staging: dgap: Remove module param and sysfs var rawreadok

This patch removes the rawreadok module param and sysfs var
previously used to enable flip buffer bypass. Code dealing
with that param was removed previously.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove unnecessary dgap_global_lock

dgap_global_lock is no longer required. This patch
removes it.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Don't remove sysfs group we failed to create

We should not remove a sysfs group we failed to create

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: fix some pr_warns with new lines in the string

This patch fixes some pr_warns that have newline
chars in the string because they mess up the
output.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Add curly braces back in for Multi-line indent block

Multi-line indent blocks get curly braces for readability.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: get rid of nasty DGAP_VERIFY_BOARD macro

This patch replaces the DGAP_VERIFY_BOARD macro with
the dgap_verify_board function because of checkpatch error.

Signed-off-by: Mark Hounschell <markh@compro.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Remove more degug/tracing code

This patch removes more, if not all, of the debug/tracing code

Signed-off-by: Mark Hounschell <markh@compro.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Fix various previously missed checkpatch errors

This patch fixes various small checkpatch errors
I missed in patches 01-10.

Remove check for kfree of brd->channels as kfree is safe.
Also there is no need to set it to NULL after freeing it.

Remove a useless cast for a kzalloc return value.

Remove double negative test in a white space fix line.

Signed-off-by: Mark Hounschell <markh@compro.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: Fix printk related errors as reported by checkpatch

This patch fixes some printk related errors report by checkpatch.

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:dgap: Fix externs should be avoided in .c files as reported by checkpatch

This patch fixes "externs should be avoided in .c files"
in dgap.c as reported by checkpatch

Signed-off-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: unisys: virthba: Add dependency on SCSI

If CONFIG_SCSI is not enabled, compiling virthba.c goes horribly wrong with
undefined symbols.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Give exported symbols unique names

Many exported symbols had very generic names.  This commit changes the names
so that they will be unique.

Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: remove unreferenced utility functions.

A number of functions were used for debug at one time but that code has been
removed.

Signed-off-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: cxt1e1: removed version string declaration

Removed the unneeded pmcc4_OSSI_release version string, as well as the now
unused 'release' element of the sbe_card_info struct.  This also resolves a
sparse "should it be static" warning.

Signed-off-by: Shaun Laing <shaun@xresource.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8712: fix an error test in start_drv_threads()

Testing for "if (IS_ERR(padapter->cmdThread) < 0)" doesn't make sense.
The kthread_run() function returns error pointers on error pointers on
error so it should just be "if (IS_ERR(padapter->cmdThread))".

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: fix some confusing indenting

These set off a static checker warning about "warn: add curly braces?",
but actually the code it correct, it's just the indenting which is
wrong.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: vhci_sysfs.c: check return value of sscanf

Added code to check return value of sscanf.

Signed-off-by: John de la Garza <john@jjdev.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.15c' of git://git./linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third IIO new drivers and cleanups series for 3.15.

New driver
* Xilinx XADC driver -  This has been ready for a while but was awaiting
  a device tree ack (or as it turns out 3+ weeks).

Cleanup
* Drop some unreachable code from mag3110 highlighted by smatch.

Fix
* vf610 - introduced this cycle - put a possible negative error code
  into an unsigned long. Another smatch find - this one promoted by
  guilt that Dan was busy fixing all our messups.

drivers: staging: rtl8187se: refactor wmm_param_update

The function rtl8180_wmm_param_update contained two blocks of code which
were nearly identical. This patch combines those two blocks into a
single function, to reduce code duplication, and do fix some
checkpatch.pl warnings about excessively long lines due to the large
number of indents that were needed for the original blocks of code.

Signed-off-by: Axel Rasmussen <axel.rasmussen1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8187se: wrap excessively long lines

Signed-off-by: Axel Rasmussen <axel.rasmussen1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8187se: fixed checkpatch.pl errors

The definition of the driver's ChannelPlan array produced a large number
of checkpatch.pl errors. This patch fixes all of them by adding spaces
and wrapping the resulting overly-long lines.

Signed-off-by: Axel Rasmussen <axel.rasmussen1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8187se: fixed broken indentation

A section of code in the function rtl8180_tx was indented for no reason,
causing numerous checkpatch.pl warnings.

Signed-off-by: Axel Rasmussen <axel.rasmussen1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8187se: wrap excessively long lines

Signed-off-by: Axel Rasmussen <axel.rasmussen1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8187se: wrap excessively long lines

Signed-off-by: Axel Rasmussen <axel.rasmussen1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8187se: wrap excessively long lines

Signed-off-by: Axel Rasmussen <axel.rasmussen1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8187se: refactor/clean signal smoothing

Signed-off-by: Axel Rasmussen <axel.rasmussen1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8187se: use netdev_* instead of prink

Signed-off-by: Axel Rasmussen <axel.rasmussen1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: s-Par driver documentation

Documentation for the set of s-Par drivers

Signed-off-by: Ken Cox <jkc@redhat.com>
Cc: Ben Romer <sparmaintainer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: virthba driver to access shared SCSI hba

The virthba module provides access to a shared SCSI host bus adapter
and one or more disk devices, by proxying SCSI commands between the
guest and the service partition that owns the shared SCSI adapter,
using a channel between the guest and the service partition. The disks
that appear on the shared bus are defined by the s-Par configuration
and enforced by the service partition, while the guest driver handles
sending commands and handling responses. Each disk is shared as a
whole to a guest. Sharing the bus adapter in this way provides
resiliency; should the device encounter an error, only the service
partition is rebooted, and the device is reinitialized. This allows
guests to continue running and to recover from the error.

Signed-off-by: Ken Cox <jkc@redhat.com>
Cc: Ben Romer <sparmaintainer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: virtpci driver

The virtpci module handles the bus functions for virthba, and virtnic.

Signed-off-by: Ken Cox <jkc@redhat.com>
Cc: Ben Romer <sparmaintainer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: visoruislib driver used to handle requests from virtpci

The visoruislib module is a support library, used to handle requests
from virtpci.

Signed-off-by: Ken Cox <jkc@redhat.com>
Cc: Ben Romer <sparmaintainer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: visorchannelstub driver to provide channel support routines

The visorchannelstub module provides support routines for storing and
retrieving data from a channel.

Signed-off-by: Ken Cox <jkc@redhat.com>
Cc: Ben Romer <sparmaintainer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: visorchipset driver to provide registration and other services

The visorchipset module receives device creation and destruction
events from the Command service partition of s-Par, as well as
controlling registration of shared device drivers with the s-Par
driver core. The events received are used to populate other s-Par
modules with their assigned shared devices. Visorchipset is required
for shared device drivers to function properly. Visorchipset also
stores information for handling dump disk device creation during
kdump.

In operation, the visorchipset module processes device creation and
destruction messages sent by s-Par's Command service partition through
a channel. These messages result in creation (or destruction) of each
virtual bus and virtual device. Each bus and device is also associated
with a communication channel, which is used to communicate with one or
more IO service partitions to perform device IO on behalf of the
guest.

Signed-off-by: Ken Cox <jkc@redhat.com>
Cc: Ben Romer <sparmaintainer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: visorchannel module

The visorchannel module is a support library that abstracts reading
and writing a channel in memory.

Signed-off-by: Ken Cox <jkc@redhat.com>
Cc: Ben Romer <sparmaintainer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: visorutil driver to provide common functionality to other s-Par drivers

The visorutil module is a support library required by all other s-Par
driver modules. Among its features it abstracts reading, writing, and
manipulating a block of memory.

Signed-off-by: Ken Cox <jkc@redhat.com>
Cc: Ben Romer <sparmaintainer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers:staging:ozwpan Replaced wrapper functions with actual spin lock function

* Replaced all the spin lock/unlock wrappers from oz_polling_lock_bh()
and oz_polllin_unlock_bh() with spin_lock_bh(&g_polling_lock) and
spin_unlock_bh(&g_polling_lock).Completely erased the wrappers defination
and declaration.
* declared g_polling_lock as global variable in header file and added comments to it.
Module builded successfully with sparse without warnings.

Signed-off-by: Surendra Patil <surendra.tux@gmail.com>
Acked-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-ethernet: add missing include

ethernet-mem was missing its own include file, causing sparse to complain
about undeclared global functions.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-ethernet: make global_register_lock static

Make global_register_lock static to eliminate a sparse warning.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-ethernet: make cvm_oct_free_tx_skbs static

Make cvm_oct_free_tx_skbs static to eliminate a sparse warning.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-ethernet: make num_packet_buffers static

Make num_packet_buffers static to eliminate a sparse warning.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon-ethernet: drop CONFIG_CAVIUM_OCTEON_NUM_PACKET_BUFFERS

We don't have such Kconfig option, so the current code is dead and
the documentation is wrong. Users can adjust this setting by using
module parameter or kernel command line, so we can delete this code.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ke_counter: update the MODULE_DESCRIPTION

Change the generic MODULE_DESCRIPTION text to something more specific
for this driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ke_counter: tidy up multi-line comments

Tidy up the multi-line comments to follow the CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ke_counter: add digital output support

The hardware has three digital output channels. Add the subdevice
support for these channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ke_counter: rename cnt_auto_attach()

For aesthetics, rename this function so ist has namespace associated
with the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ke_counter: fix ke_counter_insn_read()

The comedi core expects the (*insn_read) functions to read insn->n
values. Fix this function to work like the core expects.

The counters are actually 25-bit (24-bits + 1 sign bit). Instead of munging
the data when the sign bit is set just return the full 25-bit value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ke_counter: fix ke_counter_insn_write()

The comedi core expects the (*insn_write) functions to write insn->n
values. Fix this function to work like the core expects.

The counters are actually 25-bit (24-bits + 1 sign bit). The comedi core
validates that all the data is in range before calling the (*insn_write),
fix the subdevice maxdata so that the sign bit can actually be changed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ke_counter: tidy up the subdevice init

For aesthetics, add some whitespace to the subdevice init.

This driver does not support async commands so remove the dev->read_subdev
initialization.

Remove the commented out SDF_COMMON from the subdevice subev_flags.

Add the subdevice range_table initialization.

For aesthetics, rename the (*insn_{read,write}) functions so they have
namespace associated with the driver.

Remove the unnecessary comments about the (*insn_{read,write}) functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ke_counter: define the register map

Define the register map for the board and remove the magic values.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ke_counter: remove CNT_CARD_DEVICE_ID

This define is only used in the pci_device_id table and does not add
any significant clarity to the code. Remove the define and just open
code the value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: cxt1e1: Add extern keyword for sparse 'static' warning

Resolve sparse "warning: symbol '...' was not declared.  Should it be static?"
messages.  Includes "comet_tables.h", which contains extern declarations for
the variables defined in comet_tables.c.

Signed-off-by: Shaun Laing <shaun@xresource.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: cxt1e1: Fix line length over 80 characters in linux.c

clean up checkpatch.pl warnings:
 WARNING: Line length over 80 characters

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: cxt1e1: Fix no spaces at the start of a line in linux.c

clean up checkpatch.pl warnings:
 WARNING: please no spaces at the start of a line in

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: cxt1e1: remove space between function name and parenthesis

clean up checkpatch.pl warnings in linux.c:
 WARNING: space prohibited between function name
 and open parenthesis '('

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: cxt1e1: fix checkpatch errors with open brace '{'

clean up checkpatch.pl error:
 ERROR: that open brace { should be on the previous line

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: cxt1e1: fix checkpatch error 'assignment in if condition'

checkpatch.pl error:
 ERROR: do not use assignment in if condition

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: cxt1e1: Fix line length over 80 characters in hwprobe.c

clean up checkpatch.pl warnings:
 WARNING: Line length over 80 characters

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging:tidspbridge: Fixed braces, spaces and long line coding style

This patch applies following code style changes to the whole driver.

- Removing braces from single statements following a 'if' statement.
- Removing unnessasary spaces and braces from files.
- Re-order statements crossing 80 columns limitation.
- Fixed one quoted string split across lines.

Signed-off-by: Masood Mehmood <ody.guru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/usbip: change usbip userspace to include new uapi usbip.h

usbip userspace has duplicated enum definition to report usbip device
status maintained by the kernel. A new uapi usbip.h now defines the
usbip device status for kernel and userspace to use. Change usbip
userspace to include uapi usbip.h for usbip device status.

Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/usbip: change usbip to include new uapi usbip.h

usbip userspace has duplicated enum definition to report usbip device
status maintained by the kernel. A new uapi usbip.h now defines the
usbip device status for kernel and userspace to use. Change usbip
kernel space to include uapi usbip.h for usbip device status.

Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/usbip: add uapi header to export usbip kernel interfaces

usbip userspace has duplicated enum definition to report usbip device
status maintained by the kernel. Adding an usbip uapi header file will
define the kernel - userspace interface for this device status. This
new uapi file is added under usbip/uapi to keep the staging tree code
self-contained. When usbip moves to mainline drivers, this file should
be moved under uapi/linux

Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 3.14-rc5 into staging-next

We want those fixes in here

Linux 3.14-rc5

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "Not a huge amount happening, some MAINTAINERS updates, radeon, vmwgfx
  and tegra fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/vmwgfx: avoid null pointer dereference at failure paths
  drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
  drm/vmwgfx: Remove some unused surface formats
  drm/radeon: enable speaker allocation setup on dce3.2
  drm/radeon: change audio enable logic
  drm/radeon: fix audio disable on dce6+
  drm/radeon: free uvd ring on unload
  drm/radeon: disable pll sharing for DP on DCE4.1
  drm/radeon: fix missing bo reservation
  drm/radeon: print the supported atpx function mask
  MAINTAINERS: update drm git tree entry
  MAINTAINERS: add entry for drm radeon driver
  drm/tegra: Add guard to avoid double disable/enable of RGB outputs
  gpu: host1x: do not check previously handled gathers
  drm/tegra: fix typo 'CONFIG_TEGRA_DRM_FBDEV'

Merge tag 'usb-3.14-rc5' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are 2 USB patches for 3.14-rc5, one a new device id, and the
  other fixes a reported problem with threaded irqs and the USB EHCI
  driver"

* tag 'usb-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: ehci: fix deadlock when threadirqs option is used
  USB: ftdi_sio: add Cressi Leonardo PID

Merge tag 'driver-core-3.14-rc5' of git://git./linux/kernel/git/gregkh/driver-core

Pull sysfs fix from Greg KH:
 "Here is a single sysfs fix for 3.14-rc5.  It fixes a reported problem
  with the namespace code in sysfs"

* tag 'driver-core-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  sysfs: fix namespace refcnt leak

Merge tag 'staging-3.14-rc5' of git://git./linux/kernel/git/gregkh/staging

Pull staging tree fixes from Greg KH:
 "Here are a few IIO fixes, and a new device id for a staging driver for
  3.14-rc5.  All have been in linux-next for a while, I did a final
  merge to get the IIO fixes into this tree, they were incorrectly in
  the char-misc tree for a few weeks, and I forgot to tell you to pull
  them from there.  This makes it a single pull request for you"

* tag 'staging-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: r8188eu: Add new device ID
  staging:iio:adc:MXS:LRADC: fix touchscreen statemachine
  iio:gyro: bug on L3GD20H gyroscope support
  iio: cm32181: Change cm32181 ambient light sensor driver
  iio: cm36651: Fix read/write integration time function.

Merge branch 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

more radeon fixes

* 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: enable speaker allocation setup on dce3.2
  drm/radeon: change audio enable logic
  drm/radeon: fix audio disable on dce6+
  drm/radeon: free uvd ring on unload
  drm/radeon: disable pll sharing for DP on DCE4.1
  drm/radeon: fix missing bo reservation
  drm/radeon: print the supported atpx function mask

Merge iio fixes into staging-linus

These I forgot about before, but need to get into 3.14-final.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio:adc:vf610 ensure correct handing of interruption of wait for completion

Issue highlighted by smatch warning:

CHECK   drivers/iio/adc/vf610_adc.c
drivers/iio/adc/vf610_adc.c:466 vf610_read_raw() warn: unsigned 'ret' is never less than zero.

As wait_for_completion_interruptible_timeout can return -ERESTARTSTSYS, if
interrupted, ret must be signed.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Fugang Duan <B38611@freescale.com>

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "Misc fixes, most of them on the tooling side"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fix strict alias issue for find_first_bit
  perf tools: fix BFD detection on opensuse
  perf: Fix hotplug splat
  perf/x86: Fix event scheduling
  perf symbols: Destroy unused symsrcs
  perf annotate: Check availability of annotate when processing samples

Merge tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux into drm-fixes

A couple of minor fixes.

Pull request of 2014-03-02

* tag 'vmwgfx-fixes-3.14-2014-03-02' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: avoid null pointer dereference at failure paths
  drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
  drm/vmwgfx: Remove some unused surface formats

drm/vmwgfx: avoid null pointer dereference at failure paths

vmw_takedown_otable_base() and vmw_mob_unbind() check for
potential vmw_fifo_reserve() failure and print error message,
but then immediately dereference NULL pointer.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>

drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.

Backing mob contents is propagated to user-space, so make sure backing
mobs are cleared when allocated. This also accidently fix rendering errors
with celestia when emulating legacy mode.

Also update driver date.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

drm/vmwgfx: Remove some unused surface formats

These formats are deprecated.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Peter Anvin:
 "The VMCOREINFO patch I'll pushing for this release to avoid having a
  release with kASLR and but without that information.

  I was hoping to include the FPU patches from Suresh, but ran into a
  problem (see other thread); will try to make them happen next week"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, kaslr: add missed "static" declarations
  x86, kaslr: export offset in VMCOREINFO ELF notes

Merge git://git./linux/kernel/git/nab/target-pending

Pull SCSI target fixes from Nicholas Bellinger:
 "The bulk of the series are bugfixes for qla2xxx target NPIV support
  that went in for v3.14-rc1.  Also included are a few DIF related
  fixes, a qla2xxx fix (Cc'ed to stable) from Greg W., and vhost/scsi
  protocol version related fix from Venkatesh.

  Also just a heads up that a series to address a number of issues with
  iser-target active I/O reset/shutdown is still being tested, and will
  be included in a separate -rc6 PULL request"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  vhost/scsi: Check LUN structure byte 0 is set to 1, per spec
  qla2xxx: Fix kernel panic on selective retransmission request
  Target/sbc: Don't use sg as iterator in sbc_verify_read
  target: Add DIF sense codes in transport_generic_request_failure
  target/sbc: Fix sbc_dif_copy_prot addr offset bug
  tcm_qla2xxx: Fix NAA formatted name for NPIV WWPNs
  tcm_qla2xxx: Perform configfs depend/undepend for base_tpg
  tcm_qla2xxx: Add NPIV specific enable/disable attribute logic
  qla2xxx: Check + fail when npiv_vports_inuse exists in shutdown
  qla2xxx: Fix qlt_lport_register base_vha callback race

Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dma fixes from Vinod Koul:
 "This request brings you two small fixes.  First one for fixing
  dereference of freed descriptor and second for fixing sdma bindings
  for it to work for imx25.

  I was planning to send this about 10days ago but then I had to proceed
  on my paternity leave and didnt get chance to send this.  Now got a
  bit of time from dady duties :)"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dma: sdma: Add imx25 compatible
  dma: ste_dma40: don't dereference free:d descriptor

Merge tag 'pm+acpi-3.14-rc5' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI and power management fixes from Rafael Wysocki:
 "These three commits fix a recent intel_pstate regression and two old
  bugs that should be fixed in -stable too, one in the ACPI processor
  driver and one in the firmare loader.

  Specifics:

   - One of the recent intel_pstate driver fixes introduced a rounding
     error that on some systems causes the frequency to be stuck at the
     lowest level forever.  Fix from Dirk Brandewie.

   - The firmware_class driver's PM notifier doesn't handle the
     PM_RESTORE_PREPARE event during hibernation image restore and that
     leads to a deadlock on umhelper_sem in __usermodehelper_disable().
     Fix from Sebastian Capella.

   - acpi_processor_set_throttling() abuses set_cpus_allowed_ptr() in a
     nasty way which triggers the WARN_ON_ONCE() in wq_worker_waking_up()
     among other things.  Fix from Lan Tianyu"

* tag 'pm+acpi-3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / processor: Rework processor throttling with work_on_cpu()
  PM / hibernate: Fix restore hang in freeze_processes()
  intel_pstate: Change busy calculation to use fixed point math.

iio:adc: Add Xilinx XADC driver

The Xilinx XADC is a ADC that can be found in the series 7 FPGAs from Xilinx.
The XADC has a DRP interface for communication. Currently two different
frontends for the DRP interface exist. One that is only available on the ZYNQ
family as a hardmacro in the SoC portion of the ZYNQ. The other one is available
on all series 7 platforms and is a softmacro with a AXI interface. This driver
supports both interfaces and internally has a small abstraction layer that hides
the specifics of these interfaces from the main driver logic.

The ADC has a couple of internal channels which are used for voltage and
temperature monitoring of the FPGA as well as one primary and up to 16 channels
auxiliary channels for measuring external voltages. The external auxiliary
channels can either be directly connected each to one physical pin on the FPGA
or they can make use of an external multiplexer which is responsible for
multiplexing the external signals onto one pair of physical pins.

The voltage and temperature monitoring channels also have an event capability
which allows to generate a interrupt when their value falls below or raises
above a set threshold.

Buffered sampling mode is supported by the driver, but only for AXI-XADC since
the ZYNQ XADC interface does not have capabilities for supporting buffer mode
(no end-of-conversion interrupt). If buffered mode is supported the driver will
register two triggers. One "xadc-samplerate" trigger which will generate samples
with the configured samplerate. And one "xadc-convst" trigger which will
generate one sample each time the CONVST (conversion start) signal is asserted.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: tidspbridge: fixed space coding style

- Adjusted pointer's '*' declaration to the data_type.
- Added space after 'if' keyword

Signed-off-by: Masood Mehmood <ody.guru@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devicetree: Add Xilinx XADC binding documentation

The Xilinx XADC is a ADC that can be found in the series 7 FPGAs from Xilinx.
The XADC has a DRP interface for communication. Currently two different
frontends for the DRP interface exist. One that is only available on the ZYNQ
family as a hardmacro in the SoC portion of the ZYNQ. The other one is available
on all series 7 platforms and is a softmacro with a AXI interface. This binding
document describes the bindings for both of them since the bindings are very
similar.

Each of them needs:
* A address range where the registers are mapped
* An interrupt number for the device interrupt
* A clock. For the the ZYNQ hardmacro interface this is the modules PCAP
  clock, for the AXI softmacro it is the AXI bus interface clock.

Additionally the bindings specify whether an external multiplexer is used and in
which mode it is used. The devicetree bindings also describe which external
channels are connected and in which configuration.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent build fixes for certain distro environments, from Arnaldo Carvalho de Melo:

  * Problem on recent gcc on x86-32 related to strict alias issue for
    find_first_bit (Jiri Olsa).

  * OpenSuSE: BFD detection problems related to not explicitely listing all
    required libraries (Andi Kleen)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

lustre/ptlrpc: rq_commit_cb is called for twice

If a ptlrpc_request is already on imp::imp_replay_list, when it's
replayed and replied, after_reply() will call req::rq_commit_cb
for the request, then call it again in ptlrpc_free_committed.

Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-on: http://review.whamcloud.com/8815
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3618
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/ptlrpc: skip rpcs that fail ptl_send_rpc

ptl_send_rpc is not dealing with -ENOMEM in some
situations.  When the ptl_send_rpc fails we need
set error and skip further processing or trigger
and LBUG

Signed-off-by: Keith Mannthey <keith.mannthey@intel.com>
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Reviewed-on: http://review.whamcloud.com/7411
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3698
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/ptlrpc: re-enqueue ptlrpcd worker

osc_extent_wait can be stuck in scenario like this:

1) thread-1 held an active extent
2) thread-2 called flush cache, and marked this extent as "urgent"
   and "sync_wait"
3) thread-3 wants to write to the same extent, osc_extent_find will
   get "conflict" because this extent is "sync_wait", so it starts
   to wait...
4) cl_writeback_work has been scheduled by thread-4 to write some
   other extents, it has sent RPCs but not returned yet.
5) thread-1 finished his work, and called osc_extent_release()->
   osc_io_unplug_async()->ptlrpcd_queue_work(), but found
   cl_writeback_work is still running, so it's ignored (-EBUSY)
6) thread-3 is stuck because nobody will wake him up.

This patch allows ptlrpcd_work to be rescheduled, so it will not
miss request anymore

Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-on: http://review.whamcloud.com/8922
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4509
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/ptlrpc: fix 'data race condition' issues

Fix 'data race condition' defects found by Coverity version
6.5.0:
Data race condition (MISSING_LOCK)
Accessing variable without holding lock. Elsewhere,
this variable is accessed with lock held.

Signed-off-by: Sebastien Buisson <sebastien.buisson@bull.net>
Reviewed-on: http://review.whamcloud.com/6575
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2744
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oeg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/quota: improper assert in osc_quota_chkdq()

In osc_quota_chkdq(), we should never try to access oqi found
from hash, since it could have been freed by osc_quota_setdq().

Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-on: http://review.whamcloud.com/8460
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4336
Reviewed-by: Johann Lombardi <johann.lombardi@intel.com>
Reviewed-by: Fan Yong <fan.yong@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/osc: Don't flush active extents.

The extent is active so we need to abort and let the caller
re-dirty the page. If we continued on here, and we were the
one making the extent active, we could deadlock waiting for
the page writeback to clear but it won't because the extent
is active and won't be written out.

Signed-off-by: Ann Koehler <amk@cray.com>
Reviewed-on: http://review.whamcloud.com/8278
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4253
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Alexey Lyashkov <alexey_lyashkov@xyratex.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/libcfs: warn if all HTs in a core are gone

libcfs cpu partition can't support CPU hotplug, but it is safe
when plug-in new CPU or enabling/disabling hyper-threading.
It has potential risk only if plug-out CPU because it may break CPU
affinity of Lustre threads.

Current libcfs will print warning for all CPU notification, this
patch changed this behavior and only output warning when we lost all
HTs in a CPU core which may have broken affinity of Lustre threads.

Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-on: http://review.whamcloud.com/8770
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4454
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/ldlm: set l_lvb_type coherent when layout is returned

In case layout has been packed into server reply when not
requested, lock l_lvb_type must be set accordingly.

Signed-off-by: Bruno Faccini <bruno.faccini@intel.com>
Reviewed-on: http://review.whamcloud.com/8270
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4194
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Johann Lombardi <johann.lombardi@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/llite: simplify dentry revalidate

Lustre client dentry validation is protected by LDLM lock, so
any time a dentry is found, it's valid and no need to revalidate
from MDS, and even it does, there is race that it may be
invalidated after revalidation is finished.

Signed-off-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-on: http://review.whamcloud.com/7475
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3544
Reviewed-by: Peng Tao <bergwolf@gmail.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/recovery: free open/close request promptly

- For the non-create open or committed open, the open request
  should be freed along with the close request as soon as the
  close done, despite that the transno of open/close is
  greater than the last committed transno known by client or not.

- Move the committed open request into another dedicated list,
  that will avoid scanning a huge replay list on receiving each
  reply (when there are many open files).

Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: Hongchao Zhang <hongchao.zhang@intel.com>
Reviewed-on: http://review.whamcloud.com/6665
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2613
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/mdc: fix bad ERR_PTR usage in mdc_locks.c

In mdc_intent_open_pack() return an ERR_PTR() rather than NULL when
ldlm_prep_enqueue_req() fails. In mdc_intent_getattr_async() check the
return value of mdc_intent_getattr_pack() using IS_ERR(). Clean up the
includes in mdc_locks.c.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/7886
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4078
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Nathaniel Clark <nathaniel.l.clark@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/clio: honor O_NOATIME

Add a ci_noatime bit to struct cl_io. In ll_io_init() set this bit if
O_NOATIME is set in f_flags. Ensure that this bit is propagated down
to lower layers. In osc_io_read_start() don't update atime if this bit
is set. Add sanity test 39n to check that passing O_NOATIME to open()
is honored.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/7442
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3832
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Tested-by: Maloo <whamcloud.maloo@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/mdc: use ibits_known mask for lock match

Before revalidating a lock on the client, mask the lock bits against
the lock bits supported by the server (ibits_known), so newer clients
will find valid locks given by older server versions.

Signed-off-by: Patrick Farrell <paf@cray.com>
Signed-off-by: Alexey Lyashkov <alexey_lyashkov@xyratex.com>
Reviewed-on: http://review.whamcloud.com/8636
Xyratex-bug-id: MRP-1583
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4405
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/mdc: comments on LOOKUP and PERM lock

Add more comments for MDS_INODELOCK_PERM and
MDS_INODELOCK_LOOKUP

Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/7937
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3240
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/llite: Do not send parent dir fid in getattr by fid

Sending getattr by fid in this case is pointless, as the parent
might havelong changed and we have no control over it, but it's
irrelevant anyway, since we already have the child fid.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-on: http://review.whamcloud.com/7910
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3240
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre/mdc: Check for all attributes validity in revalidate

GETATTR needs to return attributes protected by different bits, so
we need to ensure all we have locks with all of those bits, not
just UPDATE bit

Signed-off-by: Alexey Lyashkov <alexey_lyashkov@xyratex.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-on: http://review.whamcloud.com/6460
Xyratex-bug-id: MRP-1052
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3240
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: wangdi <di.wang@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: fix open lock matching in ll_md_blocking_ast()

In ll_md_blocking_ast() match open locks before all others, ensuring
that MDS_INODELOCK_OPEN is not cleared from bits by another open lock
with a different mode. Change the int flags parameter of
ll_md_real_close() to fmode_t fmode. Clean up verious style issues in
both functions.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Reviewed-on: http://review.whamcloud.com/8718
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4429
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>