code to reflect this.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
projects / openwrt / staging / blogic.git / log